KEMET T491D474M035AG

Surface Mount Capacitors
• Solid & Organic Tantalum
• Multilayer Ceramic
• Solid Aluminum
www.kemet.com
F-3102M 03/07
INDEX
SOLID TANTALUM CHIP CAPACITORS
PAGE
GENERAL PERFORMANCE CHARACTERISTICS..................................................................................................3-14
T491 SERIES — INDUSTRIAL GRADE .................................................................................................................15-19
T492 SERIES — CWR11 STYLE PER MIL-PRF-55365/8.....................................................................................20-21
T493 SERIES — MILITARY COTS ........................................................................................................................22-26
T494 SERIES — LOW ESR, INDUSTRIAL GRADE ...............................................................................................27-30
T495 SERIES — LOW ESR, SURGE ROBUST .....................................................................................................31-35
T496 SERIES — FAIL-SAFE WITH BUILT-IN FUSE .............................................................................................36-38
T498 SERIES — HIGH TEMPERATURE ...............................................................................................................39-40
T510 SERIES — HIGH CAPACITANCE-LOW ESR...............................................................................................41-42
CONDUCTIVE POLYMER CHIP CAPACITORS
PAGE
GENERAL PERFORMANCE CHARACTERISTICS................................................................................................43-49
T520 SERIES — KO-CAP POLYMER ...................................................................................................................50-53
T525 SERIES — KO-CAP POLYMER - HIGH TEMPERATURE............................................................................54-55
T530 SERIES — KO-CAP POLYMER - HIGH CAPACITANCE/ULTRA LOW ESR...............................................56-57
ALUMINUM ORGANIC CAPACITORS
PAGE
GENERAL PERFORMANCE CHARACTERISTICS................................................................................................58-63
A700 SERIES .........................................................................................................................................................64-66
CERAMIC CHIP CAPACITORS
PAGE
GENERAL PERFORMANCE CHARACTERISTICS................................................................................................67-71
CERAMIC CHIP-STANDARD ................................................................................................................................72-76
CERAMIC CHIP-TIN-LEAD L TERMINATION.............................................................................................................77
THICKNESS CODE REEL QUANTITY REFERENCE CHART.....................................................................................78
CERAMIC OPEN-MODE........................................................................................................................................79-80
CERAMIC HIGH VOLTAGE ...................................................................................................................................81-84
CERAMIC CAPACITOR ARRAY ............................................................................................................................85-86
MIL-PRF-55681 ESTABLISHED RELIABILITY ......................................................................................................87-91
MIL-PRF-55681 TAPE AND REEL QUANTITIES ........................................................................................................91
LAND DIMENSIONS ...................................................................................................................................................93
Mil-PRF-123 and GR900 high-reliability ceramic chips are also available. Refer to KEMET Catalog F-3054 for
detailed information.
TANTALUM & CERAMIC CHIP PACKAGING
PAGE
TANTALUM AND ALUMINUM CHIP PACKAGING INFORMATION ...............................................................92, 94-95
CERAMIC CHIP PACKAGING INFORMATION .....................................................................................................93-97
EMBOSSED CARRIER TAPE REELING INFORMATION............................................................................................95
PUNCHED CARRIER TAPE (PAPER TAPE) REELING INFORMATION .....................................................................96
BULK CASSETTE PACKAGING .................................................................................................................................97
CERAMIC CHIP MARKING.........................................................................................................................................97
Notice
Although the information in this catalog has been carefully checked for accuracy, and is believed to be correct and current,
no warranty, either express or implied, is made as to either its applicability to, or its compatibility with, specific requirements;
nor does KEMET Electronics Corporation assume any responsibility for correctness of this information, nor for damages consequent to its use. All design characteristics, specifications, tolerances, and the like are subject to change without notice.
The KEMET website (www.kemet.com) should be consulted for the very latest information on design characteristics, specifications, applications, and newly-released products, since previously-issued printed information may not be current.
Any capacitors misapplied may fail and thereby damage other circuit components. Please refer to application notes and recommendations in this catalog for a complete description of capacitor characteristics.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
20°
TANTALUM CHIP CAPACITORS
PRODUCT DESCRIPTION
KEMET’s family of solid tantalum chip capacitors is
designed and manufactured with the demanding
requirements of surface mount technology in mind.
These devices extend the advantages of solid tantalum technology to today’s surface mount circuit
applications. Complementing multilayer ceramic chip
convenience with capacitance ratings through 1500
µF, tantalum chip capacitors permit circuit designers
to take full advantage of the benefits of surface mount
technology.
T491 Series — Industrial
The leading choice in today’s surface mount
designs is the KEMET T491 Series. This product
meets or exceeds the requirements of EIA standard
535BAAC. The physical outline and dimensions of
this series conform to this global standard.
Five low profile case sizes are available in the T491
family. The R/2012-12, S/3216-12 and T/3528-12
case sizes have a maximum height of 1.2 mm. The
U/6032-15 size has a maximum height of 1.5 mm,
and the V/7343-20 has a maximum height of 2.0 mm.
This product was designed specifically for today’s
highly automated surface mount processes and equipment. This series uses the same proven solid tantalum KEMET technology acclaimed and respected
throughout the world. Added to this is the latest in
materials, processes and automation which result in a
component unsurpassed worldwide in total performance and value.
The standard terminations are 100% matte tin and
provide excellent wetting characteristics and compatibility with today’s surface mount solder systems. Tin-Lead
(SnPb) terminations are available upon request for any
part number. Gold-plated terminations are also available
for use with conductive epoxy attachment processes.
The symmetrical terminations offer total compliancy to
provide the thermal and mechanical stress relief
required in today’s technology. Lead frame attachments
to the tantalum pellet are made via a microprocessorcontrolled welding operation, and a high temperature
silver epoxy adhesive system.
Standard packaging of these devices is tape and
reel in accordance with EIA 481-1. This system provides perfect compatibility with all tape-fed
placement units.
T492 Series — Military
KEMET is approved to MIL-PRF-55365/8
(CWR11), Weibull failure rate “B” level or 0.1% failures per 1,000 hours, “C” level or 0.01% failures per
1,000 hours, and “D” level or 0.001% failures per
1,000 hours. This CWR11 product — designated as
KEMET’s T492 Series — is a precision-molded
device, with compliant leadframe terminations and
indelible laser marking. This is the military version of
the global IEC/EIA standard represented by
KEMET’s T491 Series. Tape and reeling per EIA
481-1 is standard.
T493 Series — Military - COTS
The T493 series is designed for the COTS
(Commercial-Off-The-Shelf) requirements of
military/aerospace applications. This series is a surface mount tantalum product offering various leadframe surface finishes, Weibull grading and surge current testing options. The full part number includes a
code defining the terminations, the Weibull reliability,
surge test conditions, and the ESR range. The possible terminations include gold plated, hot solder
dipped, solder plated, and solder fused. Reliability
grading of B level (0.1%/kHours) and C level
(0.01%/kHours) are available. Surge current testing
options include: 10 cycles at 25ºC, or 10-cycles at
-55ºC and +85ºC. Both standard and low ESR options
are available. All lots of this series are conditioned with
MIL-PRF-55365 Group A testing.
T494 Series — Low ESR, Industrial Grade
The T494 is a low ESR series that is available in all
the same case sizes and CV ratings as the popular
T491 series. The T494 offers low ESR performance
with the economy of an industrial grade device. This
series is targeted for output filtering and other applications that may benefit from improved efficiency due to
low ESR.
T495 Series — Low ESR, Surge Robust
The low ESR, surge robust T495 series is an important member of KEMET’s tantalum chip family.
Designed primarily for output filtering in switch-mode
power supplies and DC-to-DC converters, the standard
CV T495 values are also an excellent choice for batteryto-ground input filter applications.
This series builds upon proven technology used for
industrial grade tantalum chip capacitors to offer several important advantages: very low ESR, high ripple
current capability, excellent capacitance stability, plus
improved ability to withstand high inrush currents.
These benefits are achieved through a combination of
proprietary design, material, and process parameters,
as well as high-stress, low impedance electrical conditioning performed prior to screening. Capacitance
values range from 4.7µF to 1000µF, in voltage ratings
from 2.5 to 50 volts.
T496 Series — Fused
KEMET also offers a “fail-safe” fused solid tantalum
chip capacitor. The built-in fuse element provides
excellent protection from damaging short circuit conditions in applications where high fault currents exist.
Protection from costly circuit damage due to reversed
installation is offered with this device. Package sizes
include the EIA standard 3528-12, 6032-15, 7343-31,
and 7343-43 case size. Capacitance values range from
0.15 µF to 470.0 µF, in voltage ratings from 4 to 50.
Standard capacitance tolerances include ±20% and
±10%. Tape and reeling per EIA 481-1 is standard.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
3
TANTALUM CHIP CAPACITORS
PRODUCT DESCRIPTION
T498 SERIES - High Temperature (150° C)
The T498 Series is a high temperature version of
KEMET's solid tantalum chip family that offers optimal
performance in applications with operating temperatures of up to 150° C. Advancements in materials and
testing have allowed for the introduction of this series
which delivers a reliability level of 0.5% per 1000 hours
at rated voltage at rated temperature. This series is
available in five standard EIA case sizes with RoHSCompliant/100% matte tin finish lead terminations as
standard. Other termination options include
90Sn/10Pb finishes and gold for conductive adhesive
attachment processes. Capacitance values range
from .47µF to 220µF, in voltage ratings from 4 to 50
volts.
T510 Series — High Capacitance – Low ESR
The ultra-low ESR T510 Series is a breakthrough in
solid tantalum capacitor technology. KEMET’s T510
Series offers low ESR in the popular EIA 7343-43 and
7360-38 case sizes. The ultra-low ESR and high ripple
current capability make the T510 an ideal choice for
SMPS filtering and power decoupling of today’s high
speed microprocessors.
KEMET has developed an innovative construction
platform that incorporates multiple capacitor elements,
in parallel, inside a single package. This unique
assembly, combined with KEMET’s superior processing technology, provides the best combination of high
CV, low ESR, and small size in a user friendly, molded,
surface mount package.
T520 SERIES — Conductive Polymer
The Kemet Organic Capacitor (KO-CAP) is a
Tantalum capacitor, with a Ta anode and Ta 2O 5
dielectric. However, a conductive, organic, polymer
replaces the MnO2 as the cathode plate of the
capacitor. This results in very low ESR and improved
cap retention at high frequency. The KO-CAP also
exhibits a benign failure mode, which eliminates the
ignition failures that can occur in standard MnO2
Tantalum types. Note also that KO-CAPs may be
operated at voltages up to 90% of rated voltage for
4
part types with rated voltage ≤ 10 volts and up to
80% of rated voltage for part types > 10 volts with
equivalent or better reliability than standard tantalums
operated at 50% of rated voltage.
The T520 series captures the best features of multilayer ceramic caps (low ESR and high frequency
cap retention), aluminum electrolytics (benign failure
mode), and proven solid tantalum technology (volumetric efficiency, surface mount capability, and no
wearout mechanism). The KO-CAP can reduce
component counts, eliminate through-hole assembly by replacing cumbersome leaded aluminum
capacitors, and offer a more cost effective solution
to high-cost high-cap ceramic capacitors. These
benefits allow the designer to save both board
space and money. See pages 42-52 for complete
details.
T525 SERIES — High Temperature Conductive Polymer
The T525 Series is a version of KEMET’s Tantalum
Polymer Capacitor rated up to 125ºC. This part type
was introduced as Lead (Pb) Free and offers the
same advantages as the T520 KO-CAP. This includes
low ESR, high frequency capacitance retention and
benign failure mode.
T530 SERIES — Conductive Polymer High
Capacitance — Ultra Low ESR
KEMET is offering a multiple anode tantalum chip
capacitor with a polymer material replacing the MnO2
offering non-ignition, self-healing, 125C performance
capability with higher conductivity material that lowers the ESR. Packaged as multiple anodes to reduce
the depth that the signal must penetrate, this parallel
arrangement reduces the ESR further still to achieve
the highest capacitance and lowest ESR of any other
type of SMT capacitor with typical ESR values as low
as 5 milliohms. With the reduced ESR, the enhanced
capacitance retention in higher frequencies results in
the lowest total capacitance solution and provides for
the most economical solution in high power applications.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
TANTALUM MnO2 COMPONENT PERFORMANCE CHARACTERISTICS
of equilibrium with the environment, is approximately -5% to +12% over the range from 25% to
95% RH, referred to the standard 50% RH. The
amount of change is dependent upon size (capacitance and voltage rating, ie: CV product); small
sizes might change no more than ±5%.
Equilibrium at such extremes is seldom attained by
plastic-cased capacitors, and the change in
capacitance is consequently less. The rate of
response to humidity changes increases with
increasing temperature. Dissipation factor and
ESR also increase with increasing RH.
DC leakage current may rise upon exposure to a
combination of high temperature and high humidity, but is normally restored by voltage conditioning
under standard conditions. The increase will be
greater than that experienced under temperature
influence alone because of conduction through
absorbed water.
Tantalum chips may be affected by absorption of
water on external insulating surfaces.The water
film may also attract a layer of dust from the air,
increasing the effect. The most sensitive parameter is leakage current.
Introduction
KEMET solid tantalum capacitors are identified by
the initial “T,” followed by a unique “Series” number; for example, T491, T492, etc. Each Series
denotes a general physical form and type of
encapsulation, as well as limits on dimensions and
certain electrical characteristics under standard
conditions of 25°C, 50% relative humidity, and one
atmosphere pressure. Specific requirements are
set forth in the respective Product Series in this
catalog. All series are 100% screened for leakage,
capacitance, dissipation factor, and ESR. All
Series are inspected to electrical limits using a
minimum .1% AQL sampling plan, according to
the Military Standard MIL-STD-105, even after
100% testing. This sampling plan, to the best of
KEMET Electronics’ knowledge, meets or exceeds
the generally accepted industry standard for similar products. KEMET capacitors may also be supplied, with prior agreement, to meet specifications
with requirements differing from those of KEMET catalogs.
ELECTRICAL
2. Operating Temperature Range
• –55 °C to +125 °C
Voltage derating is specified in Section 5.
Performance characteristics over this temperature
range are presented within the following sections.
3. Non-Operating Temperature Range
• –55 °C to +125 °C
Tantalum capacitors do not lose capacitance from
the “de-forming” effect as do liquid-electrolytic
capacitors. Storage at high temperature may
cause a small, temporary increase in leakage current (measured under standard conditions), but the
original value is usually restored within a few minutes after application of rated voltage.
Tantalum chips are not hermetically sealed, therefore they do exhibit reversible changes in parameters with respect to relative humidity (RH).
Capacitance increases with increasing humidity.
The limiting change, reached upon establishment
4. Capacitance
• 0.1 µF to 1000 µF
Refer to part number tables for available capacitance ratings and tolerances by series.
Capacitance is measured at 120 Hz, up to 1.0
volt rms maximum and up to 2.5 volts DC maximum, at
+25°C.DC bias causes only a small reduction in capacitance, up to about 2% when full rated voltage is applied.
DC bias is not commonly used at room temperature, but
is more commonly used at elevated temperatures.
Capacitance decreases with increasing frequency.
FIGURE 1
Typical Effect of Frequency upon Capacitance
Capacitance increases with increasing temperature.
Percent Change in +25⬚C
Capacitance Value
1. General Application Class
Solid tantalum capacitors are usually applied in
circuits where the AC component is small compared to the DC component. Typical uses known
to KEMET Electronics include blocking, by-passing, decoupling, and filtering. They are also used in
timing circuits. General purpose devices are recommended to have an external series resistance of
0.1Ω/volt to reduce the failure due to surge current. Newer devices designed for power applications (T495, T5XX), are built to eliminate this series
resistance requirement. Because tantalum capacitors can experience scintillation (self-healing) in
their life, the circuit impedence should not exceed
100KΩ or this will circumvent the scintillation and
degrade leakage.
+20%
+10%
0
-10%
-20%
-80
-60
-40
-20
0
+20 +40
+60 +80 +100 +120
Operating Temperature—⬚C
FIGURE 2
Typical Effect of Temperature upon Capacitance
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
5
Solid Tantalum Surface Mount
SOLID TANTALUM CHIP CAPACITORS
SOLID TANTALUM CHIP CAPACITORS
TANTALUM MnO2 COMPONENT PERFORMANCE CHARACTERISTICS (con’t.)
TABLE 1 Maximum Capacitance Change
with Temperature (ref: 25°C)
Ambient Temperature
+85°C
+125°C
+10%
*+12% or +15%to20%
–55°C
–10%
*+12% is standard. +15% and 20% apply to certain
extended CV values as noted in part number tables.
5. Working DC Voltage (WVDC)
• 3 to 50 volts
Refer to part number tables for available voltage
ratings by series.
These voltages are the maximum recommended peak
DC operating voltages from –55°C to +85°C for
continuous duty. These voltages are derated linearly above
+85°C to 2/3 rated voltage for operation at
+125°C (See Figure 3). For added reliability it is
recommended to operate at a 50% derating of the working
voltage for tantalum capacitors with MnO2 as a cathode.
See page 39 for working DC Voltage of high temperature
T498 product.
Percent Change in
Working DC Voltage
100%
80%
60%
40%
20%
-60
-40
-20
0
+20 +40 +60 +80 +100 +120 +140
Operating Temperature—⬚C
FIGURE 3
Working DC Voltage Change with Temperature
6. Surge Voltage
TABLE 2 Surge Voltage Ratings
at +25°C, +85°C & +125°C
Rated
Working
Volts
@ +25°C
& +85°C
3
4
6
10
16
20
25
35
50
6
Surge
Voltage
@ +25°C
& +85°C
4
5.2
8
13
20
26
33
46
65
Derated
DC
Volts
@ +125°C
2
2.7
4
7
10
13
17
23
33
Surge
Voltage
@ +125°C
2.4
3.2
5
8
12
16
20
28
40
Surge voltage tests are performed at +25°C,
+85°C and +125°C with the applicable surge voltage. The surge voltage is applied for 1000 cycles
of 30 seconds at voltage through a 33 ohm series
resistor and 30 seconds off voltage with the
capacitor discharged through a 33 ohm resistor.
Upon completing the test, the capacitors are
allowed to stabilize at room temperature. Capacitance, DCL and DF are then tested:
a.
Capacitance — within ± 5% of initial value
b.
DC Leakage — within initial limit
c.
Dissipation Factor — within initial limit
d.
ESR — within initial limit
7. Reverse Voltage and Polarity
TABLE 3 Reverse Voltage Ratings
Temperature
+25°C
+85°C
+125°C
Permissible Reverse Voltage
15% of Rated Voltage
5% of Rated Voltage
1% of Rated Voltage
Solid tantalum capacitors are polarized devices
and may be permanently damaged or destroyed if
connected with the wrong polarity. The positive
terminal is identified on the capacitor body by a
stripe and a beveled edge. A small degree of transient reverse voltage is permissible for short periods per Table 3. The capacitors should not be
operated continuously in reverse mode, even within these limits.
8. DC Leakage Current (DCL)
Refer to part number tables for maximum leakage
current limits.
DC leakage current is the current that, after a oneto five-minute charging period, flows through a
capacitor when voltage is applied. Leakage is
measured at +25°C with full rated DC voltage
applied to the capacitor through a 1000 ohm resistor in series with the capacitor.
DC leakage current increases with increasing temperature.
TABLE 4 Leakage Limit Multipliers at Specified
Temperatures (ref: 25°C limits)
Ambient Temperature
–55°C
N/A
+85°C
10X
+125°C
12X
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
TANTALUM MnO2 COMPONENT PERFORMANCE CHARACTERISTICS (con’t.)
Multiplier of 120 Hz D.F.
20.0
Multiplier of DC Leakage Current
10.0
Reference 1.0
at + 25°C
10.0
5.0
Reference
1.0 at 120 Hz
1.0
1.0
100
1k
10k
Frequency — Hertz
FIGURE 6 Typical Effect of Frequency upon Dissipation
Factor
0.1
-60 -40 -20
0
+20 +40 +60 +80 +100 +125
Operating Temperature—⬚C
FIGURE 4
Typical Effect of Temperature upon
DC Leakage Current
DC leakage current decreases with decreasing
applied voltage.
Multiplier of DC Leakage Current
1.0
0.1
0.01
0.001
0
10
20
30
40
50
60
70
80
90
100
110
Percentage of Rated Voltage
FIGURE 5
Typical Effect of Applied Voltage on DC
Leakage Current.
9. Dissipation Factor (DF)
Refer to part number tables for maximum DF
limits.
Dissipation factor is measured at 120 Hz, up to
1.0 volt rms maximum, and up to 2.0 volts DC
maximum at +25°C. The application of DC bias
causes a small reduction in DF, about 0.2% when
full rated voltage is applied. DF increases with
increasing frequency.
Dissipation factor is a very useful low frequency
(120 Hz) measurement of the resistive component
of a capacitor. It is the ratio of the equivalent series
resistance (ESR) to the capacitive reactance, (XC)
and is usually expressed as a percentage. It is
directly proportional to both capacitance and frequency. Dissipation factor loses its importance at
higher frequencies, (above about 1 kHz), where
impedance (Z) and equivalent series resistance
(ESR) are the normal parameters of concern.
DF = R = 2fCR DF = Dissipation Factor
XC
R = Equivalent Series
Resistance (Ohms)
X C = Capacitive Reactance
(Ohms)
f = Frequency (Hertz)
C = Series Capacitance
(Farads)
DF is also referred to as tan or “loss tangent.”
The “Quality Factor,” “Q,” is the reciprocal of DF.
DF decreases with temperature above +25°C and
may also increase at lower temperatures.
Unfortunately, one general limit for DF cannot be
specified for all capacitance/voltage combinations,
nor can response to temperature be simply stated.
DC bias is not commonly used at room temperature, but is more commonly used at elevated temperatures.
10. Equivalent Series Resistance (ESR) and
Impedance (Z)
Equivalent Series Resistance (ESR) is the preferred high-frequency statement of the resistance
unavoidably appearing in these capacitors. ESR
is not a pure resistance, and it decreases with
increasing frequency.
Total impedance of the capacitor is the vector
sum of capacitive reactance (XC) and ESR, below
resonance; above resonance total impedance is
the vector sum of inductive reactance (XL) and
ESR.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
7
Solid Tantalum Surface Mount
SOLID TANTALUM CHIP CAPACITORS
SOLID TANTALUM CHIP CAPACITORS
TANTALUM MnO2 COMPONENT PERFORMANCE CHARACTERISTICS (con’t.)
XC = 1 ohm
2fC
where:
f = frequency, Hertz
C = capacitance, Farad
FIGURE 7a
Total Impedance of the Capacitor Below
Resonance
XL = 2fL
where:
f = frequency, Hertz
L = inductance, Henries
FIGURE 7b Total Impedance of the Capacitor Above
Resonance
To understand the many elements of a capacitor, see Figure 8.
ESL
ESR
ESR — Represents the actual ohmic series resistance in series with the capacitance. Lead wires
and capacitor electrodes are contributing sources.
RL — Capacitor Leakage Resistance. Typically it
can reach 50,000 megohms in a tantalum capacitor. It can exceed 1012 ohms in monolithic ceramics and in film capacitors.
Rd — The dielectric loss contributed by dielectric
absorption and molecular polarization. It becomes
very significant in high frequency measurements
and applications. Its value varies with frequency.
Cd — The inherent dielectric absorption of the
solid tantalum capacitor which typically equates to
1-2% of the applied voltage.
As frequency increases, XC continues to decrease
according to its equation above. There is unavoidable inductance as well as resistance in all capacitors, and at some point in frequency, the reactance ceases to be capacitive and becomes
inductive. This frequency is called the self-resonant point. In solid tantalum capacitors, the resonance is damped by the ESR, and a smooth,
rather than abrupt, transition from capacitive to
inductive reactance follows.
Typical ESR/Z frequency response curves are
shown in Figures 9a and 9b. These curves are
for selected ratings and represent typical T491
Series performance. Maximum limits for 100 kHz
ESR are listed in the part number tables for
each series. Note that the T494 Series offers low
ESR and the T495 Series is specially designed
for very low ESR performance. Refer to page 31
for more information. See also KEMET’s T510
Series low ESR ratings on page 40.
C
RL
Cd
FIGURE 8
8
Rd
The Real Capacitor
A capacitor is a complex impedance consisting of
many series and parallel elements, each adding
to the complexity of the measurement system.
ESL — Represents lead wire and construction
inductance. In most instances (especially in solid
FIGURE 9a ESR & Impedance (Z) vs Frequency
tantalum and monolithic ceramic capacitors) it is
insignificant at the basic measurement frequencies of 120 and 1000 Hz.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
TANTALUM MnO2 COMPONENT PERFORMANCE CHARACTERISTICS (con’t.)
FIGURE 9b ESR & Impedance (z) vs Frequency
ESR and Z are also affected by temperature. At
100 kHz, ESR decreases with increasing temperature. The amount of change is influenced by the
size of the capacitor and is generally more pronounced on smaller ratings.
10
Multiplier of 100KHz ESR
2
1
0.1
-50
-25
0
25
50
75
100
125
Temperature - Degrees Centigrade
FIGURE 10
Typical Effect of Temperature on 100 kHz ESR
11. AC Power Dissipation
Power dissipation is a function of capacitor size
and materials. Maximum power ratings have been
established for all case sizes to prevent overheating. In actual use, the capacitor’s ability to dissipate the heat generated at any given power level
may be affected by a variety of circuit factors.
These include board density, pad size, heat sinks
and air circulation.
TABLE 5 Tantalum Chip Power Dissipation Ratings
Case Code
KEMET
EIA
R
2012-12
S
3216-12
T
3528-12
U
6032-15
V
7343-20
A
3216-18
B
3528-21
C
3062-28
D
7343-31
X
7343-43
E
7260-38
T530D
7343-31
T510X, T530X 7343-43
T510E, T530E 7260-38
12. AC Operation
Permissible AC ripple voltage and current are
related to equivalent series resistance (ESR) and
power dissipation capability.
Permissible AC ripple voltage which may be
applied is limited by three criteria:
a. The positive peak AC voltage plus the DC
bias voltage, if any, must not exceed the DC
voltage rating of the capacitor.
b. The negative peak AC voltage, in combination
with the bias voltage, if any, must not exceed
the permissible reverse voltage ratings presented in Table 3.
c. The power dissipated in the ESR of the capacitor must not exceed the appropriate value
specified in Table 5.
Actual power dissipated may be calculated from
the following:
P =l R
Substituting I = E ,
P = E2R
Z
Z2
where:
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P = power (watts)
Z = impedance at specified frequency (ohms)
R = equivalent series resistance at specified
frequency (ohms)
Using P max from Table 5, maximum allowable
rms ripple current or voltage may be determined
as follows:
I (max) = P max/R E (max) = Z P max/R
These values should be derated at elevated temperatures as follows:
Temperature
Derating Factor
85C
.9
125C
.4
Maximum Power Dissipation
mW @ +25°C w/+20°C Rise
25
60
70
90
125
75
85
110
150
165
200
255
270
285
ENVIRONMENTAL
13. Temperature Stability
TABLE 6 Temperature Stability Limits
Step
No.
1
Leakage
Dissipation
Temp. Capacitance
Current
Factor
+25C within specified within original within original
tolerance
limit
limit
2
-55C within ± 10%
N/A
within original
of initial value
limit**
3
+25C within ± 5%
within original within original
of initial value
limit
limit**
4
+ 85C within ± 10%
within 10X
within original
of initial value
original limit
limit***
5
+125C *within ± 12%or within 12X
within original
20% of initial
original limit
limit***
value
6
+25C within ± 5%
within original within original
of initial value
limit
limit
*+12% is standard. +15% or +20% applies to certain CV values
Contact KEMET representative for details.
**within 1.5x initial limit for extended CV values.
***within 1.15x initial limit for extended CV values.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
9
Solid Tantalum Surface Mount
SOLID TANTALUM CHIP CAPACITORS
SOLID TANTALUM CHIP CAPACITORS
TANTALUM MnO2 COMPONENT PERFORMANCE CHARACTERISTICS (con’t.)
Mounted capacitors withstand extreme temperature
testing at a succession of continuous steps at
+25°C, -55°C, +25°C, +85°C, +125°C, +25°C, in the
order stated. Capacitors shall be brought to thermal
stability at each test temperature. Capacitance, DF
and DCL are measured at each test temperature
except that DCL is not measured at -55°C. DC bias
of 2.0± 0.5 is recommended for the capacitance
and D F requirements.
14. Thermal Shock
• Mil-Std-202, Method 107, Condition B
Minimum temperature -55°C, mounted
Post Test Performance:
a. Capacitance — within ±5% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
d. ESR — within initial limit
15. Moisture Resistance
• Mil-Std-202, Method 106
Steps 7a and 7b excluded, rated voltage,
42 cycles, mounted
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
d. ESR — within initial limit
• JEDEC J-STD-20C — meets MSL1 for Pb-free
assembly
16. Electrostatic Discharge (ESD)
• Human Body Model
2,000 ±50 volts, 1,500 ±5% ohms, 40 nanosecond pulse each polarity, 1 pulse each
polarity, 5 seconds between pulses, +25C.
• Charged Device Model
200 ± 5 volts, 0 ohms, 40 nanosecond
pulse, each polarity, 9 pulses each polarity,
5 seconds between pulses, +25C.
Product subjected to above test condition
demonstrate no sensitivity to electrostatic
discharge.
17. Long Term Stability
Within the general class of electrolytic capacitors,
solid tantalum capacitors offer unusual stability of
the three important parameters: capacitance, dissipation factor and leakage current. These solidstate devices are not subject to the effects of
electrolysis, deforming or drying-out associated
with liquid-electrolyte capacitors.
When stabilized for measurement at standard
conditions, capacitance will typically change less
than ±3% during a 10,000 hour life test +85°C.
10
The same comparative change has been
observed in shelf tests at +25°C extending for
50,000 hours. (Some of this change may stem
from instrument or fixture error.)
Dissipation factor exhibits no typical trend. Data
from 10,000 hour life test at +85°C show that initial limits (at standard conditions) are not exceeded
at the conclusion of these tests.
Leakage current is more variable than capacitance or DF; in fact, leakage current typically
exhibits a logarithmic dependence in several
respects. Military Specifications permit leakage
current (measured at standard conditions) to rise
by a factor of four over 10,000 hour life tests.
Typical behavior shows a lower rate of change,
which may be negative or positive. Initial leakage
currents are frequently so low (less than 0.1
nanoampere in the smallest CV capacitors) that
changes of several orders of magnitude have no
discernable effect on the usual circuit designs.
18. Failure Mode
Capacitor failure may be induced by exceeding
50% of rated voltage of the capacitor with forward
DC voltage, reverse DC voltage, power dissipation,
or temperature. As with any practical device, these
capacitors also possess an inherent, although low,
failure rate when operated at less than 50% of the
rated voltage of the capacitor.
The dominant failure mode is by short-circuit.
Minor parametric drifts are of no consequence in
circuits suitable for solid tantalum capacitors.
Catastrophic failure occurs as an avalanche in DC
leakage current over a short (millisecond) time
span. The failed capacitor, while called “short-circuited”, may exhibit a DC resistance of 10 to 104
ohm.
If a failed capacitor is in an unprotected lowimpedance circuit, continued flow of current
through the capacitor may obviously produce
severe overheating. The over-heated capacitor
may damage the circuit board or nearby components. Protection against such occurrence is
obtained by current-limiting devices or fuses provided by the circuit design. KEMET’s T496 series
offers a built-in fuse to convert the normal short
circuit failure mode to an open circuit.
Fortunately, the inherent failure rate of KEMET
solid tantalum capacitors is low, and this failure
rate may be further improved by circuit design.
Statistical failure rates are provided for military
capacitors. Relating circuit conditions to failure
rate is aided by the guides in the section following.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
TANTALUM MnO2 COMPONENT PERFORMANCE CHARACTERISTICS (con’t.)
RELIABILITY
(1)
λV = λbπTπCπVπSRπQπE x 1000
19. Reliability Prediction
(2)
λb = 0.00005CWR or 0.0004CSR
Solid tantalum capacitors exhibit no degradation
-0.15
1
1
(3)
πT = exp
failure mode during shelf storage and show a
8.617 • 10-5 TAmb 298
constantly decreasing failure rate (i.e., absence
17
Application-Voltage
of any wear out mechanism) during life tests.
(4)
S=
πV = S
+1
Rated-Voltage
0.6
This failure rate is dependent upon three important application conditions; DC Voltage, ambient
(5)
πC = 1.0 • C.023
temperature, and circuit impedance. Additional
effects are attributable to the capacitance of the
(6)
πSR = Lookup Table
πE = Lookup Table
device and atmospheric and mechanical expoPcs. Fail
sure of the assembled circuit. The 1000 multiplier
(7)
πQ = Pcs. Tested x Hrs. Tested x 100,000
at the end converts the failure rate to parts-perbillion piece-hours. A prediction of the failure rate
FIGURE 11a. MIL-HDBK-217F Notice 2 formulas.
can be made using these application conditions
and the formulas and tables listed in MIL-HDBK217F (Notice 2).
Base Multiplier: The first multiplier is the base
πSR
CR (ΩV)
0.66
multiplier (2) established for the capacitor type.
>0.8
1.0
0.6-0.8
For “CWR-Chips” or surface mount components
1.3
0.4-0.6
the base multiplier is 0.00005, and for “CSR2.0
0.2-0.4
Leaded” devices, the base multiplier is 0.00040.
2.7
0.1-0.2
Temperature: The temperature factor is given as
3.3
<0.1
(3). From this formula, it can be seen that the unity
FIGURE 11b. Table for circuit resistance multipiers.
factor, or 1, is derived at an ambient temperature
of +25C (+298K), and that at temperatures
below this the multiplier is decreasing and at temperatures above this the multiplier is increasing.
Quality Factor: All of these multipliers are
applied to the established or base failure rate of
Voltage: The multiplier for application voltage (4)
the part. The T492 Series is qualified under U.S.
is a two step process: first, the application voltmilitary specification MIL-PRF-55365. Failure
age is compared to 60% of rated voltage, and
rates as low as 0.001% kHr are available under
then this ratio is raised to an exponential power
this test program.
of 17 and added to unity. Consider applications
of 50%, 60%, 70%, 80% and 90% of rated voltFor series not covered by military specifications,
age. The multipliers for these applications would
an internal sampling program is operated by
be 1.045, 2.00, 14.7, 134, and 986, respectively.
KEMET Quality Assurance whereby parts are put
From these results it is evident why manufacturon life test at rated voltage for 2000 hours. The
ers recommend application voltages not to
confidence level chosen for the reporting data is
exceed 50% rated voltages.
60%. (The cost of sampling each batch would be
prohibitive, and no claim is made to guarantee
Capacitance: There is a factor (5) applied to the
the failure rate of each batch.) With this testing
capacitance (in µF) which effectively increases
and each new qualification test for new parts, the
the failure rate for increasing capacitance
average failure rate for all commercial Series lies
(increases in effective area resulting in increases
between 0.1% and 1.0% per thousandin possible faults).
piece-hours.
Series Resistance: The series resistance is only
FIT Calculator
concerned with the resistance per application
bias (ohms per volt) external to the capacitor,
All of these factors are gathered into a Windows
and does not include the ESR as a factor.
based software, available free from the KEMET
web site (www.kemet.com). The “FIT Calculator”
Environmental: The environmental factor is
software does all the calculations and look-ups
determined by the harshness of the ambient
based on information entered or selected by the
conditions beyond temperature. An explanation
operator. A manual may also be downloaded
of these ratings is included in the MIL specificafrom the same web page to explain the controls
tion and are too extensive to be covered here. In
and displays The manual as well as a help
most cases, this factor is set to ground benign or
screen also detail the environmental conditions.
GB, with the resulting factor equal to “1”.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
11
[
(
)]
( )
(
)
Solid Tantalum Surface Mount
SOLID TANTALUM CHIP CAPACITORS
SOLID TANTALUM CHIP CAPACITORS
TANTALUM MnO2 COMPONENT PERFORMANCE CHARACTERISTICS (con’t.)
20. Surge Current
All conventional reliability testing is conducted
under steady-state DC voltage. Experience indicates that AC ripple, within the limits prescribed,
has little effect on failure rate. Heavy surge currents are possible in some applications, however. Circuit impedance may be very low (below the
recommended 0.1 ohm/volt) or there may be driving inductance to cause voltage “ringing.” Surge
current may appear during turn-on of equipment,
for example. Failure rate under current-surge
conditions may not be predictable from conventional life test data.
Capacitors are capable of withstanding a 4 ±1
second charge of rated voltage (±2%) through a
total circuit resistance (excluding the capacitor) of
1 ±0.2 ohms at +25°C, followed by a 4 ±1 second
discharge to a voltage below 1% of the rated voltage. This cycle is repeated consecutively three
(3) times. Post test performance:
a. Capacitance — within ±5% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
100% production surge current testing is performed on all Tantalum Chip series for case sizes
C, D, E, X, U, V. The total test circuit resistance
is ≤ 0.5 ohms. The applied voltage is 75% of
rated voltage for all series except the T495 and
T510 which are surged at 100% of rated voltage.
Four surge cycles are applied. Parts not capable
of surviving this test are removed at subsequent
electrical screening. See T493 Series on page 22
for specific surge options.
21. Storage Life Test
• 2,000 hours, +125 C, Unbiased, Mounted
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
d. ESR — within initial limit
e. Physical — no degradation of function
22. Standard Life Test
• 2,000 hours, +85 C, Rated Voltage, Mounted
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within 125% of initial limit
c. Dissipation Factor — within initial limit
d. ESR — within initial limit
e. Physical — no degradation of function
MECHANICAL
24. Resistance to Solvents
• Mil-Std-202, Method 215
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor -— within initial limit
d. Physical — no degradation of case, terminals or marking.
25. Fungus
• Mil-Std-810, Method 508
26. Flammability
• UL94 VO Classification
Encapsulant materials meet this
classification.
27. Resistance to Soldering Heat
• Wave Solder
+260 ±5 C, 10 Seconds
• Infrared Reflow
+230 ±5 C, 30 Seconds
• Vapor Phase Reflow
+215 ±5 C, 2 minutes
Post Test Performance:
a. Capacitance — within ±10% of Initial Value
b. DC Leakage — within Initial Limit
c. Dissipation Factor — within Initial Limit
28. Solderability
• Mil-Std-202, Method 208
• ANSI/J-STD-002, Test B
Applies to Solder and Tin Coated terminations
only. Does not apply to optional gold-plated terminations.
29. Vibration
• Mil-Std-202, Method 204, Condition D,
10 Hz to 2,000 Hz, 20G Peak
Post Test Performance:
a. Capacitance — within ± 10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
30. Shock
• Mil-Std-202, Method 213, Condition I,
100 G Peak
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
23. High Temperature Life Test
• 2,000 hours, +125 C, 2/3 Rated Voltage,
31. Terminal Strength
Mounted
• Pull Force
Post Test Performance:
• One Pound (454 grams), 30 Seconds
a. Capacitance — within ±10% of initial value
b. DC Leakage — within 125% of initial limit
c. Dissipation Factor — within initial limit
d. ESR — within initial limit
e. Physical — no degradation of function
12
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
TANTALUM MnO2 COMPONENT PERFORMANCE CHARACTERISTICS (con’t.)
• Tensile Force
• Four Pounds (1.8 kilograms), 60 Seconds
4 lb. (1.8 Kg)
• Shear Force
Table 8 Maximum Shear Loads
Case Code
KEMET
EIA
R
2012-12
S
3216-12
T
3528-12
U
6032-15
V
7343-20
A
3216-18
B
3528-21
C
6032-28
D
7343-31
X
7343-43
E
7260-38
Maximum Shear Loads
Kilograms
Pounds
2.4
5.3
3.2
7.0
3.6
8.0
4.5
10.0
5.0
11.0
3.2
7.0
3.6
8.0
4.5
10.0
5.0
11.0
5.0
11.0
5.0
11.0
Post Test Performance:
a. Capacitance — within ±5% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
APPLICATIONS
32. Handling
Automatic handling of encapsulated components
is enhanced by the molded case which provides
compatibility with all types of high speed pick and
place equipment. Manual handling of these
devices presents no unique problems. Care
should be taken with your fingers, however, to
avoid touching the solder-coated terminations as
body oils, acids and salts will degrade the solderability of these terminations. Finger cots
should be used whenever manually handling all
solderable surfaces.
and Pb-Free soldering processes.
90Sn/10Pb terminations are also available and
can be ordered with an "H" suffix.
KEMET's "S" suffix remains an active termination
designator for current designs but is not recommended for new designs. Parts ordered with an
"S" suffix are not guaranteed to be Pb-Free or
RoHS compliant. Refer to www.kemet.com for
information on Pb-Free transition.
For conductive adhesive attachment processes, a
gold termination finish is available for most series and
case sizes. Refer to the specific series for details.
34. Recommended Mounting Pad Geometries
Proper mounting pad geometries are essential
for successful solder connections. These dimensions are highly process sensitive and should be
designed to maximize the integrity of the solder
joint, and to minimize component rework due to
unacceptable solder joints.
Figure 12 illustrates pad geometry. Tables 9 &
10 provide recommended pad dimensions for
both wave and reflow soldering techniques.
These dimensions are intended to be a starting
point for circuit board designers, to
be fine tuned, if necessary, based upon the peculiarities of the soldering process and/or circuit
board design.
Contact KEMET for Engineering Bulletin Number
F-2100 entitled “Surface Mount Mounting Pad
Dimensions and Considerations” for further
details on this subject.
C
Grid
Placement
Courtyard
X
G
Y
Z
Figure 12
Table 9 – Land Pattern Dimensions for Reflow Solder
Pad Dimensions - mm
Y
C
Z
G
X
(ref) (ref)
3.90 0.80 1.80 1.55 2.35
R/2012-12
4.70 0.80 1.50 1.95 2.75
A/3216-18, S/3216-12
5.00 1.10 2.50 1.95 3.05
B/3528-21, T/3528-12
7.60 2.50 2.50 2.55 5.05
C/6032-28, U/6032-15
D/7343-31, V/7343-20, X/7343-43 8.90 3.80 2.70 2.55 6.35
E/7260-38
8.90 3.80 4.40 2.55 6.35
KEMET/EIA Size Code
33. Termination Coating
Table 10 – Land Pattern Dimensions for Wave Solder
KEMET's standard termination finish is 100% Sn
Pad Dimensions - mm
(Excluding the T492/3 series. Refer to specific
Y
C
KEMET/EIA Size Code
Z
G
X
(ref) (ref)
lead frame options available on T493 Series).
4.30 0.80 1.26 1.75 2.55
R/2012-12
Standard terminations can be ordered with a "T"
5.10 0.80 1.10 2.15 2.95
A/3216-18, S/3216-12
suffix in the lead material designator of the
5.40 1.10 1.80 2.15 3.25
B/3528-21, T/3528-12
KEMET part number. Components ordered with
8.00 2.50 1.80 2.75 5.25
C/6032-28, U/6032-15
the "T" suffix are Pb-Free/RoHS compliant and
D/7343-31, V/7343-20, X/7343-43 9.70 3.80 2.70 2.95 6.75
E/7260-38
9.70 3.80 4.40 2.95 6.75
are backward and forward compatible with SnPb
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
13
Solid Tantalum Surface Mount
SOLID TANTALUM CHIP CAPACITORS
SOLID TANTALUM CHIP CAPACITORS
TANTALUM MnO2 COMPONENT PERFORMANCE CHARACTERISTICS (con’t.)
35. Soldering
KEMET’s families of surface mount tantalum
capacitors are compatible with wave (single or
dual) soldering and IR or vapor phase reflow
techniques. Solder-coated terminations have
excellent wetting characteristics for high integrity
solder fillets. Preheating of these components is
recommended to avoid extreme thermal stress.
Figure 13 represents recommended maximum
solder temperature / time combinations for these
devices.
Note that although the X/7343-43 case size can
withstand wave soldering, the tall profile (4.3mm
maximum) dictates care in wave process development.
Sn-Pb Profile
Temperature (°C)
300
5 Sec.
250
200
45 Sec.
100
90 Sec.
50
95 Sec.
0
0
50
60 Sec.
100
150
200
250
300
Time (Seconds)
Pb-Free Profile
260˚C Peak Temperature (3 passes)
FIGURE 13
Time/Temperature Soldering Profile
Hand-soldering should be performed with care
due to the difficulty in process control. If performed, care should be taken to avoid contact of
the soldering iron to the molded case. The iron
should be used to heat the solder pad, applying
solder between the pad and the termination, until
reflow occurs. The iron should be removed.
“Wiping” the edges of a chip and heating the top
surface is not recommended.
14
36. Washing
Standard washing techniques and solvents are
compatible with all KEMET surface mount tantalum capacitors. Solvents such as Freon TMC and
TMS, Trichlorethane, methylene chloride, prelete,
and isopropyl alcohol are not harmful to these
components.
If ultrasonic agitation is utilized in the cleaning
process, care should be taken to minimize energy levels and exposure times to avoid damage to
the terminations.
KEMET tantalum chips are also compatible with
newer aqueous and semi-aqueous processes.
Please follow the recommendations for cleaning
as defined by the solder vendor.
37. Encapsulations
Under normal circumstances, potting or encapsulation of KEMET tantalum chips is not required.
150
45 Sec.
During typical reflow operations a slight darkening of the gold-colored epoxy may be observed.
This slight darkening is normal and is not harmful
to the product. Marking permanency is not affected by this change.
38. Storage Environment
Tantalum chip capacitors should be stored in
normal working environments. While the chips
themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In
addition, packaging materials will be degraded
by high temperature – reels may soften or warp,
and tape peel force may increase. KEMET recommends that maximum storage temperature
not exceed 40 degrees C, and maximum storage
humidity not exceed 60% relative humidity. In
addition, temperature fluctuations should be
minimized to avoid condensation on the parts,
and atmospheres should be free of chlorine and
sulfur bearing compounds. For optimized solderability, chip stock should be used promptly,
preferably within 3 years of receipt.
39. Component Weights
• T49x, T510 Series
Series
Case Size
Typical Weight
(mg)
T49x
T49x
T49x
T49x
T49x
T49x
T49x
T49x
T49x
T49x
T49x
T510
T510
T510
A/3216-18
B/3528-21
C/6032-28
D/7343-31
X/7343-43
E/7360-38
R/2012-12
S/3216-12
T/3528-12
U/6032-15
V/7343-20
D/7343-31
X/7343-43
E/7360-38
32
60
130
320
500
600
10
21
34
70
206
338
510
645
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
FEATURES
•
•
•
•
•
•
•
•
Meets or Exceeds EIA Standard 535BAAC
Taped and Reeled per EIA 481-1
Symmetrical, Compliant Terminations
Optional Gold-plated Terminations
Laser-marked Case
100% Surge current test on C, D, E, U, V, X sizes
Halogen Free Epoxy
Capacitance: 0.1 F to 1000 F
Tolerance: ±10%, ±20%
Voltage: 2.5-50 VDC
Extended Range Values
Low Profile Case Sizes
RoHS Compliance & Lead Free Terminations
(See www.kemet.com for transition information)
Operating Temperature: -55˚C to +125˚C
•
•
•
•
•
•
CAPACITOR OUTLINE DRAWING
CATHODE (-) END
VIEW
SIDE VIEW
ANODE (+) END
VIEW
B
W
BOTTOM VIEW
B
H
E
K
T
S
X
F
P
S
G
A
L
Termination
cutout at
KEMET’s
Option,
either end
R
STANDARD T491 DIMENSIONS
Millimeters (inches)
CASE SIZE
KEMET
EIA
A
3216-18
B
3528-21
C
6032-28
D
7343-31
X
7343-43
E
7260-38
COMPONENT
± 0.1
± 0.3
B ± 0.15
± (.004) S* ± (.012) (Ref) ± (.006)
K* ±± 0.20
(.008) F*
L*
W*
H*
3.2 ± 0.2
(.126 ± .008)
3.5 ± 0.2
(.138 ± .008)
6.0 ± 0.3
(.236 ± .012)
7.3 ± 0.3
(.287 ± .012)
7.3 ± 0.3
(.287 ± .012)
7.3 ± 0.3
(.287 ± .012)
1.6 ±0.2
(.063 ±.008)
2.8 ± 0.2
(.110 ± .008)
3.2 ± 0.3
(.126 ± .012)
4.3 ± 0.3
(.169 ± .012)
4.3 ± 0.3
(.169 ± .012)
6.0 ± 0.3
(.236 ± .012)
1.6 ± 0.2
(.063 ± .008)
1.9 ± 0.2
(.075 ± .008)
2.5 ± 0.3
(.098 ± .012)
2.8 ± 0.3
(.110 ± .012)
4.0 ± 0.3
(.157 ± .012)
3.6 ± 0.2
(.142 ± .008)
0.9
(.035)
1.1
(.043)
1.4
(.055)
1.5
(.059)
2.3
(.091)
2.3
(.091)
1.2
(.047)
2.2
(.087)
2.2
(.087)
2.4
(.094)
2.4
(.094)
4.1
(.161)
0.4
(.016)
0.4
(.016)
0.5
(.020)
0.5
(.020)
0.5
(.020)
0.5
(.020)
0.8
(.031)
0.8
(.031)
1.3
(.051)
1.3
(.051)
1.3
(.051)
1.3
(.051)
X
(Ref)
P
R
T
A
G
E
(Ref) (Ref) (Ref) (Min) (Ref) (Ref)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.4
(.016)
0.5
(.020)
0.9
(.035)
0.9
(.035)
1.7
(.067)
0.9
(.035)
0.4
(.016)
1.0
(.039)
1.0
(.039)
1.0
(.039)
1.0
(.039)
1.0
(.039)
0.13
(.005)
0.13
(.005)
0.13
(.005)
0.13
(.005)
0.13
(.005)
0.13
(.005)
1.1
(.043)
1.8
(.071)
2.8
(.110)
3.5
(.138)
3.5
(.138)
3.5
(.138)
1.4
(.055)
2.1
(.083)
3.1
(.122)
3.8
(.150)
3.8
(.150)
3.8
(.150)
1.3
(.051)
2.2
(.087)
2.4
(.094)
3.5
(.138)
3.5
(.138)
3.5
(.138)
Notes: 1. Metric dimensions govern.
2. (Ref) - Dimensions provided for reference only.
* Mil-C-55365/8 Specified Dimensions
LOW PROFILE T491 DIMENSIONS
Millimeters (inches)
CASE SIZE
COMPONENT
KEMET
EIA
L
W
H Max.
K Min.
F ± 0.1
S ± 0.3
X
(Ref)
T
(Ref)
A
(Min)
G
(Ref)
E
(Ref)
R
2012-12
S
3216-12
2.0 ± 0.2
(.079 ± .008)
3.2 ± 0.2
(.126 .008)
3.5 ± 0.2
(.138 ± .008)
6.0 0.3
(.236 .012)
7.3 ± 0.3
(.287 ± .012)
1.3 ± 0.2
(.051 ± .008)
1.6 ± 0.2
1.2
(.047)
1.2
(.047)
1.2
(.047)
1.5
(.059)
2.0
(.079)
0.3
(.012)
0.3
(.012)
0.3
(.012)
0.5
(.020)
0.9
(.035)
0.9
(.035)
1.2
(.047)
2.2
(.087)
2.2
(.087)
2.4
(.094)
0.5
(.020)
0.8
(.031)
0.8
(.031)
1.3
(.051)
1.3
(.051)
0.05
(.002)
0.05
(.002)
0.05
(.002)
0.05
(.002)
0.05
(.002)
0.13
(.005)
0.13
(.005)
0.13
(.005)
0.13
(.005)
0.13
(.005)
0.8
(.031)
1.4
(.055)
2.1
(.083)
3.1
(.122)
3.8
(.150)
0.5
(.020)
1.1
(.043)
1.8
(.071)
2.8
(.110)
3.5
(.138)
0.8
(.031)
1.3
(.051)
2.2
(.087)
2.4
(.094)
3.5
(.138)
T
U
V
3528-12
6032-15
7343-20
2.8 ± 0.2
(.1 ± .008)
4.3 ± 0.3
(.169 ± .012)
Notes: 1. Metric dimensions govern.
.
3. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch.
T491 ORDERING INFORMATION
T
491
Tantalum
Series
T491 - Precision Molded
B
105
M
035
A
S*
*Pb-free supply is not guaranteed with
the ‘S’ termination code.
This termination code not available
effective 15 July 2007.
Lead Material
T = 100% Tin (Sn) Plated
H = Tin/Lead (SnPb 5% Pb minimum)
G = Gold Plated (A,B,C,D,X only)
**S = Not recommended for new designs
Case Size
A,B,C,D,E,R,S,T,U,V,X
Failure Rate
A = Not Applicable
Voltage
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
*Part number example: T491B105M035AT (14 digits - no spaces). See www.kemet.com for Pb Free transition.
** “S” Termination codes are converting from 90Sn/10 Pb to 100% tin finishes. Orders including “S” suffix
termination codes do not quarantee Pb-free product.
As shown
Capacitance Tolerance
M = ±20%; K = ±10%
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
15
Solid Tantalum Surface Mount
T491 SERIES - Precision Molded Chip
SOLID TANTALUM CHIP CAPACITORS
T491 SERIES—Precision Molded Chip
T491 TANTALUM CHIP CAPACITANCE VALUES
Case Size by Capacitance and Voltage
Capacitance
μF
16
Code
Rated Voltage @ +85°C
2.5
3
4
6
10
16
20
25
35
50
0.10
104
A
A
0.15
154
A
A/B
0.22
224
A
B
0.33
334
A
A
B
0.47
474
A
A/B
B/C
0.68
684
A
A
A/B
B/C
1.0
105
A
R/S/A
A/B
A/B
V/C
1.5
155
A
A
S/A
A/B
B/C
C/D
2.2
225
R/A
A/B
R/S/A
A/B
B/C
B/C
C/D
3.3
335
A
A
R/S/A
A/B
T/A/B
B/C
B/C
D
4.7
475
A
S/A
A/B/T
A/B/C
A/B/C
B/C/D
D
6.8
685
S/A
A/B/C
U/A/B/C
B/C
C/D
D/X
10.0
106
B/C/U
T/A
U/B/C
B/C/D
V/C/D
D/X
15.0
156
U/A/B/C
C/D
C/D
C/D/X
X
22.0
226
U/B
C/D
V/C/D
V/C/D
D/X
33.0
336
D/X
X
47.0
476
68.0
686
100.0
107
150.0
157
R/S
A/B
S/T
A/B
S/T
A/B/C
U
A/B/C
U
A/B/C
U/A
B/C/D
T/U/A
B/C/D
V/B
C/D
220.0
227
330.0
A
R/S
A/B
R/S/T
A/B
S
A/B/C
U/T
A/B/C
T/U
A/B/C
T/U/A
B/C/D
U/B
C/D
U/V
B/C/D
A/B
R/S
S/T
A/B
S/T/A
B/C
U
A/B/C
T/U
A/B/C
U/V
B/C/D
U/V
B/C/D
U/V
B/C/D
U/C
V/C/D
V/C/D
D
D/X
V/D
D/X
D/X
V/C/D
V/D/X
D//E
V/C/D
V/C
D/X
D/X
V/B
V
D/X
V/D/X
X
337
V/C/D
D/X
D/X/E
470.0
477
D/X
D/X/E
X/E
680.0
687
D/X
E
1000.0
108
X/E
T
X/E
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
Solid Tantalum Surface Mount
T491 SERIES - Precision Molded Chip
T491 RATINGS & PART NUMBER REFERENCE
Capacitance
µF
100.0
220.0
#33.0
3.3
4.7
6.8
6.8
10.0
10.0
#10.0
#10.0
15.0
15.0
15.0
#15.0
22.0
22.0
#22.0
#22.0
22.0
33.0
33.0
33.0
#33.0
#33.0
47.0
47.0
#47.0
#47.0
#47.0
68.0
68.0
#68.0
#68.0
#68.0
100.0
#100.0
#100.0
#100.0
†100.0
†100.0
150.0
150.0
#150.0
†150.0
#220.0
#220.0
330.0
†330.0
#330.0
#470.0
#470.0
#680.0
#680.0
#1000.0
#1000.0
2.2
2.2
3.3
4.7
4.7
6.8
6.8
#6.8
#6.8
10.0
10.0
10.0
#10.0
#10.0
DC
DF %
Leakage
@ +25ºC
120 Hz
μA @ 25ºC
Max
Max
2.5 Volt Rating at +85ºC (1.7 Volt Rating at +125ºC)
T
T491T107(1)2R5A(2)
2.5
24.0
5.5
8.0
D
T491D227(1)2R5A(2)
3 Volt Rating at +85ºC (2 Volt Rating at +125ºC)
A
T491A336(1)003A(2)
1.0
6.0
4 Volt Rating at +85ºC (2.7 Volt Rating at +125ºC)
A
T491A335(1)004A(2)
0.5
6.0
A
T491A475(1)004A(2)
0.5
6.0
A
T491A685(1)004A(2)
0.5
6.0
0.5
6.0
S
T491S685(1)004A(2)
0.5
6.0
B
T491B106(1)004A(2)
A
T491A106(1)004A(2)
0.5
6.0
0.5
6.0
S
T491S106(1)004A(2)
0.5
8.0
R
T491R106(1)004A(2)
0.6
6.0
B
T491B156(1)004A(2)
A
T491A156(1)004A(2)
0.6
6.0
0.6
6.0
T
T491T156(1)004A(2)
0.6
10.0
S
T491S156(1)004A(2)
0.9
6.0
C
T491C226(1)004A(2)
0.9
6.0
B
T491B226(1)004A(2)
A
T491A226(1)004A(2)
0.9
6.0
0.9
6.0
T
T491T226(1)004A(2)
0.9
10.0
S
T491S226(1)004A(2)
1.3
6.0
C
T491C336(1)004A(2)
1.3
6.0
U
T491U336(1)004A(2)
1.3
6.0
B
T491B336(1)004A(2)
A
T491A336(1)004A(2)
1.3
6.0
1.3
8.0
T
T491T336(1)004A(2)
1.9
6.0
C
T491C476(1)004A(2)
1.9
6.0
U
T491U476(1)004A(2)
1.9
6.0
B
T491B476(1)004A(2)
A
T491A476M004A(2)
1.9
12.0
1.9
12.0
T
T491T476M004A(2)
2.7
6.0
D
T491D686(1)004A(2)
2.7
6.0
C
T491C686(1)004A(2)
2.7
6.0
U
T491U686(1)004A(2)
2.7
6.0
B
T491B686(1)004A(2)
A
T491A686(1)004A(2)
2.8
30.0
4.0
8.0
D
T491D107(1)004A(2)
4.0
8.0
C
T491C107(1)004A(2)
4.0
10.0
U
T491U107(1)004A(2)
4.0
8.0
B
T491B107M004A(2)
A
T491A107M004A(2)
4.0
30.0
T
T491T107M004A(2)
4.0
30.0
6.0
8.0
D
T491D157(1)004A(2)
6.0
8.0
V
T491V157(1)004A(2)
6.0
8.0
C
T491C157(1)004A(2)
B
T491B157M004A(2)
6.0
12.0
8.8
8.0
V
T491V227(1)004A(2)
8.8
18.0
B
T491B227M004A(2)
13.2
8.0
D
T491D337(1)004A(2)
V
T491V337(1)004A(2)
13.2
12.0
13.2
10.0
C
T491C337(1)004A(2)
X
T491X477(1)004A(2)
18.8
8.0
18.8
8.0
D
T491D477(1)004A(2)
X
T491X687(1)004A(2)
27.2
12.0
27.2
12.0
D
T491D687(1)004A(2)
X
T491X108(1)004A(2)
40.0
12.0
E
T491E108M004A(2)
40.0
15.0
**6 Volt Rating at +85ºC (4 Volt Rating at +125ºC)
R
T491R225(1)006A(2)
0.5
6.0
A
T491A225(1)006A(2)
0.5
6.0
A
T491A335(1)006A(2)
0.5
6.0
A
T491A475(1)006A(2)
0.5
6.0
0.5
6.0
S
T491S475(1)006A(2)
0.5
6.0
B
T491B685(1)006A(2)
A
T491A685(1)006A(2)
0.5
6.0
0.5
6.0
S
T491S685(1)006A(2)
0.5
8.0
R
T491R685(1)006A(2)
0.6
6.0
B
T491B106(1)006A(2)
A
T491A106(1)006A(2)
0.6
6.0
0.6
6.0
T
T491T106(1)006A(2)
0.6
10.0
S
T491S106(1)006A(2)
0.6
8.0
R
T491R106(1)006A(2)
Case
Size
KEMET
Part Number
ESR Ω
@ +25°C
100 kHz
Max
3.9
0.3
4.0
8.0
8.0
6.0
15.0
3.5
6.0
15.0
10.0
3.5
4.0
5.0
15.0
1.8
3.5
4.0
5.0
10.0
1.8
1.8
3.5
4.0
5.0
1.8
1.8
3.0
2.5
6.0
0.8
1.6
1.8
3.5
4.0
0.8
1.2
1.8
0.9
4.0
5.0
0.8
0.7
1.2
2.0
0.7
0.5
0.7
0.7
0.9
0.5
0.8
0.5
0.5
0.5
0.2
25.0
8.0
8.0
6.0
15.0
3.5
6.0
15.0
15.0
3.5
4.0
5.0
15.0
10.0
Capacitance
µF
15.0
15.0
#15.0
#15.0
#15.0
22.0
22.0
22.0
#22.0
#22.0
33.0
33.0
#33.0
#33.0
#33.0
47.0
47.0
#47.0
#47.0
†47.0
*47.0
68.0
#68.0
#68.0
#68.0
#68.0
100.0
100.0
#100.0
#100.0
#100.0
150.0
#150.0
#150.0
220.0
#220.0
#220.0
#220.0
330.0
330.0
330.0
470.0
470.0
470.0
680.0
1.5
2.2
2.2
3.3
3.3
#3.3
4.7
4.7
#4.7
#4.7
6.8
6.8
6.8
#6.8
10.0
10.0
#10.0
#10.0
#10.0
15.0
15.0
15.0
#15.0
#15.0
Case
Size
KEMET
Part Number
DC
Leakage
μA @ 25ºC
Max
DF %
@ +25ºC
120 Hz
Max
**6 Volt Rating at +85ºC (4 Volt Rating at +125ºC)
0.9
6.0
C
T491C156(1)006A(2)
0.9
6.0
B
T491B156(1)006A(2)
A
T491A156(1)006A(2)
0.9
6.0
0.9
6.0
T
T491T156(1)006A(2)
0.9
15.0
S
T491S156(1)006A(2)
1.4
6.0
C
T491C226(1)006A(2)
1.4
6.0
U
T491U226(1)006A(2)
1.4
6.0
B
T491B226(1)006A(2)
A
T491A226(1)006A(2)
1.4
6.0
1.4
8.0
T
T491T226(1)006A(2)
2.0
6.0
C
T491C336(1)006A(2)
2.0
6.0
U
T491U336(1)006A(2)
2.0
6.0
B
T491B336(1)006A(2)
A
T491A336(1)006A(2)
2.0
12.0
2.0
12.0
T
T491T336(1)006A(2)
2.9
6.0
D
T491D476(1)006A(2)
2.9
6.0
C
T491C476(1)006A(2)
2.9
6.0
U
T491U476(1)006A(2)
2.9
6.0
B
T491B476(1)006A(2)
A
T491A476M006A(2)
3.0
12.0
3.0
24.0
T
T491T476(1)006A(2)
4.1
6.0
D
T491D686(1)006A(2)
4.1
6.0
C
T491C686(1)006A(2)
4.1
10.0
U
T491U686(1)006A(2)
4.1
8.0
B
T491B686(1)006A(2)
A
T491A686(1)006A(2)
5.0
30.0
6.0
8.0
D
T491D107(1)006A(2)
6.0
8.0
V
T491V107(1)006A(2)
6.0
8.0
C
T491C107(1)006A(2)
6.0
10.0
U
T491U107(1)006A(2)
6.3
15.0
B
T491B107(1)006A(2)
9.0
8.0
D
T491D157(1)006A(2)
9.0
8.0
C
T491C157(1)006A(2)
9.0
8.0
V
T491V157(1)006A(2)
X
T491X227(1)006A(2)
13.2
8.0
13.2
8.0
D
T491D227(1)006A(2)
13.2
10.0
C
T491C227M006A(2)
13.2
12.0
V
T491V227(1)006A(2)
X
T491X337(1)006A(2)
19.8
8.0
19.8
8.0
D
T491D337(1)006A(2)
20.8
8.0
E
T491E337(1)006A(2)
X
T491X477(1)006A(2)
28.2
10.0
28.2
12.0
D
T491D477M006A(2)
29.6
10.0
E
T491E477(1)006A(2)
40.8
12.0
E
T491E687M006A(2)
10 Volt Rating at +85ºC (7 Volt Rating at +125ºC)
A
T491A155(1)010A(2)
0.5
6.0
0.5
6.0
B
T491B225(1)010A(2)
A
T491A225(1)010A(2)
0.5
6.0
A
T491A335(1)010A(2)
0.5
6.0
0.5
6.0
S
T491S335(1)010A(2)
0.3
8.0
R
T491R335(1)010A(2)
0.5
6.0
B
T491B475(1)010A(2)
A
T491A475(1)010A(2)
0.5
6.0
0.5
6.0
S
T491S475(1)010A(2)
0.5
8.0
R
T491R475(1)010A(2)
0.7
6.0
B
T491B685(1)010A(2)
A
T491A685(1)010A(2)
0.7
6.0
0.7
6.0
T
T491T685(1)010A(2)
0.7
10.0
S
T491S685(1)010A(2)
1.0
6.0
C
T491C106(1)010A(2)
1.0
6.0
B
T491B106(1)010A(2)
A
T491A106(1)010A(2)
1.0
6.0
1.0
6.0
T
T491T106(1)010A(2)
1.0
10.0
S
T491S106(1)010A(2)
1.5
6.0
C
T491C156(1)010A(2)
1.5
6.0
U
T491U156(1)010A(2)
1.5
6.0
B
T491B156(1)010A(2)
A
T491A156(1)010A(2)
1.5
8.0
1.5
8.0
T
T491T156(1)010A(2)
ESR Ω
@ +25°C
100 kHz
Max
1.8
3.5
3.5
5.0
10.0
1.8
1.8
3.5
4.0
5.0
1.8
1.8
3.0
2.5
6.0
0.8
1.6
1.8
2.0
3.5
4.4
0.8
1.2
1.8
0.9
4.0
0.8
0.7
0.9
1.8
3.0
0.7
1.2
0.7
0.7
0.7
1.2
0.7
0.4
0.4
0.5
0.4
0.4
0.4
0.5
8.0
3.5
8.0
6.0
15.0
15.0
3.5
5.0
15.0
10.0
3.5
4.0
5.0
15.0
1.8
3.5
4.0
5.0
15.0
1.8
1.8
2.8
6.0
5.0
(1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance.
(2) To complete KEMET Part Number, insert T, H, G, or S lead material designation as shown on page 15.
*Extended Values
**6 Volt product equivalent to 6.3 volt product.
#Maximum Capacitance Change @ 125ºC=+15%.
†Maximum Capacitance Change @ 125ºC=+20%.
Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’s option.
Voltage substitutions will be marked with the higher voltage rating.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
17
SOLID TANTALUM CHIP CAPACITORS
T491 SERIES—Precision Molded Chip
T491 RATINGS & PART NUMBER REFERENCE
CapaciCapacitance
tance
µF
μF
22.0
22.0
#22.0
#22.0
#22.0
33.0
33.0
33.0
#33.0
#33.0
47.0
47.0
#47.0
#47.0
#47.0
68.0
68.0
#68.0
#68.0
#68.0
100.0
#100.0
#100.0
150.0
#150.0
#150.0
#150.0
#220.0
#220.0
#220.0
#330.0
#330.0
#330.0
#470.0
#470.0
1.0
1.5
2.2
2.2
#2.2
3.3
3.3
4.7
4.7
4.7
4.7
6.8
6.8
#6.8
10.0
10.0
10.0
#10.0
#10.0
15.0
15.0
15.0
#15.0
22.0
22.0
#22.0
#22.0
33.0
#33.0
#33.0
47.0
47.0
#47.0
68.0
68.0
Case
Case
Size
Size
KEMET
KEMET
Part Number
Part Number
DC
DC
Leakage
Leakage
μA @ 25ºC
Max
DF %
@ +25ºC
120 Hz
Max
10 Volt Rating at +85ºC (7 Volt Rating at +125ºC)
2.2
6.0
C
T491C226(1)010A(2)
2.2
6.0
U
T491U226(1)010A(2)
2.2
6.0
B
T491B226(1)010A(2)
A
T491A226M010A(2)
2.2
10.0
2.2
12.0
T
T491T226(1)010A(2)
3.3
6.0
D
T491D336(1)010A(2)
3.3
6.0
V
T491V336(1)010A(2)
3.3
6.0
C
T491C336(1)010A(2)
3.3
6.0
U
T491U336(1)010A(2)
3.3
6.0
B
T491B336(1)010A(2)
4.7
6.0
D
T491D476(1)010A(2)
4.7
6.0
V
T491V476(1)010A(2)
4.7
6.0
C
T491C476(1)010A(2)
4.7
10.0
U
T491U476(1)010A(2)
4.7
8.0
B
T491B476(1)010A(2)
6.8
6.0
D
T491D686(1)010A(2)
6.8
6.0
V
T491V686(1)010A(2)
6.8
6.0
C
T491C686(1)010A(2)
6.8
10.0
U
T491U686(1)010A(2)
6.8
10.0
B
T491B686M010A(2)
10.0
8.0
D
T491D107(1)010A(2)
10.0
8.0
C
T491C107(1)010A(2)
10.0
8.0
V
T491V107(1)010A(2)
X
T491X157(1)010A(2)
15.0
8.0
15.0
8.0
D
T491D157(1)010A(2)
15.0
10.0
C
T491C157(1)010A(2)
15.0
8.0
V
T491V157(1)010A(2)
X
T491X227(1)010A(2)
22.0
8.0
22.0
8.0
D
T491D227(1)010A(2)
22.0
12.0
V
T491V227(1)010A(2)
33.0
10.0
D
T491D337M010A(2)
X
T491X337(1)010A(2)
33.0
10.0
33.0
10.0
E
T491E337(1)010A(2)
X
T491X477(1)010A(2)
47.0
10.0
E
T491E477M010A(2)
47.0
12.0
16 Volt Rating at +85ºC (10 Volt Rating at +125ºC)
A
T491A105(1)016A(2)
0.5
4.0
A
T491A155(1)016A(2)
0.5
6.0
A
T491A225(1)016A(2)
0.5
6.0
0.5
6.0
S
T491S225(1)016A(2)
0.5
8.0
R
T491R225(1)016A(2)
0.5
6.0
B
T491B335(1)016A(2)
A
T491A335(1)016A(2)
0.5
6.0
0.75
6.0
C
T491C475(1)016A(2)
0.8
6.0
B
T491B475(1)016A(2)
A
T491A475(1)016A(2)
0.8
6.0
0.8
6.0
T
T491T475(1)016A(2)
1.1
6.0
C
T491C685(1)016A(2)
1.1
6.0
B
T491B685(1)016A(2)
A
T491A685(1)016A(2)
1.1
6.0
1.6
6.0
C
T491C106(1)016A(2)
1.6
6.0
U
T491U106(1)016A(2)
1.6
6.0
B
T491B106(1)016A(2)
A
T491A106(1)016A(2)
1.6
8.0
1.6
8.0
T
T491T106(1)016A(2)
2.4
6.0
C
T491C156(1)016A(2)
2.4
6.0
U
T491U156(1)016A(2)
2.4
6.0
B
T491B156(1)016A(2)
A
T491A156(1)016A(2)
2.4
8.0
3.6
6.0
D
T491D226(1)016A(2)
3.6
6.0
C
T491C226(1)016A(2)
3.6
10.0
U
T491U226(1)016A(2)
3.6
6.0
B
T491B226(1)016A(2)
5.3
6.0
D
T491D336(1)016A(2)
5.3
6.0
C
T491C336(1)016A(2)
5.3
12.0
U
T491U336(1)016A(2)
7.5
6.0
D
T491D476(1)016A(2)
7.5
6.0
V
T491V476(1)016A(2)
7.5
6.0
C
T491C476(1)016A(2)
10.9
6.0
V
T491V686(1)016A(2)
10.9
6.0
D
T491D686(1)016A(2)
ESR Ω
@ +25°C
100 kHz
Max
1.8
1.8
2.4
6.0
8.0
0.8
0.7
1.6
1.8
1.8
0.8
0.7
1.2
2.2
1.0
0.8
0.7
1.2
1.8
3.0
0.7
1.2
0.7
0.7
0.7
0.9
0.7
0.5
0.5
0.7
0.5
0.5
0.5
0.2
0.5
10.0
8.0
6.0
15.0
25.0
3.5
5.0
2.4
3.5
4.0
5.0
1.9
2.5
3.5
1.8
1.8
2.8
7.0
8.0
1.8
1.8
2.5
3.5
0.8
1.6
3.0
2.2
0.8
1.2
3.0
0.8
0.7
1.2
0.7
0.7
DC DC DF %
Leakage
Leakage
@ +25ºC
120 Hz
μA @ 25ºC
Max
Max
16 Volt Rating at +85ºC (10 Volt Rating at +125ºC)
T491X107(1)016A(2)
16.0
8.0
100.0100.0 X
†100.0
V
T491V107(1)016A(2)
16.0
12.0
16.0
8.0
#100.0
D
T491D107(1)016A(2)
X
T491X157(1)016A(2)
24.0
8.0
#150.0
24.0
12.0
#150.0
D
T491D157(1)016A(2)
X
T491X227(1)016A(2)
35.2
10.0
#220.0
35.2
7.2
#220.0
E
T491E227(1)016A(2)
20 Volt Rating at +85ºC (13 Volt Rating at + 125ºC)
0.1
4.0
0.47
R
T491R474(1)020A(2)
A
T491A684(1)020A(2)
0.5
4.0
0.68
A
T491A105(1)020A(2)
0.5
4.0
1.0
0.5
6.0
1.0
S
T491S105(1)020A(2)
0.5
6.0
#1.0
R
T491R105(1)020A(2)
A
T491A155(1)020A(2)
0.5
6.0
1.5
0.5
6.0
1.5
S
T491S155(1)020A(2)
0.5
6.0
2.2
B
T491B225(1)020A(2)
A
T491A225(1)020A(2)
0.5
6.0
2.2
0.7
6.0
3.3
B
T491B335(1)020A(2)
A
T491A335(1)020A(2)
0.7
6.0
#3.3
0.7
6.0
3.3
T
T491T335(1)020A(2)
1.0
6.0
4.7
C
T491C475(1)020A(2)
1.0
6.0
4.7
B
T491B475(1)020A(2)
A
T491A475(1)020A(2)
1.0
6.0
#4.7
1.4
6.0
6.8
C
T491C685(1)020A(2)
1.4
6.0
6.8
U
T491U685(1)020A(2)
1.4
6.0
#6.8
B
T491B685(1)020A(2)
A
T491A685M020A(2)
1.4
8.0
#6.8
2.0
6.0
10.0
C
T491C106(1)020A(2)
2.0
6.0
10.0
U
T491U106(1)020A(2)
2.0
6.0
#10.0
B
T491B106(1)020A(2)
3.0
6.0
15.0
D
T491D156(1)020A(2)
3.0
6.0
15.0
C
T491C156(1)020A(2)
4.4
6.0
22.0
D
T491D226(1)020A(2)
4.4
6.0
22.0
V
T491V226(1)020A(2)
4.4
6.0
#22.0
C
T491C226(1)020A(2)
6.6
6.0
33.0
D
T491D336(1)020A(2)
6.6
6.0
#33.0
C
T491C336M020A(2)
†33.0
V
T491V336(1)020A(2)
6.6
8.0
9.4
10.0
47.0
C
T491C476M020A(2)
9.4
6.0
47.0
D
T491D476(1)020A(2)
X
T491X686(1)020A(2)
13.6
6.0
68.0
13.6
8.0
#68.0
D
T491D686(1)020A(2)
X
T491X107(1)020A(2)
20.0
8.0
#100.0
20.0
8.0
#100.0
E
T491E107(1)020A(2)
X
T491X157(1)020A(2)
30.0
10.0
#150.0
25 Volt Rating at +85ºC (17 Volt Rating at +125ºC)
A
T491A334(1)025A(2)
0.5
4.0
0.33
A
T491A474(1)025A(2)
0.5
4.0
0.47
A
T491A684(1)025A(2)
0.5
4.0
0.68
0.5
4.0
1.0
B
T491B105(1)025A(2)
A
T491A105(1)025A(2)
0.5
4.0
1.0
0.5
6.0
1.5
B
T491B155(1)025A(2)
A
T491A155(1)025A(2)
0.5
6.0
1.5
0.6
6.0
2.2
C
T491C225(1)025A(2)
0.6
6.0
2.2
B
T491B225(1)025A(2)
0.9
6.0
3.3
C
T491C335(1)025A(2)
0.9
6.0
3.3
B
T491B335(1)025A(2)
1.2
6.0
4.7
C
T491C475(1)025A(2)
1.2
6.0
#4.7
B
T491B475(1)025A(2)
A
T491A475M025A(2)
1.2
8.0
#4.7
1.7
6.0
6.8
C
T491C685(1)025A(2)
1.7
8.0
6.8
B
T491B685(1)025A(2)
2.5
6.0
10.0
D
T491D106(1)025A(2)
2.5
6.0
10.0
C
T491C106(1)025A(2)
3.8
6.0
15.0
D
T491D156(1)025A(2)
3.8
6.0
#15.0
C
T491C156(1)025A(2)
5.5
6.0
22.0
D
T491D226(1)025A(2)
5.5
6.0
22.0
C
T491C226(1)025A(2)
5.5
6.0
22.0
V
T491V226(1)025A(2)
X
T491X336(1)025A(2)
8.3
6.0
33.0
8.3
6.0
#33.0
D
T491D336(1)025A(2)
8.3
10.0
#33.0
C
T491C336M025A(2)
X
T491X476(1)025A(2)
11.8
6.0
#47.0
†47.0
D
T491D476(1)025A(2)
11.8
10.0
†68.0
X
T491X686M025A(2)
17.0
8.0
†68.0
D
T491D686M025A(2)
17.0
10.0
X
T491X107M025A(2)
25.0
8.0
100.0
CapaciCapaciCaseCase
tancetance
Size Size
µF μF
KEMET
KEMET
Number
Part Part
Number
(1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance.
(2) To complete KEMET Part Number, insert T, H, G, or S lead material designation as shown on page 15.
*Extended Values
**6 Volt product equivalent to 6.3 volt product.
#Maximum Capacitance Change @ 125ºC=+15%.
†Maximum Capacitance Change @ 125ºC=+20%.
Higher voltage ratings and tighter tolerance product may be substituted within the same
size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating.
18
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
ESR Ω
@ +25°C
@ +25°C
100 kHz
100 kHz
Max Max
0.7
0.7
0.7
0.5
0.7
0.5
0.9
35.0
12.0
9.0
18.0
20.0
6.5
15.0
3.5
7.0
3.0
4.5
5.0
2.4
3.0
4.0
1.9
1.9
2.5
6.0
1.8
1.8
2.1
1.0
1.7
0.8
0.7
1.2
0.8
1.2
0.7
0.9
0.7
0.7
0.7
0.5
0.5
0.5
15.0
14.0
10.0
5.0
8.0
5.0
7.5
3.5
4.5
2.5
3.5
2.4
1.5
6.0
1.9
2.8
1.0
1.5
1.0
1.5
0.8
1.4
0.7
0.7
0.7
1.2
0.7
0.7
0.7
0.7
0.3
SOLID TANTALUM CHIP CAPACITORS
T491 RATINGS & PART NUMBER REFERENCE
Capacitance
µF
Case
Size
KEMET
Part Number
DC
Leakage
μA @ 25ºC
Max
DF %
@ +25ºC
120 Hz
Max
ESR Ω
@ +25°C
100 kHz
Max
35 Volt Rating at +85ºC (23 Volt Rating at +125ºC)
A
T491A104(1)035A(2)
0.5
4.0
A
T491A154(1)035A(2)
0.5
4.0
A
T491A224(1)035A(2)
0.5
4.0
A
T491A334(1)035A(2)
0.5
4.0
0.5
4.0
B
T491B474(1)035A(2)
A
T491A474(1)035A(2)
0.5
4.0
0.5
4.0
B
T491B684(1)035A(2)
A
T491A684(1)035A(2)
0.5
4.0
0.5
4.0
B
T491B105(1)035A(2)
A
T491A105(1)035A(2)
0.5
4.0
0.5
6.0
C
T491C155(1)035A(2)
0.5
6.0
B
T491B155(1)035A(2)
0.8
6.0
C
T491C225(1)035A(2)
0.8
6.0
B
T491B225(1)035A(2)
1.2
6.0
C
T491C335(1)035A(2)
1.2
6.0
B
T491B335(1)035A(2)
1.7
6.0
D
T491D475(1)035A(2)
1.7
6.0
C
T491C475(1)035A(2)
1.6
6.0
B
T491B475(1)035A(2)
2.4
6.0
D
T491D685(1)035A(2)
2.4
6.0
C
T491C685(1)035A(2)
3.5
6.0
D
T491D106(1)035A(2)
3.5
6.0
C
T491C106M035A(2)
3.5
6.0
V
T491V106(1)035A(2)
X
T491X156(1)035A(2)
5.3
6.0
5.3
6.0
D
T491D156(1)035A(2)
X
T491X226(1)035A(2)
7.7
6.0
7.7
6.0
D
T491D226(1)035A(2)
X
T491X336(1)035A(2)
11.6
6.0
X
T491X476(1)035A(2)
16.5
8.0
E
T491E476(1)035A(2)
16.5
10.0
50 Volt Rating at +85ºC (33 Volt Rating at + 125ºC)
A
T491A104(1)050A(2)
0.5
4.0
0.5
4.0
B
T491B154(1)050A(2)
A
T491A154(1)050A(2)
0.5
4.0
0.5
4.0
B
T491B224(1)050A(2)
0.5
4.0
B
T491B334(1)050A(2)
0.5
4.0
C
T491C474(1)050A(2)
0.5
4.0
B
T491B474(1)050A(2)
0.5
4.0
C
T491C684(1)050A(2)
0.5
4.0
B
T491B684(1)050A(2)
0.5
4.0
C
T491C105(1)050A(2)
0.5
4.0
V
T491V105(1)050A(2)
0.8
6.0
D
T491D155(1)050A(2)
0.8
6.0
C
T491C155(1)050A(2)
1.1
6.0
D
T491D225(1)050A(2)
1.1
6.0
C
T491C225(1)050A(2)
1.7
6.0
D
T491D335(1)050A(2)
2.4
6.0
D
T491D475(1)050A(2)
X
T491X685(1)050A(2)
3.5
6.0
3.4
6.0
D
T491D685(1)050A(2)
X
T491X106M050A(2)
5.0
6.0
5.0
6.0
D
T491D106(1)050A(2)
X
T491X156(1)050A(2)
7.5
8.0
0.10
0.15
0.22
0.33
0.47
0.47
0.68
0.68
1.0
1.0
1.5
1.5
2.2
2.2
3.3
#3.3
4.7
4.7
4.7
6.8
6.8
10.0
#10.0
#10.0
15.0
15.0
22.0
#22.0
#33.0
†47.0
#47.0
0.10
0.15
0.15
0.22
0.33
0.47
0.47
0.68
0.68
1.0
1.0
1.5
1.5
2.2
2.2
3.3
4.7
6.8
#6.8
#10.0
#10.0
†15.0
20.0
19.0
18.0
15.0
8.0
12.0
6.5
8.0
5.0
7.5
4.5
5.0
3.5
4.0
2.5
3.5
1.5
2.2
3.1
1.3
1.8
1.0
1.6
2.0
0.9
0.8
0.7
0.7
0.6
0.6
0.5
CONSTRUCTION
Silver Adhesive
Negative
Termination*
Washer
Molded
Case
Polarity
Stripe (+)
Polarity
Bevel (+)
Tantalum
Wire
Tantalum
Weld
(Ta2O5)
Mn02 Coat
(First Layer)
Carbon
(Second Layer)
Positive
Termination*
*100% tin
Silver Paint
(Third Layer)
CAPACITOR MARKINGS
T491 Series — All Case Sizes
Polarity
Indicator (+)
20.0
16.0
15.0
14.0
10.0
8.0
9.0
7.0
8.0
5.5
6.0
3.5
4.5
2.5
3.0
2.0
1.4
1.0
1.0
0.7
0.8
0.7
226
20K
542
Rated
Voltage
Picofarad
Code
KEMET
I. D. Symbol
Print Week Code:
1st Digit = Year
2nd & 3rd Digits = Week
"542" = The 42nd week of 2005
(1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance.
(2) To complete KEMET Part Number, insert T, H, G, or S lead material designation as shown on page 15.
*Extended Values
**6 Volt product equivalent to 6.3 volt product.
#Maximum Capacitance Change @ 125ºC=+15%.
†Maximum Capacitance Change @ 125ºC=+20%.
Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’s option.
Voltage substitutions will be marked with the higher voltage rating.
CAPACITOR ALTERNATE MARKINGS
A Case Size
Polarity
Indicator
(+)
KEMET
MnO2
Lot
Code
Voltage
Voltage
Picofarad
Code
Date Code - Year
S = 2004
V = 2007 1 = January
Date
Code
107
6V
Picofarad
Code
Date
Code
Polarity
Indicator
(+)
KEMET
MnO2
K
A 155
V5 49
Lot
Code
Voltage
C,D,X Case Size
Polarity
Indicator
(+)
KEMET
MnO2
156
K 10V
V5 49
K
Date
Code
B Case Size
A Case Size
Voltage Code
G
4
J
6.3
A
10
C
16
D
20
E
25
V
35
T
50
V5
Date Code - Month
4 = April 7 = July
49
Lot Code
10 = October
T = 2005
W = 2008 2 = February 5 = May
8 = August
U = 2006
X = 2009 3 = March
9 = September 12 = December
6 = June
Picofarad
Code
11 = November
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
19
Solid Tantalum Surface Mount
T491 SERIES—Precision Molded Chip
SOLID TANTALUM CHIP CAPACITORS
T492 SERIES – Style CWR11 Per Mil-PRF-55365/8
Established reliability military version of
Industrial Grade T491 series
Taped and reeled per EIA 481-1
Precision-molded, laser-marked case
Symmetrical, compliant terminations
100% Surge Current test available for all case sizes
Operating Temperature: -55˚C to + 125˚C
•
•
•
•
•
•
Qualified to MIL-PRF-55365/8, Style CWR11:
– Termination Options B, C, H, K
– Weibull failure rate codes B, C and D
– Capacitance values and voltages as shown
in following part number table. (Contact
KEMET for latest qualification status)
•
T492 OUTLINE DRAWINGS
CATHODE (-) END
VIEW
SIDE VIEW
ANODE (+) END
VIEW
B
W
BOTTOM VIEW
B
H
E
K
T
S
X
F
P
S
G
R
A
L
Termination
cutout at
KEMET’s
Option,
either end
DIMENSIONS – Millimeters (Inches)
Case Size
Component
R
(Ref)
T
(Ref)
A
(Min)
0.4
(.016)
0.10 ± 0.10
0.4
0.4
(.004 ± .004) (.016) (.016)
0.13
(.005)
1.4
1.1
1.3
(.055) (.043) (.051)
0.8
(.031)
0.4
(.016)
0.10 ± 0.10
0.5
1.0
(.004 ± .004) (.020) (.039)
0.13
(.005)
2.1
1.8
2.2
(.083) (.071) (.087)
2.2
(.087)
1.3
(.051)
0.5
(.020)
0.10 ± 0.10
0.9
1.0
(.004 ± .004) (.035) (.039)
0.13
(.005)
3.1
2.8
2.4
(.122) (.110) (.094)
2.4
(.094)
1.3
(.051)
0.5
(.020)
0.10 ± 0.10
0.9
1.0
(.004 ± .004) (.035) (.039)
0.13
(.005)
3.8
3.5
3.5
(.150) (.138) (.138)
K* ± 0.20 F* ± 0.1
± (.008)
± (.004)
± (.012)
B ± 0.15
(Ref) ± .006
1.6 ± 0.2
(.063 ± .008)
0.9
(.035)
1.2
(.047)
0.8
(.031)
2.8 ± 0.2
(.110 ± .008)
1.9 ± 0.2
(.075 ± .008)
1.1
(.043)
2.2
(.087)
6.0 ± 0.3
.236 ± .012
3.2 ± 0.3
(.126 ± .012)
2.5 ± 0.3
(.098 ± .012)
1.4
(.055)
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
2.8 ± 0.3
(.110 ± .012)
1.5
(.059)
KEMET
EIA
L*
W*
H*
A
3216-18
3.2 ± 0.2
(.126 ± .008)
1.6 ± 0.2
(.063 ± .008)
B
3528-21
3.5 ± 0.2
(.138 ± .008)
C
6032-28
D
7343-31
S* ± 0.3
X
(Ref)
P
(Ref)
G
(Ref)
E
(Ref)
Notes: 1. Metric dimensions govern
2. (Ref) Dimensions provided for reference only
* Mil-PRF-55365/8 Specified Dimensions
ORDERING INFORMATION — MIL-PRF-55365 Part Number
CWR11
M
H
105
K
B
A
Style
Surge Current Option
Capacitors, Chip, Fixed Tantalum
Established Reliability, (encapsulated)
A = +25°C after Weibull
B = -55°C +85°C after Weibull
C = -55°, & +85°C before Weibull
Z = None
Voltage
D = 6V J = 20V
F = 10V K = 25V
H = 15V M = 35V
Failure Rate Symbol
Weibull:
B (0.1%/1000 hrs.)
C (0.01%/1000 hrs.)
D (0.001%/1000 hrs.)
#Exponential: M (1.0%/1000 hrs.)
# Inactive for
P (0.1%/1000 hrs.)
New Design
R (0.01%/1000 hrs.)
S (0.001%/1000 hrs.)
Termination Finish Code
B = Gold Plated
H = Solder Plated
C = Hot Solder Dipped
K = Solder Fused
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
Capacitance Tolerances
M = ±10%; K = ±10%; J = ±5%
T492 SERIES ORDERING INFORMATION — KEMET Part Number
T
492
B
105
K
035
B
Tantalum
Series
Surge Current Option
Case Size
Lead Material
A, B, C, D
B = Gold
C = Hot Solder Dip
H or S = Solder Plated
K = Solder Fused
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
Capacitance Tolerances
Failure Rate Symbol
M = ±10%; K = ±10%; J = ±5%
As shown
4250
4250 = +25°C after Weibull
4251 = -55° +85°C after Weibull
4252 = -55, & +85°C before Weibull
T492 - Precision Molded, Style CWR11
Voltage
S
Weibull: B (0.1%/1000 hrs.); C (0.01%/1000 hrs.); D (0.001%/1000 hrs.)
# Exponential: M (1.0%/1000 hrs.); P (0.1%/1000 hrs.), R (0.01%/1000 hrs.);
S (0.001%/1000 hrs.)
# Exponential not recommended for new design
* Part Number Example: T492B105K035BS (14 digits - no spaces)
* See www.kemet.com for Pb Free transition.
# Note on Failure Rates: Exponential failure rate levels M, P, R and S are inactive for new design per Mil-C-55365.
Parts qualified to Weibull failure rate levels are substitutable for exponential failure rate levels.
20
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
T492 (CWR11) RATINGS AND PART NUMBER REFERENCE
CapaciCapaci- Case
tance
tance Size
Case
μF
F
Size
1.5
A
2.2
A
3.3
A
4.7
B
CapaciCase
6.8
B
tance
Size
10.0
B
μF
15.0
C
22.0
C
47.0
D
1.0
1.5
2.2
3.3
4.7
6.8
15.0
33.0
A
A
A
B
B
B
C
D
0.7
1.0
1.5
2.2
3.3
4.7
10.0
22.0
A
A
A
B
B
B
C
D
0.5
0.7
1.0
1.5
2.2
3.3
4.7
6.8
15.0
A
A
A
B
B
B
C
C
D
0.3
0.5
0.7
1.0
1.5
2.2
3.3
4.7
6.8
10.0
A
A
B
B
B
C
C
C
D
D
0.1
0.2
0.2
0.3
0.5
0.7
1.0
1.5
2.2
3.3
4.7
A
A
A
A
B
B
B
C
C
C
D
ESR
DC DCL DFDF %
ESR
:
:@
Leakage
+25⬚C
μA @% @@
+25°C @ +25⬚C
+25°C
A @ +25⬚C
Hz Hz 100kHz
+25°C 120120
100kHz
Max
Max
Max
Max
Max
Max
6 Volt Rating at +85°C (4 Volt Rating at +125°C)
T492A155(1)006(2)(3)(4)
CWR11D(6)155(1)(2)(5)
0.5
6.0
8.0
T492A225(1)006(2)(3)(4)
CWR11D(6)225(1)(2)(5)
0.5
6.0
8.0
T492A335(1)006(2)(3)(4)
CWR11D(6)335(1)(2)(5)
0.5
6.0
8.0
ESR
DCL
DF %
T492B475(1)006(2)(3)(4)
CWR11D(6)475(1)(2)(5)
0.5
6.0
5.5
μA @ @ +25°C
KEMET
Mil-C-55365/8
T492B685(1)006(2)(3)(4)
CWR11D(6)685(1)(2)(5)
0.5
6.0
4.5
+25°C 120 Hz
Part Number
Part Number
T492B106(1)006(2)(3)(4)
CWR11D(6)106(1)(2)(5)
0.6
6.0
3.5
Max
Max
T492C156(1)006(2)(3)(4)
CWR11D(6)156(1)(2)(5)
0.9
6.0
3.0
T492C226(1)006(2)(3)(4)
CWR11D(6)226(1)(2)(5)
1.4
6.0
2.2
T492D476(1)006(2)(3)(4)
CWR11D(6)476(1)(2)(5)
2.8
6.0
1.1
10 Volt Rating at +85°C (7 Volt Rating at 125°C)
T492A105(1)010(2)(3)(4)
CWR11F(6)105(1)(2)(5)
0.5
4.0
10.0
T492A155(1)010(2)(3)(4)
CWR11F(6)155(1)(2)(5)
0.5
6.0
8.0
T492A225(1)010(2)(3)(4)
CWR11F(6)225(1)(2)(5)
0.5
6.0
8.0
T492B335(1)010(2)(3)(4)
CWR11F(6)335(1)(2)(5)
0.5
6.0
5.5
T492B475(1)010(2)(3)(4)
CWR11F(6)475(1)(2)(5)
0.5
6.0
4.5
T492B685(1)010(2)(3)(4)
CWR11F(6)685(1)(2)(5)
0.7
6.0
3.5
T492C156(1)010(2)(3)(4)
CWR11F(6)156(1)(2)(5)
1.5
6.0
2.5
T492D336(1)010(2)(3)(4)
CWR11F(6)336(1)(2)(5)
3.3
6.0
1.1
15 Volt Rating at +85°C (10 Volt Rating at +125°C)
T492A684(1)015(2)(3)(4)
CWR11H(6)684(1)(2)(5)
0.5
4.0
12.0
T492A105(1)015(2)(3)(4)
CWR11H(6)105(1)(2)(5)
0.5
4.0
10.0
T492A155(1)015(2)(3)(4)
CWR11H(6)155(1)(2)(5)
0.5
6.0
8.0
T492B225(1)015(2)(3)(4)
CWR11H(6)225(1)(2)(5)
0.5
6.0
5.5
T492B335(1)015(2)(3)(4)
CWR11H(6)335(1)(2)(5)
0.5
6.0
5.0
T492B475(1)015(2)(3)(4)
CWR11H(6)475(1)(2)(5)
0.7
6.0
4.0
T492C106(1)015(2)(3)(4)
CWR11H(6)106(1)(2)(5)
1.6
6.0
2.5
T492D226(1)015(2)(3)(4)
CWR11H(6)226(1)(2)(5)
3.3
6.0
1.1
20 Volt Rating at +85°C (13 Volt Rating at +125°C)
T492A474(1)020(2)(3)(4)
CWR11J(6)474(1)(2)(5)
0.5
4.0
14.0
T492A684(1)020(2)(3)(4)
CWR11J(6)684(1)(2)(5)
0.5
4.0
12.0
T492A105(1)020(2)(3)(4)
CWR11J(6)105(1)(2)(5)
0.5
4.0
10.0
T492B155(1)020(2)(3)(4)
CWR11J(6)155(1)(2)(5)
0.5
6.0
6.0
T492B225(1)020(2)(3)(4)
CWR11J(6)225(1)(2)(5)
0.5
6.0
5.0
T492B335(1)020(2)(3)(4)
CWR11J(6)335(1)(2)(5)
0.7
6.0
4.0
T492C475(1)020(2)(3)(4)
CWR11J(6)475(1)(2)(5)
1.0
6.0
3.0
T492C685(1)020(2)(3)(4)
CWR11J(6)685(1)(2)(5)
1.4
6.0
2.4
T492D156(1)020(2)(3)(4)
CWR11J(6)156(1)(2)(5)
3.0
6.0
1.1
25 Volt Rating at +85°C (17 Volt Rating at +125°C)
T492A334(1)025(2)(3)(4)
CWR11K(6)334(1)(2)(5)
0.5
4.0
15.0
T492A474(1)025(2)(3)(4)
CWR11K(6)474(1)(2)(5)
0.5
4.0
14.0
T492B684(1)025(2)(3)(4)
CWR11K(6)684(1)(2)(5)
0.5
4.0
7.5
T492B105(1)025(2)(3)(4)
CWR11K(6)105(1)(2)(5)
0.5
4.0
6.5
T492B155(1)025(2)(3)(4)
CWR11K(6)155(1)(2)(5)
0.5
6.0
6.5
T492C225(1)025(2)(3)(4)
CWR11K(6)225(1)(2)(5)
0.6
6.0
3.5
T492C335(1)025(2)(3)(4)
CWR11K(6)335(1)(2)(5)
0.9
6.0
3.5
T492C475(1)025(2)(3)(4)
CWR11K(6)475(1)(2)(5)
1.2
6.0
2.5
T492D685(1)025(2)(3)(4)
CWR11K(6)685(1)(2)(5)
1.7
6.0
1.4
T492D106(1)025(2)(3)(4)
CWR11K(6)106(1)(2)(5)
2.5
6.0
1.2
35 Volt Rating at +85°C (23 Volt Rating at +125°C)
T492A104(1)035(2)(3)(4)
CWR11M(6)104(1)(2)(5)
0.5
4.0
24.0
T492A154(1)035(2)(3)(4)
CWR11M(6)154(1)(2)(5)
0.5
4.0
21.0
T492A224(1)035(2)(3)(4)
CWR11M(6)224(1)(2)(5)
0.5
4.0
18.0
T492A334(1)035(2)(3)(4)
CWR11M(6)334(1)(2)(5)
0.5
4.0
15.0
T492B474(1)035(2)(3)(4)
CWR11M(6)474(1)(2)(5)
0.5
4.0
10.0
T492B684(1)035(2)(3)(4)
CWR11M(6)684(1)(2)(5)
0.5
4.0
8.0
T492B105(1)035(2)(3)(4)
CWR11M(6)105(1)(2)(5)
0.5
4.0
6.5
T492C155(1)035(2)(3)(4)
CWR11M(6)155(1)(2)(5)
0.5
6.0
4.5
T492C225(1)035(2)(3)(4)
CWR11M(6)225(1)(2)(5)
0.8
6.0
3.5
T492C335(1)035(2)(3)(4)
CWR11M(6)335(1)(2)(5)
1.2
6.0
2.5
T492D475(1)035(2)(3)(4)
CWR11M(6)475(1)(2)(5)
1.7
6.0
1.5
KEMET
KEMET
Part
Number
Part Number
Mil-C-55365/8
Mil-C-55365/8
Part Number
Part Number
PACKAGING
Note: T492 Packaging
• No c-spec required for 7” reel packaging
• C-7280 required for 13” reel packaging
• Standard reel packaging is not mandatory
• Bulk packaging also available using C-7610
See page 91 for tape and reel quantities.
CONSTRUCTION
Silver Adhesive
Negative
Termination*
Washer
Molded
Case
Polarity
Stripe (+)
Polarity
Bevel (+)
Tantalum
Wire
Tantalum
Weld
(Ta2O5)
Mn02 Coat
(First Layer)
Carbon
(Second Layer)
Positive
Termination
Silver Paint
(Third Layer)
CAPACITOR MARKINGS
T492 Series — All Case Sizes
Jan
Brand
Rated
Voltage
J
156
20K
513
Sn/Pb (5% Pb minimum)
Polarity
Indicator (+)
Picofarad
Code
KEMET
I. D. Symbol
Print Week Code:
1st Digit = Year
2nd & 3rd Digits = Week
"513" = The 13th week of 2005
Note on Failure Rates:
Exponential failure rate
levels M, P, R and S are
inactive for new design
per MIL-C-55365. Parts
qualified to Weibull failure
rate levels are substitutable
for exponential failure
rate levels.
Note: ESR limits are per
Mil-C-55365/8
(1) To complete KEMET/CWR part number, insert M for ±20%, K for ±10% or J for ±5% tolerance.
(2) To complete KEMET/CWR part number, insert Failure Rate Symbol Weibull: B (0.1%/1000 Hrs.), C (0.01%/1000Hrs or D (0.001%/1000 Hrs.),
Exponential: M (1.0%/1000 hrs.), P (0.1%/1000 hrs.), R (0.01%/1000 hrs.) or S (0.001%/1000 hrs.)
(3) To complete KEMET part number, insert Termination Finish Designation B = Gold; C = Hot Solder Dipped; S = Solder Plated; K = Solder Fused.
(4) To complete KEMET part number, insert 4250 = +25°C after Weibull; 4251 = -55° + 85°C after Weibull; or 4252 = -55, & +85°C before Weibull Surge Current Option.
(5) To complete CWR part number, insert A = +25°C after Weibull; B = -55° + 85°C after Weibull; C = -55°, & + 85°C before Weibull or Z = None for Surge Current Option.
(6) To complete CWR part numbers, insert B = Gold; C = Hot Solder Dipped; H or S = Solder Plated; K = Solder Fused
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
21
Solid Tantalum Surface Mount
T492 SERIES—Style CWR11 Per Mil-PRF-55365/8
SOLID TANTALUM CHIP CAPACITORS
T493 SERIES—Military COTS
Features
FEATURES
• Standard Cases Sizes A - X per EIA535BAAC
• Termination Finishes offered per MIL-PRF-55365: Gold Plated, Hot Solder Dipped, Solder Plated,
Solder Fused, 100% Tin
• Weibull Grading Available: B (0.1%/1000hrs) and C (0.01%/1000hrs)
• Surge Current Testing Available per MIL-PRF-55365: 10 cycles @ +25°C; 10 cycles @ -55°C and +85°C
• Standard and Low ESR Options
• Operating Temperature Range: -55°C to +125°C
• Capacitance: 0.1 to 330µF
• Voltage: 4 to 50 Volts
OUTLINE
Outline DRAWING
Drawing
CATHODE (-) END
VIEW
SIDE VIEW
ANODE (+) END
VIEW
B
W
BOTTOM VIEW
B
H
E
K
F
T
X
S
G
S
A
L
Termination Notch
at KEMET’s Option,
Either End
DIMENSIONS(INCHES)
Dimensions MILLIMETERS
- Millimeters (Inches)
Case
Size
Case
Size
KEMET
EIA
KEMET
EIA/IECQ
A
A
B
B
3216-18
3216-18
C
C
D
D
X
X
E
L
L
3.2 ± 0.2
(.126
3.2 ±± .008)
0.2
W
H
W
K ±0.20
H
1.6 ± 0.2
1.6 ± 0.2
0.9
(.0631.6
± .008)
(.035)
± 0.2(.063 ± .008)
1.6 ± 0.2
3528-21
3.5 ± 0.2
2.8 ± 0.2
1.9 ± 0.1
1.1
(.126
± .008) (.063
± .008)
(.063 ± .008)
(.138 ± .008) (.110 ± .008) (.075 ± .008)
(.043)
3.5 ± 0.2
2.8 ± 0.2
1.9 ± 0.2
6032-28
6.0 ± 0.3
3.2 ± 0.3
2.5 ± 0.3
1.4
(.138
± .008) (.110 ± .008) (.075 ± .008)
(.236 ± .012) (.126 ± .12) .098 ± .012)
(.055)
6032-28
6.0
0.3
± 0.3 2.8 ± 0.3
2.5 ± 0.3
7343-31
7.3 ±
± 0.3
4.33.2
± 0.3
1.5
(.236
.012) (.169
(.126
± .012)
(.287 ±
± .012)
± .012)
(.110 (.098
± .012) ± .012)
(.059)
7343-31
7.3
0.3
± 0.3 4.0 ± 0.3
2.8 ± 0.3
7343-43
7.3 ±
± 0.3
4.34.3
± 0.3
2.3
(.287 ± .012)
± .012)
(.157 (.110
± .012) ± .012)
(.091)
(.287
.012) (.169
(.169
± .012)
7260-38
7.3 ±
± 0.3
6.04.3
± 0.3
2.3
7343-43
7.3
0.3
± 0.3 3.6 ± 0.2
4.0 ± 0.3
(.287 ±
± .012)
(.142 (.157
± .008) ± .012)
(.091)
(.287
.012) (.236±
(.169.012)
± .012)
3528-21
Notes:
B ±0.15±0.3
B ±0.15 P (Ref) R (Ref)
F±0.20
±0.1
S ±0.3 ±0.1
X (Ref)
(Ref) ±(.006)
K ±(.008) F ±(.004)
S ±(.012) (Ref) ±.006
X(Ref)
1.2
0.8
(.047) 0.9(.031)1.2
2.2
(.035)
(.087)
1.1
2.2
(.043)
(.087)
1.4
2.4
(.055)
(.094)
1.5
2.4
(.094)
(.059)
4.1
2.3
(.161)
(.091)
0.4
(.016)0.8
0.10 ± 0.10
(.004 ± .004)
0.4
0.8
0.10
(.047) 0.4(.031) 0.10 ±(.016)
(.031)
(.016)
(.004 ± .004)
2.2
1.3
(.087)
(.051)
1.3 2.2
(.087)
(.051)
1.3 2.4
(.051)
(.094)
1.3 2.4
(.051)
(.094)
0.8
0.4
0.5
0.10 ± 0.10
(.031) (.004 ±(.016)
(.020)
.004)
0.5
0.5 1.3
0.10 ± 0.10
(.051) (.004 ±(.020)
(.020)
.004)
1.30.10 ± 0.10
0.5
0.5
(.020)
.004)
(.051) (.004 ±(.020)
0.5 1.3
0.10 ± 0.10
0.5
(.020) (.051)
(.004 ±(.020)
.004)
0.4
0.4
(.016)
0.10 ±(.016)
0.10
0.5
(.004 ± 1.0
.004)
(.020)
(.039)
A (Min)
G (Ref)
1.4
(.055)
0.13
2.1
(.005)
(.083)
0.10 ± 0.10 0.13
0.9
1.0
3.1
(.004
± .004)
(.005)
(.0235)
(.039)
(.122)
0.10 0.13
0.90.10 ± 1.0
3.8
(.004 ±(.039)
.004) (.005)
(.0235)
(.150)
0.10
0.13
1.7
1.0± 0.10
3.8
(.067)
(.150)
(.004 ±(.039)
.004) (.005)
0.90.10 ± 1.0
3.8
0.10 0.13
(.035)
(.004 (.039)
± .004) (.150)
(.005)
1.1
(.043)
COMPONENT
ComponentMARKING
Marking
Rated
Voltage
22
+
336
20 K
515
315
1.3
1.4(.051)
1.1
1.3
1.8 (.055)2.2
(.043) (.051)
(.071)
2.1(.087)
1.8
2.2
2.8
2.4
(.083)
(.071)
(.087)
(.110)
(.094)
3.1 2.8
2.4
3.5
3.5
(.110)
(.138)(.122)
(.138) (.094)
3.8
3.5
3.5
3.5
3.5
(.138) (.138)
(.138) (.138)
(.150)
3.5
3.5
3.5 3.5
3.8
(.138)
(.138) (.138)
(.150) (.138)
1. Metric dimensions govern.
2. (ref) - Dimensions provided for reference only.
(+) KEMET
T493 COTS
E (Ref)
T(Ref) A(Min) G(ref) E(ref)
Polarity
Indicator
Picofarad Code
KEMET ID
Print Week Code
1st Digit = Year
2nd & 3rd Digit + Week
“315”==15th
15th week
Weekof
of 2005
2003
“515
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
Solid Tantalum Surface Mount
T493 SERIES—Military COTS
ORDERING INFORMATION
T
493
D
227 K
006
C
H
6120
Tantalum
ESR/Surge Designator
First 2 Numbers
61 = Surge - None
62 = Surge - 10 Cycles, +25°C
64 = Surge - 10 cycles, -55°C and +85°C
Series
T493 Military Commercial Off-The-Shelf
Case Size
A, B, C, D, X
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
Second 2 Numbers
10 = ESR - Standard
20 = ESR - Low
30 = ESR - Ultra-low
Capacitance Tolerances
Note:
Capacitance Picofarad Code
M = ±10%
K = ±10%
J = ±5% (For 5% tolerance contact KEMET sales rep.)
For order entry purposes the last 4-digits
of the part number will be entered in the
KEMET Customer Specification (C-Spec)Field.
Termination Finish
B - Gold plated
C - Hot solder dipped
H - Solder plated
K - Solder fused
T - 100% Tin
Voltage
As shown
Reliability Level
A = Non-ER; B = 0.1%/K hrs.; C = 0.01%/K hrs.
T493 RATINGS AND PART NUMBER REFERENCE
CapaciCapaci- Case
Case
tance
tance Size
Size
μF µF
2.2 2.2
3.3 3.3
4.7 4.7
6.8 6.8
6.8 6.8
10.010.0
10.010.0
15.015.0
15.015.0
22.022.0
22.022.0
22.022.0
33.033.0
33.033.0
33.033.0
47.047.0
47.047.0
68.068.0
68.068.0
68.068.0
#100.0
#100.0
100.0
100.0
100.0
100.0
#150.0
#150.0
150.0
150.0
220.0
220.0
330.0
330.0
330.0
330.0
A
A
A
A
B
A
B
A
B
A
B
C
A
B
C
B
C
B
C
D
*B
C
D
*C
D
D
D
X
A
A
A
A
B
A
B
A
B
A
B
C
A
B
C
B
C
B
C
D
B
C
D
C
D
D
D
X
1.5 1.5
2.2 2.2
3.3 3.3
4.7 4.7
4.7 4.7
6.8 6.8
6.8 6.8
10.010.0
10.010.0
15.015.0
15.015.0
15.015.0
22.022.0
22.022.0
22.022.0
A
A
A
A
B
A
B
A
B
A
B
C
A
B
C
A
A
A
A
B
A
B
A
B
A
B
C
A
B
C
KEMET
KEMET
PartPart
Number
Number
Std.
ESR
Std.
ESR Low
LowESR
ESR
DCL DCL DF %
DF %
Ohms
Ohms
Ohms
Ohms
μA @µA @@ +25ºC
@ +25ºC @+25°C
@+25°C @+25°C
@+25°C
25ºC 25ºC 120 120
Hz Hz
100100
kHzkHz 100
100kHz
kHz
Max Max MaxMax
Max
Max
Max
Max
4 4Volt
VoltRating
Ratingatat+85ºC
+85ºC(2.7
(2.7Volt
VoltRating
Ratingatat+125ºC)
+125ºC)
T493A225(1)004(2)(3)(4)(5)
0.5 0.5
6.0 6.0
8.08.0
T493A225(1)004(2)(3)(4)(5)
T493A335(1)004(2)(3)(4)(5)
0.5 0.5
6.0 6.0
8.08.0
T493A335(1)004(2)(3)(4)(5)
T493A475(1)004(2)(3)(4)(5)
0.5 0.5
6.0 6.0
8.08.0
T493A475(1)004(2)(3)(4)(5)
T493A685(1)004(2)(3)(4)(5)
0.5 0.5
6.0 6.0
6.06.0
T493A685(1)004(2)(3)(4)(5)
T493B685(1)004(2)(3)(4)(5)
0.5 0.5
6.0 6.0
5.55.5
T493B685(1)004(2)(3)(4)(5)
T493A106(1)004(2)(3)(4)(5)
0.5 0.5
6.0 6.0
6.06.0
T493A106(1)004(2)(3)(4)(5)
T493B106(1)004(2)(3)(4)(5)
0.5 0.5
6.0 6.0
3.53.5
T493B106(1)004(2)(3)(4)(5)
T493A156(1)004(2)(3)(4)(5)
0.6 0.6
6.0 6.0
4.04.0
T493A156(1)004(2)(3)(4)(5)
T493B156(1)004(2)(3)(4)(5)
0.6 0.6
6.0 6.0
3.53.5
T493B156(1)004(2)(3)(4)(5)
T493A226(1)004(2)(3)(4)(5)
0.9 0.9
6.0 6.0
4.04.0
T493A226(1)004(2)(3)(4)(5)
T493B226(1)004(2)(3)(4)(5)
0.9 0.9
6.0 6.0
3.53.5
T493B226(1)004(2)(3)(4)(5)
T493C226(1)004(2)(3)(4)(5)
0.9 0.9
6.0 6.0
1.81.8
T493C226(1)004(2)(3)(4)(5)
T493A336(1)004(2)(3)(4)(5)
1.3 1.3
6.0 6.0
4.04.0
T493A336(1)004(2)(3)(4)(5)
T493B336(1)004(2)(3)(4)(5)
1.3 1.3
6.0 6.0
3.53.5
T493B336(1)004(2)(3)(4)(5)
T493C336(1)004(2)(3)(4)(5)
1.3 1.3
6.0 6.0
1.81.8
T493C336(1)004(2)(3)(4)(5)
T493B476(1)004(2)(3)(4)(5)
1.9 1.9
6.0 6.0
3.03.0
T493B476(1)004(2)(3)(4)(5)
T493C476(1)004(2)(3)(4)(5)
1.9 1.9
6.0 6.0
1.81.8
T493C476(1)004(2)(3)(4)(5)
T493B686(1)004(2)(3)(4)(5)
2.7 2.7
6.0 6.0
3.53.5
T493B686(1)004(2)(3)(4)(5)
T493C686(1)004(2)(3)(4)(5)
2.7 2.7
6.0 6.0
1.61.6
T493C686(1)004(2)(3)(4)(5)
T493D686(1)004(2)(3)(4)(5)
2.7 2.7
6.0 6.0
0.80.8
T493D686(1)004(2)(3)(4)(5)
T493B107(1)004(2)(3)(4)(5)
4.0 4.0
8.0 8.0
1.01.0
T493B107(1)004(2)(3)(4)(5)
T493C107(1)004(2)(3)(4)(5)
4.0 4.0
8.0 8.0
1.21.2
T493C107(1)004(2)(3)(4)(5)
T493D107(1)004(2)(3)(4)(5)
4.0 4.0
8.0 8.0
0.80.8
T493D107(1)004(2)(3)(4)(5)
T493C157(1)004(2)(3)(4)(5)
6.0 6.0
8.0 8.0
1.21.2
T493C157(1)004(2)(3)(4)(5)
T493D157(1)004(2)(3)(4)(5)
T493D157(1)004(2)(3)(4)(5)
6.0 6.0
8.0 8.0
0.80.8
T493D227(1)004(2)(3)(4)(5)
T493D227(1)004(2)(3)(4)(5)
8.8 8.8
8.0 8.0
0.90.9
T493D337(1)004(2)(3)(4)(5)
T493D337(1)004(2)(3)(4)(5)
13.2 13.2
8.0 8.0
0.70.7
T493X337(1)004(2)(3)(4)(5)
T493X337(1)004(2)(3)(4)(5)
13.2 13.2
8.0 8.0
0.50.5
VoltRating
Ratingatat+85ºC
+85ºC(4(4Volt
VoltRating
Ratingatat+125ºC)
+125ºC)
6 6Volt
T493A155(1)006(2)(3)(4(5)
T493A155(1)006(2)(3)(4(5)
0.5 0.5
6.0 6.0
8.08.0
T493A225(1)006(2)(3)(4)(5)
T493A225(1)006(2)(3)(4)(5)
0.5 0.5
6.0 6.0
8.08.0
T493A335(1)006(2)(3)(4)(5)
T493A335(1)006(2)(3)(4)(5)
0.5 0.5
6.0 6.0
8.08.0
T493A475(1)006(2)(3)(4)(5)
T493A475(1)006(2)(3)(4)(5)
0.5 0.5
6.0 6.0
6.06.0
T493B475(1)006(2)(3)(4)(5)
T493B475(1)006(2)(3)(4)(5)
0.5 0.5
6.0 6.0
5.55.5
T493A685(1)006(2)(3)(4)(5)
T493A685(1)006(2)(3)(4)(5)
0.5 0.5
6.0 6.0
6.06.0
T493B685(1)006(2)(3)(4)(5)
T493B685(1)006(2)(3)(4)(5)
0.5 0.5
6.0 6.0
3.53.5
T493A106(1)006(2)(3)(4)(5)
T493A106(1)006(2)(3)(4)(5)
0.6 0.6
6.0 6.0
4.04.0
T493B106(1)006(2)(3)(4)(5)
T493B106(1)006(2)(3)(4)(5)
0.6 0.6
6.0 6.0
3.53.5
T493A156(1)006(2)(3)(4)(5)
T493A156(1)006(2)(3)(4)(5)
0.9 0.9
6.0 6.0
4.04.0
T493B156(1)006(2)(3)(4)(5)
T493B156(1)006(2)(3)(4)(5)
0.9 0.9
6.0 6.0
3.53.5
T493C156(1)006(2)(3)(4)(5)
T493C156(1)006(2)(3)(4)(5)
0.9 0.9
6.0 6.0
1.81.8
T493A226(1)006(2)(3)(4)(5)
T493A226(1)006(2)(3)(4)(5)
1.4 1.4
6.0 6.0
4.04.0
T493B226(1)006(2)(3)(4)(5)
T493B226(1)006(2)(3)(4)(5)
1.4 1.4
6.0 6.0
3.53.5
T493C226(1)006(2)(3)(4)(5)
T493C226(1)006(2)(3)(4)(5)
1.4 1.4
6.0 6.0
1.81.8
Ultra-Low
Ultra-Low
ESR,
ESR, Ohms
Ohms
@+25°C
@+25°C
100
100 kHz
kHz
Max
Max
6.0
6.0
4.0
4.0
3.5
3.5
3.0
3.0
2.0
2.0
2.0
2.0
1.2
1.2
1.5
1.5
1.2
1.2
1.5
1.5
0.6
0.6
0.5
0.5
3.0
3.0
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
2.0
2.0
0.25
0.25
0.2
0.2
0.7
0.7
0.2
0.2
0.2
0.2
0.3
0.3
0.15
0.15
0.7
0.7
0.15
0.15
0.2
0.2
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.50
0.50
N/A
N/A
N/A
N/A
0.25
0.25
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
6.0
6.0
6.0
6.0
6.0
6.0
3.5
3.5
3.5
3.5
2.0
2.0
1.2
1.2
2.0
2.0
1.0
1.0
1.5
1.5
0.7
0.7
0.6
0.6
3.0
3.0
0.6
0.6
0.5
0.5
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5%
tolerance,contact KEMET sales representative.
(2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level.
(3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch
minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 µ inch minimum Termination Finish or T for 100% Tin.
(4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10
cycles, -55°C & +85°C.
(5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option.
* Extended Values
#Maximum Capacitance Change @ 125°C = +15%
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300*
23
SOLID TANTALUM CHIP CAPACITORS
T493 SERIES—Military COTS
T493 RATINGS AND PART NUMBER REFERENCE
24
Capacitance
µF
Case
Size
33.0
33.0
47.0
47.0
47.0
68.0
68.0
68.0
#100.0
100.0
100.0
#150.0
150.0
#220.0
220.0
220.0
330.0
330.0
1.0
1.5
2.2
3.3
3.3
4.7
4.7
6.8
6.8
10.0
10.0
10.0
#15.0
15.0
15.0
22.0
22.0
33.0
33.0
33.0
47.0
47.0
68.0
68.0
68.0
#100.0
100.0
150.0
150.0
#220.0
220.0
330.0
B
C
B
C
D
B
C
D
B
C
D
C
D
C
D
X
D
X
A
A
A
A
B
A
B
A
B
A
B
C
A
B
C
B
C
B
C
D
C
D
C
D
X
C
D
D
X
D
X
X
0.68
1.0
1.5
2.2
3.3
3.3
4.7
4.7
#6.8
6.8
6.8
10.0
10.0
#15.0
15.0
#22.0
22.0
22.0
A
A
A
A
A
B
A
B
A
B
C
B
C
B
C
B
C
D
KEMET
Part Number
DCL
µA @
25ºC
Max
DF %
@ +25ºC
120 Hz
Max
Std. ESR
Ohms
@+25°C
100 kHz
Max
6 Volt Rating at +85ºC (4 Volt Rating at +125ºC) cont.
T493B336(1)006(2)(3)(4)(5)
2.0
6.0
3.0
T493C336(1)006(2)(3)(4)(5)
2.0
6.0
1.8
T493B476(1)006(2)(3)(4)(5)
2.9
6.0
3.5
T493C476(1)006(2)(3)(4)(5)
2.9
6.0
1.6
T493D476(1)006(2)(3)(4)(5)
2.9
6.0
0.8
T493B686(1)006(2)(3)(4)(5)
4.1
8.0
1.0
T493C686(1)006(2)(3)(4)(5)
4.1
6.0
1.2
T493D686(1)006(2)(3)(4)(5)
4.1
6.0
0.8
T493B107(1)006(2)(3)(4)(5)
6.3
15.0
10.0
T493C107(1)006(2)(3)(4)(5)
6.0
8.0
1.2
T493D107(1)006(2)(3)(4)(5)
6.0
8.0
0.8
T493C157(1)006(2)(3)(4)(5)
9.0
8.0
1.2
T493D157(1)006(2)(3)(4)(5)
9.0
8.0
0.7
T493C227(1)006(2)(3)(4)(5)
13.2
10.0
1.2
T493D227(1)006(2)(3)(4)(5)
13.2
8.0
0.7
T493X227(1)006(2)(3)(4)(5)
13.2
8.0
0.7
T493D337(1)006(2)(3)(4)(5)
19.8
8.0
0.5
T493X337(1)006(2)(3)(4)(5)
19.8
8.0
0.5
T493A105(1)010(2)(3)(4)(5)
0.5
4.0
10.0
T493A155(1)010(2)(3)(4)(5)
0.5
6.0
8.0
T493A225(1)010(2)(3)(4)(5)
0.5
6.0
8.0
T493A335(1)010(2)(3)(4)(5)
0.5
6.0
6.0
T493B335(1)010(2)(3)(4)(5)
0.5
6.0
5.5
T493A475(1)010(2)(3)(4)(5)
0.5
6.0
6.0
T493B475(1)010(2)(3)(4)(5)
0.5
6.0
3.5
T493A685(1)010(2)(3)(4)(5)
0.7
6.0
6.0
T493B685(1)010(2)(3)(4)(5)
0.7
6.0
3.5
T493A106(1)010(2)(3)(4)(5)
1.0
6.0
4.0
T493B106(1)010(2)(3)(4)(5)
1.0
6.0
3.5
T493C106(1)010(2)(3)(4)(5)
1.0
6.0
1.8
T493A156(1)010(2)(3)(4)(5)
1.5
8.0
6.0
T493B156(1)010(2)(3)(4)(5)
1.5
6.0
3.5
T493C156(1)010(2)(3)(4)(5)
1.5
6.0
1.8
T493B226(1)010(2)(3)(4)(5)
2.2
6.0
3.0
T493C226(1)010(2)(3)(4)(5)
2.2
6.0
1.8
T493B336(1)010(2)(3)(4)(5)
3.3
6.0
3.5
T493C336(1)010(2)(3)(4)(5)
3.3
6.0
1.6
T493D336(1)010(2)(3)(4)(5)
3.3
6.0
0.8
T493C476(1)010(2)(3)(4)(5)
4.7
6.0
1.2
T493D476(1)010(2)(3)(4)(5)
4.7
6.0
0.8
T493C686(1)010(2)(3)(4)(5)
6.8
6.0
1.2
T493D686(1)010(2)(3)(4)(5)
6.8
6.0
0.8
T493X686(1)010(2)(3)(4)(5)
5.4
4.0
0.5
T493C107(1)010(2)(3)(4)(5)
10.0
8.0
1.2
T493D107(1)010(2)(3)(4)(5)
10.0
8.0
0.7
T493D157(1)010(2)(3)(4)(5)
15.0
8.0
0.7
T493X157(1)010(2)(3)(4)(5)
15.0
8.0
0.7
T493D227(1)010(2)(3)(4)(5)
22.0
8.0
0.5
T493X227(1)010(2)(3)(4)(5)
22.0
8.0
0.5
T493X337(1)010(2)(3)(4)(5)
33.0
10.0
0.5
16 Volt Rating at +85ºC (10 Volt Rating at +125ºC)
T493A684(1)016(2)(3)(4)(5)
1.1
6.0
12.0
T493A105(1)016(2)(3)(4)(5)
0.5
4.0
10.0
T493A155(1)016(2)(3)(4)(5)
0.5
6.0
8.0
T493A225(1)016(2)(3)(4)(5)
0.5
6.0
6.0
T493A335(1)016(2)(3)(4)(5)
0.5
6.0
6.0
T493B335(1)016(2)(3)(4)(5)
0.5
6.0
3.5
T493A475(1)016(2)(3)(4)(5)
0.8
6.0
6.0
T493B475(1)016(2)(3)(4)(5)
0.8
6.0
3.5
T493A685(1)016(2)(3)(4)(5)
1.1
6.0
7.0
T493B685(1)016(2)(3)(4)(5)
1.1
6.0
3.5
T493C685(1)016(2)(3)(4)(5)
1.1
6.0
1.9
T493B106(1)016(2)(3)(4)(5)
1.6
6.0
3.5
T493C106(1)016(2)(3)(4)(5)
1.6
6.0
1.8
T493B156(1)016(2)(3)(4)(5)
2.4
6.0
3.0
T493C156(1)016(2)(3)(4)(5)
2.4
6.0
1.8
T493B226(1)016(2)(3)(4)(5)
3.5
6.0
2.2
T493C226(1)016(2)(3)(4)(5)
3.6
6.0
1.6
T493D226(1)016(2)(3)(4)(5)
3.6
6.0
0.8
Low ESR
Ohms
@+25°C
100 kHz
Max
Ultra-Low
ESR, Ohms
@+25°C
100 kHz
Max
0.6
0.3
2.0
0.25
0.22
0.65
0.2
0.2
8.0
0.3
0.15
0.3
0.15
0.3
0.1
0.15
0.15
0.1
6.0
6.0
6.0
4.0
3.5
3.0
1.5
3.0
1.2
1.8
0.8
0.6
4.0
0.7
0.5
0.7
0.4
2.0
0.3
0.3
0.3
0.2
0.3
0.2
0.15
0.3
0.1
0.1
0.2
0.2
0.1
0.1
N/A
N/A
N/A
0.25
N/A
N/A
N/A
0.18
0.70
0.15
N/A
0.20
N/A
0.23
0.10
0.07
0.10
0.07
N/A
N/A
N/A
N/A
N/A
N/A
1.3
N/A
0.90
N/A
0.75
N/A
3.2
N/A
0.48
N/A
0.29
N/A
N/A
N/A
N/A
0.08
0.23
0.09
0.15
N/A
0.08
0.08
0.09
0.08
0.05
0.05
8.0
6.0
6.0
4.0
3.5
2.0
3.0
1.5
3.0
1.2
0.8
0.8
0.6
0.8
0.4
0.8
0.4
0.3
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
0.75
N/A
N/A
0.80
N/A
N/A
N/A
N/A
(1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5%
tolerance,contact KEMET sales representative.
(2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level.
(3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch
minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin.
(4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10
cycles, -55°C & +85°C.
(5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option.
* Extended Values #Maximum Capacitance Change @ 125°C = +15%
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
Solid Tantalum Surface Mount
T493 SERIES—Military COTS
T493 RATINGS AND PART NUMBER REFERENCE
Capacitance
µF
Case
Size
33.0
33.0
#47.0
47.0
68.0
#100.0
100.0
#150.0
C
D
C
D
D
D
X
X
0.47
0.68
1.0
1.5
1.5
2.2
2.2
#3.3
3.3
#4.7
4.7
4.7
#6.8
6.8
#10.0
10.0
15.0
15.0
#22.0
22.0
33.0
47.0
47.0
#68.0
68.0
A
A
A
A
B
A
B
A
B
A
B
C
B
C
B
C
C
D
C
D
D
D
X
D
X
0.33
0.47
0.68
0.68
1.0
1.0
1.5
1.5
2.2
2.2
3.3
3.3
#4.7
4.7
6.8
6.8
10.0
10.0
#15.0
15.0
15.0
22.0
22.0
33.0
33.0
†47.0
†47.0
A
A
A
B
A
B
A
B
B
C
B
C
B
C
C
D
C
D
C
D
X
D
X
D
X
D
X
KEMET
Part Number
DCL
µA @
25ºC
Max
DF %
@ +25ºC
120 Hz
Max
Std. ESR
Ohms
@+25°C
100 kHz
Max
16 Volt Rating at +85ºC (10 Volt Rating at +125ºC) cont.
T493C336(1)016(2)(3)(4)(5)
5.3
6.0
1.2
T493D336(1)016(2)(3)(4)(5)
5.3
6.0
0.8
T493C476(1)016(2)(3)(4)(5)
7.5
6.0
1.2
T493D476(1)016(2)(3)(4)(5)
7.5
6.0
0.8
T493D686(1)016(2)(3)(4)(5)
10.9
6.0
0.7
T493D107(1)016(2)(3)(4)(5)
16.0
8.0
0.7
T493X107(1)016(2)(3)(4)(5)
16.0
8.0
0.7
T493X157(1)016(2)(3)(4)(5)
24.0
8.0
0.5
20 Volt Rating at +85ºC (13 Volt Rating at +125ºC)
T493A474(1)020(2)(3)(4)(5)
0.5
4.0
14.0
T493A684(1)020(2)(3)(4)(5)
0.5
4.0
12.0
T493A105(1)020(2)(3)(4)(5)
0.5
4.0
10.0
T493A155(1)020(2)(3)(4)(5)
0.5
6.0
8.0
T493B155(1)020(2)(3)(4)(5)
0.5
6.0
6.0
T493A225(1)020(2)(3)(4)(5)
0.5
6.0
7.0
T493B225(1)020(2)(3)(4)(5)
0.5
6.0
3.5
T493A335(1)020(2)(3)(4)(5)
0.7
6.0
7.0
T493B335(1)020(2)(3)(4)(5)
0.7
6.0
3.5
T493A475(1)020(2)(3)(4)(5)
1.0
8.0
6.0
T493B475(1)020(2)(3)(4)(5)
1.0
6.0
3.5
T493C475(1)020(2)(3)(4)(5)
1.0
6.0
2.4
T493B685(1)020(2)(3)(4)(5)
1.4
6.0
3.5
T493C685(1)020(2)(3)(4)(5)
1.4
6.0
1.9
T493B106(1)020(2)(3)(4)(5)
2.0
6.0
3.0
T493C106(1)020(2)(3)(4)(5)
2.0
6.0
1.8
T493C156(1)020(2)(3)(4)(5)
3.0
6.0
1.7
T493D156(1)020(2)(3)(4)(5)
3.0
6.0
1.0
T493C226(1)020(2)(3)(4)(5)
4.4
6.0
1.2
T493D226(1)020(2)(3)(4)(5)
4.4
6.0
0.8
T493D336(1)020(2)(3)(4)(5)
6.6
6.0
0.8
T493D476(1)020(2)(3)(4)(5)
9.4
6.0
0.7
T493X476(1)020(2)(3)(4)(5)
7.5
4.0
0.7
T493D686(1)020(2)(3)(4)(5)
13.6
8.0
0.7
T493X686(1)020(2)(3)(4)(5)
13.6
6.0
0.7
25 Volt Rating at +85ºC (17 Volt Rating at +125ºC)
T493A334(1)025(2)(3)(4)(5)
0.5
4.0
15.0
T493A474(1)025(2)(3)(4)(5)
0.5
4.0
14.0
T493A684(1)025(2)(3)(4)(5)
0.5
4.0
10.0
T493B684(1)025(2)(3)(4)(5)
0.5
4.0
7.5
T493A105(1)025(2)(3)(4)(5)
0.5
4.0
8.0
T493B105(1)025(2)(3)(4)(5)
0.5
4.0
5.0
T493A155(1)025(2)(3)(4)(5)
0.5
6.0
10.0
T493B155(1)025(2)(3)(4)(5)
0.5
6.0
5.0
T493B225(1)025(2)(3)(4)(5)
0.6
6.0
4.5
T493C225(1)025(2)(3)(4)(5)
0.6
6.0
3.5
T493B335(1)025(2)(3)(4)(5)
0.9
6.0
3.5
T493C335(1)025(2)(3)(4)(5)
0.9
6.0
2.5
T493B475(1)025(2)(3)(4)(5)
1.2
6.0
1.5
T493C475(1)025(2)(3)(4)(5)
1.2
6.0
2.4
T493C685(1)025(2)(3)(4)(5)
1.7
6.0
1.9
T493D685(1)025(2)(3)(4)(5)
1.7
6.0
1.4
T493C106(1)025(2)(3)(4)(5)
2.5
6.0
1.5
T493D106(1)025(2)(3)(4)(5)
2.5
6.0
1.0
T493C156(1)025(2)(3)(4)(5)
3.8
6.0
1.5
T493D156(1)025(2)(3)(4)(5)
3.8
6.0
1.0
T493X156(1)025(2)(3)(4)(5)
3.0
6.0
0.7
T493D226(1)025(2)(3)(4)(5)
5.5
6.0
0.8
T493X226(1)025(2)(3)(4)(5)
4.4
4.0
0.7
T493D336(1)025(2)(3)(4)(5)
8.3
6.0
0.7
T493X336(1)025(2)(3)(4)(5)
8.3
6.0
0.7
T493D476(1)025(2)(3)(4)(5)
11.8
10.0
0.7
T493X476(1)025(2)(3)(4)(5)
11.8
6.0
0.7
Low ESR
Ohms
@+25°C
100 kHz
Max
0.3
0.25
0.5
0.2
0.2
0.125
0.1
0.2
Ultra-Low
ESR, Ohms
@+25°C
100 kHz
Max
0.23
0.15
0.35
0.10
0.15
0.10
0.08
0.10
9.0
8.0
5.5
4.5
4.0
4.0
1.5
4.0
1.3
1.8
1.0
0.6
1.0
0.6
1.0
0.5
0.4
0.35
0.4
0.3
0.2
0.2
0.15
0.2
0.15
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.0
0.48
0.38
0.28
N/A
0.18
0.15
0.10
0.10
0.15
0.12
10.0
9.0
6.0
5.5
4.0
2.0
3.0
1.5
1.2
2.2
2.0
1.2
1.0
0.6
0.6
1.0
0.5
0.4
0.9
0.35
0.2
0.2
0.23
0.4
0.3
0.2
0.3
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.30
N/A
0.75
N/A
0.58
0.49
N/A
0.45
N/A
N/A
0.28
0.20
0.20
0.23
0.09
0.18
0.12
0.15
(1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5%
tolerance,contact KEMET sales representative.
(2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level.
(3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch
minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin.
(4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10
cycles, -55°C & +85°C.
(5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option.
* Extended Values
#Maximum Capacitance Change @ 125°C = +15% † Maximum Capacitance Change @ 125°C = +20%
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
25
SOLID TANTALUM CHIP CAPACITORS
T493 SERIES—Military COTS
T493 RATINGS AND PART NUMBER REFERENCE
Capacitance
µF
Case
Size
0.10
0.15
0.22
0.33
0.47
0.47
0.68
0.68
1.0
1.0
1.5
1.5
2.2
2.2
#3.3
3.3
4.7
4.7
6.8
6.8
#10.0
10.0
10.0
15.0
15.0
#22.0
22.0
#33.0
#47.0
A
A
A
A
A
B
A
B
A
B
B
C
B
C
B
C
C
D
C
D
C
D
X
D
X
D
X
X
E
0.10
0.15
0.15
0.22
0.33
0.47
0.47
0.68
1.0
1.5
1.5
2.2
2.2
3.3
4.7
4.7
6.8
A
A
B
B
B
B
C
C
C
C
D
C
D
D
D
X
X
KEMET
Part Number
DCL
µA @
25ºC
Max
DF %
@ +25ºC
120 Hz
Max
Std. ESR
Ohms
@+25°C
100 kHz
Max
35 Volt Rating at +85ºC (23 Volt Rating at +125ºC)
T493A104(1)035(2)(3)(4)(5)
0.5
4.0
20.0
T493A154(1)035(2)(3)(4)(5)
0.5
4.0
19.0
T493A224(1)035(2)(3)(4)(5)
0.5
4.0
18.0
T493A334(1)035(2)(3)(4)(5)
0.5
4.0
15.0
T493A474(1)035(2)(3)(4)(5)
0.5
4.0
14.0
T493B474(1)035(2)(3)(4)(5)
0.5
4.0
8.0
T493A684(1)035(2)(3)(4)(5)
0.5
4.0
10.0
T493B684(1)035(2)(3)(4)(5)
0.5
4.0
6.5
T493A105(1)035(2)(3)(4)(5)
0.5
4.0
10.0
T493B105(1)035(2)(3)(4)(5)
0.5
4.0
5.0
T493B155(1)035(2)(3)(4)(5)
0.5
6.0
5.0
T493C155(1)035(2)(3)(4)(5)
0.5
6.0
4.5
T493B225(1)035(2)(3)(4)(5)
0.8
6.0
4.0
T493C225(1)035(2)(3)(4)(5)
0.8
6.0
3.5
T493B335(1)035(2)(3)(4)(5)
1.2
6.0
3.5
T493C335(1)035(2)(3)(4)(5)
1.2
6.0
2.5
T493C475(1)035(2)(3)(4)(5)
1.7
6.0
2.5
T493D475(1)035(2)(3)(4)(5)
1.7
6.0
1.5
T493C685(1)035(2)(3)(4)(5)
2.4
6.0
2.0
T493D685(1)035(2)(3)(4)(5)
2.4
6.0
1.3
T493C106(1)035(2)(3)(4)(5)
3.5
6.0
2.0
T493D106(1)035(2)(3)(4)(5)
3.5
6.0
1.0
T493X106(1)035(2)(3)(4)(5)
2.8
4.0
0.9
T493D156(1)035(2)(3)(4)(5)
5.3
6.0
0.8
T493X156(1)035(2)(3)(4)(5)
5.3
6.0
0.9
T493D226(1)035(2)(3)(4)(5)
7.7
6.0
0.7
T493X226(1)035(2)(3)(4)(5)
7.7
6.0
0.7
T493X336(1)035(2)(3)(4)(5)
11.6
6.0
0.6
T493E476(1)035(2)(3)(4)(5)
16.5
10.0
0.5
50 Volt Rating at +85ºC (33 Volt Rating at +125ºC)
T493A104(1)050(2)(3)(4)(5)
0.5
4.0
20.0
T493A154(1)050(2)(3)(4)(5)
0.5
4.0
19.0
T493B154(1)050(2)(3)(4)(5)
0.5
4.0
16.0
T493B224(1)050(2)(3)(4)(5)
0.5
4.0
14.0
T493B334(1)050(2)(3)(4)(5)
0.5
4.0
10.0
T493B474(1)050(2)(3)(4)(5)
0.5
4.0
9.0
T493C474(1)050(2)(3)(4)(5)
0.5
4.0
8.0
T493C684(1)050(2)(3)(4)(5)
0.5
4.0
7.0
T493C105(1)050(2)(3)(4)(5)
0.5
4.0
5.5
T493C155(1)050(2)(3)(4)(5)
0.8
6.0
4.5
T493D155(1)050(2)(3)(4)(5)
0.8
6.0
3.5
T493C225(1)050(2)(3)(4)(5)
1.1
6.0
3.5
T493D225(1)050(2)(3)(4)(5)
1.1
6.0
2.5
T493D335(1)050(2)(3)(4)(5)
1.7
6.0
2.0
T493D475(1)050(2)(3)(4)(5)
2.4
6.0
1.5
T493X475(1)050(2)(3)(4)(5)
1.9
4.0
0.9
T493X685(1)050(2)(3)(4)(5)
3.5
6.0
1.0
Low ESR
Ohms
@+25°C
100 kHz
Max
Ultra-Low
ESR, Ohms
@+25°C
100 kHz
Max
10.0
6.0
6.0
6.0
4.0
2.5
6.0
2.5
6.0
2.0
3.0
2.5
2.5
1.5
1.3
0.8
0.6
0.7
0.9
0.5
1.2
0.3
0.25
0.3
0.3
0.4
0.3
0.3
0.3
N/A
N/A
N/A
N/A
N/A
1.5
N/A
N/A
N/A
1.5
N/A
N/A
1.5
0.75
N/A
0.60
0.45
N/A
N/A
0.40
N/A
0.25
0.18
0.23
0.20
0.20
0.20
0.18
N/A
10.0
10.0
10.0
10.0
2.5
2.0
1.8
1.6
1.6
1.5
1.0
1.5
0.8
0.8
0.6
0.3
0.5
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
1.3
N/A
N/A
N/A
0.60
0.70
0.28
0.30
N/A
(1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5%
tolerance,contact KEMET sales representative.
(2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level.
(3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch
minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin.
(4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10
cycles, -55°C & +85°C.
(5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option.
* Extended Values
26
#Maximum Capacitance Change @ 125°C = +15%
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
T494 SERIES — Low ESR, Industrial Grade
FEATURES
•
•
•
•
•
•
•
Low ESR values in EIA 535BAAC sizes
Taped and Reeled per EIA 481-1
Symmetrical, Compliant Terminations
Optional Gold-plated Terminations
Laser-marked Case
100% Surge Current test on C, D, E, U, V, X sizes
Capacitance: 0.1 F to 1000 F
Tolerance: ±10%, ±20%
Voltage: 3-50 VDC
Extended Range Values
Low Profile Case Sizes
RoHS Compliant & Leadfree Terminations
(See www.kemet.com for lead transition)
Operating Temperature: -55˚C to +125˚C
•
•
•
•
•
•
CAPACITOR OUTLINE DRAWING
CATHODE (-) END
VIEW
SIDE VIEW
ANODE (+) END
VIEW
B
W
BOTTOM VIEW
Solid Tantalum Surface Mount
SOLID TANTALUM CHIP CAPACITORS
B
H
E
K
T
S
X
F
P
S
G
R
A
L
Termination
cutout at
KEMET’s
Option,
either end
STANDARD T494 DIMENSIONS
Millimeters (inches)
CASE SIZE
KEMET
EIA
A
3216-18
B
3528-21
C
6032-28
D
7343-31
X
7343-43
E
7260-38
COMPONENT
± 0.1
± 0.3
B ± 0.15
± (.004) S* ± (.012) (Ref) ± (.006)
K* ±± 0.20
(.008) F*
L*
W*
H*
3.2 ± 0.2
(.126 ± .008)
3.5 ± 0.2
(.138 ± .008)
6.0 ± 0.3
(.236 ± .012)
7.3 ± 0.3
(.287 ± .012)
7.3 ± 0.3
(.287 ± .012)
7.3 ± 0.3
(.287 ± .012)
1.6 ±0.2
(.063 ±.008)
2.8 ± 0.2
(.110 ± .008)
3.2 ± 0.3
(.126 ± .012)
4.3 ± 0.3
(.169 ± .012)
4.3 ± 0.3
(.169 ± .012)
6.0 ± 0.3
(.236 ± .012)
1.6 ± 0.2
(.063 ± .008)
1.9 ± 0.2
(.075 ± .008)
2.5 ± 0.3
(.098 ± .012)
2.8 ± 0.3
(.110 ± .012)
4.0 ± 0.3
(.157 ± .012)
3.6 ± 0.2
(.142 ± .008)
0.9
(.035)
1.1
(.043)
1.4
(.055)
1.5
(.059)
2.3
(.091)
2.3
(.091)
1.2
(.047)
2.2
(.087)
2.2
(.087)
2.4
(.094)
2.4
(.094)
4.1
(.161)
0.4
(.016)
0.4
(.016)
0.5
(.020)
0.5
(.020)
0.5
(.020)
0.5
(.020)
0.8
(.031)
0.8
(.031)
1.3
(.051)
1.3
(.051)
1.3
(.051)
1.3
(.051)
X
(Ref)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
0.10 ± 0.10
(.004 ± .004)
P
R
T
A
G
E
(Ref) (Ref) (Ref) (Min) (Ref) (Ref)
0.4
(.016)
0.5
(.020)
0.9
(.035)
0.9
(.035)
1.7
(.067)
0.9
(.035)
0.4
(.016)
1.0
(.039)
1.0
(.039)
1.0
(.039)
1.0
(.039)
1.0
(.039)
0.13
(.005)
0.13
(.005)
0.13
(.005)
0.13
(.005)
0.13
(.005)
0.13
(.005)
1.4
(.055)
2.1
(.083)
3.1
(.122)
3.8
(.150)
3.8
(.150)
3.8
(.150)
1.1
(.043)
1.8
(.071)
2.8
(.110)
3.5
(.138)
3.5
(.138)
3.5
(.138)
1.3
(.051)
2.2
(.087)
2.4
(.094)
3.5
(.138)
3.5
(.138)
3.5
(.138)
Notes: 1. Metric dimensions govern.
2. (Ref) - Dimensions provided for reference only.
* Mil-C-55365/8 Specified Dimensions
)
LOW PROFILE T494 DIMENSIONS
Millimeters (inches)
CASE SIZE
KEMET
EIA
R
2012-12
COMPONENT
L
W
S
2.0 0.2
(.079 ± .008) (.051 ±
1.6 ± 0.2
3216-12 3.2 ± 0.2
T
3528-12
U
3.5 ± 0.2
(.138 ± .008)
±
6032-15
V
7343-20
2.8 ± 0.2
(.110 ± .008)
±
7.3 ± 0.3
4.3 ± 0.3
(.287 ± .012) (.169 ± .012)
H Max.
K Min.
F ± 0.1
S ± 0.3
X
(Ref
T
(Ref)
A
(Min)
G
(Ref)
E
(Ref)
1.2
(.047)
1.2
((.047))
1.2
(.047)
1.5
(.059)
2.0
(.079)
0.3
(.012)
0.3
((.012))
0.3
(.012)
0.5
(.020)
0.9
(.035)
0.9
(.035)
1.2
((.047))
2.2
(.087)
2.2
(.087)
2.4
(.094)
0.5
(.020)
0.8
((.031))
0.8
(.031)
1.3
(.051)
1.3
(.051)
0.05
(.002)
0.05
((.002))
0.05
(.002)
0.05
(.002)
0.05
(.002)
0.13
(.005)
0.13
((.005))
0.13
(.005)
0.13
(.005)
0.13
(.005)
0.8
(.031)
1.4
((.055))
2.1
(.083)
3.1
(.122)
3.8
(.150)
0.5
(.020)
1.1
((.043))
1.8
(.071)
2.8
(.110)
3.5
(.138)
0.8
(.031)
1.3
((.051))
2.2
(.087)
2.4
(.094)
3.5
(.138)
Notes: 1. Metric dimensions govern.
.
3. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch.
T494 ORDERING INFORMATION
T 494 B 105 M 035 A S*
Tantalum
Series
T494 - Low ESR, Industrial Grade
Case Size
A, B, C, D, E, R, S, T, U, V, X
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
*Pb-free supply is not guaranteed with
the ‘S’ termination code.
This termination code not available
effective 15 July 2007.
Lead Material
T - 100% Tin (Sn) Plated
H - Tin/Lead
(SnPb 5% Pb minimum)
G - Gold Plated (A, B, C, D, X only)
**S - Not recommended for new designs
Failure Rate
A - Not Applicable
Voltage
Capacitance Tolerance
*Part number example: T494B105M035AT (14 digits - no spaces). See www.kemet.com for Pb Free transition.
** “S” Termination codes are converting from 90Sn/10 Pb to 100% tin finishes. Orders including “S” suffix
termination codes do not quarantee Pb-free product.
M - ± 20%
K - ± 10%
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
27
SOLID TANTALUM CHIP CAPACITORS
T494 SERIES—Low ESR, Industrial Grade
T494 RATINGS & PART NUMBER REFERENCE
Capacitance
µF
100.0
220.0
#33.0
3.3
4.7
6.8
6.8
10.0
10.0
#10.0
#10.0
15.0
15.0
15.0
#15.0
22.0
22.0
#22.0
#22.0
#22.0
33.0
33.0
33.0
#33.0
#33.0
47.0
47.0
#47.0
#47.0
#47.0
68.0
68.0
#68.0
#68.0
#68.0
100.0
#100.0
#100.0
#100.0
†100.0
†100.0
150.0
150.0
#150.0
†150.0
#220.0
#220.0
#330.0
#330.0
†330.0
#470.0
#470.0
#680.0
#680.0
#1000.0
#1000.0
2.2
2.2
3.3
4.7
4.7
6.8
6.8
#6.8
#6.8
10.0
10.0
10.0
#10.0
#10.0
Case
Size
KEMET
Part Number
DC
Leakage
µA @ 25°C
Max
DF %
@ +25ºC
120 Hz
Max
2.5 Volt Rating at +85ºC (1.7 Volt Rating at +125ºC)
2.5
24.0
T
T494T107(1)2R5A(2)
D
T494D227(1)2R5A(2)
5.5
8.0
3 Volt Rating at +85ºC (2 Volt Rating at +125ºC)
A
T494A336(1)003A(2)
1.0
6.0
4 Volt Rating at +85ºC (2.7 Volt Rating at +125ºC)
A
T494A335(1)004A(2)
0.5
6.0
A
T494A475(1)004A(2)
0.5
6.0
A
T494A685(1)004A(2)
0.5
6.0
S
T494S685(1)004A(2)
0.5
6.0
B
T494B106(1)004A(2)
0.5
6.0
A
T494A106(1)004A(2)
0.5
6.0
S
T494S106(1)004A(2)
0.5
6.0
R
T494R106M004A(2)
0.5
8.0
B
T494B156(1)004A(2)
0.6
6.0
A
T494A156(1)004A(2)
0.6
6.0
T
T494T156(1)004A(2)
0.6
6.0
S
T494S156M004A(2)
0.6
10.0
C
T494C226(1)004A(2)
0.9
6.0
B
T494B226(1)004A(2)
0.9
6.0
A
T494A226(1)004A(2)
0.9
6.0
S
T494S226M004A(2)
0.9
10.0
T
T494T226(1)004A(2)
0.9
6.0
C
T494C336(1)004A(2)
1.3
6.0
U
T494U336(1)004A(2)
1.3
6.0
B
T494B336(1)004A(2)
1.3
6.0
A
T494A336(1)004A(2)
1.3
6.0
T
T494T336M004A(2)
1.3
8.0
C
T494C476(1)004A(2)
1.9
6.0
U
T494U476(1)004A(2)
1.9
6.0
B
T494B476(1)004A(2)
1.9
6.0
A
T494A476M004A(2)
1.9
12.0
T
T494T476M004A(2)
1.9
12.0
D
T494D686(1)004A(2)
2.7
6.0
C
T494C686(1)004A(2)
2.7
6.0
U
T494U686(1)004A(2)
2.7
6.0
B
T494B686(1)004A(2)
2.7
6.0
A
T494A686(1)004A(2)
2.8
30.0
D
T494D107(1)004A(2)
4.0
8.0
C
T494C107(1)004A(2)
4.0
8.0
U
T494U107(1)004A(2)
4.0
10.0
B
T494B107M004A(2)
4.0
8.0
A
T494A107M004A(2)
4.0
30.0
T
T494T107M004A(2)
4.0
30.0
D
T494D157(1)004A(2)
6.0
8.0
V
T494V157(1)004A(2)
6.0
8.0
C
T494C157(1)004A(2)
6.0
8.0
B
T494B157M004A(2)
6.0
12.0
V
T494V227(1)004A(2)
8.8
8.0
B
T494B227M004A(2)
8.8
8.0
D
T494D337(1)004A(2)
13.2
8.0
C
T494C337(1)004A(2)
13.2
10.0
V
T494V337(1)004A(2)
13.2
12.0
X
T494X477(1)004A(2)
18.8
8.0
D
T494D477(1)004A(2)
18.8
8.0
X
T494X687M004A(2)
27.2
12.0
D
T494D687M004A(2)
27.2
12.0
X
T494X108(1)004A(2)
40.0
12.0
E
T494E108M004A(2)
40.0
15.0
**6 Volt Rating at +85ºC (4 Volt Rating at +125ºC)
R
T494R225(1)006A(2)
0.5
6.0
A
T494A225(1)006A(2)
0.5
6.0
A
T494A335(1)006A(2)
0.5
6.0
A
T494A475(1)006A(2)
0.5
6.0
S
T494S475(1)006A(2)
0.5
6.0
B
T494B685(1)006A(2)
0.5
6.0
A
T494A685(1)006A(2)
0.5
6.0
S
T494S685(1)006A(2)
0.5
6.0
R
T494R685(1)006A(2)
0.5
8.0
B
T494B106(1)006A(2)
0.6
6.0
A
T494A106(1)006A(2)
0.6
6.0
T
T494T106(1)006A(2)
0.6
6.0
S
T494S106M006A(2)
0.6
10.0
R
T494R106M006A(2)
0.6
8.0
ESR Ω
@ +25ºC
100 kHz
Max
3.5
0.2
2.0
4.0
3.5
3.0
7.0
1.2
2.0
9.0
6.0
1.2
1.5
2.0
9.0
0.5
0.6
1.5
8.0
2.5
0.5
0.6
0.5
3.0
3.5
0.5
0.6
0.5
2.0
4.0
0.20
0.25
0.60
2.00
3.00
0.20
0.20
1.00
0.65
3.00
4.50
0.15
0.20
0.30
1.00
0.30
0.40
0.15
0.09
0.30
0.15
0.15
0.10
0.15
0.10
0.08
20.0
6.0
6.0
3.5
8.0
1.2
2.0
9.0
10.0
1.0
2.0
1.2
9.0
6.0
Capacitance
µF
15.0
15.0
#15.0
#15.0
#15.0
22.0
22.0
22.0
#22.0
#22.0
33.0
33.0
#33.0
#33.0
#33.0
47.0
47.0
#47.0
#47.0
†47.0
47.0
68.0
#68.0
#68.0
#68.0
#68.0
100.0
100.0
#100.0
#100.0
#100.0
150.0
#150.0
#150.0
220.0
#220.0
#220.0
#220.0
#330.0
#330.0
#330.0
#470.0
#470.0
#470.0
#680.0
1.5
2.2
2.2
3.3
3.3
#3.3
4.7
4.7
#4.7
#4.7
6.8
6.8
6.8
#6.8
10.0
10.0
#10.0
#10.0
#10.0
15.0
15.0
15.0
#15.0
#15.0
Case
Size
KEMET
Part Number
DC
Leakage
µA @ 25°C
Max
DF %
@ +25ºC
120 Hz
Max
**6 Volt Rating at +85ºC (4 Volt Rating at +125ºC)
0.9
6.0
C
T494C156(1)006A(2)
B
T494B156(1)006A(2)
0.9
6.0
A
T494A156(1)006A(2)
0.9
6.0
T
T494T156(1)006A(2)
0.9
6.0
S
T494S156M006A(2)
0.9
10.0
C
T494C226(1)006A(2)
1.4
6.0
U
T494U226(1)006A(2)
1.4
6.0
B
T494B226(1)006A(2)
1.4
6.0
A
T494A226(1)006A(2)
1.4
6.0
T
T494T226M006A(2)
1.4
8.0
C
T494C336(1)006A(2)
2.0
6.0
U
T494U336(1)006A(2)
2.0
6.0
B
T494B336(1)006A(2)
2.0
6.0
A
T494A336(1)006A(2)
2.0
12.0
T
T494T336M006A(2)
2.0
12.0
D
T494D476(1)006A(2)
2.9
6.0
C
T494C476(1)006A(2)
2.9
6.0
U
T494U476(1)006A(2)
2.9
6.0
B
T494B476(1)006A(2)
2.9
6.0
A
T494A476M006A(2)
3.0
12.0
T
T494T476(1)006A(2)
3.0
24.0
D
T494D686(1)006A(2)
4.1
6.0
C
T494C686(1)006A(2)
4.1
6.0
U
T494U686(1)006A(2)
4.1
10.0
B
T494B686M006A(2)
4.1
8.0
A
T494A686(1)006A(2)
5.0
30.0
D
T494D107(1)006A(2)
6.0
8.0
V
T494V107(1)006A(2)
6.0
8.0
C
T494C107(1)006A(2)
6.0
8.0
U
T494U107M006A(2)
6.0
10.0
B
T494B107(1)006A(2)
6.0
15.0
D
T494D157(1)006A(2)
9.0
8.0
C
T494C157M006A(2)
9.0
8.0
V
T494V157(1)006A(2)
9.0
8.0
X
T494X227(1)006A(2)
13.2
8.0
D
T494D227(1)006A(2)
13.2
8.0
C
T494C227M006A(2)
13.2
10.0
V
T494V227M006A(2)
13.2
12.0
X
T494X337(1)006A(2)
19.8
8.0
D
T494D337(1)006A(2)
19.8
8.0
E
T494E337(1)006A(2)
20.8
8.0
X
T494X477(1)006A(2)
28.2
10.0
D
T494D477M006A(2)
28.2
12.0
E
T494E477(1)006A(2)
29.6
10.0
E
T494E687M006A(2)
40.8
12.0
10 Volt Rating at +85ºC (7 Volt Rating at +125ºC)
A
T494A155(1)010A(2)
0.5
6.0
B
T494B225(1)010A(2)
0.5
6.0
A
T494A225(1)010A(2)
0.5
6.0
A
T494A335(1)010A(2)
0.5
6.0
S
T494S335(1)010A(2)
0.5
6.0
R
T494R335(1)010A(2)
0.3
8.0
B
T494B475(1)010A(2)
0.5
6.0
A
T494A475(1)010A(2)
0.5
6.0
S
T494S475(1)010A(2)
0.5
6.0
R
T494R475M010A(2)
0.5
8.0
B
T494B685(1)010A(2)
0.7
6.0
A
T494A685(1)010A(2)
0.7
6.0
T
T494T685(1)010A(2)
0.7
6.0
S
T494S685M010A(2)
0.7
10.0
C
T494C106(1)010A(2)
1.0
6.0
B
T494B106(1)010A(2)
1.0
6.0
A
T494A106(1)010A(2)
1.0
6.0
T
T494T106(1)010A(2)
1.0
6.0
S
T494S106M010A(2)
1.0
10.0
C
T494C156(1)010A(2)
1.5
6.0
U
T494U156(1)010A(2)
1.5
6.0
B
T494B156(1)010A(2)
1.5
6.0
A
T494A156(1)010A(2)
1.5
8.0
T
T494T156M010A(2)
1.5
8.0
(1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance.
(2) To complete KEMET Part Number, insert S, H, G, or T lead material designation as shown on page 27.
*Extended Values
**6 Volt product equivalent to 6.3 volt product.
#Maximum Capacitance Change @ 125ºC=+15%.
†Maximum Capacitance Change @ 125ºC=+20%.
Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’s option.
Voltage substitutions will be marked with the higher voltage rating.
28
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
ESR Ω
@ +25ºC
100 kHz
Max
0.6
0.7
2.0
2.5
10.0
0.5
0.8
0.6
3.0
3.5
0.3
0.6
0.6
2.0
4.0
0.22
0.25
0.60
0.50
2.50
4.00
0.20
0.20
1.00
0.65
3.00
0.15
0.20
0.30
1.20
1.50
0.15
0.30
0.30
0.15
0.15
0.30
0.30
0.15
0.15
0.25
0.10
0.15
0.20
0.10
6.0
1.5
6.0
4.0
9.0
10.0
1.5
3.0
9.0
8.0
1.2
3.0
2.0
9.0
0.6
0.8
1.8
3.5
12.0
0.5
0.8
0.7
4.0
3.5
SOLID TANTALUM CHIP CAPACITORS
Solid Tantalum Surface Mount
T494 SERIES—Low ESR, Industrial Grade
T494 RATINGS & PART NUMBER REFERENCE
Capacitance
µF
22.0
22.0
#22.0
#22.0
#22.0
33.0
33.0
33.0
#33.0
#33.0
47.0
47.0
#47.0
#47.0
#47.0
68.0
#68.0
68.0
#68.0
#68.0
100.0
#100.0
#100.0
150.0
#150.0
#150.0
#150.0
#220.0
#220.0
#220.0
#330.0
#330.0
#330.0
#470.0
#470.0
1.0
1.5
2.2
2.2
#2.2
3.3
3.3
4.7
4.7
4.7
6.8
6.8
#6.8
10.0
10.0
10.0
#10.0
#10.0
15.0
15.0
#15.0
22.0
22.0
#22.0
#22.0
33.0
#33.0
#33.0
47.0
47.0
#47.0
68.0
#68.0
DC
DF %
Leakage
@ +25ºC
µA @ 25°C
120 Hz
Max
Max
10 Volt Rating at +85ºC (7 Volt Rating at +125ºC)
2.2
6.0
C
T494C226(1)010A(2)
U
T494U226(1)010A(2)
2.2
6.0
B
T494B226(1)010A(2)
2.2
6.0
A
T494A226M010A(2)
2.2
10.0
T
T494T226M010A(2)
2.2
12.0
D
T494D336(1)010A(2)
3.3
6.0
V
T494V336(1)010A(2)
3.3
6.0
C
T494C336(1)010A(2)
3.3
6.0
U
T494U336(1)010A(2)
3.3
6.0
B
T494B336(1)010A(2)
3.3
6.0
D
T494D476(1)010A(2)
4.7
6.0
V
T494V476(1)010A(2)
4.7
6.0
C
T494C476(1)010A(2)
4.7
6.0
U
T494U476(1)010A(2)
4.7
10.0
B
T494B476M010A(2)
4.7
8.0
D
T494D686(1)010A(2)
6.8
6.0
C
T494C686(1)010A(2)
6.8
6.0
V
T494V686(1)010A(2)
6.8
6.0
U
T494U686M010A(2)
6.8
10.0
B
T494B686M010A(2)
6.8
10.0
D
T494D107(1)010A(2)
10.0
8.0
C
T494C107(1)010A(2)
10.0
8.0
V
T494V107(1)010A(2)
10.0
8.0
X
T494X157(1)010A(2)
15.0
8.0
D
T494D157(1)010A(2)
15.0
8.0
C
T494C157(1)010A(2)
15.0
10.0
V
T494V157M010A(2)
15.0
8.0
X
T494X227(1)010A(2)
22.0
8.0
D
T494D227(1)010A(2)
22.0
8.0
V
T494V227(1)010A(2)
22.0
12.0
X
T494X337(1)010A(2)
33.0
10.0
D
T494D337M010A(2)
33.0
10.0
E
T494E337(1)010A(2)
33.0
10.0
X
T494X477(1)010A(2)
47.0
10.0
E
T494E477M010A(2)
47.0
12.0
16 Volt Rating at +85ºC (10 Volt Rating at + 125ºC)
A
T494A105(1)016A(2)
0.5
4.0
A
T494A155(1)016A(2)
0.5
6.0
A
T494A225(1)016A(2)
0.5
6.0
S
T494S225(1)016A(2)
0.5
6.0
R
T494R225(1)016A(2)
0.5
8.0
B
T494B335(1)016A(2)
0.5
6.0
A
T494A335(1)016A(2)
0.5
6.0
B
T494B475(1)016A(2)
0.8
6.0
A
T494A475(1)016A(2)
0.8
6.0
T
T494T475(1)016A(2)
0.8
6.0
C
T494C685(1)016A(2)
1.1
6.0
B
T494B685(1)016A(2)
1.1
6.0
A
T494A685(1)016A(2)
1.1
6.0
C
T494C106(1)016A(2)
1.6
6.0
U
T494U106(1)016A(2)
1.6
6.0
B
T494B106(1)016A(2)
1.6
6.0
A
T494A106(1)016A(2)
1.6
8.0
T
T494T106(1)016A(2)
1.6
8.0
C
T494C156(1)016A(2)
2.4
6.0
U
T494U156(1)016A(2)
2.4
6.0
B
T494B156(1)016A(2)
2.4
6.0
D
T494D226(1)016A(2)
3.6
6.0
C
T494C226(1)016A(2)
3.6
6.0
U
T494U226(1)016A(2)
3.6
10.0
B
T494B226(1)016A(2)
3.6
6.0
D
T494D336(1)016A(2)
5.3
6.0
C
T494C336(1)016A(2)
5.3
6.0
U
T494U336(1)016A(2)
5.3
12.0
D
T494D476(1)016A(2)
7.5
6.0
V
T494V476(1)016A(2)
7.5
6.0
C
T494C476(1)016A(2)
7.5
6.0
D
T494D686(1)016A(2)
10.9
6.0
V
T494V686(1)016A(2)
10.9
6.0
Case
Size
KEMET
Part Number
ESR Ω
@ +25ºC
100 kHz
Max
0.4
0.8
0.7
4.5
6.0
0.25
0.30
0.30
0.60
1.40
0.22
0.30
0.30
1.20
0.65
0.20
0.30
0.30
1.20
1.50
0.15
0.20
0.40
0.15
0.15
0.70
0.30
0.15
0.15
0.50
0.10
0.15
0.25
0.10
0.10
6.0
6.0
4.0
10.0
20.0
2.0
4.0
1.5
3.0
3.0
0.8
1.2
3.0
0.6
1.0
0.8
3.0
6.0
0.4
0.8
0.8
0.25
0.35
1.80
1.00
0.25
0.30
2.20
0.2
0.3
0.5
0.15
0.5
(1)
To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance.
(2)
To complete KEMET Part Number, insert S, H, G, or T lead material designation as shown on page 27.
Capacitance
µF
100.0
#100.0
†100.0
#150.0
#150.0
#220.0
#220.0
0.68
1.0
1.0
†1.0
1.5
1.5
2.2
2.2
3.3
#3.3
3.3
4.7
4.7
#4.7
6.8
6.8
#6.8
#6.8
10.0
10.0
#10.0
15.0
15.0
22.0
22.0
#22.0
33.0
#33.0
†33.0
47.0
47.0
68.0
#68.0
#100.0
#100.0
#150.0
0.33
0.47
0.68
1.0
1.0
1.5
1.5
2.2
2.2
3.3
3.3
4.7
#4.7
#4.7
6.8
6.8
10.0
10.0
15.0
#15.0
22.0
22.0
22.0
33.0
#33.0
#33.0
#47.0
†47.0
†68.0
†68.0
†100.0
DC
DF %
Leakage
@ +25ºC
µA @ 25°C
120 Hz
Max
Max
16 Volt Rating at +85ºC (10 Volt Rating at + 125ºC)
X
T494X107(1)016A(2)
16.0
8.0
D
T494D107(1)016A(2)
16.0
8.0
V
T494V107(1)016A(2)
16.0
12.0
X
T494X157(1)016A(2)
24.0
8.0
D
T494D157(1)016A(2)
24.0
12.0
X
T494X227(1)016A(2)
35.2
10.0
E
T494E227(1)016A(2)
35.2
7.2
20 Volt Rating at +85ºC (13 Volt Rating at +125ºC)
A
T494A684(1)020A(2)
0.5
4.0
A
T494A105(1)020A(2)
0.5
4.0
S
T494S105(1)020A(2)
0.5
6.0
R
T494R105(1)020A(2)
0.2
6.0
A
T494A155(1)020AS(2)
0.5
6.0
S
T494S155(1)020A(2)
0.5
6.0
B
T494B225(1)020A(2)
0.5
6.0
A
T494A225(1)020A(2)
0.5
6.0
B
T494B335(1)020A(2)
0.7
6.0
A
T494A335(1)020A(2)
0.7
6.0
T
T494T335(1)020A(2)
0.7
6.0
C
T494C475(1)020A(2)
1.0
6.0
B
T494B475(1)020A(2)
1.0
6.0
A
T494A475(1)020A(2)
1.0
6.0
C
T494C685(1)020A(2)
1.4
6.0
U
T494U685(1)020A(2)
1.4
6.0
B
T494B685(1)020A(2)
1.4
6.0
A
T494A685M020A(2)
1.4
8.0
C
T494C106(1)020A(2)
2.0
6.0
U
T494U106(1)020A(2)
2.0
6.0
B
T494B106(1)020A(2)
2.0
6.0
D
T494D156(1)020A(2)
3.0
6.0
C
T494C156(1)020A(2)
3.0
6.0
D
T494D226(1)020A(2)
4.4
6.0
V
T494V226(1)020A(2)
4.4
6.0
C
T494C226(1)020A(2)
4.4
6.0
D
T494D336(1)020A(2)
6.6
6.0
C
T494C336M020A(2)
6.6
6.0
V
T494V336(1)020A(2)
6.6
8.0
C
T494C476M020A(2)
9.4
10.0
D
T494D476(1)020A(2)
9.4
6.0
X
T494X686(1)020A(2)
13.6
6.0
D
T494D686(1)020A(2)
13.6
8.0
X
T494X107(1)020A(2)
20.0
8.0
E
T494E107(1)020A(2)
20.0
8.0
X
T494X157(1)020A(2)
30.0
10.0
25 Volt Rating at +85ºC (17 Volt Rating at +125ºC)
A
T494A334(1)025A(2)
0.5
4.0
A
T494A474(1)025A(2)
0.5
4.0
A
T494A684(1)025A(2)
0.5
4.0
B
T494B105(1)025A(2)
0.5
4.0
A
T494A105(1)025A(2)
0.5
4.0
B
T494B155(1)025A(2)
0.5
6.0
A
T494A155(1)025A(2)
0.5
6.0
C
T494C225(1)025A(2)
0.6
6.0
B
T494B225(1)025A(2)
0.6
6.0
C
T494C335(1)025A(2)
0.9
6.0
B
T494B335(1)025A(2)
0.9
6.0
C
T494C475(1)025A(2)
1.2
6.0
B
T494B475(1)025A(2)
1.2
6.0
A
T494A475M025A(2)
1.2
8.0
C
T494C685(1)025A(2)
1.7
6.0
B
T494B685(1)025A(2)
1.7
8.0
D
T494D106(1)025A(2)
2.5
6.0
C
T494C106(1)025A(2)
2.5
6.0
D
T494D156(1)025A(2)
3.8
6.0
C
T494C156(1)025A(2)
3.8
6.0
D
T494D226(1)025A(2)
5.5
6.0
C
T494C226(1)025A(2)
5.5
6.0
V
T494V226(1)025A(2)
5.5
6.0
X
T494X336(1)025A(2)
8.3
6.0
D
T494D336(1)025A(2)
8.3
6.0
C
T494C336(1)025A(2)
8.3
10.0
X
T494X476(1)025A(2)
11.8
6.0
D
T494D476(1)025A(2)
11.8
10.0
X
T494X686M025A(2)
17.0
8.0
D
T494D686M025A(2)
17.0
10.0
X
T494X107M025A(2)
25.0
8.0
Case
Size
KEMET
Part Number
*Extended Values
**6 Volt product equivalent to 6.3 volt product.
#Maximum Capacitance Change @ 125ºC=+15%.
†Maximum Capacitance Change @ 125ºC=+20%.
Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’s option.
Voltage substitutions will be marked with the higher voltage rating.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
ESR Ω
@ +25ºC
100 kHz
Max
0.15
0.15
0.5
0.15
0.4
0.4
0.5
8.0
5.5
10.0
15.0
4.5
9.0
1.5
4.0
1.3
4.0
4.0
0.6
1.0
3.0
0.6
1.4
1.0
3.0
0.5
0.8
1.0
0.35
0.40
0.3
0.4
0.4
0.25
0.40
0.40
0.80
0.20
0.20
0.20
0.15
0.30
0.30
10.0
9.0
6.0
2.0
4.0
1.5
3.0
2.2
1.2
1.2
2.0
0.6
1.0
3.0
0.6
2.0
0.4
0.6
0.35
0.90
0.3
1.0
0.5
0.3
0.4
1.0
0.3
0.2
0.3
0.5
0.25
29
SOLID TANTALUM CHIP CAPACITORS
T494 SERIES—Low ESR, Industrial Grade
T494 RATINGS & PART NUMBER REFERENCE
CapaciCapacitance
tance
µF
μF
0.10
0.15
0.22
0.33
0.47
0.47
0.68
0.68
1.0
1.0
1.5
1.5
2.2
2.2
3.3
#3.3
4.7
4.7
6.8
6.8
10.0
#10.0
#10.0
15.0
15.0
#22.0
#22.0
#33.0
#33.0
†47.0
†47.0
0.10
0.15
0.15
0.22
0.33
0.47
0.47
0.68
0.68
1.0
#1.0
1.5
1.5
2.2
2.2
3.3
4.7
6.8
#6.8
#10.0
#10.0
†15.0
DC
DF %
DC
%
Leakage
@DF
+25ºC
Leakage
@
+25ºC
µA @ 25°C
120
Hz
μA Max
@ 25°C
120
MaxHz
Max
Max
35 Volt Rating at +85ºC (23 Volt Rating at +125ºC)
0.5
4.0
A
T494A104(1)035A(2)
A
T494A154(1)035A(2)
0.5
4.0
A
T494A224(1)035A(2)
0.5
4.0
A
T494A334(1)035A(2)
0.5
4.0
B
T494B474(1)035A(2)
0.5
4.0
A
T494A474(1)035A(2)
0.5
4.0
B
T494B684(1)035A(2)
0.5
4.0
A
T494A684(1)035A(2)
0.5
4.0
B
T494B105(1)035A(2)
0.5
4.0
A
T494A105(1)035A(2)
0.5
4.0
C
T494C155(1)035A(2)
0.5
6.0
B
T494B155(1)035A(2)
0.5
6.0
C
T494C225(1)035A(2)
0.8
6.0
B
T494B225(1)035A(2)
0.8
6.0
C
T494C335(1)035A(2)
1.2
6.0
B
T494B335(1)035A(2)
1.2
6.0
D
T494D475(1)035A(2)
1.7
6.0
C
T494C475(1)035A(2)
1.7
6.0
D
T494D685(1)035A(2)
2.4
6.0
C
T494C685(1)035A(2)
2.4
6.0
D
T494D106(1)035A(2)
3.5
6.0
C
T494C106M035A(2)
3.5
6.0
*V
T494V106(1)035A(2)
3.5
6.0
X
T494X156(1)035A(2)
5.3
6.0
D
T494D156(1)035A(2)
5.3
6.0
X
T494X226(1)035A(2)
7.7
6.0
D
T494D226(1)035A(2)
7.7
6.0
D
T494D336(1)035A(2)
11.6
6.0
X
T494X336(1)035A(2)
11.6
6.0
X
T494X476(1)035A(2)
16.5
8.0
E
T494E476(1)035A(2)
16.5
10.0
50 Volt Rating at +85ºC (33 Volt Rating at +125ºC)
0.5
4.0
A
T494A104(1)050A(2)
B
T494B154(1)050A(2)
0.5
4.0
A
T494A154(1)050A(2)
0.5
4.0
B
T494B224(1)050A(2)
0.5
4.0
B
T494B334(1)050A(2)
0.5
4.0
C
T494C474(1)050A(2)
0.5
4.0
B
T494B474(1)050A(2)
0.5
4.0
C
T494C684(1)050A(2)
0.5
4.0
B
T494B684(1)050A(2)
0.5
4.0
C
T494C105(1)050A(2)
0.5
4.0
V
T494V105M050A(2)
0.5
4.0
D
T494D155(1)050A(2)
0.8
6.0
C
T494C155(1)050A(2)
0.8
6.0
D
T494D225(1)050A(2)
1.1
6.0
C
T494C225(1)050A(2)
1.1
6.0
D
T494D335(1)050A(2)
1.7
6.0
D
T494D475(1)050A(2)
2.4
6.0
X
T494X685(1)050A(2)
3.5
6.0
D
T494D685(1)050A(2)
3.4
6.0
X
T494X106M050A(2)
5.0
6.0
D
T494D106(1)050A(2)
5.0
6.0
X
T494X156(1)050A(2)
7.5
6.0
Case
Case
Size
Size
KEMET
PartKEMET
Number
Part Number
ESR Ω
@ESR
+25ºC
100 kHz
Max
CAPACITOR MARKINGS
T494 Series — All Case Sizes
10.0
6.0
6.0
6.0
2.5
4.0
2.5
6.0
2.0
6.0
2.5
3.0
1.5
2.5
0.8
1.3
0.7
0.7
0.5
0.9
0.4
1.2
0.8
0.30
0.35
0.3
0.4
0.6
0.6
0.5
0.3
10.0
10.0
10.0
10.0
2.5
1.8
2.0
1.6
3.0
1.6
4.0
1.0
1.5
0.8
1.5
0.8
0.6
0.5
0.7
0.4
0.7
0.4
Polarity
Indicator (+)
(• Denotes T494)
107
10K
527
Rated
Voltage
Picofarad
Code
KEMET
I. D. Symbol
Print Week Code:
1st Digit = Y ear
2nd & 3rd Digits = Week
"527" = The 27th week of 2005
CONSTRUCTION
Negative
Termination*
Silver Adhesive
Washer
Molded
Case
Polarity
Stripe (+)
Tantalum
Wire
Tantalum
Weld
(Ta2O5)
Mn02 Coat
(First Layer)
Carbon
(Second Layer)
Silver Paint
(Third Layer)
Positive
Termination*
*100% tin
(1) To complete KEMET Part Number, insert M for ±20% tolerance or K for ±10% tolerance.
(2) To complete KEMET Part Number, insert S, H, G, or T lead material designation as shown on page 27.
*Extended Values
**6 Volt product equivalent to 6.3 volt product.
#Maximum Capacitance Change @ 125ºC=+15%.
†Maximum Capacitance Change @ 125ºC=+20%.
Higher voltage ratings and tighter tolerance product may be substituted within the same size at KEMET’s option.
Voltage substitutions will be marked with the higher voltage rating.
30
Polarity
Bevel (+)
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
Solid Tantalum Surface Mount
T495 SERIES—Low ESR, Surge Robust
FEATURES
•
•
•
•
•
•
•
•
New Extended Values for Low ESR
Low Equivalent Series Inductance (2.5nH ESL)
Precision-molded, laser-marked case
Symmetrical, compliant terminations
Taped and reeled per EIA 481-1
RoHS Compliant & Leadfree Terminations (see
www.kemet.com for lead transition)
•
Designed for very low ESR
High ripple current capability
High surge current capability
100% accelerated steady-state aging
100% Surge Current test
Meets or Exceeds EIA Standard 535BAAC
Available tested per DSCC Dwg. 95158
Operating Temperature: -55˚C to +125˚C
•
•
•
•
•
OUTLINE DRAWING
CATHODE (-) END
VIEW
SIDE VIEW
ANODE (+) END
VIEW
B
W
BOTTOM VIEW
B
H
E
K
T
P
S
X
F
S
G
A
L
Termination
cutout at
KEMET’s
Option,
either end
R
STANDARD T495 DIMENSIONS
Millimeters (Inches)
Case Size
W
H
K ±0.20
F ±0.1
S ±0.3
B ±0.15
(Ref) ±(.006)
X (Ref)
P (Ref)
R (Ref)
T (Ref)
A (Min)
G (Ref)
E (Ref)
1.6 ± 0.2
(.063 ± .008)
1.6 ± 0.2
(.063 ± .008)
0.9
(.035)
1.2
(.047)
0.8
(.031)
0.4
(.016)
0.10 ± 0.10
(.004 ± .004)
0.4
(.016)
0.4
(.016)
0.13
(.005)
1.4
(.055)
1.1
(.043)
1.3
(.051)
2.8 ± 0.2
(.110 ± .008)
1.9 ± 0.1
08)± .008)
(.075
1.1
(.043)
2.2
(.087)
0.8
(.031)
0.4
(.016)
0.10 ± 0.10
(.004 ± .004)
0.5
(.020)
1.0
(.039)
0.13
(.005)
2.1
(.083)
1.8
(.071)
2.2
(.087)
L
KEMET
EIA
A
3216-18
3.2 ± 0.2
KEMET
EIA (.126 ± .008)
3528-21 3.53.5
B B
3528-21
± 0.2
(.138 ± .008)
C
6032-28
6.0 ± 0.3
(.236 ± .012)
3.2 ± 0.3
(.126 ± .12)
2.5 ± 0.3
.098 ± .012)
1.4
(.055)
2.2
(.087)
1.3
(.051)
0.5
(.020)
0.10 ± 0.10
(.004 ± .004)
0.9
(.0235)
1.0
(.039)
0.13
(.005)
3.1
(.122)
2.8
(.110)
2.4
(.094)
D
7343-31
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
2.8 ± 0.3
(.110 ± .012)
1.5
(.059)
2.4
(.094)
1.3
(.051)
0.5
(.020)
0.10 ± 0.10
(.004 ± .004)
0.9
(.0235)
1.0
(.039)
0.13
(.005)
3.8
(.150)
3.5
(.138)
3.5
(.138)
X
7343-43
7.3 ± 0.3
(.287 ± .012)
4.3 ± 0.3
(.169 ± .012)
4.0 ± 0.3
(.157 ± .012)
2.3
(.091)
2.4
(.094)
1.3
(.051)
0.5
(.020)
0.10 ± 0.10
(.004 ± .004)
1.7
(.067)
1.0
(.039)
0.13
(.005)
3.8
(.150)
3.5
(.138)
3.5
(.138)
E
7260-38
7.3 ± 0.3
(.287 ± .012)
6.0 ± 0.3
(.236± .012)
3.6 ± 0.2
(.142 ± .008)
2.3
(.091)
4.1
(.161)
1.3
(.051)
0.5
(.020)
0.10 ± 0.10
(.004 ± .004)
0.9
(.035)
1.0
(.039)
0.13
(.005)
3.8
(.150)
3.5
(.138)
3.5
(.138)
Notes: 1. Metric dimensions govern.
2. (Ref) - Dimensions provided for reference only.
LOW PROFILE T495 DIMENSIONS
Millimeters (Inches)
CASE SIZE
COMPONENT
X
(Ref
T
(Ref)
A
(Min)
G
(Ref)
E
(Ref)
KEMET
EIA
L
W
H Max.
K Min.
F ± 0.1
S ± 0.3
T
3528-12
3.5 ± 0.2
(.138 ± .008)
2.8 ± 0.2
(.110 ± .008)
1.2
(.047)
0.3
(.012)
2.2
(.087)
0.8
(.031)
2.2
1.8
2.1
0.05 0.13
(.002) (.005) (.083) (.071) (.087)
V
7343-20
7.3 ± 0.3
4.3 ± 0.3
(.287 ± .012) (.169 ± .012)
2.0
(0.079)
0.9
(.035)
2.4
(.094)
1.3
(.051)
0.05 0.13
3.8
3.5
3.5
(.002) (.005) (.150) (.138) (.138)
Notes: 1. Metric dimensions govern.
2. (Ref) - Dimensions provided for reference only.
3. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch.
T495 Series – ORDERING INFORMATION
T
495
X
107
M
010
S
E100
ESR
Tantalum
Series
E100 = ESR in Milliohmns = 100 mOhms
E1K5 = ESR in Ohms = 1.5 Ohms
4095 = DSCC Dwg. 95158 Designator
T495 - Low ESR, Surge Robust
Lead Material
Case Size
T = 100% Tin (Sn) Plated
B,
C, D, T, V, X
A,B,C,D,X,E,T,V
Capacitance Picofarad Code
First two digits represent significant figures. Third digit
specifies number of zeros to follow.
H == Tin/Lead (SnPb % PB min)
H
5% Pb minimum)
GTin/Lead
G
= Gold(SnPb
Plated
S = Not Recommended for new design
Failure Rate
A = Not Applicable
Capacitance Tolerance
M = ±20%, K = ±10%
A
*Pb-free supply is not guaranteed with
the ‘S’ termination code.
This termination code not available
effective 15 July 2007.
See www.kemet.com for Pb Free transition information.
Voltage
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
31
SOLID TANTALUM CHIP CAPACITORS
T495 SERIES—Low ESR, Surge Robust
T495 RATINGS & PART NUMBER REFERENCE
CapaciCase
tance
Size
µF
KEMET
Part Number
DSCC Dwg.
No. 95158
Part Number
DC
DF%
ESR mΩ
Leakage
@ 25°C @ 25°C
µA @
120 Hz 100 kHz
25°C
Max
Max
Max
Ripple Current
mA rms @
25°C, 100 kHz Max
25°C
85°C
125°C
2.5 Volt Rating @ +85°C (1.7 Volt Rating at +125°C)
100.0
220.0
470.0
1000.0
1000.0
T
D
D
X
X
T495T107M2R5A(2)E3K0
2.5
24.0
3000
T495D227(1)2R5A(2)E045
5.5
8.0
45
T495D477(1)2R5A(2)E035
11.8
8.0
35
T495X108(1)2R5A(2)E030
25.0
15.0
30
T495X108(1)2R5A(2)E040
25.0
15.0
40
4 Volt Rating @ +85°C (2.7 Volt Rating at +125°C)
153
1826
2070
2345
2031
137
1643
1863
2111
1828
61
730
828
938
812
68.0
100.0
150.0
150.0
150.0
220.0
220.0
220.0
330.0
330.0
330.0
330.0
470.0
470.0
470.0
470.0
470.0
1000.0
1000.0
1000.0
1000.0
1000.0
1000.0
V
B
B
C
C
D
D
D
C
C
D
D
D
D
X
X
X
X
X
X
X
E
E
T495V686(1)004A(2)E150
2.7
6.0
T495B107(1)004A(2)E500
4.0
8.0
T495B157M004A(2) E900
6.0
12.0
T495C157(1)004A(2)E070
6.0
12.0
T495C157(1)004A(2)E250
6.0
8.0
T495D227(1)004A(2)E040
8.8
8.0
T495D227(1)004A(2)E050
8.8
8.0
T495D227(1)004A(2)E100
8.8
8.0
T495C337(1)004A(2)E300
13.2
10.0
T495C337(1)004A(2)E700
13.2
12.0
T495D337(1)004A(2)E030
13.2
8.0
T495D337(1)004A(2)E045
13.2
8.0
T495D477(1)004A(2)E045
18.8
12.0
T495D477(1)004A(2)E100
18.8
12.0
T495X477(1)004A(2)E030
18.8
8.0
T495X477(1)004A(2)E045
18.8
8.0
T495X477(1)004A(2)E100
18.8
8.0
T495X108(1)004A(2)E030
40.0
12.0
T495X108(1)004A(2)E040
40.0
12.0
T495X108(1)004A(2)E060
40.0
12.0
T495X108(1)004A(2)E070
40.0
12.0
T495E108(1)004A(2)E035
40.0
15.0
T495E108(1)004A(2)E050
40.0
15.0
6/6.3 Volt Rating @ +85°C (4 Volt Rating at +125°C)
150
500
900
70
250
40
50
100
300
700
30
45
45
100
30
45
100
30
40
60
70
35
50
913
412
307
1254
663
1936
1732
1225
606
396
2236
1826
1826
1225
2345
1915
1285
2345
2031
1658
1535
2390
2000
822
371
277
1128
597
1743
1559
1102
545
357
2012
1643
1643
1102
2111
1723
1156
2111
1828
1492
1381
2151
1800
365
165
123
501
265
775
693
490
242
159
894
730
730
490
938
766
514
938
812
663
614
956
800
47.0
47.0
47.0
68.0
68.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
470.0
470.0
470.0
470.0
470.0
470.0
470.0
470.0
470.0
470.0
1000.0
B
C
V
D
D
B
B
C
C
D
D
D
V
V
C
C
V
V
D
D
X
X
C
D
D
D
X
X
X
D
D
D
D
X
X
X
E
E
D
D
D
X
X
X
X
E
E
E
E
T495B476(1)006A(2)E450
T495C476(1)006A(2)E250
T495V476(1)006A(2)E150
T495D686(1)006A(2)E175
T495D686(1)006A(2)4095
T495B107(1)006A(2)E400
T495B107M006A(2)E700
T495C107(1)006A(2)E075
T495C107(1)006A(2)E150
T495D107(1)006A(2)E050
T495D107(1)006A(2)E130
T495D107(1)006A(2)E150
T495V107(1)006A(2)E090
T495V107(1)006A(2)E150
T495C157(1)006A(2)E050
T495C157M006A(2)E200
T495V157(1)006A(2)E040
T495V157(1)006A(2)E070
T495D157(1)006A(2)E050
T495D157(1)006A(2)E125
T495X157(1)006A(2)E100
T495X157(1)006A(2)4095
T495C227(1)006A(2)E225
T495D227(1)006A(2)E045
T495D227(1)006A(2)E100
T495D227(1)006A(2)4095
T495X227(1)006A(2)E070
T495X227(1)006A(2)E100
T495X227(1)006A(2)4095
T495D337(1)006A(2)E040
T495D337(1)006A(2)E050
T495D337(1)006A(2)E070
T495D337(1)006A(2)E100
T495X337(1)006A(2)E065
T495X337(1)006A(2)E045
T495X337(1)006A(2)E100
T495E337(1)006A(2)E060
T495E337(1)006A(2)E100
T495D477M006A(2)E045
T495D477(1)006A(2)E100
T495D477(1)006A(2)E125
T495X477(1)006A(2)E030
T495X477(1)006A(2)E045
T495X477(1)006A(2)E050
T495X477(1)006A(2)E065
T495E477(1)006A(2)E040
T495E477(1)006A(2)E055
T495E477(1)006A(2)E100
T495E108(1)006A(2)E050
450
250
150
175
175
400
700
75
150
50
130
150
90
150
50
200
40
70
50
125
100
125
225
45
100
100
70
100
100
40
50
70
100
65
45
100
60
100
45
100
125
30
45
50
65
40
55
100
50
435
663
913
926
926
461
348
1211
856
1732
1074
1000
1179
913
1483
742
1768
1336
1732
1095
1285
1150
700
1826
1225
1225
1535
1285
1285
1936
1732
1464
1225
1593
1915
1285
1826
1414
1826
1225
1095
2345
1915
1816
1593
2236
1907
1414
2000
392
597
822
833
833
415
313
1090
770
1559
967
900
1061
822
1335
668
1591
1203
1559
986
1156
1040
600
1643
1102
1102
1381
1156
1156
1743
1559
1317
1102
1434
1723
1723
1643
1273
1643
1102
986
2111
1723
1634
1434
2012
1716
1273
1800
174
265
365
370
370
184
139
484
342
693
430
400
471
365
593
297
707
535
693
438
514
460
300
730
490
490
614
514
514
775
693
586
490
637
766
766
730
566
730
490
438
938
766
726
637
894
763
566
800
95158-01(1)(2)
95158-02(1)(2)
95158-25(1)(2)
95158-03(1)(2)
3.0
2.9
3.0
3.3
3.3
6.3
6.3
6.3
6.0
6.0
6.0
6.0
6.0
6.0
9.5
9.0
9.5
9.0
9.0
9.0
7.2
7.2
13.9
13.2
13.9
13.2
13.2
13.2
13.2
20.8
20.8
20.8
20.8
19.8
19.8
19.8
20.8
20.8
29.6
29.6
29.6
28.2
28.2
28.2
28.2
29.6
29.6
29.6
63.0
6.0
6.0
6.0
4.0
4.0
15.0
15.0
8.0
8.0
6.0
6.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
6.0
6.0
6.0
6.0
10.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
8.0
12.0
12.0
12.0
10.0
10.0
10.0
10.0
12.0
10.0
10.0
15.0
Capaci- Case
tance µF Size
4.7
4.7
6.8
6.8
6.8
10.0
15.0
15.0
15.0
15.0
22.0
22.0
33.0
33.0
33.0
47.0
47.0
47.0
47.0
47.0
68.0
68.0
68.0
68.0
68.0
68.0
68.0
68.0
68.0
68.0
68.0
68.0
68.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
A
B
A
B
A
B
B
C
C
C
C
C
B
V
V
B
D
D
D
D
B
B
B
C
C
V
V
V
D
D
D
X
X
V
V
D
D
D
D
D
X
X
V
V
D
D
D
D
D
X
X
X
X
X
DC
DF%
ESR mΩ
Leakage
@ 25°C @ 25°C
µA @
120 Hz 100 kHz
25°C
Max
Max
Max
10 Volt Rating @ +85°C (7 Volt Rating at +125°C)
T495A475(1)010A(2)E1K3
0.5
6.0
1300
T495B475(1)010A(2)E1K3
0.5
15.0
1300
T495A685(1)010A(2)E1K8
0.7
6.0
1800
T495B685(1)010A(2)E900
0.7
6.0
900
T495A106(1)010A(2)E1K8
1.0
6.0
1800
T495B106(1)010A(2)E750
1.0
6.0
750
T495B156(1)010A(2)E500
1.5
6.0
500
T495C156(1)010A(2)E375
1.5
6.0
375
T495C156(1)010A(2)E400
1.5
6.0
400
T495C156(1)010A(2)E475
1.5
6.0
475
T495C226(1)010A(2)E290
2.2
6.0
290
T495C226(1)010A(2)E345
2.2
6.0
345
T495B336(1)010A(2)E450
3.3
6.0
450
T495V336(1)010A(2)E100
3.3
6.0
100
T495V336(1)010A(2)E150
3.3
6.0
150
T495B476(1)010A(2)E500
4.7
6.0
500
T495D476(1)010A(2)E080
3.8
4.0
80
T495D476(1)010A(2)E090
4.7
6.0
90
T495D476(1)010A(2)E200
3.8
4.0
200
T495D476(1)010A(2)4095 95158-04(1)(2)
3.8
4.0
200
T495B686(1)010A(2)E600
6.8
10.0
600
T495B686(1)010A(2)E750
1.5
10.0
750
T495B686M010A(2)E900
6.8
10.0
900
T495C686(1)010A(2)E070
6.8
6.0
80
T495C686(1)010A(2)E225
6.8
6.0
225
T495V686(1)010A(2)E070
6.8
6.0
70
T495V686(1)010A(2)E100
6.8
6.0
100
T495V686(1)010A(2)E140
6.8
6.0
140
T495D686(1)010A(2)E070
6.8
6.0
70
T495D686(1)010A(2)E090
6.8
6.0
90
T495D686(1)010A(2)E150
6.8
6.0
150
T495X686(1)010A(2)E150
5.4
4.0
150
T495X686(1)010A(2)4095
95158-05(1)(2)
5.4
4.0
150
T495V107(1)010A(2)E100
10.0
8.0
100
T495V107(1)010A(2)E150
10.0
8.0
150
T495D107(1)010A(2)E050
10.0
8.0
50
T495D107(1)010A(2)E065
10.0
8.0
65
T495D107(1)010A(2)E080
10.0
8.0
80
T495D107(1)010A(2)E100
10.0
8.0
100
T495D107(1)010A(2)4095 95158-06(1)(2)
10.0
8.0
100
T495X107(1)010A(2)E100
8.0
6.0
100
T495X107(1)010A(2)4095
95158-07(1)(2)
8.0
6.0
100
T495V157(1)010A(2)E100
15.0
8.0
100
T495V157M010A(2)E150
15.0
8.0
150
T495D157(1)010A(2)E050
15.0
8.0
50
T495D157(1)010A(2)E060
15.0
8.0
60
T495D157(1)010A(2)E080
15.0
8.0
80
T495D157(1)010A(2)E100
15.0
8.0
100
T495D157(1)010A(2)4095 95158-26(1)(2)
15.0
8.0
100
T495X157(1)010A(2)E070
15.0
8.0
70
T495X157(1)010A(2)E080
15.0
8.0
80
T495X157(1)010A(2)E085
15.0
8.0
85
T495X157(1)010A(2)E100
15.0
8.0
100
T495X157(1)010A(2)4095
95158-08(1)(2)
15.0
8.0
100
KEMET
Part Number
DSCC Dwg.
No. 95158
Part Number
(1) To complete KEMET part number, insert “K” for ±10% or “M” for ±20% capacitance tolerance.
(2) To complete KEMET part number, insert lead material designations per Ordering Information on page 31.
* Extended Values
Higher voltage ratings and tighter capacitance tolerance product may be substituted within the same size at KEMET’s
option. Voltage substitutions will be marked with the higher voltage rating.,
(1) To complete KEMET part number, insert "K" for ±10% or "M" for ±20% capacitance tolerance. (2) To copmplete KEMET part number, insert lead material
(designations per Ordering Information on page 31. * Extended Values
High voltage ratings and tighter capacitance tolerance product may be substituted within
(the same size at KEMET's option. Voltage substitutions will be marked with the higher voltage rating.
32
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Ripple Current mA
rms @
25°C, 100 kHz Max
25°C
85°C
125°C
240
256
204
307
204
337
412
542
524
481
616
565
435
1118
913
412
1369
1291
866
866
376
337
307
1173
700
1336
1118
945
1464
1291
1000
1049
1049
1118
913
1732
1519
1369
1220
1220
1285
1285
1118
913
1732
1581
1369
1225
1225
1535
1436
1393
1285
1285
216
230
184
277
184
303
371
487
472
433
554
508
392
1006
822
371
1232
1162
780
780
339
303
276
1055
630
1203
1006
850
1317
1162
900
944
944
1006
822
1559
1367
1232
1100
1100
1156
1156
1006
822
1559
1423
1232
1102
1102
1382
1293
1254
1156
1156
96
102
82
123
82
135
165
217
210
192
246
226
174
447
365
164
548
516
346
346
151
135
123
469
280
535
447
378
586
516
400
420
420
447
365
693
608
548
490
490
514
514
447
365
693
632
548
490
490
614
574
557
514
514
SOLID TANTALUM CHIP CAPACITORS
T495 RATINGS & PART NUMBER REFERENCE
Capaci- Case
tance µF Size
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
470.0
470.0
470.0
470.0
470.0
V
D
D
D
D
X
X
X
X
X
X
D
D
D
X
X
X
X
E
E
E
X
X
X
X
X
3.3
4.7
4.7
6.8
10.0
15.0
15.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
47.0
47.0
47.0
47.0
47.0
68.0
68.0
68.0
68.0
68.0
100.0
100.0
100.0
100.0
100.0
150.0
150.0
150.0
150.0
150.0
220.0
220.0
220.0
220.0
220.0
A
A
B
C
T
A
B
C
C
C
D
D
D
D
C
D
D
D
D
V
V
D
D
D
D
D
X
X
X
D
D
D
X
X
X
E
E
E
E
DC
DF%
ESR mΩ
Leakage
@ 25°C @ 25°C
µA @
120 Hz 100 kHz
25°C
Max
Max
Max
10 Volt Rating @ +85°C (7 Volt Rating at +125°C) cont.
T495V227(1)010A(2)E150
22.0
12.0
150
T495D227(1)010A(2)E045
22.0
8.0
45
T495D227(1)010A(2)E075
22.0
8.0
75
T495D227(1)010A(2)E100
22.0
8.0
100
T495D227(1)010A(2)E125
22.0
8.0
125
T495X227(1)010A(2)E045
22.0
8.0
45
T495X227(1)010A(2)E050
22.0
8.0
50
T495X227(1)010A(2)E060
22.0
8.0
60
T495X227(1)010A(2)E070
22.0
8.0
70
T495X227(1)010A(2)E100
22.0
8.0
100
T495X227(1)010A(2)4095
95158-28(1)(2)
15.0
8.0
100
T495D337(1)010A(2)E100
33.0
8.0
100
T495D337(1)010A(2)E125
33.0
10.0
125
T495D337(1)010A(2)E150
33.0
10.0
150
T495X337(1)010A(2)E035
33.0
10.0
35
T495X337(1)010A(2)E050
33.0
10.0
50
T495X337(1)010A(2)E060
33.0
10.0
60
T495X337(1)010A(2)E100
33.0
10.0
100
T495E337(1)010A(2)E040
33.0
8.0
40
T495E337(1)010A(2)E060
33.0
10.0
60
T495E337(1)010A(2)E100
33.0
10.0
100
T495X477M010A(2)E045
47.0
10.0
45
T495X477M010A(2)E050
47.0
10.0
50
T495X477M010A(2)E060
47.0
10.0
60
T495X477M010A(2)E100
47.0
10.0
100
T495X477M010A(2)E200
47.0
10.0
200
16 Volt Rating @ +85°C (10 Volt Rating at +125°C)
T495A335(1)016A(2)E3K0
0.5
6.0
3000
T495A475(1)016A(2)E2K0
0.8
6.0
2000
T495B475(1)016A(2)E700
0.8
6.0
700
T495C685(1)016A(2)E750
1.1
6.0
750
T495T106M016A(2)E4K0
1.6
8.0
4000
T495A156(1)016A(2)E2K5
2.4
8.0
2500
T495B156(1)016A(2)E800
2.4
6.0
800
T495C336(1)016A(2)E200
5.3
6.0
200
T495C336(1)016A(2)E225
5.3
6.0
225
T495C336(1)016A(2)E275
5.3
6.0
275
T495D336(1)016A(2)E150
6.6
6.0
150
T495D336(1)016A(2)E175
5.3
6.0
175
T495D336(1)016A(2)E225
4.2
4.0
225
T495D336(1)016A(2)4095 95158-09(1)(2)
4.2
4.0
250
T495C476(1)016A(2)E350
7.5
6.0
350
T495D476(1)016A(2)E080
7.5
6.0
80
T495D476(1)016A(2)E100
7.5
6.0
100
T495D476(1)016A(2)E150
7.5
6.0
150
T495D476(1)016A(2)4095 95158-10(1)(2)
7.5
6.0
200
T495V686(1)016A(2)E180
10.9
6.0
180
T495V686(1)016A(2)E300
10.9
6.0
300
T495D686(1)016A(2)E070
10.9
6.0
70
T495D686(1)016A(2)E100
10.9
6.0
100
T495D686(1)016A(2)E150
10.9
6.0
150
T495D107(1)016(2)E100
16.0
8.0
100
T495D107(1)016A(2)E125
16.0
8.0
125
T495X107(1)016A(2)E080
16.0
8.0
80
T495X107(1)016A(2)E100
16.0
8.0
100
T495X107(1)016A(2)4095
95158-11(1)(2)
16.0
8.0
125
T495D157M016A(2)E100
24.0
8.0
100
T495D157M016A(2)E125
24.0
8.0
125
T495D157M016A(2)E150
24.0
8.0
150
T495X157(1)016A(2)E075
24.0
8.0
75
T495X157(1)016A(2)E100
24.0
8.0
100
T495X227(1)016A(2)E100
35.2
8.0
100
T495E227(1)016A(2)E050
35.2
12.0
50
T495E227(1)016A(2)E075
35.2
8.0
75
T495E227(1)016A(2)E100
35.2
7.2
100
T495E227(1)016A(2)E150
35.2
7.2
150
KEMET
Part Number
DSCC Dwg.
No. 95158
Part Number
Ripple Current mA
rms @
25°C, 100 kHz Max
25°C
85°C
125°C
913
1826
1414
1225
1095
1915
1817
1658
1535
1285
1285
1227
1095
1000
2171
1817
1658
1284
2236
1826
1414
1915
1817
1658
1284
908
822
1643
1273
1102
986
1723
1635
1492
1382
1156
1156
1102
986
900
1954
1635
1492
1156
2012
1643
1273
1723
1635
1492
1156
817
365
730
566
490
438
766
727
663
614
514
514
490
438
400
868
727
663
513
894
730
566
766
727
663
513
363
158
194
348
383
132
173
326
742
699
632
1000
926
816
770
561
1369
1225
1000
870
833
645
1464
1225
1000
1225
1095
1436
1285
1149
1224
1095
1000
1483
1285
1284
2000
1632
1414
1155
142
174
313
345
119
156
293
667
629
569
900
833
735
700
505
1232
1102
900
780
750
581
1317
1102
900
1102
986
1293
1156
1034
1102
985
900
1335
1156
1156
1800
1469
1273
1039
63
77
139
153
53
69
130
297
280
253
400
370
327
310
224
547
490
400
345
333
258
586
490
400
490
438
574
514
460
489
438
400
593
514
513
800
652
566
462
Capaci- Case
tance µF Size
1.0
10.0
10.0
10.0
15.0
15.0
15.0
22.0
22.0
22.0
33.0
33.0
33.0
47.0
47.0
47.0
47.0
47.0
47.0
47.0
47.0
68.0
68.0
68.0
68.0
68.0
100.0
100.0
100.0
100.0
100.0
150.0
A
B
C
C
C
D
D
D
D
D
D
D
D
D
D
D
X
X
X
X
X
D
D
X
X
X
X
X
E
E
E
E
0.47
2.2
3.3
4.7
6.8
6.8
6.8
6.8
10.0
10.0
10.0
15.0
15.0
15.0
15.0
22.0
22.0
22.0
22.0
22.0
22.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
33.0
47.0
47.0
47.0
47.0
47.0
47.0
A
C
C
C
B
C
C
C
C
C
C
D
D
X
X
C
C
*C
D
X
X
D
D
D
D
X
X
X
X
X
X
X
X
D
D
KEMET
Part Number
DSCC Dwg.
No. 95158
Part Number
DC
DF%
ESR mΩ
Leakage
@ 25°C @ 25°C
µA @
120 Hz 100 kHz
25°C
Max
Max
Max
20 Volt Rating @ +85°C (13 Volt Rating at +125°C)
T495A105(1)020A(2)E3K0
0.2
4.0
3000
T495B106(1)020A(2)E1K0
2.0
6.0
1000
T495C106(1)020A(2)E400
2.0
6.0
400
T495C106(1)020A(2)E475
2.0
6.0
475
T495C156(1)020A(2)E375
3.0
6.0
375
T495D156(1)020A(2)E275
2.4
4.0
275
T495D156(1)020A(2)4095 95158-12(1)(2)
2.4
4.0
275
T495D226(1)020A(2)E180
3.5
4.0
180
T495D226(1)020A(2)E225
3.5
4.0
225
T495D226(1)020A(2)4095 95158-13(1)(2)
3.5
4.0
275
T495D336(1)020A(2)E100
6.6
6.0
100
T495D336(1)020A(2)E150
6.6
6.0
150
T495D336(1)020A(2)E200
6.6
6.0
200
T495D476(1)020A(2)E075
9.4
6.0
75
T495D476(1)020A(2)E100
9.4
6.0
100
T495D476(1)020A(2)E175
9.4
6.0
175
T495X476(1)020A(2)E065
9.4
8.0
65
T495X476(1)020A(2)E100
9.4
6.0
100
T495X476(1)020A(2)E125
9.4
6.0
125
T495X476(1)020A(2)E150
7.5
4.0
150
T495X476(1)020A(2)4095
95158-14(1)(2)
7.5
4.0
150
T495D686(1)020A(2)E070
13.6
8.0
70
T495D686(1)020A(2)E150
13.6
8.0
150
T495X686(1)020A(2)E120
13.6
6.0
120
T495X686(1)020A(2)E150
13.6
6.0
150
T495X686(1)020A(2)4095
95158-15(1)(2)
13.6
6.0
150
T495X107(1)020A(2)E100
20.0
6.0
100
T495X107(1)020A(2)E150
20.0
8.0
150
T495E107(1)020A(2)E085
20.0
8.0
85
T495E107(1)020A(2)E100
20.0
8.0
100
T495E107(1)020A(2)E200
20.0
8.0
200
T495E157(1)020A(2)E080
30.0
8.0
80
25 Volt Rating @ +85°C (17 Volt Rating at +125°C)
T495A474(1)025A(2)E4K5
0.5
4.0
4500
T495C225(1)025A(2)E1K3
0.6
6.0
1300
T495C335(1)025A(2)E750
0.9
6.0
750
T495C475(1)025A(2)E575
1.2
6.0
575
T495B685(1)025A(2)E1K5
1.7
6.0
1500
T495C685(1)025A(2)E400
1.7
6.0
400
T495C685(1)025A(2)E490
1.7
6.0
490
T495C685(1)025A(2)E500
1.7
6.0
500
T495C106(1)025A(2)E275
2.5
6.0
275
T495C106(1)025A(2)E300
2.5
6.0
300
T495C106(1)025A(2)E450
2.5
6.0
450
T495D156(1)025A(2)E275
3.8
6.0
275
T495D156(1)025A(2)4095 95158-16(1)(2)
3.8
6.0
275
T495X156(1)025A(2)E200
3.0
4.0
200
T495X156(1)025A(2)4095
95158-17(1)(2)
3.0
4.0
200
T495C226(1)025A(2)E275
5.5
6.0
275
T495C226(1)025A(2)E300
5.5
8.0
300
T495C226(1)025A(2)E900
5.5
6.0
900
T495D226(1)025A(2)E200
5.5
6.0
200
T495X226(1)025A(2)E225
4.4
4.0
225
T495X226(1)025A(2)4095
95158-18(1)(2)
4.4
4.0
225
T495D336(1)025A(2)E090
8.3
6.0
90
T495D336(1)025A(2)E100
8.3
6.0
100
T495D336(1)025A(2)E225
8.3
6.0
225
T495D336(1)025A(2)E300
8.3
6.0
300
T495X336(1)025A(2)E100
8.3
4.0
100
T495X336(1)025A(2)E175
6.6
4.0
175
T495X336(1)025A(2)E200
8.3
4.0
200
T495X336(1)025A(2)4095
95158-19(1)(2)
6.6
4.0
175
T495X476M025A(2)E080
11.8
8.0
80
T495X476M025A(2)E150
11.8
6.0
150
T495X476M025A(2)E185
16.5
8.0
185
T495X476M025A(2)E200
11.8
6.0
200
T495D476M025(2)E120
11.8
10.0
120
T495D476(1)025(2)E250
11.8
10.0
250
Ripple Current mA
rms @
25°C, 100 kHz Max
25°C
85°C
125°C
158
292
524
481
542
738
738
913
816
739
1225
1000
866
1414
1225
926
1593
1285
1149
1049
1049
1464
1000
1173
1049
1049
1285
1049
1534
1414
1000
1581
142
262
472
433
487
665
665
822
735
665
1102
900
780
1272
1102
833
1434
1156
1034
944
944
1317
900
1055
944
944
1156
944
1381
1273
900
1423
63
117
210
192
217
295
295
365
326
295
490
400
346
565
490
370
637
514
460
420
420
586
400
469
420
420
514
420
614
566
400
632
129
291
383
437
238
524
474
469
632
606
494
738
738
908
908
632
606
350
866
856
856
1291
1225
816
707
1285
971
908
971
1436
1049
944
908
1118
775
116
262
345
394
214
472
426
422
569
545
445
665
665
817
817
569
545
315
780
771
771
1162
1102
735
636
1156
874
817
874
1293
944
850
817
1006
697
52
116
153
175
95
210
190
188
253
242
198
295
295
363
363
253
242
140
346
343
343
516
490
327
283
514
388
363
388
574
420
378
363
447
310
(1) To complete KEMET part number, insert “K” for ±10% or “M” for ±20% capacitance tolerance.
(2) To complete KEMET part number, insert lead material designations per Ordering Information on page 31.
* Extended Values
Higher voltage ratings and tighter capacitance tolerance product may be substituted within the same size at KEMET’s
option. Voltage substitutions will be marked with the higher voltage rating.,
CAPACITOR ALTERNATE MARKINGS
B Case Size
A Case Size
Polarity
Indicator
(+)
KEMET
MnO2
Lot
Code
Polarity
Indicator
(+)
KEMET
MnO2
Voltage
Voltage
Picofarad
Code
Date Code - Year
S = 2004
V = 2007 1 = January
Date
Code
157
6V
Picofarad
Code
Date
Code
C,D,X Case Size
K
A 157
V5 49
Lot
Code
Voltage
Polarity
Indicator
(+)
KEMET
MnO2
157
K 10V
V5 49
K
Date
Code
A Case Size
Voltage Code
G
4
J
6.3
A
10
C
16
D
20
E
25
V
35
T
50
V5
Date Code - Month
4 = April 7 = July
49
Picofarad
Code
Lot Code
10 = October
T = 2005 tolerance.
W = 2008 (2)2 To
= February
= May part
8 =number,
August insert11
= November
(1) To complete KEMET part number, insert "K" for ±10% or "M" for ±20% capacitance
copmplete5 KEMET
lead
material
(designations per Ordering Information on page 31. * Extended Values UHigh
voltageXratings
capacitance
tolerance
product may12
be=substituted
= 2006
= 2009and3tighter
= March
6 = June
9 = September
Decemberwithin
(the same size at KEMET's option
0
D
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
33
Solid Tantalum Surface Mount
T495 SERIES—Low ESR, Surge Robust
SOLID TANTALUM CHIP CAPACITORS
T495 SERIES—Low ESR, Surge Robust
T495 RATINGS & PART NUMBER REFERENCE
Capaci- Case
tance µF Size
68.0
68.0
68.0
100.0
X
X
X
E
0.47
0.47
1.0
1.0
1.0
2.2
2.2
3.3
3.3
3.3
3.3
4.7
4.7
4.7
4.7
4.7
6.8
6.8
6.8
6.8
10.0
10.0
10.0
10.0
10.0
10.0
10.0
10.0
15.0
15.0
15.0
15.0
15.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
22.0
33.0
33.0
33.0
47.0
47.0
47.0
B
B
A
B
B
B
C
B
C
C
C
B
C
C
C
C
D
D
X
X
D
D
D
D
X
X
X
X
D
D
X
X
X
D
D
D
D
X
X
X
X
X
X
X
X
X
X
1.0
2.2
3.3
4.7
4.7
4.7
4.7
6.8
6.8
6.8
6.8
10.0
10.0
10.0
15.0
15.0
C
D
D
D
D
X
X
D
D
D
D
X
X
X
X
X
DC
DF%
ESR mΩ
Leakage
@ 25°C @ 25°C
µA @
120 Hz 100 kHz
25°C
Max
Max
Max
25 Volt Rating @ +85°C (17 Volt Rating at +125°C)
T495X686(1)025A(2)E125
17.0
8.0
125
T495X686(1)025A(2)E150
17.0
8.0
150
T495X686(1)025A(2)E200
17.0
8.0
200
T495E107(1)025A(2)E100
25.0
8.0
100
35 Volt Rating @ +85°C (23 Volt Rating at +125°C)
T495B474(1)035A(2)E1K5
0.5
4.0
1500
T495B474(1)035A(2)E2K2
0.5
4.0
2200
T495A105(1)035A(2)E3K0
0.4
4.0
3000
T495B105(1)035A(2)E1K5
0.5
4.0
1500
T495B105(1)035A(2)E1K7
0.5
4.0
1700
T495B225(1)035A(2)E1K5
0.8
6.0
1500
T495C225(1)035A(2)E750
0.8
6.0
750
T495B335(1)035A(2)E900
1.2
6.0
900
T495C335(1)035A(2)E525
1.1
6.0
525
T495C335(1)035A(2)E550
1.1
6.0
550
T495C335(1)035A(2)E600
1.2
6.0
600
T495B475(1)035A(2)E1K0
1.6
6.0
1000
T495C475(1)035A(2)E450
1.7
6.0
450
T495C475(1)035A(2)E500
1.7
6.0
500
T495C475(1)035A(2)E600
1.7
6.0
600
T495C475(1)035A(2)4095 95158-29(1)(2)
1.7
6.0
600
T495D685(1)035A(2)E150
2.4
6.0
150
T495D685(1)035A(2)E400
2.4
6.0
400
T495X685(1)035A(2)E300
1.9
4.0
300
T495X685(1)035A(2)4095
95158-20(1)(2)
1.9
4.0
300
T495D106(1)035A(2)E125
3.5
6.0
125
T495D106(1)035A(2)E250
3.5
6.0
250
T495D106(1)035A(2)E300
3.5
6.0
300
T495D106(1)035A(2)4095 95158-27(1)(2)
3.5
4.0
300
T495X106(1)035A(2)E175
3.5
6.0
175
T495X106(1)035A(2)E200
3.5
6.0
200
T495X106(1)035A(2)E250
2.8
4.0
250
T495X106(1)035A(2)4095
95158-21(1)(2)
2.8
4.0
250
T495D156(1)035A(2)E225
5.3
6.0
225
T495D156(1)035A(2)E300
5.3
6.0
300
T495X156(1)035A(2)E200
5.3
6.0
200
T495X156(1)035A(2)E225
5.3
6.0
225
T495X156(1)035A(2)4095
95158-22(1)(2)
5.3
6.0
225
T495D226(1)035A(2)E125
7.7
6.0
125
T495D226(1)035A(2)E200
7.7
6.0
200
T495D226(1)035A(2)E250
7.7
6.0
250
T495D226(1)035A(2)E300
7.7
6.0
300
T495X226(1)035A(2)E125
7.7
6.0
125
T495X226(1)035A(2)E200
7.7
6.0
200
T495X226(1)035A(2)E275
7.7
6.0
275
T495X226(1)035A(2)4095
95158-23(1)(2)
7.7
6.0
300
T495X336(1)035A(2)E100
11.6
6.0
100
T495X336(1)035A(2)E175
11.6
6.0
175
T495X336(1)035A(2)E250
11.6
6.0
250
T495X476(1)035A(2)E185
16.5
8.0
185
T495X476(1)035A(2)E200
16.5
8.0
200
T495X476(1)035A(2)E300
16.5
8.0
300
50 Volt Rating @ +85°C (33 Volt Rating at +125°C)
T495C105(1)050A(2)E1K3
0.5
4.0
1300
T495D225(1)050A(2)E600
1.1
6.0
600
T495D335(1)050A(2)E700
1.7
6.0
700
T495D475(1)050A(2)E275
2.4
6.0
275
T495D475(1)050A(2)E300
2.4
6.0
300
T495X475(1)050A(2)E300
1.9
4.0
300
T495X475(1)050A(2)4095
95158-24(1)(2)
1.9
4.0
300
T495D685(1)050A(2)E190
3.4
6.0
190
T495D685(1)050A(2)E200
3.4
6.0
200
T495D685(1)050A(2)E275
3.4
6.0
275
T495D685(1)050A(2)E300
3.4
8.0
300
T495X106(1)050A(2)E250
5.0
8.0
250
T495X106(1)050A(2)E260
5.0
6.0
260
T495X106(1)050A(2)E300
5.0
6.0
300
T495X156(1)050A(2)E200
7.5
8.0
200
T495X156(1)050A(2)E300
7.5
8.0
300
KEMET
Part Number
DSCC Dwg.
No. 95158
Part Number
Ripple Current mA
rms @
25°C, 100 kHz Max
25°C
85°C
125°C
1149
1049
908
1414
1034
944
817
1273
460
420
363
566
238
197
158
238
224
238
383
307
457
447
428
292
494
469
428
428
1000
612
742
742
1095
775
707
707
971
908
812
812
816
707
908
856
856
1095
866
775
707
1149
908
775
742
1285
971
812
944
908
742
214
177
142
214
201
214
345
276
411
402
385
262
445
422
385
385
900
551
667
667
986
697
636
636
874
817
731
731
735
636
817
771
771
985
779
697
636
1034
817
697
667
1156
874
731
850
817
667
95
79
63
95
89
95
153
123
182
178
171
117
198
188
171
171
400
245
297
297
438
310
283
283
388
363
325
325
327
283
363
343
343
438
346
310
283
460
363
410
297
514
388
325
378
363
297
291
500
463
739
707
742
742
888
866
739
700
774
796
741
908
742
262
450
417
665
636
667
667
799
779
665
600
697
716
667
817
667
116
200
185
295
283
297
297
355
346
295
300
309
318
297
363
297
(1) To complete KEMET part number, insert “K” for ±10% or “M” for ±20% capacitance tolerance.
(2) To complete KEMET part number, insert lead material designations per Ordering Information on page 31.
*Extended Values
Higher voltage ratings and tighter capacitance tolerance product may be substituted within the
same size at KEMET’s option.Voltage substitutions will be marked with the higher voltage rating.
CONSTRUCTION
Negative
Termination*
Silver Adhesive
Washer
Molded
Case
Polarity
Stripe (+)
CAPACITOR MARKINGS
Polarity
Bevel (+)
Low
ESR
Device
Tantalum
Wire
Rated
Voltage
Tantalum
Weld
(Ta2O5)
Mn02 Coat
(First Layer)
Carbon
(Second Layer)
Silver Paint
(Third Layer)
34
Positive
Termination*
*100% tin
R+
107
10K
527
Polarity
Indicator (+)
(Solid Stripe)
Picofarad
Code
KEMET
I. D. Symbol
Print Week Code:
1st Digit = Y ear
2nd & 3rd Digits = Week
"527" = The 27th week of 2005
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
Solid Tantalum Surface Mount
T495 SERIES—Low ESR, Surge Robust
T495 TANTALUM CHIP CAPACITANCE VALUES
Case Size and Max. ESR (mΩ
Ω ) by Capacitance & Voltage
Standard Capacitance V alues
Capacitance
µF
Code
Rated Voltage @ +85°C
2.5
4
6
10
16
0.47
474
1.0
105
2.2
225
A,1800
3.3
335
A,3000
20
25
35
A,4500
B,1500
B,2200
50
A,3000
B,1500
B,1700
C,1300
C,1300
B,1500
C,750
D,600
C,750
B,900
C,525,550,600
D,700
D,275,300
X,300
A,3000
4.7
475
A,1300
B,1300
A,2000
B,700
C,575
B,1000
C,450,500
C,600
6.8
685
A,1800
B,900
C,750
B,1500
C,400,490,50
0
D,400
X,300
D,190,200,27
5
D,300
10.0
106
A,1800
B,750
B,1000
C,400,475
B,750
C,450
D,120,125,250D
,300
X,175,200
X,250
X,250,300
15.0
156
B,500
C,375,400,
475
A,2500
B,800
C,375
D,275
D,275
X,200
C,350
D,225,300
X,200,225
X,300
22.0
226
B,500
C,290,345
B,600
D,180,225
D,275
C, 300,900
D,200
X,225
D,125,200,250
D300
X,125,200,275,
300
33.0
336
B,450
V,100,150
C,200,225,
275
D,150,175,
D,225,250
D,90,100
D,225,300
X,100,175
D,300
X,100,175,250
47.0
476
B,450
C,250
V,150
B, 500
D,80,90,
200
C,350
D,100,150,
200
V,150
D,175
V,70,100,140
B,600,750
B,900
C,80,225
D,90,150
X,150
V,180,300
D,150
D,70,150
X,120,150
X,125,150
200
B,500
V,90,150
B,400,700
C,75,150
D,150
C,100
V,100,150
D,50,65, 80,100
X,100
D,100,125
X,80,100,
125
X,150
E,85,100
200
E,100
B,900
C.70,250
V,40,70
C,50,200
X,100,125
C,200
D,100,125,15
D,50,60,80,100
0
X,70,80,85,100
X,75,100
V,100,150
68.0
686
100.0
107
150.0
157
220.0
227
330.0
337
470.0
477
680.0
687
A,900
T, 3000
C,225
D,45,100
X,70,100
V,150
D,45,75
D,100,125
X, 45,50,60,
70,100
C,300,700
D,30,45
X,45,65,
X,100
D,40,50,70,
D,100
E,40,60,100
D,100,125
X,35,50,60
E,40,60,100
D,45,100
X,30,45,100
X,30,45,50,
X,65
D,45,100,125
E,40,55,100
X,45,50
D,45
D,35
A,1700
T,4000
D,100,150
200
D,75,100,175
D,120,250
X,65,100
X,80,150,185,
X,125,150
200
X,185,200,
300
E,80
X,100
E,50,100,150
Note that standard values are preferred, especially where high surge currents are possible.
Extended values are
available to increase capacitance and reduce ESR. Note that standard
X,30,40,60,70
1000.0
108
X,30,40
CV values
demonstrate
inherentlyE,50
lower failure rates than extended CV values, especially in
E,35,50
low impedance applications.
Note that standard values are preferred, especially where high surge currents are possible.Extended values
are available to increase capacitance and reduce ESR. Note that standard CV values demonstrate inherently
lower failure rates than extended CV values, especially in low impedance applications.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300D
35
SOLID TANTALUM CHIP CAPACITORS
T496 SERIES—Fail-Safe Fused
FEATURES
•
•
•
•
•
•
•
•
Built-in fuse protects against damaging short
circuit failure mode
Precision-molded, laser-marked case
Symmetrical, compliant terminations
Taped and reeled per EIA 481-1
Case geometry and footprints equivalent to
Industrial Grade T491 Series. (Case sizes
B, C, D and X only)
100% Surge Current test on C, D, X sizes
Patented fuse assembly
Operating Temperature: -55˚C to +125˚C
Fuse actuation, 25⬚C: within 1 second at fault
currents of 4 amps and higher.
Continuous current capability: 0.75 amps
Post-actuation resistance,
25⬚C: 10 megohms minimum
Test tabs on the sides of the case bypass the
capacitor element to allow direct testing of the
fuse assembly.
RoHS Compliant & Leadfree Terminations (See
www.kemet.com for lead transition)
•
•
•
•
•
OUTLINE DRAWINGS
CATHODE (-) END
VIEW
SIDE VIEW
ANODE (+) END
VIEW
B
W
Test Tab
0.15(0.006) Max.
H
K
B
E
T
S
X
BOTTOM VIEW
F
P
S
G
R
A
L
Termination
cutout at
KEMET’s
Option,
either end
DIMENSIONS — Millimeters (Inches)
CASE SIZE
KEMET
EIA
B
3528-21
C
6032-28
D
7343-31
X
7343-43
H
±
±
±
10
(.1
(.287 ± .012) (.169 ±
± .012)
± 0.20
K ± (.008)
± 0.1
1.1
(.043)
1.4
(.055)
1.5
(.059)
2.3
(.091)
2.2
(.087)
2.2
(.087)
2.4
(.094)
2.4
(.094)
S
± 0.3
0.8
(.031)
1.3
(.051)
1.3
(.051)
1.3
(.051)
± 0.15
B
(Ref) ±
(.016)
0.5
(.020)
0.5
(.020)
0.5
(.020)
X
(Ref)
±
(.004
P
(Ref)
R
1.0
1.0
1.0
A
G
E
T
(Ref) (Min) (Ref) (Ref)
2.1
1.8
2.2
(.083) (.071) (.087)
2.8
(.1
(.094)
3.5
(.138)
1.0
(.004 ±
(.067)
(.005) (.150) (.138) (.138)
Notes: 1. Metric dimensions govern.
2. (Ref) - Dimensions provided for reference only.
* Round glue pad: 2.9 ± 0.1mm (.114" ± .004") in diameter at KEMET’s option.
T496 Series – ORDERING INFORMATION
T 496 B 105 M 025 A S
Lead Material
Tantalum
Series
T - 100% Sn (Tin) Plated
H - Tin/Lead (SnPb - 5% Pb minimum)
Not
recommended
for new designs
**S
“S”- =
Not
Recommended
T496 - Precision Molded, Fail-safe
Failure Rate
Case Size
A - Not Applicable
B, C, D, X
Voltage
Capacitance Picofarad Code
Capacitance Tolerance
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
*Part number
example:
T496B105M025AT
(14 digits - no(14
spaces).
See www.kemet.com
Part
Number
Example:
T496B105M025AS
digits
no spa es) for Pb Free transition.
** “S” Termination codes are converting from 90Sn/10 Pb to 100% tin finishes. Orders including “S” suffix
termination codes do not quarantee Pb-free product.
TYPICAL FUSE ACTUATION PROFILE
M - ± 20%
K - ± 10%
*Pb-free supply is not guaranteed with
the ‘S’ termination code.
This termination code not available
effective 15 July 2007.
Current (Amps)
10
1
.0001
.001
.01
.1
1
10
Time (Seconds)
36
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
SOLID TANTALUM CHIP CAPACITORS
Solid Tantalum Surface Mount
T496 SERIES—Fail-Safe Fused
T496 RATINGS & PART NUMBER REFERENCE
Capaci- Case
tance µF Size
KEMET
Part Number
DCL µA
@ 25°C
Max.
DF%
@ +25°C
120 Hz.
Max.
68.0
68.0
100.0
150.0
150.0
220.0
220.0
#330.0
#330.0
330.0
#470.0
C
C
C
D
C
D
D
D
D
X
X
4.7
6.8
10.0
15.0
22.0
22.0
22.0
33.0
33.0
47.0
47.0
47.0
#68.0
68.0
100.0
100.0
100.0
100.0
#100
150.0
150.0
150.0
220.0
220.0
#220.0
#220.0
#330.0
#330.0
B
B
B
C
B
B
C
C
C
C
C
D
C
D
X
X
D
D
C
X
D
D
X
X
D
D
X
X
4 Volt Rating at +85°C (2.7 Volt Rating at +125°C)
2.7
6.0
T496C686(1)004A(2) E1K6
T496C686(1)004A(2) E400
2.7
6.0
T496C107(1)004A(2) E1K2
4.0
8.0
T496D157(1)004A(2) E800
6.0
8.0
T496C157(1)004A(2) E1K2
6.0
8.0
T496D227(1)004A(2) E700
8.8
8.0
T496D227(1)004A(2) E400
8.8
8.0
T496D337(1)004A(2) E700
13.2
8.0
T496D337(1)004A(2) E400
13.2
8.0
T496X337(1)004A(2) E700
13.2
8.0
T496X477(1)004A(2) E500
18.8
8.0
**6 Volt Rating at +85°C (4 Volt Rating at +125°C)
T496B475(1)006A(2) E3K5
0.5
6.0
T496B685(1)006A(2) E3K5
0.5
6.0
T496B106(1)006A(2) E3K5
0.6
6.0
T496C156(1)006A(2) E2K0
0.9
6.0
T496B226(1)006A(2) E3K5
1.3
6.0
T496B226(1)006A(2) E1K5
1.3
6.0
T496C226(1)006A(2) E2K0
1.4
6.0
T496C336(1)006A(2) E2K0
2.0
6.0
T496C336(1)006A(2) E600
2.0
6.0
T496C476(1)006A(2) E1K6
2.9
6.0
T496C476(1)006A(2) E600
2.9
6.0
T496D476(1)006A(2) E1K0
2.9
6.0
T496C686(1)006A(2) E1K2
4.1
6.0
T496D686(1)006A(2) E1K0
4.1
6.0
T496X107(1)006A(2) E900
6.0
8.0
T496X107(1)006A(2) E300
6.0
8.0
T496D107(1)006A(2) E800
6.0
8.0
T496D107(1)006A(2) E400
6.0
8.0
T496C107(1)006A(2) E400
6.0
8.0
T496X157(1)006A(2) E300
9.0
8.0
T496D157(1)006A(2) E700
9.0
8.0
T496D157(1)006A(2) E300
9.0
8.0
T496X227(1)006A(2) E700
13.2
8.0
T496X227(1)006A(2) E300
13.2
8.0
T496D227(1)006A(2) E700
13.2
8.0
T496D227(1)006A(2) E300
13.2
8.0
T496X337(1)006A(2) E500
19.8
8.0
T496X337(1)006A(2) E300
19.8
8.0
3.3
4.7
6.8
10.0
15.0
15.0
15.0
22.0
22.0
33.0
33.0
33.0
33.0
B
B
B
C
B
C
C
C
C
D
D
C
C
10 Volt Rating at +85°C (7 Volt Rating at + 125°C)
0.5
6.0
T496B335(1)010A(2) E3K5
T496B475(1)010A(2) E3K5
0.5
6.0
T496B685(1)010A(2) E3K5
0.7
6.0
T496C106(1)010A(2) E2K0
1.0
6.0
T496B156(1)010A(2) E3K5
1.5
6.0
T496C156(1)010A(2) E2K0
1.5
6.0
T496C156(1)010A(2) E600
1.5
6.0
T496C226(1)010A(2) E2K0
2.2
6.0
T496C226(1)010A(2) E500
2.2
6.0
T496D336(1)010A(2) E1K0
3.3
6.0
T496D336(1)010A(2) E400
3.3
6.0
T496C336(1)010A(2) E1K6
3.3
6.0
T496C336(1)010A(2) E400
3.3
6.0
ESR Ω
@ +25°C
100 kHz
Max.
1.6
0.4
1.2
0.8
1.2
0.7
0.4
0.7
0.4
0.7
0.5
3.5
3.5
3.5
2.0
3.5
1.5
2.0
2.0
0.6
1.6
0.6
1.0
1.2
1.0
0.9
0.3
0.8
0.4
0.4
0.3
0.7
0.3
0.7
0.3
0.7
0.3
0.5
0.3
3.5
3.5
3.5
2.0
3.5
2.0
0.6
2.0
0.5
1.0
0.4
1.6
0.4
Negative
Termination*
Silver Adhesive
Washer
Polarity
Stripe (+)
47.0
47.0
#47.0
#47.0
68.0
68.0
68.0
100.0
100.0
100.0
150.0
150.0
#150.0
#150.0
#220.0
#220.0
#220.0
2.2
3.3
3.3
4.7
4.7
6.8
6.8
10.0
10.0
10.0
15.0
15.0
22.0
22.0
22.0
22.0
33.0
33.0
47.0
47.0
47.0
47.0
100.0
KEMET
Part Number
Polarity
Bevel (+)
Weld
Mn02 Coat
(First Layer)
Carbon
Positive
Termination*
(Second Layer)
Silver Paint
(Third Layer)
Tantalum
Wire
*100% Tin
ESR Ω
@ +25°C
100 kHz
Max.
1.0
0.4
1.2
0.4
0.9
0.8
0.4
0.4
0.7
0.4
0.7
0.4
0.7
0.4
0.5
0.3
0.3
3.5
3.5
2.1
3.5
1.6
2.0
0.6
3.5
2.0
0.7
2.0
0.6
1.0
0.5
1.6
1.0
1.0
0.4
0.9
0.4
0.8
0.4
0.7
(1) To complete KEMET Part Number, insert M for ±20% tolerance or K for
±10% tolerance.
(2) To complete KEMET Part Number, insert lead material designation for
Ordering Information on page 36.
Higher voltage ratings and tighter capacitance tolerance product may
be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating.
Fused
Fail-Safe
Device
Rated
Voltage
(Ta2O5)
DF%
@ +25°C
120 Hz.
Max.
10 Volt Rating at +85°C (7 Volt Rating at +125°C) cont.
4.7
6.0
D
T496D476(1)010A(2) E1K0
D
T496D476(1)010A(2) E400
4.7
6.0
C
T496C476(1)010A(2) E1K2
4.7
6.0
C
T496C476(1)010A(2) E400
4.7
6.0
X
T496X686(1)010A(2) E900
6.8
6.0
D
T496D686(1)010A(2) E800
6.8
6.0
D
T496D686(1)010A(2) E400
6.8
6.0
X
T496X107(1)010A(2) E400
10.0
8.0
D
T496D107(1)010A(2) E700
10.0
8.0
D
T496D107(1)010A(2) E400
10.0
8.0
X
T496X157(1)010A(2) E700
15.0
8.0
X
T496X157(1)010A(2) E400
15.0
8.0
D
T496D157(1)010A(2) E700
15.0
8.0
D
T496D157(1)010A(2) E400
15.0
8.0
X
T496X227(1)010A(2) E500
22.0
8.0
X
T496X227(1)010A(2) E300
22.0
8.0
D
T496D227(1)010A(2) E300
22.0
8.0
16 Volt Rating at +85°C (10 Volt Rating at +125°C)
B
T496B225(1)016A(2) E3K5
0.5
6.0
B
T496B335(1)016A(2) E3K5
0.5
6.0
B
T496B335(1)016A(2) E2K1
0.5
6.0
B
T496B475(1)016A(2) E3K5
0.8
6.0
B
T496B475(1)016A(2) E1K6
0.8
6.0
C
T496C685(1)016A(2) E2K0
1.1
6.0
C
T496C685(1)016A(2) E600
1.1
6.0
B
T496B106(1)016A(2) E3K5
1.6
6.0
C
T496C106(1)016A(2) E2K0
1.6
6.0
C
T496C106(1)016A(2) E700
1.6
6.0
C
T496C156(1)016A(2) E2K0
2.4
6.0
C
T496C156(1)016A(2) E600
2.4
6.0
D
T496D226(1)016A(2) E1K0
3.6
6.0
D
T496D226(1)016A(2) E500
3.6
6.0
C
T496C226(1)016A(2) E1K6
3.6
6.0
C
T496C226(1)016A(2) E1K0
3.6
6.0
D
T496D336(1)016A(2) E1K0
5.3
6.0
D
T496D336(1)016A(2) E400
5.3
6.0
X
T496X476(1)016A(2) E900
7.5
6.0
X
T496X476(1)016A(2) E400
7.5
6.0
D
T496D476(1)016A(2) E800
7.5
6.0
7.5
6.0
D
T496D476(1)016A(2) E400
X
T496X107(1)016A(2) E700
16.0
8.0
Fuse
Tantalum
DCL µA
@ 25°C
Max.
CAPACITOR MARKINGS
T496 Series — All Case Sizes
T496 SERIES CONSTRUCTION
Molded
Case
Capaci- Case
tance µF Size
F+
227
20K
542
Polarity
Indicator (+)
(Solid Stripe)
Picofarad
Code
KEMET
I. D. Symbol
Print Week Code:
1st Digit = Year
2nd & 3rd Digits = Week
"542" = The 42nd week of 2005
10 Volt Rating at +85°C (7 Volt Rating at + 125°C)
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
37
SOLID TANTALUM CHIP CAPACITORS
T496 RATINGS & PART NUMBER REFERENCE
Capaci- Case
tance µF Size
1.5
2.2
2.2
3.3
4.7
6.8
6.8
10.0
10.0
15.0
15.0
15.0
22.0
22.0
33.0
33.0
B
B
B
B
C
C
C
C
C
D
D
C
D
D
X
X
33.0
47.0
47.0
D
X
D
0.68
1.0
1.0
1.5
1.5
2.2
3.3
3.3
4.7
4.7
6.8
6.8
10.0
10.0
10.0
15.0
15.0
22.0
22.0
22.0
22.0
B
B
B
B
B
C
C
C
C
C
C
C
C
D
D
D
D
X
X
D
D
KEMET
Part Number
DCL µA
@ 25°C
Max.
DF%
@ +25°C
120 Hz.
Max.
ESR Ω
@ +25°C
100 kHz
Max.
20 Volt Rating at +85°C (13 Volt Rating at +125°C)
0.5
6.0
T496B155(1)020A(2) E5K0
T496B225(1)020A(2) E3K5
0.5
6.0
T496B225(1)020A(2) E1K6
0.5
6.0
T496B335(1)020A(2) E3K5
0.7
6.0
T496C475(1)020A(2) E2K0
1.0
6.0
T496C685(1)020A(2) E2K0
1.4
6.0
T496C685(1)020A(2) E600
1.4
6.0
T496C106(1)020A(2) E2K0
2.0
6.0
T496C106(1)020A(2) E800
2.0
6.0
T496D156(1)020A(2) E1K0
3.0
6.0
T496D156(1)020A(2) E500
3.0
6.0
T496C156(1)020A(2) E500
3.0
6.0
T496D226(1)020A(2) E1K0
4.4
6.0
T496D226(1)020A(2) E500
4.4
6.0
T496X336(1)020A(2) E900
6.6
6.0
T496X336(1)020A(2) E400
6.6
6.0
T496D336(1)020A(2) E400
6.6
6.0
T496X476(1)020A(2) E300
9.4
6.0
T496D476(1)020A(2) E300
9.4
6.0
25 Volt Rating at +85°C (17 Volt Rating at +125°C)
T496B684(1)025A(2) E6K5
0.5
4.0
T496B105(1)025A(2) E5K0
0.5
4.0
T496B105(1)025A(2) E3K5
0.5
4.0
T496B155(1)025A(2) E5K0
0.5
6.0
T496B155(1)025A(2) E1K6
0.5
6.0
T496C225(1)025A(2) E3K5
0.6
6.0
T496C335(1)025A(2) E2K5
0.9
6.0
T496C335(1)025A(2) E2K1
0.9
6.0
T496C475(1)025A(2) E2K5
1.2
6.0
T496C475(1)025A(2) E1K3
1.2
6.0
T496C685(1)025A(2) E2K0
1.7
6.0
T496C685(1)025A(2) E600
1.7
6.0
T496C106(1)025A(2) E600
2.5
6.0
T496D106(1)025A(2) E1K2
2.5
6.0
T496D106(1)025A(2) E600
2.5
6.0
T496D156(1)025A(2) E1K0
3.8
6.0
T496D156(1)025A(2) E500
3.8
6.0
T496X226(1)025A(2) E900
5.5
6.0
T496X226(1)025A(2) E400
5.5
6.0
T496D226(1)025A(2) E800
5.5
6.0
T496D226(1)025A(2) E400
5.5
6.0
5.0
3.5
1.6
3.5
2.0
2.0
0.6
2.0
0.8
1.0
0.5
0.5
1.0
0.5
0.9
0.4
0.4
0.3
0.3
6.5
5.0
3.5
5.0
1.6
3.5
2.5
2.1
2.5
1.3
2.0
0.6
0.6
1.2
0.6
1.0
0.5
0.9
0.4
0.8
0.4
(1) To complete KEMET Part Number, insert M for ±20% tolerance or K for
±10% tolerance.
(2) To complete KEMET Part Number, insert lead material designation for
Ordering Information on page 36.
Capaci- Case
tance µF Size
0.47
0.47
0.68
1.0
1.0
1.5
1.5
2.2
2.2
3.3
3.3
4.7
4.7
6.8
6.8
10.0
10.0
10.0
B
B
B
B
B
C
C
C
C
C
C
D
D
D
D
X
X
D
15.0
15.0
15.0
22.0
X
X
D
X
0.15
0.22
0.22
0.33
0.33
0.47
0.47
0.68
0.68
1.0
1.0
1.5
1.5
2.2
2.2
3.3
3.3
4.7
4.7
4.7
B
B
B
B
B
C
C
C
C
C
C
C
C
D
D
D
D
X
X
D
KEMET
Part Number
DCL µA
@ 25°C
Max.
DF%
@ +25°C
120 Hz.
Max.
35 Volt Rating at +85°C (23 Volt Rating at +125°C)
0.5
4.0
T496B474(1)035A(2)E8K0
T496B474(1)035A(2)E2K6
0.5
4.0
T496B684(1)035A(2) E6K5
0.5
4.0
T496B105(1)035A(2) E5K0
0.5
4.0
T496B105(1)035A(2) E3K1
0.5
4.0
T496C155(1)035A(2) E4K5
0.5
6.0
T496C155(1)035A(2) E2K6
0.5
6.0
T496C225(1)035A(2) E3K5
0.8
6.0
T496C225(1)035A(2) E1K6
0.8
6.0
T496C335(1)035A(2) E2K5
1.2
6.0
T496C335(1)035A(2) E900
1.2
6.0
T496D475(1)035A(2) E1K5
1.7
6.0
T496D475(1)035A(2) E700
1.7
6.0
T496D685(1)035A(2) E1K3
2.4
6.0
T496D685(1)035A(2) E750
2.4
6.0
T496X106(1)035A(2) E1K0
3.5
6.0
T496X106(1)035A(2) E500
3.5
6.0
T496D106(1)035A(2) E400
3.5
6.0
T496X156(1)035A(2) E900
5.3
6.0
T496X156(1)035A(2) E500
5.3
6.0
T496D156(1)035A(2) E500
5.3
6.0
T496X226(1)035A(2) E300
7.7
6.0
50 Volt Rating at +85°C (33 Volt Rating at +125°C)
T496B154(1)050A(2) E16K
0.5
4.0
T496B224(1)050A(2) E14K
0.5
4.0
T496B224(1)050A(2) E10K
0.5
4.0
T496B334(1)050A(2) E10K
0.5
4.0
T496B334(1)050A(2) E2K6
0.5
4.0
T496C474(1)050A(2) E8K0
0.5
4.0
T496C474(1)050A(2) E1K9
0.5
4.0
T496C684(1)050A(2) E7K0
0.5
4.0
T496C684(1)050A(2) E1K7
0.5
4.0
T496C105(1)050A(2) E5K5
0.5
4.0
T496C105(1)050A(2) E2K7
0.5
4.0
T496C155(1)050A(2) E5K0
0.8
6.0
T496C155(1)050A(2) E2K0
0.8
6.0
T496D225(1)050A(2) E2K5
1.1
6.0
T496D225(1)050A(2) E900
1.1
6.0
T496D335(1)050A(2) E2K0
1.7
6.0
T496D335(1)050A(2) E1K0
1.7
6.0
T496X475(1)050A(2) E1K5
2.4
6.0
T496X475(1)050A(2) E400
2.4
6.0
T496D475(1)050A(2) E400
2.4
6.0
Higher voltage ratings and tighter capacitance tolerance product may
be substituted within the same size at KEMET’s option. Voltage substitutions will be marked with the higher voltage rating.
T496 SERIES CONSTRUCTION
38
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
ESR Ω
@ +25°C
100 kHz
Max.
8.0
2.6
6.5
5.0
3.1
4.5
2.6
3.5
1.6
2.5
0.9
1.5
0.7
1.3
0.75
1.0
0.5
0.5
0.9
0.5
0.5
0.3
16.0
14.0
10.0
10.0
2.6
8.0
1.9
7.0
1.7
5.5
2.7
5.0
2.0
2.5
0.9
2.0
1.0
1.5
0.4
0.4
Solid Tantalum Surface Mount
T496 SERIES—Fail-Safe Fused
SOLID
TANTALUM
CHIPCHIP
CAPACITORS
SOLID
TANTALUM
CAPACITORS
Tantalum
Surface
Mount
SolidSolid
Tantalum
Surface
Mount
T498 SERIES—HIGH
TEMPERATURE
(150°) (150°)
T498 SERIES—HIGH
TEMPERATURE
T498 RATINGS & PART NUMBER REFERENCE
Features
•
•
•
•
•
150°C Maximum temperature capability
Temperature/Voltage derating: 2/3 at 150°C
Self-healing mechanism
Capacitance: 0.47 to 220μF
Reliability: 0.5%/1000 Hrs. @ rated voltage
@ rated temperature
•
•
•
•
•
•
100% Accelerated steady state aging
100% Surge current testing
EIA standard case size
Voltage: 6 to 50 VDC
RoHS Compliant versions available
Various termination options
Outline Drawings
CATHODE (-) END
VIEW
SIDE VIEW
ANODE (+) END
VIEW
B
W
BOTTOM VIEW
B
H
E
K
T
S
X
F
P
S
G
R
A
L
Termination
Termination
cutout
cutoutatat
KEMET’s
KEMET’s
Option,
Option,either
end
either end
Dimensions - Millimeters (Inches)
Case Size
Component
K*
± 0.20
± (.008)
F*
±0.1
± (.004)
S*
± 0.3
± (.012)
B (Ref)
± 0.15
± (.004)
X
(Ref)
P
(Ref)
R
(Ref)
3.2 ± 0.2
1.6 ± 0.2
1.6 ± 0.2
(.126 ± .008) (.063 ± .008) (.063 ± .008)
0.9
(.035)
1.2
(.047)
0.8
(.031)
0.4
(.016)
0.10 ± 0.10
(.004 ± .004)
0.4
(.016)
0.4
0.13
1.4
1.1
1.3
(.016) (.005) (.055) (.043) (.051)
3528-21
3.5 ± 0.2
2.8 ± 0.2
1.9 ± 0.2
(.138 ± .008) (.110 ± .008) (.075 ± .008)
1.1
(.043)
2.2
(.087)
0.8
(.031)
0.4
(.016)
0.10 ± 0.10
(.004 ± .004)
0.5
(.020)
1.0
0.13
2.1
1.8
2.2
(.039) (.005) (.083) (.071) (.087)
C
6032-28
6.0 ± 0.3
3.2 ± 0.3
(.236 ± .012) (.126 ± .012)
2.5 ± 0.3
.098 ± .012
1.4
(.055)
2.2
(.087)
1.3
(.051)
0.5
(.020)
0.10 ± 0.10
(.004 ± .004)
0.9
(.035)
1.0
0.13
3.1
2.8
2.4
(.039) (.005) (.122) (.110) (.094)
D
7343-31
7.3 ± 0.3
4.3 ± 0.3
2.8 ± 0.3
(.287 ± .012) (.169 ± .012) (.110 ± .012)
1.5
(.059)
2.4
(.094)
1.3
(.051)
0.5
(.020)
0.10 ± 0.10
(.004 ± .004)
0.9
(.035)
1.0
0.13
3.8
3.5
3.5
(.039) (.005) (.150) (.138) (.138)
X
7343-43
7.3 ± 0.3
4.3 ± 0.3
4.0 ± 0.3
(.287 ± .012) (.169 ± .012) (.157 ± .012)
2.3
(.091)
2.4
(.094)
1.3
(.051)
0.5
(.020)
0.10 ± 0.10
(.004 ± .004)
1.7
(.067)
1.0
0.13
3.8
3.5** 3.5**
(.039) (.005) (.150) (.138) (.138)
KEMET
EIA
A
3216-18
B
L*
W*
H*
T
(Ref)
A
(Min)
G
(Ref)
E
(Ref)
T498 Ordering Information
T
498
X
227
Tantalum
Series
498 – High Temp (150°C)
Case Size
A,B,C,D,X
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros.
Capacitance Tolerance
M = ±20%
K = ±10%
3
39
M
010
A
T
E500
ESR
Note: in mOhm
K designates “thousand”
E1K5 = 1.5 Ohm
E500 = 0.5 Ohm
Lead Material
T = 100% Tin
G = Gold
H = Tin/Lead
(SnPb 5% Pb min)
Failure Rate
A = Not Applicable
Voltage
Note: 006 = 6.3
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
39
SOLID TANTALUM CHIP CAPACITORS
T498 RATINGS & PART NUMBER REFERENCE
Capacitance
µF
Case
Size
10.0
15.0
22.0
33.0
47.0
100.0
B
B
C
B
C
D
2.2
3.3
4.7
4.7
10.0
15.0
15.0
22.0
22.0
47.0
100.0
220.0
A
A
A
B
B
B
C
B
C
D
D
X
1.0
3.3
4.7
6.8
6.8
10.0
10.0
15.0
22.0
33.0
47.0
68.0
100.0
A
A
B
A
B
B
C
C
C
D
D
D
X
1.0
10.0
A
C
0.47
2.2
10.0
15.0
22.0
33.0
A
B
C
D
D
D
0.33
1.0
1.5
3.3
6.8
10.0
22.0
33.0
A
A
C
C
D
D
X
X
3.3
10.0
D
D
KEMET
Part Number
DC
Leakage
PA @
25ºC Max
DF %
ESR :
@ +25ºC @ +25°C
120 Hz
100 kHz
Max
Max
**6 Volt Rating at +85ºC ( 4 Volt Rating at +150ºC)
T498B106(1)006A(2)E2K1
0.7
6.0
T498B156(1)006A(2)E1K8
1.0
6.0
T498C226(1)006A(2)E1K3
1.4
6.0
T498B336(1)006A(2)E1K7
2.1
6.0
T498C476(1)006A(2)E800
3.0
6.0
T498D107(1)006A(2)E600
6.3
8.0
10 Volt Rating at +85ºC ( 7 Volt Rating at +150ºC)
T498A225(1)010A(2)E4K6
0.5
6.0
T498A335(1)010A(2)E3K6
0.5
6.0
T498A475(1)010A(2)E2K9
0.5
6.0
T498B475(1)010A(2)E2K7
0.5
6.0
T498B106(1)010A(2)E1K8
1.0
6.0
T498B156(1)010A(2)E1K5
1.5
6.0
T498C156(1)010A(2)E1K8
1.5
6.0
T498B226(1)010A(2)E1K5
2.2
6.0
T498C226(1)010A(2)E1K1
2.2
6.0
T498D476(1)010A(2)E600
4.7
6.0
T498D107(1)010A(2)E600
10.0
8.0
T498X227(1)010A(2)E500
22.0
8.0
16 Volt Rating at +85ºC (11 Volt Rating at +150ºC)
T498A105(1)016A(2)E6K5
0.5
4.0
T498A335(1)016A(2)E3K4
0.5
6.0
T498B475(1)016A(2)E2K1
0.8
6.0
T498A685(1)016A(2)E2K6
1.1
6.0
T498B685(1)016A(2)E1K8
1.1
6.0
T498B106(1)016A(2)E2K8
1.6
6.0
T498C106(1)016A(2)E1K4
1.6
6.0
T498C156(1)016A(2)E1K1
2.4
6.0
T498C226(1)016A(2)E1K0
3.6
6.0
T498D336(1)016A(2)E600
5.3
6.0
T498D476(1)016A(2)E600
7.5
6.0
T498D686(1)016A(2)E600
10.8
6.0
T498X107(1)016A(2)E100
16.0
8.0
20 Volt Rating at +85ºC (13 Volt Rating at +150ºC)
T498A105(1)020A(2)E5K9
0.5
4.0
T498C106(1)020A(2)E1K1
2.0
6.0
25 Volt Rating at +85ºC (17 Volt Rating at +150ºC)
T498A474(1)025A(2)E8K5
0.5
4.0
T498B225(1)025A(2)E3K0
0.6
6.0
T498C106(1)025A(2)E1K1
2.5
6.0
T498D156(1)025A(2)E700
3.8
6.0
T498D226(1)025A(2)E600
5.5
6.0
T498D336(1)025A(2)E600
8.3
6.0
35 Volt Rating at +85ºC (24 Volt Rating at +150ºC)
T498A334(1)035A(2)E11K
0.5
4.0
T498A105(1)035A(2)E10K
0.5
4.0
T498C155(1)035A(2)E3K3
0.5
6.0
T498C335(1)035A(2)E1K7
1.2
6.0
T498D685(1)035A(2)E900
2.4
6.0
T498D106(1)035A(20E700
3.5
6.0
T498X226(1)035A(2)E500
7.7
6.0
T498X336(1)035A(2)E500
11.6
6.0
50 Volt Rating at +85ºC (34 Volt Rating at +150ºC)
T498D335(1)050A(2)E1K1
1.7
6.0
T498D106(1)050A(2)E1K0
5.0
6.0
2.1
1.8
1.3
1.7
0.8
0.6
4.6
3.6
2.9
2.7
1.8
1.5
1.8
1.5
1.1
0.6
0.6
0.5
LAND PATTERN DIMENSIONS
FOR REFLOW SOLDER
KEMET/
EIA Size
Code
A/3216-18
B/3528-21
C/6032-28
D/7343-31
X/7343-43
Pad Dimensions
Z
G
X
Y
(Ref)
C
(Ref)
4.70
5.00
7.60
8.90
8.90
0.80
1.10
2.50
3.80
3.80
1.50
2.50
2.50
2.70
4.40
1.95
1.95
2.55
2.55
2.55
2.75
3.05
5.05
6.35
6.35
C
Grid
Placement
Courtyard
X
G
Y
Z
6.5
3.4
2.1
2.6
1.8
2.8
1.4
1.1
1.0
0.6
0.6
0.6
0.1
5.9
1.1
8.5
3.0
1.1
0.7
0.6
0.6
11.0
10.0
3.3
1.7
0.9
0.7
0.5
0.5
PACKAGING SPECIFICATIONS
Case Codes
KEMET
Tape & Reel Dimensions
Tape
Width
(mm)
EIA
Pitch
mm ± 0.1
Reel Quantity
Part Sprocket
180mm 330mm
(7”)
(13”)
A
3216-18
8 ± 0.3
8
4
2000
9000
B
3528-21
8 ± 0.3
8
4
2000
8000
C
6032-28 12 ± 0.3
8
4
500
3000
D
7343-31 12 ± 0.3
8
4
500
2500
X
7343-43 12 ± 0.3
8
4
500
2000
COMPONENT MARKING
(HT)
KEMET
High
Temp
Rated
Voltage
Polarity
Indicator (+)
227
10K
525
Print Week Code
1st Digit = Year
2nd & 3rd Digits = Week
“525” = 25th Week of 2005
1.1
1.0
(1) To complete KEMET part number, insert K - ± 10% or M - ±20% capacitance tolerance.
(2) To complete KEMET part number, insert T for 100% tin, H for Sn/Pb or G for gold.
** 6 volt product equivalent to 6.3 volt product.
Note: Higher voltage ratings, lower ESR and tighter capacitance tolerance
product may be substituted within the same size at KEMET’s option.
Voltage substitutions will be marked with the higher voltage rating.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Picofarad
Code
KEMET ID
Solid Tantalum Surface Mount
T498 SERIES—HIGH TEMPERATURE (150°)
SOLID TANTALUM CHIP CAPACITORS
Solid Tantalum Surface Mount
T510 SERIES—High Capacitance-Low ESR
FEATURES
•
•
•
•
•
Ultra Low ESR < 30 mΩ
New E/7260 Case with ESR < 18 mΩ
Up to 5 Amps ripple current
RoHS Compliant & Leadfree Termination (see
www. kemet.com for lead transitions)
Operating Temperature: -55˚C to +125˚C
100% accelerated steady-state aging
100% Surge current test
• Precision - molded, laser-marked case
• Symmetrical compliant terminations
• Taped and reeled per EIA 481-1
•
•
OUTLINE DRAWING
CATHODE (-) END
VIEW
SIDE VIEW
ANODE (+) END
VIEW
B
W
BOTTOM VIEW
B
H
E
K
T
P
S
X
F
S
G
A
L
Termination
cutout at
KEMET’s
Option,
either end
R
DIMENSIONS - Millimeters (Inches)
COMPONENT
CASE SIZE
L
W
H
± 0.20
K ± (.008)
± 0.1
F ± (.004)
S ± (.012)
± 0.3
B ± 0.15
(Ref) ± (.006)
KEMET
EIA
X
7343-43
4.0 ± 0.3
7.3 ± 0.3
4.3 ± 0.3
(.287 ± .012) (.169 ± .012) (.157 ± .012)
2.3
(.091)
2.4
(.094)
1.3
(.051)
0.5
(.020)
E
7260-38
7.3 ± 0.3
3.6 ± 0.2
6.0 ± 0.3
(.287 ± .012) (.236 ± .012) (.142 ± .008)
2.3
(.091)
4.1
(.161
1.3
(.051)
0.5
(.020)
X
(Ref)
P
(Ref)
R
(Ref)
T
(Ref)
A
(Min)
G
(Ref)
E
(Ref)
0.10 ± 0.10
0.9
1.0
0.13
3.8
3.5
3.5
(.004 ± .004) (.035) (.039) (.005) (.150) (.138) (.138)
0.13
3.8
3.5
0.10 ± 0.10
0.9
1.0
3.5
(.004 ± .004) (.035) (.039) (.005) (.150) (.138) (.138)
Notes: Metric Dimensions govern
(Ref) - Dimensions provided for reference only.
T510 RATINGS & PART NUMBER REFERENCE
ESR m:
Cap
Cap
µF
µF
Case
Case
Size
Size
DF %
DC Leakage
ESR
DC
ESR
DC
CapaciCase
KEMET Ripple
@ 25°C
RippleCurrent
Current
DF
DF%
%
@ 25°C
µA @ 25°C
Leakage
mΩ
Leakage
mΩ
tance µF Size
Part Number
100 kHz
Arms
Arms@
@+25°C,
+25°C,
@
Max
Max
Cap
Case
@+25°C
+25°C
Max
µA
@
+25°C
µA@
@
@
+25°C
100
100kHz,
kHz,max
max
120Hz
µF
Size
120Hz
+25°C
100
+25°C
100kHz
kHz 4 Volt Rating at +85°C (2.7 Volt Rating at 125°C)
Max
Max
Max
Max
680.0
X
T510X687(1)004A(2)E030
27.2
6.0
30.0
Max
Max
25°C
25°C 85°C
85°C 125°C
125°C
KEMET
KEMET
Part
PartNumber
Number
1000.0
680.0
680.0
1000.0
1000.0
1000.0
1000.0
1000.0
1000.0
1000.0
1000.0
XX
XX
XX
EE
EE
470.0
470.0
680.0
680.0
680.0
680.0
680.0
680.0
XX
XX
EE
EE
330.0
330.0
XX
150.0
150.0
150.0
150.0
220.0
220.0
220.0
220.0
XX
XX
XX
XX
X
T510X108(1)004A(2)E018
40.0
6.0
ESR
DC
Ripple Current
DF %
Leakage
mΩ
Arms @ +25°C,
@ +25°C
µA
@
@
+25°C
125°C
100 kHz, max
120Hz
+25°C
100 kHz
Max
1.2
Max
Max
25°C 85°C 125°C
Ripple Current A rms
@ 25°C 100 kHz, max
KEMET
25°C
85°C
Part Number
3.0
3.9
18.0
2.7
3.5
1.5
44Volt
Volt
at
20 Volt Rating
at 1.6
+85°C (13.4 Volt Rating at 125°C)
VoltRating
Ratingat
at+85°C
+85°C(2.7
(2.7
VoltRating
Rating
at125°C)
125°C)
1000.0
E
T510E108(1)004A(2)E018
40.0
6.0
18.0
4.0
3.6
1000.0
E6.0 T510E108(1)004A(2)E010
40.0
6.0
5.3
4.8
2.1
T510X687(1)004A(2)E030
27.2
6.0
30
3.0
1.2
100.0
X10.0 T510X107(1)020A(2)E035
20.0
8.0
35.0
T510X687(1)004A(2)E030
27.2
30
3.0 2.7
2.7
1.2
6/6.3
+85°C (4 Volt 100.0
Rating at 125°C)
T510X108(1)004A(2)E018
40.0
6.0
18
3.9
3.5
X
T510X107(1)020A(2)E040
20.0
6.0
40.0
T510X108(1)004A(2)E018
40.0
6.0
18
3.9Volt Rating
3.5 at 1.5
1.5
470.0
X
T510X477(1)006A(2)E030
28.2
6.0
3.0
2.7
1.2
T510X108(1)004A(2)E023
40.0
6.0
23
3.4
1.3
100.0
X30.0 T510X107(1)020A(2)E045
20.0
6.0
45.0
T510X108(1)004A(2)E023
40.0
6.0 T510E687(1)006A(2)E023
23
3.4 3.0
3.0
1.3
680.0
E
40.8
6.0
23.0
3.5
3.2
1.4
T510E108(1)004A(2)E018
40.0
6.0
18
4.0
1.6
25 Volt Rating
at1.9
+85°C (17 Volt Rating at 125°C)
T510E108(1)004A(2)E018
40.0
18
4.0 3.6
3.6
1.6
680.0
E6.0 T510E687(1)006A(2)E012
40.8
6.0
12.0
4.8
4.3
T510E108(1)004A(2)E010
40.0
6.0
10
5.3
4.8
2.1
10
Volt Rating
T510E108(1)004A(2)E010
40.0
6.0
10
5.3
4.8 at +85°C
2.1 (7 Volt Rating
100.0at 125°C)
E
T510E107(1)025A(2)E050
25.0
8.0
50
X
T510X337(1)010A(2)E035
33.0
6.0
35.0
2.8
2.5
1.1
6/6.3
(4
at
6/6.3Volt
VoltRating
Ratingat
at+85°C
+85°C330.0
(4Volt
VoltRating
Rating
at125°C)
125°C)
35 Volt Rating at +85°C (23 Volt Rating at 125°C)
16 Volt Rating at +85°C (11 Volt Rating at 125°C)
T510X477(1)006A(2)E030
28.2
6.0
30
3.0
2.7
1.2
T510X477(1)006A(2)E030
28.2
6.0
30
3.0
2.7
1.2
22.0
X40.0 T510X226(1)035A(2)E100
7.7
6.0
100
150.0
X
T510X157(1)016A(2)E040
24.0
6.0
2.6
2.3
1.0
T510X687(1)006A(2)E023
42.8
6.0
23
3.4
1.4
T510X687(1)006A(2)E023
42.8
23
3.4 3.1
3.1
1.4
220.0
X6.0 T510X227(1)016A(2)E040
35.2
10.0
2.6
2.3
1.0
22.0
X40.0 T510X226(1)035A(2)E080
7.7
6.0
80
T510E687(1)006A(2)E023
40.8
6.0
23
3.5
1.4
220.0
X6.0 T510X227(1)016A(2)E025
35.2
10.0
3.3
3.0
1.3
T510E687(1)006A(2)E023
40.8
23
3.5 3.2
3.2
1.4
22.0
X25.0 T510X226(1)035A(2)E060
7.7
6.0
60
204.8
Volt Rating
at 125°C)
T510E687(1)006A(2)E012
40.8
6.0
12
4.3
1.9
T510E687(1)006A(2)E012
40.8
6.0
12
4.8
4.3at +85°C
1.9(13.4 Volt Rating
33.0
X
T510X336(1)035A(2)E065
11.6
6.0
65
100.0
X
T510X107(1)020A(2)E040
20.0
6.0
40.0
2.6
2.3
1.0
10
Volt
Rating
at
+85°C
(7
Volt
Rating
at
125°C)
10 Volt Rating at +85°C (7 Volt Rating at 125°C) 25 Volt Rating at +85°C (17 Volt Rating
33.0at 125°C)
X
T510X336(1)035A(2)E050
11.6
6.0
50
T510X337(1)010A(2)E035
33.0
6.0
35
2.8
1.1
T510X337(1)010A(2)E035
33.0
35
2.8 2.5
2.5
1.1
100.0
E6.0 T510E107(1)025A(2)E050
25.0
8.0
2.4
2.1
1.0
47.0
X50.0 T510X476(1)035A(2)E055
16.5
8.0
55
16
Volt
Rating
at
+85°C
(11
Volt
Rating
at
125°C)
35
Volt
Rating
at
+85°C
(23
Volt
Rating
at
125°C)
16 Volt Rating at +85°C (11 Volt Rating at 125°C)
47.0
X
T510X476(1)035A(2)E065
16.5
8.0
65
22.0
X
T510X226(1)035A(2)E080
7.7
6.0
80.0
1.8
1.7
0.7
T510X157(1)016A(2)E030
24.0
6.0
30
3.0
1.2
T510X157(1)016A(2)E030
24.0
6.0
30
3.0 2.7
2.7
1.2
47.0
E
T510E476(1)035A(2)E050
16.5
8.0
50
33.0
X
T510X336(1)035A(2)E065
11.6
6.0
65.0
2.0
1.8
0.8
T510X157(1)016A(2)E040
24.0
6.0
40
2.6
2.3
1.0
T510X157(1)016A(2)E040
24.0
40
2.6
2.3
1.0
50 Volt Rating
at0.9
+85°C (33 Volt Rating at 125°C)
33.0
X6.0 T510X336(1)035A(2)E050
11.6
6.0
50.0
2.3
2.1
T510X227(1)016A(2)E040
35.2
10.0
40
2.6
2.3
1.0
47.0
X
T510X476(1)035A(2)E055
16.5
8.0
2.2
2.0
0.9
T510X227(1)016A(2)E040
35.2
10.0
40
2.6
2.3
1.0
10.0
X55.0 T510X106(1)050A(2)E120
5.0
8.0
120
47.0
E
T510E476(1)035A(2)E050
16.5
8.0
50.0
2.4
2.1
1.0
T510X227(1)016A(2)E025
35.2
10.0
25
3.3
1.3
T510X227(1)016A(2)E025
35.2
10.0
25
3.3 3.0
3.0
1.3
10.0
X
T510X106(1)050A(2)E090
5.0
8.0
90
(1) To complete KEMET part number insert "K" -10.0
±10%
10.0
50 Volt Rating at +85°C (33 Volt Rating at 125°C)
or
- ±20% capacitance tolerance.
complete120.0
KEMET
X "M"T510X106(1)050A(2)E120
5.0 (2) To 8.0
X
T510X106(1)050A(2)E090
5.0
8.0
90.0
7.7
2.6
2.4
6.9
2.3
2.2
3.1
1.0
0.9
2.4
2.1
1.0
1.6
1.8
2.1
2.0
2.3
2.2
2.0
2.4
1.4
1.7
1.9
1.8
2.1
2.0
1.8
2.1
0.6
0.7
0.8
0.8
0.9
0.9
0.8
1.0
1.5
1.7
1.3
1.6
0.6
0.7
part
H (SnPb) or T - 100% tin.
1.5 number,
1.3 insert0.6
1.7
1.6
0.7
(1) To complete KEMET part number insert "K" - ±10% or "M" - ±20% capacitance tolerance. (2) To complete KEMET part number, insert H (SnPb) or T 100% tin.
T510 ORDERING INFORMATION
T
510
X
477
M
006
A
T
030
ESR
Tantalum
Series
E030 = ESR in Milliohmns = 30 mOhms
Lead Material
T510 - High Capacitance, Low ESR
T = 100% Tin (Sn) Plated
H = (Sn) Solder-Coated (90% Sn/10% Pb)
G = Gold Plated
S = Not Recommended for new design
Case Size
E, X
Capacitance Picofarad Code
Failure Rate
First two digits represent significant figures. Third digit
specifies number of zeros to follow.
A = Not Applicable
VOLTAGE
Capacitance Tolerance
supply is not
guaranteed
with
*PartMnumber
See www.kemet.com
for Pb
Free transition.
= ±20%,example:
K = ±10%T510X477M006AT (14 digits - no spaces).*Pb-free
** “S” Termination codes are converting from 90 Sn/10 Pb to 100% tin finishes.
including
“S” suffix
the ‘S’Orders
termination
code.
termination codes do not quarantee Pb-free product.
This termination code not available
effective 15 July 2007.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
41
SOLID TANTALUM CHIP CAPACITORS
T510 SERIES—High Capacitance
TYPICAL ESR/Z FREQUENCY SCAN @25˚C
T510X477M006AS
TYPICAL CAP FREQUENCY SCAN @25˚C
T510X477M006AS
500
10
450
) (Ω)
350
1
250
Z(
300
200
)
Capacitance (μF)
400
.1
ESR (
150
100
50
0
100Hz
1kHz
10kHz
100kHz
.01
100Hz
1MHz
TYPICAL CAP FREQUENCY SCAN @ 25°C
T510E108M004AS
1kHz
10kHz
100kHz 1MHz
TYPICAL ESR/Z FREQUENCY SCAN @ 25°C
T510E108M004AS
10
1500
1400
) (Ω)
1300
1
Z(
1100
)
1000
900
ESR (
Capacitance (μF)
1200
800
700
.1
600
500
100Hz
1kHz
10kHz
100kHz
.01
100Hz
1MHz
Date Code
Month
7 = Jul
2 = Feb
8= Aug
U = 2006
3 = Mar
9 = Sep
V = 2007
4 = Apr
10 = Oct
W = 2008
5 = May 11 = Nov
X = 2009
6 = Jun 12 = Dec
Polarity
Indicator
(+)
Voltage
Date
Code
477
6V
1 = Jan
T = 2005
M+
Ultra-Low
ESR Device
K
S = 2004
KEMET
Organic
Picofarad
Code
V5
Lot Code
49
10kHz
100kHz 1MHz
T510
CAPACITOR MARKINGS
CAPACITOR ALTERNATE MARKINGS
Date Code
Year
1kHz
Rated
Voltage
1st Digit
=Year
M+
477
6K
514
“514” = The 14th week
of 2005.
42
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Polarity
Indicator (+)
(Solid Stripe)
Picofarad
Code
KEMET
I. D. Symbol
2nd & 3rd Digits
= Week
CONDUCTIVE POLYMER CHIP CAPACITORS
COMPONENT PERFORMANCE CHARACTERISTICS
1. Operating Temperature Range
• -55ºC to +105ºC for T520; -55ºC to +125ºC for
T525 and T530
For T525 and T530 Series above 105ºC, the
voltage rating is reduced linearly from 1.0 x rated voltage to 0.8 x rated voltage at 125ºC.
2. Non-Operating Temperature Range
• -55ºC to +105ºC for T520
• -55ºC to +125ºC for T525 and T530
3. Capacitance and Tolerance
• 15μF to 1500μF
• ±20% Tolerance
Capacitance is measured at 120 Hz, up to 1.0 volt rms
maximum and up to 2.5V DC maximum. DC bias causes
only a small reduction in capacitance, up to about 2%
when full rated voltage is applied. DC bias is not commonly used for room temperature measurements but is more
commonly used when measuring at temperature extremes.
Capacitance does decrease with increasing frequency, but
not nearly as much or as quickly as standard tantalums.
Figure 1 compares the frequency induced cap roll-off
between the KO-CAP and traditional MnO2 types.
Capacitance also increases with increasing temperature.
See section 12 for temperature coefficients.
Capacitance (uF)
150
100
MnO 2
50
0
10
100
1,000
100,000
10,000
Frequency (Hz)
Polymer
1,000,000
10,000,000
100,000,000
FIGURE 1
4. Voltage Ratings
• 2V-25V DC Rated Voltage
This is the maximum peak DC operating voltage from
-55ºC to +105ºC for continuous duty. Above 105ºC, this
voltage is derated linearly to 2/3 the rated voltage for
operation at 125ºC for T525 and T530 Series.
80%
60%
40%
20%
-60
-40
-20
0
Conductive Polymer Surface Mount
ELECTRICAL
100%
Percent Change in
Working DC Voltage
Introduction
KEMET has developed a new type of tantalum capacitor that
replaces the solid manganese dioxide electrode with a solid
conductive polymer. This product is named the KO-CAP for
KEMET Organic Capacitor. The basic families are the T520,
T525 and T530 series. A separate detail of performance characteristics is presented here as there are some differences
between the polymer tantalums and the standard MnO2
types. Like all KEMET tantalum chips, these series are 100%
screened for all electrical parameters: Capacitance @ 120 Hz,
Dissipation Factor (DF) @ 120 Hz, ESR @ 100 kHZ and DC
Leakage. It is also 100% surge current tested at full rated voltage through a low impedance circuit. The advantages of the
polymer include very low ESR and elimination of the potentially catastrophic failure mode that may occur with standard tantalum capacitors in a high current application. Although the
natural KO-CAP series failure mechanism is a short circuit, it
does not exhibit an explosive failure mode.
+20 +40 +60 +80 +100 +120 +140
Operating Temperature—⬚C
• Surge Voltage Ratings
Surge voltage capability is demonstrated by application of 1000 cycles of the relevant voltage, at 25ºC,
85ºC or 105ºC. The parts are charged through a 33
ohm resistor for 30 seconds and then discharged
through a 33 ohm resistor for 30 seconds for each
cycle.Surge voltage is the maximum voltage to which
the part can be subjected under transient cents.
• Voltage Ratings • Table 1
Rated
Surge
Derated
Voltage
Voltage
Voltage
-55ºC to +105ºC
2V
2.6V
2.5V
3.3V
3V
3.9V
4V
5.2V
6.3V
8.2V
8V
10.4V
10V
13V
16V
20.8V
25V
32.5V
1.6V
2.0V
2.4V
3.2V
5V
6.4V
8V
12.8V
20V
Derated
Surge
Voltage
+125ºC
2.1V
2.6V
3.1V
4.2V
6.5V
8.3V
10.4V
16.6V
26V
5. Reverse Voltage Rating & Polarity
Polymer capacitors are polar devices and may be permanently damaged or destroyed if connected in the
wrong polarity. The positive terminal is identified by a
laser-marked stripe and may also include a beveled
edge. These capacitors will withstand a small degree
of transient voltage reversal for short periods as
shown in the following table. Please note that these
parts may not be operated continuously in reverse,
even within these limits.
Table 2
Temperature
25ºC
55ºC
85ºC
85ºC
105ºC
125ºC
Permissible Transient Reverse Voltage
15% of Rated Voltage
10% of Rated Voltage
5% of Rated Voltage
5% of Rated Voltage
3% of Rated Voltage
1% of Rated Voltage
6. DC Leakage Current
Because of the high conductivity of the polymer, the
KO-CAP family has higher leakage currents than traditional MnO2 type Tantalum caps. The DC Leakage
limits at 25ºC are calculated as 0.1 x C x V, where C is
cap in μF and V is rated voltage in Volts. Limits for all
part numbers are listed in the ratings tables.
DC Leakage current is the current that flows through
the capacitor dielectric after a five minute charging
period at rated voltage. Leakage is measured at 25ºC
with full rated voltage applied to the capacitor through
a 1000 ohm resistor in series with the capacitor.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
43
CONDUCTIVE POLYMER CHIP CAPACITORS
COMPONENT PERFORMANCE CHARACTERISTICS
DC Leakage current does increase with temperature. The limits for 85ºC @ Rated Voltage and
105ºC @ 0.8 x Rated Voltage are both 10 times
the 25ºC limit.
7. Surge Current Capability
Certain applications may induce heavy surge currents when circuit impedance is very low (<0.1
ohm per volt). Driving inductance may also cause
voltage ringing. Surge currents may appear as
transients during turn-on of equipment.
The KO-CAP has a very high tolerance for surge
current. And although the failure mechanism is a
short circuit, they do not ignite as may occur with
standard tantalums in such applications.
9. Equivalent Series Resistance (ESR) and
Impedance (Z)
The Equivalent Series Resistance (ESR) of the KOCAP is much lower than standard Tantalum caps
because the polymer cathode has much higher
conductivity. ESR is not a pure resistance, and it
decreases with increasing frequency.
Total impedance of the capacitor is the vector
sum of capacitive reactance (XC) and ESR, below
resonance; above resonance total impedance is
the vector sum of inductive reactance (X L) and
ESR.
The KO-CAP series receives 100% screening for
surge current in our production process.
Capacitors are surged 4 times at full rated voltage
applied through a total circuit resistance of <0.5
ohms. Failures are removed during subsequent
electrical testing.
8. Dissipation Factor (DF)
Refer to part number tables for maximum DF
limits.
Dissipation factor is measured at 120 Hz, up to 1.0
volt rms maximum, and up to 2.5 volts DC maximum at +25ºC. The application of DC bias causes
a small reduction in DF, about 0.2% when full
rated voltage is applied. DF increases with
increasing frequency.
Dissipation factor is the ratio of the equivalent
series resistance (ESR) to the capacitive reactance, (XC) and is usually expressed as a percentage. It is directly proportional to both capacitance
and frequency. Dissipation factor loses its importance at higher frequencies, (above about 1 kHz),
where impedance (Z) and equivalent series resistance (ESR) are the normal parameters of concern.
DF = R = 2 f CR
DF= Dissipation Factor
R= Equivalent Series
XC
Resistance (Ohms)
XC= Capacitive Reactance
(Ohms)
f= Frequency (Hertz)
C= Series Capacitance
(Farads)
DF is also referred to as tan or “loss tangent.”
The “Quality Factor,” “Q,” is the reciprocal of DF.
44
XC = 1 ohm
2fC
where:
f = frequency, Hertz
C = capacitance, Farad
FIGURE 2a
Total Impedance of the Capacitor Below
Resonance
XL = 2fL
where:
f = frequency, Hertz
L = inductance, Henries
FIGURE 2b Total Impedance of the Capacitor Above
Resonance
To understand the many elements of a capacitor, see Figure 3.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CONDUCTIVE POLYMER CHIP CAPACITORS
COMPONENT PERFORMANCE CHARACTERISTICS
ESR and Impedance
T495D 150 uF (MnO2 ) vs. T520D 150 uF (Polymer)
ESL
ESR
Impedance & ESR (Ohms)
100
C
10
RL
Cd
FIGURE 3
Rd
The Real Capacitor
A capacitor is a complex impedance consisting
of many series and parallel elements, each
adding to the complexity of the measurement
system.
ESL — Represents lead wire and construction
inductance. In most instances (especially in
solid tantalum and monolithic ceramic capacitors) it is insignificant at the basic measurement
frequencies of 120 and 1000 Hz.
ESR— Represents the actual ohmic series resistance in series with the capacitance. Lead wires
and capacitor electrodes are contributing
sources.
RL — Capacitor Leakage Resistance. Typically it
can reach 50,000 megohms in a tantalum
capacitor. It can exceed 1012 ohms in monolithic
ceramics and in film capacitors.
Rd — The dielectric loss contributed by dielectric
absorption and molecular polarization. It
becomes very significant in high frequency measurements and applications. Its value varies with
frequency.
Cd — The inherent dielectric absorption of the
solid tantalum capacitor which typically equates
to 1-2% of the applied voltage.
As frequency increases, X C continues to
decrease according to its equation above. There
is unavoidable inductance as well as resistance
in all capacitors, and at some point in frequency,
the reactance ceases to be capacitive and
becomes inductive. This frequency is called the
self-resonant point. In solid tantalum capacitors,
the resonance is damped by the ESR, and a
smooth, rather than abrupt, transition from
capacitive to inductive reactance follows.
Figure 4 compares the frequency response of a
KO-CAP to a standard Tantalum chip. Maximum
limits for 100 kHz ESR are listed in the part
number tables for each series.
The T530 Capacitance, Impedance and ESR vs.
Frequency Comparisions are located on page
57. Maximum limits for 100 kHz are listed in the
part number table on page 56.
MnO 2
0.1
0.01
Polymer
100
1,000
10,000
100,000
Frequency (Hz)
1,000,000
10,000,000
FIGURE 4
10. AC Power Dissipation
Power dissipation is a function of capacitor size
and materials. Maximum power ratings have been
established for all case sizes to prevent overheating. In actual use, the capacitor’s ability to dissipate the heat generated at any given power level
may be affected by a variety of circuit factors.
These include board density, pad size, heat sinks
and air circulation.
Table 3
Power Dissipation Ratings
Case Code
Maximum Power Dissipation
KEMET
EIA
mWatts @ +25ºC w/+20ºC Rise
T520/T 3528-12
70
T520/A 3216-18
75
T52x/B 3528-21
85
T520/U 6032-15
90
T520/C 6032-28
110
T520/W 7343-15
120
T520/V 7343-20
125
T52x/D 7343-31
150
T520/Y 7343-40
161
T520/X 7343-43
165
T530/D 7343-31
255
T530/Y 7343-40
263
T530/X 7343-43
270
T530/E 7260-38
285
11. Ripple Current/ Ripple Voltage
Permissible AC ripple voltage and current are
related to equivalent series resistance (ESR) and
power dissipation capability.
Permissible AC ripple voltage which may be
applied is limited by three criteria:
a. The positive peak AC voltage plus the DC bias
voltage, if any, must not exceed the DC voltage
rating of the capacitor.
b. The negative peak AC voltage, in combination
with bias voltage, if any, must not exceed the
permissible reverse voltage ratings presented
in Section 5.
c. The power dissipated in the ESR of the capacitor must not exceed the appropriate value
specified in Section 10.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
45
Conductive Polymer Surface Mount
1
CONDUCTIVE POLYMER CHIP CAPACITORS
COMPONENT PERFORMANCE CHARACTERISTICS
Actual power dissipated may be calculated from
the following:
P =I2R
Substituting I = E, P = E2R
Z
Z2
where:
I = rms ripple current (amperes)
E = rms ripple voltage (volts)
P = power (watts)
Z = impedance at specified frequency (ohms)
R = equivalent series resistance at specified
frequency (ohms)
Using P max from Table 3, maximum allowable
rms ripple current or voltage may be determined as
follows:
I(max) = P max/R
E(max) = Z P max/R
These values should be derated at elevated temperatures as follows:
Temperature
Derating Factor
85ºC
.9
125ºC
.4
ENVIRONMENTAL
12. Temperature Stability
Mounted capacitors withstand extreme temperature testing at a succession of continuous steps
at +25ºC, -55ºC, +25ºC, +85ºC, +105ºC, +25ºC in
that order*. Capacitors are allowed to stabilize at
each temperature before measurement. Cap, DF,
and DCL are measured at each temperature
except DC Leakage is not measured at -55ºC.
*Maximum temperature 125ºC for T525 and T530 series.
Table 4
Acceptable limits are as follows:
Step
1
Temp.
+25ºC
2
-55ºC
3
+25ºC
4
+85ºC
5
+105ºC
(125ºC for
ΔCap
Specified
Tolerance
±20% of
initial value
±10% of
initial value
±20% of
initial value
±30% of
initial value
DF
Catalog
Limit
Catalog
Limit
Catalog
Catalog
Limit
Limit
10x Catalog 1.2x Catalog
Limit
Limit
10x Catalog 1.5x Catalog
Limit
Limit
±10% of
initial value
Catalog
Limit
DCL
Catalog
Limit
N/A
T525, T530)
6
+25ºC
Catalog
Limit
13. Standard Life Test
• 85ºC, Rated Voltage, 2000 Hours
Post Test Performance:
a. Capacitance: within -20%/+10% of initial value
b. DF: within initial limit
c. DC Leakage: within initial limit
d. ESR: within initial limit
46
14. High
High Temperature
Temperature Life Test - 2000 Hours
•• 105°C,
105ºC, 0.8
x Rated
2000 hours, 125ºC
T520
- 1.0 x Voltage,
Rated Voltage;
for
T525,
T530T530
Series
125°C,
T525,
- .67 x Rated Voltage
Post Test Performance:
a. Capacitance: within -20%/+10% of initial value
b. DF: within initial limit
c. DC Leakage: within 1.25 initial limits for T520;
2 x initial limit for T525, T530
d. ESR: within 2 x initial limit for T520, T530
ESR: within initial limit for T525
15. Storage Life Test
• 105ºC, 0VDC, 2000 Hours for T520; 125ºC for
T525, T530
Post Test Perfomance:
a. Capacitance: within -20%/+10% of initial value
b. DF: within initial limit
c. DC Leakage: within 1.25 initial limits for T520;
2 x initial limit for T525, T530
d. ESR: within 2 x initial limit for T520, T530
ESR: within initial limit for T525
16. Thermal Shock
• Mil-Std-202, Method 107, Condition B
Minimum temperature is -55ºC
Maximum temperature is +105ºC for T520; 125ºC
for T525, T530
500 Cycles
Post Test Performance:
a. Capacitance: within +10%/-20% of initial value
b. DF: within initial limit
c. DC Leakage: within initial limit
d. ESR: within 2 x initial limit
17. Moisture Resistance Testing
• J-Std-020
Steps 7a and 7b excluded, 0V, 21 cycles
Post Test Performance:
a. Capacitance: within ±30% of initial value
b. DF: within initial limit
c. DC Leakage: within initial limit
d. ESR: within initial limit
e. JEDEC J-STD-020C Meets MSL Level 3
18. Load Humidity
• 85ºC, 85% RH, Rated Voltage, 500 Hours
Post Test Performance:
a. Capacitance: within +35%/-5% of initial value
b. DF: within initial limit
c. DC Leakage: within 5 x initial limit
d. ESR: within 2 x initial limit
19. ESD
• Polymer tantalum capacitors are not sensitive
to Electro-Static Discharge (ESD).
20. Failure Mechanism and Reliability
The normal failure mechanism is dielectric breakdown. Dielectric failure can result in high DC
Leakage current and may proceed to the level of a
short circuit. With sufficient time to charge, healing may occur by one of two potential mechanisms. The polymer adjacent to the dielectric fault
site may overheat and vaporize, disconnecting the
fault site from the circuit. The polymer may also
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CONDUCTIVE POLYMER CHIP CAPACITORS4
COMPONENT PERFORMANCE CHARACTERISTICS
Capacitor failure may be induced by exceeding
the rated conditions of forward DC voltage,
reverse DC voltage, surge current, power dissipation or temperature. Excessive environmental
stress, such as prolonged or high temperature
reflow processes may also trigger dielectric failure.
Failure rates may be improved in application by
derating the voltage applied to the capacitor.
KEMET recommends that KO-CAPs be derated
to 90% or less of the rated voltage in application
for part types ≤ 10V. Parts > 10V should be derated to 80% or less of the rated voltage.
KO-CAPs exhibit a benign failure mode in that
they do not fail catastophically even under typical
fault conditions. If a shorted capacitor is allowed
to pass unlimited current, it may overheat and the
case may discolor. But this is distinctly different
from the “ignition” that may occur with standard
MnO2 cathode tantalums. Replacement of the
MnO2 by the polymer removes the oxygen that
fuels ignition during a failure event.
26. Vibration
• Mil-Std-202, Method 204, Condition D, 10 Hz
to 2,000 Hz, 20G Peak
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
d. ESR — within initial limit
Conductive Polymer Surface Mount
oxidize into a more resistive material that eliminates the defect site in the dielectric and reduces
the flow of current.
27. Shock
• Mil-Std-202, Method 213, Condition I,
100 G Peak
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
d. ESR - within initial limit
28. Terminal Strength
• Pull Force
• One Pound (454 grams), 30 Seconds
• Tensile Force
• Four Pounds (1.8 kilograms), 60 Seconds
MECHANICAL
21. Resistance to Solvents
• Mil-Std-202, Method 215
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
d. ESR — within initial limit
e. Physical — no degradation of case, terminals
or marking
22. Fungus
• Mil-Std-810, Method 508
23. Flammability
• UL94 VO Classification
Encapsulant materials meet this classifaction
24. Resistance to Soldering Heat
• Maximum Reflow
+240 ±5ºC, 10 seconds
• Typical Reflow
+230 ±5ºC, 30 seconds
Post Test Performance:
a. Capacitance — within ±10% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor — within initial limit
d. ESR — within initial limit
4 lb. (1.8 Kg)
• Shear Force
Table 5 Maximum Shear Loads
Case Code
KEMET
EIA
A
3216-18
T
3528-12
B
3528-21
C
6032-28
V
7343-20
W
7343-15
D
7343-31
Y
7343-40
X
7343-43
Maximum Shear Loads
Kilograms
Pounds
3.2
7.0
3.6
8.0
3.6
8.0
4.5
10.0
5.0
11.0
5.0
11.0
5.0
11.0
5.0
11.0
5.0
11.0
Post Test Performance:
a. Capacitance — within ±5% of initial value
b. DC Leakage — within initial limit
c. Dissipation Factor —
within initial limit
d. ESR - within initial limit
25. Solderability
• Mil-Std-202, Method 208
• ANSI/J-STD-002, Test B
Applies to Solder Coated terminations only.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
47
CONDUCTIVE POLYMER CHIP CAPACITORS
COMPONENT PERFORMANCE CHARACTERISTICS
to maximize the intergrity of the solder joint, and to
minimize component rework due to unacceptable
solder joints.
APPLICATIONS
29. Handling
Automatic handling of encapsulated components is
enhanced by the molded case which provides compatibility with all types of high speed pick and place
equipment. Manual handling of these devices presents no unique problems. Care should be taken
with your fingers, however, to avoid touching the
solder-coated terminations as body oils, acids and
salts will degrade the solderability of these terminations. Finger cots should be used whenever manually handling all solderable surfaces.
90Sn/10Pb terminations are also available and can
be ordered with an “H” suffix.
KEMET’s “S” suffix remains an active termination
designator for current designs but is not recommended for new designs. Parts ordered with an “S”
suffix are not guaranteed to be Pb-Free or RoHS
compliant. Refer to www.kemet.com for information
on Pb-Free transition.
31. Recommended Mounting Pad Geometries
Proper mounting pad geometries are essential for
successful solder connections. These dimensions
are highly process sensitive and should be designed
C
Grid
Placement
Courtyard
X
G
Visit KEMET.com for Engineering Bulletin Number
F-2100 entitled “Surface Mount Mounting Pad
Dimensions and Considerations” for further details
on this subject.
32. Soldering
The T52X KO-CAP family has been designed for
reflow solder processes. Solder-coated terminations
have excellent wetting characteristics for high integrity
solder fillets. Preheating of these components is recommended to avoid extreme thermal stress. Pb (lead)
Free peak temperature is 260˚C (with up to 3x reflow
capabilities).
Sn-Pb Profile
300
Temperature (°C)
30. Termination Coating
KEMET’s standard termination finish is 100% Sn.
Standard terminations can be ordered with a “T”
suffix in the lead material designator of the KEMET
part number. Components ordered with the “T” suffix are Pb-Free/RoHS compliant and are backward
and forward compatible with SnPb and Pb-Free soldering processes.
Figure 5 illustrates pad geometry. The table provides recommended pad dimensions for reflow soldering techniques. These dimensions are intended
to be a starting point for circuit board designers, to
be fine tuned, if necessary, based upon the peculiarities of the soldering process and/or circuit board
design.
5 Sec.
250
200
150
45 Sec.
45 Sec.
100
90 Sec.
50
95 Sec.
0
0
50
60 Sec.
100
150
200
250
300
Time (Seconds)
Pb-Free Profile
260˚C Peak Temperature (3 Passes)
Y
Z
Table 6 - Land Pattern Dimensions for Reflow Solder
Pad Dimensions
KEMET/EIA Size Code
Y
C
Z
G
X (ref) (ref)
B/3528-21, T/3528-12
5.00 1.10 2.50 1.95 3.05
C/6032-28
7.60 2.50 2.50 2.55 5.05
D/7343-31, V/7343-20,
8.90 3.80 2.70 2.55 6.35
W/7343-15, X/7343-43,
Y/7343-40
48
Time/Temperature Soldering Profile
Hand-soldering should be avoided. If necessary, it
should be performed with care due to the difficulty
in process control. Care should be taken to avoid
contact of the soldering iron to the molded case.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CONDUCTIVE POLYMER CHIP CAPACITORS
During typical reflow operations a slight darkening
of the gold-colored epoxy may be observed. This
slight darkening is normal and is not harmful to the
product. Marking permanency is not affected by
this change.
The EIA standards for conductive polymer capacitors allows an ESR movement to 1.1 times (or 3 milliohms, whichever is greater) the catalog limit past
mounting.
33. Washing
Standard washing techniques and solvents are
compatible with all KEMET surface mount tantalum
capacitors. Solvents such as Freon TMC and TMS,
Trichlorethane, methylene chloride, prelete, and isopropyl alcohol are not harmful to these components. Please note that we are not endorsing the
use of banned or restricted solvents. We are simply
stating that they would not be harmful to the components.
If ultrasonic agitation is utilized in the cleaning
process, care should be taken to minimize energy
levels and exposure times to avoid damage to the
terminations.
KEMET tantalum chips are also compatible with
newer aqueous and semi-aqueous processes.
34. Encapsulations
Under normal circumstances, potting or encapsulation of KEMET tantalum chips is not required.
Polymer chip capacitors should be stored in normal
working environments. While the chips themselves
are quite robust in other environments, solderability
will be degraded by exposure to high temperatures,
high humidity, corrosive atmospheres, and long
term storage. In addition, packaging materials will
be degraded by high temperature - reels may soften or warp, and tape peel force may increase.
KEMET recommends that maximum storage temperature not exceed 40 degrees C, and the maximum storage humidity not exceed 60% relative
humidity. In addition, temperature fluctuations
should be minimized to avoid condensation on the
parts, and atmospheres should be free of chlorine
and sulfur bearing compounds. For optimized solderability, chip stock should be used promptly,
preferably within 1.5 years of receipt.
Conductive Polymer Surface Mount
The iron should be used to heat the solder pad,
applying solder between the pad and the termination, until reflow occurs. The iron should be
removed. “Wiping” the edges of a chip and heating
the top surface is not recommended.
COMPONENT WEIGHTS
Series
Case Size
Typical Weight
(mg)
T52x
T52x
T52x
T52x
T52x
T52x
T52x
T52x
T530
T530
T530
T530
A/3216-18
B/3528-21
C/6032-28
D/7343-31
X/7343-43
T/3528-12
W/7343-15
V/7343-20
D/7343-31
Y/7343-40
X/7343-43
E/7360-38
35
65
130
325
500
38
172
210
342
480
515
650
35. Storage Environment
Conductive polymer series (T520, T525, T530) are
shipped in moisture barrier bags with a desiccant
and moisture indicator card. These series are classified as MSL (Moisture Sensitivity Level 3). Upon
opening the moisture barrier bag, parts should be
mounted within 7 days to prevent moisture absorption and outgassing. If the 7 day window is exceeded, the parts can be baked per the instructions on
the bag (168 hours at 40±5ºC).
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
49
CONDUCTIVE POLYMER CHIP CAPACITORS
T520 Series - KO Cap
FEATURES
Polymer Cathode Technology
• Low ESR
• High Frequency Cap Retention
• No-Ignition Failure Mode
• Use Up to 90% of Rated Voltage (10% Derating)
for part types ≤ 10 Volts
• Halogen Free Epoxy
• 100% Accelerated Steady State Aging
• Volumetrically Efficient
•
Use Up to 80% of Rated Voltage (20% Derating)
for part types > 10 Volts
• Capacitance 15 to 1000μF (±20%)
• Voltage 2V to 25V
• EIA Standard Case Sizes
• 100% Surge Current Tested
• Operating Temperature -55ºC to +105ºC
• Self Healing Mechanism
• RoHS Compiant & Leadfree Terminations (see
www.kemet.com for lead transition)
•
OUTLINE DRAWING
CATHODE (-) END
VIEW
SIDE VIEW
ANODE (+) END
VIEW
BOTTOM VIEW
W
H
E
K
F
T
X
S
G
A
L
S
DIMENSIONS - MILLIMETERS
Case Size
KEMET EIA
A
3216-18
T
3528-12
B
3528-21
C
6032-28
U
6032-15
W
7343-15
V
7343-20
D
7343-31
Y
7343-40
X
7343-43
3.2
3.5
3.5
6.0
6.0
7.3
7.3
7.3
7.3
7.3
L
± 0.2
± 0.2
± 0.2
± 0.3
± 0.3
± 0.3
± 0.3
± 0.3
± 0.3
± 0.3
1.6
2.8
2.8
3.2
3.2
4.3
4.3
4.3
4.3
4.3
W
± 0.2
± 0.2
± 0.2
± 0.3
± 0.3
± 0.3
± 0.3
± 0.3
± 0.3
± 0.3
H
1.6 ± 0.2
1.2 max
1.9 ± 0.2
2.5 ± 0.3
1.5 max
1.5 max
1.9 max
2.8 ± 0.3
4.0 max
4.0 ± 0.3
K ± 0.20
0.9
0.3
0.9
1.4
0.5
0.6
0.9
1.5
1.9
2.3
F ± 0.1
1.2
2.2
2.2
2.2
2.2
2.4
2.4
2.4
2.4
2.4
S ± 0.3
0.8
0.8
0.8
1.3
1.3
1.3
1.3
1.3
1.3
1.3
X(Ref)
0.10 ± 0.10
0.05
0.10 ± 0.10
0.10 ± 0.10
0.05
0.05
0.05
0.10 ± 0.10
0.10 ± 0.10
0.10 ± 0.10
T(Ref)
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
0.13
A(Min)
1.4
2.1
2.1
3.1
3.1
3.8
3.8
3.8
3.8
3.8
G(ref)
1.1
1.8
1.8
2.8
2.8
3.5
3.5
3.5
3.5
3.5
E(ref)
1.3
2.2
2.2
2.4
2.4
3.5
3.5
3.5
3.5
3.5
T520 ORDERING INFORMATION
T 520 V 157 M 006 A
S E015
ESR
Lead Material
Tantalum
Series
T - 100% Tin (Sn) Plated
H - Tin/Lead (SnPb 5% Pb minimum)
*S - Not recommended for new design
T520 - Low ESR Polymer
Case Size
Failure Rate
A, T, B, C, V, W, D, Y, X
A - Not Applicable
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
Voltage
Capacitance Tolerance
*See www.kemet.com for Pb Free transition information.
*Pb-free supply is not guaranteed with
the ‘S’ termination code.
This termination code not available
effective 15 July 2007.
KEMET
Organic
KO
Polarity (+)
Indicator
Rated
Voltage
157
6K
512
Picofarad
Code
KEMET ID
M = ± 20%
COMPONENT MARKING
PWC
*100% Tin
512 = 12th week of 2005
50
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
50
CONDUCTIVE POLYMER CHIP CAPACITORS
T520 Series - KO Cap
T520 RATINGS & PART NUMBER REFERENCE
CapaciCase
CapaciCase
tance µF
Size
tance µF
Size
KEMET Part Number
KEMET Part Number
ESR
ESR
DF%
DF%
@@
DCDC
m: @
mΩ @
25°C
Leakage
25°C
Leakage
25°C
25°C
120 Hz
µA @ 25°C
µA @ 25°C 120 Hz
100 kHz
Max 100 kHz
Max
Max
Max
Max
Max
Ripple Current
Ripple
Current
Arms
Arms @
@
100 kHz
100
kHz Max
Max
w/'T=20°C
w/ΔT=20°C
@ -55°C
@ -55°C
to 85°C
to 85°C
w/'T= 2°C
w/ΔT= 2°C
@ 105°C
@ 105°C
2 Volt Rating @ 105°C
2 Volt Rating @ 105°C
T520V477M002A(1)E040
94
10
40
1.8
0.6
T520V477M002A(1)E040 2.5 Volt Rating
94 @ 105°C 10
40
1.8
0.6
2.5 Volt Rating12
@ 105°C
47.0
A
T520A476M2R5A(1)E090
8
90
0.9
0.3
47.0
A T
T520A476M2R5A(1)E090
12 14
8 6
9040
0.9
56.0
T520T566M2R5A(1)E040
1.3
0.40.3
56.0
T T
T520T566M2R5A(1)E040
14 14
6 8
4070
1.3
56.0
T520T566M2R5A(1)E070
1.0
0.30.4
56.0
T A
T520T566M2R5A(1)E070
14 17
8 8
7070
1.0
68.0
T520A686M2R5A(1)E070
1.0
0.30.3
68.0
A A
T520A686M2R5A(1)E070
17 17
8 8
7080
1.0
68.0
T520A686M2R5A(1)E080
1.0
0.30.3
68.0
A T
T520A686M2R5A(1)E080
17 25
8 8
8070
1.0
100.0
T520T107M2R5A(1)E070
1.0
0.30.3
100.0
T B
T520T107M2R5A(1)E070
25 25
8 8
7035
1.0
100.0
T520B107M2R5A(1)E035
1.6
0.50.3
100.0
B B
T520B107M2R5A(1)E025
25 25
8 8
2540
1.8
100.0
T520B107M2R5A(1)E040
1.5
0.50.6
100.0
T520B107M2R5A(1)E070
1.1
0.30.5
100.0
B B
T520B107M2R5A(1)E035
25 25
8 8
3570
1.6
150.0
T520U157M2R5A(1)E055
1.3
0.40.5
100.0
B U
T520B107M2R5A(1)E040
25 38
8 8
4055
1.5
220.0
T520B227M2R5A(1)E025
1.8
0.60.3
100.0
B B
T520B107M2R5A(1)E070
25 55
8 8
7025
1.1
220.0
T520B227M2R5A(1)E030
1.7
0.50.4
150.0
U B
T520U157M2R5A(1)E055
38 55
8 8
5530
1.3
220.0
T520B227M2R5A(1)E035
1.6
0.50.6
220.0
B B
T520B227M2R5A(1)E025
55 55
8 8
2535
1.8
220.0
T520B227M2R5A(1)E070
1.1
0.30.5
220.0
B B
T520B227M2R5A(1)E030
55 55
8 8
3070
1.7
220.0
T520C227M2R5A(1)E025
2.1
0.70.5
220.0
B C
T520B227M2R5A(1)E035
55 55
8 8
3525
1.6
220.0
C
T520C227M2R5A(1)E045
55
8
45
1.6
0.5
220.0
B
T520B227M2R5A(1)E070
55
8
70
1.1
0.3
220.0
T520V227M2R5A(1)E007
4.2
1.30.7
220.0
C V
T520C227M2R5A(1)E025
55 55
8 10
25 7
2.1
220.0
V
T520V227M2R5A(1)E009
55
10
9
3.7
1.2
220.0
C
T520C227M2R5A(1)E045
55
8
45
1.6
0.5
220.0
V
T520V227M2R5A(1)E012
55
10
12
3.2
1.0
220.0
V
T520V227M2R5A(1)E007
55
10
7
4.2
1.3
220.0
V
T520V227M2R5A(1)E015
55
10
15
2.9
0.9
220.0
V
T520V227M2R5A(1)E009
55
10
9
3.7
1.2
220.0
V
T520V227M2R5A(1)E025
55
10
25
2.2
0.7
220.0
V
T520V227M2R5A(1)E012
55
10
12
3.2
1.0
220.0
V
T520V227M2R5A(1)E045
55
10
45
1.7
0.5
220.0
V
T520V227M2R5A(1)E015
55
10
15
2.9
0.9
220.0
D
T520D227M2R5A(1)E007
55
10
7
4.6
1.5
220.0
V D
T520V227M2R5A(1)E025
55 55
10 10
2540
2.2
220.0
T520D227M2R5A(1)E040
1.9
0.60.7
220.0
V B
T520V227M2R5A(1)E045
55 83
10 8
4545
1.7
330.0
T520B337M2R5A(1)E045
1.4
0.40.5
220.0
D B
T520D227M2R5A(1)E007
55 83
10 8
7 70
4.6
330.0
T520B337M2R5A(1)E070
1.1
0.31.5
220.0
D C
T520D227M2R5A(1)E040
55 83
10 8
4015
1.9
330.0
T520C337M2R5A(1)E015
2.7
0.80.6
330.0
B C
T520B337M2R5A(1)E045
83 83
8 8
4518
1.4
330.0
T520C337M2R5A(1)E018
2.4
0.80.4
330.0
B C
T520B337M2R5A(1)E070
83 83
8 8
7025
1.1
330.0
T520C337M2R5A(1)E025
2.1
0.70.3
330.0
C C
T520C337M2R5A(1)E015
83 83
8 8
1545
2.7
330.0
T520C337M2R5A(1)E045
1.6
0.50.8
330.0
C W
T520C337M2R5A(1)E018
83 83
8 10
1840
2.4
330.0
T520W337M2R5A(1)E040
1.7
0.50.8
330.0
C V
T520C337M2R5A(1)E025
83 83
8 10
25 6
2.1
330.0
T520V337M2R5A(1)E006
4.6
1.40.7
330.0
T520V337M2R5A(1)E007
4.2
1.30.5
330.0
C V
T520C337M2R5A(1)E045
83 83
8 10
45 7
1.6
330.0
T520V337M2R5A(1)E009
3.7
1.20.5
330.0
W V
T520W337M2R5A(1)E040
83 83
10 10
40 9
1.7
330.0
T520V337M2R5A(1)E012
3.2
1.01.4
330.0
V V
T520V337M2R5A(1)E006
83 83
10 10
6 12
4.6
330.0
T520V337M2R5A(1)E015
2.9
0.91.3
330.0
V V
T520V337M2R5A(1)E007
83 83
10 10
7 15
4.2
330.0
T520V337M2R5A(1)E018
2.6
0.81.2
330.0
V V
T520V337M2R5A(1)E009
83 83
10 10
9 18
3.7
330.0
T520V337M2R5A(1)E025
2.2
0.71.0
330.0
V V
T520V337M2R5A(1)E012
83 83
10 10
1225
3.2
330.0
V
T520V337M2R5A(1)E040
83
10
40
1.8
0.60.9
330.0
V
T520V337M2R5A(1)E015
83
10
15
2.9
330.0
T520D337M2R5A(1)E006
5.0
1.70.8
330.0
V D
T520V337M2R5A(1)E018
83 83
10 10
18 6
2.6
330.0
D
T520D337M2R5A(1)E007
83
10
7
4.6
1.50.7
330.0
V
T520V337M2R5A(1)E025
83
10
25
2.2
470.0
V
T520V477M2R5A(1)E007
118
10
7
4.2
1.3
330.0
V
T520V337M2R5A(1)E040
83
10
40
1.8
0.6
470.0
V
T520V477M2R5A(1)E009
118
10
9
3.7
1.2
330.0
D
T520D337M2R5A(1)E006
83
10
6
5.0
1.7
470.0
V
T520V477M2R5A(1)E012
118
10
12
3.2
1.0
330.0
D
T520D337M2R5A(1)E007
83
10
7
4.6
1.5
470.0
V
T520V477M2R5A(1)E015
118
10
15
2.9
0.9
470.0
V
T520V477M2R5A(1)E007
118
10
7
4.2
1.3
470.0
V
T520V477M2R5A(1)E018
118
10
18
2.6
0.8
470.0
V
T520V477M2R5A(1)E009
118
10
9
3.7
1.2
470.0
C
T520C477M2R5A(1)E025
118
8
25
2.0
0.6
470.0
V C
T520V477M2R5A(1)E012
118118
10 8
1245
3.2
470.0
T520C477M2R5A(1)E045
1.5
0.51.0
470.0
V
T520V477M2R5A(1)E015
118
10
15
2.9
0.9
470.0
D
T520D477M2R5A(1)E006
118
10
6
5.0
1.7
470.0
V D
T520V477M2R5A(1)E018
118118
10 10
18 7
2.6
470.0
T520D477M2R5A(1)E007
4.6
1.50.8
470.0
C D
T520C477M2R5A(1)E025
118118
8 10
25 9
2.0
470.0
T520D477M2R5A(1)E009
4.1
1.30.6
470.0
C D
T520C477M2R5A(1)E045
118170
8 10
4510
1.5
680.0
T520D687M2R5A(1)E010
3.9
1.20.5
470.0
D D
T520D477M2R5A(1)E006
118170
10 10
6 15
5.0
680.0
T520D687M2R5A(1)E015
3.2
1.01.7
470.0
D D
T520D477M2R5A(1)E007
118170
10 10
7 40
4.6
680.0
T520D687M2R5A(1)E040
1.9
0.61.5
470.0
D Y
T520D477M2R5A(1)E009
118170
10 10
9 15
4.1
680.0
T520Y687M2R5A(1)E015
3.3
1.01.3
680.0
D Y
T520D687M2R5A(1)E010
170170
10 10
1025
3.9
680.0
T520Y687M2R5A(1)E025
2.5
0.81.2
680.0
D D
T520D687M2R5A(1)E015
170250
10 8
1515
3.2
1000.0
T520D108M2R5A(1)E015
3.2
1.11.0
1000.0
T520D108M2R5A(1)E030
2.2
0.70.6
680.0
D D
T520D687M2R5A(1)E040
170250
10 10
4030
1.9
1000.0
T520Y108M2R5A(1)E010
4.0
1.31.0
680.0
Y Y
T520Y687M2R5A(1)E015
170250
10 10
1510
3.3
1000.0
T520Y108M2R5A(1)E015
3.3
1.00.8
680.0
Y Y
T520Y687M2R5A(1)E025
170250
10 10
2515
2.5
1000.0
T520Y108M2R5A(1)E025
2.5
0.81.1
1000.0
D Y
T520D108M2R5A(1)E015
250250
8 10
1525
3.2
1000.0
T520X108M2R5A(1)E010
4.1
1.30.7
1000.0
D X
T520D108M2R5A(1)E030
250250
10 10
3010
2.2
1000.0
Y
T520Y108M2R5A(1)E010 3 Volt Rating
250 @ 105°C 10
10
4.0
1.3
100.0
B
T520B107M003A(1)E035
30
8
35
1.6
0.51.0
1000.0
Y
T520Y108M2R5A(1)E015
250
10
15
3.3
100.0
T520B107M003A(1)E040
1.5
0.50.8
1000.0
Y B
T520Y108M2R5A(1)E025
25030
10 8
2540
2.5
100.0
T520B107M003A(1)E070
1.1
0.31.3
1000.0
X B
T520X108M2R5A(1)E010
25030
10 8
1070
4.1
150.0
B
T520B157M003A(1)E035
8
35
1.6
0.5
3 Volt Rating 45
@ 105°C
150.0
B
T520B157M003A(1)E040
45
8
40
1.5
0.5
100.0
B
T520B107M003A(1)E025
30
8
25
1.8
0.6
150.0
B
T520B157M003A(1)E070
45
8
70
1.1
0.3
100.0
B
T520B107M003A(1)E035
30
8
35
1.6
0.5
330.0
V
T520V337M003A(1)E009
99
10
9
3.7
1.2
100.0
B
T520B107M003A(1)E040
30
8
40
1.5
0.5
330.0
V
T520V337M003A(1)E012
99
10
12
3.2
1.0
100.0
B
T520B107M003A(1)E070
30
8
70
1.1
330.0
V
T520V337M003A(1)E015
99
10
15
2.9
0.90.3
150.0
B V
T520B157M003A(1)E035
45 99
8 10
3525
1.6
330.0
T520V337M003A(1)E025
2.2
0.70.5
150.0
B D
T520B157M003A(1)E040
45204
8 10
4015
1.5
680.0
T520D687M003A(1)E015
3.2
1.00.5
150.0
B D
T520B157M003A(1)E070
45204
8 10
7040
1.1
680.0
T520D687M003A(1)E040
1.9
0.60.3
330.0
V X
T520V337M003A(1)E009
99300
10 10
9 15
3.7
1000.0
T520X108M003A(1)E015
3.3
1.01.2
330.0
V X
T520V337M003A(1)E012
99300
10 10
1230
3.2
1000.0
T520X108M003A(1)E030
2.3
0.71.0
330.0
V
T520V337M003A(1)E015 4 Volt Rating
99 @ 105°C 10
15
2.9
0.9
330.0
V T
T520V337M003A(1)E025
99 6
10 8
25100
2.2
15.0
T520T156M004A(1)E100
0.8
0.30.7
680.0
D A
T520D687M003A(1)E015
20413
10 8
1570
3.2
33.0
T520A336M004A(1)E070
1.0
0.31.0
680.0
D A
T520D687M003A(1)E040
20413
10 8
4080
1.9
33.0
T520A336M004A(1)E080
1.0
0.30.6
47.0
T520A476M004A(1)E070
1.0
0.31.0
1000.0
X A
T520X108M003A(1)E015
30019
10 8
1570
3.3
47.0
T520A476M004A(1)E080
1.0
0.30.7
1000.0
X A
T520X108M003A(1)E030
30019
10 8
3080
2.3
47.0
T
T520T476M004A(1)E070
8
70
1.0
0.3
4 Volt Rating 19
@ 105°C
68.0
T520T686M004A(1)E070
1.0
0.30.3
15.0
T T
T520T156M004A(1)E100
6 27
8 8
10070
0.8
68.0
T520B686M004A(1)E035
1.6
0.50.3
33.0
A B
T520A336M004A(1)E070
13 27
8 8
7035
1.0
68.0
T520B686M004A(1)E040
1.5
0.50.3
33.0
A B
T520A336M004A(1)E080
13 27
8 8
8040
1.0
68.0
T520B686M004A(1)E070
1.1
0.30.3
47.0
A B
T520A476M004A(1)E070
19 27
8 8
7070
1.0
68.0
U
T520U686M004A(1)E055
27
8
55
1.3
0.4
47.0
A
T520A476M004A(1)E080
19
8
80
1.0
0.3
100.0
B
T520B107M004A(1)E035
40
8
35
1.6
0.5
47.0
T
T520T476M004A(1)E070
19
8
70
1.0
0.3
100.0
B
T520B107M004A(1)E040
40
8
40
1.5
0.5
68.0
T
T520T686M004A(1)E070
27
8
70
1.0
0.3
100.0
B
T520B107M004A(1)E070
40
8
70
1.1
0.3
68.0
B
T520B686M004A(1)E035
27
8
35
1.6
0.5
100.0
U
T520U107M004A(1)E055
40
8
55
1.3
0.4
68.0
B
T520B686M004A(1)E040
27
8
40
1.5
0.5
150.0
B
T520B157M004A(1)E025
60
8
25
1.8
0.6
68.0
B
T520B686M004A(1)E070
27
8
70
1.1
0.3
150.0
B
T520B157M004A(1)E030
60
8
30
1.7
0.5
68.0
U B
T520U686M004A(1)E055
27 60
8 8
5535
1.3
150.0
T520B157M004A(1)E035
1.6
0.50.4
100.0
B
T520B107M004A(1)E025
40
8
25
1.8
0.6
150.0
B
T520B157M004A(1)E040
60
8
40
1.5
0.5
100.0
B B
T520B107M004A(1)E035
40 60
8 8
3570
1.6
150.0
T520B157M004A(1)E070
1.1
0.30.5
100.0
B U
T520B107M004A(1)E040
40 60
8 8
4055
1.5
150.0
T520U157M004A(1)E055
1.3
0.40.5
100.0
B C
T520B107M004A(1)E070
40 60
8 8
7015
1.1
150.0
T520C157M004A(1)E015
2.7
0.90.3
100.0
U C
T520U107M004A(1)E055
40 60
8 8
5525
1.3
150.0
T520C157M004A(1)E025
2.1
0.70.4
C
T520C157M004A(1)E045
8
1.6 voltage0.5
(1) To150.0
complete KEMET
part
number, insert letter designation60for lead material
from 45
page 50. Higher
V
V
Conductive Polmer Surface Mount
470.0
470.0
ratings and tighter tolerance product may be susbstituted with the same size as KEMET’s option. Voltage
substitutions will be marked with the higher voltage rating.
product may be substituted within the same size at KEMET’S option. Voltage substitutions will be marked with the higher voltage rating.
©KEMET ElectronicsT520V477M002
Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
51
CONDUCTIVE POLYMER CHIP CAPACITORS
T520 Series - KO Cap
T520 RATINGS & PART NUMBER REFERENCE
Case
Size
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
470.0
470.0
470.0
470.0
470.0
470.0
680.0
680.0
680.0
680.0
680.0
680.0
680.0
680.0
680.0
B
B
B
U
C
C
C
C
V
V
V
V
V
D
B
B
B
C
C
C
C
C
W
V
V
V
V
V
V
V
V
D
D
D
D
C
V
V
V
V
V
V
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
Y
Y
Y
X
X
X
15.0
22.0
22.0
33.0
33.0
33.0
33.0
33.0
33.0
47.0
47.0
47.0
47.0
47.0
68.0
68.0
68.0
68.0
68.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
120.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
150.0
220.0
220.0
220.0
220.0
T
A
A
A
A
T
B
B
B
T
T
B
B
B
B
B
B
B
U
B
B
B
U
W
V
V
V
V
V
C
C
D
B
B
B
B
C
C
W
V
V
V
V
V
V
V
D
D
D
D
D
C
C
C
C
KEMET Part Number
DC
Leakage
µA @ 25°C
Max
DF% @
25°C
120 Hz
Max
4 Volt Rating @ 105°C cont.
T520B157M004A(1)E035
60
8
T520B157M004A(1)E040
60
8
T520B157M004A(1)E070
60
8
T520U157M004A(1)E055
60
8
T520C157M004A(1)E015
60
8
T520C157M004A(1)E025
60
8
T520C157M004A(1)E045
60
8
60
8
T520C157M004A(1)E100
T520V157M004A(1)E007
60
10
T520V157M004A(1)E009
60
10
T520V157M004A(1)E012
60
10
T520V157M004A(1)E015
60
10
T520V157M004A(1)E025
60
10
60
10
T520D157M004A(1)E007
T520B227M004A(1)E035
88
8
88
8
T520B227M004A(1)E045
88
8
T520B227M004A(1)E070
88
8
T520C227M004A(1)E015
88
8
T520C227M004A(1)E018
88
8
T520C227M004A(1)E025
88
8
T520C227M004A(1)E045
88
8
T520C227M004A(1)E055
88
10
T520W227M004A(1)E040
T520V227M004A(1)E007
88
10
T520V227M004A(1)E009
88
10
T520V227M004A(1)E012
88
10
T520V227M004A(1)E015
88
10
T520V227M004A(1)E018
88
10
T520V227M004A(1)E025
88
10
T520V227M004A(1)E040
88
10
T520V227M004A(1)E045
88
10
88
10
T520D227M004A(1)E006
88
10
T520D227M004A(1)E007
88
10
T520D227M004A(1)E012
T520D227M004A(1)E065
88
10
132
8
T520C337M004A(1)E025
T520V337M004A(1)E007
132
10
T520V337M004A(1)E009
132
10
T520V337M004A(1)E012
132
10
T520V337M004A(1)E018
132
10
T520V337M004A(1)E025
132
10
T520V337M004A(1)E040
132
10
132
10
T520D337M004A(1)E006
132
10
T520D337M004A(1)E007
132
10
T520D337M004A(1)E009
132
10
T520D337M004A(1)E012
132
10
T520D337M004A(1)E015
132
10
T520D337M004A(1)E040
132
8
T520D337M004A(1)E045
188
10
T520D477M004A(1)E010
188
10
T520D477M004A(1)E012
188
10
T520D477M004A(1)E015
188
10
T520D477M004A(1)E018
188
10
T520D477M004A(1)E025
188
10
T520D477M004A(1)E040
272
10
T520D687M004A(1)E012
272
10
T520D687M004A(1)E015
272
10
T520D687M004A(1)E025
T520Y687M004A(1)E010
272
10
T520Y687M004A(1)E015
272
10
T520Y687M004A(1)E025
272
10
T520X687M004A(1)E010
272
10
T520X687M004A(1)E015
272
10
T520X687M004A(1)E035
272
10
6.3 Volt Rating @ 105°C
9.5
8
T520T156M006A(1)E100
T520A226M006A(1)E090
14
8
T520A226M006A(1)E100
14
8
T520A336M006A(1)E070
21
8
T520A336M006A(1)E080
21
8
21
8
T520T336M006A(1)E070
21
8
T520B336M006A(1)E035
21
8
T520B336M006A(1)E040
21
8
T520B336M006A(1)E070
30
8
T520T476M006A(1)E040
30
8
T520T476M006A(1)E070
30
8
T520B476M006A(1)E035
30
8
T520B476M006A(1)E040
30
8
T520B476M006A(1)E070
43
8
T520B686M006A(1)E025
43
8
T520B686M006A(1)E035
43
8
T520B686M006A(1)E040
43
8
T520B686M006A(1)E070
43
8
T520U686M006A(1)E055
T520B107M006A(1)E040
63
8
63
8
T520B107M006A(1)E045
63
8
T520B107M006A(1)E070
T520U107M006A(1)E055
63
8
63
10
T520W107M006A(1)E040
T520V107M006A(1)E007
63
10
T520V107M006A(1)E009
63
10
T520V107M006A(1)E012
63
10
T520V107M006A(1)E015
63
10
T520V107M006A(1)E045
63
10
63
8
T520C107M006A(1)E025
63
8
T520C107M006A(1)E045
T520D107M006A(1)E007
63
10
76
8
T520B127M006A(1)E035
95
8
T520B157M006A(1)E035
95
8
T520B157M006A(1)E045
95
8
T520B157M006A(1)E070
T520C157M006A(1)E025
95
8
95
8
T520C157M006A(1)E045
95
10
T520W157M006A(1)E040
T520V157M006A(1)E007
95
10
T520V157M006A(1)E009
95
10
T520V157M006A(1)E012
95
10
T520V157M006A(1)E015
95
10
T520V157M006A(1)E025
95
10
T520V157M006A(1)E040
95
10
T520V157M006A(1)E045
95
10
95
10
T520D157M006A(1)E006
95
10
T520D157M006A(1)E007
95
10
T520D157M006A(1)E015
95
10
T520D157M006A(1)E025
95
10
T520D157M006A(1)E055
139
8
T520C227M006A(1)E015
T520C227M006A(1)E018
139
8
139
8
T520C227M006A(1)E025
139
8
T520C227M006A(1)E045
ESR
mΩ @
25°C
100 kHz
Max
Ripple Current
Arms @
100 kHz Max
w/ΔT=20°C
@ -55°C
to 85°C
w/ΔT= 2°C
@ 105°C
35
40
70
55
15
25
45
100
7
9
12
15
25
7
35
45
70
15
18
25
45
55
40
7
9
12
15
18
25
40
45
6
7
12
65
25
7
9
12
18
25
40
6
7
9
12
15
40
45
10
12
15
18
25
40
12
15
25
10
15
25
10
15
35
1.6
1.5
1.1
1.3
2.7
2.1
1.6
1.0
4.2
3.7
3.2
2.9
2.2
4.6
1.6
1.4
1.1
2.7
2.5
2.1
1.6
1.4
1.7
4.2
3.7
3.2
2.9
2.6
2.2
1.8
1.7
5.0
4.6
3.5
1.5
2.0
4.2
3.7
3.2
2.6
2.2
1.8
5.0
4.6
4.1
3.5
3.2
1.9
1.5
3.9
3.5
3.2
2.9
2.4
1.9
3.5
3.2
2.4
4.0
3.3
2.5
4.1
3.3
2.2
0.5
0.5
0.3
0.4
0.9
0.7
0.5
0.3
1.3
1.2
1.0
0.9
0.7
1.5
0.5
0.4
0.3
0.9
0.8
0.7
0.5
0.4
0.5
1.3
1.2
1.0
0.9
0.8
0.7
0.6
0.5
1.7
1.5
1.1
0.5
0.6
1.3
1.2
1.0
0.8
0.7
0.6
1.7
1.5
1.3
1.1
1.0
0.6
0.5
1.2
1.1
1.0
0.9
0.8
0.6
1.2
1.1
0.8
1.3
1.0
0.8
1.3
1.0
0.7
100
90
100
70
80
70
35
40
70
40
70
35
40
70
25
35
40
70
55
40
45
70
55
40
7
9
12
15
45
25
45
7
35
35
45
70
25
45
40
7
9
12
15
25
40
45
6
7
15
25
55
15
18
25
45
0.8
0.9
0.9
1.0
1.0
0.9
1.5
1.5
1.1
1.3
1.0
1.6
1.5
1.1
1.8
2.4
1.5
1.1
1.3
1.5
1.4
1.1
1.3
1.7
4.2
3.7
3.2
2.9
1.7
2.1
1.6
4.6
1.5
1.6
1.4
1.1
2.1
1.6
1.7
4.2
3.7
3.2
2.9
2.2
1.8
1.7
5.0
4.6
3.2
2.4
1.7
2.7
2.5
2.0
1.5
0.3
0.3
0.3
0.3
0.3
0.4
0.5
0.5
0.3
0.4
0.3
0.5
0.5
0.3
0.6
0.5
0.5
0.3
0.4
0.5
0.4
0.3
0.4
0.5
1.3
1.2
1.0
0.9
0.5
0.7
0.5
1.5
0.5
0.5
0.4
0.3
0.7
0.5
0.5
1.3
1.2
1.0
0.9
0.7
0.6
0.5
1.7
1.5
1.0
0.8
0.5
0.9
0.8
0.6
0.5
(1) To complete KEMET part number, insert letter designation for lead material from page 50. Higher voltage
product may be substituted
the same
size
at KEMET’S
option. Voltage
will be marked
with the higher voltage rating.
ratingswithin
and tighter
tolerance
product
may be susbstituted
with thesubstitutions
same size as KEMET’s
option. Voltage
substitutions will be marked with the higher voltage rating.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
2 Volt Rating @ 105°C
Conductive Polymer Surface Mount
Capacitance µF
CONDUCTIVE POLYMER CHIP CAPACITORS
T520 Series - KO Cap
T520 RATINGS & PART NUMBER REFERENCE
Case
Size
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
220.0
V
V
V
V
V
V
D
D
D
D
D
D
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
330.0
470.0
470.0
470.0
470.0
470.0
470.0
470.0
470.0
470.0
470.0
470.0
V
V
V
V
V
D
D
D
D
D
D
D
Y
Y
Y
Y
Y
Y
Y
Y
D
D
X
X
X
X
33.0
33.0
33.0
33.0
33.0
33.0
47.0
47.0
82.0
82.0
150.0
150.0
150.0
150.0
T
T
B
B
B
U
B
B
C
C
D
D
D
V
10.0
15.0
22.0
33.0
33.0
33.0
33.0
33.0
33.0
47.0
47.0
47.0
68.0
68.0
68.0
68.0
68.0
68.0
68.0
68.0
68.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
100.0
150.0
150.0
150.0
220.0
220.0
220.0
220.0
330.0
330.0
330.0
330.0
330.0
A
A
A
T
T
B
B
B
U
B
B
U
W
W
C
V
V
V
V
V
D
C
C
W
V
V
V
V
D
D
D
D
D
D
Y
D
D
D
Y
Y
X
X
X
33.0
33.0
33.0
33.0
47.0
47.0
47.0
47.0
47.0
68.0
150.0
W
V
V
V
W
V
V
D
D
D
X
22.0
22.0
22.0
V
V
V
15.0
15.0
D
D
KEMET Part Number
DC
Leakage
µA @ 25°C
Max
DF% @
25°C
120 Hz
Max
6.3 Volt Rating @ 105°C cont.
T520V227M006A(1)E007
139
10
T520V227M006A(1)E009
139
10
T520V227M006A(1)E012
139
10
T520V227M006A(1)E015
139
10
T520V227M006A(1)E025
139
10
T520V227M006A(1)E040
139
10
T520D227M006A(1)E006
139
10
T520D227M006A(1)E007
139
10
139
10
T520D227M006A(1)E009
139
10
T520D227M006A(1)E015
139
10
T520D227M006A(1)E040
T520D227M006A(1)E050
139
10
6.3 Volt Rating @ 105°C
T520V337M006A(1)E015
208
10
T520V337M006A(1)E018
208
10
T520V337M006A(1)E025
208
10
T520V337M006A(1)E040
208
10
T520V337M006A(1)E045
208
10
208
10
T520D337M006A(1)E009
T520D337M006A(1)E010
208
10
208
10
T520D337M006A(1)E015
208
10
T520D337M006A(1)E018
208
10
T520D337M006A(1)E025
208
10
T520D337M006A(1)E040
208
10
T520D337M006A(1)E045
T520Y337M006A(1)E015
208
10
T520Y337M006A(1)E025
208
10
T520Y337M006A(1)E040
208
10
T520Y477M006A(1)E010
296
10
T520Y477M006A(1)E015
296
10
T520Y477M006A(1)E018
296
10
T520Y477M006A(1)E025
296
10
T520Y477M006A(1)E035
296
10
296
10
T520D477M006A(1)E025
296
10
T520D477M006A(1)E030
T520X477M006A(1)E010
296
10
T520X477M006A(1)E018
296
10
T520X477M006A(1)E035
296
10
T520X477M006A(1)E040
296
10
8 Volt Rating @ 105°C
26
8
T520T336M008A(1)E070
26
8
T520T336M008A(1)E080
26
15
T520B336M008A(1)E035
26
8
T520B336M008A(1)E040
26
8
T520B336M008A(1)E070
26
8
T520U336M008A(1)E070
38
8
T520B476M008A(1)E035
38
8
T520B476M008A(1)E070
82
8
T520C826M008A(1)E025
82
8
T520C826M008A(1)E045
120
10
T520D157M008A(1)E025
120
10
T520D157M008A(1)E040
120
10
T520D157M008A(1)E055
T520V157M008A(1)E040
120
10
10 Volt Rating @ 105°C
T520A106M010A(1)E080
10
8
T520A156M010A(1)E080
15
8
T520A226M010A(1)E080
22
8
33
8
T520T336M010A(1)E070
33
8
T520T336M010A(1)E080
33
8
T520B336M010A(1)E035
33
8
T520B336M010A(1)E040
33
8
T520B336M010A(1)E070
33
8
T520U336M010A(1)E070
47
8
T520B476M010A(1)E035
47
8
T520B476M010A(1)E070
47
8
T520U476M010A(1)E055
68
10
T520W686M010A(1)E025
68
10
T520W686M010A(1)E040
68
8
T520C686M010A(1)E045
T520V686M010A(1)E025
68
10
T520V686M010A(1)E040
68
10
T520V686M010A(1)E045
68
10
T520V686M010A(1)E060
68
10
T520V686M010A(1)E100
68
10
68
10
T520D686M010A(1)E100
100
8
T520C107M010A(1)E025
100
8
T520C107M010A(1)E045
100
10
T520W107M010A(1)E040
T520V107M010A(1)E018
100
10
T520V107M010A(1)E025
100
10
T520V107M010A(1)E045
100
10
T520V107M010A(1)E050
100
10
100
10
T520D107M010A(1)E018
100
10
T520D107M010A(1)E055
T520D107M010A(1)E080
100
10
150
10
T520D157M010A(1)E025
150
10
T520D157M010A(1)E040
150
10
T520D157M010A(1)E055
T520Y227M010A(1)E040
220
10
220
10
T520D227M010A(1)E018
220
10
T520D227M010A(1)E025
220
10
T520D227M010A(1)E040
T520Y337M010A(1)E015
330
10
T520Y337M010A(1)E035
330
10
T520X337M010A(1)E010
330
10
T520X337M010A(1)E025
330
10
T520X337M010A(1)E040
330
10
16 Volt Rating @ 105°C
T520W336M016A(1)E045
53
10
T520V336M016A(1)E045
53
10
T520V336M016A(1)E060
53
10
T520V336M016A(1)E070
53
10
T520W476M016A(1)E045
75
10
T520V476M016A(1)E045
75
10
T520V476M016A(1)E070
76
10
75
10
T520D476M016A(1)E035
T520D476M016A(1)E070
75
10
109
10
T520D686M016A(1)E050
T520X157M016A(1)E040
240
10
20 Volt Rating @ 105°C
T520V226M020A(1)E040
44
10
T520V226M020A(1)E045
44
10
T520V226M020A(1)E090
44
10
25 Volt Rating @ 105°C
T520D156M025A(1)E060
38
10
38
10
T520D156M025A(1)E080
ESR
mΩ @
25°C
100 kHz
Max
Ripple Current
Arms @
100 kHz Max
w/ΔT=20°C
@ -55°C
to 85°C
w/ΔT= 2°C
@ 105°C
7
9
12
15
25
40
6
7
9
15
40
50
4.2
3.7
3.2
2.9
2.2
1.8
5.0
4.6
4.1
3.2
1.9
1.7
1.3
1.2
1.0
0.9
0.7
0.6
1.7
1.5
1.3
1.0
0.6
0.5
15
18
25
40
45
9
10
15
18
25
40
45
15
25
40
10
15
18
25
35
25
30
10
18
35
40
2.8
2.6
2.2
1.8
1.7
4.1
3.9
3.2
2.9
2.4
1.9
1.8
3.3
2.5
2.0
4.0
3.3
3.0
2.5
2.1
2.4
2.2
4.1
3.0
2.2
2.0
0.9
0.8
0.7
0.6
0.5
1.4
1.2
1.1
0.9
0.8
0.6
0.6
1.0
0.8
0.6
1.3
1.0
0.9
0.8
0.7
0.8
0.7
1.3
1.0
0.7
0.6
70
80
35
40
70
70
35
70
66
66
25
40
55
40
1.0
0.9
1.5
1.5
1.1
1.1
1.6
1.1
2.1
1.5
2.4
1.9
1.7
3.1
0.3
0.3
0.5
0.5
0.3
0.4
0.5
0.3
0.6
0.2
0.8
0.6
0.5
1.0
80
80
80
70
80
35
40
70
70
35
70
55
25
40
45
25
40
45
60
100
100
25
45
40
18
25
45
50
18
55
80
25
40
55
40
18
25
40
15
35
10
25
40
1.0
1.0
0.9
1.0
0.9
1.5
1.5
1.1
1.1
1.6
1.1
1.2
2.2
1.7
1.6
2.2
1.8
1.7
1.4
1.1
1.2
2.1
1.5
1.7
2.6
2.2
1.7
1.6
2.9
1.7
1.4
2.4
1.9
1.7
2.0
2.9
2.4
1.9
3.3
2.1
4.1
2.6
2.0
0.3
0.3
0.3
0.3
0.3
0.5
0.5
0.3
0.4
0.5
0.3
0.4
0.7
0.5
0.5
0.7
0.6
0.5
0.5
0.4
0.4
0.4
0.5
0.5
0.8
0.7
0.5
0.5
0.9
0.5
0.4
0.8
0.6
0.5
0.6
0.9
0.8
0.6
1.0
0.4
1.3
0.8
0.6
60
45
60
70
45
45
70
35
70
50
40
1.6
1.7
1.4
1.9
1.6
1.7
1.3
2.1
1.5
1.7
2.6
0.5
0.5
0.5
0.4
0.5
0.5
0.4
0.7
0.5
0.5
0.8
40
45
90
1.8
1.6
1.2
0.6
0.2
0.4
60
80
1.6
1.4
0.5
0.4
(1) To complete KEMET part number, insert letter designation for lead material from page 50. Higher voltage
ratings and tighter tolerance product may be susbstituted with the same size as KEMET’s option. Voltage
substitutions will be marked with the higher voltage rating.
product may be substituted within the same size at KEMET’S option. Voltage substitutions will be marked with the higher voltage rating.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Conductive Polmer Surface Mount
Capacitance µF
CONDUCTIVE POLYMER CHIP CAPACITORS
T525 SERIES - High Temperature
FEATURES
Polymer Cathode Technology
125ºC Maximum Temperature Capability
High Frequency Capacitance Retention
Non-Ignition Failure Mode
Capacitance: 33 - 680μF
Voltage: 2.5 to 16 volts
Use up to 90% of Rated Voltage (10% Derating)
for part types ≤ 10 Volts
• Use up to 80% of Rated Voltage (20% Derating) for part
types >10 Volts
•
•
•
•
•
•
•
•
Operating Temperature -55ºC to +125ºC
100% Accelerated Steady State Aging
100% Surge Current Testing
Self-Healing Mechanism
Volumetrically Efficient
Extremely Stable ESR at 125ºC
EIA Standard Case Size
RoHS Compliant / Leadfree Termination
(See www.kemet.com for lead transition)
Conductive Polymer Surface Mount
•
•
•
•
•
•
•
OUTLINE DRAWING
CATHODE (-) END
VIEW
SIDE VIEW
ANODE (+) END
VIEW
BOTTOM VIEW
W
H
E
K
F
T
X
S
G
A
L
S
DIMENSIONS - MILLIMETERS
Case Size
KEMET
T
B
D
EIA
3528-12
3528-21
7343-31
L
W
H
K ±0.20
F ±0.1
S ±0.3
X (Ref)
T (Ref)
A (Min)
3.5 ± 0.2
3.5 ± 0.2
7.3 ± 0.3
2.8 ± 0.2
2.8 ± 0.2
4.3 ± 0.3
1.2 max.
1.9 ± 0.1
2.8 ± 0.3
0.3
0.9
1.5
2.2
2.2
2.4
0.8
0.8
1.3
0.05
0.10 ± 0.10
0.10 ± 0.10
0.13
0.13
0.13
2.1
2.1
3.8
G (Ref) E (Ref)
1.8
1.8
3.5
RECOMMENDED TEMPERATURE/VOLTAGE DERATING
T525 Temperature/Application
Recommended Voltage Derating
100%
% Rated Voltage
90%
80%
100%
100%
90%
90%
90%
90%
80%
80%
80%
80%
100%
100%
T525 Rated Voltage with temperature derating
T525 Recommended
Application Voltage with temperature derating
(Vr<10VDC)
T525 Recommended
Application Voltage with temperature derating
(Vr>10VDC)
70%
67%
60%
60%
53%
50%
-55
25
85
105
125
Temperature (˚ C)
COMPONENT MARKING
KEMET High
Temperature
Tantalum
Polymer (KT)
Rated
Voltage
KT
477
4K
504
Polarity
Indicator (+)
(Solid Stripe)
Picofarad Code
KEMET I.D. Symbol
PWC
504=4th week of 2005
54
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
2.2
2.2
3.5
CONDUCTIVE POLYMER CHIP CAPACITORS
T525 SERIES - High Temperature
T525 RATINGS & PART NUMBER REFERENCE
Case
Size
100.0
330.0
470.0
680.0
T
D
D
D
100.0
150.0
330.0
470.0
680.0
B
B
D
D
D
68.0
68.0
100.0
220.0
330.0
470.0
470.0
T
B
B
D
D
D
D
33.0
47.0
47.0
68.0
150.0
220.0
330.0
330.0
B
T
B
B
D
D
D
D
33.0
T
22.0
33.0
33.0
100.0
100.0
150.0
150.0
220.0
B
T
B
D
D
D
D
D
47.0
47.0
D
D
KEMET Part Number
DF%
@ 25°C
120 Hz
Max
ESR m:
@ 25°C
100 kHz
Max
2.5 Volt Rating at 105°C (1.7 Volt Rating at 125°C)
T525T107M2R5A(1)E080
25
8.0
T525D337M2R5A(1)E025
83
10.0
T525D477M2R5A(1)E025
118
10.0
T525D687M2R5A(1)E025
170
10.0
3 Volt Rating at 105°C (2 Volt Rating at 125°C)
T525B107M003A(1)E080
30
8.0
T525B157M003A(1)E080
45
8.0
T525D337M003A(1)E025
99
10.0
T525D477M003A(1)E025
141
10.0
T525D687M003A(1)E025
204
10.0
4 Volt Rating at 105°C (2.7 Volt Rating at 125°C)
T525T686M004A(1)E080
27
8.0
T525B686M004A(1)E080
28
8.0
T525B107M004A(1)E080
40
8.0
T525D227M004A(1)E025
88
10.0
T525D337M004A(1)E025
132
10.0
T525D477M004A(1)E025
188
10.0
T525D477M004A(1)E040
188
10.0
6.3 Volt Rating at 105°C (4.2 Volt Rating at 125°C)
T525B336M006A(1)E080
21
8.0
T525T476M006A(1)E080
30
8.0
T525B476M006A(1)E080
30
8.0
T525B686M006A(1)E080
43
8.0
T525D157M006A(1)E025
95
10.0
T525D227M006A(1)E025
139
10.0
T525D337M006A(1)E025
208
10.0
T525D337M006A(1)E040
208
10.0
8 Volt Rating at 105°C (5.3 Volt Rating at 125°C)
T525T336M008A(1)E080
26
8.0
10 Volt Rating at 105°C (6.6 Volt Rating at 125°C)
T525B226M010A(1)E080
8.0
22
T525T336M010A(1)E080
33
8.0
T525B336M010A(1)E080
33
8.0
T525D107M010A(1)E025
100
10.0
T525D107M010A(1)E055
100
10.0
T525D157M010A(1)E025
150
10.0
T525D157M010A(1)E055
150
10.0
T525D227M010A(1)E025
220
10.0
16 Volt Rating at 105°C (10.6 Volt Rating at 125°C)
T525D476M016A(1)E035
76
10.0
T525D476M016A(1)E065
76
10.0
Ripple Current
(Arms)
100 kHz Max
w/'T= 20°C
@ -55°C to
105°C
w/'T= 2°C
@ 125°C
80
25
25
25
0.9
2.4
2.4
2.4
0.3
0.8
0.8
0.8
80
80
25
25
25
1.0
1.0
2.4
2.4
2.4
0.3
0.3
0.8
0.8
0.8
80
80
80
25
25
25
40
0.9
1.0
1.0
2.4
2.4
2.4
1.9
0.3
0.3
0.3
0.8
0.8
0.8
0.6
80
80
80
80
25
25
25
40
1.0
0.9
1.0
1.0
2.4
2.4
2.4
1.9
0.3
0.3
0.3
0.3
0.8
0.8
0.8
0.6
80
0.9
0.3
80
80
80
25
55
25
55
25
1.0
0.9
1.0
2.4
1.7
2.4
1.7
2.4
0.3
0.3
0.3
0.8
0.5
0.8
0.5
0.8
35
65
2.1
1.5
0.7
0.5
Conductive Polymer Surface Mount
Capacitance μF
DC
Leakage
μA @ 25°C
Max
(1) To complete KEMET Part Number, insert lead material designation for ordering information below. Higher voltage ratings and tighter tolerance
product may be substituted within the same size at KEMET’S option. Voltage substitutions will be marked with the higher voltage rating.
T525 ORDERING INFORMATION
T 525 D 337 M 006 A T E040
Tantalum
Series
T525 - High Temperature
Tantalum Polymer (KT)
Case Size
B, D, T
ESR
Expressed in milliohms
Lead Material
T - 100% Tin
H - Tin/Lead (SnPb
5% Pb minimum)
Failure Rate
Capacitance Picofarad Code
First two digits represent significant figures.
Third digit specifies number of zeros to follow.
A - Not Applicable
Voltage
Note: 006 - 6.3
Capacitance Tolerance
M = ± 20%
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
55
CONDUCTIVE POLYMER CHIP CAPACITORS
T530 SERIES - High Capacitance/Ultra-Low ESR
FEATURES
•
•
•
•
•
•
•
•
100% Accelerated Steady State Aging
100% Surge Current Testing
Utilizes Multiple Tantalum Anode Technology
Volumetric Efficiency
Use Up to 90% of Rated Voltage (10% Derating)
Self-Healing Mechanism
True SMT Capability
RoHS Compliant/Lead Free
Conductive Polymer Surface Mount
Highest CV in Standard EIA Size
Extremely Low ESR
Operating Temperature: -55˚C to 125˚C
Polymer Cathode Technology
High Frequency Capacitance Retention
Non-Ignition Failure Mode
Capacitance: 150 to 1500 ␮F
Voltage: 2.5V to 10V
Molded Case (pick-and-place precision)
•
•
•
•
•
•
•
•
•
OUTLINE DRAWINGS
CATHODE (-) END
VIEW
SIDE VIEW
ANODE (+) END
VIEW
B
W
BOTTOM VIEW
B
H
E
K
F
T
X
S
G
A
L
Termination Notch
at KEMET’s Option,
Either End
S
DIMENSIONS - MILLIMETERS (INCHES)
Case Size
KEMET EIA
D
7343-31
Y
7343-40
X
7343-43
L
7.3 ± 0.3
7.3 ± 0.3
7.3 ± 0.3
W
4.3 ± 0.3
4.3 ± 0.3
4.3 ± 0.3
H
2.8 ± 0.3
4.0 max
4.0 ± 0.3
K ±0.20
1.5
1.9
2.3
F ±0.1
2.4
2.4
2.4
S ±0.3
1.3
1.3
1.3
X(Ref)
0.10 ± 0.10
0.10 ± 0.10
0.10 ± 0.10
T(Ref)
0.13
0.13
0.13
A(Min)
3.8
3.8
3.8
G(ref)
3.5
3.5
3.5
E(ref)
3.5
3.5
3.5
T530 RATINGS & PART NUMBER REFERENCE
Capacitance
µF
Case
Size
KEMET Part Number
DCL
VR
DF %
120Hz
Ripple Current (Arms)
ESR
@ 100 kHz
m:@100
kHz 25°C w/'T= 20°C w/'T= 2°C
@
-55°C
to
Max
@ 125°C
Capacitance
µF
Case
Size
KEMET Part Number
DCL
VR
DF %
120Hz
105°C
470.0
470.0
470.0
560.0
680.0
680.0
680.0
680.0
680.0
1000.0
1000.0
1000.0
1000.0
1000.0
1500.0
D
D
D
D
Y
Y
D
D
X
Y
Y
X
X
X
X
470.0
680.0
1000.0
1500.0
D
D
X
X
330.0
330.0
470.0
470.0
470.0
470.0
680.0
680.0
680.0
680.0
680.0
1000.0
D
D
D
D
Y
Y
Y
X
X
X
X
X
2.5 Volt Rating at 105°C (1.7 Volt Rating at 125°C)
T530D477M2R5A(1)E005
118µA
8.0
5.0
T530D477M2R5A(1)E006
118µA
8.0
6.0
T530D477M2R5A(1)E010
118µA
10.0
10.0
T530D567M2R5A(1)E005
140µA
8.0
5.0
T530Y687M2R5A(1)E005
170µA
8.0
5.0
T530Y687M2R5A(1)E006
170µA
8.0
6.0
T530D687M2R5A(1)E006
170µA
8.0
6.0
T530D687M2R5A(1)E010
170µA
8.0
10.0
T530X687M2R5A(1)E006
170µA
8.0
6.0
T530Y108M2R5A(1)E005
250µA
8.0
5.0
T530Y108M2R5A(1)E006
250µA
8.0
6.0
T530X108M2R5A(1)E004
250µA
8.0
4.0
T530X108M2R5A(1)E005
250µA
8.0
5.0
T530X108M2R5A(1)E006
250µA
8.0
6.0
T530X158M2R5A(1)E005
375µA
8.0
5.0
3 Volt Rating at 105°C (2 Volt Rating at 125°C)
T530D477M003A(1)E010
141µA
8.0
10.0
T530D687M003A(1)E010
204µA
8.0
10.0
T530X108M003A(1)E010
300µA
8.0
10.0
T530X158M003A(1)E008
450µA
8.0
8.0
4 Volt Rating at 105°C (2.7 Volt Rating at 125°C)
T530D337M004A(1)E005
132µA
8.0
5.0
T530D337M004A(1)E006
132µA
8.0
6.0
T530D477M004A(1)E006
188µA
8.0
6.0
T530D477M004A(1)E010
188µA
8.0
10.0
T530Y477M004A(1)E005
188µA
8.0
5.0
T530Y477M004A(1)E006
188µA
8.0
6.0
T530Y687M004A(1)E005
272µA
8.0
5.0
T530X687M004A(1)E004
272µA
8.0
4.0
T530X687M004A(1)E005
272µA
8.0
5.0
T530X687M004A(1)E006
272µA
8.0
6.0
T530X687M004A(1)E010
272µA
8.0
10.0
T530X108M004A(1)E006
400µA
8.0
6.0
Ripple Current (Arms)
ESR
@ 100 kHz
m:@100
kHz 25°C w/'T= 20°C w/'T= 2°C
@ -55°C to
Max
@ 125°C
105°C
7.1
6.5
5.0
7.1
7.2
6.6
6.5
5.0
6.7
7.2
6.6
8.2
7.3
6.7
7.3
2.3
2.1
1.6
2.3
2.3
2.1
2.1
1.6
2.1
2.3
2.1
2.6
2.3
2.1
2.3
5.0
5.0
5.2
5.8
1.6
1.6
1.6
1.8
7.1
6.5
6.5
5.0
7.2
6.6
7.2
8.2
7.3
6.7
5.2
6.7
2.3
2.1
2.1
1.6
2.3
2.1
2.3
2.6
2.3
2.1
1.6
2.1
220.0
220.0
330.0
330.0
330.0
330.0
330.0
470.0
470.0
470.0
470.0
470.0
680.0
680.0
D
D
D
D
Y
Y
Y
Y
X
X
X
X
X
X
150.0
150.0
150.0
220.0
220.0
220.0
330.0
330.0
330.0
330.0
D
D
D
D
D
Y
X
X
X
X
150.0
150.0
150.0
X
X
X
6.3 Volt Rating at 105°C (4.2 Volt Rating at 125°C)
T530D227M006A(1)E005
139µA
8.0
5.0
T530D227M006A(1)E006
139µA
8.0
6.0
T530D337M006A(1)E006
208µA
8.0
6.0
T530D337M006A(1)E010
208µA
8.0
10.0
T530Y337M006A(1)E005
208µA
8.0
5.0
T530Y337M006A(1)E006
208µA
8.0
6.0
T530Y337M006A(1)E010
208µA
8.0
10.0
T530Y477M006A(1)E005
296µA
8.0
5.0
T530X477M006A(1)E004
296µA
8.0
4.0
T530X477M006A(1)E005
296µA
8.0
5.0
T530X477M006A(1)E006
296µA
8.0
6.0
T530X477M006A(1)E010
296µA
8.0
10.0
T530X687M006A(1)E010
428µA
8.0
10.0
T530X687M006A(1)E018
428µA
8.0
18.0
10 Volt Rating at 105°C (6.6 Volt Rating at 125°C)
T530D157M010A(1)E005
150µA
8.0
5.0
T530D157M010A(1)E006
150µA
8.0
6.0
T530D157M010A(1)E010
150µA
8.0
10.0
T530D227M010A(1)E006
220µA
8.0
6.0
T530D227M010A(1)E010
220µA
8.0
10.0
T530Y227M010A(1)E006
220µA
8.0
6.0
T530X337M010A(1)E004
330µA
8.0
4.0
T530X337M010A(1)E005
330µA
8.0
5.0
T530X337M010A(1)E006
330µA
8.0
6.0
T530X337M010A(1)E010
330µA
8.0
10.0
16 Volt Rating at 105°C (10.6 Volt Rating at 125°C)
T530X157M016A(1)E015
240µA
8.0
15.0
T530X157M016A(1)E025
240µA
8.0
25.0
T530X157M016A(1)E040
240µA
8.0
40.0
(1) To complete KEMET Part Number, insert lead material designation from ordering information on page 57. Higher voltage ratings and tighter tolerance product
may be substituted within the same size at KEMET's option. Voltage substitutions willl be marked with the higher voltage rating.
(1) To complete KEMET Part Number, insert lead material designation from ordering information on page 56. Higher voltage
ratings and tighter tolerance product may be substituted within the same size at KEMET’S option. Voltage substitutions will
be marked with the higher voltage rating.
56
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
7.1
6.5
6.5
5.0
7.2
6.6
5.1
7.2
8.2
7.3
6.7
5.2
5.2
3.8
2.3
2.1
2.1
1.6
2.3
2.1
1.6
2.3
2.6
2.3
2.1
1.6
1.6
1.2
7.1
6.5
5.0
6.5
5.0
6.6
8.2
7.3
6.7
5.2
2.3
2.1
1.6
2.1
1.6
2.1
2.6
2.3
2.1
1.6
4.2
3.3
2.6
1.3
1.0
0.8
CONDUCTIVE POLYMER CHIP CAPACITORS
T530 SERIES - High Capacitance/Ultra-Low ESR
T530 ORDERING INFORMATION
T 530 X 158 M 003 A S E008
ESR
Tantalum
Series
Expressed in Milliohms
Lead Material
T - 100% Tin
H - Tin/Lead (SnPb 5% Pb minimum)
* S - Not recommended for new design
* supply is not guaranteed with the ‘S’ termination code.
*Pb-free
This
Gtermination code not available effective 15 July 2007.
Case Size
D, X, Y
Failure Rate
Capacitance Picofarad Code
A - Not Applicable
Conductive Polymer Surface Mount
T530 - Multiple Anode
Polymer
Voltage
*Refer to www.kemet.com for
Pb Free transition information
COMPONENT MARKING
(KM) KEMET
High Capacitance/
Ultra-Low ESR
Rated
Voltage
KM
158
3K
505
Note: 006 = 6.3
Capacitance Tolerance
M - ± 20%
T530 SERIES CONSTRUCTION
Polarity
Indicator
Picofarad Code
KEMET ID
PWC*
“505” = The 5th week
of 2005.
T530X/T510E/T491E 1,000μF
Capacitance vs. Frequency
T530X/T510E/T491E 1,000μF
Impedance & ESR vs. Frequency
RECOMMENDED
TEMPERATURE/VOLTAGE DERATING
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
57
ALUMINUM ORGANIC CAPACITORS
Performance Characteristics
4. Voltage Ratings
• 2 - 10 VDC Rated Voltage
This is the maximum peak DC operating voltage
from -55°C to +125°C for continuous duty.
Surge Voltage Ratings
Surge voltage capability is demonstrated by application of 1000 cycles of the relevant voltage at 25°C,
85°C, or 125 °C. The parts are charged through a 33
ohm resistor for 30 seconds and then discharged
through a 33 ohm resistor for 30 seconds for each
cycle.
The AO-CAP offers many advantages including extremely low ESR, high capacitance retention at high operating
frequencies, no dry-out related failure mechanism and
no voltage de-rating up to125°C.
Voltage Ratings • Table 1
Rated
Surge
Voltage
Voltage
-55°C to 125 °C
2V
2.6V
2.5V
3.2V
4V
5.2V
6.3V
8V
8V
10.4V
10V
13V
ELECTRICAL
1. Operating Temperature Range
• -55°C to +125°C
No derating with temperature is required.
2. Non-Operating Temperature Range
• -55°C to 125°C
3. Capacitance and Tolerance
• 22µF to 470µF
• ±20% Tolerance
Capacitance is measured at 120 Hz, up to 1.0 volt
rms maximum and up to 2.5V DC maximum. DC
bias causes only a small reduction in capacitance,
up to about 2% when full rated voltage is applied.
DC bias is not commonly used for room temperature
measurements but is more commonly used when
measuring at temperature extremes.
Capacitance does decrease with increasing frequency, but not nearly as much or as quickly as
standard tantalums. Figure 1 compares the frequency induced cap roll-off between the AO-CAP and traditional MnO2 types. Capacitance also increases
with increasing temperature. See Section 12 for temperature coefficients.
5. Reverse Voltage Rating & Polarity
Aluminum polymer capacitors are polar devices and
may be permanently damaged or destroyed if connected in the wrong polarity. The positive terminal is
identified by a laser-marked stripe. These capacitors
will withstand a certain degree of transient voltage
reversal for short periods as shown in the following
table. Please note that these parts may not be operated continuously in reverse, even within these limits.
Table 2
Temperature
25°C
55°C
85°C
125°C
Permissible Transient Reverse Voltage
60% of Rated Voltage
50% of Rated Voltage
40% of Rated Voltage
30% of Rated Voltage
6. DC Leakage Current
Because of the high conductivity of the polymer, the
AO-CAP family has higher leakage currents than traditional MnO2 type Tantalum caps. The DC Leakage
limits at 25°C are calculated as 0.06 x C x V, (where
C is cap in µF and V is rated voltage in Volts) for
part types with rated voltage ≤ 4V, and equals 0.04 x
C x V, for voltages > 4V. Limits for all part numbers
are listed in the ratings tables.
Figure 1.
58
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Aluminum Organic Capacitors
Introduction
KEMET entered the world of aluminum capacitors with
the introduction of the AO-CAP, designated the A700
Series, which has been targeted for power management
applications. The structure of the AO-CAP uses aluminum as the anode material, aluminum oxide as the
dielectric, and a conductive organic polymer for its
counter-electrode material. The A700 series is 100%
screened for all electrical parameters: Capacitance @
120Hz, Dissipation Factor (DF) @ 120 Hz, ESR @ 100
kHz, and DC Leakage.
ALUMINUM ORGANIC CAPACITORS
Performance Characteristics
DC Leakage Current does increase with temperature. The limits for 85°C @ Rated Voltage and
125°C are both 2 times the 25°C limit.
7. Dissipation Factor (DF)
Refer to part number tables for maximum DF limits.
Dissipation factor is measured at 120 Hz, up to 1.0
volt rms maximum. Dissipation factor is the ratio of
the equivalent series resistance (ESR) to the capacitive reactance, (Xc) and is usually expressed as a
percentage. It is directly proportional to both capacitance and frequency. Dissipation factor loses its
importance at higher frequencies, (above about 1
kHz), where impedance (Z) and equivalent series
resistance (ESR) are the normal parameters of concern.
R
DF = X = 2πfCR
c
Where:
DF = Dissipation Factor
R = Equivalent Series Resistance (Ohms)
Xc = Capacitive Reactance(Ohms)
f
= Frequency (Hertz)
C = Capacitance (Farads)
DF is also referred to as tan δ or "loss tangent."
The "Quality Factor," "Q", is the reciprocal of DF.
8. Equivalent Series Resistance (ESR) and
Impedance (Z)
The Equivalent Series Resistance (ESR) of the AOCAP is much lower than standard Tantalum caps
because the polymer cathode has much higher conductivity. ESR is not a pure resistance, and it
decreases with increasing frequency.
Total impedance of the capacitor is the vector sum of
capacitive reactance (Xc) and ESR below reso
nance; above resonance total impedance is the vector sum of inductive reactance (XL) and ESR.
ESR
Xc =
1
2πfC
θ
(Ohms)
δ
Where:
f = frequency (Hertz)
C = capacitance (Farad)
Xc
Figure 2a Total Impedance of the Capacitor
Below Resonance
XL = 2πfL (Ohms)
Z
Where:
f = frequency (Hertz)
L = inductance (Henries)
XL
Aluminum Organic Capacitors
DC Leakage Current is the current that flows
through the capacitor dielectric after a five minute
charging period at rated voltage. Leakage is measured at 25°C with full rated voltage applied to the
capacitor through a 1000 ohm resistor in series with
the capacitor.
δ
θ
ESR
Figure 2b Total Impedance of the Capacitor
Above Resonance
To understand the many elements of a capacitor,
see Figure 3.
C
ESL
ESR
RL
Cd
Rd
Figure 3 The Real Capacitor
A capacitor has a complex impedance consisting of
many series and parallel elements, each adding to
the complexity of the measurement system.
ESL - Represents inductance. In most instances it is
significant at the basic measurement frequencies of
120 and 1000 Hz.
ESR - Represents the ohmic resistance in series
with the capacitance. Lead attachment and capacitor
electrodes are contributing sources.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
59
ALUMINUM ORGANIC CAPACITORS
Performance Characteristics
As frequency increases, Xc continues to decrease
according to its equation. There is unavoidable
inductance as well as resistance in all capacitors,
and at some point in frequency, the reactance ceases to be capacitive and becomes inductive. This frequency is call the self-resonant point.
Figure 4 compares the frequency response of an
AO-CAP to a Tantalum chip. Maximum limits for 100
kHz ESR are listed in the part number tables for
each series.
10. Ripple Current/Voltage
Permissible AC ripple voltage and current are related
to equivalent series resistance (ESR) and power dissipation capability.
Permissible ripple current which may be applied
is limited by two criteria:
a. The resulting voltage across the capacitor with the
summation of DC bias and peak voltage of the
AC portion must not exceed the rated voltage of
the capacitor.
b. The negative peak AC voltage, in combination
with bias voltage, if any, must not exceed the permissible reverse voltage ratings presented in
Section 5.
Actual power dissipated may be calculated from the
following:
P = I 2R
Substituting I = E ; P = E2R
Z
Z2
Where:
I = rms ripple current (Amperes)
E = rms ripple voltage (Volts)
P = power (Watts)
Z = impedance at specified frequency (ohms)
R = ESR(Ohms)
Using P max from Table 3, maximum allowable rms
ripple current or voltage may be determined as follows:
Imax =
Figure 4.
9. AC Power Dissipation
Power dissipation is a function of capacitor size and
materials. Maximum power ratings have been established for all case sizes to prevent overheating. In
actual use, the capacitor's ability to dissipate the
heat generated at any given power level may be
affected by a variety of circuit factors. These include
board density, pad size, heat sinks and air circulation.
Power capability is determined based on a 20°C temperature rise. A higher temperature rise and therefore
higher power capability is allowable as long as the
ambient temperature plus temperature rise due to ripple current does not exceed the rated temperature of
the part.
Case Code
KEMET
EIA
Maximum Power Dissipation mWatts
@ +25°C with 20° Temperature Rise
V
7343-20
270
D
7343-31
250
X
7343-43
225
Pmax
ESR
Emax = Z
R
Where:
Imax = Maximum rupple current (ARMS)
Pmax = Maximum Power @ allowable ∆T normally
+20°C
Emax = Maximum ripple voltage (VRMS)
Refer to part number listings for permittable Arms
limits.
Table 3 - AO Capacitor Power Dissipation Ratings
60
Pmax
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Aluminum Organic Capacitors
RL - Capacitor Leakage Resistance. Typically it can
be 35 K to 2.5 MOhms depending on voltage capacitance. It can exceed 1012 ohms in monolithic
ceramics and in film capacitors.
Rd - The dielectric loss contributed by dielectric
absorption and molecular polarization. It becomes
very significant in high frequency measurements and
applications. Its value varies with frequency.
Cd - The inherent dielectric absorption of the solid
aluminum capacitor.
ALUMINUM ORGANIC CAPACITORS
Performance Characteristics
11. Temperature Stability
Mounted capacitors withstand extreme temperature
testing at a succession or continuous steps at
+25°C, -55°C, +25°C, +85°C, +125°C, +25°C in that
order. Capacitors are allowed to stabilize at each
temperature before measurement. Cap, DF, and
DCL are measured at each temperature; except DC
Leakage is not measured at -55°C.
Step
Temp
∆Cap
DCL
DF
1
25°C
Specified
Tolerance
Catalog
Limit
Catalog
Limit
2
-55°C
15% of
initial value
N/A
Catalog
Limit
3
+25°C
5% of
initial value
Catalog
Limit
Catalog
Limit
4
+85°C
15% of
initial value
2X Catalog
Limit
Catalog
Limit
5
+125°C
20% of
initial value
2X Catalog
Limit
Catalog
Limit
6
+25°C
5% of
initial value
Catalog
Limit
Catalog
Limit
Table 4 - Acceptable limits are as follows:
12. Standard Life Test
• 85°C, Rated Voltage, 2000 Hours
Post Test Performance:
a. Capacitance: within ±10% of initial value
b. DF: within initial limit
c. DC Leakage: within initial limit
d. ESR: within initial limit
13. High Temperature Life Test
• 125°C, Rated Voltage, 2000 Hours
Post Test Performance:
a. Capacitance: within ±10% of initial value
b. DF: within initial limit
c. DC Leakage: within 1.25 x initial limit
d. ESR: within 2 x initial limit
14. Storage Life Test
• 125°C, O VDC, 2000 Hours
Post Test Performance:
a. Capacitance: within ±10% of initial value
b. DF: within initial limit
c. DC Leakage: within 1.25 x initial limit
d. ESR: within 2 x initial limit
15. Thermal Shock
• Mil-Std-202, Method 107, Condition B
Minimum temperature is -55°C
Maximum temperature is +125°C
Post Test Performance:
a. Capacitance: within ±10% of initial value
b. DF: within initial limit
c. DC Leakage: within initial limit
d. ESR: within 2 x initial limit
16. Moisture Sensitivity Level (MSL)
• J-Std-020
a. Capacitance: within ±30% of initial value
b. DF: within initial limit
c. DC Leakage: within initial limit
d. ESR: within 2 x initial limit
Meets MSL 3 requirements for SnPb assembly.
17. Load Humidity
• 85°C, 85% RH, Rated Voltage, 500 Hours
a. Capacitance: within +30/-5% of initial value
b. DF: within initial limit
c. DC Leakage: within 5 x initial limit
d. ESR: within 2 x initial limit
18. ESD
• Polymer Aluminum capacitors are not sensitive to Electro-Static Discharge (ESD).
19. Failure Mechanism and Reliability
The normal failure mechanism is dielectric break
down. Dielectric failure can result in high DC
Leakage current and may proceed to the level of a
short circuit. With sufficient time to charge, healing
may occur by one of two potential mechanisms. The
polymer adjacent to the dielectric fault site may overheat and vaporize, disconnecting the fault site from
the circuit. The polymer may also oxidize into a more
resistive material that caps the defect site in the
dielectric and reduces the flow of current.
Aluminum Organic Capacitors
ENVIRONMENTAL
Capacitor failure may be induced by exceeding the
rated conditions of forward DC voltage, reverse DC
voltage, surge current, power dissipation or temperature. Excessive environmental stress, such as prolonged or high temperature reflow processes may
also trigger dielectric failure.
20. Resistance to Solvents
• Mil-Std 202, Method 215
Post Test Performance:
a. Capacitance: within ±10% of initial value
b. DF: within initial limit
c. DC Leakage: within initial limit
d. ESR: within initial limit
e. Physical: no degradation of case, terminals or
marking
21. Fungus
• Mil-Std-810, Method 508
22. Flammability
• UL94 VO Classification
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
61
ALUMINUM ORGANIC CAPACITORS
Performance Characteristics
24. Solderability
• Mil-Std-202, Method 208
• ANSI/J-Std-002, Test B
25. Vibration
• Mil-Std-202, Method 204, Condition D, 10 Hz to
2,000 Hz, 20G Peak
Post Test Performance:
a. Capacitance: within ±10% of initial value
b. DF: within initial limit
c. DC Leakage: within initial limit
d. ESR: within initial limit
26. Shock
• Mil-Std-202, Method 213, Condition I, 100 G
Peak
Post Test Performance:
a. Capacitance: within ±10% of initial value
b. DF: within initial limit
c. DC Leakage: within initial limit
d. ESR: within initial limit
27. Terminal Strength
• Pull Force
• One Pound (454 grams), 30 Seconds
• Tensile Force
• Four Pounds (1.8 kilograms), 60 Seconds
Post Test Performance:
a. Capacitance: within ±5% of initial value
b. DF: within initial limit
c. DC Leakage: within initial limit
d. ESR within initial limit
28. Handling
Automatic handling of encapsulated components is
enhanced by the molded case which provides compatibility with all types of high speed pick and place
equipment. Manual handling of these devices presents no unique problems. Care should be taken with
your fingers, however, to avoid touching the soldercoated terminations as body oils, acids and salts will
degrade the solderability of these terminations.
Finger cots should be used whenever manually handling all solderable surfaces.
29. Termination Coating
The standard finish coating is 100% Sn solder
(Tin-solder coated) with nickel (Ni) underplating.
30. Recommended Mounting Pad Geometries
Proper mounting pad geometries are essential for
successful solder connections. These dimensions
are highly process sensitive and should be designed
to maximize the integrity of the solder joint, and to
minimize component rework due to unacceptable
solder joints.
Figure 5 illustrates pad geometry. The table provides
recommended pad dimensions for reflow soldering
techniques. These dimensions are intended to be a
starting point for circuit board designers, to be fine
tuned, if necessary, based upon the peculiarities of
the soldering process and/or circuit board design.
Contact KEMET for Engineering Bulletin Number
F-2100 entitled "Surface Mount Mounting Pad
Dimensions and Considerations" for further details
on this subject or visit our website at
www.kemet.com.
•
Shear Force
Table 5 Maximum Shear Loads
Case Code
KEMET
EIA
V
7343-20
D
7343-31
X
7343-43
Maximum Shear Loads
Kilograms
Pounds
5.0
11.0
5.0
11.0
5.0
11.0
C
Figure 5
Grid
Placement
Courtyard
X
G
Y
Z
62
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Aluminum Organic Capacitors
23. Resistance to Soldering Heat
• Maximum Reflow
+245 ±5°C, 10 seconds
• Typical Reflow
+230 ±5°C, 30 seconds
Post Test Performance:
a. Capacitance: within ±10% of initial value
b. DF: within initial limit
c. DC Leakage: within initial limit
d. ESR: within initial limit
ALUMINUM ORGANIC CAPACITORS
Performance Characteristics
D/7343-31, V/7343-20
X/7343-43
Pad Dimensions
Z
G
X
Y (Ref)
C (Ref)
8.90
3.80
2.70
2.55
6.35
Table 6 - Land Pattern Dimensions for Reflow
Solder
31. Soldering
The A700 - AO-CAP family has been designed for
reflow solder processes, or for wave soldering. The
solder-coated terminations have excellent wetting
characteristics for high integrity solder fillets.
Preheating of these components is recommended to
avoid extreme thermal stress. Figure 6 represents
the recommended maximum solder temperature/
time combinations for these devices.
Hand-soldering should be avoided. However, if necessary it should be performed with care due to the
difficulty in process control. Care should be taken to
avoid contact of the soldering iron to the molded
case. The iron should be used to heat the solder
pad, applying solder between the pad and the termination, until reflow occurs. The iron should be
removed. "Wiping" the edges of a chip and heating
the top surface is not recommended.
AO capacitors should be stored in normal working
environments. While the chips themselves are quite
robust in other environments, solderability will be
degraded by exposure to high temperatures, high
humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature (reels may soften or warp,
and tape peel force may increase). KEMET recommends that maximum storage temperature not
exceed 40 degrees C, and the maximum storage
humidity not to exceed 60% relative humidity. In
addition, temperature fluctuations should be minimized to avoid condensation on the parts, and
atmospheres should be free of chlorine and sulfur
bearing compounds. For optimized solderability, chip
stock should be used promptly, preferably within 1.5
years of receipt.
Sn-Pb
Sn-Pb Profile
300
Temperature (°C)
34. Storage Environment
AO capacitors are shipped in moisture barrier bags
with a desiccant and mositure indicator card. This
series is classified as MSL3 (Moisture Sensitivity
Level 3). Upon opening the moisture barrier bag,
parts should be mounted within 7 days to prevent
mositure absorption and outgassing. If the 7 day
window is exceeded, the parts can be dryed per the
instructions on the bag (168 hours at 40 ± 5°C).
Aluminum Organic Capacitors
KEMET/EIA Size
Code
Tape & Reel Packaging
5 Sec.
250
Case Codes
200
150
45 Sec.
45 Sec.
KEMET
100
90 Sec.
EIA
50
Tape & Reel Dimensions
Tape
Width
mm
Pitch
mm ± 0.1
Part
95 Sec.
0
0
50
60 Sec.
100
150
200
250
300
Time (Seconds)
Figure 6 Sn-Pb Profile measured on the surface
of the component
* Contact KEMET for the latest A700 Pb-free soldering recommendations.
32. Washing
Standard washing techniques and solvents are compatible with all KEMET surface mount aluminum
capacitors. Solvents such as Freon TMC and TMS,
Trichlorethane, methylene chloride, prelate, and isopropyl alcohol are not harmful to these components.
Please note that we are not endorsing the use of
banned or restricted solvents. We are simply stating
that they would not be harmful to the components.
If ultrasonic agitation is utilized in the cleaning
process, care should be taken to minimize energy
levels and exposure times to avoid damage to the
terminations.
KEMET AO-CAPS are also compatible with newer
aqueous and semi-aqueous processes.
33. Encapsulations
Under normal circumstances, potting or encapsulation of KEMET aluminum chips is not required.
Reel Quantity
Spro- 180mm 330mm
cket (7” dia.) (13” dia.)
V
7343-20 12 ± 0.3
8
4
1000
3000
D
7343-31 12 ± 0.3
8
4
500
2500
X
7343-43 12 ± 0.3
8
4
500
2000
Component Marking
Rated
Voltage
476
6K
424
Polarity (+)
Indicator
Picofarad
Code
KEMET ID
1st Digit = year
2nd & 3rd digits =
Week
Aluminum Component Weights
Series
Case Size
Typical Weight
(mg)
A700
A700
A700
V/7343-20
D/7343-31
X/7343-43
120
190
260
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
63
ALUMINUM ORGANIC CAPACITORS
A700 Series
APPLICATIONS
• Input/Output Filters for voltage regulators, converters, and SMPS
• Battery Decoupling (portable, handheld electronics)
• Power Decoupling (Procesor, Transmitter circuits)
• Bulk Capacitor Requirements
FEATURES
•
•
•
•
•
•
•
•
•
Polymer Cathode Technology
Extremely Low ESR
High Frequency Capacitance Retention
Non-ignition Failure Mode
Capacitance: 22 to 470 µF
Self-healing Mechanism
-55° to +125°C Capability
No temperature voltage Derating Up To 125°C
Robust to Surface Mount Process
•
•
•
•
•
•
•
•
100% Accelerated Steady State Aging
Pb Free and RoHS Compliant
Solid-state Technology
Molded Case with Wraparound Termination
Voltage: 2 to 10V
No Reformation Required
EIA Standard Case Size
No Dry-out Related Failure Mechanism
OUTLINE DRAWING
Side View
End View
Bottom View
Aluminum Organic Capacitors
W
F
H
K
S
L
S
DIMENSIONS - MILLIMETERS
Case
KEMET
V
D
X
Size
EIA
7343-20
7343-31
7343-43
L
7.3 ± 0.3
7.3 ± 0.3
7.3 ± 0.3
W
4.3 ± 0.3
4.3 ± 0.3
4.3 ± 0.3
H
1.9 ± 0.1
2.8 ± 0.3
4.0 ± 0.3
K Min.
0.9
1.3
2.1
F ±0.1
2.4
2.4
2.4
S ±0.2
1.3
1.3
1.3
T
E018
Note that glue pad shape may differ at KEMET’s discretion.
A700 ORDERING INFORMATION
A
700
V
476
M
006
A
Aluminum
Series
700 Chip
Case Size
V,D,X
Capacitance Picofarad Code
First two digits represent
significant figures. Third digit
specifies number of zeros.
64
ESR
Lead Material
T = 100% Tin (Sn) Plated
Failure Rate Level
A = Not Applicable
Voltage
As Shown
Capacitance Tolerance
M = ±20%
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
ALUMINUM ORGANIC CAPACITORS
A700 Series
A700 RATINGS & PART NUMBER REFERENCE
Cap
µF
DCL
@VR
DF @
120 Hz
ESR
100 kHz
(mΩ)
Ripple Current
(Arms) @ 100kHz
w/ΔT=+20°C @
-55°C to 125°C
KEMET Part Number
Case Size
A700V107M002ATE018
A700V107M002ATE025
A700V107M002ATE028
A700V127M002ATE018
A700V127M002ATE025
A700V127M002ATE028
A700V157M002ATE009
A700V157M002ATE018
A700V157M002ATE025
A700V157M002ATE028
A700D187M002ATE015
A700D187M002ATE018
A700V227M002ATE009
A700D227M002ATE015
A700D227M002ATE018
A700X277M002ATE010
A700X277M002ATE012
A700X277M002ATE015
A700D337M002ATE007
A700X337M002ATE010
A700X337M002ATE015
A700X397M002ATE010
A700X397M002ATE015
A700X477M002ATE010
A700X477M002ATE015
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
V/7343-20
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
100.0
12.0 µA
100.0
12.0 µA
100.0
12.0 µA
120.0
14.4 µA
120.0
14.4 µA
120.0
14.4 µA
150.0
18.0 µA
150.0
18.0 µA
150.0
18.0 µA
150.0
18.0 µA
180.0
21.6 µA
180.0
21.6 µA
220.0
26.4µA
220.0
26.4 µA
220.0
26.4 µA
270.0
32.4 µA
270.0
32.4µA
270.0
32.4 µA
330.0
39.6µA
330.0
39.6 µA
330.0
39.6 µA
390.0
46.8 µA
390.0
46.8 µA
470.0
56.4 µA
470.0
56.4 µA
2.5 Volt Rating @ 125°C
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
18
25
28
18
25
28
9
18
25
28
15
18
9
15
18
10
12
15
7
10
15
10
15
10
15
3.9
3.3
3.1
3.9
3.3
3.1
5.4
3.9
3.3
3.1
4.1
3.7
5.5
4.1
3.7
4.7
4.3
3.9
6.0
4.7
3.9
4.7
3.9
4.7
3.9
A700V826M2R5ATE018
A700V826M2R5ATE025
A700V826M2R5ATE028
A700D157M2R5ATE015
A700D157M2R5ATE018
A700D187M2R5ATE015
A700D187M2R5ATE018
A700X227M2R5ATE010
A700X227M2R5ATE015
A700X337M2R5ATE010
A700X337M2R5ATE015
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
82.0
12.3 µA
82.0
12.3 µA
82.0
12.3 µA
150.0
22.5 µA
150.0
22.5 µA
180.0
27.0 µA
180.0
27.0 µA
220.0
33.0 µA
220.0
33.0 µA
330.0
49.5 µA
330.0
49.5 µA
4 Volt Rating @ 125°C
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
18
25
28
15
18
15
18
10
15
10
15
3.9
3.3
3.1
4.1
3.7
4.1
3.7
4.7
3.9
4.7
3.9
A700V826M004ATE018
A700V826M004ATE025
A700V826M004ATE028
A700D127M004ATE015
A700D127M004ATE018
A700D157M004ATE015
A700D157M004ATE018
A700D187M004ATE015
A700D187M004ATE018
A700X187M004ATE010
A700X187M004ATE015
A700D227M004ATE009
A700X227M004ATE009
A700X227M004ATE010
A700X227M004ATE015
A700X277M004ATE010
A700X277M004ATE015
A700X337M004ATE010
A700X337M004ATE015
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
18
25
28
15
18
15
18
15
18
10
15
9
9
10
15
10
15
10
15
3.9
3.3
3.1
4.1
3.7
4.1
3.7
4.1
3.7
4.7
3.9
5.3
5.3
4.7
3.9
4.7
3.9
4.7
3.9
82.0
82.0
82.0
120.0
120.0
150.0
150.0
180.0
180.0
180.0
180.0
220.0
220.0
220.0
220.0
270.0
270.0
330.0
330.0
19.7 µA
19.7 µA
19.7 µA
28.8 µA
28.8 µA
36.0 µA
36.0 µA
43.2 µA
43.2 µA
43.2 µA
43.2µA
52.8 µA
52.8 µA
52.8 µA
52.8 µA
64.8 µA
64.8 µA
79.2 µA
79.2 µA
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Aluminum Organic Capacitors
2 Volt Rating @ 125°C
65
ALUMINUM ORGANIC CAPACITORS
A700 Series
A700 RATINGS & PART NUMBER REFERENCE
DF @
120 Hz
ESR
100 kHz
(m:)
Ripple Current
(Arms) @ 100kHz
w/'T=+20°C @
-55°C to 125°C
22.0
5.5 µA
22.0
5.5 µA
33.0
8.3 µA
33.0
8.3 µA
33.0
8.3 µA
47.0
11.8 µA
47.0
11.8 µA
47.0
11.8 µA
56.0
14.1 µA
56.0
14.1 µA
56.0
14.1 µA
68.0
17.1 µA
68.0
17.1 µA
68.0
17.1 µA
82.0
20.7 µA
82.0
20.7 µA
82.0
20.7 µA
100.0
25.2 µA
100.0
25.2 µA
120.0
30.2 µA
120.0
30.2 µA
120.0
30.2 µA
150.0
37.8 µA
150.0
37.8µA
150.0
37.8 µA
180.0
45.4 µA
180.0
45.4 µA
220.0
55.4 µA
8 Volt Rating @ 125°C
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
28
45
18
25
28
18
25
28
18
25
28
18
25
28
18
25
28
15
18
12
15
18
10
12
15
10
15
15
3.1
2.4
3.9
3.3
3.1
3.9
3.3
3.1
3.9
3.3
3.1
3.9
3.3
3.1
3.9
3.3
3.1
4.1
3.7
4.6
4.1
3.7
4.7
4.3
3.9
4.7
3.9
3.9
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
22.0
7.0 µA
22.0
7.0 µA
33.0
10.6 µA
33.0
10.6 µA
33.0
10.6 µA
56.0
17.9 µA
56.0
17.9 µA
68.0
21.8 µA
68.0
21.8 µA
100.0
32.0 µA
100.0
32.0 µA
100.0
32.0 µA
10 Volt Rating @ 125°C
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
28
45
18
25
28
15
18
15
18
10
12
15
3.1
2.4
3.9
3.3
3.1
4.1
3.7
4.1
3.7
4.7
4.3
3.9
A700V226M010ATE028
A700V336M010ATE018
A700V336M010ATE025
A700V336M010ATE028
A700D566M010ATE015
A700D566M010ATE018
A700D686M010ATE015
A700D686M010ATE018
A700X107M010ATE010
A700X107M010ATE015
A700X127M010ATE010
A700X127M010ATE015
A700X157M010ATE010
A700X157M010ATE015
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
22.0
8.8 µA
33.0
13.2 µA
33.0
13.2 µA
33.0
13.2µA
56.0
22.4 µA
56.0
22.4 µA
68.0
27.2 µA
68.0
27.2 µA
100.0
40.0 µA
100.0
40.0 µA
120.0
48.0 µA
120.0
48.0 µA
150.0
60.0 µA
150.0
60.0 µA
12.5 Volt Rating @ 125°C
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
6%
28
18
25
28
15
18
15
18
10
15
10
15
10
15
3.1
3.9
3.3
3.1
4.1
3.7
4.1
3.7
4.7
3.9
4.7
3.9
4.7
3.9
A700V106M12RATE060
A700V156M12RATE040
A700V226M12RATE030
V/7343-20
V/7343-20
V/7343-20
10.0
5.0 µA
15.0
7.5 µA
22.0
11.0 µA
16 Volt Rating @ 125°C
6%
6%
6%
60
40
30
2.1
2.6
3.0
A700V685M016ATE070
A700V825M016ATE070
V/7343-20
V/7343-20
6%
6%
70
70
1.9
2.4
KEMET Part Number
Case Size
A700V226M006ATE028
A700V226M006ATE045
A700V336M006ATE018
A700V336M006ATE025
A700V336M006ATE028
A700V476M006ATE018
A700V476M006ATE025
A700V476M006ATE028
A700V566M006ATE018
A700V566M006ATE025
A700V566M006ATE028
A700V686M006ATE018
A700V686M006ATE025
A700V686M006ATE028
A700V826M006ATE018
A700V826M006ATE025
A700V826M006ATE028
A700D107M006ATE015
A700D107M006ATE018
A700D127M006ATE012
A700D127M006ATE015
A700D127M006ATE018
A700X157M006ATE010
A700X157M006ATE012
A700X157M006ATE015
A700X187M006ATE010
A700X187M006ATE015
A700X227M006ATE015
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
V/7343-20
D/7343-31
D/7343-31
D/7343-31
D/7343-31
D/7343-31
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
X/7343-43
A700V226M008ATE028
A700V226M008ATE045
A700V336M008ATE018
A700V336M008ATE025
A700V336M008ATE028
A700D566M008ATE015
A700D566M008ATE018
A700D686M008ATE015
A700D686M008ATE018
A700X107M008ATE010
A700X107M008ATE012
A700X107M008ATE015
Cap
µF
DCL
@VR
66
6.8
8.2
4.3 µA
5.2 µA
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Aluminum Organic Capacitors
6.3 Volt Rating @ 125°C
CERAMIC CHIP CAPACITORS
INTRODUCTION
Significant Figure
of Temperature
Coefficient
Working Voltage:
Refers to the maximum continuous DC working
voltage permissible across the entire operating
temperature range. The reliability of multilayer
ceramic capacitors is not extremely sensitive to
voltage, and brief applications of voltage above
rated will not result in immediate failure. However,
reliability will be degraded by sustained exposure
to voltages above rated.
2.
Temperature Characteristics:
Within the EIA classifications, various temperature characteristics are identified by a three-symbol
code; for example: C0G, X7R, X5R, Z5U and Y5V.
For Class I temperature compensating
dielectrics (includes C0G), the first symbol designates the significant figures of the temperature
coefficient in PPM per degree Celsius, the second
designates the multiplier to be applied, and the
third designates the tolerance in PPM per
degrees Celsius. EIA temperature characteristic
codes for Class I dielectrics are shown in Table 1.
Tolerance of
Temperature
Coefficient
PPM per
Degree C
Letter
Symbol
Multiplier
Number
Symbol
0.0
0.3
0.9
1.0
1.5
C
B
A
M
P
-1
-10
-100
-1000
-10000
0
1
2
3
4
PPM per
Degree C
Letter
Symbol
± 30
± 60
± 120
± 250
± 500
G
H
J
K
L
KEMET supplies the C0G characteristic.
For Class II and III dielectrics (including X7R,
X5R, Z5U & Y5V), the first symbol indicates the
lower limit of the operating temperature range, the
second indicates the upper limit of the operating
temperature range, and the third indicates the
maximum capacitance change allowed over the
operating temperature range. EIA type designation codes for Class II and III dielectrics are
shown in Table 2.
Table 2 – EIA Temperature Characteristic Codes for
Class II & III Dielectrics
Low Temperature
Rating
High Temperature
Rating
Degree
Celsius
Letter
Symbol
Degree
Celsius
Number
Symbol
+10C
-30C
-55C
Z
Y
X
+45C
+65C
+85C
+105C
+125C
+150C
+200C
2
4
5
6
7
8
9
Maximum Capacitance
Shift
Percent
Letter
Symbol
EIA
Class
A
B
C
D
E
F
P
R
S
T
U
V
II
II
II
II
II
II
II
II
III
III
III
III
± 1.0%
± 1.5%
± 2.2%
± 3.3%
± 4.7%
± 7.5%
± 10.0%
± 15.0%
± 22.0%
+ 22/-33%
+22/-56%
+22/-82%
KEMET supplies the X7R, X5R, Z5U and Y5V characteristics.
3.
Capacitance Tolerance:
See tables on pages 73-76.
4.
Capacitance:
Within specified tolerance when measured per
Table 3.
The standard unit of capacitance is the farad.
For practical capacitors, capacitance is usually
expressed in microfarads (10 -6 farad), nanofarads
(10 -9 farad), or picofarads (10 -12 farad). Standard
measurement conditions are listed in Table 3 Specified Electrical Limits.
Like all other practical capacitors, multilayer
ceramic capacitors also have resistance and
inductance. A simplified schematic for the single
frequency equivalent circuit is shown in Figure 1.
At high frequency more complex models apply see KEMET SPICE models at www.kemet.com for
details.
ELECTRICAL CHARACTERISTICS
1.
Multiplier Applied
to Temperature
Coefficient
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
67
Ceramic Surface Mount
Ceramic chips consist of formulated ceramic
dielectric materials which have been fabricated into thin
layers, interspersed with metal electrodes alternately
exposed on opposite edges of the laminated structure.
The entire structure is then fired at high temperature to
produce a monolithic block which provides high capacitance values in a small physical volume. After firing, conductive terminations are applied to opposite ends of the
chip to make contact with the exposed electrodes.
Standard end terminations use a nickel barrier layer and
a tin overplate to provide excellent solderability for the
customer.
KEMET multilayer ceramic chip capacitors are
produced in plants designed specifically for chip capacitor manufacture. The process features a high degree
of mechanization as well as precise controls over raw
materials and process conditions. Manufacturing is
supplemented by extensive Technology, Engineering
and Quality Assurance programs.
KEMET ceramic chip capacitors are offered in the
five most popular temperature characteristics. These
are designated by the Electronics Industies Association
(EIA) as the ultra-stable C0G (also known as NP0,
military version BP), the stable X7R (military BX or
BR), the stable X5R, and the general purpose Z5U and
Y5V. A wide range of sizes are available. KEMET multilayer ceramic chip capacitors are available in KEMET's
tape and reel packaging, compatible with automatic
placement equipment. Bulk cassette packaging is also
available (0805,0603 and 0402 only) for those pick and
place machines requiring its use.
Table 1 – EIA Temperature Characteristic
Codes for Class I Dielectrics
CERAMIC CHIP CAPACITORS
Figure 1
ESL
6.
IR
Impedance:
Since the parallel resistance (IR) is normally very
high, the total impedance of the capacitor can be
approximated by:
ESR
Figure 3
C
C = Capacitance
ESR = Equivalent Series Resistance
ESL = Equivalent Series Inductance
IR = Insulation Resistance
2
2
ESR + (X - X )
L C
Z=
Where : Z = Total Impedance
5.
Dissipation Factor:
Measured under same conditions as
capacitance. (See Table 3)
Dissipation factor (DF) is a measure of the losses in
a capacitor under AC application. It is the ratio of the
equivalent series resistance to the capacitive reactance, and is usually expressed in percent. It is normally measured simultaneously with capacitance, and
under the same conditions. The vector diagram below
illustrates the relationship between DF, ESR and
impedance. The reciprocal of the dissipation factor is
called the “Q” or quality factor. For convenience, the
“Q” factor is often used for very low values of dissipation factor especially when measured at high frequencies. DF is sometimes called the “loss tangent” or “tangent ”, as shown in Figure 2.
ESR = Equivalent Series Resistance
X = Capacitive Reactance = 1/(2 πfC)
C
X = Inductive Reactance = (2 πf) (ESL)
L
The variation of a capacitor's impedance with frequency determines its effectiveness in many applications. At high frequency more detailed models apply see KEMET SPICE models for such instances.
7.
ESR
Figure 2
DF(%) = ESR x 100
Xc
O
δ
X
c
Ζ
1
Xc =
2 π fC
Insulation Resistance:
Measured after 2 minutes electrification at 25°C and
rated voltage: Limits per Table 3.
Insulation Resistance is the measure of a capacitor
to resist the flow of DC leakage current. It is sometimes
referred to as “leakage resistance”. Insulation resistance (IR) is the DC resistance measured across the
terminals of a capacitor, represented by the parallel
resistance (IR) shown in Figure 1. For a given dielectric
type, electrode area increases with capacitance, resulting in a decrease in the insulation resistance.
Consequently, insulation resistance limits are usually
specified as the “RC” (IR x C) product, in terms of ohmfarads or megohm-micro-farads. The insulation resistance for a specific capacitance value is determined by
dividing this product by the capacitance. However, as
the nominal capacitance values become small, the
insulation resistance calculated from the RC product
reaches values which are impractical. Consequently, IR
specifications usually include both a minimum RC product and a maximum limit based on the IR calculated
Table 3 – Specified Electrical Limits
Parameter
C0G
Temperature Characteristics
Z5U
X7R/X5R
Y5V
Capacitance & Dissipation Factor: Measured at following
conditions:
C0G – 1kHz and 1 vrms if capacitance >1000 pF
1MHz and 1 vrms if capacitance ≤1000 pF
X7R/X5R/Y5V – 1kHz and 1 vrms* if capacitance ≤ 10 µF
X7R/X5R/Y5V – 120Hz and 0.5 vrms if capacitance > 10 µF
Z5U – 1kHz and 0.5 vrms
DF Limits:
**X5R
<25V
<25V
Cap
<564
≥564
50 - 200 volts
DF
25 volts
5.0%
16 volts
10.0%
6.3/10 volts
–
–
–
–
0.10%
0.10%
---------------
Dielectric Strength: At 2.5 times rated DC voltage
Insulation Resistance (IR): At rated DC voltage, whichever
of the two is smaller. To get IR limit, divide MΩ−µF value by
the capacitance and compare to GΩ limit. Select the lower
of the two limits.
Temperature: Range, °C
Capacitance Change (without DC voltage)
2.5%
3.5%
3.5%
5.0%
2.5%
5.0%
**
**
4.0%
4.0%
-------
5.0%
7.0%
7.0%
10.0%
Pass Subsequent IR Test
1,000 MΩ – µF
or 100 GΩ
(100,000 MΩ)
1,000 MΩ – µF
or 100 GΩ
(100,000 MΩ)
100 MΩ – µF
or 10 GΩ
(10,000 MΩ)
100 MΩ – µF
or 10 G (≥16 volt)
50 MΩ – µF
or 10G (≤10v)
(10,000 MΩ)
-55 to +125
0 ± 30 ppm/°C
X7R: -55 to +125 ± 15%
X5R: -55 to +85 ± 15%
+10 to +85
+22% -56%
-30 to +85
+22% -82%
*Note: Some values measured at 1⁄2 volt, see X7R Table for specific details on pages 74 and 75.
68
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP CAPACITORS
However, this only defines an “envelope” bounded
by the upper and lower operating temperatures and the
minimum and maximum capacitance values. Within this
“envelope”, the variation with temperature depends
upon the specific dielectric formulation.
Insulation resistance decreases with increasing temperature. Typically, the insulation resistance limit at
maximum rated temperature is 10% of the 25°C value.
8.
9.
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current limited to 50mA at 25°C. Limits per Table 3.
Dielectric withstanding voltage (DWV) is the peak DC
voltage which a capacitor is designed to withstand
without damage for short periods of time. All KEMET
multilayer ceramic surface mount capacitors will withstand a DC test voltage of 2.5 x the rated voltage for 60
seconds.
KEMET specification limits for all electrical characteristics at standard measurement conditions are shown in
Table 3. Variations in these properties caused by
changing conditions (temperature, voltage, frequency,
and time) are covered in the following sections.
11.
Aging Rate:
Maximum % Capacitance Loss/Decade Hour
C0G - 0%
X7R - 2.0%
X5R - 5.0%
Z5U - 7.0%
Y5V - 7.0%
Actual rates may be lower. Consult factory for
details.
The capacitance of Class II and III dielectric changes
with time as well as with temperature, voltage and frequency. The change with time is known as “aging”. It is
caused by gradual realignment of the crystalline structure of the ceramic dielectric material as it is cooled
below its Curie temperature, which produces a loss of
capacitance with time. The aging process is predictable
and follows a logarithmic decay.
The aging process is reversible. If the capacitor is
heated to a temperature above its Curie point for some
period of time, de-aging will occur and the capacitor will
regain the capacitance lost during the aging process.
The amount of de-aging depends on both the elevated
temperature and the length of time at that temperature.
Exposure to 150°C for one-half hour is sufficient to
return the capacitor to its initial value.
Because the capacitance changes rapidly immediately after de-aging, capacitance measurements are
indexed to a referee time of 1,000 hours. All Kemet
capacitors are shipped to be within tolerance at the
referee time of 1,000 hours after the deaging process
(this time is often referred to as "last heat"). The selection
of this referree time has proven practical, as the actual 12.
decline of capacitance after 1,000 hours is very low.
10.
Effect of Temperature:
Both capacitance and dissipation factor are affected
by variations in temperature. The maximum capacitance
change with temperature is defined by the temperature
characteristic.
Effect of Voltage:
Certain high dielectric constant ceramic capacitors
may show variation in values of capacitance and dissipation factor with various levels of applied AC and DC
voltages. Such variation is a natural characteristic of
ceramic capacitors, and should be considered by the
circuit designer.
In general, ceramic capacitors with the lowest dielectric constant (C0G or NP0) are extremely stable, and
show little or no variation in capacitance and/or dissipation factor. On the other hand, ceramic capacitors with
the highest dielectric constant (Z5U & Y5V) may show
significant variation, particularly in capacitance. Other
dielectric formulations such as X7R and X5R will show
less variation than Y5V, but more than C0G.
The application of AC voltages in the range of 10 to
20 VAC tends to increase the values of both the capacitance and dissipation factor, while higher AC voltages
tend to produce decreases in both.
However, the variation of capacitance with applied
DC is the parameter of most interest to design engineers. Figure 8 shows typical variation of capacitance
with applied DC voltage for some standard dielectrics.
As can be seen, the decrease in capacitance is greatest
for the Y5V dielectric (the C0G is not plotted, since it
would not have a perceptible capacitance nor dissipa-
Figure 8 - Typical Variation of Capacitance with Applied DC Voltage
tion factor change.)
More detailed modelling information on the effect of
various voltages on specific capacitor ratings can be
obtained by use of the KEMET SPICE models, available
for free downloading at our website (www.kemet.com).
Effect of Frequency:
Frequency affects both capacitance and dissipation
factor. Typical curves for KEMET multilayer ceramic
capacitors are shown in Figures 4, 5, 6 and 7.
The variation of impedance with frequency is an
important consideration in the application of multilayer
ceramic capacitors. Total impedance of the capacitor is
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
69
Ceramic Surface Mount
from that value. For example, a typical IR specification
might read “1,000 megohm-microfarads or 100
gigohms, whichever is less”. The DC leakage current
may be calculated by dividing the applied voltage by
the insulation resistance (Ohm's Law).
CERAMIC CHIP CAPACITORS
the vector summation of the capacitive reactance, the
inductive reactance, and the ESR, as illustrated in
Figure 2. As frequency increases, the capacitive reactance decreases. However, the series inductance (L)
shown in Figure 1 produces some inductive reactance,
which increases with frequency. At some frequency, the
impedance ceases to be capacitive and becomes
inductive. This point, at the bottom of the V-shaped
impedance versus frequency curves, is the self-resonant frequency. At the self-resonant frequency, the
reactance is zero, and the impedance consists of the
ESR only. At high frequency more detailed models
apply - See KEMET SPICE models for such instances.
Typical impedance versus frequency curves for
KEMET multilayer ceramic capacitors are shown in
Figures 4, 5, 6 and 7.
dissipation. As with any practical device, multilayer
ceramic capacitors also possess an inherent, although
low, failure rate when operated within rated conditions.
The primary failure mode is by short-circuit or low insulation resistance, resulting from cracks or from dielectric
breakdown at a defect site. KEMET monitors reliability
with a periodic sampling program for selected values.
Results are available in our FIT (Failure in Time) report
for commercial chips.
21.
ENVIRONMENTAL AND PHYSICAL
13.
Thermal Shock:
EIA-198, Method 202, Condition B (5 cycles
-55° to + 125°C).
14.
Life Test:
EIA-198, Method 201, 1000 hours at 200%* of rated
voltage at 125°C. (Except 85°C for Z5U, Y5V & X5R).
See Table 4 on page 71 for limits.
15.
Humidity Test:
EIA-198, Method 206, ( Except 1000 hours,85°C,
85% RH, Rated Voltage).
See Table 4 on page 71 for limits.
Storage and Handling:
Ceramic chip capacitors should be stored in normal
working environments. While the chips themselves are
quite robust in other environments, solderability will be
degraded by exposure to high temperatures, high
humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded
by high temperature – reels may soften or warp, and
tape peel force may increase. KEMET recommends
that maximum storage temperature not exceed 40
degrees C, and maximum storage humidity not exceed
70% relative humidity. In addition, temperature fluctuations should be minimized to avoid condensation on
the parts, and atmospheres should be free of chlorine
and sulfur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably
within 1.5 years of receipt.
*Note: 150% of rated voltage for selected high capacitance X5R values. Please contact factory.
16.
Moisture Resistance:
EIA-198, Method 204, Condition B (20 cycles with
50 volts applied.
See Table 4 on page 71 for limits.
17.
Solderability:
EIA-198, Method 301 (245°, 5 secs, Sn62 solder)
95% smooth solder on terminations. See page 14
for recommended profiles.
18.
Resistance to Soldering Heat:
EIA-198, Method 302, Condition B (260°C, 10 seconds) no leaching of nickel barrier.
19.
Terminal Strength:
EIA-198, Method 303, Condition D .
RELIABILITY
20.
70
A well constructed multilayer ceramic capacitor chip is
extremely reliable and, for all practical purposes, has no
wearout mechanism when used within the maximum
voltage and temperature ratings. Most failures occur as
a result of mechanical or thermal damage during
mounting on the board, or during subsequent testing.
Capacitor failure may also be induced by sustained
operation at voltages that exceed the rated DC voltage,
voltage spikes or transients that exceed the dielectric's
voltage capability, sustained operation at temperatures
above the maximum rated temperature, internal
defects, or excessive temperature rise due to power
MISAPPLICATION
22.
Ceramic capacitors, like any other capacitors, may fail if
they are misapplied. Some misapplications include
mechanical damage, such as impact or excessive flexing of the circuit board. Others include severe mounting
or rework cycles that may also introduce thermal shock.
Still others include exposure to excessive voltage, current or temperature. If the dielectric layer of the capacitor is damaged by misapplication, the circuit may fail.
The electrical energy of the circuit can be released as
heat, which may damage the circuit board and other
components as well.
ADDITIONAL INFORMATION
23.
Detailed application information can be found in KEMET
Engineering Bulletins.
F-2100
F-2102
F-2105
F-2103
F-2110
F-2111
Surface Mount-Mounting Pad
Dimensions and Considerations
Reflow Soldering Process
Wave Solder Process
Surface Mount Repair
Capacitance Monitoring while Flex Testing
Ceramic Chip Capacitors “Flex Cracks” Understanding and Solutions
For analysis of high frequency applications, KEMET
has SPICE models of most chip capacitors. Models
may be downloaded from KEMET’s website
www.kemet.com.
Additional information is also available - See
your KEMET representative for details or post your
questions to KEMET's homepage on the web
http://www.kemet.com.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP CAPACITORS
TABLE 4 – ENVIRONMENTAL LIMITS
Rated DC
Voltage
Body
200 ∗
100
50
25
16
200 ∗
100
50
25
16
6.3/10
C0G
X7R
X5R
50V all cap values
25V all cap values
<25<_564 cap value
>564 cap value
100
50
25
100
50
25
16
6.3/10
Z5U
Y5V
IR (GΩ or ΩF)
whichever is less
Post Life/
Hum/Moisture
Resistance
Cap Shift (% or pf,
whichever is greater)
IR
DF (%)
Post Life/
(GΩ or ΩF)
Post Life/
Initial whichever is Hum/Moisture
Hum/Moisture
DF (%)
Resistance
less
Resistance
0.1
0.1
0.1
0.1
0.1
2.5
2.5
2.5
3.5
3.5
5.0
2.5
5.0
5.0
10.0
4.0
4.0
4.0
5.0
5.0
7.0
7.0
10.0
100/1000
100/1000
100/1000
100/1000
100/1000
100/1000
100/1000
100/1000
100/1000
100/1000
100/1000
100/1000
100/1000
100/1000
100/1000
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/50
0.5
0.5
0.5
0.5
0.5
3.0
3.0
3.0
5.0
5.0
7.5
3.0
7.5
7.5
12.0
5.0
5.0
7.5
7.5
7.5
10.0
10.0
15.0
0.3% or ± 0.25 pf
0.3% or ± 0.25 pf
0.3% or ± 0.25 pf
0.3% or ± 0.25 pf
0.3% or ± 0.25 pf
± 20%
± 20%
± 20%
± 20%
± 20%
± 20%
± 20%
± 20%
± 20%
± 20%
± 30%
± 30%
± 30%
± 30%
± 30%
± 30%
± 30%
± 30%
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
10/100
1/10
1/10
1/10
1/10
1/10
1/10
1/10
1/5
*200 Volt limits not currently included in EIA-198.
PERFORMANCE CURVES
EFFECT OF FREQUENCY
(See SPICE models for specific ratings.)
Impedance (Ohms)
100,000
10,000
100
1,000
100
10
10
0805
103
1
1
0.1
2225
103
0.01
0.001
0.1
Ceramic Surface Mount
Impedance (Ohms)
1,000
0.3
1
3
10
30
Frequency (MHz)
0603
101
0805
101
1206
103
0.1
1206
102
100
0805
104
1206
104
300
1,000
0.01
0.1
0.3
FIGURE 5
FIGURE 4. Impedance versus Frequency C0G Dielectric
Impedance (Ohms)
30
1
3
0603
103
30
10
Frequency (MHz)
100
300
1,000
Impedance versus Frequency X7R Dielectric
Impedance (Ohms)
10
10
1
3
0.1
1
0805
104
Y5V
1206
105
Y5V
0.3
0603
104
Y5V
1206
104
Z5U
0.01
0.1
0.001
0.1
0.03
0.1
0.3
1
3
10
30
Frequency (MHz)
100
300
1,000
FIGURE 6. Impedance versus Frequency Z5U/Y5V Dielectric
1
10
Frequency (MHz)
C0603C105K8P
C0805C106K9P
FIGURE 7.
AC
AC
100
C1206C105K8P
C1206C106K8P
1000
AC
AC
Impedence versus Frequency X5R Dielectric
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
71
CERAMIC CHIP CAPACITORS
FEATURES
• C0G (NP0), X7R, X5R, Z5U and Y5V Dielectrics
• 10, 16, 25, 50, 100 and 200 Volts
• Standard End Metalization: Tin-plate over nickel
barrier
• Available Capacitance Tolerances: ±0.10 pF; ±0.25
pF; ±0.5 pF; ±1%; ±2%; ±5%; ±10%; ±20%; and
+80%-20%
• Tape and reel packaging per EIA481-1. (See page
92 for specific tape and reel information.) Bulk
Cassette packaging (0402, 0603, 0805 only) per
IEC60286-6 and EIAJ 7201.
• RoHS Compliant
CAPACITOR OUTLINE DRAWINGS
TIN PLATE
L
W
B
T
NICKEL PLATE
S
ELECTRODES
CONDUCTIVE
METALLIZATION
DIMENSIONS—MILLIMETERS AND (INCHES)
METRIC
SIZE
CODE
METRIC
(Ref only)
0603
1608
0.6 (.024) ± .03 (.001)
0.3 ± (.012) ± .03 (.001)
0.15 (.006) ± .05 (.002)
N/A
1005
2012
1.0 (.04) ± .05 (.002)
0.5 (.02) ± .05 (.002)
0.20 (.008) -.40 (.016)
0.3 (.012)
0201*
0603*
0402*
0805*
1005
B - BANDWIDTH
S
SEPARATION
minimum
W - WIDTH
SIZE CODE
0402*
T
THICKNESS
L - LENGTH
CODE
0603
1206*
1608
3216
1.6 (.063) ± .15 (.006)
0.8 (.032) ± .15 (.006)
0.35 (.014) ± .15 (.006)
0.7 (.028)
0805*
1210*
2012
3225
2.0 (.079) ± .20 (.008)
1.25 (.049) ± .20 (.008)
0.50 (.02) ± .25 (.010)
0.75 (.030)
1206*
3216
3.2 (.126) ± .20 (.008)
1.6 (.063) ± .20 (.008)
0.50 (.02) ± .25 (.010)
N/A
1210*
3225
3.2 (.126) ± .20 (.008)
2.5 (.098) ± .20 (.008)
1812
4532
4.5 (.177) ± .30 (.012)
3.2 (.126) ± .30 (.012)
4564
4.5 (.177) ± .30 (.012)
1812
1825*
2220
1825*
2225
4532
4564
5650
See page 78
for thickness
dimensions.
0.50 (.02) ± .25 (.010)
N/A
0.60 (.024) ± .35 (.014)
N/A
6.4 (.252) ± .40 (.016)
0.60 (.024) ± .35 (.014)
N/A
2220
5650
5664
5.6 (.220) ± .40 (.016)
5.0 (.197) ± .40 (.016)
0.60 (.024) ± .35 (.014)
N/A
2225
5664
5.6 (.220) ± .40 (.016)
6.3 (.248) ± .40 (.016)
0.60 (.024) ± .35 (.014)
N/A
MOUNTING
TECHNIQUE
Solder Reflow
or
Solder Wave +
or
Solder Reflow
Solder
Reflow
Solder Reflow
* Note: Indicates EIA Preferred Case Sizes (Tightened tolerances apply for 0402, 0603, and 0805 packaged in bulk bassette, see page 96.)
+ For extended value 1210 case size - solder reflow only.
CAPACITOR ORDERING INFORMATION (Standard Chips - For
C 0805 C 103 K 5 R A C*
CERAMIC
SIZE CODE
SPECIFICATION
C - Standard
CAPACITANCE CODE
Expressed in Picofarads (pF)
First two digits represent significant figures.
Third digit specifies number of zeros. (Use 9
for 1.0 through 9.9pF. Use 8 for 0.5 through 0.99pF)
(Example: 2.2pF = 229 or 0.50 pF = 508)
CAPACITANCE TOLERANCE
B – ±0.10pF J – ±5%
C – ±0.25pF K – ±10%
D – ±0.5pF
M – ±20%
F – ±1%
P – (GMV) – special order only
G – ±2%
Z – +80%, -20%
72
Military see page 87)
END METALLIZATION
C-Standard (Tin-plated nickel barrier)
FAILURE RATE LEVEL
A- Not Applicable
TEMPERATURE CHARACTERISTIC
Designated by Capacitance
Change Over Temperature Range
G – C0G (NP0) (±30 PPM/°C)
R – X7R (±15%) (-55°C + 125°C)
P– X5R (±15%) (-55°C + 85°C)
U – Z5U (+22%, -56%) (+10°C + 85°C)
V – Y5V (+22%, -82%) (-30°C + 85°C)
VOLTAGE
1 - 100V
3 - 25V
2 - 200V
4 - 16V
5 - 50V
8 - 10V
* Part Number Example: C0805C103K5RAC (14 digits - no spaces)
7 - 4V
9 - 6.3V
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Ceramic Surface Mount
EIA
EIA SIZE
SIZE
CODE
CERAMIC CHIP/STANDARD
C0G CAPACITANCE RANGE – 0201, 0402, 0603, 0805, 1206
Cap
Code
Cap
Tolerance
25V
C0603*
C0402*
C0201*
10V
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
16V
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
25V
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
50V
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
10V
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
16V
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
25V
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
50V 100V 200V
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB
CB
CB
CB
CB
CC
CC
CC
CC
CC
CC
CC
0.50 508 C,D
0.75 758 C,D
1.0 109 C,D
1.1 119 C,D
1.2 129 C,D
1.5 159 C,D
1.6 169 C,D
1.8 189 C,D
2.0 209 C,D
2.2 229 C,D
2.4 249 C,D
2.7 279 C,D
K,M
3.0 309 C,D
K,M
3.3 339 C,D
K,M
3.9 399 C,D
K,M
4.3 439 C,D
K,M
4.7 479 C,D
K,M
5.1 519 C,D
K,M
5.6 569 C,D
J,K,M
6.0 609 C,D
J,K,M
6.2 629 C,D
J,K,M
6.8 689 C,D
J,K,M
7.0 709 C,D
J,K,M
7.5 759 C,D
J,K,M
8.2 829 C,D
J,K,M
9.1 919 C,D
J,K,M
AA^
10.0 100 C,D
J,K,M
11.0 110 C,D
J,K,M
AA~
12.0 120 C,D
J,K,M
13.0 130 C,D
J,K,M
AA~
15.0 150 C,D G,J,K,M
16.0 160 C,D G,J,K,M
AA~
18.0 180 C,D G,J,K,M
20.0 200 C,D G,J,K,M
AA~
22.0 220 C,D G,J,K,M
24.0 240 C,D G,J,K,M
AA~
27.0 270
D,F,G,J,K,M
30.0 300
D,F,G,J,K,M
AA~
33.0 330
D,F,G,J,K,M
36.0 360
D,F,G,J,K,M
AA~
39.0 390
D,F,G,J,K,M
43.0 430
D,F,G,J,K,M
AA~
47.0 470
D,F,G,J,K,M
51.0 510
D,F,G,J,K,M
AA~
56.0 560
F,G,J,K,M
62.0 620
F,G,J,K,M
AA~
68.0 680
F,G,J,K,M
75.0 750
F,G,J,K,M
AA~
82.0 820
F,G,J,K,M
91.0 910
F,G,J,K,M
AA~
100.0 101
F,G,J,K,M
110.0 111
F,G,J,K,M
120.0 121
F,G,J,K,M
BB•
130.0 131
F,G,J,K,M
150.0 151
F,G,J,K,M
BB•
160.0 161
F,G,J,K,M
180.0 181
F,G,J,K,M
BB•
200.0 201
F,G,J,K,M
220.0 221
F,G,J,K,M
BB•
240.0 241
F,G,J,K,M
270.0 271
F,G,J,K,M
BB•
300.0 301
F,G,J,K,M
330.0 331
F,G,J,K,M
BB•
360.0 361
F,G,J,K,M
390.0 391
F,G,J,K,M
430.0 431
F,G,J,K,M
470.0 471
F,G,J,K,M
BB
510.0 511
F,G,J,K,M
560.0 561
F,G,J,K,M
BB
620.0 621
F,G,J,K,M
680.0 681
F,G,J,K,M
BB
750.0 751
F,G,J,K,M
820.0 821
F,G,J,K,M
BB
910.0 911
F,G,J,K,M
F,G,J,K,M
BB
1000.0 102
F,G,J,K,M
1100.0 112
F,G,J,K,M
1200.0 122
F,G,J,K,M
1300.0 132
F,G,J,K,M
1500.0 152
F,G,J,K,M
1600.0 162
F,G,J,K,M
1800.0 182
F,G,J,K,M
2000.0 202
F,G,J,K,M
CC
2200.0 222
F,G,J,K,M
2400.0 242
F,G,J,K,M
CC
2700.0 272
F,G,J,K,M
3000.0 302
F,G,J,K,M
CC
3300.0 332
F,G,J,K,M
3600.0 362
F,G,J,K,M
CC
3900.0 392
F,G,J,K,M
4300.0 432
F,G,J,K,M
CC
4700.0 472
F,G,J,K,M
5100.0 512
F,G,J,K,M
CC
5600.0 562
F,G,J,K,M
6200.0 622
F,G,J,K,M
CC
6800.0 682
F,G,J,K,M
7500.0 752
F,G,J,K,M
CC
8200.0 822
F,G,J,K,M
9100.0 912
F,G,J,K,M
CC
10,000.0 103
F,G,J,K,M
18,000.0 183
F,G,J,K,M
22,000.0 223
F,G,J,K,M
33,000.0 333
F,G,J,K,M
47,000.0 473
F,G,J,K,M
68,000.0 683
F,G,J,K,M
100,000.0 104
* Indicates EIA preferred chip sizes.
NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.
50 Volt Ceramic Chips can be used in 63 volt applications.
C0805*
10V
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
DC
DC
DC
DC
DD
DD
DD
DE
16V
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
DC
DC
DC
DC
DD
DD
DD
DE
25V
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
DC
DC
DC
DC
DD
DD
DD
DE
DC
DC
DC
DC
DC
DC
DD
DJ
50V 100V 200V 10V
DC DC
DC
DC DC
DC
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DC EB
DC DC
DD EB
DC DC
EB
DC DC
EB
DC DC
EB
DC DC
EB
DC DC
EB
DC DC
EB
DC DD
EB
DC DD
EB
DC
EB
DC
EB
DD
EB
DD
EB
DD
EB
DD
EB
EB
EB
EB
EB
EC
EC
EC
EC
EC
EC
ED
ED
EB
EB
EB
EC
EC
ED
C1206*
16V 25V 50V 100V 200V
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EC
EC
ED
ED
EB
EB
EB
EC
EC
ED
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EC
EC
ED
ED
EB
EB
EB
EC
EC
ED
EB
EB
EB
EC
EF
EH
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EC
EC
ED
ED
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
ED
ED
ED
ED
EE
EC
EC
EC
EE
EE
EF
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
ED
EE
EB
EB
EC
EC
ED
ED
Ceramic Surface Mount
Cap
pF
Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET’s option.
Reels with such substitutions will be marked with the improved KEMET part numbers.
• Greater or equal to J (5%) tolerance available.
• J Tolerance Only; ^ = D Tolerance Only
~ = J,K,M Tolerance Only
See page 78 for Thickness Code Reference Chart.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
73
CERAMIC CHIP/STANDARD
C0G CAPACITANCE RANGE – 1210, 1812, 1825, 2220, 2225
Cap
Cap
Code CAP.
Tolerance
TOL. J,K,M
100 D
120
J,K,M
C ,D D J ,K
,M
150
C ,D D G,J,K,M
J ,K ,M
180
D
G,J,K,M
C ,D G ,J ,K ,M
220 D G,J,K,M
C ,D G ,J ,K ,M
270 D,F,G,J,K,M
C ,D G ,J ,K ,M
330 D,F,G,J,K,M
,G ,J ,K ,M
390D,FD,F,G,J,K,M
,G ,J ,K ,M
470D,FD,F,G,J,K,M
,J ,K ,M
560D,F,GF,G,J,K,M
,J ,K ,M
680D,F,GF,G,J,K,M
,J ,K ,M
820 F,GF,G,J,K,M
F
,G
,J ,K ,M
101
F,G,J,K,M
,J ,K ,M
121 F,GF,G,J,K,M
,J ,K ,M
151 F,GF,G,J,K,M
,J ,K ,M
181 F,GF,G,J,K,M
221 F,GF,G,J,K,M
,J ,K ,M
271 F,GF,G,J,K,M
,J ,K ,M
331 F,GF,G,J,K,M
,J ,K ,M
391 F,GF,G,J,K,M
,J ,K ,M
471 F,GF,G,J,K,M
,J ,K ,M
561 F,GF,G,J,K,M
,J ,K ,M
681 F,GF,G,J,K,M
,J ,K ,M
821 F,GF,G,J,K,M
,J ,K ,M
102 F,GF,G,J,K,M
,J ,K ,M
122 F,GF,G,J,K,M
,J ,K ,M
152
F,GF,G,J,K,M
,J ,K ,M
182
F,G,J,K,M
F,G ,J ,K ,M
222
F,G,J,K,M
,J ,K ,M
272 F,GF,G,J,K,M
,J ,K ,M
332 F,GF,G,J,K,M
F
,G
,J ,K ,M
392
F,G,J,K,M
,J ,K ,M
472 F,GF,G,J,K,M
F
,G
,J ,K ,M
562
F,G,J,K,M
,J ,K ,M
682 F,GF,G,J,K,M
,J ,K ,M
822 F,GF,G,J,K,M
,J ,K ,M
103 F,GF,G,J,K,M
,J ,K ,M
123 F,GF,G,J,K,M
153 F,GF,G,J,K,M
,J ,K ,M
183 F,GF,G,J,K,M
,J ,K ,M
223 F,GF,G,J,K,M
,J ,K ,M
273 F,GF,G,J,K,M
,J ,K ,M
333 F,GF,G,J,K,M
,J ,K ,M
473 F,GF,G,J,K,M
,J ,K ,M
683 F,GF,G,J,K,M
,J ,K ,M
104 F,GF,G,J,K,M
,J ,K ,M
220,000.0 224
F,G,J,K,M
C1210*
Cap
pF
CAP.
CAP
PF
CODE
10.0
12.0
10
100
15.0
12
120
18.0
15
150
22.0
18
180
27.0
22
220
33.0
27
270
39.0
33
330
47.0
39
390
56.0
47
470
68.0
56
560
82.0
68
680
100.0
82
820
120.0
100
101
150.0
120
121
180.0
150
151
220.0
270.0
180
181
330.0
220
221
390.0
270
271
470.0
330
331
560.0
390
391
680.0
470
471
820.0
560
561
1,000.0
680
681
1,200.0
820
821
1,500.0
1000
102
1,800.0
1200
122
2,200.0
1500
152
2,700.0
1800
182
3,300.0
2200
222
3,900.0
2700
272
4,700.0
3300
332
5,600.0
3900
392
6,800.0
4700
472
8,200.0
5600 10,000.0
562
6800 12,000.0
682
8200 15,000.0
822
10,000 18,000.0
103
12,000 22,000.0
123
15,000 27,000.0
153
18,000 33,000.0
183
22,000 47,000.0
223
27,000 68,000.0
273
33,000 100,000.0
333
25V 50V
FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB FB
FB
FB
FB
FB
FB FB
FB
FB
FB FB
FB
FB FB
FB
FB FB
FC
FB FB
FC
FB
FF
FF
FB FB
FF
FB FB
FF
FF
FC
FF
FB
FF
FG
FB FG
C1812*
100V 200V
FB
FB
FBFB FB
FBFB FB
FBFB FB
FB
FB FB
FB
FB
FB FB
FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FBFB FB
FB
FB FE
FB
FE
FB FG
FC
FE FC
FC
FFFE FF
FFFG
FGFC
FGFF
FG
C1825*
C2220
C2225
50V 100V 200V 50V 100V 200V 50V 100V 200V 50V 100V 200V
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GH
GG
FC
FF
FB
FG
FB
FB
FB
FB
FE
FK+
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GD
GH
GJ
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HB
HE
HE
HB
HB
HB
HB
HB
HE
HE
JB
JB
JB
JB
JB
JB
JB
JB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
JB
JB
JB
JB
JB
JB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KE
X7R CAPACITANCE RANGE – 0402, 0603, 0805, 1206
Cap
pF
150
180
220
270
330
390
470
560
680
820
1,000
1,200
1,500
1,800
2,200
2,700
3,300
3,900
4,700
5,600
6,800
8,200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
470,000
560,000
680,000
820,000
1,000,000
1,200,000
1,500,000
1,800,000
2,200,000
2,700,000
3,300,000
3,900,000
4,700,000
5,600,000
6,800,000
8,200,000
10,000,000
Cap
Code
Cap
Tolerance
151
181
221
271
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
335
395
475
565
685
825
106
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J*
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
K,M,J**
C0603
C0402
6.3V
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
10V
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
16V
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
25V
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
50V 6.3V 10V
BB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
BB CB CB
CB CB
CB CB
CB CB
BB* BB* CB CB
CB CB
CB CB
CB CB
BB*
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CD
C0805
C1206
16V 25V 50V 100V 200V 6.3V 10V 16V 25V 50V 100V 200V 6.3V 10V
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB CB
CB
CB
CB
CB CD*
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CC
CC
CC
CC
CD*
CD CD*
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CC
CC
CC
CC
CC
CC
CC
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CB
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DC DC DC DC DC
DD DD DD DD DD
DD DD DD DD DD
DD DD DD DD DD
DD DD DD DD DD
DC DC DC DC DD
DC DC DC DC DD
DC DC DC DC DD
DC DC DC DC DD
DD DD DD DD
DE DE DE DE
DG DG DG DG
DG DG DG DG DE*
DG DG DG DG
DG DG DG
DJ*
DG DG DG
DG DG DG DJ*
DE DE DE
DG DG DG
DG DG DG
DG DG DG
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DD
DD
DD
DD
DD
DD
DE
DE
DE
DE
DE
DG
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DC
DE
DE
DE
DG
DG
DG
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EB
EB
EB
EC
ED
EE
EF
EE
ED
EF
EF
EG
EN
ED
EL
EM*+
EH*+
EH*+
EH*+
EH*+
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EB
EB
EB
EC
ED
EE
EF
EE
ED
EF
EF
EG
EN
ED
EL
EM*+
EH*+
EH*+
EH*+
EH*+
16V
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EB
EB
EB
EC
ED
EE
EF
EF
ED
EF
EF
EG
EK
ED
EL
EM*+
EH*+
EH*+
EH*+
EH*+
25V 50V 100V 200V
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EB
EB
EB
EC
ED
EE
EF
EG
EG
EG
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EC
EC
EC
EC
EG
EC
EC
ED
ED*
EF* EH*+
EH*+
* Capacitance K or M. ontact KEMET Sales Rep for J tolerance availability. +_ Reflow Only.
NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.
# X7R dielectric - Extended Range Values - Cap and DF measured @ 0.5 Vrms.
Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET's option.
Reels with such substitutions will be marked with the improved KEMET part numbers.
See
Code Reference
ReferenceChart.
Chart.
Seepage
page 78
63 for Thickness Code
74
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EC
EC
EB
EB
EB
EB
EC
EC
EC
EC
EM
EG
EG
EG
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
EB
ED
ED
ED
ED
EM
EM
EG
CERAMIC CHIP/STANDARD
X7R CAPACITANCE RANGE – 1210, 1812, 1825, 2220, 2225
Cap
Code
Cap
Tol.
2,200
2,700
3,300
3,900
4,700
5,600
6,800
8,200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
470,000
560,000
680,000
820,000
1,000,000
1,200,000
1,500,000
1,800,000
2,200,000
2,270,000
3,300,000
3,900,000
4,700,000
5,600,000
6,800,000
8,200,000
10,000,000
12,000,000
15,000,000
18,000,000
22,000,000
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
335
395
475
565
685
825
106
126
156
186
226
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
K,M,J
C1210*
6.3V
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FC
FC
FC
FD
FD
FD
FD
FD
FF
FH
FH
FH
FH
10V
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FC
FC
FC
FD
FD
FD
FD
FD
FF
FH
FH
FH
FH
16V
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FC
FC
FC
FC
FD
FD
FD
FD
FD
FF
FH
FH
FH
FH
C1812*
C1825*
C2220
C2225
25V 50V 100V 200V 25V 50V 100V 200V 50V 100V 200V 50V 100V 200V 50V 100V 200V
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
FB
GB GB GB
GB
FB
FB
FB
FB
GB GB GB
GB
FB
FB
FB
FB
GB GB GB
GB
FB
FB
FB
FB
GB GB GB
GB
FB
FB
FB
FB
GB GB GB
GB
FB
FB
FB
FB
GB GB GB
GB
FB
FB
FB
FB
GB GB GB
GB
HB
HB
HB
FB
FB
FB
FB
GB GB GB
GB
HB
HB
HB
FB
FB
FB
FB
GB GB GB
GB
HB
HB
HB
FB
FB
FB
FB
GB GB GB
GB
HB
HB
HB
FB
FB
FB
FC
GB GB GB
GB
HB
HB
HB
KC
KC
KC
FB
FB
FB
FC
GB GB GB
GB
HB
HB
HB
KC
KC
KC
FB
FB
FB
FC
GB GB GB
GB
HB
HB
HB
KC
KC
KC
FB
FC
FC
FF
GB GB GB
GB
HB
HB
HB
KC
KC
KC
FB
FB
FD
FG GB GB GB
GB
HB
HB
HB
KC
KC
KC
FB
FB
FD
GB GB GB
GB
HB
HB
HB
KC
KC
KC
FC FC
FD
GB GB GB
GE
HB
HB
HB
KC
KC
KC
FC FC
FD
GB GB GB
GG
HB
HB
HB
KC
KC
KC
FC FC
FD
GB GB GB
HB
HB
HB
KC
KC
KC
FC FC
FD
GB GB GH
HB
HB
HB
JC
JC
JC
KB
KC
KC
FD FD
FD
GB GB GH
HB
HB
HB
JC
JC
JC
KB
KC
KC
FD FD
GB GB GG
HB
HB
HD
JC
JC
JC
KB
KC
KC
FD FD
FD
GB GB GG
HB
HB
JC
JC
KB
KC
KD
FD FD
GC GC GG
HB
HD
JC
JC
KB
KC
FD FD
GC GC GG
HB
HD
JC
JD
KB
KC
FF
FF
GE GE GG
HB
JC
JF
KB
KC
FH FH
FM
GE GE GG
HB
JC
KB
KD
FH
HB
JC
KB
FH
HB
JC
KC
FH
HD
JD
KD
FJ FG*+
HF
JF
KD
FM*+
FC*+ FC*+ FC*+ FG*+ FS*+
GK+ GK+
FM+
FH*+ FH*+ FH*+ FS+
GK+
Ceramic Surface Mount
Cap
pF
* Capacitance tolerance K or M. Contact your local KEMET Sales Rep for J tolerance availablity. + Reflow Only
NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.
50 Volt Ceramic Chips can be used for 63 volt applications.
# Extended Range Values – Cap and DF measured @ 0.5 Vrms.
Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET's option.
Reels with such substitutions will be marked with the improved KEMET part numbers.
Y5V CAPACITANCE RANGE
Cap
pF
22,000
33,000
47,000
68,000
100,000
150,000
220,000
330,000
470,000
680,000
1,000,000
1,500,000
2,200,000
3,300,000
4,700,000
6,800,000
10,000,000
15,000,000
22,000,000
Cap
Code
223
333
473
683
104
154
224
334
474
684
105
155
225
335
475
685
106
156
226
C0402*
C0603*
Cap
Tol. 6.3V 10V 16V 6.3V 10V 16V
Z
Z
Z
BB BB BB
Z
BB BB BB
Z
BB BB BB CB CB CB
Z
CB CB CB
Z
CB CB CB
Z
CB CB CB
Z
CC CC
Z
CC CC
Z
CC CC
Z
Z
Z
Z
Z
Z
Z
Z
C0805*
C1206*
C1210*
25V 6.3V 10V 16V 25V 50V 6.3V 10V 16V 25V 50V 6.3V 10V 16V
DC
EB
DC
EB
DD
EB
DD
EB
CB
DD
EB
CB DC DC DC DC
EC
CB DC DC DC DC
EC
CB DC DC DC DC
EB
DC DC DC DC
EC
DE DE DE DE
EB
DG DG DG DG
EG EG EG EG
DG DG DG
EC EC EC
FD+
DG DG DG
ED ED ED
FD+
DE DE
EF EF EF
FE+
DG DG
EJ EJ EM
FG+ FG+ FG+
EJ EJ
FH+ FH+ FH+
DH
EJ EH
FH+ FH+ FP+
FD+ FD+
EH
FT+ FT+
25V 50V
FD+
FD+
FD+
FD+
FH+
FD+
FD+
FD+
FD+
FH+
NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.
50 Volt Ceramic Chips can be used for 63 volt applications.
* EIA preferred chip sizes
+ Reflow only
See page 78 for Thickness Code Reference Chart
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
75
CERAMIC CHIP/STANDARD
X5R CAPACITANCE RANGE
Cap
pF
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
270,000
330,000
390,000
470,000
560,000
680,000
820,000
1,000,000
1,200,000
1,500,000
1,800,000
2,200,000
2,700,000
3,300,000
4,700,000
5,600,000
6,800,000
8,200,000
10,000,000
12,000,000
15,000,000
18,000,000
22,000,000
27,000,000
33,000,000
39,000,000
47,000,000
100,000,000
Cap
Code
Cap
Tolerance
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
335
475
565
685
825
106
126
156
186
226
276
336
396
476
107
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
0201
C0402*
6.3V 16V 6.3V
AA~
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
AA~
BB
C0603*
10V
16V
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
BB
6.3V
10V
16V
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
CC
C0805*
25V
4V
C1206*
6.3V 10V 16V 25V 6.3V
C1210*
10V 16V 25V
6.3V 10V 16V 25V
50V
BB
BB
BB
BB°
CD
CC+ CC+ CC+
DG
DD
DE
DH
DD
DG
DD
DE
DH
DG
DG
DD
DE
DH
DD
CD+
DE
DH
DE
DH
CD°+
DJ+
DH°+
DJ°+
DC
DD
DE
DF
DG
DH
DH
EC
EC
EE
EF
EH
EH
EC
EC
EE
EF
EH
EH
EC
EC
EE
EF
EH
EH
DJ+ DK+
ED
ED
EH
ED
ED
EH
EH
EH
EH
EH+
EH°+
EH°+
EB
EB
EB
EC
ED
EE
EF
EH
EC
EC
EC
EE
EF
EH
EH
FK+
FH+
FD+
FD+
FD+
FG+
FG+
FH+
FK+ FK+
FH+ FH+
FD+
FD+
FD+
FG+
FG+
FH+
FK+
FJ+ FJ+ FJ+ FF+
FK+ FK+ FK+ FG+
EH+ FK+ FK+ FK+ FH+
FD+ FD+ FG+
FD+ FD+ FL+
FL+ FL+ FH+
FH+ FH+ FJ+
FQ°+
FQ°+
NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.
+Reflow only
° Available M ±20% tolerance only
Improved product with higher ratings and tighter capacitance tolerance product may be substituted within the same size (length, width, and thickness) at KEMET's option.
Reels with such substitutions will be marked with the improved KEMET part numbers.
Cap
CAP.
PF
pF
6800
6,800
8200
8,200
10,000
10,000
12,000
12,000
15,000
15,000
18,000
18,000
22,000
22,000
27,000
27,000
33,000
33,000
39,000
39,000
47,000
47,000
56,000
56,000
68,000
68,000
82,000
82,000
100,000
100,000
120,000
120,000
150,000
150,000
180,000
180,000
220,000
220,000
270,000
270,000
330,000
330,000
390,000
390,000
470,000
470,000
560,000
560,000
680,000
680,000
820,000
820,000
1,000,000
1,000,000
1,200,000
1,200,000
1,500,000
1,500,000
1,800,000
1,800,000
2,200,000
2,200,000
2,700,000
2,700,000
C1206*
C1210*
C1812*
C1825*
C0805*
C1206*
C1210*
C1812*
C1825*
Cap
CAP Cap
CAP C0805*
50V 100V
100V 50V
50V 100V
100V
50V 100V
100V 50V
50V 100V
100V 50V
50V 100V
100V 50V
CODETol.
TOL 50V
Code
M,Z DC
DC DC
DC
682682 M,Z
M,Z DC
DC DC
DC
822822 M,Z
EB
M,Z DC
DC DC
DC EB
EB EB
103103 M,Z
EB
M,Z DC
DC
EB EB
123123 M,Z
EB
EB
M,Z DC
DC
EB EB
153153 M,Z
EB
EB
M,Z DC
DC
EB EB
183183 M,Z
EB
EB
M,Z DC
DC
EB EB
223223 M,Z
EB
EB
273
M,Z
DC
EB
273
M,Z
DC
EB
EB
EB
M,Z DC
DC
EB EB
333333 M,Z
EB
EC
M,Z DD
DD
EB EC
393393 M,Z
EB
FB
FB FB
EC FB
M,Z DD
DD
EB EC
473473 M,Z
EB
FB
FB FB
EB FB
M,Z DD
DD
EB EB
563563 M,Z
EB
FB
FB FB
EB FB
M,Z DD
DD
EB EB
683683 M,Z
EB
GB
GB GB
FC GB
FB FC
EB FB
M,Z DD
DD
EB EB
823823 M,Z
EB
GB
GB GB
FD GB
FB FD
EB FB
104104 M,Z
EB
M,Z DD
DD
EB EB
GB
GB GB
FD GB
FB FD
124124 M,Z
EC
FB
M,Z
EC
GB
GB GB
FD GB
154154 M,Z
EC
FC
FC FD
M,Z
EC
HB
HB HB
184184 M,Z
EC
FC
GB
HB
GB
FC
M,Z
EC
224224 M,Z
EC
FC
GB
HB
HB
HB HB
GB
FC
M,Z
EC
274274 M,Z
FC
GB
HB
HB
HB HB
GB
FC
M,Z
334334 M,Z
FD
GB
HB
HB
HB HB
GB
FD
M,Z
394394 M,Z
FD
GB
HB
HD
HB HD
GB
FD
M,Z
474474 M,Z
FD
GB
HB
HB
GB
FD
M,Z
564564 M,Z
FD
GC
HB
HB
GC
FD
M,Z
684684 M,Z
FD
GC
HB
HB
GC
FD
M,Z
824824 M,Z
FF
GE
HB
HB
GE
FF
M,Z
105105 M,Z
FH
GE
HB
HB
GE
FH
M,Z
125125 M,Z
HB
HB
M,Z
155155 M,Z
HB
HB
M,Z
185185 M,Z
HB
HB
M,Z
225225 M,Z
HB
HB
M,Z
275275 M,Z
M,Z
C2225
C2225
50V 100V
100V
50V
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KB
KC
KC
KD
KD
KD
KD
KD
KD
KC
KC
KC
KC
KC
KC
NOTE: For non-standard capacitance values or voltages, contact your local KEMET sales representative.
50 Volt Ceramic Chips can be used for 63 volt applications.
* EIA preferred chip sizes
See page 78 for Thickness Code Reference Chart.
76
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Ceramic Surface Mount
Z5U CAPACITANCE RANGE
(KEMET's Z5U also meets Y5V Characteristics)
CERAMIC CHIP/CAPACITORS
Tin Lead L Termination
FEATURES
KEMET’s line of Tin/Lead termination commercial MLCC surface mount capacitors are designed to meet the needs of the
commercial, high reliability, and military customer applications where Tin/Lead plating is required. KEMET’s Tin/Lead electroplating process is designed to meet a 5% minimum lead content in the termination of the component. As the bulk of the
electronics industry marches to RoHS compliance it is important that KEMET provide the Tin/Lead terminated products for
our valued high reliability and military customers.
KEMET Tin/Lead MLCC surface mount capacitors are available in standard EIA case sizes from 0402 to 2225 and standard
KEMET
Tiin/Lead
MLCC
surface
mount
capacitors
are available
in standard
EIA to
case
sizes
0402
to 2225 and
standard
capacitance
values
in X7R
and C0G
dielectrics.
Voltage
ratings range
from 6.3V
200V.
Tofrom
order
the Tin/Lead
terminations
th
capacitance
values
X7R,
X5R,
C0G
dielectrics.
Voltage
ratings
range
from
6.3V to 200V.
To order
themount
Tin/Lead
terminaindicate an “L”
in thein14
digit
of
the
part
number.
To
request
the
L
Series
termination
for
other
surface
product
lines (Open
th
tions
an “L” in
the 14etc.)
digit
part number.
For additional
and voltage
contact
the facMode,indicate
High Voltage,
Arrays,
or of
forthe
additional
dielectrics
and higherdielectrics
voltage ratings,
pleaseratings
contactplease
the factory
or local
Sales
tory or local Sales personnel.
representative.
CAPACITOR OUTLINE DRAWINGS
W
L
T
Sn/Pb PLATE
B
NICKEL PLATE
S
ELECTRODES
CONDUCTIVE METALLIZATION
DIMENSIONS—MILLIMETERS AND (INCHES)
0402*
1005
0603*
1608
0805*
2012
2.0 (.079) ± 0.2 (.008)
1.25 (.049) ± 0.2 (.008)
1206*
3216
3.2 (.126) ± 0.2 (.008)
1.6 (.063) ± 0.2 (.008)
1210*
3225
3.2 (.126) ± 0.2 (.008)
2.5 (.098) ± 0.2 (.008)
1812
4532
4.5 (.177) ± 0.3 (.012)
3.2 (.126) ± 0.3 (.012)
0.6 (.024) ±.35 (.014)
N/A
1825*
4564
4.5 (.177) ± 0.3 (.012)
6.4 (.252) ± 0.4 (.016)
0.6 (.024) ±.35 (.014)
N/A
2220
5650
5.6 (.220) ± 0.4 (.016)
5.0 (.197) ± 0.4 (.016)
0.6 (.024) ±.35 (.014)
N/A
2225
5664
5.6 (.220) ± 0.4 (.016)
6.3 (.248) ± 0.4 (.016)
0.6 (.024) ±.35 (.014)
N/A
L#
LENGTH
W#
WIDTH
B
BANDWIDTH
1.0 (.04) ± .05(.002)
0.5 (.02) ± .05 (.002)
1.6 (.063) ± 0.15 (.006)
0.8 (.032) ± 0.15 (.006)
See page 78
for thickness
dimensions.
S
MIN. SEPARATION
MOUNTING
TECHNIQUE
0.20 (0.008)-0.40 (0.016)
0.3 (.012)
Solder Reflow
0.35 (.014) ±0.15 (.006)
0.7 (.028)
0.5 (.02) ±.25 (.010)
0.75 (.030)
0.5 (.02) ±.25 (.010)
N/A
0.5 (.02) ±.25 (.010)
N/A
Solder Wave †
or
Solder Reflow
Solder
Reflow
* Note: Indicates EIA Preferred Case Sizes (Tightened tolerances apply for 0402, 0603, and 0805 packaged in bulk cassette, see page 96.)
† For extended value 1210 case size – solder reflow only.
CAPACITOR ORDERING INFORMATION (Standard Chips - For
Military see page 87)
C 0805 C 103 K 5 R A L*
CERAMIC
SIZE CODE
SPECIFICATION
C - Standard
CAPACITANCE CODE
Expressed in Picofarads (pF)
First two digits represent significant figures.
Third digit specifies number of zeros. (Use 9
for 1.0 through 9.9pF. Use 8 for 0.5 through 0.99pF)
(Example: 2.2pF = 229 or 0.50 pF = 508)
CAPACITANCE TOLERANCE
B – ±0.10pF J – ±5%
C – ±0.25pF K – ±10%
D – ±0.5pF
M – ±20%
F – ±1%
G – ±2%
* Part Number Example: C0805C103K5RAL
END METALLIZATION
L - SnPb plated nickel barrier
(SnPb 5% minimum)
FAILURE RATE LEVEL
A- Not Applicable
TEMPERATURE CHARACTERISTIC
Designated by Capacitance
Change Over Temperature Range
G – C0G (NP0) (±30 PPM/°C)
R – X7R (±15%) (-55°C + 125°C)
P – X5R (±15%) (-55°C + 85°C)
VOLTAGE
1 - 100V
3 - 25V
2 - 200V
4 - 16V
5 - 50V
8 - 10V
9 - 6.3V
(14 digits - no spaces)
Refer to pages 73-76 for NP0/C0G, X7R and X5R dielectric capacitance ranges available.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
77
Ceramic Surface Mount
EIA
SIZE CODE
METRIC
SIZE CODE
(Ref only)
CERAMIC CHIP CAPACITORS
Thickness Code Reference Chart
Packaging Quantity Based on Finished Chip Thickness Specifications
Thickness
Code
Chip
Size
AA
BB
CB
CC
CD
DB
DC
DD
DE
DF
DG
DH
DJ
DK
EB
EC
ED
EE
EF
EG
EH
EJ
EK
EL
EM
EN
FB
FC
FD
FE
FF
FG
FH
FJ
FK
FL
FM
FN
FO
FP
FQ
FR
FS
GB
GC
GD
GE
GF
GG
GH
GJ
GK
GL
GM
GN
HB
HC
HD
HE
HF
JB
JC
JD
JE
JF
KB
KC
KD
KE
0201
0402
0603
0603
0603
0805
0805
0805
0805
0805
0805
0805
0805
0805
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1206
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1210
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1812
1825
1825
1825
1825
1825
2220
2220
2220
2220
2220
2225
2225
2225
2225
Chip Thickness
Range (mm)
.30 ± .03
.50 ± .05
.80 ± .07
.80 ± .10
.80 ± .15
.60 ± .10
.78 ± .10
.90 ± .10
1.00 ± .10
1.10 ± .10
1.25 ± .15
1.25 ± .20
1.25 ± .20
1.25 ± .15
.78 ± .10
.90 ± .10
1.00 ± .10
1.10 ± .10
1.20 ± .15
1.60 ± .15
1.60 ± .20
1.70 ± .20
.80 ± .10
1.15 ± .15
1.25 ± .15
0.95 ± .10
.78 ± .10
.90 ± .10
.95 ± .10
1.00 ± .10
1.10 ± .10
1.25 ± .15
1.55 ± .15
1.85 ± .20
2.10 ± .20
1.40 ± .15
1.70 ± .20
1.85 ± .20
1.50 ± .20
1.60 ± .20
2.5 ± .20
2.25 ± .20
2.50 ± .20
1.00 ± .10
1.10 ± .10
1.25 ± .15
1.30 ± .10
1.50 ± .10
1.55 ± .10
1.40 ± .15
1.70 ± .15
1.60 ± .20
1.90 ± .20
2.00 ± .20
1.70 ± .20
1.10 ± .15
1.15 ± .15
1.30 ± .15
1.40 ± .15
1.50 ± .15
1.00 ± .15
1.10 ± .15
1.30 ± .15
1.40 ± .15
1.50 ± .15
1.00 ± .15
1.10 ± .15
1.30 ± .15
1.40 ± .15
Qty per Reel
7" Plastic
Qty per Reel
13" Plastic
Qty per Reel
7" Paper
Qty per Reel
13" Paper
Qty per Bulk
Cassette
N/A
N/A
N/A
N/A
N/A
N/A
4,000
4,000
2,500
2,500
2,500
2,500
3,000
3,000
4,000
4,000
2,500
2,500
2,500
2,000
2,000
2,000
2,000
2,000
2,500
4,000
4,000
4,000
4,000
2,500
2,500
2,500
2,000
2,000
2,000
2,000
2,000
2,000
2,000
2,000
1,500
2,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
1,000
N/A
N/A
N/A
N/A
N/A
N/A
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
8,000
8,000
8,000
8,000
8,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
8,000
8,000
8,000
8,000
8,000
8,000
8,000
8,000
8,000
8,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
15,000
10,000
4,000
4,000
4,000
N/A
4,000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
4,000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
50,000
10,000
10,000
10,000
N/A
10,000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
10,000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
50,000
15,000
N/A
N/A
10,000
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
This chart refers to ceramic chip thickness codes on pages 73-76.
78
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC OPEN MODE CAPACITORS
FEATURES
KEMET’s Open Mode Ceramic Surface Mount Capacitor is designed to significantly minimize the probability
of a low IR or Short Circuit Condition when forced to failure in a board flex situation. This reduces the potential for causing catastrophic failures. This product is RoHS Compliant.
Applications:
• Input side filtering (power plane/bus)
• High current applications (battery line)
• Circuits that cannot be fused to open when
short circuits occur due to flex cracks
Markets:
• Automotive
- All applications connected directly to the battery
- Conversion to 42V power system
• Power Conversion
- Raw power input side filtering
OUTLINE DRAWING
TIN PLATE
L
W
B
T
NICKEL PLATE
S
ELECTRODES
CONDUCTIVE
METALLIZATION
TABLE 1 - DIMENSIONS - MILLIMETERS (INCHES)
Metric
EIAEIA
Size
Metric
Size
L - Length
W - Width
Size
Code Code
Code
Size
Code
L - Length
W - Width
2012
0805 2.002.0
(.079)
.20(.008)
(.008) 1.25
1.25
(.049)±±.20
0.2 (.008)
(.008)
2012
0805
(.079)
± ±.20
(.049)
3216
1206
(.126) ± .20 (.008)
1.6 (.063) ± 0.2 (.008)
3216
1206
3.203.2
(.126)
± .20 (.008) 1.60
(.063) ± .20 (.008)
3225
1210
3.2 (.126) ± .20 (.008)
2.5 (.098) ± 0.2 (.008)
3225
1210
3.204.5
(.126)
± .20 (.008) 2.50
(.098) ± .20 (.008)
4532
1812
(.177) ± 0.3 (.012)
3.2 (.126) ± 0.3 (.012)
B - Bandwidth
B - Bandwidth
0.50
(.02)±± .25
.25 (.010)
(.010)
0.50
(.02)
0.50 (.02) ± .25 (.010)
0.50
(.02) ± .25 (.010)
0.50 (.02) ± .25 (.010)
0.50
(.02) ± .25 (.010)
0.60 (.024) ± .35 (.014)
Separation
Separation
0.75 (.030)
(.030)
0.75
N/A
N/A
N/A
N/A
N/A
Note: For thickness dimensions, see Table 2.
C
1812
F
105
K
1
R
A
Ceramic Surface Mount
CAPACITOR ORDERING INFORMATION
C
Style
C - Ceramic
Size Code
0805, 1206, 1210, 1812
End Metallization
C = Standard
Specification
F - Open-Mode
Capacitance Code, pF
First two digits represent significant figures.
Third digit specifies number of zeros. 100 pF = 101.
(Use “9” for 1.0 through 9.9 pF)
(Use “8” for 0.1 through .99 pF)
Failure Rate Level
A = Not Applicable
Temperature Characteristic
Designated by Capacitance
Change over Temperature Range
R – X7R (±15%) (-55°C +125°C)
Capacitance Tolerance
K = ±10%
M = ±20%
2 = 200V
1 = 100V
Voltage
5 = 50V
3 = 25V
4 = 16V
OPEN-MODE INTERNAL DESIGN
The open-mode dimension (OM)
exceeds the termination bandwidth
dimensions: OM >BW
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
79
CERAMIC OPEN MODE CAPACITORS
TABLE 2
X7R DIELECTRIC CAPACITANCE RANGE AND THICKNESS TARGETS (mm)
0805
16V
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DG
DD
DG
DD
DG
DG
DG
DG
DG
DG
DG
DG
DE
25V
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DG
DD
DG
DD
DG
DG
DG
DG
DD
DG
DG
DD
DG
DG
DE
DG
50V
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DG
DG
DD
DG
DG
DG
DG
1206
100V
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DG
DD
DG
DG
DG
DG
DG
DG
DE
DG
DE
DG
DG
DG
DG
DG
200V 16V
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DD
DG
DD
DG
DG
DG
25V
50V
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EG
EC
EG
EC
EG
EG
EG
EG
EG
EG
EG
EG
EG
EG
EG
EG
EC
EH
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EG
EC
EG
EC
EG
EG
EG
EG
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EG
EC
EC
EC
EC
EH
EH
EC
EH
EH
1210
100V
EC
EC
EC
EC
EC
EC
EC
EC
EC
EC
EG
EC
EG
EC
ED
EG
EG
EG
ED
200V
EC
EC
EC
EC
EC
EC
EC
EC
EC
EG
EC
EG
EG
EG
EG
EG
EG
EG
EG
EG
EC
EH
16V
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FG
FD
FH
FD
FH
FD
FJ
FG
FG
FH
FH
FJ
FG
25V
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FG
FD
FG
FD
FH
FD
FG
FG
FH
50V
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FD
FG
FD
FG
FD
FG
FH
FG
FJ
FG
FJ
FG
FH
FJ
FJ
FM
1812
100V
FD
FD
FD
FD
FD
FD
FG
FD
FG
FD
FH
FG
FH
FG
FJ
FH
FR
FR
FH
FJ
FQ
FR
FR
200V
FD
FD
FG
FD
FG
FD
FH
FG
FH
FG
FJ
FH
FH
FJ
FQ
25V
50V
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GD
GB
GD
GB
GN
GB
GD
GD
GN
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GD
GB
GD
GB
GN
GB
GD
GD
GN
100V
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GC
GB
GD
GF
GB
GK
GC
GM
GD
GF
GK
GM
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GB
GC
GB
GF
GB
GK
GC
GL
GF
GK
GL
FM
FQ
FM
FM
THICKNESS AND PACKAGING INFORMATION
80
200V
Thickness
Code
Series
Dimension
7" Reel Qty.
13" Reel Qty.
DD
DE
DG
EC
EG
EH
FD
FG
FH
FJ
FM
FR
FQ
GB
GC
GD
GF
GK
GL
GM
GN
0805
0805
0805
1206
1206
1206
1210
1210
1210
1210
1210
1210
1210
1812
1812
1812
1812
1812
1812
1812
1812
.90 ± .10
1.00 ± .10
1.25 ± .15
.90 ± .10
1.60 ± .15
1.60 ± .20
.95 ± .10
1.25 ± .15
1.55 ± .15
1.85 ± .20
1.70 ± .20
2.25 ± .20
2.5 ± .20
1.0 ± .10
1.1 ± .10
1.25 ± .15
1.50 ± .15
1.60 ± .20
1.90 ± .20
2.00 ± .20
1.70 ± .20
4000
2500
2500
4000
2000
2000
4000
2500
2000
2000
2000
2000
1500
1000
1000
1000
1000
1000
1000
1000
1000
10000
10000
10000
10000
8000
8000
10000
10000
8000
8000
8000
8000
8000
4000
4000
4000
4000
4000
4000
4000
4000
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Ceramic Surface Mount
Cap
Code
102
122
122
152
152
182
182
222
222
272
272
332
332
392
392
472
472
562
562
682
822
682
103
822
123
103
153
123
183
153
223
183
273
223
333
273
393
333
473
393
563
473
683
823
563
104
683
124
823
154
104
184
124
224
154
274
184
334
224
394
274
474
334
564
684
394
824
474
105
564
125
684
155
824
185
105
225
125
475
155
685
185
225
475
CERAMIC CHIP / HIGH VOLTAGE
KEMET's High Voltage Surface Mount Capacitors are designed to withstand high voltage applications. They
offer high capacitance with low leakage current and low ESR at high frequency. The capacitors have pure tin
(Sn) plated external electrodes for good solderability. X7R dielectrics are not designed for AC line filtering
applications. An insulating coating may be required to prevent surface arcing. These components are RoHS
compliant.
MARKETS
Markets
APPLICATIONS
Applications
• Switch Mode Power Supply
• Input Filter
• Resonators
• Tank Circuit
• Snubber Circuit
• Output Filter
• High Voltage Coupling
• High Voltage DC Blocking
• Lighting Ballast
• Voltage Multiplier Circuits
• Coupling Capacitor/CUK
• Power Supply
• High Voltage Power Supply
• DC-DC Converter
• LCD Fluorescent Backlight Ballast
• HID Lighting
• Telecommunications Equipment
• Industrial Equipment/Control
• Medical Equipment/Control
• Computer (LAN/WAN Interface)
• Analog and Digital Modems
• Automotive
OUTLINE
Outline DRAWING
Drawing
W
TIN PLATE
L
B
T
NICKEL PLATE
ELECTRODES
CONDUCTIVE
METALLIZATION
Ceramic Surface Mount
S
TABLE 1 - DIMENSIONS - MILLIMETERS (in.)
Metric
Code
EIA Size
Code
L - Length
W - Width
B - Bandwidth
Band
Separation
2012
0805
2.0 (0.079)
± 0.2 (0.008)
1.2 (0.049)
± 0.2 (0.008)
0.5 (0.02
±0.25 (0.010)
0.75 (0.030)
3216
1206
3.2 (0.126)
± 0.2 (0.008)
1.6 (0.063)
± 0.2 (0.008)
0.5 (0.02)
± 0.25 (0.010)
N/A
3225
1210
3.2 (0.126)
± 0.2 (0.008)
2.5 (0.098)
± 0.2 (0.008)
0.5 (0.02)
± 0.25 (0.010)
N/A
4520
1808
4.5 (0.177)
± 0.3 (0.012)
2.0 (0.079
± 0.2 (0.008)
0.6 (0.024)
± 0.35 (0.014)
N/A
4532
1812
4.5 (0.177)
± 0.3 (0.012)
3.2 (0.126)
± 0.3 (0.012)
0.6 (0.024)
± 0.35 (0.014)
N/A
4564
1825
4.5 (0.177)
± 0.3 (0.012)
6.4 (0.250)
± 0.4 (0.016)
0.6 (0.024)
± 0.35 (0.014)
N/A
5650
2220
5.6 (0.224)
± 0.4 (0.016)
5.0 (0.197)
± 0.4 (0.016)
0.6 (0.024)
± 0.35 (0.014)
N/A
5664
2225
5.6 (0.224)
± 0.4 (0.016)
6.4 (0.250)
± 0.4 (0.016)
0.6 (0.024)
± 0.35 (0.014)
N/A
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
81
CERAMIC CHIP / HIGH VOLTAGE
C0G DIELECTRIC CAPACITANCE VALUES AND THICKNESS TARGETS (in.)
C,D
C,D
K,M
C,D
J,K,M
C,D
J,K,M
C,D
J,K,M
C,D
J,K,M
C,D
J,K,M
C,D G,J,K,M
C,D G,J,K,M
C,D G,J,K,M
C,D G,J,K,M
C,D G,J,K,M
C,D G,J,K,M
D,F,G,J,K,M
D,F,G,J,K,M
D,F,G,J,K,M
D,F,G,J,K,M
D,F,G,J,K,M
D,F,G,J,K,M
D,F,G,J,K,M
D,F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
F,G,J,K,M
g
0.065
0.065
0.065
0.101
0.101
0.101
0.101
0.080
0.080
0.080
0.080
0.080
0.080
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
1500
2000
500
1000
1500
2000
500
1000
1500
2000
2500
3000
500
1000
1500
2000
2500
3000
500
1000
1500
2000
2500
3000
500
1000
1500
2000
2500
3000
500
1000
1500
2000
2500
3000
2225
0.065
2220
1000
1825
0.050
1812
500
1808
0.050
Cap Code/
Voltage
1210
109-249
279-519
569-919
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
161
181
201
221
241
271
301
331
361
391
431
471
511
561
621
681
751
821
911
102
112
122
132
152
162
182
202
222
242
272
302
332
362
392
432
472
512
562
622
682
752
822
912
103
* Contact KEMET Sales Representative for C, D, F & G Capacitance Tolerance availability.
Note: Actual thickness dimensions may be less than stated maximum. Check the KEMET website, www.kemet.com, for additional values and chip sizes available.
82
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Ceramic Surface Mount
1.0-2.4
2.7-5.1
5.6-9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
9100
10,000
*
Max
Thickness
(in)
1206
500
Cap
pF
Capacitance
Tolerance
0805
1000
p
Series
CERAMIC CHIP / HIGH VOLTAGE
X7R DIELECTRIC CAPACITANCE VALUES AND THICKNESS TARGETS (in.)
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.080
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
0.067
1000
1500
2000
500
1000
1500
2000
2500
3000
500
1000
1500
2000
2500
3000
500
1000
1500
2000
2500
3000
500
1000
1500
2000
2500
3000
500
1000
1500
2000
2500
3000
2225
0.065
2220
500
1825
0.065
1812
2000
1808
0.065
0.065
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
101
111
121
131
151
181
221
271
331
391
471
561
681
821
102
122
152
182
202
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
623
683
823
104
124
154
184
224
Ceramic Surface Mount
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
g
1210
1500
0.050
500
Cap Code/
Voltage
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
180
220
270
330
390
470
560
680
820
1000
1200
1500
1800
2000
2200
2700
3300
3900
4700
5600
6800
8200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
62,000
68,000
82,000
100,000
120,000
150,000
180,000
220,000
1206
1000
Max
Thickness
(in)
0.050
Capacitance
Tolerance
500
Cap
pF
0805
1000
p
Series
Note: Actual thickness dimensions may be less than stated maximum.
Check the KEMET website, www.kemet.com, for additional values and chip sizes available.
KEMET HIGH VOLTAGE SURFACE MOUNT CHIP (VOLTAGE CODES C,D,F,G,H, and Z)
THICKNESS AND REELING QUANTITIES
Chip size
EIA
0805
1206
1210
1808
1812/1813
1825
2220
2225
Metric
2012
3216
3225
4520
4532
4564
5650
5664
Max.
Thickness (in)
0.055
0.065
0.101
0.080
0.067
0.067
0.067
0.067
Max.
Thickness (mm)
1.27
1.65
2.57
2.03
1.70
1.70
1.70
1.70
Tape Width
(mm)
8
8
8
12
12
12
12
12
Qty per Reel Qty per Reel
7" Plastic
13" Plastic
2,500
10,000
2,000
8,000
2,000
8,000
1,000
4,000
1,000
4,000
1,000
4,000
1,000
4,000
1,000
4,000
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
83
CERAMIC CHIP / HIGH VOLTAGE
CAPACITOR
ORDERING
INFORMATION
Capacitor
Ordering Information
C
0805
C
102
K
C
R
A
C
Style
Style
C - Ceramic
Chip
ChipSize
Size
0805; 1206; 1210; 1808;
1812; 1825; 2220; 2225
End Metallization
Metallization
C = Standard
Failure
Failure Rate Level
A = Not Applicable
Specification
Specification
C - Standard
CapacitanceCode,
Code,pF
pF
Capacitance
First two digits represent significant figures.
Third digit specifies number of zeros. 100 pF = 101.
(Use “9” for 1.0 through 9.9 pF)
(Use “8” for 0.1 through .99 pF)
Temperature Characteristic
Characteristic
Designated by Capacitance
Change over Temperature Range
G – (C0G) (±30ppm/C) (-55°C +125°C)
R – X7R (±15%) (-55°C +125°C)
Capacitance
CapacitanceTolerance
Tolerance
C = ±0.25pF*
J = ±5%
D = ±0.5pF*
K = ±10%
F = ±1%*
M = ±20%
G = ±2%*
* Contact KEMET Sales for availability.
C = 500V
D = 1000V
F = 1500V
Voltage
G = 2000V
Z = 2500V
H = 3000V
ELECTRICAL
Electrical PARAMETERS
Parameters
Property
Specification
C0G: 1 pF to 0.010 µF
X7R: 10 pF
pf to 0.22 µF
25°C, 1.0 ± 0.2 Vrms, 1 kHz (1 MHz for ≤ 1000 pF (C0G only)
C0G: C*, D*, F*, G*, J, K, M
* Contact KEMET Sales for availability.
X7R: J, K, M
C0G: 0.1% Max
X7R: 2.5% Max
Capacitance
Cap Tolerance
DF
Voltage Ratings
500 V, 1000 V, 1500 V, 2000 V, 2500 V, 3000 V
Operating Temperature Range
From -55ºC
-55C to
to +125C
+125ºC
25ºC IR @ 500V
100 GΩ or 1000 MΩ-µF, whichever is less
125ºC IR @ 500V
10 GΩ or 100 MΩ-µF, whichever is less
-55ºC TCC
+125ºC TCC
X7R: + 15%
C0G: + 30 ppm / ºC
150% of Rated Voltage for Rated Voltage <1000 V
120% of Rated Voltage for Rated Voltage >=1000V
Dielectric Strength
Ripple Current
Consult KEMET Sales Representative
MARKING
Marking
These chips are supplied unmarked. If required, they can be supplied LASER-marked at an extra cost.
Details on the marking format is located on page 97.
Packaging
PACKAGING
KEMET High Voltage Surface Mount MLCC are available packaged in tape and reel configuration, or bulk
bag as outlined on page 83. Please consult factory for waffle packaging options.
SOLDERING
PROCESS
Soldering Process
The 0805 and 1206 case sizes are suitable for either reflow or wave soldering processes. Sizes 1210 and
larger should be limited to reflow soldering only. All sizes incorporate the standard KEMET barrier layer of
pure nickel with an overplating of pure tin (Sn) for excellent solderability and resistance to solder leaching of
the termination.
RecommendedSOLDER
Solder Pad
RECOMMENDED
PADDimensions
DIMENSIONS
Chip Size
0805
1206
1210
1808
1812
1825
2220
2225
84
T (Total Length)
S (Separation
mm
3.30
4.50
4.50
5.90
5.90
5.90
7.00
7.00
mm
0.70
1.50
1.50
2.30
2.30
2.30
3.30
3.30
in.
0.130
0.177
0.177
0.232
0.232
0.232
0.276
0.276
in.
0.028
0.059
0.059
0.091
0.091
0.091
0.130
0.130
W (Pad Width)
mm
1.60
2.00
2.90
2.40
3.70
6.90
5.50
6.80
in.
0.063
0.079
0.114
0.094
0.146
0.272
0.217
0.268
L (Pad Length)
mm
1.30
1.50
1.50
1.80
1.80
1.80
1.85
1.85
in.
0.051
0.059
0.059
0.071
0.071
0.071
0.073
0.073
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CAPACITOR ARRAY
FEATURES
•
•
Four individual capacitors inside
one 1206 monolithic structure
Saves board and inventory space
One placement instead of four - less costly
•
•
•
Easier to handle and solder than 4 smaller chips
Tape and reel per EIA 481-1
RoHS Compliant
CAPACITOR OUTLINE DRAWING
T
L
CL
P
BW
BW1
P/2
Ref
W
TABLE 1
EIA DIMENSIONS – MILLIMETERS (INCHES)
Size
Code
Length
L
Width
W
Thickness
T (max.)
1632
3.2 (0.126)
± 0.2 (0.008)
1.6 (.063)
± 0.2 (.008)
0.7 - 1.35
(0.027 - 0.053)
Bandwidth
BW
Bandwidth
BW1
Pitch
P
0.40 (0.016)
0.1 - 0.5
0.8 (0.031)
± 0.2 (0.008) (0.004 - 0.020) ± 0.1 (0.004)
Notes:
1. Metric is controlling - English for reference only.
2. Pitch (P) tolerances are non-cumulative along the package.
3. Thickness (T) depends on capacitance.
Ceramic Surface Mount
•
CERAMIC ARRAY ORDERING INFORMATION
C
1632
C
103
CERAMIC
EIA SIZE CODE
Ceramic chip array
SPECIFICATION
C - Standard
CAPACITANCE CODE
Expressed in Picofarads (pF)
First two digits represent significant figures.
Third digit specifies number of zeros. (Use 9
for 1.0 thru 9.9pF. (Example: 2.2pF = 229
CAPACITANCE TOLERANCE
K – ±10%: M – ±20% Standard Tolerances
Contact factory for any special requirements.
K
5
R
A
C
END METALLIZATION
C-Standard
(Tin-plated nickel barrier)
FAILURE RATE LEVEL
A- Not Applicable
TEMPERATURE CHARACTERISTIC
Designated by Capacitance
Change Over Temperature Range
G – C0G (NP0) (±30 PPM/°C)
R – X7R (±15%)
VOLTAGE
5 = 50v; 3 = 25v; 4 = 16v; 8=10v
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
85
CERAMIC CHIP ARRAY
1632 CERAMIC ARRAY
LAND PATTERN LAYOUT
TABLE 2A
C0G DIELECTRIC – CAPACITANCE RANGE
Capacitance
Values (pF)
KEMET Part Number
Capacitance
Tolerance
10V
16V
25V
50V
100V
200V
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
C1632C100(1)(2)GAC
C1632C120(1)(2)GAC
C1632C150(1)(2)GAC
C1632C180(1)(2)GAC
C1632C220(1)(2)GAC
C1632C270(1)(2)GAC
C1632C330(1)(2)GAC
C1632C390(1)(2)GAC
C1632C470(1)(2)GAC
C1632C560(1)(2)GAC
C1632C680(1)(2)GAC
C1632C820(1)(2)GAC
C1632C101(1)(2)GAC
C1632C121(1)(2)GAC
C1632C151(1)(2)GAC
C1632C181(1)(2)GAC
C1632C221(1)(2)GAC
C1632C271(1)(2)GAC
C1632C331(1)(2)GAC
C1632C391(1)(2)GAC
C1632C471(1)(2)GAC
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
221
271
331
391
471
100
120
150
180
220
270
330
390
470
560
680
820
101
121
151
181
100
120
150
180
220
270
330
390
470
560
680
820
(1) To complete the KEMET part number, insert the alpha code for the tolerance desired.
K = ±10% and M = ±20% – standard tolerance. Contact factory for any special requirements.
(2) To complete the KEMET part number, insert appropriate number for voltage desired:
"5" = 50 volts, "3" = 25 volts, "4" = 16 volts, and "8" = 10 volts.
6 Places
P
X
G
8 Places
Z
C
Y
Additional pad dimension information is available in
KEMET Technical Bulletin F-2100.
LAND PATTERN DIMENSIONS - CERAMIC CHIP
CAPACITOR ARRAYS - MM
Reflow Solder
Dimension
Z
3216
2.80
TABLE 2B
X7R DIELECTRIC – CAPACITANCE RANGE
Capacitance
Values (pF)
KEMET Part Number
Capacitance
Tolerance
10V
16V
330
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
47,000
56,000
68,000
82,000
100,000
C1632C331(1)(2)RAC
C1632C391(1)(2)RAC
C1632C471(1)(2)RAC
C1632C561(1)(2)RAC
C1632C681(1)(2)RAC
C1632C821(1)(2)RAC
C1632C102(1)(2)RAC
C1632C122(1)(2)RAC
C1632C152(1)(2)RAC
C1632C182(1)(2)RAC
C1632C222(1)(2)RAC
C1632C272(1)(2)RAC
C1632C332(1)(2)RAC
C1632C392(1)(2)RAC
C1632C472(1)(2)RAC
C1632C562(1)(2)RAC
C1632C682(1)(2)RAC
C1632C822(1)(2)RAC
C1632C103(1)(2)RAC
C1632C123(1)(2)RAC
C1632C153(1)(2)RAC
C1632C183(1)(2)RAC
C1632C223(1)(2)RAC
C1632C273(1)(2)RAC
C1632C333(1)(2)RAC
C1632C393(1)(2)RAC
C1632C473(1)(2)RAC
C1632C563(1)(2)RAC
C1632C683(1)(2)RAC
C1632C823(1)(2)RAC
C1632C104(1)(2)RAC
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
K,M
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
273
333
393
473
563
683
823
104
25V
50V
100V 200V
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
562
682
822
103
123
153
183
223
331
391
471
561
681
821
102
122
152
182
222
272
332
392
472
331
391
471
561
G
0.40
X Y(ref) C(ref) P(ref)
0.80
0.52 1.20 1.60
Calculation Formula
Z = Lmin + 2Jt + Tt
G = Smax - 2Jh -Th
X = Wmin + 2Js + Ts
Tt, Th, Ts = Combined
tolerances
(1) To complete the KEMET part number, insert the alpha code for the tolerance desired:
K = ±10% and M = ±20% – standard tolerances. Contact factory for any special requirements.
(2) To complete the KEMET part number, insert appropriate number for voltage desired:
"5" = 50 volts, "3" = 25 volts, "4" = 16 volts, and "8" = 10 volts.
86
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP/MIL-PRF-55681
CAPACITOR OUTLINE DRAWINGS
CHIP DIMENSIONS
“SOLDERGUARD I” *
SOLDER
L
W
“SOLDERGUARD II”
T
TINNED
BW
NICKEL
ELECTRODES
SILVER
METALLIZATION
NICKEL
ELECTRODES
Military Designation - “S” or “U”
KEMET Designation - “H”
SILVER
METALLIZATION
Military Designation - “W” or “Y”
KEMET Designation - “C”
DIMENSIONS—MILLIMETERS AND (INCHES)
STYLE
KEMET
SIZE
CODE
CDR01
CDR02
CDR03
CDR04
C0805
C1805
C1808
C1812
CDR05
C1825
CDR06
CDR31
CDR32
CDR33
CDR34
CDR35
C2225
C0805
C1206
C1210
C1812
C1825
T
L
W
MIN.
MAX.
BW
2.03 ±.38 (.080 ±.015)
4.57 ±.38 (.180 ±.015)
4.57 ±.38 (.180 ±.015)
4.57 ±.38 (.180 ±.015)
+.51
+.020
4.57
.180
–.38
–.015
5.72 ±.51 (.225 ±.020)
2.00 ±.20 (.078 ±.008)
3.20 ±.20 (.125 ±.008)
3.20 ±.25 (.125 ±.010)
4.50 ±.25 (.176 ±.010)
4.50 ±.30 (.176 ±.012)
1.27 ±.38 (.050 ±.015)
1.27 ±.38 (.050 ±.015)
2.03 ±.38 (.080 ±.015)
3.18 ±.38 (.125 ±.015)
+.51
+.020
6.35
.250
–.38
–.015
6.35 ±.51 (.250 ±.020)
1.25 ±.20 (.049 ±.008)
1.60 ±.20 (.062 ±.008)
2.50 ±.25 (.098 ±.010)
3.20 ±.25 (.125 ±.010)
6.40 ±.30 (.250 ±.012)
.56 (.022)
.56 (.022)
.56 (.022)
.56 (.022)
1.40 (.055)
1.40 (.055)
2.03 (.080)
2.03 (.080)
.51 ± 0.25 (.020 ±.010)
.51 ± 0.25 (.020 ±.010)
.51 ± 0.25 (.020 ±.010)
.51 ± 0.25 (.020 ±.010)
.51 (.020)
2.03 (.080)
.51 ± 0.25 (.020 ±.010)
.51 (.020)
2.03 (.080)
1.30 (.051)
1.30 (.051)
1.50 (.059)
1.50 (.059)
1.50 (.059)
.51 ± 0.25 (.020 ±.010)
.50 ± 0.20 (.020 ±.008)
.50 ± 0.20 (.020 ±.008)
.50 ± 0.25 (.020 ±.010)
.50 ± 0.25 (.020 ±.010)
.50 ± 0.30 (.020 ±.012)
(
)
(
)
Note: For Solderguard I (MIL-C55681 “S” or “U” Endmets), the length, width and thickness positive tolerances (including bandwidth) cited above are allowed to increase by the following
amounts:
Width/Thickness
Length
CDR01
0.51MM (.020)
0.38MM (.015)
CDR02-06
0.64MM (.025)
0.38MM (.015)
CDR31-35
0.60MM (.023)
0.30MM (.012)
MIL-PRF-55681 PART NUMBER ORDERING INFORMATION
B P
101 B K
S M
STYLE & SIZE CODE
FAILURE RATE LEVEL (%/1000 hrs.)
STYLE
C — Ceramic
D — Dielectric, Fixed Chip
R — Established Reliability
M — 1.0
P — 0.1
R — 0.01
S — 0.001
Ceramic Surface Mount
CDR01
TERMINATION FINISH
S — Solder Coated, Final
(SolderGuard I)
U — Base Metalization—
Barrier Metal—Solder
Coated (SolderGuard I)
RATED TEMPERATURE
–55°C to +125°C
DIELECTRICS
P —± 30 PPM/°C—WITH OR WITHOUT VOLTAGE
X —± 15%—without voltage
+ 15%, –25%—with voltage
W — Base Metalization—
Barrier Metal—Tinned
Tin or (Tin/Lead Alloy)
SolderGuard II
Y — Base Metalization
Barrier Metal—Tinned
(100% Tin) Solderguard II
CAPACITANCE TOLERANCE
CAPACITANCE
Expressed in picofarads (pF).
First 2 digits represent significant figures and the last digit specifies the number of zeros to follow.
(Use 9 for 1.0 through 9.9pF. Example: 2.2pF = 229)
B
C
D
F
±.1 pF ±.25 pF ±.5 pF ±1%
J
±5%
K
M
±10% ±20%
RATED VOLTAGE
A — 50; B — 100
KEMET/MIL-PRF-55681 PART NUMBER EQUIVALENTS
C 0805
P 101 K
1 G M C*
END METALIZATION
CERAMIC
C — SolderGuard II (100% Sn) (Military equiv: Y, W)
H — SolderGuard I (Sn60) (Military equiv: S, U)
SIZE CODE
See Table Above
FAILURE RATE (%/1,000 hrs.)
SPECIFICATION
M — 1.0
P — 0.1
P -MIL-PRF-55681 = CDR01-CDR06
N-MIL-PRF-55681 = CDR31-CDR35
R — 0.01
S — 0.001
VOLTAGE TEMPERATURE CHARACTERISTIC
CAPACITANCE CODE
Designated by Capacitance
Change Over Temperature Range
G — BP (C0G/NP0) (±30 PPM/°C)
X — BX (±15% Without Voltage
+15% -25% With Voltage)
Expressed in picofarads (pF).
First two digits represent significant figures.
Third digit specifies number of zeros. (Use 9
for 1.0 thru 9.9 pF. Example: 2.2 pF –229)
VOLTAGE
CAPACITANCE TOLERANCE
1 — 100V, 5 — 50V
B
C
D
F
±.1 pF ±.25 pF ±.5 pF ±1%
J
K
M
±5% ±10% ±20%
* Part Number Example: C0805P101K1GMC
(14 digits - no spaces)
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
87
CERAMIC CHIP/MIL-PRF-55681
Established Reliability
RATINGS & PART NUMBER REFERENCE
BP
BX
BX
BP
BX
BX
100 Volt — C0805 SIZE (MILITARY CDR01)
10 J,K C0805P100(3)1G(4)C CDR01BP100B(3)W(4)
12
J C0805P120J1G(4)C CDR01BP120BJW(4)
15 J,K C0805P150(3)1G(4)C CDR01BP150B(3)W(4)
18
J C0805P180J1G(4)C CDR01BP180BJW(4)
22 J,K C0805P220(3)1G(4)C CDR01BP220B(3)W(4)
27
J C0805P270J1G(4)C CDR01BP270BJW(4)
33 J,K C0805P330(3)1G(4)C CDR01BP330B(3)W(4)
39
J C0805P390J1G(4)C CDR01BP390BJW(4)
47 J,K C0805P470(3)1G(4)C CDR01BP470B(3)W(4)
56
J C0805P560J1G(4)C CDR01BP560BJW(4)
68 J,K C0805P680(3)1G(4)C CDR01BP680B(3)W(4)
82
J C0805P820J1G(4)C CDR01BP820BJW(4)
100 J,K C0805P101(3)1G(4)C CDR01BP101B(3)W(4)
120 J,K C0805P121(3)1(2)(4)C CDR01B(1)121B(3)W(4)
150 J,K C0805P151(3)1(2)(4)C CDR01B(1)151B(3)W(4)
180 J,K C0805P181(3)1(2)(4)C CDR01B(1)181B(3)W(4)
220 K,M C0805P221(3)1X(4)C CDR01BX221B(3)W(4)
270
K C0805P271K1X(4)C CDR01BX271BKW(4)
330 K,M C0805P331(3)1X(4)C CDR01BX331B(3)W(4)
390
K C0805P391K1X(4)C CDR01BX391BKW(4)
470 K,M C0805P471(3)1X(4)C CDR01BX471B(3)W(4)
560
K C0805P561K1X(4)C CDR01BX561BKW(4)
680 K,M C0805P681(3)1X(4)C CDR01BX681B(3)W(4)
820
K C0805P821K1X(4)C CDR01BX821BKW(4)
1,000 K,M C0805P102(3)1X(4)C CDR01BX102B(3)W(4)
1,200
K C0805P122K1X(4)C CDR01BX122BKW(4)
1,500 K,M C0805P152(3)1X(4)C CDR01BX152B(3)W(4)
1,800
K C0805P182K1X(4)C CDR01BX182BKW(4)
2,200 K,M C0805P222(3)1X(4)C CDR01BX222B(3)W(4)
2,700
K C0805P272K1X(4)C CDR01BX272BKW(4)
3,300 K,M C0805P332(3)1X(4)C CDR01BX332B(3)W(4)
50 Volt — C0805 SIZE (MILITARY CDR01)
3,900
K C0805P392K5X(4)C CDR01BX392AKW(4)
4,700 K,M C0805P472(3)5X(4)C CDR01BX472A(3)W(4)
100 Volt — C1805 SIZE (MILITARY CDR02)
220 J,K C1805P221(3)1G(4)C CDR02BP221B(3)W(4)
270
J C1805P271J1G(4)C CDR02BP271BJW(4)
3,900
K C1805P392K1X(4)C CDR02BX392BKW(4)
4,700 K,M C1805P472(3)1X(4)C CDR02BX472B(3)W(4)
5,600
K C1805P562K1X(4)C CDR02BX562BKW(4)
6,800 K,M C1805P682(3)1X(4)C CDR02BX682B(3)W(4)
8,200
K C1805P822K1X(4)C CDR02BX822BKW(4)
10,000 K,M C1805P103(3)1X(4)C CDR02BX103B(3)W(4)
50 Volt — C1805 SIZE (MILITARY CDR02)
12,000
K C1805P123K5X(4)C CDR02BX123AKW(4)
15,000 K,M C1805P153(3)5X(4)C CDR02BX153A(3)W(4)
18,000
K C1805P183K5X(4)C CDR02BX183AKW(4)
22,000 K,M C1805P223(3)5X(4)C CDR02BX223A(3)W(4)
100 Volt — C1808 SIZE (MILITARY CDR03)
330 J,K C1808P331(3)1G(4)C CDR03BP331B(3)W(4)
390
J C1808P391J1G(4)C CDR03BP391BJW(4)
470 J,K C1808P471(3)1G(4)C CDR03BP471B(3)W(4)
CHARACTERISTIC
BP
MIL-PRF-55681
PART NUMBER
BX
KEMET CAPACITORS
BX
AVAIL.
TOL.
BP
CAP.
pF
BX
BP
BX
BX
BP
BX
BX
BP or
BX
BP
CHARACTERISTIC
CAP.
pF
AVAIL.
TOL.
KEMET CAPACITORS
MIL-PRF-55681
PART NUMBER
100 Volt — C1808 SIZE (MILITARY CDR03) (Cont’d)
560
J C1808P561J1G(4)C CDR03BP561BJW(4)
680 J,K C1808P681(3)1G(4)C CDR03BP681B(3)W(4)
820
J C1808P821J1G(4)C CDR03BP821BJW(4)
1,000 J,K C1808P102(3)1G(4)C CDR03BP102B(3)W(4)
12,000
K C1808P123K1X(4)C CDR03BX123BKW(4)
15,000 K,M C1808P153(3)1X(4)C CDR03BX153B(3)W(4)
18,000
K C1808P183K1X(4)C CDR03BX183BKW(4)
22,000 K,M C1808P223(3)1X(4)C CDR03BX223B(3)W(4)
27,000
K C1808P273K1X(4)C CDR03BX273BKW(4)
33,000 K,M C1808P333(3)1X(4)C CDR03BX333B(3)W(4)
50 Volt — C1808 SIZE (MILITARY CDR03)
39,000
K C1808P393K5X(4)C CDR03BX393AKW(4)
47,000 K,M C1808P473(3)5X(4)C CDR03BX473A(3)W(4)
56,000
K C1808P563K5X(4)C CDR03BX563AKW(4)
68,000 K,M C1808P683(3)5X(4)C CDR03BX683A(3)W(4)
100 Volt — C1812 SIZE (MILITARY CDR04)
1,200
J C1812P122J1G(4)C CDR04BP122BJW(4)
1,500 J,K C1812P152(3)1G(4)C CDR04BP152B(3)W(4)
1,800
J C1812P182J1G(4)C CDR04BP182BJW(4)
2,200 J,K C1812P222(3)1G(4)C CDR04BP222B(3)W(4)
2,700
J C1812P272J1G(4)C CDR04BP272BJW(4)
3,300 J,K C1812P332(3)1G(4)C CDR04BP332B(3)W(4)
39,000
K C1812P393K1X(4)C CDR04BX393BKW(4)
47,000 K,M C1812P473(3)1X(4)C CDR04BX473B(3)W(4)
56,000
K C1812P563K1X(4)C CDR04BX563BKW(4)
50 Volt — C1812 SIZE (MILITARY CDR04)
82,000
K C1812P823K5X(4)C CDR04BX823AKW(4)
100,000 K,M C1812P104(3)5X(4)C CDR04BX104A(3)W(4)
120,000
K C1812P124K5X(4)C CDR04BX124AKW(4)
150,000 K,M C1812P154(3)5X(4)C CDR04BX154A(3)W(4)
180,000
K C1812P184K5X(4)C CDR04BX184AKW(4)
100 Volt — C1825 SIZE (MILITARY CDR05)
3,900 J,K C1825P392(3)1G(4)C CDR05BP392B(3)W(4)
4,700 J,K C1825P472(3)1G(4)C CDR05BP472B(3)W(4)
5,600 J,K C1825P562(3)1G(4)C CDR05BP562B(3)W(4)
68,000 K,M C1825P683(3)1X(4)C CDR05BX683B(3)W(4)
82,000
K C1825P823K1X(4)C CDR05BX823BKW(4)
100,000 K,M C1825P104(3)1X(4)C CDR05BX104B(3)W(4)
120,000
K C1825P124K1X(4)C CDR05BX124BKW(4)
150,000 K,M C1825P154(3)1X(4)C CDR05BX154B(3)W(4)
50 Volt — C1825 SIZE (MILITARY CDR05)
220,000 K,M C1825P224(3)5X(4)C CDR05BX224A(3)W(4)
270,000
K C1825P274K5X(4)C CDR05BX274AKW(4)
330,000 K,M C1825P334(3)5X(4)C CDR05BX334A(3)W(4)
100 Volt — C2225 SIZE (MILITARY CDR06)
6,800 J,K C2225P682(3)1G(4)C CDR06BP682B(3)W(4)
8,200 J,K C2225P822(3)1G(4)C CDR06BP822B(3)W(4)
10,000 J,K C2225P103(3)1G(4)C CDR06BP103B(3)W(4)
50 Volt — C2225 SIZE (MILITARY CDR06)
390,000
K C2225P394K5X(4)C CDR06BX394AKW(4)
470,000 K,M C2225P474(3)5X(4)C CDR06BX474A(3)W(4)
(1) To complete Part Number for Dielectric, insert P or X symbol – as defined by Military specification.
(2) To complete Part Number for Dielectric, insert G or X symbol. (“G” for Military “BP,” or “X” for Military “BX.”)
(3) To complete Part Number, insert Capacitance Tolerance Symbol (when applicable) as available in MIL-PRF-55681: B – ±0.1 pF, C – ±0.25 pF,
D – ±0.5pF, F – ±1%, J – ±5%, K – ±10%, M – ±20%. NOTE: Available tolerances are listed in columns above.
(4) To complete Part Number, insert Failure Rate Symbol: M –1.0%; P –0.1%; R –0.01%; S –.001%.
Note: All MIL-PRF-55681 and KEMET Part Numbers tabulated above assume use of Solderguard II (MIL-PRF-55681 “W”; KEMET “C”) end metalization. If MIL-PRF-55681 “U” or “S” (KEMET “H”) or MIL-PRF-55681 “Y” (KEMET “C”) is required, please change designators accordingly.
88
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP/MIL-PRF-55681
Established Reliablility
RATINGS & PART NUMBER REFERENCE
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
AVAIL.
TOL.
KEMET CAPACITORS
MIL-PRF-55681
PART NUMBER
100 Volt — BP — C0805 SIZE (MILITARY CDR31)
B,C
C0805N109(3)1G(4)C
CDR31BP1R0B(3)W(4)
B,C
C0805N119(3)1G(4)C
CDR31BP1R1B(3)W(4)
B,C
C0805N129(3)1G(4)C
CDR31BP1R2B(3)W(4)
B,C
C0805N139(3)1G(4)C
CDR31BP1R3B(3)W(4)
B,C
C0805N159(3)1G(4)C
CDR31BP1R5B(3)W(4)
B,C
C0805N169(3)1G(4)C
CDR31BP1R6B(3)W(4)
B,C
C0805N189(3)1G(4)C
CDR31BP1R8B(3)W(4)
B,C
C0805N209(3)1G(4)C
CDR31BP2R0B(3)W(4)
B,C
C0805N229(3)1G(4)C
CDR31BP2R2B(3)W(4)
B,C
C0805N249(3)1G(4)C
CDR31BP2R4B(3)W(4)
B,C,D
C0805N279(3)1G(4)C
CDR31BP2R7B(3)W(4)
B,C,D
C0805N309(3)1G(4)C
CDR31BP3R0B(3)W(4)
B,C,D
C0805N339(3)1G(4)C
CDR31BP3R3B(3)W(4)
B,C,D
C0805N369(3)1G(4)C
CDR31BP3R6B(3)W(4)
B,C,D
C0805N399(3)1G(4)C
CDR31BP3R9B(3)W(4)
B,C,D
C0805N439(3)1G(4)C
CDR31BP4R3B(3)W(4)
B,C,D
C0805N479(3)1G(4)C
CDR31BP4R7B(3)W(4)
B,C,D
C0805N519(3)1G(4)C
CDR31BP5R1B(3)W(4)
B,C,D
C0805N569(3)1G(4)C
CDR31BP5R6B(3)W(4)
B,C,D
C0805N629(3)1G(4)C
CDR31BP6R2B(3)W(4)
B,C,D
C0805N689(3)1G(4)C
CDR31BP6R8B(3)W(4)
B,C,D
C0805N759(3)1G(4)C
CDR31BP7R5B(3)W(4)
B,C,D
C0805N829(3)1G(4)C
CDR31BP8R2B(3)W(4)
B,C,D
C0805N919(3)1G(4)C
CDR31BP9R1B(3)W(4)
F,J,K
C0805N100(3)1G(4)C
CDR31BP100B(3)W(4)
F,J,K
C0805N110(3)1G(4)C
CDR31BP110B(3)W(4)
F,J,K
C0805N120(3)1G(4)C
CDR31BP120B(3)W(4)
F,J,K
C0805N130(3)1G(4)C
CDR31BP130B(3)W(4)
F,J,K
C0805N150(3)1G(4)C
CDR31BP150B(3)W(4)
F,J,K
C0805N160(3)1G(4)C
CDR31BP160B(3)W(4)
F,J,K
C0805N180(3)1G(4)C
CDR31BP180B(3)W(4)
F,J,K
C0805N200(3)1G(4)C
CDR31BP200B(3)W(4)
F,J,K
C0805N220(3)1G(4)C
CDR31BP220B(3)W(4)
F,J,K
C0805N240(3)1G(4)C
CDR31BP240B(3)W(4)
F,J,K
C0805N270(3)1G(4)C
CDR31BP270B(3)W(4)
F,J,K
C0805N300(3)1G(4)C
CDR31BP300B(3)W(4)
F,J,K
C0805N330(3)1G(4)C
CDR31BP330B(3)W(4)
F,J,K
C0805N360(3)1G(4)C
CDR31BP360B(3)W(4)
F,J,K
C0805N390(3)1G(4)C
CDR31BP390B(3)W(4)
F,J,K
C0805N430(3)1G(4)C
CDR31BP430B(3)W(4)
F,J,K
C0805N470(3)1G(4)C
CDR31BP470B(3)W(4)
F,J,K
C0805N510(3)1G(4)C
CDR31BP510B(3)W(4)
F,J,K
C0805N560(3)1G(4)C
CDR31BP560B(3)W(4)
F,J,K
C0805N620(3)1G(4)C
CDR31BP620B(3)W(4)
F,J,K
C0805N680(3)1G(4)C
CDR31BP680B(3)W(4)
F,J,K
C0805N750(3)1G(4)C
CDR31BP750B(3)W(4)
F,J,K
C0805N820(3)1G(4)C
CDR31BP820B(3)W(4)
CAP.
pF
91
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
470
560
680
820
1,000
1,200
1,500
1,800
2,200
2,700
3,300
3,900
4,700
5,600
6,800
8,200
10,000
12,000
15,000
18,000
AVAIL.
TOL.
KEMET CAPACITORS
MIL-PRF-55681
PART NUMBER
100 Volt — BP — C0805 SIZE (MILITARY CDR31)
F,J,K
C0805N910(3)1G(4)C
CDR31BP910B(3)W(4)
F,J,K
C0805N101(3)1G(4)C
CDR31BP101B(3)W(4)
F,J,K
C0805N111(3)1G(4)C
CDR31BP111B(3)W(4)
F,J,K
C0805N121(3)1G(4)C
CDR31BP121B(3)W(4)
F,J,K
C0805N131(3)1G(4)C
CDR31BP131B(3)W(4)
F,J,K
C0805N151(3)1G(4)C
CDR31BP151B(3)W(4)
F,J,K
C0805N161(3)1G(4)C
CDR31BP161B(3)W(4)
F,J,K
C0805N181(3)1G(4)C
CDR31BP181B(3)W(4)
F,J,K
C0805N201(3)1G(4)C
CDR31BP201B(3)W(4)
F,J,K
C0805N221(3)1G(4)C
CDR31BP221B(3)W(4)
F,J,K
C0805N241(3)1G(4)C
CDR31BP241B(3)W(4)
F,J,K
C0805N271(3)1G(4)C
CDR31BP271B(3)W(4)
F,J,K
C0805N301(3)1G(4)C
CDR31BP301B(3)W(4)
F,J,K
C0805N331(3)1G(4)C
CDR31BP331B(3)W(4)
F,J,K
C0805N361(3)1G(4)C
CDR31BP361B(3)W(4)
F,J,K
C0805N391(3)1G(4)C
CDR31BP391B(3)W(4)
F,J,K
C0805N431(3)1G(4)C
CDR31BP431B(3)W(4)
F,J,K
C0805N471(3)1G(4)C
CDR31BP471B(3)W(4)
50 Volt — BP — C0805 SIZE (MILITARY CDR31)
F,J,K
C0805N511(3)5G(4)C
CDR31BP511A(3)W(4)
F,J,K
C0805N561(3)5G(4)C
CDR31BP561A(3)W(4)
F,J,K
C0805N621(3)5G(4)C
CDR31BP621A(3)W(4)
F,J,K
C0805N681(3)5G(4)C
CDR31BP681A(3)W(4)
100 Volt — BX — C0805 SIZE (MILITARY CDR31)
K,M
C0805N471(3)1X(4)C
CDR31BX471B(3)W(4)
K,M
C0805N561(3)1X(4)C
CDR31BX561B(3)W(4)
K,M
C0805N681(3)1X(4)C
CDR31BX681B(3)W(4)
K,M
C0805N821(3)1X(4)C
CDR31BX821B(3)W(4)
K,M
C0805N102(3)1X(4)C
CDR31BX102B(3)W(4)
K,M
C0805N122(3)1X(4)C
CDR31BX122B(3)W(4)
K,M
C0805N152(3)1X(4)C
CDR31BX152B(3)W(4)
K,M
C0805N182(3)1X(4)C
CDR31BX182B(3)W(4)
K,M
C0805N222(3)1X(4)C
CDR31BX222B(3)W(4)
K,M
C0805N272(3)1X(4)C
CDR31BX272B(3)W(4)
K,M
C0805N332(3)1X(4)C
CDR31BX332B(3)W(4)
K,M
C0805N392(3)1X(4)C
CDR31BX392B(3)W(4)
K,M
C0805N472(3)1X(4)C
CDR31BX472B(3)W(4)
50 Volt — BX — C0805 SIZE (MILITARY CDR31)
K,M
C0805N562(3)5X(4)C
CDR31BX562A(3)W(4)
K,M
C0805N682(3)5X(4)C
CDR31BX682A(3)W(4)
K,M
C0805N822(3)5X(4)C
CDR31BX822A(3)W(4)
K,M
C0805N103(3)5X(4)C
CDR31BX103A(3)W(4)
K,M
C0805N123(3)5X(4)C
CDR31BX123A(3)W(4)
K,M
C0805N153(3)5X(4)C
CDR31BX153A(3)W(4)
K,M
C0805N183(3)5X(4)C
CDR31BX183A(3)W(4)
(1) To complete Part Number for Dielectric, insert P or X symbol – as defined by Military specification.
(2) To complete Part Number for Dielectric, insert G or X symbol. (“G” for Military “BP,” or “X” for Military “BX.”)
(3) To complete Part Number, insert Capacitance Tolerance Symbol (when applicable) as available in MIL-PRF-55681: B – ±0.1 pF, C – ±0.25 pF.
D – ±0.5pF, F – ±1%, J – ±5%, K – ±10%, M – ±20%. NOTE: Available tolerances are listed in columns above.
(4) To complete Part Number, insert Failure Rate Symbol: M –1.0%; P –0.1%; R –0.01%; S –.001%.
Note: All MIL-PRF-55681 and KEMET Part Numbers tabulated above assume use of Solderguard II (MIL-PRF-55681 “W”; KEMET “C”) end metalization. If MIL-PRF-55681 “U” or “S” (KEMET “H”) or MIL-PRF-55681 “Y” (KEMET “C”) is required, please change designators accordingly.
MARKING
See page 97 for MIL-PRF-55681 Marking
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
89
Ceramic Surface Mount
CAP.
pF
CERAMIC CHIP/MIL-PRF-55681
Established Reliability
RATINGS & PART NUMBER REFERENCE
CAP.
pF
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
AVAIL.
TOL.
KEMET CAPACITORS
MIL-PRF-55681
PART NUMBER
100 Volt — BP — C1206 SIZE (MILITARY CDR32)
B,C
C1206N109(3)1G(4)C
CDR32BP1R0B(3)W(4)
B,C
C1206N119(3)1G(4)C
CDR32BP1R1B(3)W(4)
B,C
C1206N129(3)1G(4)C
CDR32BP1R2B(3)W(4)
B,C
C1206N139(3)1G(4)C
CDR32BP1R3B(3)W(4)
B,C
C1206N159(3)1G(4)C
CDR32BP1R5B(3)W(4)
B,C
C1206N169(3)1G(4)C
CDR32BP1R6B(3)W(4)
B,C
C1206N189(3)1G(4)C
CDR32BP1R8B(3)W(4)
B,C
C1206N209(3)1G(4)C
CDR32BP2R0B(3)W(4)
B,C
C1206N229(3)1G(4)C
CDR32BP2R2B(3)W(4)
B,C
C1206N249(3)1G(4)C
CDR32BP2R4B(3)W(4)
B,C,D
C1206N279(3)1G(4)C
CDR32BP2R7B(3)W(4)
B,C,D
C1206N309(3)1G(4)C
CDR32BP3R0B(3)W(4)
B,C,D
C1206N339(3)1G(4)C
CDR32BP3R3B(3)W(4)
B,C,D
C1206N369(3)1G(4)C
CDR32BP3R6B(3)W(4)
B,C,D
C1206N399(3)1G(4)C
CDR32BP3R9B(3)W(4)
B,C,D
C1206N439(3)1G(4)C
CDR32BP4R3B(3)W(4)
B,C,D
C1206N479(3)1G(4)C
CDR32BP4R7B(3)W(4)
B,C,D
C1206N519(3)1G(4)C
CDR32BP5R1B(3)W(4)
B,C,D
C1206N569(3)1G(4)C
CDR32BP5R6B(3)W(4)
B,C,D
C1206N629(3)1G(4)C
CDR32BP6R2B(3)W(4)
B,C,D
C1206N689(3)1G(4)C
CDR32BP6R8B(3)W(4)
B,C,D
C1206N759(3)1G(4)C
CDR32BP7R5B(3)W(4)
B,C,D
C1206N829(3)1G(4)C
CDR32BP8R2B(3)W(4)
B,C,D
C1206N919(3)1G(4)C
CDR32BP9R1B(3)W(4)
F,J,K
C1206N100(3)1G(4)C
CDR32BP100B(3)W(4)
F,J,K
C1206N110(3)1G(4)C
CDR32BP110B(3)W(4)
F,J,K
C1206N120(3)1G(4)C
CDR32BP120B(3)W(4)
F,J,K
C1206N130(3)1G(4)C
CDR32BP130B(3)W(4)
F,J,K
C1206N150(3)1G(4)C
CDR32BP150B(3)W(4)
F,J,K
C1206N160(3)1G(4)C
CDR32BP160B(3)W(4)
F,J,K
C1206N180(3)1G(4)C
CDR32BP180B(3)W(4)
F,J,K
C1206N200(3)1G(4)C
CDR32BP200B(3)W(4)
F,J,K
C1206N220(3)1G(4)C
CDR32BP220B(3)W(4)
F,J,K
C1206N240(3)1G(4)C
CDR32BP240B(3)W(4)
F,J,K
C1206N270(3)1G(4)C
CDR32BP270B(3)W(4)
F,J,K
C1206N300(3)1G(4)C
CDR32BP300B(3)W(4)
F,J,K
C1206N330(3)1G(4)C
CDR32BP330B(3)W(4)
F,J,K
C1206N360(3)1G(4)C
CDR32BP360B(3)W(4)
F,J,K
C1206N390(3)1G(4)C
CDR32BP390B(3)W(4)
F,J,K
C1206N430(3)1G(4)C
CDR32BP430B(3)W(4)
F,J,K
C1206N470(3)1G(4)C
CDR32BP470B(3)W(4)
F,J,K
C1206N510(3)1G(4)C
CDR32BP510B(3)W(4)
F,J,K
C1206N560(3)1G(4)C
CDR32BP560B(3)W(4)
F,J,K
C1206N620(3)1G(4)C
CDR32BP620B(3)W(4)
F,J,K
C1206N680(3)1G(4)C
CDR32BP680B(3)W(4)
F,J,K
C1206N750(3)1G(4)C
CDR32BP750B(3)W(4)
F,J,K
C1206N820(3)1G(4)C
CDR32BP820B(3)W(4)
F,J,K
C1206N910(3)1G(4)C
CDR32BP910B(3)W(4)
F,J,K
C1206N101(3)1G(4)C
CDR32BP101B(3)W(4)
CAP.
pF
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
1,000
1,100
1,200
1,300
1,500
1,600
1,800
2,000
2,200
4,700
5,600
6,800
8,200
10,000
12,000
15,000
18,000
22,000
27,000
33,000
39,000
AVAIL.
TOL.
KEMET CAPACITORS
MIL-PRF-55681
PART NUMBER
100 Volt — BP — C1206 SIZE (MILITARY CDR32)
F,J,K
C1206N111(3)1G(4)C
CDR32BP111B(3)W(4)
F,J,K
C1206N121(3)1G(4)C
CDR32BP121B(3)W(4)
F,J,K
C1206N131(3)1G(4)C
CDR32BP131B(3)W(4)
F,J,K
C1206N151(3)1G(4)C
CDR32BP151B(3)W(4)
F,J,K
C1206N161(3)1G(4)C
CDR32BP161B(3)W(4)
F,J,K
C1206N181(3)1G(4)C
CDR32BP181B(3)W(4)
F,J,K
C1206N201(3)1G(4)C
CDR32BP201B(3)W(4)
F,J,K
C1206N221(3)1G(4)C
CDR32BP221B(3)W(4)
F,J,K
C1206N241(3)1G(4)C
CDR32BP241B(3)W(4)
F,J,K
C1206N271(3)1G(4)C
CDR32BP271B(3)W(4)
F,J,K
C1206N301(3)1G(4)C
CDR32BP301B(3)W(4)
F,J,K
C1206N331(3)1G(4)C
CDR32BP331B(3)W(4)
F,J,K
C1206N361(3)1G(4)C
CDR32BP361B(3)W(4)
F,J,K
C1206N391(3)1G(4)C
CDR32BP391B(3)W(4)
F,J,K
C1206N431(3)1G(4)C
CDR32BP431B(3)W(4)
F,J,K
C1206N471(3)1G(4)C
CDR32BP471B(3)W(4)
F,J,K
C1206N511(3)1G(4)C
CDR32BP511B(3)W(4)
F,J,K
C1206N561(3)1G(4)C
CDR32BP561B(3)W(4)
F,J,K
C1206N621(3)1G(4)C
CDR32BP621B(3)W(4)
F,J,K
C1206N681(3)1G(4)C
CDR32BP681B(3)W(4)
F,J,K
C1206N751(3)1G(4)C
CDR32BP751B(3)W(4)
F,J,K
C1206N821(3)1G(4)C
CDR32BP821B(3)W(4)
F,J,K
C1206N911(3)1G(4)C
CDR32BP911B(3)W(4)
F,J,K
C1206N102(3)1G(4)C
CDR32BP102B(3)W(4)
50 Volt — BP — C1206 SIZE (MILITARY CDR32)
F,J,K
C1206N112(3)5G(4)C
CDR32BP112A(3)W(4)
F,J,K
C1206N122(3)5G(4)C
CDR32BP122A(3)W(4)
F,J,K
C1206N132(3)5G(4)C
CDR32BP132A(3)W(4)
F,J,K
C1206N152(3)5G(4)C
CDR32BP152A(3)W(4)
F,J,K
C1206N162(3)5G(4)C
CDR32BP162A(3)W(4)
F,J,K
C1206N182(3)5G(4)C
CDR32BP182A(3)W(4)
F,J,K
C1206N202(3)5G(4)C
CDR32BP202A(3)W(4)
F,J,K
C1206N222(3)5G(4)C
CDR32BP222A(3)W(4)
100 Volt — BX — C1206 SIZE (MILITARY CDR32)
K,M
C1206N472(3)1X(4)C
CDR32BX472B(3)W(4)
K,M
C1206N562(3)1X(4)C
CDR32BX562B(3)W(4)
K,M
C1206N682(3)1X(4)C
CDR32BX682B(3)W(4)
K,M
C1206N822(3)1X(4)C
CDR32BX822B(3)W(4)
K,M
C1206N103(3)1X(4)C
CDR32BX103B(3)W(4)
K,M
C1206N123(3)1X(4)C
CDR32BX123B(3)W(4)
K,M
C1206N153(3)1X(4)C
CDR32BX153B(3)W(4)
50 Volt — BX — C1206 SIZE (MILITARY CDR32)
K,M
C1206N183(3)5X(4)C
CDR32BX183A(3)W(4)
K,M
C1206N223(3)5X(4)C
CDR32BX223A(3)W(4)
K,M
C1206N273(3)5X(4)C
CDR32BX273A(3)W(4)
K,M
C1206N333(3)5X(4)C
CDR32BX333A(3)W(4)
K,M
C1206N393(3)5X(4)C
CDR32BX393A(3)W(4)
(1) To complete Part Number for Dielectric, insert P or X symbol – as defined by Military specification.
(2) To complete Part Number for Dielectric, insert G or X symbol. (“G” for Military “BP,” or “X” for Military “BX.”)
(3) To complete Part Number, insert Capacitance Tolerance Symbol (when applicable) as available in MIL-PRF-55681: B – ±0.1 pF, C – ±0.25 pF.
D – ±0.5pF, F – ±1%, J – ±5%, K – ±10%, M – ±20%. NOTE: Available tolerances are listed in columns above.
(4) To complete Part Number, insert Failure Rate Symbol: M –1.0%; P –0.1%; R –0.01%; S –.001%.
Note: All MIL-PRF-55681 and KEMET Part Numbers tabulated above assume use of Solderguard II (MIL-PRF-55681 “W”; KEMET “C”) end metalization. If MIL-PRF-55681 “U” or “S” (KEMET “H”) or MIL-PRF-55681 “Y” (KEMET “C”) is required, please change designators accordingly.
90
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP/MIL-PRF-55681
Established Reliability
RATINGS & PART NUMBER REFERENCE
AVAIL.
TOL.
KEMET CAPACITORS
MIL-PRF-55681
PART NUMBER
100 Volt — BP — C1210 SIZE (MILITARY CDR33)
F,J,K
C1210N102(3)1G(4)C
CDR33BP102B(3)W(4)
F,J,K
C1210N112(3)1G(4)C
CDR33BP112B(3)W(4)
F,J,K
C1210N122(3)1G(4)C
CDR33BP122B(3)W(4)
F,J,K
C1210N132(3)1G(4)C
CDR33BP132B(3)W(4)
F,J,K
C1210N152(3)1G(4)C
CDR33BP152B(3)W(4)
F,J,K
C1210N162(3)1G(4)C
CDR33BP162B(3)W(4)
F,J,K
C1210N182(3)1G(4)C
CDR33BP182B(3)W(4)
F,J,K
C1210N202(3)1G(4)C
CDR33BP202B(3)W(4)
F,J,K
C1210N222(3)1G(4)C
CDR33BP222B(3)W(4)
50 Volt — BP — C1210 SIZE (MILITARY CDR33)
2,400
F,J,K
C1210N242(3)5G(4)C
CDR33BP242A(3)W(4)
2,700
F,J,K
C1210N272(3)5G(4)C
CDR33BP272A(3)W(4)
3,000
F,J,K
C1210N302(3)5G(4)C
CDR33BP302A(3)W(4)
3,300
F,J,K
C1210N332(3)5G(4)C
CDR33BP332A(3)W(4)
100 Volt — BX — C1210 SIZE (MILITARY CDR33)
15,000
K,M
C1210N153(3)1X(4)C
CDR33BX153B(3)W(4)
18,000
K,M
C1210N183(3)1X(4)C
CDR33BX183B(3)W(4)
22,000
K,M
C1210N223(3)1X(4)C
CDR33BX223B(3)W(4)
27,000
K,M
C1210N273(3)1X(4)C
CDR33BX273B(3)W(4)
50 Volt — BX — C1210 SIZE (MILITARY CDR33)
39,000
K,M
C1210N393(3)5X(4)C
CDR33BX393A(3)W(4)
47,000
K,M
C1210N473(3)5X(4)C
CDR33BX473A(3)W(4)
56,000
K,M
C1210N563(3)5X(4)C
CDR33BX563A(3)W(4)
68,000
K,M
C1210N683(3)5X(4)C
CDR33BX683A(3)W(4)
82,000
K,M
C1210N823(3)5X(4)C
CDR33BX823A(3)W(4)
100,000 K,M
C1210N104(3)5X(4)C
CDR33BX104A(3)W(4)
100 Volt — BP — C1812 SIZE (MILITARY CDR34)
2,200
F,J,K
C1812N222(3)1G(4)C
CDR34BP222B(3)W(4)
2,400
F,J,K
C1812N242(3)1G(4)C
CDR34BP242B(3)W(4)
2,700
F,J,K
C1812N272(3)1G(4)C
CDR34BP272B(3)W(4)
3,000
F,J,K
C1812N302(3)1G(4)C
CDR34BP302B(3)W(4)
3,300
F,J,K
C1812N332(3)1G(4)C
CDR34BP332B(3)W(4)
3,600
F,J,K
C1812N362(3)1G(4)C
CDR34BP362B(3)W(4)
3,900
F,J,K
C1812N392(3)1G(4)C
CDR34BP392B(3)W(4)
4,300
F,J,K
C1812N432(3)1G(4)C
CDR34BP432B(3)W(4)
4,700
F,J,K
C1812N472(3)1G(4)C
CDR34BP472B(3)W(4)
50 Volt — BP — C1812 SIZE (MILITARY CDR34)
5,100
F,J,K
C1812N512(3)5G(4)C
CDR34BP512A(3)W(4)
5,600
F,J,K
C1812N562(3)5G(4)C
CDR34BP562A(3)W(4)
6,200
F,J,K
C1812N622(3)5G(4)C
CDR34BP622A(3)W(4)
6,800
F,J,K
C1812N682(3)5G(4)C
CDR34BP682A(3)W(4)
7,500
F,J,K
C1812N752(3)5G(4)C
CDR34BP752A(3)W(4)
8,200
F,J,K
C1812N822(3)5G(4)C
CDR34BP822A(3)W(4)
9,100
F,J,K
C1812N912(3)5G(4)C
CDR34BP912A(3)W(4)
10,000 F,J,K
C1812N103(3)5G(4)C
CDR34BP103A(3)W(4)
1,000
1,100
1,200
1,300
1,500
1,600
1,800
2,000
2,200
CAP.
pF
AVAIL.
TOL.
KEMET CAPACITORS
MIL-PRF-55681
PART NUMBER
100 Volt — BX — C1812 SIZE (MILITARY CDR34)
27,000
K,M
C1812N273(3)1X(4)C
CDR34BX273B(3)W(4)
33,000
K,M
C1812N333(3)1X(4)C
CDR34BX333B(3)W(4)
39,000
K,M
C1812N393(3)1X(4)C
CDR34BX393B(3)W(4)
47,000
K,M
C1812N473(3)1X(4)C
CDR34BX473B(3)W(4)
56,000
K,M
C1812N563(3)1X(4)C
CDR34BX563B(3)W(4)
50 Volt — BX — C1812 SIZE (MILITARY CDR34)
100,000 K,M
C1812N104(3)5X(4)C
CDR34BX104A(3)W(4)
120,000 K,M
C1812N124(3)5X(4)C
CDR34BX124A(3)W(4)
150,000 K,M
C1812N154(3)5X(4)C
CDR34BX154A(3)W(4)
180,000 K,M
C1812N184(3)5X(4)C
CDR34BX184A(3)W(4)
100 Volt — BP — C1825 SIZE (MILITARY CDR35)
4,700
F,J,K
C1825N472(3)1G(4)C
CDR35BP472B(3)W(4)
5,100
F,J,K
C1825N512(3)1G(4)C
CDR35BP512B(3)W(4)
5,600
F,J,K
C1825N562(3)1G(4)C
CDR35BP562B(3)W(4)
6,200
F,J,K
C1825N622(3)1G(4)C
CDR35BP622B(3)W(4)
6,800
F,J,K
C1825N682(3)1G(4)C
CDR35BP682B(3)W(4)
7,500
F,J,K
C1825N752(3)1G(4)C
CDR35BP752B(3)W(4)
8,200
F,J,K
C1825N822(3)1G(4)C
CDR35BP822B(3)W(4)
9,100
F,J,K
C1825N912(3)1G(4)C
CDR35BP912B(3)W(4)
10,000 F,J,K
C1825N103(3)1G(4)C
CDR35BP103B(3)W(4)
50 Volt — BP — C1825 SIZE (MILITARY CDR35)
11,000 F,J,K
C1825N113(3)5G(4)C
CDR35BP113A(3)W(4)
12,000 F,J,K
C1825N123(3)5G(4)C
CDR35BP123A(3)W(4)
13,000 F,J,K
C1825N133(3)5G(4)C
CDR35BP133A(3)W(4)
15,000 F,J,K
C1825N153(3)5G(4)C
CDR35BP153A(3)W(4)
16,000 F,J,K
C1825N163(3)5G(4)C
CDR35BP163A(3)W(4)
18,000 F,J,K
C1825N183(3)5G(4)C
CDR35BP183A(3)W(4)
20,000 F,J,K
C1825N203(3)5G(4)C
CDR35BP203A(3)W(4)
22,000 F,J,K
C1825N223(3)5G(4)C
CDR35BP223A(3)W(4)
100 Volt — BX — C1825 SIZE (MILITARY CDR35)
56,000
K,M
C1825N563(3)1X(4)C
CDR35BX563B(3)W(4)
68,000
K,M
C1825N683(3)1X(4)C
CDR35BX683B(3)W(4)
82,000
K,M
C1825N823(3)1X(4)C
CDR35BX823B(3)W(4)
100,000 K,M
C1825N104(3)1X(4)C
CDR35BX104B(3)W(4)
120,000 K,M
C1825N124(3)1X(4)C
CDR35BX124B(3)W(4)
150,000 K,M
C1825N154(3)1X(4)C
CDR35BX154B(3)W(4)
50 Volt — BX — C1825 SIZE (MILITARY CDR35)
180,000 K,M
C1825N184(3)5X(4)C
CDR35BX184A(3)W(4)
220,000 K,M
C1825N224(3)5X(4)C
CDR35BX224A(3)W(4)
270,000 K,M
C1825N274(3)5X(4)C
CDR35BX274A(3)W(4)
330,000 K,M
C1825N334(3)5X(4)C
CDR35BX334A(3)W(4)
390,000 K,M
C1825N394(3)5X(4)C
CDR35BX394A(3)W(4)
470,000 K,M
C1825N474(3)5X(4)C
CDR35BX474A(3)W(4)
(1) To complete Part Number for Dielectric, insert P or X symbol – as defined by Military specification.
(2) To complete Part Number for Dielectric, insert G or X symbol. (“G” for Military “BP,” or “X” for Military “BX.”)
(3) To complete Part Number, insert Capacitance Tolerance Symbol (when applicable) as available in MIL-PRF-55681: B – ±0.1 pF, C – ±0.25 pF,
D – ±0.5pF, F – ±1%, J – ±5%, K – ±10%, M – ±20%. NOTE: Available tolerances are listed in columns above.
(4) To complete Part Number, insert Failure Rate Symbol: M –1.0%; P –0.1%; R –0.01%; S –.001%.
Note: All MIL-PRF-55681 and KEMET Part Numbers tabulated above assume use of Solderguard II (MIL-PRF-55681 “W”; KEMET “C”) end metalization. If MIL-PRF-55681 “U” or “S” (KEMET “H”) or MIL-PRF-55681 “Y” (KEMET “C”) is required, please change designators accordingly.
MIL-PRF-55681 MAXIMUM INDIVIDUAL PACKAGING QUANTITIES
CHIP
SIZE
C0805
C1206
C1210
C1805
BULK BULK - ANTI-STATIC
REELED STD BAG
BAG
2,500
25,000
10,000
2,500
25,000
10,000
2,500
25,000
10,000
2,500
7,500
3,000
CHIP
SIZE
C1808
C1812
C1825
C2225
BULK BULK - ANTI-STATIC
REELED STD BAG
BAG
2,500
7,500
3,000
1,100
7,500
3,000
1,100
7,500
1,000
1,100
5,000
1,000
MIL-PRF-55681 chips available in 7" reels only.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
91
Ceramic Surface Mount
CAP.
pF
TANTALUM AND ALUMINUM CHIP CAPACITORS
Packaging Information
Tape & Reel Packaging
KEMET’s Molded Tantalum and Aluminum Chip
Capacitor families are packaged in 8 mm and 12 mm plastic
tape on 7" and 13" reels, in accordance with EIA Standard
481-1: Taping of Surface Mount Components for Automatic
Handling. This packaging system is compatible with all tape
fed automatic pick and place systems.
Right Hand
Orientation
Only
(+)
Embossed Carrier
(–)
Embossment
8mm
±.30
8mm
(0.315")
(.315or±.012")
or
12mm
(0.472")
12mm
±.30
(.472 ±.012")
Top Tape Thickness
.10mm (.004") Max Thickness
178mm
(7.00")
180mm
(7.0")
oror
330mm
(13.00")
330mm
(13.0")
Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.
Refer to EIA-556.
Case Code
KEMET
EIA
R
2012-12
S
3216-12
T
3528-12
U
6032-15
W
7343-15
V
7343-20
A
3216-18
B
3528-21
C
6032-28
D
7343-31
Y
7343-40
X
7343-43
E
7260-38
Tape
Width-mm
8
8
8
12
12
12
8
8
12
12
12
12
12
7" Reel*
2,500
2,500
2,500
1,000
1,000
1,000
2,000
2,000
500
500
500
500
500
13" Reel*
10,000
10,000
10,000
5,000
3,000
3,000
9,000
8,000
3,000
2,500
2,000
2,000
2,000
* No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging.
* Standard reel packaging is not mandatory.
* Bulk packaging also available using C-7610.
92
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Packaging
QUANTITIES PACKAGED PER REEL
CERAMIC CHIP CAPACITORS
Packaging Information
Tape & Reel Packaging
KEMET offers Multilayer Ceramic Chip Capacitors
packaged in 8mm and 12mm plastic tape on 7" and
13" reels in accordance with EIA standard 481-1:
Taping of surface mount components for automatic
handling. This packaging system is compatible with all
tape fed automatic pick and place systems. See page 78
for details on reeling quantities for commercial chips
and page 87 for MIL-PRF-55681 chips.
g
handling. This packaging system is compatible with all
tape fed automatic pick and place systems. See page 81
for details on reeling quantities for commercial chips
and page 90 for MIL-PRF-55681 chips.
Anti-Static Reel
Embossed Carrier*
0402 and 0603 case sizes
available on punched paper only.
®
T
ME
KE
Chip Orientation
in Pocket
(except 1825 Commercial, and 1825 & 2225 Military)
Embossment
8mm ±.30
(.315 ±.012")
or
12mm ±.30
(.472 ±.012")
178mm (7.00")
or
330mm (13.00")
Anti-Static Cover Tape
(.10mm (.004") Max Thickness)
* Punched paper carrier used for 0402 and 0603 case size.
SURFACE MOUNT LAND DIMENSIONS - CERAMIC CHIP CAPACITORS - MM
Reflow Solder
Dimension
0402
0603
0805
1206
1210
1812
1825
2220
2225
CourtyardC
C
X
X
GG
Y
Z
Z
Y
Z
2.14
2.78
3.30
4.50
4.50
5.90
5.90
7.00
7.00
G
0.28
0.68
0.70
1.50
1.50
2.30
2.30
3.30
3.30
X Y(ref) C(ref)
0.74 0.93 1.21
1.08 1.05 1.73
1.60 1.30 2.00
2.00 1.50 3.00
2.90 1.50 3.00
3.70 1.80 4.10
6.90 1.80 4.10
5.50 1.85 5.15
6.80 1.85 5.15
Wave Solder
Z
G
X
Y(ref) Smin
Not Recommended
3.18
3.70
4.90
4.90
0.68
0.70
1.50
1.50
0.80
1.10
1.40
2.00
1.25
1.50
1.70
1.70
1.93
2.20
3.20
3.20
Not Recommended
Packaging
Grid
Grid
placement
courtyard
Placement
Calculation Formula
Z = Lmin + 2Jt + Tt
G = Smax - 2Jh -Th
X = Wmin + 2Js + Ts
Tt, Th, Ts = Combined tolerances
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
93
TANTALUM, CERAMIC AND
ALUMINUM CHIP CAPACITORS
Packaging Information
Performance Notes
1. Cover Tape Break Force: 1.0 Kg Minimum.
2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be:
Tape Width
Peel Strength
8 mm
0.1 Newton to 1.0 Newton (10g to 100g)
12 mm
0.1 Newton to 1.3 Newton (10g to 130g)
The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier
tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape
shall be pulled at a velocity of 300 ±10 mm/minute.
3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13")
reels (with C-7280). Note that 13” reels are preferred.
4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes.
Refer to EIA-556.
Embossed Carrier Tape Configuration: Figure 1
Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern)
Constant Dimensions — Millimeters (Inches)
Tape Size
8 mm
and
12 mm
D0
E
1.5
1.75 ±0.10
+0.10 -0.0
(0.059
(0.069 ±0.004)
+0.004, -0.0)
P0
P2
T Max
T1 Max
4.0 ±0.10
2.0 ±0.05
0.600
0.100
(0.157 ±0.004)
(0.079 ±0.002)
(0.024)
(0.004)
Variable Dimensions — Millimeters (Inches)
Tape Size
Pitch
B1 Max.
Note 1
D1 Min.
Note 2
F
P1
R Min.
Note 3
T2 Max
W
8 mm
Single
(4 mm)
4.4
1.0
3.5 ±0.05
4.0 ±0.10
25.0
2.5
8.0 ±0.30
(.315 ±0.012)
12 mm
Double
(8 mm)
(0.173)
(0.039) (0.138 ±0.002)
(0.157 ±0.004) (0.984)
(0.098)
8.2
(0.323)
1.5
5.5 ±0.05
(0.059) (0.217 ±0.002)
8.0 ±0.10
30.0
(0.315 ±0.004) (1.181)
4.6
12.0 ±0.30
(0.181) (0.472 ±0.012)
A0B0K0
Note 4
NOTES
1. B1 dimension is a reference dimension for tape feeder clearance only.
2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of
embossment location and hole location shall be applied independent of each other.
3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require
additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2)
4. The cavity defined by A0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not protrude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical
restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm
maximum in the pocket (not applicable to vertical clearance.)
94
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
TANTALUM, CERAMIC AND
ALUMINUM CHIP CAPACITORS
Packaging Information
Embossed Carrier Tape Configuration (cont.)
20°
Sketch D: Tape Camber (Top View)
1mm (0.039) Max.
1mm (0.039) Max.
250mm (9.843)
Allowable camber to be 1 mm/250 mm.
400mm (15.75) Min.
Figure 2:
Tape Leader
& Trailer
Dimensions
(Metric
Dimensions
Will Govern)
Packaging
Figure 3: Reel Dimensions (Metric Dimensions will govern)
Table 2 – REEL DIMENSIONS (Metric will govern)
Tape Size
8 mm
A Max
330.0
(12.992)
B* Min
1.5
(0.059)
C
13.0 ± 0.20
(0.512 ± 0.008)
D* Min
20.2
(0.795)
12 mm
330.0
(12.992)
1.5
(0.059)
13.0 ± 0.20
(0.512 ± 0.008)
20.2
(0.795)
N Min
50.0
(1.969)
See
Note 3
Table 1
W1
8.4
+1.5, -0.0
(0.331
+0.059, -0.0)
12.4
+2.0, -0.0
(0.488
+0.078, -0.0)
W2 Max
14.4
(0.567)
18.4
(0.724)
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
W3
7.9 Min
(0.311)
10.9 Max
(0.429)
11.9 Min
(0.469)
15.4 Max
(0.606)
95
CERAMIC CHIP CAPACITORS
Packaging Information
Punched Carrier (Paper Tape) Configuration (Ceramic Chips Only):
10 pitches cumulative
tolerance on tape
±0.2 (±0.008)
P0
T
P2
D0
E
Top
Tape
Cover
Bottom
Tape
Cover
A0
F
W
B0
G2
T1
P1
User Direction of Feed
Center lines
of cavity
Max. Cavity Size
See Note 1
Table 1
Table 1: 8 & 12mm Punched Tape
(Metric Dimensions Will Govern)
Constant Dimensions - Millimeters (Inches)
Tape
Size
D0
P0
E
T1
P2
G1
G2
R Min.
8mm
1.5
1.75 ±0.10
4.0 ± 0.10
2.0 ± 0.05
0.10 0.75 0.75 25 (.984)
and
+0.10, -0.0
(.004) (.030) (.030) See Note 2
12mm
(.059
(.069 ±0.004) (.157 ± 0.004) (.079 ± 0.002) Max. Min. Min.
Table 1
+0.004, -0.0)
Table 1: 8 & 12mm Punched Tape
(Metric Dimensions Will Govern)
Variable Dimensions - Millimeters (Inches)
Tape
Size
8mm
1/2
Pitch
P1
2.0 ± 0.10
(.079 ±.004)
3.5 ± 0.05
See Requirements
Section 3.3 (d) (.138 ± .002)
8mm
4.0 ± 0.10
(0.157 ± .004)
12mm
4.0 ± 0.10
(0.157 ± .004)
A0B0
W
F
5.5 ± 0.05
12mm
8.0 ± 0.10
(.217 ± .002)
Double (0.315 ± .004)
Pitch
8.0 ± 0.3
(.315 ± 0.012)
See Note 1
Table 1
12.0 ± 0.3
T
1.1mm (.043)
Max. for Paper
Base Tape and
1.6mm (.063)
Max. for NonPaper Base
Compositions.
See Note 3.
(.472 ± .012)
Note:
1. A0, B0 and T determined by the maximum dimensions to the ends of the terminals extending from the
body and/or the body dimensions of the component. The clearance between the ends of the terminals or
body of the component to the sides and depth of the cavity (A0, B0 and T) must be within 0.05mm (.002)
minimum and 0.50mm (.020) maximum. The clearance allowed must also prevent rotation of the component
within the cavity of not more than 20 degrees (see sketches A and B).
2. Tape with components shall pass around radius "R" without damage.
3. KEMET nominal thicknesses are: 0402 = 0.6mm and all others 0.95mm minimum.
Sketch A:
Bending Radius
See Note 2
Table 1
Sketch B:
Max. Component
Rotation - Front
Cross Sectional View
R
(Min.)
20°
96
Sketch C:
Component Rotation - Top View
Maximum
20° component rotation.
Typical
component
center line
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
CERAMIC CHIP CAPACITORS
Packaging Information
Bulk Cassette Packaging (Ceramic Chips only)
Table 2 – Capacitance Values Available
In Bulk Cassette Packaging
6.8 ± 0.1
8.8 ± 0.1
12.0 ± 0.1
(Meets Dimensional Requirements IEC-286-6 and EIAJ 7201)
53.3*
2.0 ±
31.5 ± 0.2
0
3.0 ±
0.1
0
0
0.1
0.2
0
0402
All
All
All
All
0603
All
All
All
All
0805
C0G
200
100
50
109
109
109
181
331
102
X7R
200
100
50
25
16
221
221
221
221
221
392
103
273
104
104
Y5V
25
16
104
104
224
224
19.0*
1.5 ±
Unit: mm
* Reference
36 ± 00.2
10*
Min. Max.
Case
Cap Cap
Size Dielectric Voltage Value Value
5.0*
110 ± 0.7
Table 1 – Capacitor Dimensions for Bulk
Cassette Packaging – Millimeters
Metric
Size
Code
EIA
Size
Code
1005
1608
2012
0402
0603
0805
Length
L
Width
W
Thickness Bandwidth
T
B
1.0 ± 0.05 0.5 ± 0.05
1.6 ± 0.07 0.8 ± 0.07
2.0 ± 0.10 1.25 ± 0.10
0.5 ± .05
0.8 ± .07
0.6 ± .10
0.2 to 0.4
0.2 to 0.5
0.5 to 0.75
Minimum
Separation
S
Number of
Pcs/Cassette
0.3
0.7
0.75
50,000
15,000
10,000
Terminations: KEMET nickel barrier layer with a tin overplate.
CAPACITOR MARKING TABLE
(Marking Optional - Not Available
for 0402 Size or Y5V Dielectric)
9
0
1
2
3
4
5
6
7
A
B
C
D
E
F
G
H
J
K
L
M
N
P
Q
R
S
T
U
V
W
X
Y
Z
a
b
d
e
f
m
n
t
y
0.10
0.11
0.12
0.13
0.15
0.16
0.18
0.20
0.22
0.24
0.27
0.30
0.33
0.36
0.39
0.43
0.47
0.51
0.56
0.62
0.68
0.75
0.82
0.91
0.25
0.35
0.40
0.45
0.50
0.60
0.70
0.80
0.90
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
2.5
3.5
4.0
4.5
5.0
6.0
7.0
8.0
9.0
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
25
35
40
45
50
60
70
80
90
100
110
120
130
150
160
180
200
220
240
270
300
330
360
390
430
470
510
560
620
680
750
820
910
250
350
400
450
500
600
700
800
900
1000
1100
1200
1300
1500
1600
1800
2000
2200
2400
2700
3000
3300
3600
3900
4300
4700
5100
5600
6200
6800
7500
8200
9100
2500
3500
4000
4500
5000
6000
7000
8000
9000
10,000
11,000
12,000
13,000
15,000
16,000
18,000
20,000
22,000
24,000
27,000
30,000
33,000
36,000
39,000
43,000
47,000
51,000
56,000
62,000
68,000
75,000
82,000
91,000
25,000
35,000
40,000
45,000
50,000
60,000
70,000
80,000
90,000
100,000
110,000
120,000
130,000
150,000
160,000
180,000
200,000
220,000
240,000
270,000
300,000
330,000
360,000
390,000
430,000
470,000
510,000
560,000
620,000
680,000
750,000
820,000
910,000
250,000
350,000
400,000
450,000
500,000
600,000
700,000
800,000
900,000
1,000,000
1,100,000
1,200,000
1,300,000
1,500,000
1,600,000
1,800,000
2,000,000
2,200,000
2,400,000
2,700,000
3,000,000
3,300,000
3,600,000
3,900,000
4,300,000
4,700,000
5,100,000
5,600,000
6,200,000
6,800,000
7,500,000
8,200,000
9,100,000
2,500,000
3,500,000
4,000,000
4,500,000
5,000,000
6,000,000
7,000,000
8,000,000
9,000,000
10,000,000
11,000,000
12,000,000
13,000,000
15,000,000
16,000,000
18,000,000
20,000,000
22,000,000
24,000,000
27,000,000
30,000,000
33,000,000
36,000,000
39,000,000
43,000,000
47,000,000
51,000,000
56,000,000
62,000,000
68,000,000
75,000,000
82,000,000
91,000,000
25,000,000
35,000,000
40,000,000
45,000,000
50,000,000
60,000,000
70,000,000
80,000,000
90,000,000
Laser marking is available as an extra-cost option for
most KEMET ceramic chips. Such marking is two
sided, and includes a K to identify KEMET, followed by
two characters (per EIA-198 - see table below) to
identify the capacitance value. Note that marking is
not available for size 0402 nor for any Y5V chip. In
addition, the 0603 marking option is limited to the K
only.
KA3
Example shown is 1,000 pF capacitor.
©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
Packaging
Capacitance (pF) For Various Numeral Identifiers
Numeral
Alpha
Character
97
World Sales Headquarters
KEMET Electronics Corporation
P.O. Box 5928
Greenville, SC 29606
Phone: 864-963-6300
Europe
KEMET Electronics S.A.
1-3, Avenue de la Paix
P.O.B. 76
CH-1211 Geneva 20,
Switzerland
Phone: 41-22-715-0100
Asia
KEMET Electronics Marketing PTE Ltd.
101 Thomson road, #23-03
United Square
Singapore, 307591, Singapore
Phone: 65-6353-6636
KEMET Electronics Asia Ltd.
30 Canton Road, Room 1512
SilverCord Tower II
Tsimshatshui, Kowloon
Hong Kong
Phone: 852-2305-1168
KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not
assume any responsibility for infringement that might result from the use of KEMET capacitors in potential circuit designs.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com