C&K T Series Subminiature Rocker Switches Features/Benefits • Compact size—small footprint • Single and double pole models • PC and panel mounting options available • RoHS compliant Typical Applications • Telecommunications • Instrumentation • Medical Equipment Models Available Specifications Materials CONTACT RATING: Q contact material (TX01 models): 3 AMPS @ 120 V AC or 28 V DC. All other models: 2 AMPS @ 120 V AC or 28 V DC. See page H-53 for additional ratings. CASE: Glass filled nylon 6/6, flame retardant, heat stabilized or diallyl phthalate (DAP), (UL 94V-0). ELECTRICAL LIFE: TX01 models: 60,000 make-and-break cycles at full load. All other models: 30,000 cycles. BUSHING: Brass, nickel plated. CONTACT RESISTANCE: Below 20 m Ω typ. initial @ 2–4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1000 Vrms min. @ sea level. OPERATING TEMPERATURE: –30ºC to 85ºC. ACTUATOR: Nylon, black standard. HOUSING: Stainless steel. SWITCH SUPPORT: Brass, matte-tin plated. MOUNTING BRACKET: Stainless steel. END CONTACTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page H-53 for additional contact materials. SOLDERABILITY: Per MIL-STD-202F method 208D, or EIA RS-186E method 9 (1 hour steam aging). CENTER CONTACTS & TERMINALS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page H-53 for additional contact materials. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. TERMINAL SEAL: Epoxy. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. HARDWARE: Nut, Screws & Lockwasher: Stainless steel. Standoff: Nylon standard. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages H-47 through H-52. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all “bottom-wash” PCB cleaning methods. Rocker Switch Function T101 SP On-None-On T102 SP Off-None-On T103 SP On-Off-On T105 SP Mom.-Off-Mom. T107 SP On-Off-Mom. T201 DP On-None-On T205 DP Mom.-Off-Mom. Actuator J1 Rocker, .300" wide J6 Rocker, .230" wide Terminations A Right angle, PC thru-hole AV Vertical Right angle, PC thru-hole Z Solder lug Contact Material V3 V-bracket B Gold K Gold, tin-lead P Gold, matte-tin Q Silver G Gold over silver Seal E Epoxy Actuator Color 2 Black Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H–47 www.ittcannon.com C&K T Series Subminiature Rocker Switches ACTUATOR COLOR SWITCH FUNCTION SWITCH FUNCTION POS. 1 NO. POLES MODEL NO. POS. 2 CONNECTED TERMINALS POS. 3 POS. 1 C&K marking on opposite side T101 ON NONE ON T103 ON OFF ON T105 MOM. OFF MOM. T107 ON OFF MOM. POS. 2 C&K marking on opposite side T102 OFF NONE ON SCHEMATIC N/A 2-3 SP POS. 3 2-1 OPEN SPDT OPEN N/A 3-1 SPST SPDT PANEL MOUNTING Terminal Nos. For Reference Only Part number shown: T101J1ZBE2 T201 ON NONE ON T205 MOM. OFF MOM. DP N/A 2-3,5-6 2-1,5-4 OPEN DPDT DPDT PANEL MOUNTING Part number shown: T201J1ZBE2 Terminal Nos. For Reference Only MOM. = Momentary All models with all options when ordered with G or Q contact material. Rocker Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–48 www.ittcannon.com H C&K T Series Subminiature Rocker Switches ACTUATOR ACTUATOR J1 ROCKER, .300 WIDE OPTION CODE 2 BLACK Actuators available separately, see page H 51H53. Finish: Matte. Other colors, custom actuator markings and legends available, consult Customer Service Center. Standard with all models except T10X with A terminations. J6 ACTUATOR COLOR ROCKER, .230 WIDE Standard with T10X model with A terminations. TERMINATIONS Z SOLDER LUG SP SP and DP A DP Not available with K or P contact material. RIGHT ANGLE, PC THRU-HOLE Rocker PC MOUNTING T101J6ABE2 Horizontal Actuation SPDT Not available with T102 model. J6 actuator standard only on T10X models with A terminations. Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H–49 www.ittcannon.com C&K T Series Subminiature Rocker Switches TERMINATIONS A RIGHT ANGLE, PC THRU-HOLE T201J1ABE2 Horizontal Actuation DPDT AV VERTICAL RIGHT ANGLE, PC THRU-HOLE T101J1AVBE2 Vertical Actuation SPDT AV NOTE: Terminal bend radii and lead-in manufacturing option. VERTICAL RIGHT ANGLE, PC THRU-HOLE T201J1AVBE2 Vertical Actuation DPDT V3 NOTE: Terminal bend radii and lead-in manufacturing option. VERTICAL MOUNT, V-BRACKET Rocker T101J1V3BE2 SPDT Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–50 www.ittcannon.com H C&K T Series Subminiature Rocker Switches TERMINATIONS V3 VERTICAL MOUNT, V-BRACKET T201J1V3BE2 DPDT CONTACT MATERIAL OPTION CODE B RoHS RoHS COMPLIANT * COMPATIBLE * YES CONTACT MATERIAL TERMINAL PLATING RATINGS GOLD 1 YES GOLD 3 LOW LEVEL/ TIN-LEAD 6 K NO YES P YES YES Q YES YES SILVER 4,5 SILVER 5 POWER G YES YES GOLD OVER SILVER 2,3 GOLD 3 LOW LEVEL/DRY 0.4 VA MAX. @ 20 V AC OR DC MAX. DRY CIRCUIT MATTE-TIN 7 CIRCUIT OR POWER TX01 MODELS: 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 2 AMPS @ 120 V AC OR 28 V DC. TX01 MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 3 AMPS @ 120 V AC OR 28 V DC. ALL OTHER MODELS: 0.4 VA MAX @ 20 V AC OR DC MAX. OR 2 AMPS @ 120 V AC OR 28 V DC. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTACTS & TERMINALS: Copper alloy, with gold plate over nickel plate. 2 END CONTACTS: Coin silver, with gold plate over nickel plate. 3 CENTER CONTACTS & ALL TERMINALS: Copper alloy, with gold plate over nickel plate. 4 END CONTACTS: Coin silver, silver plated. 5 CENTER CONTACT & ALL TERMINALS: Copper alloy, silver plated. 6 TERMINALS: Copper alloy, with tin-lead alloy over nickel plate. NOTE: Any models supplied with Q, B, G & P contact material are RoHS compliant. For the latest information regarding RoHS compliance, please go to: www.ittcannon.com/rohs. All models with all options when ordered with G, or Q contact material. B contact material standard with A, AV, V3 terminations. Q contact material standard with C & Z terminations. K & P contact materials not available with Z terminations. 7 TERMINALS: Copper alloy, with matte-tin over nickel plate. SEAL EPOXY SEAL Rocker E Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H H–51 www.ittcannon.com C&K T Series Subminiature Rocker Switches AVAILABLE HARDWARE Panel mounting hardware for rocker and lever handle switches is available separately. Mounting hardware consists of two screws, two nuts, two standoffs and two lockwashers per switch, and is available for panel thicknesses of 1/16, 3/32 and 1/8 inch. See part numbers below. TYPICAL ASSEMBLY SCREW PANEL THICKNESS STAND-OFF LENGTH STAND-OFF LOCKWASHER NUT PART NO. PANEL THK. STANDOFF LENGTH 761101000 1/16 IN. (1,59) .295 (7,49) 761102000 3/32 IN. (2,38) .264 (6,71) 761103000 1/8 IN. (3,18) .233 (5,92) NOTE: Additional nuts, screws and lockwashers available separately, see Technical Data section of this catalog. J1 Actuator J6 Actuator PART NO. PART NO. 468002263 BLACK 468102263 BLACK Material: Nylon Finish: Matte Material: Nylon Finish: Matte NOTE: Other colors, custom actuator markings and legends available, consult Customer Service Center. Rocker Dimensions are shown: Inch (mm) Specifications and dimensions subject to change H–52 www.ittcannon.com H