This document was generated on 06/04/2010 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION Part Number: Status: 1120080008 Active Overview: Description: eNetMeter DN diagnostic tool for DeviceNet General Product Family Series Approvals Comments Communication Speed IP Rating Overview Product Name Type Field Attachable / Accessories 112008 ODVA, UL, CUL, CE eNetMeter DN; monitors approx. 9,500 parameters 10 / 100 Mbaud (Auto), 125, 250, 500 Kbaud IP20 enetmeter_dn DeviceNet* eNetMeter Physical Cable Diameter Coupling Type Diagnostics / LEDs Diagnostics Port Gender Keyway Material - Connector Body Material - Contact Material - Coupling Nut Material - Plating Mating Orientation Poles Temperature Range - Operating Wire Size AWG N/A N/A Yes Yes N/A N/A N/A N/A N/A n/a N/A N/A 0°C to +60°C N/A EU RoHS China RoHS ELV and RoHS Compliant REACH SVHC Not Reviewed Halogen-Free Status Not Reviewed Need more information on product environmental compliance? Email [email protected] For a multiple part number RoHS Certificate of Compliance, click here Please visit the Contact Us section for any non-product compliance questions. Search Parts in this Series 112008Series Electrical Current - Maximum per Contact Voltage - Maximum N/A 11-25V DC Material Info Old Part Number SST-ENM-DN1 Reference - Drawing Numbers Sales Drawing E-112008-0008 This document was generated on 06/04/2010 PLEASE CHECK WWW.MOLEX.COM FOR LATEST PART INFORMATION Continuously monitor a DeviceNet™ network; measure, analyze and record network parameters to minimize network downtime. eNetMeter™ for DeviceNet Diagnostic tool Features • Continuously monitors a DeviceNet network in a passive state • Provides feedback to an EtherNet/IP™ master or one of three methods to a personal computer (PC) residing on Ethernet X NetAlytix™ software X DLL interface X OPC server • High-speed sampling of network parameters X Signals are sampled millions of times per second providing extremely accurate values • Information captured includes: X Overall network status and measurements X X X X Individual node status and measurements Detailed measurements of power (V+, V-), signal (CANH, CANL) and shield parameters Overview BradCommunications™ eNetMeter™ DN is a passive device that continuously monitors a DeviceNet network and sends the information over Ethernet to a PLC or PC monitoring system. The information can be read directly by an EtherNet/IP™ master. Optionally, data can be accessed through ™ BradCommunications NetAlytix software, a DLL interface or an OPC server. Common mode voltage for entire network and each node Minimum / maximum and average values • Warning and Fault flags indicate when a value has exceeded a set tolerance (levels are customizable) • NetAlytix software enables fast device setup or USB port allows configuration without a PC • Compact design with DIN rail or panel mount option for quick and easy installation eNetMeter DN provides extremely accurate measurements of the network parameters using high-speed sampling. By comparing acceptable baseline measurements of a “good” network, it can predict imminent failures down to individual devices. Measurements can be used in such a way, that when an OPC status tag is analyzed and is found to be outside the acceptable limits, steps can be taken to repair the system prior to any downtime. eNetMeter DN can be used to diagnose current faults on a non-functioning network through the measurement of hundreds of network parameters. This can minimize downtime by pinpointing the node or location of the fault. The data can also be stored to historian software for future analysis. This is useful for companies typically involved with batching applications including pharmaceutical, food & beverage. If a problem occurs with a specific batch, the historical data can be viewed to see if any network problems occurred during the same time frame. This allows the company to then make any necessary adjustments to prevent reoccurrences from happening in the future. eNetMeter™ for DeviceNet Software Tools Specifications Hardware: Typical Good CAN Waveform* Diagnostic LEDs & Control Ready, System/Boot, Power & Comm; Reset (recessed) Operating Temperature 0 to 60°C Storage Temperature -5 to 75°C Humidity 5% to 95% non-condensing RoHS Compliant Yes Approvals CE, cULus (pending) Enclosure IP10 Mounting DIN rail or panel (screw) mounted USB USB 2.0 master, for transfer/storage of configuration parameters Network Specifications: Protocols DeviceNet, EtherNet/IP for reading data Cable DeviceNet: compatible with target network Ethernet: Cat 5e shielded Connector Ethernet : RJ45 ; DeviceNet : 5-pole M12 Micro-Change® Auxiliary power : screw terminal DeviceNet Power M12 Micro-Change 5-pole threaded connector - 11 to 25 VDC, 250 mA (typical @ 24 VDC) Isolation 500 V Data Rate DeviceNet: 125K, 250K and 500K baud; Ethernet: 10/100 M baud ™ NetAlytix CAN H/L Data Summary Indicating No Problems Ordering Information SAP Material Number Catalog Number 1120080008 SST-ENM-DN1 eNetMeter DN diagnostic tool for DeviceNet 1120080011 SST-NAS-DN1 NetAlytix software for eNetMeter DN (includes full application, DLL/API, OPC Server)n Product Description ™ ™ n NetAlytix Lite software is included with eNetMeter DN to allow setting of the IP address, parameter configuration, and other basic commissioning tasks. Dimensions : mm [inches] Typical CAN Frame Distortion with CAN H Shorted to Floating Shield* NetAlytix CAN H/L Data Summary Indicating Fall-time is out of tolerance (Yellow Warning State) * Signal captures were obtained using a digital storage oscilloscope on a typical DeviceNet network. To contact us: www.woodhead.com Reference Number: DW2008250 Date Published: September 2008 North America: US: + 1 800 225 7724 – Canada: +1 519 725 5136 Europe: France: +33 2 32 96 04 20 – Germany: +49 7252 94 96 0– Italy: +39 010 59 30 77 – United: Kingdom +44 1495 356300 Asia: Shanghai, China: +86 21-5835-9885 - Tianjin, China: +86 22-23321717 Singapore: +65 6268-6868 – Yamato, Japan: +81 46-265-2428 – Nagoya, Japan: +81 52-221-5950 Brad and Micro-Change are registered trademarks and BradCommunications, eNetMeter and NetAlytix are trademarks of Molex Incorporated. © 2008 Molex