TA48015,018,025,033,05,08,09BF TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA48015BF,TA48018BF,TA48025BF, TA48033BF,TA4805BF,TA4808BF,TA4809BF 1 A Three-Terminal Low-Dropout Voltage Regulator The TA48***BF series consists of fixed-positive-output, low-dropout regulators with an output current of 1 A (max) that utilize V-PNP transistors for the output stage. In response to the need for low-voltage and low-power dissipation devices for use in consumer electronics and industrial appliances, the series offers devices with low output voltages:1.5 V, 1.8 V, 2.5 V, 3.3 V, 5 V, 8 V, 9 V Features • Maximum output current: 1 A • Low output voltage • Output voltage accuracy: VOUT ± 3% (@Tj = 25°C) • Low standby current: 850 μA (typ.) (@IOUT = 0 A) • Low starting quiescent current • Low-dropout voltage: VD = 0.5 V (max) (@IOUT = 0.5 A) (1.1V only for TA48015BF) COUT (reference): 2.2uF(multi-layer ceramic type) • : 1.5 / 1.8 / 2.5 / 3.3 / 5.0 / 8.0 / 9.0 V Weight HSOP3-P-2.30D : 0.36 g (typ.) • Protection function: Over current protection / Thermal shutdown / SOA • Package type: Surface-mount New PW-Mold Pin Assignment Marking side 1 IN 3 2 GND OUT Marking TA48***BF Series 3 48***BF Product No. (or abbreviation code) Lot No. 1 Note: 2 A line indicates lead (Pb)-free package or lead (Pb)-free finish. The “***” part of each product number varies according to the output voltage of the product. Be careful of static electricity when handling. How to Order Product No. TA48***BF (T6L1, NQ) Package Packing Type and Unit for Orders New PW-MOLD: Surface-mount 1 Tape (2000 pcs/reel) 2007-06-25 TA48015,018,025,033,05,08,09BF Block Diagram IN 1 Over current protection Constant current circuit Reference OUT 2 voltage circuit Thermal shutdown circuit GND 3 Absolute Maximum Ratings (Ta = 25°C) Characteristic Symbol Rating Unit Input voltage VIN 16 V Output current IOUT 1 A Operating junction temperature Tj(opr) -40~150 °C Junction temperature Tj 150 °C Storage temperature Tstg −55~150 °C Power dissipation Ta = 25°C 1 PD Tc= 25°C W 10 Note 1: Do not apply external current and voltage (including negative voltage) to non-specified pins. Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Thermal Characteristics Characteristic Symbol Max Unit Thermal resistance, junction to ambient R th (j−a) 125 ℃/ W Thermal resistance, junction to case R th (j−c) 12.5 ℃/ W Protection Function (reference) Characteristics Thermal shutdown Thermal shutdown hysteresis width Symbol TSD TSD(hys) Peak circuit current IPEAK Short circuit current ISC Test Condition Min Typ. Max Unit 150 175 ⎯ °C ⎯ 20 ⎯ °C VIN = VOUT + 2 V, Tj = 25°C ⎯ 1.7 ⎯ VIN = 12 V, Tj = 25°C ⎯ 1.8 ⎯ VIN = VOUT + 2 V, Tj = 25°C ⎯ 1.2 ⎯ VIN = 12 V, Tj = 25°C ⎯ 1.3 ⎯ VIN = 3.4 V (015∼018BF) / 3.5 V (025BF) 4.3 V (033BF) / 6.0 V (05BF) / 9.0 V (08BF) / 10.0 V (09BF) A A Note 3: Ensure that the devices operate within the limits of the maximum rating when in actual use. 2 2007-06-25 TA48015,018,025,033,05,08,09BF TA48015BF Electrical Characteristics (CIN = 0.33 μF, COUT = 2.2 μF, Tj = 25°C, unless otherwise specified) Characteristics Symbol Test Conditions Min Typ. Max VIN = 3.5 V, IOUT = 0.5 A 1.455 1.500 1.545 3.4 V < = 5 mA < = 1.44 1.50 1.56 Unit V Output voltage VOUT Line regulation Reg･line 3.4 V < = VIN < = 6.5 V, IOUT = 0.5 A ⎯ 4.5 20.0 mV Load regulation Reg･load VIN = 3.5 V, 5 mA < = IOUT < =1A ⎯ 2 20 mV 3.4 V < = VIN < = 6.5 V, IOUT = 0 A ⎯ 0.85 1.70 3.4 V < = VIN < = 6.5 V, IOUT = 1 A ⎯ 10 20 VIN = 2.1 V, IOUT = 0 A ⎯ 0.7 2.3 VIN = 3.4 V, IOUT = 1 A ⎯ 13.0 28.5 Quiescent current Starting quiescent current IB IBstart VIN < = 6.5 V, IOUT < = 1 A, 0°C < = Tj < = 125°C mA mA Output noise voltage VNO VIN = 3.5 V, IOUT = 50 mA, 10 Hz < =f< = 100 kHz ⎯ 75 ⎯ μVrms Ripple rejection R.R. 3.5 V < = VIN < = 6.5 V, IOUT = 50 mA, f = 120 Hz 54 65 ⎯ dB Dropout voltage VD IOUT = 0.5 A ⎯ 0.95 1.10 IOUT = 1 A ⎯ 1.9 ⎯ VIN = 3.5 V, IOUT = 5 mA, 0°C < = Tj < = 125°C ⎯ 0.14 ⎯ mV/°C Min Typ. Max Unit VIN = 3.8 V, IOUT = 0.5 A 1.746 1.800 1.854 3.4 V < = VIN < = 6.8 V, 5 mA < = IOUT < = 1 A, 0°C < = Tj < = 125°C 1.728 1.800 1.872 Average temperature coefficient of output voltage TCVO V TA48018BF Electrical Characteristics (CIN = 0.33 μF, COUT = 2.2 μF, Tj = 25°C, unless otherwise specified) Characteristics Symbol Test Conditions V Output voltage VOUT Line regulation Reg･line 3.4 V < = VIN < = 6.8 V, IOUT = 0.5 A ⎯ 5.6 20.0 mV Reg･load VIN = 3.8 V, 5 mA < = IOUT < =1A ⎯ 2.4 20.0 mV 3.4 V < = VIN < = 6.8 V, IOUT = 0 A ⎯ 0.85 1.70 3.4 V < = VIN < = 6.8 V, IOUT = 1 A ⎯ 10 20 VIN = 2.1 V, IOUT = 0 A ⎯ 0.7 2.3 VIN = 3.4 V, IOUT = 1 A ⎯ 14.0 28.5 Load regulation Quiescent current Starting quiescent current IB IBstart mA mA Output noise voltage VNO VIN = 3.8 V, IOUT = 50 mA, 10 Hz < =f< = 100 kHz ⎯ 75 ⎯ μVrms Ripple rejection R.R. 3.4 V < = VIN < = 6.8 V, IOUT = 50 mA, f = 120 Hz 54 66 ⎯ dB Dropout voltage VD IOUT = 0.5 A ⎯ 0.41 0.50 IOUT = 1 A ⎯ 1.6 ⎯ VIN = 3.8 V, IOUT = 5 mA, 0°C < = Tj < = 125°C ⎯ 0.15 ⎯ Average temperature coefficient of output voltage TCVO 3 V mV/°C 2007-06-25 TA48015,018,025,033,05,08,09BF TA48025BF Electrical Characteristics (CIN = 0.33 μF, COUT = 2.2 μF, Tj = 25°C, unless otherwise specified) Characteristics Symbol Test Conditions VIN = 4.5 V, IOUT = 0.5 A Unit 2.500 2.575 2.4 2.5 2.6 Reg･line 3.5 V < = VIN < = 7.5 V, IOUT = 0.5 A ⎯ 6.7 20.0 mV Reg･load VIN = 4.5 V, 5 mA < = IOUT < =1A ⎯ 2.9 20.0 mV 3.5 V < = VIN < = 7.5 V, IOUT = 0 A ⎯ 0.85 1.70 3.5 V < = VIN < = 7.5 V, IOUT = 1 A ⎯ 10 20 VIN = 2.1 V, IOUT = 0 A ⎯ 2.2 3.5 VIN = 3.4 V, IOUT = 1 A ⎯ 16.0 28.5 Line regulation Starting quiescent current Max 2.425 VOUT Quiescent current Typ. 3.5 V < = VIN < = 7.5 V, 5 mA < = IOUT < = 1 A, 0°C < = Tj < = 125°C Output voltage Load regulation Min IB IBstart V mA mA Output noise voltage VNO VIN = 4.5 V, IOUT = 50 mA, 10 Hz < =f< = 100 kHz ⎯ 95 ⎯ μVrms Ripple rejection R.R. 3.5 V < = VIN < = 7.5 V, IOUT = 50 mA, f = 120 Hz 52 64 ⎯ dB Dropout voltage VD IOUT = 0.5 A ⎯ 0.32 0.50 IOUT = 1 A ⎯ 0.88 ⎯ VIN = 4.5 V, IOUT = 5 mA, 0°C < = Tj < = 125°C ⎯ 0.2 ⎯ mV/°C Min Typ. Max Unit VIN = 5.3 V, IOUT = 0.5 A 3.201 3.300 3.399 4.3 V < = VIN < = 8.8 V, 5 mA < = IOUT < = 1 A, 0°C < = Tj < = 125°C 3.168 3.300 3.432 Average temperature coefficient of output voltage TCVO V TA48033BF Electrical Characteristics (CIN = 0.33 μF, COUT = 2.2 μF, Tj = 25°C, unless otherwise specified) Characteristics Symbol Test Conditions V Output voltage VOUT Line regulation Reg･line 4.3 V < = VIN < = 8.8 V, IOUT = 0.5 A ⎯ 8.3 20.0 mV Load regulation Reg･load VIN = 5.3 V, 5 mA < = IOUT < =1A ⎯ 3.7 20.0 mV 4.3 V < = VIN < = 8.8 V, IOUT = 0 A ⎯ 0.85 1.70 4.3 V < = VIN < = 8.8 V, IOUT = 1 A ⎯ 10 20 VIN = 2.1 V, IOUT = 0 A ⎯ 3.3 4.0 VIN = 3.5 V, IOUT = 1 A ⎯ 17.0 28.5 Quiescent current Starting quiescent current IB IBstart mA mA Output noise voltage VNO VIN = 5.3 V, IOUT = 50 mA, 10 Hz < =f< = 100 kHz ⎯ 115 ⎯ μVrms Ripple rejection R.R. 4.3 V < = VIN < = 8.8 V, IOUT = 50 mA, f = 120 Hz 50 62 ⎯ dB Dropout voltage VD IOUT = 0.5 A ⎯ 0.32 0.50 IOUT = 1 A ⎯ 0.69 ⎯ VIN = 5.3 V, IOUT = 5 mA, 0°C < = Tj < = 125°C ⎯ 0.3 ⎯ Average temperature coefficient of output voltage TCVO 4 V mV/°C 2007-06-25 TA48015,018,025,033,05,08,09BF TA4805BF Electrical Characteristics (CIN = 0.33 μF, COUT = 2.2 μF, Tj = 25°C, unless otherwise specified) Characteristics Symbol Test Conditions Min Typ. Max VIN = 7 V, IOUT = 0.5 A 4.85 5.00 5.15 6V< = VIN < = 10 V, , 5 mA < = IOUT < = 1 A, 0°C < = Tj < = 125°C 4.8 5.0 5.2 Unit V Output voltage VOUT Line regulation Reg･line 6V< = VIN < = 10 V, IOUT = 0.5 A ⎯ 10 20 mV Reg･load VIN = 7 V, 5 mA < = IOUT < =1A ⎯ 4.2 20.0 mV 6V< = VIN < = 10 V, IOUT = 0 A ⎯ 0.85 1.70 6V< = VIN < = 10 V, IOUT = 1 A ⎯ 10 20 VIN = 2.1 V, IOUT = 0 A ⎯ 2.5 4.2 VIN = 4.5 V, IOUT = 1 A ⎯ 18.0 28.5 Load regulation Quiescent current Starting quiescent current IB IBstart mA mA Output n oise voltage VNO VIN = 7 V, IOUT = 50 mA, 10 Hz < =f< = 100 kHz ⎯ 150 ⎯ μVrms Ripple rejection R.R. 6V< = VIN < = 10 V, IOUT = 50 mA, f = 120 Hz 48 60 ⎯ dB Dropout voltage VD IOUT = 0.5 A ⎯ 0.32 0.50 IOUT = 1 A ⎯ 0.69 ⎯ VIN = 7 V, IOUT = 5 mA, 0°C < = Tj < = 125°C ⎯ 0.45 ⎯ mV/°C Min Typ. Max Unit VIN = 10 V, IOUT = 0.5 A 7.76 8.00 8.24 9V< = VIN < = 13 V, 5 mA < = IOUT < = 1 A, 0°C < = Tj < = 125°C 7.68 8.00 8.32 Average temperature coefficient of output voltage TCVO V TA4808BF Electrical Characteristics (CIN = 0.33 μF, COUT = 2.2 μF, Tj = 25°C, unless otherwise specified) Characteristics Symbol Test Conditions V Output voltage VOUT Line regulation Reg･line 9V< = VIN < = 13 V, IOUT = 0.5 A ⎯ 12.5 20.0 mV Load regulation Reg･load VIN = 10 V, 5 mA < = IOUT < =1A ⎯ 9.4 30.0 mV 9V< = VIN < = 13 V, IOUT = 0 A ⎯ 0.9 1.7 9V< = VIN < = 13 V, IOUT = 1 A ⎯ 10 20 VIN = 2.1 V, IOUT = 0 A ⎯ 2.6 4.4 VIN = 7.2 V, IOUT = 1 A ⎯ 20.0 28.5 Quiescent current Starting quiescent current IB IBstart mA mA Output noise voltage VNO VIN = 10 V, IOUT = 50 mA, 10 Hz < =f< = 100 kHz ⎯ 225 ⎯ μVrms Ripple rejection R.R. < 13 V, IOUT = 50 mA, 9V< = VIN = f = 120 Hz 45 56 ⎯ dB Dropout voltage VD IOUT = 0.5 A ⎯ 0.32 0.50 IOUT = 1 A ⎯ 0.69 ⎯ VIN = 10 V, IOUT = 5 mA, 0°C < = Tj < = 125°C ⎯ 0.7 ⎯ Average temperature coefficient of output voltage TCVO 5 V mV/°C 2007-06-25 TA48015,018,025,033,05,08,09BF TA4809BF Electrical Characteristics (CIN = 0.33 μF, COUT = 2.2 μF, Tj = 25°C, unless otherwise specified) Characteristics Symbol Test Conditions Min Typ. Max VIN = 11 V, IOUT = 0.5 A 8.73 9.00 9.27 10 V < = VIN < = 14 V, 5 mA < = IOUT < = 1 A, 0°C < = Tj < = 125°C 8.64 9.00 9.36 Unit V Output voltage VOUT Line regulation Reg･line 10 V < = VIN < = 14 V, IOUT = 0.5 A ⎯ 12.5 20.0 mV Reg･load VIN = 11 V, 5 mA < = IOUT < =1A ⎯ 9.4 30.0 mV 10 V < = VIN < = 14 V, IOUT = 0 A ⎯ 0.9 1.7 10 V < = VIN < = 14 V, IOUT = 1 A ⎯ 10 20 VIN = 2.1 V, IOUT = 0 A ⎯ 2.6 4.4 VIN = 8.2 V, IOUT = 1 A ⎯ 20.0 28.5 Load regulation Quiescent current Starting quiescent current IB IBstart mA mA Output noise voltage VNO VIN = 11 V, IOUT = 50 mA, 10 Hz < =f< = 100 kHz ⎯ 250 ⎯ μVrms Ripple rejection R.R. 10 V < = VIN < = 14 V, IOUT = 50 mA, f = 120 Hz 44 55 ⎯ dB Dropout voltage VD IOUT = 0.5 A ⎯ 0.32 0.50 IOUT = 1 A ⎯ 0.69 ⎯ VIN = 11 V, IOUT = 5 mA, 0°C < = Tj < = 125°C ⎯ 0.8 ⎯ Average temperature coefficient of output voltage TCVO 6 V mV/°C 2007-06-25 TA48015,018,025,033,05,08,09BF Electrical Characteristics for All Products • Tj = 25°C in the measurement conditions of each item is the standard condition when a pulse test is carried out, and any drift in the electrical characteristic due to a rise in the junction temperature of the chip may be disregarded. Standard Application Circuit VIN 1 TA48xxxBF CIN 0.33 μF 3 2 VOUT COUT 2.2 μF • Be sure to connect a capacitor near the input terminal and output terminal between both terminals and GND. The use of a monolithic ceramic capacitor (B Characteristic or X7R) of low ESR (equivalent series resistance) is recommended. The IC may oscillate due to external conditions (output current, temperature, or the type of the capacitor used). The type of capacitor required must be determined by the actual application circuit in which the IC is used. Precautions in application • The IC might be destroyed if a voltage greater than the input terminal voltage is applied to the output terminal, or if the input terminal is connected to GND during operation. To prevent such an occurrence, connect a diode as in the following diagram. VIN 1 TA48xxxBF 2 VOUT 3 7 2007-06-25 TA48015,018,025,033,05,08,09BF TA48***BF PDmax. – Ta VOUT – Tj 12 3.8 TA48033BF VIN = 5 V I OUT = 5 mA ceramic substrate 8 6 50 x 50 x 0.8 mmt 4 3.6 3.4 Output voltage PDmax. (W) Reflow soldering on a (V) Number of IC = 1 VOUT 10 30 x 30 x 0.8 mmt 2 3.2 3.0 Singl 0 0 20 40 60 80 100 Ambient temperature 120 Ta 140 2.8 −50 160 2 (V) 4 3 Output voltage 0.1 A 0 4 Input voltage 1 8 0 (V) 0.5 1.5 IOUT 2.0 (A ) I B – I OUT I B – VIN 20 (mA) TA48033BF Tj = 25 °C 12 TA48033BF VIN = 5 V Tj = 25 °C 16 IB 10 12 8 Quiescent current (mA) 1.0 Output current 14 IB (°C) 2 0 6 VIN Tj 150 TA48033BF VIN = 5 V Tj = 25 °C VOUT (V) VOUT Output voltage 0.5 A 1 0 100 VOUT – I OUT 3 2 50 5 TA48033BF Tj = 25 °C I OUT = 10 mA 0 Junction temperature (°C ) VOUT – VIN 4 Quiescent current Allowable power dissipation Condition: Ta = Tc 0.5 A 6 4 I OUT = 0 mA 0.1 A 2 0 8 4 10 mA 0 2 4 Input voltage 6 VIN 0 8 (V) 0 0.2 0.4 Output current 8 0.6 IOUT 0.8 1.0 (A ) 2007-06-25 TA48015,018,025,033,05,08,09BF I B – Tj TA48033BF VIN = 5 V I OUT = 0 A (V) TA48033BF Tj = 25 °C 1.2 Dropout voltage Quiescent current 0.6 VD 1.6 VD – I OUT 0.8 IB (mA) 2.0 0.8 0.4 0 −50 0 50 Junction temperature 100 Tj 0.4 0.2 0 150 0 (°C) 0.2 0.4 Output current I PEAK – Tj IOUT 1.0 0.8 (A ) I PEAK – VD 2.5 2.4 TA48033BF VIN = 5 V IPEAK (A) IPEAK (A) 0.6 2.0 2.0 1.6 Peak output current Peak output current 1.5 1.0 0.5 0 −50 0 50 Junction temperature 100 Tj 1.2 0.8 0.4 0 150 (°C) TA48033BF Tj = 25 °C 0 2 4 Dropout voltage 6 VD 8 (V) VD – Tj 1.0 Dropout voltage VD (V) TA48033BF 0.8 I OUT = 1 A 0.6 0.4 0.5 A 0.2 0.1 A 0 -50 0 50 Junction temperature 100 Tj 150 (°C) 9 2007-06-25 TA48015,018,025,033,05,08,09BF Package Dimensions (TA48xxxBF) HSOP-3-P-2.30D Unit : mm Weight: 0.36 g (typ.) 10 2007-06-25 TA48015,018,025,033,05,08,09BF RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 11 2007-06-25