MIL-PRF (CWR Style) Established Reliability T492 CWR11 Style Mil-PRF-55365/8 Overview The KEMET T492 series is approved to MIL-PRF-55365/8 (CWR11) with Weibull failure rates of B level (0.1% failures per 1000 hours), C level (0.01% failures per 1000 hours), or D level (0.001% failures per 1000 hours). This CWR11 product is a precision-molded device, with compliant terminations and indelible laser marking. This is the military version of the global IEC/EIA standard represented by KEMET's T491 Series. Tape and reeling per EIA 481-1 is standard. Benefits • • • • • • • • • • Applications Established reliability options Taped and reeled per EIA 481-1 Symmetrical, compliant terminations Laser-marked case 100% surge current test available on all case sizes Qualified to MIL-PRF-55365/8, Style CWR11 Termination options B, C, H, K Weibull failure options B, C, and D Voltage rating of 4-50 VDC Operating temperature range of -55˚C to +125˚C Typical applications include decoupling and filtering in military and aerospace applications requiring CWR11 devices. Environmental Compliance RoHS Compliant (6/6)* according to Directive 2002/95/EC *When ordered with 100% Sn Solder SPICE For a detailed analysis of specific part numbers, please visit kemet.com for a free download of KEMET's SPICE software. The KEMET SPICE program is freeware intended to aid design engineers in analyzing the performance of these capacitors over frequency, temperature, ripple, and DC bias conditions. One WORLD One Brand One Strategy One Focus One Team © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com One KEMET T2006-1 • 10/11/2010 1 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Ordering Information T 492 D 156 K 020 A C 4251 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/Design Lead Material Surge (C-Spec) T= CWR 11 Tantalum Established Reliability A = 3216-18 First two digits B = 3258-19 represent significant C = 6032-25 figures. Third digit D = 7343-31 specifies number of zeros. J = ±5% K = ±10% M = ±20% 006 = 6.3V 010 = 10V 015 = 15V 020 = 20V 025 = 25V 035 = 35V 050 = 50V A = N/A C = Hot Solder Dipped B = 0.1%/1000 hrs H = Standard Solder C = .01%/1000 hrs Coated (SnPb 5% Pb D = .001%/1000 hrs minimum) B = Gold Plated K = Solder Fused 4250= 25C after Weibull 4251 = -55C and 85C after Weibull 4252 = -55C and 85C before Weibull *See www.kemet.com for Pb Free transition. Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55°C to 125°C 0.1µF - 100µF @ 120 Hz/25°C J Tolerance (5%), K Tolerance (10%), M Tolerance (20%) 4V - 50V DF(120Hz) Refer to Part Number Electrical Specification Table ESR (100kHz) Refer to Part Number Electrical Specification Table Leakage Current ≤ 0.01CV (µA) at Rated Voltage after 5 minutes © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 2 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Qualification Test Condition Characteristics ΔC/C Endurance Storage Life Thermal Shock Temperature Stability 85°C @ Rated Voltage, 2000 Hrs. 125°C @ 2/3 Rated Voltage, 2000 Hrs. 125°C @ 0 Volts, 2000 Hrs. Mil-Std-202, Method 107, Condition B, mounted, -55C° to 125°C, 1000 cycles Extreme temperature exposure at a succession of continuous steps at +25ºC, -55ºC, +25ºC, +85ºC, +125ºC, +25ºC. DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits ΔC/C Within ± 10% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits ΔC/C Within ± 5% of initial value DF Within initial limits DCL Within 1.25 x initial limit ESR Within initial limits +25°C -55°C +85°C +125°C ΔC/C IL* ± 10% ± 10% ± 20% DF IL IL 1.5 x IL 1.5 x IL DCL IL n/a 10 x IL 12 x IL ΔC/C Surge Voltage Mechanical Shock/Vibration Within ± 10% of initial value 25°C and 85° C, 1.32 x Rated Voltage 1000 cycles (125°C, 1.2 x Rated Voltage) Mil-Std-202, Meth. 213, Cond. I, 100G Peak Mil-Std-202, Meth. 204, Cond. D, 10Hz to 2000Hz, 20G Peak Within ± 5% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits ΔC/C Within ±10 of initial value DF Within initial limits DCL Within initial limits Additional qualification tests per MIL-PRF-55365/8 *IL = Initial Limit Certification Mil-PRF-55365/8 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 3 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Electrical Characteristics Capacitance vs. Frequency ESR vs. Frequency 100 1000 T492B225/020 T492C685/020 T492B225/020_IMP T492D156/020 T492C685/020_IMP T492D156/020_IMP 10 T492B225/020_ESR Capacitance (µF) Impedance, ESR (Ohms) 100 T492C685/020_ESR T492D156/020_ESR 10 1 0.1 1 0.1 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 0.01 10,000,000 100 1,000 10,000 100,000 Frequency (Hz) 1,000,000 10,000,000 Dimensions – Millimeters (Inches) Metric will govern Termination cutout at KEMET’s Option, either end Case Size KEMET EIA A 3216-18 B 3528-21 C 6032-28 D 7343-31 Component L* W* H* 3.2 ± 0.2 (.126 ± .008) 3.5 ± 02 (138 ± .008) 6.0 ± 0.3 (.236 ± .03) 7.3 ± 0.3 (287 ± .012) 1.6 ± 0.2 (.063 ± .008) 2.8 ± 0.2 (.110 ± .008) 3.2 ± 0.3 (.126 ± .012) 4.3 ± 0.3 (.169 ± .012) 1.6 ± 0.2 (.063 ± .008) 1.9 ± 0.2 (.075 ± .008) 2.5 ± 0.3 (.098 ± .012) 2.8 ± 0.3 (098 ± .012) F* ±0.1 S* ±0.3 B* ±0.15 ±(.004) ±(.012) (Ref) ±.006 1.2 (.047) 0.8 (.031) 0.4 (.016) 2.2 (.087) 0.8 (.031) 0.4 (.016) 2.2 (.087) 1.3 (.051) 0.5 (.020) 2.4 (.094) 1.3 (.051) 0.5 (.020) X (Ref) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) 0.10 ± 0.10 (.004 ± .004) P (Ref) R (Ref) T (Ref) A (Min) G (Ref) E (Ref) 0.4 (.016) 0.4 (.016) 0.13 (.005) 1.4 (.055) 1.1 (.043) 1.3 (.051) 0.5 (.020) 1.0 (.039) 0.13 (.005) 2.1 (.083) 1.8 (.071) 2.2 (.087) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.1 ( (.122) 2.8 (.110) 2.4 (.094) 0.9 (.035) 1.0 (.039) 0.13 (.005) 3.8 (.150) 3.5 (.138) 3.5 (.138) Notes: (Ref) – Dimensions provided for reference only. No dimensions provided for B, P or R because low profile cases do not have a bevel or a notch. * MIL-C-55365/8 specified dimensions © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 4 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Table 1 – Ratings & Part Number Reference Rated Voltage Rated Cap 105ºC VDC 4 4 4 4 4 4 4 4 120Hz µF 2.2 4.7 6.8 10 15 33 68 100 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 KEMET Part Number Mil-C-55365/4F Part Number DC Leakage A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 D/7343-31 D/7343-31 (See below for part options) T492A225(1)004(2)(3)(4) T492A475(1)004(2)(3)(4) T492B685(1)004(2)(3)(4) T492B106(1)004(2)(3)(4) T492B156(1)004(2)(3)(4) T492C336(1)004(2)(3)(4) T492D686(1)004(2)(3)(4) T492D107(1)004(2)(3)(4) (See below for part options) CWR11C(6)225(1)(2)(5) CWR11C(6)475(1)(2)(5) CWR11C(6)685(1)(2)(5) CWR11C(6)106(1)(2)(5) CWR11C(6)156(1)(2)(5) CWR11C(6)336(1)(2)(5) CWR11C(6)686(1)(2)(5) CWR11C(6)107(1)(2)(5) +20ºC µAmps 0.1 0.2 0.3 0.4 0.6 1.3 2.7 4.0 1.5 2.2 3.3 4.7 6.8 10 15 22 47 68 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 D/7343-31 D/7343-31 T492A155(1)006(2)(3)(4) T492A225(1)006(2)(3)(4) T492A335(1)006(2)(3)(4) T492B475(1)006(2)(3)(4) T492B685(1)006(2)(3)(4) T492B106(1)006(2)(3)(4) T492C156(1)006(2)(3)(4) T492C226(1)006(2)(3)(4) T492D476(1)006(2)(3)(4) T492D686(1)006(2)(3)(4) CWR11D(6)155(1)(2)(5) CWR11D(6)225(1)(2)(5) CWR11D(6)335(1)(2)(5) CWR11D(6)475(1)(2)(5) CWR11D(6)685(1)(2)(5) CWR11D(6)106(1)(2)(5) CWR11D(6)156(1)(2)(5) CWR11D(6)226(1)(2)(5) CWR11D(6)476(1)(2)(5) CWR11D(6)686(1)(2)(5) 0.1 0.1 0.2 0.3 0.4 0.6 0.9 1.4 3.0 4.3 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 5.5 4.5 3.5 3.0 2.2 1.1 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 10 10 10 10 10 10 10 10 10 1 1.5 2.2 3.3 4.7 6.8 15 33 47 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 D/7343-31 D/7343-31 T492A105(1)010(2)(3)(4) T492A155(1)010(2)(3)(4) T492A225(1)010(2)(3)(4) T492B335(1)010(2)(3)(4) T492B475(1)010(2)(3)(4) T492B685(1)010(2)(3)(4) T492C156(1)010(2)(3)(4) T492D336(1)010(2)(3)(4) T492D476(1)010(2)(3)(4) CWR11F(6)105(1)(2)(5) CWR11F(6)155(1)(2)(5) CWR11F(6)225(1)(2)(5) CWR11F(6)335(1)(2)(5) CWR11F(6)475(1)(2)(5) CWR11F(6)685(1)(2)(5) CWR11F(6)156(1)(2)(5) CWR11F(6)336(1)(2)(5) CWR11F(6)476(1)(2)(5) 0.1 0.2 0.2 0.3 0.5 0.7 1.5 3.3 4.7 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 10.0 8.0 8.0 5.5 4.5 3.5 2.5 1.1 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 15 15 15 15 15 15 15 15 15 0.68 1 1.5 2.2 3.3 4.7 10 22 33 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 D/7343-31 D/7343-31 T492A684(1)015(2)(3)(4) T492A105(1)015(2)(3)(4) T492A155(1)015(2)(3)(4) T492B225(1)015(2)(3)(4) T492B335(1)015(2)(3)(4) T492B475(1)015(2)(3)(4) T492C106(1)015(2)(3)(4) T492D226(1)015(2)(3)(4) T492D336(1)015(2)(3)(4) CWR11H(6)684(1)(2)(5) CWR11H(6)105(1)(2)(5) CWR11H(6)155(1)(2)(5) CWR11H(6)225(1)(2)(5) CWR11H(6)335(1)(2)(5) CWR11H(6)475(1)(2)(5) CWR11H(6)106(1)(2)(5) CWR11H(6)226(1)(2)(5) CWR11H(1)336(1)(2)(5) 0.1 0.2 0.2 0.3 0.5 0.7 1.5 3.3 5.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 12.0 10.0 8.0 5.5 5.0 4.0 2.5 1.1 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 20 20 20 20 20 20 20 20 20 20 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 15 22 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 D/7343-31 D/7343-31 T492A474(1)020(2)(3)(4) T492A684(1)020(2)(3)(4) T492A105(1)020(2)(3)(4) T492B155(1)020(2)(3)(4) T492B225(1)020(2)(3)(4) T492B335(1)020(2)(3)(4) T492C475(1)020(2)(3)(4) T492C685(1)020(2)(3)(4) T492D156(1)020(2)(3)(4) T492D226(1)020(2)(3)(4) CWR11J(6)474(1)(2)(5) CWR11J(6)684(1)(2)(5) CWR11J(6)105(1)(2)(5) CWR11J(6)155(1)(2)(5) CWR11J(6)225(1)(2)(5) CWR11J(6)335(1)(2)(5) CWR11J(6)475(1)(2)(5) CWR11J(6)685(1)(2)(5) CWR11J(6)156(1)(2)(5) CWR11J(6)226(1)(2)(5) 0.1 0.1 0.2 0.3 0.4 0.7 0.9 1.4 3.0 4.4 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 14.0 12.0 10.0 6.0 5.0 4.0 3.0 2.4 1.1 0.9 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 A/3216-18 T492A334(1)025(2)(3)(4) CWR11K(6)334(1)(2)(5) 0.1 Capacitance Capacitance Voltage µAmps (see below for (see below forFailure Rate/Design Codepart (pF)options) Tolerance part options) +20ºC T 492 25 0.33 Capacitor VDC µFSeries Class 105ºC 120Hz Case Code/ Case Size KEMET/EIA D Case Size KEMET/EIA 156 K 020 A DF Moisture Sensitivity ESR +20ºC 120Hz +20ºC 100kHz % Max mOhms 6.0 8.0 6.0 8.0 6.0 5.5 6.0 4.0 6.0 3.5 6.0 2.2 6.0 1.1 8.0 0.9 C 4251 Temp≤260ºC J-STD-020D 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 4.0 15.0 1.0 Lead%Material Surge (C-Spec) Max mOhms J-STD-020A +20ºC +20ºC 100kHz Temp≤260ºC CWR 11 Case A = 3216-18 First two digits J = ±5% Mil-C-55365/4F 006 = 6.3V A Part = N/A Rated T = Rated Code/ DC C = Hot Solder Dipped 4250= 25C after Moisture KEMET Part Number DFSolder ESR Established Case B = 3258-19 010 = 10V B = 0.1%/1000 hrs H = Standard Weibull Tantalum Cap Voltage Size represent significant K = ±10% Number Leakage Sensitivity Reliability C = 6032-25 figures. Third digit M = ±20% 015 = 15V C = .01%/1000 hrs Coated (SnPb 5% Pb 4251 = -55C and D = 7343-31 specifies number of 020 = 20V D = .001%/1000 hrs minimum) 85C after Weibull Other part number options: zeros. 025 = 25V B = Gold Plated 4252 = -55C and Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance). 035 = 35V K = Solder Fused 85C before Weibull 050 = 50V Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance). Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H) Also available on large (13 inch) reels. Add 7280 to the end of the part number. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Roll Over for Order Info. T2006-1 • 10/11/2010 5 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Table 1 – Ratings & Part Number Reference con't Rated Voltage Rated Cap 105ºC VDC 25 25 25 25 25 25 25 25 25 25 120Hz µF 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 10 15 35 35 35 35 35 35 35 35 35 35 35 35 Case Code/ Case Size KEMET Part Number Mil-C-55365/4F Part Number DC Leakage A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 (See below for part options) T492A474(1)025(2)(3)(4) T492B684(1)025(2)(3)(4) T492B105(1)025(2)(3)(4) T492B155(1)025(2)(3)(4) T492C225(1)025(2)(3)(4) T492C335(1)025(2)(3)(4) T492C475(1)025(2)(3)(4) T492D685(1)025(2)(3)(4) T492D106(1)025(2)(3)(4) T492D156(1)025(2)(3)(4) (See below for part options) CWR11K(6)474(1)(2)(5) CWR11K(6)684(1)(2)(5) CWR11K(6)105(1)(2)(5) CWR11K(6)155(1)(2)(5) CWR11K(6)225(1)(2)(5) CWR11K(6)335(1)(2)(5) CWR11K(6)475(1)(2)(5) CWR11K(6)685(1)(2)(5) CWR11K(6)106(1)(2)(5) CWR11K(6)156(1)(2)(5) +20ºC µAmps 0.1 0.2 0.3 0.4 0.6 0.8 1.2 1.7 2.5 3.8 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 6.8 A/3216-18 A/3216-18 A/3216-18 A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 T492A104(1)035(2)(3)(4) T492A154(1)035(2)(3)(4) T492A224(1)035(2)(3)(4) T492A334(1)035(2)(3)(4) T492B474(1)035(2)(3)(4) T492B684(1)035(2)(3)(4) T492B105(1)035(2)(3)(4) T492C155(1)035(2)(3)(4) T492C225(1)035(2)(3)(4) T492C335(1)035(2)(3)(4) T492D475(1)035(2)(3)(4) T492D685(1)035(2)(3)(4) CWR11M(6)104(1)(2)(5) CWR11M(6)154(1)(2)(5) CWR11M(6)224(1)(2)(5) CWR11M(6)334(1)(2)(5) CWR11M(6)474(1)(2)(5) CWR11M(6)684(1)(2)(5) CWR11M(6)105(1)(2)(5) CWR11M(6)155(1)(2)(5) CWR11M(6)225(1)(2)(5) CWR11M(6)335(1)(2)(5) CWR11M(6)475(1)(2)(5) CWR11M(6)685(1)(2)(5) 0.0 0.1 0.1 0.1 0.2 0.2 0.4 0.5 0.8 1.2 1.6 2.4 4.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 6.0 24.0 21.0 18.0 15.0 10.0 8.0 6.5 4.5 3.5 2.5 1.5 1.3 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50 50 50 50 50 50 50 50 50 50 50 VDC 105ºC 0.1 0.15 0.22 0.33 0.47 0.68 1 1.5 2.2 3.3 4.7 µF 120Hz A/3216-18 B/3528-20 B/3528-20 B/3528-20 C/6032-28 C/6032-28 C/6032-28 D/7343-31 D/7343-31 D/7343-31 D/7343-31 T492A104(1)050(2)(3)(4) T492B154(1)050(2)(3)(4) T492B224(1)050(2)(3)(4) T492B334(1)050(2)(3)(4) T492C474(1)050(2)(3)(4) T492C684(1)050(2)(3)(4) T492C105(1)050(2)(3)(4) T492D155(1)050(2)(3)(4) T492D225(1)050(2)(3)(4) T492D335(1)050(2)(3)(4) T492D475(1)050(2)(3)(4) (see below for part options) CWR11N(6)104(1)(2)(5) CWR11N(6)154(1)(2)(5) CWR11N(6)224(1)(2)(5) CWR11N(6)334(1)(2)(5) CWR11N(6)474(1)(2)(5) CWR11N(6)684(1)(2)(5) CWR11N(6)105(1)(2)(5) CWR11N(6)155(1)(2)(5) CWR11N(6)225(1)(2)(5) CWR11N(6)335(1)(2)(5) CWR11N(6)475(1)(2)(5) (see below for part options) 0.1 0.1 0.1 0.2 0.2 0.3 0.5 0.8 1.1 1.7 2.4 µAmps +20ºC 6.0 4.0 4.0 4.0 4.0 4.0 4.0 6.0 6.0 6.0 6.0 % Max +20ºC 22.0 17.0 14.0 12.0 8.0 7.0 6.0 4.0 2.5 2.0 1.5 mOhms +20ºC 100kHz 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 J-STD-020A Temp≤260ºC Rated Voltage Rated Cap KEMET Part Number Mil-C-55365/4F Part Number DC Leakage DF ESR Moisture Sensitivity KEMET/EIA KEMET/EIA Case Code/ Case Size DF Moisture Sensitivity ESR +20ºC 120Hz +20ºC 100kHz % Max mOhms 4.0 14.0 4.0 7.5 4.0 6.5 6.0 6.5 6.0 3.5 6.0 3.5 6.0 2.5 6.0 1.4 6.0 1.2 6.0 1.0 Temp≤260ºC J-STD-020D 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 T 492 D 156 K 020 A C 4251 Capacitor Class Series Case Size Capacitance Code (pF) Capacitance Tolerance Voltage Failure Rate/Design Lead Material Surge (C-Spec) T= CWR 11 Tantalum Established Reliability A = 3216-18 First two digits B = 3258-19 represent significant C = 6032-25 figures. Third digit D = 7343-31 specifies number of zeros. J = ±5% K = ±10% M = ±20% 006 = 6.3V 010 = 10V 015 = 15V 020 = 20V Other part number options: 025 = 25V Where the 10th character equal to K (10% tolerance) is also available in M (20% tolerance). 035 = 35V 050 = 50V Where the 10th character equal to M (20% tolerance) is only available in M (20% tolerance). A = N/A C = Hot Solder Dipped B = 0.1%/1000 hrs H = Standard Solder C = .01%/1000 hrs Coated (SnPb 5% Pb D = .001%/1000 hrs minimum) B = Gold Plated K = Solder Fused 4250= 25C after Weibull 4251 = -55C and 85C after Weibull 4252 = -55C and 85C before Weibull Standard with tin terminations (14th character = T). Tin/lead terminations is also available (14th character = H) Also available on large (13 inch) reels. Add 7280 to the end of the part number. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Roll Over for Order Info. T2006-1 • 10/11/2010 6 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Recommended Voltage Derating Guidelines 120% % Working Voltage 100% 80% % Change in Working DC Voltage with Temperature 60% 40% Recommended Maximum Application Voltage (As % of Rated Voltage) 20% 0% 67% -55 25 33% 85 Temperature (ºC) 125 Ripple Current/Ripple Voltage Case Code KEMET A B C D X E R S T U V T510X T510E EIA 3216-18 3528-21 6032-28 7343-31 7343-43 7260-38 2012-12 3216-12 3528-12 6032-15 7343-20 7343-43 7260-38 Maximum Power Dissipation (Pmax) mWatts @ 25°C w/+20°C Rise 75 85 110 150 165 200 25 60 70 90 125 270 285 Temperature Compenstion Multipliers for Maximum Power Dissipation ≤25°C 85°C 1.00 0.90 T= Environmental Temperature 125°C 0.40 Using the P max of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = √P max/R E(max) = √P max*R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation(watts) R = ESR at specified frequency (ohms) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 7 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Reverse Voltage Solid tantalum capacitors are polar devices and may be permanently damaged or destroyed if connected with the wrong polarity. The positive terminal is identified on the capacitor body by a stripe plus in some cases a beveled edge. A small degree of transient reverse voltage is permissible for short periods per the table. The capacitors should not be operated continuously in reverse mode, even within these limits. Temperature Permissible Transient Reverse Voltage 25° C 85° C 125° C 15% of Rated Voltage 5% of Rated Voltage 1% of Rated Voltage Table 2 – Land Dimensions/Courtyard KEMET Metric Size Code Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA X Y C V1 V2 X Y C V1 V2 X Y C V1 V2 A 3216-18 1.35 2.15 1.45 6.10 2.80 1.25 1.75 1.35 5.00 2.30 1.15 1.35 1.25 4.10 2.00 B 3258-19 2.35 2.15 1.45 6.10 4.00 2.25 1.75 1.35 5.00 3.50 2.15 1.35 1.25 4.10 3.20 C 6032-25 2.35 2.65 2.60 8.90 4.40 2.25 2.25 2.50 7.80 3.90 2.15 1.85 2.40 6.90 3.60 D 7343-31 2.55 3.75 2.70 10.20 5.50 2.45 3.35 2.60 9.10 5.00 2.35 2.95 2.50 8.20 4.70 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component desity product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). ¹ Height of these chips may create problems in wave soldering. ² Land pattern geometry is too small for silkscreen outline. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 8 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Soldering Process T tP Max Ramp Up Rate = 3° C/sec Max Ramp Down Rate = 6° C/sec tL Temperature P KEMET’s families of surface mount tantalum capacitors are compatible with wave (single or dual), convection, IR or vapor TL phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's Tsmax recommended profile conditions for convection and IR reflow reflect Tsmin the profile conditions of the IPC/J-STD-020D standard for moisture sensitivety testing. The devices can safely withstand a maximum of three reflow passes at these conditions. 25 Note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3mm maximum) dictates care in wave process development. Profile Feature Sn-Pb Assembly Pb-Free Assembly tS 25° C to Peak Time Time/Temperature Soldering Profile Preheat/Soak Temperature Min (TSmin) 100°C 150°C Temperature Max (TSmax) 150°C 200°C Time (ts) from Tsmin to Tsmax) 60-120 sec 60-120 sec Ramp-up rate (TL to TP) 3°C/sec max 3°C/sec max Liquidous temperature (TL) 183°C 217°C Time above liquidous (tL) 60-150 sec 220°C* 235°C** 60-150 sec 250°C* 260°C** 20 sec max 30 sec max Peak Temperature (TP) Time within 5°C of max peak temperature (tP) Ramp-down rate (TP to TL) 6°C/sec max 6°C/sec max Time 25°C to peak temperature 6 minutes max 8 minutes max Note 1: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * Case Size D, E, P, Y and X **Case Size A, B, C, H, I, K, M, R, S, T, U, V, W and Z Construction MNO2 /Ta2O5/Ta Silver Adhesive Silver Paint Washer Leadframe (-Cathode) Leadframe (+Anode) Carbon Tantalum Wire Weld © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 9 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Capacitor Marking KEMET CWR 11 Style Rated Voltage J 156 25 K 030 Polarity Indicator (+) Picofarad Code KEMET ID PWC* * 010 = 30th week of 2010 Storage Tantalum chip capacitors should be stored in normal working environments. While the chips themselves are quite robust in other environments, solderability will be degraded by exposure to high temperatures, high humidity, corrosive atmospheres, and long term storage. In addition, packaging materials will be degraded by high temperature - reels may soften or warp, and tape peel force may increase. KEMET recommends that maximum storage temperature not exceed 40 degrees C, and maximum storage humidity not exceed 60% relative humidity. In addition, temperature fluctuations should be minimized to avoid condensation on the parts, and atmospheres should be free of chlorine and sulphur bearing compounds. For optimized solderability, chip stock should be used promptly, preferably within three years of receipt. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 10 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Tape & Reel Packaging Information KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Table 4 – Packaging Quantity Case Code KEMET R I S T M U L W Z V A B C D Y X E EIA 2012-12 3216-10 3216-12 3528-12 3528-15 6032-15 6032-19 7343-15 7343-17 7343-20 3216-18 3528-21 6032-28 7343-31 7343-40 7343-43 7260-38 Tape Width-mm 7" Reel* 13" Reel* 8 8 8 8 8 12 12 12 12 12 8 8 12 12 12 12 12 2,500 3,000 2,500 2,500 2,000 1,000 1,000 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 10,000 12,000 10,000 10,000 8,000 5,000 5,000 3,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 11 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Figure 1 – Embossed (Plastic) Carrier Tape Dimensions P2 T T2 ØDo Po [10 pitches cumulative tolerance on tape ±0.2 mm] E1 Ao F Ko B1 E2 Bo S1 W P1 T1 Center Lines of Cavity ØD 1 Cover Tape B 1 is for tape feeder reference only, including draft concentric about B o. Embossment For cavity size, see Note 1 Table 5 User Direction of Unreeling Table 5 – Embossed (Plastic) Carrier Tape Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size D0 8mm 12mm 1.5 +0.10/-0.0 (0.059 +0.004/-0.0) 16mm D1 Min. Note 1 1.0 (0.039) 1.5 (0.059) E1 P0 P2 1.75 ± 0.10 (0.069 ± 0.004) 4.0 ± 0.10 (0.157 ± 0.004) 2.0 ± 0.05 (0.079 ± 0.002) R Ref. Note 2 25.0 (0.984) 30 (1.181) S1 Min. Note 3 T Max. T1 Max. 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions — Millimeters (Inches) Tape Size Pitch 8mm Single (4mm) 12mm Single (4mm) & Double (8mm) 16mm Triple (12mm) B1 Max. Note 4 4.35 (0.171) 8.2 (0.323) 12.1 (0.476) E2 Min. F P1 T2 Max W Max A0,B0 & K0 6.25 (0.246) 10.25 (0.404) 14.25 (0.561) 3.5 ± 0.05 (0.138 ± 0.002) 5.5 ± 0.05 (0.217 ± 0.002) 5.5 ± 0.05 (0.217 ± 0.002) 4.0 ± 0.10 (0.157 ± 0.004) 8.0 ± 0.10 (0.315 ± 0.004) 8.0 ± 0.10 (0.315 ± 0.004) 2.5 (0.098) 4.6 (0.181) 4.6 (0.181) 8.3 (0.327) 12.3 (0.484) 16.3 (0.642) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape with or without components shall pass around R without damage (see Figure 5). 3. If S1<1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Document 481 paragraph 4.3 (b)). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20° maximum for 8 and 12mm tapes and 10° maximum for 16mm tapes (see Figure 3). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8mm and 12mm wide tape and to 1.0mm maximum for 16mm tape (see Figure 4). (e) for KPS Series product A0 and B0 are measured on a plane 0.3mm above the bottom of the pocket. (f) see Addendum in EIA Document 481 for standards relating to more precise taping requirements. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 12 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8mm 12mm & 16mm 0.1 Newton to 1.0 Newton (10gf to 100gf) 0.1 Newton to 1.3 Newton (10gf to 130gf) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165° to 180° from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300±10 mm/minute. 3. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556 and EIA-624. Figure 3 – Maximum Component Rotation ° T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8,12 16-200 Bo Maximum Rotation ( 20 10 ° T) Typical Component Centerline Ao ° s Tape Width (mm) 8,12 16-56 72-200 Maximum Rotation ( 20 10 5 ° S) Figure 4 – Maximum Lateral Movement 8mm & 12mm Tape 16mm Tape 0.5 mm maximum 0.5 mm maximum 1.0 mm maximum 1.0 mm maximum Figure 5 – Bending Radius Embossed Carrier R Punched Carrier Bending Radius R © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 13 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Figure 6 – Reel Dimensions Full Radius, See Note W3 (Includes Access Hole at Slot Location (Ø 40 mm min.) flange distortion at outer edge) W2 (Measured at hub) D A (See Note) N C (Arbor hole diameter) B (see Note) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm min. width x 10.0 mm min. depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 7 – Reel Dimensions Metric will govern Constant Dimensions — Millimeters (Inches) Tape Size A B Min C D Min 8mm 178 ± 0.20 (7.008 ± 0.008) or 330 ± 0.20 (13.000 ± 0.008) 1.5 (0.059) 13.0 +0.5/-0.2 (0.521 +0.02/-0.008) 20.2 (0.795) 12mm 16mm Variable Dimensions — Millimeters (Inches) Tape Size N Min 8mm 12mm 16mm 50 (1.969) W1 8.4 +1.5/-0.0 (0.331 +0.059/-0.0) 12.4 +2.0/-0.0 (0.488 +0.078/-0.0) 16.4 +2.0/-0.0 (0.646 +0.078/-0.0) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com W2 Max 14.4 (0.567) 18.4 (0.724) 22.4 (0.882) W3 Shall accommodate tape width without interference T2006-1 • 10/11/2010 14 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Figure 7 – Tape Leader & Trailer Dimensions Embossed Carrier Carrier Tape Punched Carrier 8 mm & 12 mm only Round Sprocket Holes END START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum, Components 100 mm Min. Leader 400 mm Minimum, Top Cover Tape Figure 8 – Maximum Camber Elongated sprocket holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 15 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 Other KEMET Resources Tools Resource Location Configure A Part: CapEdge http://capacitoredge.kemet.com SPICE & FIT Software http://www.kemet.com/spice Search Our FAQs: KnowledgeEdge http://www.kemet.com/keask Product Information Resource Location Products Technical Resources (Including Soldering Techniques) RoHS Statement Quality Documents http://www.kemet.com/products http://www.kemet.com/technicalpapers http://www.kemet.com/rohs http://www.kemet.com/qualitydocuments Product Request Resource Location Sample Request Engineering Kit Request http://www.kemet.com/sample http://www.kemet.com/kits Contact Resource Location Website Contact Us Investor Relations www.kemet.com http://www.kemet.com/contact http://www.kemet.com/ir Call Us 1-877-MyKEMET Twitter http://twitter.com/kemetcapacitors Disclaimer All product specifications, statements, information and data (collectively, the “Information”) are subject to change without notice. All Information given herein is believed to be accurate and reliable, but is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained. Although we design and manufacture our products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated or that other measures may not be required. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 16 MIL-PRF (CWR Style) Established Reliability – T492 CWR11 Style Mil-PRF-55365/8 KEMET Corporation World Headquarters Europe Asia 2835 KEMET Way Simpsonville, SC 29681 Southern Europe Geneva, Switzerland Tel: 41-22-715-0100 Northeast Asia Paris, France Tel: 33-1-4646-1009 Shenzhen, China Tel: 86-755-2518-1306 Sasso Marconi, Italy Tel: 39-051-939111 Beijing, China Tel: 86-10-5829-1711 Milan, Italy Tel: 39-02-57518176 Shanghai, China Tel: 86-21-6447-0707 Fort Lauderdale, FL Tel: 954-766-2800 Rome, Italy Tel: 39-06-23231718 Taipei, Taiwan Tel: 886-2-27528585 North America Madrid, Spain Tel: 34-91-804-4303 Southeast Asia Mailing Address: P.O. Box 5928 Greenville, SC 29606 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Corporate Offices Southeast Lake Mary, FL Tel: 407-855-8886 Northeast Wilmington, MA Tel: 978-658-1663 West Chester, PA Tel: 610-692-4642 Central Europe Hong Kong Tel: 852-2305-1168 Singapore Tel: 65-6586-1900 Landsberg, Germany Tel: 49-8191-3350800 Penang, Malaysia Tel: 60-4-6430200 Dortmund, Germany Tel: 49-2307-3619672 Bangalore, India Tel: 91-806-53-76817 Kwidzyn, Poland Tel: 48-55-279-7025 Central Schaumburg, IL Tel: 847-882-3590 Carmel, IN Tel: 317-706-6742 West Milpitas, CA Tel: 408-433-9950 Mexico Zapopan, Jalisco Tel: 52-33-3123-2141 Northern Europe Bishop’s Stortford, United Kingdom Tel: 44-1279-757201 Weymouth, United Kingdom Tel: 44-1305-830747 Coatbridge, Scotland Tel: 44-1236-434455 Färjestaden, Sweden Tel: 46-485-563934 Espoo, Finland Tel: 358-9-5406-5000 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com T2006-1 • 10/11/2010 17