Micrel, Inc. Precision Edge® SY10EP33V PrecisionSY100EP33V Edge® 5V/3.3V 4GHz, ÷ 4 PECL/LVPECL DIVIDER SY10EP33V SY100EP33V FEATURES ■ Guaranteed maximum frequency >4GHz ■ 3.3V and 5V power supply options ■ Guaranteed propagation delay <460ps over temperature ■ Wide operating temperature range: –40°C to +85°C ■ Available in 8-pin MSOP and SOIC packages ECL Pro™ DESCRIPTION The SY10/100EP33V is an integrated ÷4 divider. The VBB pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to VBB as a switching reference voltage. VBB may also rebias AC-coupled inputs. When used, decouple VBB to VCC via a 0.01µF capacitor and limit current sourcing or sinking to 0.5mA. When not used, VBB should be left open. The reset pin is asynchronous and is asserted on the rising edge. Upon power-up, the internal flip-flops will attain a random state; the reset allows for the synchronous use of multiple EP33s in a system. The 100K Series includes internal temperature compensation circuitry. PIN NAMES Pin Function CLK, /CLK ECL Clock Inputs with Internal 75kΩ Pull-Down Resistor, Default State is LOW RESET ECL Asynchronous Reset VBB Reference Voltage Output Q, /Q ECL Data Outputs TRUTH TABLE(1) CLK X /CLK RESET Q /Q X Z(2) L H L F F Notes: 1. F = Divide by 4 function. 2. Z = Low to High transition. ECL Pro are trademarks of Micrel, Inc. Precision Edge is a registered trademarks of Micrel, Inc. M9999-071906 [email protected] or (408) 955-1690 Rev.: E 1 Amendment: /0 Issue Date: July 2006 Precision Edge® SY10EP33V SY100EP33V Micrel, Inc. PACKAGE/ORDERING INFORMATION Ordering Information(1) RESET 1 CLK 2 8 VCC 7 Q R ÷4 /CLK 3 6 /Q VBB 4 5 VEE TOP VIEW (Available in MSOP or SOIC package) Package Type Operating Range Package Marking Lead Finish SY10EP33VZC Z8-1 Commercial HEP33V Sn-Pb SY10EP33VZCTR(2) Z8-1 Commercial HEP33V Sn-Pb Part Number SY100EP33VZC Z8-1 Commercial XEP33V Sn-Pb SY100EP33VZCTR(2) Z8-1 Commercial XEP33V Sn-Pb SY10EP33VKC K8-1 Commercial HP33 Sn-Pb SY10EP33VKCTR(2) K8-1 Commercial HP33 Sn-Pb SY100EP33VKC K8-1 Commercial XP33 Sn-Pb SY100EP33VKCTR(2) K8-1 Commercial XP33 Sn-Pb SY10EP33VZI Z8-1 Industrial HEP33V Sn-Pb SY10EP33VZITR(2) Z8-1 Industrial HEP33V Sn-Pb SY100EP33VZI Z8-1 Industrial XEP33V Sn-Pb SY100EP33VZITR(2) Z8-1 Industrial XEP33V Sn-Pb SY10EP33VKI K8-1 Industrial HP33 Sn-Pb SY10EP33VKITR(2) K8-1 Industrial HP33 Sn-Pb SY100EP33VKI K8-1 Industrial XP33 Sn-Pb SY100EP33VKITR(2) K8-1 Industrial XP33 Sn-Pb SY10EP33VZG(3) Z8-1 Industrial HEP33V with Pb-Free bar-line indicator NiPdAu Pb-Free SY10EP33VZGTR(2, 3) Z8-1 Industrial HEP33V with Pb-Free bar-line indicator NiPdAu Pb-Free SY100EP33VZG(3) Z8-1 Industrial XEP33V with Pb-Free bar-line indicator NiPdAu Pb-Free SY100EP33VZGTR(2, 3) Z8-1 Industrial XEP33V with Pb-Free bar-line indicator NiPdAu Pb-Free SY10EP33VKG(3) K8-1 Industrial HP33 with Pb-Free bar-line indicator NiPdAu Pb-Free SY10EP33VKGTR(2, 3) K8-1 Industrial HP33 with Pb-Free bar-line indicator NiPdAu Pb-Free SY100EP33VKG(3) K8-1 Industrial XP33 with Pb-Free bar-line indicator NiPdAu Pb-Free SY100EP33VKGTR(2, 3) K8-1 Industrial XP33 with Pb-Free bar-line indicator NiPdAu Pb-Free Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only. 2. Tape and Reel. 3. Pb-Free package is recommended for new designs. M9999-071906 [email protected] or (408) 955-1690 2 Precision Edge® SY10EP33V SY100EP33V Micrel, Inc. ABSOLUTE MAXIMUM RATINGS(1) Symbol Rating Value Unit VCC Power Supply Voltage (VEE = 0) +6.0 to 0 V VEE Power Supply Voltage (VCC = 0) –6.0 to 0 V VIN Input Voltage (VCC = 0V, VIN not more negative than VEE) Input Voltage (VEE = 0V, VIN not more positive than VCC) –6.0 to 0 +6.0 to 0 V V IOUT Output Current 50 100 mA TA Operating Temperature Range –40 to +85 °C TLEAD Lead Temperature +260 °C Tstore Storage Temperature Range –65 to +150 °C θJA Thermal Resistance (Junction-to-Ambient) SOIC-8 –Still Air –500lfpm 160 109 °C/W °C/W –Still Air –500lfpm 206 155 °C/W °C/W SOIC-8 39 °C/W MSOP-8 39 °C/W –Continuous –Surge MSOP-8 θJC Thermal Resistance (Junction-to-Case) Note: 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions for extended periods may affect device reliability. (10EP) LVPECL DC ELECTRICAL CHARACTERISTICS(1) VCC = +3.3V ±10%; VEE = 0V(2) TA = –40°C Symbol IEE Parameter TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — — 36 — 26 36 — — 36 mA Output HIGH Voltage(3) 2165 2290 2415 2230 2355 2480 2290 2415 2540 mV VOL Output LOW Voltage(3) 1365 1490 1615 1430 1555 1680 1490 1615 1740 mV VIH Input HIGH Voltage (Single-Ended) 2090 — 2415 2155 — 2480 2215 — 2540 mV VIL Input LOW Voltage (Single-Ended) 1365 — 1690 1430 — 1755 1490 — 1815 mV VBB Output Voltage 1790 1890 1990 1885 1955 2055 1915 2015 2115 mV Input HIGH Common Mode Range (Differential) 2.0 — VCC 2.0 — VCC 2.0 — VCC V IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA VOH VIHCMR Power Supply Current TA = +25°C Voltage(4) RESET, CLK /CLK Notes: 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 2. Input and output parameters vary 1:1 with VCC. 3. All loading with 50Ω to VCC –2.0V. 4. The VIHCMR range is referenced to the most positive side of the differential input signal. M9999-071906 [email protected] or (408) 955-1690 3 Precision Edge® SY10EP33V SY100EP33V Micrel, Inc. (10EP) PECL DC ELECTRICAL CHARACTERISTICS(1) VCC = +5.0V ±10%; VEE = 0V(2) TA = –40°C Symbol IEE Parameter TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — — 36 — 26 36 — — 36 mA Output HIGH Voltage(3) 3865 3990 4115 3930 4055 4180 3990 4115 4240 mV VOL Output LOW Voltage(3) 3065 3190 3315 3130 3255 3380 3190 3315 3440 mV VIH Input HIGH Voltage (Single-Ended) 3790 — 4115 3855 — 4180 3915 — 4240 mV VIL Input LOW Voltage (Single-Ended) 3065 — 3390 3130 — 3455 3190 — 3515 mV VBB Output Voltage 3490 3590 3690 3555 3655 3755 3615 3715 3815 mV Input HIGH Common Mode Range (Differential) 2.0 — VCC 2.0 — VCC 2.0 — VCC V IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA VOH VIHCMR Power Supply Current TA = +25°C Voltage(4) RESET, CLK /CLK Notes: 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 2. Input and output parameters vary 1:1 with VCC. 3. All loading with 50Ω to VCC –2.0V. 4. The VIHCMR range is referenced to the most positive side of the differential input signal. (10EP) ECL/LVECL DC ELECTRICAL CHARACTERISTICS(1) VCC = 0V; VEE = –3.3V to –5.0V ±10%(2) TA = –40°C Symbol IEE Parameter TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — — 36 — 26 36 — — 36 mA Output HIGH Voltage(3) –1135 –1010 –885 –1070 –945 –820 –1010 –885 –760 mV VOL Output LOW Voltage(3) –1935 –1810 –1685 –1870 –1745 –1620 –1810 –1685 –1560 mV VIH Input HIGH Voltage (Single-Ended) –1210 — –885 –1145 — –820 –1085 — –760 mV VIL Input LOW Voltage (Single-Ended) –1935 — –1610 –1870 — –1545 –1810 — –1485 mV VBB Output Voltage –1510 –1410 –1310 –1445 –1345 –1245 –1385 –1285 –1185 mV 0.0 V VOH VIHCMR Power Supply Current TA = +25°C Voltage(4) Input HIGH Common Mode Range (Differential) IIH Input HIGH Current IIL Input LOW Current RESET, CLK /CLK VEE +2.0 0.0 VEE +2.0 0.0 VEE +2.0 — — 150 — — 150 — — 150 µA 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA Notes: 1. 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 2. Input and output parameters vary 1:1 with VCC. 3. All loading with 50Ω to VCC –2.0V. 4. VIHCMR (Min) varies 1:1 with VEE. The VIHCMR range is referenced to the most positive side of the differential input signal. M9999-071906 [email protected] or (408) 955-1690 4 Precision Edge® SY10EP33V SY100EP33V Micrel, Inc. (100EP) LVPECL DC ELECTRICAL CHARACTERISTICS(1) VCC = +3.3V ±10%; VEE = 0V(2) TA = –40°C Symbol IEE Parameter TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — — 36 — 30 36 — — 40 mA Output HIGH Voltage(3) 2155 2280 2405 2155 2280 2405 2155 2280 2405 mV VOL Output LOW Voltage(3) 1355 1480 1605 1355 1480 1605 1355 1480 1605 mV VIH Input HIGH Voltage (Single-Ended) 2075 — 2420 2075 — 2420 2075 — 2420 mV VIL Input LOW Voltage (Single-Ended) 1355 — 1675 1355 — 1675 1355 — 1675 mV VBB Output Voltage 1775 1875 1975 1775 1875 1975 1775 1875 1975 mV Input HIGH Common Mode Range (Differential) 2.0 — VCC 2.0 — VCC 2.0 — VCC V IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA VOH VIHCMR Power Supply Current TA = +25°C Voltage(4) RESET, CLK /CLK Notes: 1. 100EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 2. Input and output parameters vary 1:1 with VCC. 3. All loading with 50Ω to VCC –2.0V. 4. The VIHCMR range is referenced to the most positive side of the differential input signal. (100EP) PECL DC ELECTRICAL CHARACTERISTICS(1) VCC = +5.0V ±10%; VEE = 0V(2) TA = –40°C Symbol IEE Parameter TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — — 36 — 30 36 — — 40 mA Output HIGH Voltage(3) 3855 3980 4105 3855 3980 4105 3855 3980 4105 mV VOL Output LOW Voltage(3) 3055 3180 3305 3055 3180 3305 3055 3180 3305 mV VIH Input HIGH Voltage (Single-Ended) 3775 — 4120 3775 — 4120 3775 — 4120 mV VIL Input LOW Voltage (Single-Ended) 3055 — 3375 3055 — 3375 3055 — 3375 mV VBB Output Voltage 3475 3575 3675 3475 3575 3675 3475 3575 3675 mV Input HIGH Common Mode Range (Differential) 2.0 — VCC 2.0 — VCC 2.0 — VCC V IIH Input HIGH Current — — 150 — — 150 — — 150 µA IIL Input LOW Current 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA VOH VIHCMR Power Supply Current TA = +25°C Voltage(4) RESET, CLK /CLK Notes: 1. 100EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 2. Input and output parameters vary 1:1 with VCC. 3. All loading with 50Ω to VCC –2.0V. 4. The VIHCMR range is referenced to the most positive side of the differential input signal. M9999-071906 [email protected] or (408) 955-1690 5 Precision Edge® SY10EP33V SY100EP33V Micrel, Inc. (100EP) ECL/LVECL DC ELECTRICAL CHARACTERISTICS(1) VCC = 0V; VEE = –3.3V to –5.0V ±10%(2) TA = –40°C Symbol IEE Parameter TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit — — 36 — 30 36 — — 40 mA Output HIGH Voltage(3) –1145 –1020 –895 –1145 –1020 –895 –1145 –1020 –895 mV VOL Output LOW Voltage(3) –1945 –1820 –1695 –1945 –1820 –1695 –1945 –1820 –1695 mV VIH Input HIGH Voltage (Single-Ended) –1225 — –880 –1225 — –880 –1225 — –880 mV VIL Input LOW Voltage (Single-Ended) –1945 — –1625 –1945 — –1625 –1945 — –1625 mV VBB Output Voltage –1525 –1425 –1325 –1525 –1425 –1325 –1525 –1425 –1325 mV 0.0 V VOH VIHCMR Power Supply Current TA = +25°C Voltage(4) Input HIGH Common Mode Range (Differential) IIH Input HIGH Current IIL Input LOW Current RESET, CLK /CLK VEE +2.0 0.0 VEE +2.0 0.0 VEE +2.0 — — 150 — — 150 — — 150 µA 0.5 –150 — — — — 0.5 –150 — — — — 0.5 –150 — — — — µA Notes: 1. 100EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and traverse airflow greater than 500lfpm is maintained. 2. Input and output parameters vary 1:1 with VCC. 3. All loading with 50Ω to VCC –2.0V. 4. VIHCMR (Min) varies 1:1 with VEE. The VIHCMR range is referenced to the most positive side of the differential input signal. TIMING DIAGRAM CLK t RR RESET Q M9999-071906 [email protected] or (408) 955-1690 6 Precision Edge® SY10EP33V SY100EP33V Micrel, Inc. AC ELECTRICAL CHARACTERISTICS(1, 2) NECL: VCC = 0V, VEE = –3.3V to –5.0V ±10%; PECL: VEE = 0V, VCC = +3.3V to +5.0V ±10%. TA = –40°C Symbol Parameter Frequency(3) TA = +25°C TA = +85°C Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit 4 — — 4 — — 4 — — GHz fMAX Maximum tPLH tPHL Propagation Delay to Output CLK ➝ Q (SY10EP33V) RESET➝ Q (SY100EP33V) RESET➝ Q 300 300 310 380 420 420 440 470 470 300 290 310 380 420 420 440 470 470 320 320 320 400 450 450 460 500 500 tRR Set/Reset Recovery 200 — — 200 100 — 200 — — tPW Minimum Pulse Width RESET 550 — — 550 200 — 550 — — ps tJITTER Cycle-to-Cycle RMS Jitter(3) — 0.2 <1 — 0.2 <1 — 0.2 <1 ps(rms) VPP Input Voltage Swing (Differential) 150 800 1200 150 800 1200 150 800 1200 mV tr tf Output Rise/Fall Times (20% to 80%) 90 170 200 100 180 220 120 200 240 ps Q, /Q ps Notes: 1. Measured using a 750mV source, 50% duty cycle clock source. All loading with 50Ω to VCC –2.0V. 2. Specifications for packaged product only. 3. fMAX guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. M9999-071906 [email protected] or (408) 955-1690 7 ps Precision Edge® SY10EP33V SY100EP33V Micrel, Inc. 8 LEAD MSOP (K8-1) Rev. 01 M9999-071906 [email protected] or (408) 955-1690 8 Precision Edge® SY10EP33V SY100EP33V Micrel, Inc. 8 LEAD SOIC .150" WIDE (Z8-1) Rev. 03 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB USA http://www.micrel.com The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. © 2003 Micrel, Incorporated. M9999-071906 [email protected] or (408) 955-1690 9