CORCOM Product Guide Compact RFI Line Filter with DC Inlet Connector DA Series EN 60 950 UL Recognized CSA Certified TUV Approved DAF1 DAFP DA Series DAS1 Specifications The DA Series filters were designed as general purpose line filters for DC applications up to 125VDC. They are compact with a 3-pin inlet connector. They are available in 3, 6, 10 and 15 amp versions. They are flange mount with 1/4” or PCB terminals. The DA Series addresses the increasing need for DC rated filters with a standard DC power inlet. It was designed and first used for communication oriented customer premises equipment and central office equipment, but is not restricted to that. Any internal DC connection within larger multi-component systems, or external DC connection between user installed components which require filtering will benefit. Some examples include desktop servers, routers, switches, multiplexors, aggregators, concentrators, process control equipment as well as DC powered peripheral equipment. The DA Series mates with a standard MOLEX connector (HCS Series) which is readily available and better prevents accidental connection to AC power. Hipot rating (one minute): line-to-ground 2250 VDC line-to-line Rated voltage (max): Operating ambient temperature range @ rated current Ir : 1450 VDC 125 VDC -10˚C to +55˚C In an ambient, Ta, higher than +55˚C, the maximum 90 - Ta operating current, Io, is as follows: Io = Ir 35 Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Frequency-MHz Rating .05 .1 .15 .5 1 3 5 10 30 100 200 0 3A 0 6A 10A 15A 55 48 36 25 6 2 - 9 4 1 - 11 26 41 48 52 6 18 30 37 42 4 8 17 25 30 3 5 13 19 46 22 16 42 38 21 11 29 10 14 Line-to-line in 50 ohm circuit Electrical Schematic LINE LOAD Current Frequency-MHz Rating .05 .1 .15 .5 1 3 5 10 30 100 200 0 3A 0 6A 10A 15A 50 53 48 37 2 - 4 4 4 - 7 7 6 2 16 19 17 17 18 21 22 19 37 27 23 29 47 40 32 33 43 31 36 41 38 30 26 37 31 28 For higher amperage versions, contact Tyco Electronics. 148 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Compact RFI Line Filter with DC Inlet Connector (Continued) DA Series Case Styles Case Dimensions DAF1 A (max) B (max) C (max) 2.15 1.12 54.61 28.45 1.98 1.10 DAS1 50.29 27.94 1.54 1.12 DAFP 39.12 28.45 *represents Max. dimension 0.81 20.57 0.81 20.57 0.81 20.57 Part No. DAF1 C A D E Typical dimensions: Terminals: .250 [6.35] (3) Slot: .07 x .16 [1.8 x 3.8] (1) B Ground Holes: .07 [1.8] Dia.(2) D ±.010 ± .25 1.575 40.01 0.96* 24.38 1.575 40.01 E (max) 1.98 50.29 1.41 35.81 1.98 50.29 DAFP .551 Ground Part Numbers .380 Max. .537 Ref. C A D E B DAS1 10DAF1 10DAS1 10DAFP 15DAF1 15DAS1 15DAFP GA310 DC Filters Typical dimensions: Mounting holes: .132 [3.35] Dia. (2) with .260 [6.60] Dia. x 90˚C countersunk for #4 flathead screw. Pin Size: .031 x .06 ± .003 3DAF1 3DAS1 3DAFP 6DAF1 6DAS1 6DAFP DC Connector No. Mating Connectors A 0.23 max. Red Green/Yellow C D Black E B CORCOM Part Number: GA310 - Custom connector assembly with 3, 36” long 18 Rear View gauge wires to mate with DA Series filter Typical dimensions: Terminals: .250 [6.35] (3) Slot: .07 x .16 [1.8 x 3.8] (1) Holes: .07 [1.8] Dia.(2) MOLEX Component Part Numbers: Recommended Panel Cutout 03-12-1036 Connector housing to mate with DA Series 18-12-1222 Female Terminal (3 needed per housing) DAF PCB Layout (board viewed from component side) .820 20.8 .900 22.9 .140 Dia. (2) 3.56 1.200 30.48 1.575 40.01 .12 R 3.05 Back Mount 1.200 30.48 1.575 40.01 Ground .140 Dia. (2) 3.56 0.104 (3 holes) 2.64 .234 R 5.94 0.520 13.21 Front Mount DAS "A" 0.815 20.70 R 0.188 4.78 (4x) Panel Thickness 0.031 - 0.052 [.79 - 1.32] 0.046 - 0.068 [1.17 - 1.73] A Dim.±.002 1.260 [32.00] 1.350 [34.29] Center pin to panel .685±.015 17.40±.38 0.551 13.99 149 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com