Composite Backshells 447-711 Composite EMI/RFI Banding Backshell with Strain Relief and Self-Locking Rotatable Coupling Product Series 447 - EMI/RFI Non-Environmental Banding Backshells Drain Hole Option (Omit "D" if not required) Finish Symbol Connector Designator A, F, L, H, G and U 447 H S Shrink Boot Option Shrink boot and o-ring supplied with T option (Omit for none) (See Table III) Basic Part Number Slot Option S - Pigtail Termin. Slot (Omit for none) Band Option Band supplied with K option (Omit for none) Cable Entry (See Table IV) 711 XW 19 13 D S K P T S Angle and Profile S - Straight W - 90° Elbow Shield Termination Slot (Omit for none) Connector Shell Size (See Table II) Polysulfide Strips Termination area free of cadmium, XW finish only (Omit for none) TABLE IV: CABLE ENTRY Entry Entry Dia. Code ±.03 (0.8) 04 .250 (6.4) 05 .310 (7.9) 07 .420 (10.7) 09 .530 (13.5) 10 .630 (16.0) 12 .750 (19.1) 13 .810 (20.6) 15 .940 (23.9) 16 1.00 (25.4) 19 1.16 (29.5) X Dia. ±.03 (0.8) .51 (13.0) .51 (13.0) .51 (13.0) .63 (16.0) .63 (16.0) .63 (16.0) .63 (16.0) .63 (16.0) .63 (16.0) .63 (16.0) Y Dia. ±.03 (0.8) .875 (22.2) .936 (23.8) 1.172 (29.8) 1.281 (32.5) 1.406 (35.7) 1.500 (38.1) 1.562 (39.7) 1.687 (42.8) 1.812 (46.0) 1.912 (48.6) NOTE: Coupling Nut Supplied Unplated 1.28 (32.5) Anti-Decoupling Device F .67 (17.0) Typ. X Dia Entry Diameter Drain Holes (Optional) Shield Termination Slot- Typ. (Optional) G Shrink Sleeve or Boot Groove, Typ. ±.06 .69 .75 .81 .88 .94 .97 1.06 1.13 1.19 E (1.5) (17.5) (19.1) (20.6) (22.4) (23.9) (24.6) (26.9) (28.7) (30.2) ±.09 .88 1.00 1.13 1.31 1.38 1.44 1.63 1.75 1.88 F (2.3) (22.4) (25.4) (28.7) (33.3) (35.1) (36.6) (41.4) (44.5) (47.8) C D Raised Configuration (Mfr's Option) TABLE III: FINISH G ±.09 1.36 1.42 1.48 1.55 1.61 1.64 1.73 1.80 1.86 (2.3) (34.5) (36.1) (37.6) (39.4) (40.9) (41.7) (43.9) (45.7) (47.2) **Consult factory for additional entry sizes available. Consult factory for O-Ring to be supplied with part less shrink boot. © 2009 Glenair, Inc. B Y TABLE II: CONNECTOR SHELL SIZE Shell Size For Connector Designator* A F/L H G U 08 08 09 – – 10 10 11 – 08 12 12 13 11 10 14 14 15 13 12 16 16 17 15 14 18 18 19 17 16 20 20 21 19 18 22 22 23 – 20 24 24 25 23 22 E Anti-Decoupling Device A CAGE Code 06324 Max Entry Dash No.** 04 05 07 09 11 13 15 17 20 Symbol Finish Description XM 2000 Hour Corrosion Resistant Electroless Nickel XMT 2000 Hour Corrosion Resistant Ni-PTFE, Nickel-Fluorocarbon Polymer. 1000 Hour GreyTM XW 2000 Hour Corrosion Resistant Cadmium/ Olive Drab over Electroless Nickel Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] A-87 E F G