SPD5807 thru SPD5811 SPD5807SMS thru SPD5811SMS SPD5807ASMS thru SPD5811ASMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 6.0 AMPS 50 ─ 150 VOLTS 40 ns HYPERFAST RECOVERY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SPD __ __ __ │ │ │ │ │ │ │ │ │ │ └ │ └ Screening 2/ │ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Package Type __ = Axial Leaded SMS = Surface Mount Square Tab ASMS = SMS with .240” Max. Body Length Voltage/Family 5807 = 50V 5809 = 100V 5811 = 150V • • • • • • • • • FEATURES: Hyper Fast Reverse Recovery: 40ns Maximum 4/ PIV to 150 Volts (Voltages Up To 300V Available) Hermetically Sealed Low Forward Voltage Drop Void Free Chip Construction For High Efficiency Applications Available in Axial & Square Tab Versions TX, TXV, and S-Level Screening Available 2/ Replacement for: 1N 5807, US thru 1N5811, US MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage SPD5807 SPD5809 SPD5811 Average Rectified Forward Current (Resistive Load, 60Hz, Sine Wave, TA = 25°C ) Peak Surge Current (8.3 ms pulse, half sine wave, superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Operating & Storage Temperature Thermal Resistance Junction to Lead for Axial, L =.375" Junction to End Tab for Surface Mount NOTES: SYMBOL VALUE UNIT VRRM VRWM VR 50 100 150 Volts IO 6.0 Amps IFSM 125 Amps -65 to +175 °C 20 12 °C/W TJ and TSTG RθJL RθJE Axial Leaded 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. SMS 4/ IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0108B DOC SPD5807 thru SPD5811 SPD5807SMS thru SPD5811SMS SPD5807ASMS thru SPD5811ASMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS SYMBOL VALUE UNIT MAX IF = 6.0 Adc , TA = +25°C, 300μs pulse IF = 6.0 Adc , TA = -55°C, 300μs pulse VF1 VF2 0.975 1.08 Vdc Rated VR, TA = +25°C, 300μs pulse minimum Rated VR, TA =+100°C, 300μs pulse minimum IR1 IR2 20 1 μA mA CJ 100 pF trr 40 ns Instantaneous Forward Voltage Drop Reverse Leakage Current Junction Capacitance VR = 10 Vdc, f = 1MHz, TA = 25°C Reverse Recovery Time IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C Package Outlines: DIMENSIONS (inches) DIM. A B C D Minimum .130 --.038 1.000 DIMENSIONS (inches) Maximum .170 .240 .042 --- AXIAL Minimum .172 .200 .200 .020 .002 Maximum .180 .290 (SMS) .240 (ASMS) .035 --- DATA SHEET #: RC0108B DOC DIM. A B B C D SMS NOTES: 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. 4/ IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.