Micrel, Inc. TTL-to-DIFFERENTIAL ECL TRANSLATOR FEATURES ■ ■ ■ ■ ■ SY100ELT24 SY100ELT24 DESCRIPTION 500ps typical propagation delay Differential ECL output PNP TTL input for minimal loading Flow-through pinouts Available in 8-pin SOIC package The SY100ELT24 is a TTL-to-differential ECL translator. Because ECL levels are used, a +5V, –5.2V (or –4.5V) and ground are required. The small outline 8lead SOIC package and the single gate of the ELT24 makes it ideal for those applications where performance, space and low power are at a premium. PIN NAMES Pin M9999-031506 [email protected] or (408) 955-1690 Function Q, Q Differential ECL Output D TTL Input VCC Positive Supply VEE Negative Supply GND Ground Rev.: C 1 Amendment: /0 Issue Date: March 2005 Micrel, Inc. SY100ELT24 PACKAGE/ORDERING INFORMATION Ordering Information(1) VEE 1 D 2 TTL NC NC 8 VCC 7 Q ECL 3 6 4 5 Q GND 8-Pin SOIC (Z8-1) Package Type Operating Range Package Marking Lead Finish SY100ELT24ZC Z8-1 Commercial XEL24 Sn-Pb SY100ELT24ZCTR(2) Z8-1 Commercial XEL24 Sn-Pb SY100ELT24ZI Z8-1 Industrial XEL24 Sn-Pb SY100ELT24ZITR(2) Z8-1 Industrial XEL24 Sn-Pb SY100ELT24ZG(3) Z8-1 Industrial XEL24 with Pb-Free bar-line indicator Pb-Free NiPdAu SY100ELT24ZGTR(2, 3) Z8-1 Industrial XEL24 with with Pb-Free bar-line indicator Pb-Free NiPdAu Part Number Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-031506 [email protected] or (408) 955-1690 2 Micrel, Inc. SY100ELT24 ABSOLUTE MAXIMUM RATINGS(1) Symbol Paramter TRUTH TABLE Value Unit D Q Q H H L VCC Power Supply Voltage –0.5 to +7.0 V VI TTL Input Voltage –0.5 to VCC V L L H II TTL Input Current –30 to +5.0 mA Open H L IOUT ECL Output Current — Continuous — Surge mA 50 100 +260 °C Storage Temperature –65 to +150 °C Operating Temperature –40 to +85 °C TLEAD Lead Temperature (soldering, 20sec.) Tstore TA NOTE: 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. DC ELECTRICAL CHARACTERISTICS VCC = 4.5V to 5.5V; VEE = –4.2V to –5.5V TA = –40°C Symbol Parameter TA = 0°C TA = +25°C TA = +85°C Min. Max. Min. Max. Min. Max. Min. Max. Unit Condition ICC Power Supply Current — 10 — 10 — 10 — 10 mA — IEE Power Supply Current — 20 — 20 — 20 — 20 mA No output load AC ELECTRICAL CHARACTERISTICS VCC = 4.5V to 5.5V; VEE = –4.2V to –5.5V TA = –40°C Symbol TA = 0°C TA = +25°C TA = +85°C Parameter Min. Max. Min. Max. Min. Typ. Max. Min. Max. Unit Condition tPLH tPHL Propagation Delay 300 900 300 900 300 500 900 300 900 ps 50Ω to –2.0V tr tf Output Rise/Fall Time 20% to 80% 200 700 200 700 200 300 700 200 700 ps 50Ω to –2.0V fMAX Maximum Input Frequency 200 — 200 — 200 — — 200 — MHz M9999-031506 [email protected] or (408) 955-1690 3 Micrel, Inc. SY100ELT24 TTL DC ELECTRICAL CHARACTERISTICS VCC = 4.5V to 5.5V; VEE = –4.2V to –5.5V TA = –40°C Symbol Parameter TA = 0°C TA = +25°C TA = +85°C Min. Max. Min. Max. Min. Max. Min. Max. Unit Condition VIH Input HIGH Voltage 2.0 — 2.0 — 2.0 — 2.0 — V — VIL Input LOW Voltage — 0.8 — 0.8 — 0.8 — 0.8 V — IIH Input HIGH Current — — 20 100 — — 20 100 — — 20 100 — — 20 100 µA VIN = 2.7V VIN = VCC IIL Input LOW Current — –0.6 — –0.6 — –0.6 — –0.6 mA VIN = 0.5V VIK Input Clamp Voltage — –1.2 — –1.2 — –1.2 — –1.2 V IIN = –18mA ECL DC ELECTRICAL CHARACTERISTICS VCC = 4.5V to 5.5V; VEE = –4.2V to –5.5V TA = –40°C Symbol Parameter TA = 0°C TA = +25°C TA = +85°C Min. Max. Min. Max. Min. Max. Min. Max. Unit Condition VOH Output HIGH Voltage –1085 –880 –1025 –880 –1025 –880 –1025 –880 mV 50Ω to –2.0V VOL Output LOW Voltage –1830 –1555 –1810 –1620 –1810 –1620 –1810 –1620 mV 50Ω to –2.0V M9999-031506 [email protected] or (408) 955-1690 4 Micrel, Inc. SY100ELT24 8-PIN SOIC .150" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408)474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2006 Micrel, Incorporated. M9999-031506 [email protected] or (408) 955-1690 5