ECL Pro™ Micrel, Inc. ECLSY10EP08V Pro™ SY10EP08V 5V/3.3V DIFFERENTIAL 2-INPUT XOR/XNOR FEATURES ■ ■ ■ ■ 3.3V or 5V power supply options Maximum frequency > 3GHz typical 200ps typical propagation delay Internal input resistors: pulldown on D, pulldown and pullup on /D ■ Q output will default LOW with inputs open or at VEE ■ Transistor count: 152 ■ Available in 8-Pin MSOP and SOIC packages ECL Pro™ DESCRIPTION The SY10EP08V is a 2-input differential XOR/XNOR gate. The EP08V is ideal for applications requiring the fastest AC performance available. PIN NAMES Pin Function D0, D1, /D0, /D1 ECL Data Inputs Q, /Q ECL Data Outputs TRUTH TABLE D0 D1 /D0 /D1 Q /Q L L H H L H L H H L H L H L L H H L H H L L L H ECL Pro is a trademark of Micrel, Inc. M9999-112805 [email protected] or (408) 955-1690 Rev.: D 1 Amendment: /0 Issue Date: November 2005 ECL Pro™ SY10EP08V Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) D0 1 8 VCC /D0 2 7 Q D1 3 6 /Q /D1 4 5 VEE Available in 8-Pin SOIC and MSOP Packages Package Type Operating Range Package Marking Lead Finish SY10EP08VZC Z8-1 Commercial HEP08V Sn-Pb SY10EP08VZCTR(2) Z8-1 Commercial HEP08V Sn-Pb SY10EP08VKC K8-1 Commercial HP08 Sn-Pb SY10EP08VKCTR(2) K8-1 Commercial HP08 Sn-Pb SY10EP08VZI Z8-1 Industrial HEP08V Sn-Pb SY10EP08VZITR(2) Z8-1 Industrial HEP08V Sn-Pb SY10EP08VKI K8-1 Industrial HP08 Sn-Pb SY10EP08VKITR(2) K8-1 Industrial HP08 Sn-Pb SY10EP08VZG(3) Z8-1 Industrial HEP08V with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EP08VZGTR(2, 3) Z8-1 Industrial HEP08V with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EP08VKG(3) K8-1 Industrial HP08 with Pb-Free bar-line indicator Pb-Free NiPdAu SY10EP08VKGTR(2, 3) K8-1 Industrial HP08 with Pb-Free bar-line indicator Pb-Free NiPdAu Part Number Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-112805 [email protected] or (408) 955-1690 2 ECL Pro™ SY10EP08V Micrel, Inc. ABSOLUTE MAXIMUM RATINGS(1) Symbol Rating Value Unit 6V V –6.0 to 0 +6.0 to 0 V V 50 100 mA +260 °C VCC — VEE Power Supply Voltage VIN Input Voltage (VCC = 0V, VIN not more negative than VEE) Input Voltage (VEE = 0V, VIN not more positive than VCC) IOUT Output Current TLEAD Lead Temperature (soldering, 20sec.) TA Operating Temperature Range –40 to +85 °C Tstore Storage Temperature Range –65 to +150 °C θJA Package Thermal Resistance (Junction-to-Ambient) –Still-Air (SOIC) –500lfpm (SOIC) 160 109 °C/W –Still-Air (MSOP) –500lfpm (MSOP) 206 155 °C/W (SOIC) (MSOP) 39 39 °C/W Package Thermal Resistance (Junction-to-Case) θJC Note 1. –Continuous –Surge Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. 3.3V LVPECL DC ELECTRICAL CHARACTERISTICS(1) VCC = 3.3V ±0.3V, VEE = 0V(2) TA = –40°C Symbol IEE VOH Parameter Power Supply Current Output HIGH Voltage(3) Voltage(3) TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit 20 28 36 20 30 38 20 32 38 mA 2165 2290 2415 2230 2355 2480 2290 2415 2540 mV 1350 1490 1615 1350 1555 1680 1350 1615 1740 mV VOL Outuput LOW VIH Input HIGH Voltage (Single-Ended) 2090 — 2415 2155 — 2480 2215 — 2540 mV VIL Input LOW Voltage (Single-Ended) 1365 — 1690 1430 — 1755 1490 — 1815 mV VIHCMR Input HIGH Voltage Common Mode Range (Diff.) 2.0 — VCC 2.0 — VCC 2.0 — VCC V IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA D /D Note 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. Note 2. Input and output parameters vary 1:1 with VCC. Note 3. All loading with 50Ω to VCC –2.0V. M9999-112805 [email protected] or (408) 955-1690 3 ECL Pro™ SY10EP08V Micrel, Inc. 5.0V PECL DC ELECTRICAL CHARACTERISTICS(1) VCC = 5.0V ±0.5V, VEE = 0V(2) TA = –40°C Symbol IEE Parameter Power Supply Current VOH Output HIGH Voltage(3) Voltage(3) TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit 20 28 36 20 30 38 20 32 38 mA 3865 3990 4115 3930 4055 4180 3990 4115 4240 mV 3050 3190 3315 3050 3255 3830 3050 3315 3440 mV VOL Outuput LOW VIH Input HIGH Voltage (Single-Ended) 3790 — 4115 3855 — 4180 3915 — 4240 mV VIL Input LOW Voltage (Single-Ended) 3065 — 3390 3130 — 3455 3190 — 3515 mV VIHCMR Input HIGH Voltage Common Mode Range (Diff.) 2.0 — VCC 2.0 — VCC 2.0 — VCC mV IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA D /D Note 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. Note 2. Input and output parameters vary 1:1 with VCC. Note 3. All loading with 50Ω to VCC –2.0V. NECL DC ELECTRICAL CHARACTERISTICS(1) VCC = 0V, VEE = –5.5V to –3.0V TA = –40°C Symbol Parameter TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit 20 28 36 20 30 38 20 32 38 mA Output HIGH Voltage(2) –1135 –1010 –885 –1070 –945 –820 –1010 –885 –760 mV VOL Outuput LOW Voltage(2) –1950 –1810 –1685 –1950 –1745 –1620 –1950 –1685 –1560 mV VIH Input HIGH Voltage (Single-Ended) –1210 — –885 –1145 — –820 –1085 — –760 mV VIL Input LOW Voltage (Single-Ended) –1935 — –1610 –1870 — –1545 –1810 — –1485 mV VIHCMR Input HIGH Voltage Common Mode Range (Diff.) VCC mV IIH Input HIGH Current IIL Input LOW Current IEE Power Supply Current VOH D /D VEE +2.0 VCC VEE +2.0 VCC VEE+2.0 — — 150 — — 150 — — 150 µA 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA Note 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. Note 2. All loading with 50Ω to VCC –2.0V. M9999-112805 [email protected] or (408) 955-1690 4 ECL Pro™ SY10EP08V Micrel, Inc. AC ELECTRICAL CHARACTERISTICS VCC = 0V, VEE = –3.0V to –5.5V; VCC = 3.0V to 5.5V, VEE = 0V(1) TA = –40°C Symbol Parameter Frequency(2) TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — — >3 — — >3 — — >3 GHz fMAX Maximum Toggle tPLH tPHL Propagation Delay to Output Differential D, /D ➝ Q, /Q 100 — 240 120 200 260 150 — 300 ps VPP Input Voltage Swing (Diff.) 150 800 1200 150 800 1200 150 800 1200 mV tr tf Output Rise/Fall Times (20% to 80%) 70 120 170 70 — 170 70 — 170 ps Q, /Q Note 1. Measured using a 750mV source, 50% duty cycle clock source. All loading with 50Ω to VCC –2.0V. Note 2. fMAX guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. M9999-112805 [email protected] or (408) 955-1690 5 ECL Pro™ SY10EP08V Micrel, Inc. 8-PIN MSOP (K8-1) Rev. 01 M9999-112805 [email protected] or (408) 955-1690 6 ECL Pro™ SY10EP08V Micrel, Inc. 8-PIN PLASTIC SOIC (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2005 Micrel, Incorporated. M9999-112805 [email protected] or (408) 955-1690 7