SPECIFICATION FOR APPROVAL REF :20080805-A PROD. NAME PAGE: 1 ABC'S DWG NO. SHIELDED SMD POWER INDUCTOR SU8030□□□□F□-□□□ ABC'S ITEM NO. Ⅰ﹒CONFIGURATION & DIMENSIONS： A : : C : D : E : F : G : H : I : 8.00 ±0.3 8.00 ±0.3 m/m m/m m/m m/m m/m m/m m/m m/m m/m 2.80 ±0.3 2.40 typ. 3.20 typ. 6.40 typ. 3.40 ref. 6.20 ref. 1.40 ref. I B 100 Marking White A B H I G H I G H D I I F or G D H I E I I G ( PCB Pattern suggestion ) Ⅱ﹒SCHEMATIC DIAGRAM： c a b Ⅲ﹒MATERIALS： a﹒Core：Ferrite DR core b﹒Core：Ferrite RI core c﹒Wire ：Enamelled copper wire ( Class F & H ) Peak Temp：260℃ max. d﹒Adhesive ：Epoxy resin Max time above 230℃ ：50sec max. Max time above 200℃ ：70sec max. e﹒Terminal：Ag/Ni/Sn Temperature Rising Area Preheat Area f﹒Remark：Products comply with RoHS' +4.0℃ / sec max. 150 ~ 200 ℃ / 60 ~ 120sec requirements d e Reflow Area +2.0 ~ 4.0℃ / sec max. Forced Cooling Area -(1.0 ~ 5.0)℃ / sec max. Peak Temperature: 260℃ 250 a﹒Temp. rise ：40℃ typ. b﹒Rated current： Base on temp. rise & △L / L0A=35% typ. c﹒Storage temp.：-40℃ ----+125℃ d﹒Operating temp.：-40℃----+105℃ e﹒Resistance to solder heat：260℃.10 secs. AR-001A 50sec max. Temperature ( ℃ ) Ⅳ﹒GENERAL SPECIFICATION： 230℃ 200 150 70sec max. 100 50 0 50 100 150 Time ( seconds ) 200 250 SPECIFICATION FOR APPROVAL REF : 20080804-A PROD. PAGE: 2 ABC'S DWG NO. SHIELDED SMD POWER INDUCTOR NAME SU8030□□□□F□-□□□ ABC'S ITEM NO. Ⅴ﹒ ELECTRICAL CHARACTERISTICS： DWG No. Inductance ( μH ) Q ref. SRF ( MHz ) typ. L(KHz) Q(MHz) Test Freq. RDC ( mΩ ) max. typ. Irms (A) Isat (A) SU80303R3YF□-□□□ 3.3±30％ 12 100 7.96 55.0 15.6 22.0 5.00 4.60 SU80304R7YF□-□□□ 4.7±30％ 10 100 7.96 42.0 22.0 30.0 4.60 3.80 SU80306R8YF□-□□□ 6.8±30％ 10 100 7.96 30.0 34.5 46.0 3.60 3.20 SU8030100YF□-□□□ 10.0±30％ 18 100 2.52 25.0 47.3 60.0 3.00 2.60 SU8030150YF□-□□□ 15.0±30％ 18 100 2.52 20.0 75.0 100.0 2.20 2.00 SU8030220YF□-□□□ 22.0±30％ 18 100 2.52 16.0 105.0 130.0 2.00 1.75 SU8030330YF□-□□□ 33.0±30％ 16 100 2.52 14.0 144.0 180.0 1.60 1.45 SU8030470YF□-□□□ 47.0±30％ 16 100 2.52 12.0 205.0 260.0 1.45 1.25 SU8030680YF□-□□□ 68.0±30％ 16 100 2.52 9.0 250.0 315.0 1.25 0.96 SU8030101YF□-□□□ 100.0±30％ 24 100 0.796 7.0 415.0 520.0 0.85 0.75 1)﹒ ：Packaging Information... A ：Bulk □□□ B ：Taping Reel 2)﹒"":Reference code 3)﹒Inductance Test Freq.：100KHz / 0.1V 4)﹒Isat base on △L / L0A=35% typ. 5)﹒Irms base on Temp. rise 40℃ typ. @ Inductance VS. DC Superposition Characteristics 1000 101 Inductance ( uH ) 100 470 100 10 3R3 1 0.1 0.01 AR-001A 0.1 1 DC Current ( A ) 10 SPECIFICATION FOR APPROVAL REF : 20080804-A PROD. PAGE: 3 ABC'S DWG NO. SHIELDED SMD POWER INDUCTOR NAME SU8030□□□□F□-□□□ ABC'S ITEM NO. Ⅵ﹒PACKAGING INFORMATION： ( 1 ) Configuration T Cover Tape N A B 2.0±0.5 ∮C ∮C D G Embossed carrier ※Carrier tape width : D 4 m/m P : 12 m/m End Start 100 100 Leader no component 200 m/m min. 100 100 100 Trailer no component 400 m/m min. Components User direction of feed ( 2 ) Dimensions Unit:m/m Style A B C D G 07 - 16 178 21±0.8 13 16 18 13 - 16 330 21±0.8 13±0.5 16 18 +0 +0 N 50 50 -0 -0 T 20.5 22.4 ( 3 ) Q'TY & G.W. Per package Inner : Reel Series AR-001A Q'TY (pcs) G.W. (gw) Outer : Carton Style Q'TY (pcs) G.W. (Kg) Size (cm) SU8030 400 500 07 - 16 12,000 17.5 42 x 41 x 24 SU8030 1,500 1,880 13 - 16 9,000 13.5 40 x 40 x 24 SPECIFICATION FOR APPROVAL REF : 20080804-A PROD. NAME PAGE: 4 SHIELDED SMD POWER INDUCTOR ABC'S DWG NO. SU8030□□□□F□-□□□ ABC'S ITEM NO. Ⅶ﹒DWGING NUMBER EXPRESSION： S U 8 0 3 0 Reference code Appendix code 2 : Package Appendix code 1 : Classification Tolerance code Electrical code Dimension code Type code Appendix code 1：Product Classification F：Lead Free Standard products comply with RoHS' requirements 1 ~ 9：Lead Free Special products comply with RoHS' requirements Appendix code 2：Package Information Code AR-001A Inner package Inner package Q'TY A T.B.D. T.B.D. B T / R ( Reel package ) 400 pcs C T / R ( Reel package ) 1,500 pcs Remark SPECIFICATION FOR APPROVAL REF : 20080804-A PROD. NAME PAGE: 5 SHIELDED SMD POWER INDUCTOR ABC'S DWG NO. SU8030□□□□F□-□□□ ABC'S ITEM NO. Ⅷ﹒RELIABILITY TEST： Test item Solderability Thermal shock test ( Temp. cycle ) Specification Test condition More than 95% of the terminal electrode Shall be covered With fresh solder. Preheat : 155 ℃ / 4 hours. Solder : Sn96.5 / Ag3 / Cu0.5 or equivalent Solder temp. : 235±5℃ Flux : Rosin Dip time : 5±0.5 seconds Electrical oharacteristics shall not change more than ±20% Room temp. 15 minutes -40 ℃ 30 minutes Room temp. 15 minutes +105 ℃ Total : 50 cycles Humidity test Temperature : 40±2℃ Humidity : 90±5% Time : 1000 hours High temp. Resistance test Temperature : 105±5℃ Applied current : Per spec. Time : 96 hours AR-001A 30 minutes SPECIFICATION FOR APPROVAL REF : 20080804-A PROD. NAME PAGE: 6 SHIELDED SMD POWER INDUCTOR ABC'S DWG NO. SU8030□□□□F□-□□□ ABC'S ITEM NO. Ⅸ﹒UL CARD： OBMW2 Magnet Wire-Component September 8, 2000 E174837 JUNG SHING WIRE CO LTD 231 CHUNG CHENG RD, SEC 3 JEN-TEH HSIANG, TAINAN HSIEN TAIWAN Mtl Dsg AIW CFUEWB EIAIW EILOCKY EILOCKW EIW EIW-2 FL.EILOCKY LSFFW LSUEW PEW PEY SF.FLW SF.EIW SF.BY@ SF.FLY@ SF.BLOCKBS SF.EILOCKY# SF.EILOCKBS SF.BW@ SFFW Mark Dsg ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ BC Polyamideimide Polyurethane Polyesterimide Polyesterimide Polyesterimide Polyesterimide Polyesterimide Modified Polyester Polyurethane Polyurethane Polyester Polyester Modified Polyester Polyesterimide Modified Polyester Modified Polyester Modified Polyester Polyesterimide Polyesterimide Mtl Dsg OC ____ ____ Polyamideimide Polyamide Modified Epoxy ____ ____ Polyamide ____ ____ ____ ____Nylon ____ Nylon Nylon Modified Polyamide Polyamide Modified Polyamide ____ Modified Polyester Polyurethane 287806002 SFFY UEW-1 UEW-2 UEW-4 UEY UEY-2 Coat Typ ANSI Type Temp Class MW81-C MW75C MW35C ___ ___ 220 130 200 180 200 ___ MW74-C ___ MW79-C ___ ___ MW24-C MW26C MW77C MW27-C MW27-C ___ ___ ___ 180 180 MW26C MW79 ____ ____ ____ ____ ____ BC Coat Typ OC Polyamide ____ ____ ____ Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane Polyurethane 155 155 A not-for-profit organization dedicated to public safety and committed to quality service Page 1 of 2 Mark Dsg ____ 220 200 155 155 130 155 155 155 180 155 155 155 Nylon Polyamide ANSI Type Temp Class MW80C MW2-C ___ 155 105 130 130 130 130 MW75C MW28-C MW28-C @-May be suffixed by LZ; # - May be suffixed by LZ, EL or LZI. LZ - Signifies magned wires twisted together; EL - signifies base coated magnet wire laid parallel with top coat applied overall; LZL - signifies base coated magnet wire twisted together and covered with top coat overall. Marking: Company name or trademarks or 榮星電線 , material designation or marked designation on packaed or reel, and Recognized Component Mark. See General Information Preceding These Recognitions For use only in equipment where the acceptability of the combination is determined by Underwriters Laboratories Inc. 287806002 AR-001A Page 2 of 2 OBMW2⁄E174837 September 8 , 2000 SPECIFICATION FOR APPROVAL REF :20080805-A PROD. NAME PAGE: 7 SHIELDED SMD POWER INDUCTOR OBMW2 Magnet Wire-Comporent ABC'S DWG NO. SU8030□□□□F□-□□□ ABC'S ITEM NO. August 27, 1999 E143312 ELEKTRISOLA (MALAYSLA) SDN BHD IALAN DAMN SATU IANDA BAIK 28750 BENTONG, PAHANG DARUL MAKMUR MALAYSIA Coating Type Mtl Dsg Mark Dsg BC Estersol 160 E180 Amldester 200 Polysol-N 155 A200 PN155 Polyesterimide (solderable) Polyesterimide Polyurechane Polysol 155 P155 Polyurechane Polysol 155g Polysol 155p Polysol 160 Polysol 180 Polysol 170 Polysol-N 180 Pg155 Pp155,Gp155 P160 P180 P170 or G170 PN180 Polyurechane Polyurechane Polyurechane Polyurechane Polyurechane Polyurechane OC ____ ____ Nylon ____ ____ ____ ____ ____ ____ Nylon ANSI Typ Temp Class MW-77 180 MW-74 MW-80, MW-28 MW-79, MW-79 MW-79 MW-79 MW-79 MW-79 MW-79 ____ 200 155, 100 155, 130 130 155 155 155 156 180 Marking：Dompany name/nateriel designation or marked designation and factory identification on package ok reel See General Information preceding These Recognitions For use only in equipment where the acceptability of the combination is determined by Underwriters Laboratories Inc. AR-001A