C A L I B E R SV Series Lead-Free RoHS Compliant Electronics Inc. PART NUMBERING GUIDE 14 Pin and 6 Pin / SMD / HCMOS / VCXO Oscillator Environmental/Mechanical Specifications on page F5 SV G - 25 C 27 3 A B T - 40.000MHz - A 5X7X1.7mm Max. G=4 Pad, H=6Pad (“A” pin conf. option avail.) Frequency Stability 100 = +/-100ppm, 50 = +/-50ppm, 25 = +/-25ppm, 15 = +/-15ppm, 10 = +/- 10ppm Frequency Pullability A = +/-10ppm, B = +/-30ppm, C = +/-50ppm D = +/-100ppm, E = +/- 150ppm Pin Configuration A= Pin 2 NC / Pin 5 Tristate Tristate Option Blank = No Connect, T = Trisate Linearity A = 20%, B = 15%, C = 10%, D = 5% Duty Cycle Blank = 40-60%, A= 45-55% Operating Temperature Range Blank= 0°C to 70°C, 48 = -40°C to 85°C Input Voltage Blank = 5.0V, 3=3.3V ELECTRICAL SPECIFICATIONS Revision: 2002-B Frequency Range 2.000MHz to 60.000MHz Operating Temperature Range 0°C to 70°C / -40°C to 85°C Storage Temperature Range -55°C to 100°C Supply Voltage 5.0Vdc ±5% or 3.3Vdc ±5% Aging (at 25°C) ±3ppm / year Maximum Load Drive Capability 15pF HCMOS Load Start Up Time 10mSeconds Maximum Linearity ±20%, ±15%, ±10%, ±5% Maximum Input Current 2.000MHz to 20.000MHz 20.001MHz to 40.000MHz 40.001MHz to 60.000MHz 10mA Maximum 20mA Maximum 30mA Maximum Pin 2 Tri-State Input Voltage or Pin 5 Tri-State Input Voltage No Connection VIH: >2.0Vdc VIL: <0.8Vdc Enables Output Enables Output Disables Output: High Impedance Pin 1 Control Voltage / Frequency Deviation 2.5Vdc ±2.0Vdc 2.5Vdc ±2.5Vdc 1.65Vdc ±1.65Vdc (or ±1.5Vdc ±10, ±, 30, ±50, ±100ppm Minimum ±10, ±, 30, ±50, ±100, ±150ppm Minimum ±10, ±, 30, ±50, ±100, ±150ppm Minimum One Sigma Clock Jitter <60.000MHz ±10pSeconds Maximum Absolute Clock Jitter <60.000MHz ±100pSeconds Maximum Frequency Tolerance / Stability Inclusive of Operating Temperature Range, Supply Voltage and Load ±50ppm, ±30ppm, ±20ppm (-10°C to 70°C max.), ±15ppm (-10°C to 70°C max.), ±10ppm (-10°C to 60° max.) Output Voltage Logic High (Voh) w/HCMOS Load 90% of Vdd Minimum Output Voltage Logic Low (Vol) w/HCMOS Load 10% of Vdd Maximum Rise Time / Fall Time 0.4Vdc to 2.4Vdc w/TTL Load; 20% to 80% of Waveform w/HCMOS Load 5nSeconds Maximum Duty Cycle @1.4Vdc w/TTL Load; @50% w/HCMOS Load @1.4Vdc w/TTL Load or w/HCMOS Load 50 ±10% (Standard) 50±5% (Optional) Frequency Deviation Over Control Voltage A=±50ppm Min. / B=±100ppm Min. / C=±150ppm Min. / D=±200ppm Min. / E=±250ppm Min. / F=±300ppm Min. / G=±350ppm Min. MECHANICAL DIMENSIONS Marking Guide on page F3-F4 1.4 ±0.2 Metal 5.0 Max 1.0 ±0.2 4 (X4 plcs.) Pin 1: Control Voltage (Vc) Pin 4: Case Ground TEL 949-366-8700 Metal 1.0 ±0.2 1 5.08 ±0.15 3 1.6 ±0.2 5.0 ±0.2 (X4 plcs.) 7.5 Max Ceramic 10mA Maximum (3.3V) 15mA Maximum (3.3V) 20mA Maximum (3.3V) (X6 plcs.) 7.0 ±0.2 2 2.20 ±0.15 Pin 2: Output Pin 3: Supply Voltage Ceramic Pin 1: Control Voltage (Vc) Pin 4: Output FAX 949-366-8707 1.7 Max. 1.4 ±0.2 (X6 plcs.) 6 1 5 2 4 3 5.08 ±0.15 2.20 ±0.15 Pin 2: Tri-State or N.C. Pin 5: N.C. or Tristate Pin 3: Ground Pin 6: Supply Voltage WEB http://www.caliberelectronics.com