Micrel, Inc. LOW-IMPEDANCE DRIVER FEATURES ■ ■ ■ ■ SY10EL12 SY100EL12 SY10EL12 SY100EL12 DESCRIPTION The SY10/100EL12 are low-impedance drive buffers. With two pairs of OR/NOR outputs, the devices are ideally suited for high drive applications such as memory addressing. These devices are functionally equivalent to the E112 devices, with higher performance capabilities. With propagation delays significantly faster than the E112, the EL12 is ideally suited for those applications which require the ultimate in AC performance. 290ps propagation delay Dual outputs for 25Ω drive applications Internal 75KΩ input pull-down resistors Available in 8-pin SOIC package PIN NAMES Pin M9999-031006 [email protected] or (408) 955-1690 Function D0, D1 Data Inputs Qa, Qb Data Outputs Rev.: G 1 1 Amendment: /0 Issue Date: March 2006 SY10EL12 SY100EL12 Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) Part Number Package Type Operating Range Package Marking Lead Finish SY10EL12ZC Z8-1 Commercial HEL12 Sn-Pb SY10EL12ZCTR(2) Z8-1 Commercial HEL12 Sn-Pb Qa 1 8 VCC Qb 2 7 D0 SY100EL12ZC Z8-1 Commercial XEL12 Sn-Pb Qa 3 6 D1 SY100EL12ZCTR(2) Z8-1 Commercial XEL12 Sn-Pb Qb 4 5 VEE SY10EL12ZI Z8-1 Industrial HEL12 Sn-Pb 8-Pin SOIC (Z8-1) SY10EL12ZITR(2) Z8-1 Industrial HEL12 Sn-Pb SY100EL12ZI Z8-1 Industrial XEL12 Sn-Pb SY100EL12ZITR(2) Z8-1 Industrial XEL12 Sn-Pb SY10EL12ZG(3) Z8-1 Industrial HEL12 with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EL12ZGTR(2, 3) Z8-1 Industrial HEL12 with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL12ZG(3) Z8-1 Industrial XEL12 with Pb-Free bar-line indicator Pb-Free NiPdAu SY100EL12ZGTR(2, 3) Z8-1 Industrial XEL12 with Pb-Free bar-line indicator Pb-Free NiPdAu Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-031006 [email protected] or (408) 955-1690 2 SY10EL12 SY100EL12 Micrel, Inc. DC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = –40°C Symbol IEE VEE IIH Parameter TA = 0°C TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Power Supply Current 10EL 100EL — — 14 14 17 17 11 11 14 14 17 17 11 11 14 14 17 17 11 13 14 16 17 20 Power Supply Voltage 10EL 100EL –4.75 –4.20 –5.2 –4.5 –5.5 –5.5 –5.5 –5.5 –4.75 –4.20 –5.2 –4.5 –5.5 –5.5 –4.75 –4.20 –5.2 –4.5 –5.5 –5.5 — — 150 150 — — 150 — — 150 Input HIGH Current Unit mA V –4.75 –5.2 –4.20 –4.5 — — µA AC ELECTRICAL CHARACTERISTICS VEE = VEE (Min.) to VEE (Max.); VCC = GND TA = –40°C Symbol Parameter TA = 0°C TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit tPLH tPHL Propagation Delay to Output D 120 280 500 170 280 450 180 290 450 210 320 480 ps tr tf Output Rise/Fall Times Q (20% to 80%) 150 350 550 150 350 550 150 350 550 150 350 550 ps M9999-031006 [email protected] or (408) 955-1690 3 SY10EL12 SY100EL12 Micrel, Inc. 8-PIN SOIC .150" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-031006 [email protected] or (408) 955-1690 4