T TRUMPower TC4W Series DC/DC CONVERTERS 4:1 Input, 10 Watt MODEL NUMBER OUTPUT VOLTAGE OUTPUT CURRENT OUTPUT POWER 9-36 VDC IN 3.3 VDC 5 VDC 12 VDC 15 VDC 2000 mA 2000 mA 830 mA 666 mA 6.6W 10W 10W 10W TC4W-7S243.3 TC4W-10S2405 TC4W-10S2412 TC4W-10S2415 TC4W-7S483.3 TC4W-10S4805 TC4W-10S4812 TC4W-10S4815 ±5 VDC ±12 VDC ±15 VDC ±1000 mA ±415 mA ±333 mA 10W 10W 10W TC4W-10D2405 TC4W-10D2412 TC4W-10D2415 TC4W-10D4805 TC4W-10D4812 TC4W-10D4815 18-72 VDC IN ELECTRICAL SPECIFICATIONS All Specifications Typical @+25°C, Nominal Line, and Full Load Unless Otherwise Noted. INPUT SPECIFICATIONS Nominal Line, 9-36V Input.................................24 VDC 18-72V Input...............................48 VDC Input Filter........................................................Pi Filter Reverse Voltage Protection............Internal Shunt Diode Use External Fuse OUTPUT SPECIFICATIONS Voltage Accuracy.......................................±1.0%, Max. Line Regulation..........................................±0.2%, Max. Load Regulation, FL-25%FL.......................±1.0%, Max. Minimum Load.........................................Not Required Ripple and Noise, 20MHz BW................75mVp-p, Max. Short Circuit Protection...............................Continuous GENERAL SPECIFICATIONS Efficiency.....................................................76% - 82% Isolation Voltage, Input to Output.............500 VDC, Min. Switching Frequency................................200 KHz, Typ. Operating Temperature Range...............-25°C to +71°C Case Temperature......................................100°C Max. Derating................................................................None Storage Temperature Range................-40°C to +100°C Cooling...........................................Free Air Convection EMI/RFI........................Six-Sided Shielded Metal Case Conducted EMI....Meets FCC Class A, EN55022 Class A Case Material..............Metal with Non-Conductive Base 1.00 (25.4) 0.40 (10.2) 0.40 (10.2) 0.22 (5.6) 0.10 (2.54) +OUT COM -OUT /NP* BOTTOM VIEW 2.00 (50.8) 0.80 (20.3) +IN -IN 0.60 (15.2) 0.20 (5.1) 0.60 (15.2) 0.40 (10.2) * NP (NO PIN) ON SINGLE OUTPUT MODELS PIN SIZE: 0.04 INCH (1.0 mm) DIA. ALL DIMENSIONS IN INCHES (mm) -01/2008- Tumbler Technologies + TRUMPower • Santa Clara, CA • 408-988-6616 • [email protected] • www.TRUMPower.com