CAT6aJacks SS-60300 Series CAT6a PCB Mounted Jacks Features / Benefits • Easily compensated to CAT6a performance levels through an integrated flexible circuit board design (patent pending) • Flexible PCB design helps cancel Near End Cross Talk (NEXT) at the plug/jack interface • Design utilizes unique features to meet technical requirements of CAT6a • 45 degree, 90 degree, and 180 degree shielded and unshielded versions available • Minimal secondary compensation required due to the jack's construction • Selectively plated contacts with 50 micro-inches of gold • Designed for use in 10Gigabit Ethernet applications • UL 94-V0 plastic components Part Number Orientation Shield Type • Wave solder compatible SS-60300-014 180 Degree Panel Grounds • RoHS complaint Bel Stewart Connector GmbH Industriestrasse 20 61381 Friedrichsdorf Germany Tel 49-6172-9552-0 www.belstewart.com Bel Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327 Tel 717-235-7512 Fax 717-235-4675 www.belstewart.com SS-60300-016 180 Degree No Panel Grounds SS-60300-017 180 Degree Unshielded SS-60300-002 90 Degree Panel Grounds SS-60300-004 90 Degree No Panel Grounds SS-60300-021 90 Degree Unshielded SS-60300-023 45 Degree Panel Grounds SS-60300-024 45 Degree No Panel Grounds Bel Stewart’s SS-60300 Series CAT6a jacks are designed for use in CAT6a patch panels and wall outlets in premise wiring systems. Engineered to meet the 500 MHz requirements of the CAT6a specifications, the SS-60300 jacks provide a higher level of compensation to reach defined performance levels. Bel Stewart’s patent-pending design utilizes a flexible circuit board placed in close proximity to the modular plug/jack interface which provides capacitive compensation. Having the compensation close to the plug/jack interface helps to cancel the NEXT introduced to the jack from the modular plug. This makes further compensation to CAT6a on the main PCB much easier. The Bel Stewart design incorporating the flex circuit board still enables our jacks to maintain standard modular connector contact designs ensuring mechanical reliability. ©2008 Bel Stewart Connector Specifications subject to change without notice. 10.08 CAT6aJacks CAT6a Jack Application Performance Data -30 -30 -40 -40 -50 -50 -60 -60 NEXT (dB) NEXT (dB) Mated NEXT Pair 45-12 -70 -80 -80 -90 -100 -100 -110 -110 -120 1 10 Low Plug 45 degree, 90 degree, and 180 degree designs available in shielded and unshielded versions. Frequency (MHz) High Plug 100 1 1000 CAT6a Limit High Plug 100 1000 CAT6a Limit Mated NEXT Pair 12-78 -20 -30 -30 -40 -40 -50 -60 -50 NEXT (dB) NEXT (dB) Frequency (MHz) 10 Low Plug Mated NEXT Pair 45-36 -60 -70 -70 -80 -90 -80 -100 -90 -110 -100 -120 1 10 Low Plug Frequency (MHz) High Plug 100 CAT6a Limit 1 1000 Relaxed CAT6a Limit 10 Low Plug Mated NEXT Pair 45-78 -30 Frequency (MHz) High Plug 100 1000 100 1000 CAT6a Limit Mated NEXT Pair 36-78 -30 -40 -40 -50 -50 -60 -60 NEXT (dB) NEXT (dB) Bel Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327 Tel 717-235-7512 Fax 717-235-4675 www.belstewart.com -70 -90 -120 Bel Stewart Connector GmbH Industriestrasse 20 61381 Friedrichsdorf Germany Tel 49-6172-9552-0 www.belstewart.com Mated NEXT Pair 12-36 -70 -80 -70 -80 -90 -90 -100 -100 -110 -110 -120 -120 1 10 Low Plug Frequency (MHz) High Plug 100 CAT6a Limit 1000 1 10 Low Plug Frequency (MHz) High Plug CAT6a Limit ©2008 Bel Stewart Connector Specifications subject to change without notice. 10.08