STR91X-SK/KEI, STR7xx-SK/KEIL Keil starter kits for STR7 and STR9 Data Brief The Keil starter kits are complete solutions for starting application development and evaluating STMicroelectronic’s families of ARM® core-based microcontrollers. They come with all the hardware and software you need to start developing applications for the STR7 ARM7TDMI™ and STR9 ARM966E™ core-based microcontrollers. The kits come complete with evaluation board and target microcontroller, the Ulink™ USB-to-JTAG incircuit debugger/programmer Keil’s uVision3 integrated dev-elopment environment for ARM and the 16KB code-size limited version of the ARM RealView Compilation Tools. Starter kit architecture Ulink™– USB-to-JTAG in-circuit debugger/programmer integrates fully with uVision3, allowing users to download the application to the target and debug it while it runs on the ST ARM core-based microcontroller on the evaluation board. Evaluation board– an application board that provides a full range of features (I/Os, ADC, UART, SPI, USB...) to help users evaluate and start developing applications for the included microcontroller. Starter kit key features Ulink: Keil development software– a suite of software tools for developing and debugging applications for STR7 and STR9 including: uVision3 integrated development environment integrating the ARM RealView Compilation Tools and Keil’s debugging software so that users can quickly and easily develop and debug their applications while they run on a target microcontroller. ■ USB interface to the host PC ■ 20-pin JTAG application interface ■ Supports ARM7TDMI™ and ARM966E™ corebased microcontrollers Evaluation board: ■ ARM RealView Compilation Tools (RVCT) 16K code-size limited version of the optimizing C/C++ compiler for ARM™ core-based microcontrollers. October 2006 Rev 2 For further information contact your local STMicroelectronics sales office. Keil evaluation boards are available for STR710F, STR730F and STR91xF microcontrollers. Key features for these boards are summarized in Table 1: 1/4 www.st.com 4 STR91X-SK/KEI, STR7xx-SK/KEIL Table 1. Keil evaluation board key features Starter Kit Feature STR91X-SK/KEI STR750-SK/KEIL STR730 starter kit1 STR710 starter kit1 STR912FW4 STR750FV2 STR730FZ2 STR710FZ2 Yes Yes Yes Yes Yes (footprint) N/A N/A N/A External power supply included No No No (7-9V DC) No (7-9V DC) Power supply from USB Yes Yes No No Included microcontroller 20-pin JTAG interface connector 38-pin trace tool connector UART connector(s) 2 2 4 2 SPI Yes Yes Yes Yes I2C Yes Yes Yes No CAN connector Yes Yes Yes Yes USB connector Yes Yes No Yes Ethernet connector Yes No No No User LEDs 8 (Simple LEDs) 8 (Simple LEDs) 2 (7 segment LEDs) 8 (Simple LEDs) LCD display Yes (2x16) Yes (2x16) No No SD/MMC card connector Yes Yes No No Potentiometer connected to ADC Yes Yes Yes Yes 2 2 No No Reset button Yes Yes Yes Yes Wrap area Yes Yes Yes No User push button(s) 1 For information about ordering the STR710 and STR730 starter kits, refer to www.keil.com. Software CD with: uVision3 for ARM ■ RealView Compilation Tools (16KB codesize limited version of the ARM C/C++ compiler) ■ Keil full-featured debug interface with project manager, editor and built-in flash programming Ordering information Keil starter kits can be ordered from Keil and associated distributors and sales offices. The Keil starter kits for STR750xF (ST order code: STR750-SK/KEIL) and STR91xF (ST order code: STR91X-SK/KEI) is also available from STMicroelectronics and ST distributors. For more information and documentation, please refer to www.keil.com or the STMicroelectronics microcontroller support site, www.st.com/mcu. 2/4 STR91X-SK/KEI, STR7xx-SK/KEIL Revision history Date Revision Changes 14-Jun-2006 1 Initial release. 4-Oct-2006 2 Added STR750-SK/KEIL and product characteristics. 3/4 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 4/4