37 370-003 Water-Tight Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling 370 F S 003 M 16 10 C 6 CONNECTOR DESIGNATORS A-F-H-L-S ROTATABLE COUPLING Product Series Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Connector Designator Strain Relief Style (B, C, E) Angle and Profile A = 90° B = 45° S = Straight Cable Entry (Tables IV, V) Shell Size (Table I) Basic Part No. Finish (Table II) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 6) A Thread (Table I) O-Ring Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 6) C Typ. (Table I) STYLE 2 (STRAIGHT See Note 1) E G (Table III) (Table III) .88 (22.4) Max F (Table III) H (Table III) STYLE 2 (45° & 90° See Note 1) STYLE B (Table IV) P STYLE C Medium Duty (Table IV) Clamping Bars J Cable Range © 2005 Glenair, Inc. K Cable Range K CAGE Code 06324 STYLE E Medium Duty (Table V) N (See Note 4) L Cable Range M Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 37 - Page 14 37 370-003 Water-Tight Cable Sealing Backshell with Strain Relief Low Profile - Rotatable Coupling See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. Dash No. 03 04 06 08 10 12 16 20 24 28 32 J Max 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.219 (31.0) 1.281 (32.5) 1.281 (32.5) 1.406 (35.7) 1.656 (42.1) 1.906 (48.4) 1.906 (48.4) 2.000 (50.8) K Max .812 (20.6) .937 (23.8) 1.062 (27.0) 1.188 (30.2) 1.312 (33.3) 1.562 (39.7) 1.750 (44.5) 2.250 (57.2) 2.375 (60.3) 2.625 (66.7) 2.812 (71.4) TABLE iV: CABLE ENTRY Cable Range N Ref Min Max .135 (3.4) .156 (4.0) .219 (5.6) .188 (4.8) .203 (5.2) .312 (7.9) .285 (7.2) .281 (7.1) .438 (11.1) .350 (8.9) .312 (7.9) .531 (13.5) .390 (9.9) .375 (9.5) .625 (15.9) .460 (11.7) .500 (12.7) .750 (19.1) .625 (15.9) .510 (13.0) .938 (23.8) .938 (23.8) .695 (17.7) 1.250 (31.8) .715 (18.2) 1.000 (25.4) 1.375 (34.9) .915 (23.2) 1.250 (31.8) 1.625 (41.3) 1.070 (27.2) 1.500 (38.1) 1.875 (47.6) P Max 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.031 (26.2) 1.094 (27.8) 1.219 (31.0) 1.219 (31.0) 1.344 (34.1) 1.547 (39.3) 1.547 (39.3) 1.734 (44.0) TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. H A-F-L-S 09 08 11 10 13 12 15 14 17 16 19 18 21 20 23 22 25 24 28 32 36 Dash No. 03 04 06 08 10 12 16 20 24 28 32 E Max .457 (11.6) .520 (13.2) .582 (14.8) .645 (16.4) .738 (18.7) .926 (23.5) .926 (23.5) 1.020 (25.9) 1.020 (25.9) 1.145 (29.1) 1.207 (30.7) 1.238 (31.4) L Max .739 (18.8) .739 (18.8) .739 (18.8) .739 (18.8) .791 (20.1) .880 (22.4) .901 (22.9) 1.031 (26.2) 1.250 (31.8) 1.250 (31.8) 1.312 (33.3) © 2005 Glenair, Inc. F Max 1.810 (46.0) 1.869 (47.5) 1.929 (49.0) 2.359 (59.9) 2.469 (62.7) 2.659 (67.5) 2.659 (67.5) 2.872 (72.9) 2.872 (72.9) 2.905 (73.8) 3.005 (76.3) 3.315 (84.2) G Max .500 (12.7) .595 (15.1) .610 (15.5) .700 (17.8) .885 (22.5) .975 (24.8) .975 (24.8) 1.125 (28.6) 1.125 (28.6) 1.225 (31.1) 1.575 (40.0) 1.775 (45.1) H Max 1.820 (46.2) 1.940 (49.3) 1.960 (49.8) 2.369 (60.2) 2.459 (62.5) 2.629 (66.8) 2.629 (66.8) 2.802 (71.2) 2.802 (71.2) 2.955 (75.1) 3.205 (81.4) 3.255 (82.7) TABLE V: CABLE ENTRY Cable Range M Max Min Max .812 (20.6) .156 (4.0) .219 (5.6) .937 (23.8) .188 (4.8) .312 (7.9) 1.062 (27.0) .281 (7.1) .438 (11.1) 1.188 (30.2) .312 (7.9) .531 (13.5) 1.312 (33.3) .375 (9.5) .625 (15.9) 1.562 (39.7) .500 (12.7) .750 (19.1) 1.750 (44.5) .625 (15.9) .938 (23.8) 2.250 (57.2) .938 (23.8) 1.250 (31.8) 2.375 (60.3) 1.000 (25.4) 1.375 (34.9) 2.625 (66.7) 1.250 (31.8) 1.625 (41.3) 2.812 (71.4) 1.500 (38.1) 1.875 (47.6) CAGE Code 06324 TABLE II: STANDARD FINISHES GLENAIR SYMBOL B C G M NF FINISH Cadmium Plate, Olive Drab Anodize, Black Hard Coat, Anodic Electroless Nickel Cadmium Plate, Olive Drab Over Electroless Nickel See Inside Back Cover for Additional Finish Options 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Saddles are bottomed on Clamp Ears. 5. Interface O-Ring not supplied with Connector Designator A. 6. Consult factory for shorter lengths on straight backshells. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 37 - Page 15