SPD205 thru SPD230 and SPD205SMS thru SPD230SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 2.0 AMPS 50 ─ 300 VOLTS 25 ns HYPERFAST RECOVERY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SPD __ __ __ │ │ └ Screening 2/ │ │ __ = Not Screened │ │ TX = TX Level │ │ TXV = TXV │ │ S = S Level │ │ │ └ Package Type __ = Axial Leaded │ SMS = Surface Mount Square Tab │ │ └ Voltage/Family 205 = 50V 210 = 100V 220 = 200V 230 = 300V • • • • • • • • FEATURES: Hyper Fast Reverse Recovery: 25ns Maximum 4/ PIV to 300 Volts Hermetically Sealed Low Forward Voltage Drop Void Free Chip Construction For High Efficiency Applications Available in Axial & Square Tab Versions TX, TXV, and S-Level Screening Available2/ Replacement for: 1N 5802, US thru 1N5806, US MAXIMUM RATINGS 3/ RATING Peak Repetitive Reverse Voltage And DC Blocking Voltage Average Rectified Forward Current SPD205 SPD210 SPD220 SPD230 (Resistive Load, 60Hz, Sine Wave, TA = 25°C) Peak Surge Current (8.3ms pulse, half sine wave superimposed on Io, allow junction to reach equilibrium between pulses, TA = 25°C) Operating & Storage Temperature Thermal Resistance Junction to Lead for Axial, L =.375" Junction to End Tab for Surface Mount NOTES: SYMBOL VALUE UNIT VRRM VRWM VR 50 100 200 300 Volts IO 2.0 Amps IFSM 50 Amps -65 to +175 °C 38 25 °C/W TJ and TSTG RθJL RθJE Axial Leaded 1/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screening Based on MIL-PRF-19500. Screening Flows Available on Request. 3/ Unless Otherwise Specified, All Electrical Characteristics @25ºC. SMS 4/ IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0099F DOC SPD205 thru SPD230 and SPD205SMS thru SPD230SMS Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 3/ CHARACTERISTICS SYMBOL VALUE UNIT MAX Instantaneous Forward Voltage Drop IF = 2.0 Adc , TA = +25°C, 300 - 500μs pulse IF = 2.0 Adc , TA = -55°C, 300 - 500μs pulse VF1 VF2 1.0 (Rated VR, TA = +25°C) (Rated VR, TA =+100°C) IR1 IR2 10 1 μA mA CJ 45 pF trr 25 ns Reverse Leakage Current Junction Capacitance VR = 10 Vdc, f = 1MHz, TA = 25°C Maximum Reverse Recovery Time IF = 500mA, IR = 1A, IRR = 250mA, TA = 25°C Vdc 1.2 Package Outlines: DIMENSIONS (inches) DIM. A B C D Minimum --.190 .027 1.00 DIMENSIONS (inches) Maximum .140 .230 .033 --- AXIAL NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DIM. A B C D Minimum .134 .230 .022 .002 Maximum .155 .280 .028 --- SMS DATA SHEET #: RH0099F DOC