Product Bulletin T528 Series - I, M, Z Case Sizes - Face Down Termination Tantalum Surface Mount Capacitor Features Polymer Cathode Technology 100% Accelerated Steady State Aging Low ESL <0.7nH @ 20 MHz 100% Surge Current Testing High Frequency Cap Retention Self-Healing Mechanism Non-Ignition Failure Mode Improved Volumetric Efficiency Capacitance: 33 - 470μF Use up to 90% VR Voltage (VR): 2.5V - 10V RoHS Compliant 105°C Maximum Temperature Capability Lead Free 260°C Reflow Capable Outline Drawing S2 S2 Dimensions – Millimeters KEMET EIA Size Code L Length W Width H Height Max. F S1 LF Width Cathode ± 0.2 ± 0.2 S2 Anode ± 0.2 I 3216-10 3.2 ± 0.20 1.6 ± 0.20 1.0 1.2 1.0 0.7 M 3528-15 3.5 ± 0.20 2.8 ± 0.20 1.5 2.0 1.2 0.6 Z 7343-17 7.3 ± 0.40 4.3 ± 0.30 1.7 2.8 5.1 1.3 F-9074B 06/07 T528 Ratings & Part Number Reference Capacitance μF Case Size KEMET Part Number DC Leakage μA @ 25°C Max DF% @ 25°C 120 Hz Max Ω ESR mΩ @ 25°C 100 kHz Max Ripple Current (Arms) 100 kHz Max ΔT= 20°C w/Δ @ -55°C to 85°C ΔT= 2°C w/Δ @ 105°C 2.5 Volt Rating at 105°C 330.0 330.0 470.0 470.0 Z Z Z Z 100.0 100.0 330.0 330.0 I I M M 68.0 68.0 220.0 220.0 220.0 220.0 330.0 330.0 I I M M Z Z Z Z 47.0 47.0 150.0 150.0 150.0 150.0 220.0 220.0 I I M M Z Z Z Z 33.0 33.0 100.0 100.0 I I M M T528Z337M2R5ATE009 83.0 T528Z337M2R5ATE012 83.0 T528Z477M2R5ATE009 118.0 T528Z477M2R5ATE012 118.0 3 Volt Rating at 105°C T528I107M003ATE150 30.0 T528I107M003ATE200 30.0 T528M337M003ATE150 99.0 T528M337M003ATE200 99.0 4 Volt Rating at 105°C T528I686M004ATE150 27.2 T528I686M004ATE200 27.2 T528M227M004ATE150 88.0 T528M227M004ATE200 88.0 T528Z227M004ATE009 88.0 T528Z227M004ATE012 88.0 T528Z337M004ATE009 132.0 T528Z337M004ATE012 132.0 6.3 Volt Rating at 105°C T528I476M006ATE150 29.6 T528I476M006ATE200 33.0 T528M157M006ATE150 94.5 T528M157M006ATE200 94.5 T528Z157M006ATE009 94.5 T528Z157M006ATE012 94.5 T528Z227M006ATE009 138.6 T528Z227M006ATE012 138.6 10 Volt Rating at 105°C T528I336M010ATE150 33.0 T528I336M010ATE200 33.0 T528M107M010ATE150 100.0 T528M107M010ATE200 100.0 10.0 10.0 10.0 10.0 9 12* 9 12 6.0 5.2 6.0 5.2 1.9 1.6 1.9 1.6 10.0 10.0 10.0 10.0 150 200 150 200 0.8 0.7 1.2 1.0 0.2 0.2 0.4 0.3 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 150 200 150 200 9 12 9 12 0.8 0.7 1.2 1.0 6.0 5.2 6.0 5.2 0.2 0.2 0.4 0.3 1.9 1.6 1.9 1.6 10.0 10.0 10.0 10.0 10.0 10.0 10.0 10.0 150 200 150 150 9 12 9 12 0.8 0.7 1.2 1.0 6.0 5.2 6.0 5.2 0.2 0.2 0.4 0.3 1.9 1.6 1.9 1.6 10.0 10.0 10.0 10.0 150 200 150 200 0.8 0.7 1.2 1.0 0.2 0.2 0.4 0.3 * ESR specification: 10 mOhms ±20% Ordering Information T 528 Tantalum Series 528 - Face Down Organic (FDO) Case Size I, M, Z Capacitance Picofarad Code First two digits represent significant figures. Third digit specifies number of zeros to follow. Capacitance Tolerance M = ±20% Z 337 M 2R5 A T E012 ESR Suffix 012 = 12 mOhms max Lead Material T = 100% Tin Failure Rate A = Not Applicable Voltage 2R5 = 2 1/2 volts Component Marking - I & M Case Component Marking - Z Case (FDO) Face-Down Organic Rated Voltage (FD) Face-Down Polarity Indicator (+) (Solid Stripe) FDO 337 2R5K 720 337 3K 720 Picofarad Code Rated Voltage KEMET ID Polarity Indicator (+) (Solid Stripe) FD Print Week Code 1st Digit = Year 2nd & 3rd Digits = Week “720” = 20th Week of 2007 Picofarad Code KEMET ID Print Week Code 1st Digit = Year 2nd & 3rd Digits = Week “720” = 20th Week of 2007 Component Packaging Case Code KEMET EIA Tape & Reel Dimensions Tape Width mm Pitch mm Part Reel Quantity 180mm 330mm (7” dia) (13” dia) Sprocket I 3216-10 8.0 ± 0.3 4.0 ± 0.1 4.0 ± 0.1 2,000 9,000 M 3528-15 8.0 ± 0.3 4.0 ± 0.1 4.0 ± 0.1 2,000 8,000 Z 7343-17 12.0 ± 0.3 8.0 ± 0.1 4.0 ± 0.1 1,000 3,000 Land Pattern Dimensions for Reflow Solder T528 Z Case Facedown 7343-17 will NOT fit on standard 7343 solder pads, and movement along Z axis could result in a short. Three-pad design must be used with center pad connection to circuit for low ESL properties. Dual pads on cathode connection required to prevent solder lifting with one cathode pad, and for mechanical hold. Will fit on Sanyo TPL pad specification - all dimensions equal except for 0.80mm tab extension at left cathode (-) plate as shown above. T528 I & M Case T528I & M Pad Dimensions (mm) Case Z G X Y1 (ref) Y2 (ref) C (ref) 528I 3.25 1.65 1.10 0.80 0.80 2.45 528M 4.30 1.30 2.40 1.20 1.80 2.80 In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors. The information in this bulletin supplements that in the catalog. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com