ECL Pro™ 5V/3.3V DIFFERENTIAL AND/NAND Micrel ECLSY10EP05V Pro™ SY10EP05V FINAL FEATURES ■ ■ ■ ■ 3.3V or 5V power supply options 180ps typical propagation delay Maximum frequency >3GHz typical Internal input resistors: pulldown on D, pulldown and pullup on /D ■ Q output will default LOW with inputs open or at VEE ■ Transistor count: 126 ■ Available in 8-pin MSOP and SOIC packages ECL Pro™ DESCRIPTION The SY10EP05V is a 2-input differential AND/NAND gate. The device is functionally equivalent to the EL05 device. With AC performance much faster that the EL05 device, the EP05V is ideal for applications requiring the fastest AC performance available. PIN CONFIGURATION/BLOCK DIAGRAM PIN NAMES Pin Function D0 1 8 VCC D0, D1, /D0, /D1 ECL Data Inputs /D0 2 7 Q Q, /Q ECL Data Outputs D1 3 6 /Q /D1 4 5 VEE TRUTH TABLE Available in 8-Pin SOIC and MSOP Packages D0 D1 /D0 /D1 Q /Q L L H H L H L H H L L H H L L H L H H H L L H L ECL Pro is a trademark of Micrel, Inc. Rev.: C 1 Amendment: /0 Issue Date: March 2003 ECL Pro™ SY10EP05V Micrel ABSOLUTE MAXIMUM RATINGS(1) Symbol Rating Value Unit 6V V –6.0 to 0 +6.0 to 0 V V 50 100 mA VCC — VEE Power Supply Voltage VIN Input Voltage (VCC = 0V, VI not more negative than VEE) Input Voltage (VEE = 0V, VI not more positive than VCC) IOUT Output Current TA Operating Temperature Range –40 to +85 °C Tstore Storage Temperature Range –65 to +150 °C θJA Package Thermal Resistance (Junction-to-Ambient) –Still-Air (SOIC) –500lfpm (SOIC) 160 109 °C/W –Still-Air (MSOP) –500lfpm (MSOP) 206 155 °C/W (SOIC) (MSOP) 39 39 °C/W θJC Note 1. –Continuous –Surge Package Thermal Resistance (Junction-to-Case) Permanent device damage may occur if ABSOLUTE MAXIMUM RATINGS are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to ABSOLUTE MAXIMUM RATlNG conditions for extended periods may affect device reliability. PECL DC ELECTRICAL CHARACTERISTICS(1) VCC = 4.5V to 5.5V; VEE = 0V(2) TA = –40°C Symbol Parameter TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit IEE Power Supply Current(3) — 22 29 — 24 29 — 22 29 mA VOH Output HIGH Voltage(4) 3865 3940 4115 3930 4055 4180 3990 4115 4240 mV VOL Outuput LOW Voltage(4) 3050 3190 3315 3050 3255 3380 3050 3315 3440 mV VIH Input HIGH Voltage 3790 — 4115 3855 — 4180 3915 — 4240 mV VIL Input LOW Voltage 3065 — 3390 3130 — 3455 3190 — 3515 mV VIHCMR Input HIGH Voltage Common Mode Range 2.0 — VCC 2.0 — VCC 2.0 — VCC V IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA D /D Note 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. Note 2. Input and output parameters vary 1:1 with VCC. Note 3. VCC = 0V, VEE = VEE(min) to VEE(max), all other pins floating. Note 4. All loading with 50Ω to VCC –2.0V. 2 ECL Pro™ SY10EP05V Micrel LVPECL DC ELECTRICAL CHARACTERISTICS(1) VCC = 3.0V to 3.6V; VEE = 0V(2) TA = –40°C Symbol Parameter TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit IEE Power Supply Current(3) — 22 29 — 22 29 — 24 29 mA VOH Output HIGH Voltage(4) 2165 2240 2415 2230 2355 2480 2290 2415 2540 mV 1350 1490 1615 1350 1555 1680 1350 1615 1740 mV Voltage(4) VOL Outuput LOW VIH Input HIGH Voltage 2090 — 2415 2155 — 2480 2215 — 2540 mV VIL Input LOW Voltage 1365 — 1690 1430 — 1755 1490 — 1815 mV VIHCMR Input HIGH Voltage Common Mode Range 2.0 — VCC 2.0 — VCC 2.0 — VCC V IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA D /D Note 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. Note 2. Input and output parameters vary 1:1 with VCC. Note 3. VCC = 0V, VEE = VEE(Min) to VEE(Max), all other pins floating. Note 4. All loading with 50Ω to VCC –2.0V. ECL/LVECL DC ELECTRICAL CHARACTERISTICS(1) VCC = 0V, VEE = –5.5V to –3.0V(2) TA = –40°C Symbol IEE VOH Parameter Power Supply Output HIGH Current(3) Voltage(4) Voltage(4) TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — 22 29 — 22 29 — 22 29 mA –1135 –1060 –885 –1070 –945 –820 –1010 –885 –760 mV –1950 –1810 –1685 –1950 –1745 –1620 –1950 –1685 –1560 mV VOL Outuput LOW VIH Input HIGH Voltage –1210 — –885 –1145 — –820 –1085 — –760 mV VIL Input LOW Voltage –1935 — –1610 –1870 — –1545 –1810 — –1485 mV VIHCMR Input HIGH Voltage Common Mode Range VCC V IIH Input HIGH Current IIL Input LOW Current VEE+2.0 D /D VCC VEE+2.0 VCC VEE+2.0 — — 150 — — 150 — — 150 µA 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA Note 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. Note 2. Input and output parameters vary 1:1 with VCC. Note 3. VCC = 0V, VEE = VEE(min) to VEE(max), all other pins floating. Note 4. All loading with 50Ω to VCC –2.0V. 3 ECL Pro™ SY10EP05V Micrel AC ELECTRICAL CHARACTERISTICS VCC = 0V, VEE = –5.5V to –3.0V; VCC = 3.0V to 5.5V, VEE = 0V TA = –40°C Symbol TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit fMAX Maximum Toggle Frequency(1) — 3.0 — — 3.0 — — 3.0 — GHz tPLH tPHL Propagation Delay to Output Differential D➝ Q, /Q 160 180 260 160 180 260 160 180 260 ps tJITTER Cycle-to-Cycle Jitter — — — — TBD — — — — ps VPP Input Voltage Swing (Diff.) 150 800 1200 150 800 1200 150 800 1200 mV tr tf Output Rise/Fall Times (20% to 80%) 70 — 170 80 130 180 100 — 200 ps Note 1. Parameter TA = +25°C Q fMAX guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. PRODUCT ORDERING CODE Ordering Code SY10EP05VZC SY10EP05VZCTR(1) SY10EP05VKC SY10EP05VKCTR(1) Package Type Operating Range Package Marking SY10EP05VZI(2) Z8-1 Industrial HEP05V SY10EP05VZITR(1,2) Z8-1 Industrial HEP05V HP05 SY10EP05VKI(2) K8-1 Industrial HP05 HP05 SY10EP05VKITR(1,2) K8-1 Industrial HP05 Package Type Operating Range Package Marking Z8-1 Commercial HEP05V HEP05V Z8-1 K8-1 K8-1 Note 1. Tape and Reel. Note 2. Recommended for new designs. Commercial Commercial Commercial Ordering Code 4 ECL Pro™ SY10EP05V Micrel 8 LEAD MSOP (K8-1) Rev. 01 5 ECL Pro™ SY10EP05V Micrel 8 LEAD PLASTIC SOIC (Z8-1) Rev. 03 MICREL, INC. TEL 1849 FORTUNE DRIVE SAN JOSE, CA 95131 + 1 (408) 944-0800 FAX + 1 (408) 944-0970 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2003 Micrel, Incorporated. 6