Composite Backshells 380-131 Composite Knit-Braid Style EMI/RFI Shield Termination Backshell with Strain-Relief Clamp and Rotatable Coupling A MIL-DTL-5015, -26482 Series II, and -83723 Series I and III F L H MIL-DTL-38999 Series I, II Finish Symbol Angle and Profile S - Straight CONNECTOR DESIGNATOR: Product Series 380 - EMI/RFI Non Environmental Backshells with Strain Relief (See Table III) Strain Relief Style SB - Shrink Boot Groove SBT - Shrink Boot Groove with boot supplied (Omit for none) Basic Part Number MIL-DTL-38999 Series 1.5 (JN1003) 380 MIL-DTL-38999 Series III and IV ROTATABLE COUPLING H S Connector Designator A, F, L and H 1.300 +.02 (33.0 + 0.5) 131 XM 15 - 01 Connector Shell Size (See Table II) A SB Cable Entry (See Table IV) B F E .390 (10.0) C D DIA Equally Spaced Holes to Accommodate Knit Braid 107-044 Self-Locking Rotatable Coupling TABLE II: SHELL SIZE Shell Shell Size Max Entry Size Max Entry F/L H Code** Code** A 08 09 00 08 01 10 11 01 10 02 12 13 02 12 03 14 15 03 14 04 16 17 04 16 05 18 19 05 18 06 20 21 06 20 07 22 23 07 22 08 24 25 08 24 09 Optional Shrink Boot Groove TABLE IV: CABLE ENTRY E F Number Entry D +.020 (0.50) +.020 (0.50) of Holes Code** +.010 (0.25) .512 (13.0) .880 (22.4) 2 00 .268 (6.8) .512 (13.0) .880 (22.4) 2 01 .354 (9.0) .512 (13.0) .940 (23.9) 2 02 .472 (12.0) .630 (16.0) 1.170 (29.7) 2 03 .591 (15.0) .630 (16.0) 1.280 (32.5) 2 04 .709 (18.0) .630 (16.0) 1.410 (35.8) 2 05 .837 (21.3) .630 (16.0) 1.500 (38.1) 2 06 .945 (24.0) .630 (16.0) 1.560 (39.6) 4 07 1.063 (27.0) .630 (16.0) 1.690 (42.9) 4 08 1.191 (30.3) .630 (16.0) 1.820 (46.2) 4 09 1.319 (33.5) Oval Holes, .256 (6.5) x .512 (13.0) Oval Holes, .315 (8.0) x .512 (13.0) Circular Holes, .512 (13.0) Diameter. E APPLICATION NOTES TABLE III: FINISH 1. Coupling nut and saddle bars supplied unplated. 2. Metric dimensions (mm) are in parentheses and are for reference only. 3. Consult factory for additional entry sizes available. 4. 5. Symbol Finish Description XM 2000 Hour Corrosion Resistant Electroless Nickel For angled part requirements, use in conjuncion with Glenair 327-060 Extenders. XMT 2000 Hour Corrosion Resistant Ni-PTFE, NickelFluorocarbon Polymer. 1000 Hour GreyTM See Table I in Intro for additional connector front-end dimensions. XW 2000 Hour Corrosion ResistantCadmium/Olive Drab over Electroless Nickel © 2009 Glenair, Inc. D CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-53 F G