TI TLC1078MJG

TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
D
D
D
D
D
D
D
D
D
D
D
Power Dissipation as Low as 10 µW Typ Per
Amplifier
Operates on a Single Silver-Oxide Watch
Battery, VDD = 1.4 V Min
VIO . . . 450 µV/850 µV Max in DIP and
Small-Outline Package (TLC1078/79)
Input Offset Voltage Drift . . . 0.1 µV/Month
Typ, Including the First 30 Days
High-impedance LinCMOS Inputs
IIB = 0.6 pA Typ
High Open-Loop Gain . . . 800000 Typ
Output Drive Capability > 20 mA
Slew Rate . . . 47 V/ms Typ
Common-Mode Input Voltage Range
Extends Below the Negative Rail
Output Voltage Range Includes Negative
Rail
On-Chip ESD-Protection Circuitry
Small-Outline Package Option Also
Available in Tape and Reel
TLC1078
D, JG, OR P PACKAGE
(TOP VIEW)
1OUT
1IN –
1IN+
GND
1
8
2
7
3
6
4
5
VDD
2OUT
2IN –
2IN+
NC
1IN –
NC
1IN+
NC
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
1
14
2
13
3
12
4
11
5
10
6
9
7
8
4OUT
4IN –
4IN+
GND
3IN+
3IN –
3OUT
NC
2OUT
NC
2IN –
NC
NC
GND
NC
2IN +
NC
The TLC107x operational amplifiers offer ultralow offset voltage, high gain, 110-kHz bandwidth,
47-V/ms slew rate, and just 150-µW power
dissipation per amplifier.
1IN –
1OUT
NC
4OUT
4IN –
TLC1079
FK PACKAGE
(TOP VIEW)
1IN+
NC
VDD
NC
2IN+
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
4IN+
NC
GND
NC
3IN+
2IN –
2OUT
NC
3OUT
3IN –
Since this device is functionally compatible as well
as pin compatible with the TLC27L2/4 and
TLC27L7/9, the TLC107x easily upgrades
existing designs that can benefit from its improved
performance.
1OUT
1IN –
1IN+
VDD
2IN+
2IN –
2OUT
TLC1078
FK PACKAGE
(TOP VIEW)
description
With a supply voltage of 1.4 V, common-mode
input to the negative rail, and output swing to the
negative rail, the TLC107xC is an ideal solution for
low-voltage battery-operated systems. The
20-mA output drive capability means that the
TLC107x can easily drive small resistive and large
capacitive loads when needed, while maintaining
ultra-low standby power dissipation.
TLC1079
D, J, OR N PACKAGE
(TOP VIEW)
NC
1OUT
NC
VDD
NC
D
NC – No internal connection
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
LinCMOS is a trademark of Texas Instruments Incorporated.
Copyright  1997, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
description (continued)
The TLC107x incorporates internal ESD-protection circuits that will prevent functional failures at voltages up
to 2000 V as tested under MIL-PRF-38535, Method 3015.2; however, care should be exercised when handling
these devices as exposure to ESD may result in degradation of the device parametric performance. The
TLC107x design also inhibits latch-up of the device inputs and outputs even with surge currents as large
100 mA.
The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterized
for operation from – 40°C to 85°C. The M-suffix devices are characterized for operation over the full military
temperature range of – 55°C to 125°C. The wide range of packaging options includes small-outline and
chip-carrier versions for high-density system applications.
AVAILABLE OPTIONS
PACKAGED DEVICES
TA
CHIP CARRIER
(FK)
CERAMIC DIP
(J)
CERAMIC DIP
(JG)
PLASTIC DIP
(N)
PLASTIC DIP
(P)
0°C to 70°C
TLC1078CD
TLC1079CD
—
—
—
TLC1079CN
TLC1078CP
TLC1078Y
TLC1079Y
– 40°C to 85°C
TLC1078ID
TLC1079ID
—
—
—
TLC1079IN
TLC1078IP
—
– 55°C to 125°C
TLC1078MD
TLC1079MD
TLC1078MFK
TLC1079MFK
TLC1079MJ
TLC1078MJG
TLC1079MN
TLC1078MP
—
† The D package is available taped and reeled. Add the suffix R to the device type (e.g., TLC1078CDR).
‡ Chip forms are tested 25°C only.
symbol (each amplifier)
–
IN –
OUT
+
IN +
2
CHIP
FORM‡
(Y)
SMALL OUTLINE†
(D)
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TLC1087Y chip information
This chip, when properly assembled, displays characteristics similar to the TLC1078C. Thermal compression
or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips can be mounted with
conductive epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS
(1)
(8)
(7)
1IN +
VDD
(8)
(3)
+
1OUT
(2)
–
1IN –
BONDING PAD ASSIGNMENTS
2IN +
(5)
+
2OUT
(6)
–
2IN –
(4)
VDD – /GND
83
(2)
(6)
CHIP THICKNESS: 15 MILS TYPICAL
BONDING PADS: 4 × 4 MILS MINIMUM
TJmax = 150°C
(3)
TOLERANCES ARE ± 10%.
(4)
(5)
ALL DIMENSIONS ARE IN MILS.
72
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TLC1079Y chip information
This chip, when properly assembled, display characteristics similar to the TLC1079C. Thermal compression
or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips can be mounted with
conductive epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS
(1)
(14)
1IN +
VDD
(4)
(3)
+
–
1IN –
2IN +
2IN –
(2)
(13)
3IN +
(1)
1OUT
(2)
(5)
+
(6)
(7)
2OUT
–
(10)
+
(8)
3OUT
(9)
–
3IN –
(12)
+
4IN +
(3)
(12)
4IN –
(14)
(13)
4OUT
–
(11)
130
(4)
(11)
(5)
(10)
(6)
(9)
VDD– /GND
CHIP THICKNESS: 15 MILS TYPICAL
BONDING PADS: 4 × 4 MILS MINIMUM
TJmax = 150°C
TOLERANCES ARE ± 10%.
ALL DIMENSIONS ARE IN MILS.
(8)
(7)
70
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PIN (11) IS INTERNALLY CONNECTED
TO BACKSIDE OF CHIP.
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
equivalent schematic (each amplifier)
VDD
Q3
Q6
R6
Q1
Q5
IN –
R4
R1
Q8
IN +
Q11
C1
R5
Q12
OUT
Q7
Q10
Q2
R2
Q4
D1
Q13
Q9
R3
D2
R7
GND
ACTUAL DEVICE COMPONENT COUNT
TLC1078
TLC1079
Transistors
COMPONENT
38
76
Resistors
16
32
Diodes
12
24
2
4
Capacitors
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VDD (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 V
Differential input voltage, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± VDD
Input voltage range, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 0.3 V to VDD
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 5 mA
Output current, IO (each output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 30 mA
Total current into VDD (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 mA
Duration of short-circuit at (or below) TA = 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total power dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . see Dissipation Rating Table
Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 85°C
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to network ground.
2. Differential voltages are at IN+ with respect to IN –.
3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation ratings are not exceeded.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
TA = 125°C
POWER RATING
D–8
725 mW
5.8 mW/°C
464 mW
377 mW
145 mW
D–14
950 mW
7.6 mW/°C
608 mW
494 mW
190 mW
FK
1375 mW
11.0 mW/°C
880 mW
715 mW
275 mW
J
1375 mW
11.0 mW/°C
880 mW
715 mW
275 mW
JG
1050 mW
8.4 mW/°C
672 mW
546 mW
210 mW
N
1150 mW
9.2 mW/°C
736 mW
598 mW
230 mW
P
1000 mW
8.0 mW/°C
640 mW
520 mW
200 mW
recommended operating conditions
Supply voltage, VDD
Common mode input voltage,
voltage VIC
Common-mode
VDD = 5 V
VDD = 10 V
Operating free-air temperature, TA
6
POST OFFICE BOX 655303
C SUFFIX
I SUFFIX
M SUFFIX
MIN
MAX
MIN
MAX
MIN
MAX
1.4
16
3
16
4
16
– 0.2
4
– 0.2
4
0
4
– 0.2
9
– 0.2
9
0
9
0
70
– 40
85
– 55
125
• DALLAS, TEXAS 75265
UNIT
V
V
°C
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
electrical characteristics at specified free-air temperature
TLC1078C
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of input
offset voltage
IIO
Input offset current (see Note 4)
IIB
Input bias current (see Note 4)
VICR
g
Common-mode input voltage
range (see Note 5)
VOH
VOL
AVD
CMRR
kSVR
IDD
High-level output voltage
Low-level output voltage
Large-signal
L
i
l differential
diff
ti l voltage
lt
am
lification
amplification
Common-mode rejection ratio
TEST
CONDITIONS
VO = 1.4 V,
RS = 50 Ω,
VIC = 0,
RI = 1 MΩ
160
180
0.1
70°C
7
25°C
0.6
70°C
40
25°C
– 0.2
to 4
Full range
– 0.2
to 3.5
VIC = VICRmin
450
800
25°C
RL= 1 MΩ,
MΩ
See Note 6
VO = VDD / 2,
VIC = VDD / 2,
N lload
No
d
25°C
1.1
VID = –100
100 mV,
V
IOL = 0
Supply current (two amplifiers)
VDD = 10 V
MIN
TYP MAX
25°C to 70°C
VID = 100 mV,
V
RL= 1 MΩ
VO = 1.4 V
VDD = 5 V
MIN
TYP MAX
Full range
VO = VDD / 2,,
VIC = VDD / 2
Supply-voltage
S
l
lt
rejection
j ti ratio
ti
(∆VDD/∆VIO)
TA†
600
950
0.1
7
300
0.7
600
– 0.3
to 4.2
50
–0.2
to 9
µV
µV/°C
1
300
UNIT
600
–0.3
to 9.2
pA
pA
V
– 0.2
to 8.5
V
25°C
3.2
4.1
8.2
8.9
0°C
3.2
4.1
8.2
8.9
70°C
3.2
4.2
8.2
8.9
V
25°C
0
25
0
25
0°C
0
25
0
25
70°C
0
25
0
25
25°C
250
525
500
850
0°C
250
680
500
1010
70°C
200
380
350
660
25°C
70
95
75
97
0°C
70
95
75
97
70°C
70
95
75
97
25°C
75
98
75
98
0°C
75
98
75
98
70°C
75
98
75
98
mV
V/mV
dB
dB
25°C
20
34
29
46
0°C
24
42
36
66
70°C
16
28
22
40
µA
† Full range is 0°C to 70°C.
NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically.
5. This range also applies to each input individually.
6. At VDD = 5 V. VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
electrical characteristics at specified free-air temperature
TLC1079C
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
IIO
Input offset current
(see Note 4)
IIB
Input bias current
(see Note 4)
VICR
Common mode input
voltage range (see Note 5)
VOH
VOL
AVD
CMRR
kSVR
IDD
High-level output voltage
Low-level output voltage
Large-signal
L
i
l diff
differential
ti l
voltage amplification
am lification
Common mode
C
d rejection
j ti
ratio
TEST CONDITIONS
VO = 1.4 V,
RS = 50 Ω,
VIC = 0,
RI = 1 MΩ
200
850
1200
25°C to
70°C
1.1
25°C
0.1
70°C
7
25°C
0.6
70°C
40
– 0.2
to 3.5
VIC = VICRmin
VO = VDD / 2,
2
VIC = VDD / 2, No load
190
Full range
See Note 6
Supply current (four
am
lifiers)
amplifiers)
25°C
– 0.2
to 4
VID = –100
100 mV,
V
IOL = 0
VDD = 5 V to
t 10 V,
V
VO = 1
1.4
4V
VDD = 10 V
MIN
TYP
MAX
25°C
VID = 100 mV,
V
RL = 1 MΩ
Supply-voltage
S
l
lt
rejection
j ti
ratio (∆VDD /∆VIO)
VDD = 5 V
MIN
TYP
MAX
Full range
VO = VDD / 2,,
VIC = VDD / 2
RL = 1 MΩ,
TA†
0.1
300
7
POST OFFICE BOX 655303
300
0.7
600
– 0.3
to 4.2
50
– 0.2
to 9
600
– 0.3
to 9.2
pA
pA
V
– 0.2
to 8.5
V
25°C
3.2
4.1
8.2
8.9
0°C
3.2
4.1
8.2
8.9
70°C
3.2
4.2
8.2
8.9
V
25°C
0
25
0
25
0°C
0
25
0
25
70°C
0
25
0
25
25°C
250
525
500
850
0°C
250
700
500
1010
70°C
200
380
350
660
25°C
70
95
75
97
0°C
70
95
75
97
70°C
70
95
75
97
25°C
75
98
75
98
0°C
75
98
75
98
70°C
75
98
75
98
mV
V/mV
dB
dB
25°C
40
68
57
92
0°C
48
84
72
132
70°C
31
56
44
80
• DALLAS, TEXAS 75265
µV
µV/°C
1
† Full range is 0°C to 70°C.
NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically.
5. This range also applies to each input individually.
6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V.
8
1150
1500
UNIT
µA
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
operating characteristics at specified free-air temperature
TLC1078C
PARAMETER
TEST CONDITIONS
SR
Slew rate at unity gain
RL = 1 MΩ,
MΩ
CL = 20 pF,
F
VI(PP) = 1 V,
V See Figure 1
Vn
Equivalent input noise voltage
f = 1 kHz,
RS = 20 Ω
B1
Unity-gain bandwidth
CL = 20 pF,
See Figure 2
φm
Phase margin at unity gain
CL = 20 pF,
See Figure 2
TA
VDD = 5 V
MIN
TYP
MAX
VDD = 10 V
MIN
TYP
MAX
25°C
32
47
0°C
35
51
70°C
27
38
25°C
68
68
25°C
85
110
0°C
100
125
70°C
65
90
25°C
34°
38°
0°C
36°
40°
70°C
30°
34°
UNIT
V/ms
nV/√Hz
kHz
operating characteristics at specified free-air temperature
TLC1079C
PARAMETER
TEST CONDITIONS
TA
VDD = 5 V
TYP
MAX
MIN
SR
Vn
B1
φm
Slew rate at unity gain
Equivalent input noise voltage
Unity-gain bandwidth
Phase margin at unity gain
RL = 1 MΩ,
MΩ
F
CL = 20 pF,
VI(PP) = 1 V,
V See Figure 1
f = 1 kHz,
CL = 20 pF,
CL = 20 pF,
RS = 20 Ω
See Figure 2
See Figure 2
POST OFFICE BOX 655303
VDD = 10 V
TYP
MAX
25°C
32
47
0°C
35
51
70°C
27
38
25°C
68
68
25°C
85
110
0°C
100
125
70°C
65
90
25°C
34°
38°
0°C
36°
40°
70°C
30°
34°
• DALLAS, TEXAS 75265
UNIT
MIN
V/ms
nV/√Hz
kHz
9
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
electrical characteristics at specified free-air temperature
TLC1078I
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of input
offset voltage
IIO
Input
In
ut offset current
(see Note 4)
IIB
Input bias current (see Note 4)
VICR
g
Common-mode input voltage
range (see Note 5)
VOH
VOL
AVD
CMRR
kSVR
IDD
High-level output voltage
Low-level output voltage
Large-signal
L
i
l differential
diff
ti l voltage
lt
amplification
am
lification
Common-mode rejection ratio
TEST
CONDITIONS
VO = 1.4
1 4 V,
V
RS = 50 Ω
Ω,
VIC = 0, RI = 1 MΩ
VDD = 5 V
MIN
TYP MAX
VDD = 10 V
MIN
TYP MAX
25°C
160
180
Full range
450
950
25°C to 85°C
1.1
25°C
0.1
85°C
24
VO = VDD / 2,,
VIC = VDD / 2
V
VID = 100 mV,
RL = 1 MΩ
TA†
25°C
0.6
85°C
200
25°C
– 0.2
to 4
Full range
– 0.2
to 3.5
0.1
1000
26
2000
220
1000
0.7
– 0.3
to 4.2
– 0.2
to 9
2000
– 0.3
to 9.2
– 0.2
to 8.5
25°C
3.2
4.1
8.2
8.9
– 40°C
3.2
4.1
8.2
8.9
85°C
3.2
4.2
8.2
8.9
V
0
25
0
25
– 40°C
0
25
0
25
85°C
0
25
0
25
RL = 1 MΩ ,
See Note 6
25°C
250
525
500
850
– 40°C
250
900
500
1550
85°C
150
300
250
585
VO = 1.4 V
Supply current (two amplifiers)
VO = VDD / 2,
VIC = VDD / 2,
N lload
No
d
25°C
70
95
75
97
– 40°C
70
95
75
97
85°C
70
95
75
97
25°C
75
98
75
98
– 40°C
75
98
75
98
85°C
75
98
75
98
dB
dB
25°C
20
34
29
46
31
54
50
86
85°C
15
26
20
36
• DALLAS, TEXAS 75265
mV
V/mV
– 40°C
POST OFFICE BOX 655303
pA
V
25°C
S
l
lt
j ti ratio
ti
Supply-voltage
rejection
(∆VDD /∆VIO)
pA
V
100 mV,
V
VID = –100
IOL = 0
VIC = VICRmin
µV
µV/°C
1
† Full range is – 40°C to 80°C.
NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically.
5. This range also applies to each input individually.
6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V.
10
600
1100
UNIT
µA
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
electrical characteristics at specified free-air temperature
TLC1079I
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
(see Note 4)
IIB
Input bias current
(see Note 4)
VICR
Common-mode input
voltage range
(see Note 5)
VOH
VOL
AVD
CMRR
kSVR
IDD
High-level output voltage
Low-level output voltage
Large-signal
L
i
l diff
differential
ti l
voltage amplification
am lification
Common-mode
C
d
rejection ratio
TA†
TEST CONDITIONS
VDD = 5 V
MIN
TYP
MAX
VDD = 10 V
MIN
TYP
MAX
190
200
25°C
VO = 1.4 V,
RS = 50 Ω,
VIC = 0,
RI = 1 MΩ
Full range
25°C to
85°C
1.1
25°C
0.1
85°C
24
VO = VDD / 2,,
VIC = VDD / 2
25°C
0.6
85°C
200
25°C
Full range
V
VID = 100 mV,
RL = 1 MΩ
850
1350
– 0.2
to 4
1150
1650
0.1
26
2000
220
1000
0.7
– 0.3
to 4.2
– 0.2
to 9
– 0.2
to 3.5
2000
– 0.3
to 9.2
– 0.2
to 8.5
pA
V
25°C
3.2
4.1
8.2
8.9
– 40°C
3.2
4.1
8.2
8.9
85°C
3.2
4.2
8.2
8.9
V
25°C
0
25
0
25
– 40°C
0
25
0
25
85°C
0
25
0
25
25°C
250
525
500
850
RL = 1 MΩ,
– 40°C
250
900
500
1550
85°C
150
330
250
585
VIC = VICRmin
pA
V
100 mV,
V
VID = –100
IOL = 0
See Note 6
µV
µV/°C
1
1000
UNIT
25°C
70
95
75
97
– 40°C
70
95
75
97
85°C
70
95
75
97
mV
V/mV
dB
25°C
75
98
75
98
S
l
lt
j ti
Supply-voltage
rejection
ratio (∆VDD /∆VIO)
t 10 V,
V
VDD = 5 V to
VO = 1
1.4
4V
– 40°C
75
98
75
98
85°C
75
98
75
98
25°C
40
68
57
92
Supply current
lifiers)
(four am
amplifiers)
VO = VDD / 2,
2
VIC = VDD / 2
2, No load
– 40°C
62
108
98
172
85°C
29
52
40
72
dB
µA
† Full range is – 40°C to 85°C.
NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically.
5. This range also applies to each input individually.
6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
11
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
operating characteristics at specified free-air temperature
TLC1078I
PARAMETER
TEST CONDITIONS
TA
25°C
32
47
– 40°C
39
59
85°C
25
34
25°C
68
68
25°C
85
110
– 40°C
130
155
SR
Slew rate at unity gain
RL = 1 MΩ,
MΩ
CL = 20 pF,
F
VI(PP) = 1 V
V, See Figure 1
Vn
Equivalent input noise voltage
f = 1 kHz,
B1
φm
Unity-gain bandwidth
Phase margin at unity gain
CL = 20 pF,
CL = 20 pF,
RS = 20 Ω
See Figure 2
See Figure 2
VDD = 5 V
MIN
TYP
MAX
VDD = 10 V
MIN
TYP
MAX
85°C
55
80
25°C
34°
38°
– 40°C
38°
40°
85°C
28°
32°
UNIT
V/ms
nV/√Hz
kHz
operating characteristics at specified free-air temperature
TLC1079I
PARAMETER
SR
Vn
B1
φm
12
Slew rate at unity gain
Equivalent input noise voltage
Unity-gain bandwidth
Phase margin at unity gain
TEST CONDITIONS
RL = 1 MΩ,
MΩ
CL = 20 pF,
F
VI(PP) = 1 V
V, See Figure 1
f = 1 kHz,
CL = 20 pF,
CL = 20 pF,
RS = 20 Ω
See Figure 2
See Figure 2
POST OFFICE BOX 655303
TA
VDD = 5 V
MIN
TYP
MAX
VDD = 10 V
TYP
MAX
25°C
32
47
– 40°C
39
59
85°C
25
34
25°C
68
68
25°C
85
110
– 40°C
130
155
85°C
55
80
25°C
34°
38°
– 40°C
38°
42°
85°C
28°
32°
• DALLAS, TEXAS 75265
UNIT
MIN
V/ms
nV/√Hz
kHz
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
electrical characteristics at specified operating free-air temperature
TLC1078M
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
IIO
Input offset current
(see Note 4)
IIB
Input
In
ut bias current
(see Note 4)
VICR
VOH
VOL
AVD
CMRR
kSVR
IDD
TEST
CONDITIONS
VO = 1.4 V,
VIC = 0,
RS = 50 Ω,
RL = 1 MΩ
VO = VDD / 2,,
VIC = VDD / 2
Low-level output voltage
Large-signal
L
i
l diff
differential
ti l
voltage amplification
am lification
Common-mode rejection ratio
VDD = 10 V
MIN
TYP
MAX
160
180
25°C
450
1250
25°C to 125°C
25°C
0.1
1.4
25°C
0.6
125°C
9
0
to 4
600
1400
1.4
125°C
Full range
V
VID = 100 mV,
RL= 1 MΩ
VDD = 5 V
MIN
TYP
MAX
Full range
25°C
Common
mode in
ut
Common-mode
input
voltage range (see Note 5)
High-level output voltage
TA†
0.1
1.8
pA
15
0.7
35
– 0.3
to 4.2
10
0
to 9
0
to 3.5
– 0.3
to 9.2
0
to 8.5
V
25°C
3.2
4.1
8.2
8.9
– 55°C
3.2
4.1
8.2
8.8
125°C
3.2
4.2
8.2
9
V
0
25
0
25
– 55°C
0
25
0
25
125°C
0
25
0
25
RL= 1 MΩ ,
See Note 6
25°C
250
525
500
850
– 55°C
250
950
500
1750
125°C
35
200
75
380
VO = 1.4 V
Supply
S
l currentt (t
(two
am
lifiers)
amplifiers)
VO = VDD / 2,
VIC = VDD / 2,
N lload
No
d
nA
V
25°C
S
l
lt
j ti ratio
ti
Supply-voltage
rejection
(∆VDD /∆VIO)
nA
pA
35
100 mV,
V
VID = –100
IOL = 0
VIC = VICRmin
µV
µV/°C
1.4
15
UNIT
25°C
70
95
75
97
– 55°C
70
95
75
97
125°C
70
85
75
91
25°C
75
98
75
98
– 55°C
70
98
70
98
125°C
70
98
70
98
mV
V/mV
dB
dB
25°C
20
34
29
46
– 55°C
35
60
56
96
125°C
14
24
18
30
µA
† Full range is – 55°C to 125°C.
NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically.
5. This range also applies to each input individually.
6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
13
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
electrical characteristics at specified free-air temperature
TLC1079M
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient of
input offset voltage
IIO
Input offset current
(see Note 4)
IIB
Input bias current
(see Note 4)
VICR
VOH
VOL
AVD
CMRR
kSVR
IDD
TEST CONDITIONS
VO = 1.4 V,
RS = 50 Ω,
VIC = 0,
RI = 1 MΩ
Low-level output voltage
Large-signal
L
i
l diff
differential
ti l
voltage amplification
am lification
Common-mode
C
d rejection
j ti
ratio
VDD = 5 V
MIN
TYP
MAX
VDD = 10 V
MIN
TYP
MAX
25°C
190
200
Full range
VO = VDD / 2,,
VIC = VDD / 2
1.4
25°C
0.1
125°C
1.4
25°C
0.6
125°C
9
Full range
V
VID = 100 mV,
RL = 1 MΩ
100 mV,
V
VID = –100
IOL = 0
RL = 1 MΩ,
See Note 6
VIC = VICRmin
850
1600
25°C to
125°C
25°C
Common mode input
voltage range (see Note 5)
High-level output voltage
TA†
0
to 4
0.1
15
1.8
pA
15
0.7
35
– 0.3
to 4.2
10
0
to 9
0
to 3.5
– 0.3
to 9.2
nA
V
0
to 8.5
V
25°C
3.2
4.1
8.2
8.9
– 55°C
3.2
4.1
8.2
8.9
125°C
3.2
4.2
8.2
9
V
25°C
0
25
0
25
– 55°C
0
25
0
25
125°C
0
25
0
25
25°C
250
525
500
850
– 55°C
250
950
500
1750
125°C
35
200
75
380
25°C
70
95
75
97
– 55°C
70
95
75
97
125°C
70
85
75
91
mV
V/mV
dB
25°C
75
98
75
98
VDD = 5 V to
t 10 V,
V
VO = 1
1.4
4V
– 55°C
70
98
70
98
125°C
70
98
70
98
25°C
40
68
57
92
Supply current
am lifiers)
(four amplifiers)
VO = VDD / 2,
2
VIC = VDD / 2, No load
– 55°C
69
120
111
192
125°C
27
48
35
60
• DALLAS, TEXAS 75265
nA
pA
35
Supply
S
l voltage
lt
rejection
j ti
ratio (∆VDD /∆VIO)
POST OFFICE BOX 655303
µV
µV/°C
1.4
† Full range is – 55°C to 125°C.
NOTES: 4. The typical values of input bias current and input offset current below 5 pA were determined mathematically.
5. This range also applies to each input individually.
6. At VDD = 5 V, VO = 0.25 V to 2 V; at VDD = 10 V, VO = 1 V to 6 V.
14
1150
1900
UNIT
dB
µA
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
operating characteristics at specified free-air temperature
TLC1078M
PARAMETER
TEST CONDITIONS
TA
25°C
32
47
– 55°C
41
63
125°C
20
27
25°C
68
68
SR
Slew rate at unity gain
RL = 1 MΩ,
MΩ
CL = 20 pF,
F
VI(PP) = 1 V,
V See Figure 1
Vn
Equivalent input noise voltage
f = 1 kHz,
RS = 20 Ω
B1
Unity-gain bandwidth
CL = 20 pF,
See Figure 2
φm
Phase margin at unity gain
CL = 20 pF,
See Figure 2
VDD = 5 V
MIN
TYP
MAX
VDD = 10 V
MIN
TYP
MAX
25°C
85
110
– 55°C
140
165
125°C
45
70
25°C
34°
38°
– 55°C
39°
43°
125°C
25°
29°
UNIT
V/ms
nV/√Hz
kHz
operating characteristics at specified free-air temperature
TLC1079M
PARAMETER
TEST CONDITIONS
TA
25°C
32
47
– 55°C
41
63
125°C
20
27
25°C
68
68
SR
Slew rate at unity gain
RL = 1 MΩ,
MΩ
CL = 20 pF,
F
VI(PP) = 1 V,
V See Figure 1
Vn
Equivalent input noise voltage
f = 1 kHz,
B1
φm
Unity gain bandwidth
Unity-gain
Phase margin at unity gain
pF
CL = 20 pF,
CL = 20 pF,
pF
RS = 20 Ω
See Figure 2
See Figure 2
POST OFFICE BOX 655303
VDD = 5 V
MIN
TYP
MAX
VDD = 10 V
MIN
TYP
MAX
25°C
85
110
– 55°C
140
165
125°C
45
70
25°C
34°
38°
– 55°C
39°
43°
125°C
25°
29°
• DALLAS, TEXAS 75265
UNIT
V/ms
nV/√Hz
kHz
15
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
PARAMETER MEASUREMENT INFORMATION
VDD
–
VO
10 kΩ
+
VI
VDD
100 Ω
VI
VO
VDD/2
+
RL
–
CL
(see Note A)
CL
(see Note A)
NOTE A: CL includes fixture capacitance.
Figure 1. Slew-Rate Test Circuit
16
POST OFFICE BOX 655303
Figure 2. Unity-Gain Bandwidth and
Phase-Margin Test Circuit
• DALLAS, TEXAS 75265
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
αVIO
Temperature coefficient of input offset voltage
Distribution
IIB
IIO
Input bias current
vs Free-air temperature
7
Input offset current
vs Free-air temperature
7
VIC
Common-mode input voltage
vs Supply voltage
High-level output voltage
vs High-level output current
vs Supply voltage
vs Free-air temperature
9, 10
11
12
VOL
Low-level output voltage
vs Common-mode input voltage
vs Differential input voltage
vs Free-air temperature
vs Low-level output current
13, 14
15
16
17, 18
AVD
Large-signal differential voltage amplification
vs Supply voltage
vs Free-air temperature
vs Frequency
19
20
21, 22
VOM
Maximum peak output voltage
vs Frequency
23
IDD
Supply current
vs Supply voltage
vs Free-air temperature
24
25
SR
Slew rate
vs Supply voltage
vs Free-air temperature
26
27
Normalized slew rate
vs Free-air temperature
28
Equivalent input noise voltage
vs Frequency
29
B1
Unity-gain bandwidth
vs Supply voltage
vs Free-air temperature
30
31
φm
Phase margin
vs Supply voltage
vs Free-air temperature
vs Capacitance load
32
33
34
Phase shift
vs Frequency
VOH
Vn
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3–6
8
21, 22
17
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TYPICAL CHARACTERISTICS
DISTRIBUTION OF TLC1078
INPUT OFFSET VOLTAGE
TEMPERATURE COEFFICIENT
DISTRIBUTION OF TLC1078
INPUT OFFSET VOLTAGE
TEMPERATURE COEFFICIENT
ÏÏÏÏÏÏÏÏÏÏÏÏ
ÏÏÏÏÏÏ
ÏÏÏÏÏÏÏ
ÏÏÏÏÏ
ÏÏÏÏÏÏÏ
ÏÏÏÏÏ
ÏÏÏÏÏÏ
ÏÏÏÏÏÏ
70
70
50
40
60
Percentage of Amplifiers – %
Percentage of Amplifiers – %
60
356 Amplifiers Tested From 8 Water Lots
VDD = 5 V
TA = 25°C to 125°C
P Package
Outliers:
(1) 19.2 µV/°C
(1) 12.1 µV/°C
30
20
10
50
40
ÏÏÏÏÏÏÏÏÏÏÏ
ÏÏÏÏÏ
ÏÏÏÏÏÏ
ÏÏÏÏÏ
ÏÏÏÏ
ÏÏÏÏÏÏ
ÏÏÏÏ
ÏÏÏÏÏ
ÏÏÏÏÏ
356 Amplifiers Tested From 8 Water Lots
VDD = 10 V
TA = 25°C to 125°C
P Package
Outliers:
(1) 18.7 µV/°C
(1) 11.6 µV/°C
30
20
10
0
– 10 – 8 – 6 – 4 – 2 0
2
4
6
8
αVIO – Temperature Coefficient – µV/°C
0
2
4
6
8
– 10 – 8 – 6 – 4 – 2 0
αVIO – Temperature Coefficient – µV/°C
10
Figure 4
Figure 3
DISTRIBUTION OF TLC1079
INPUT OFFSET VOLTAGE
TEMPERATURE COEFFICIENT
Percentage of Amplifiers – %
60
50
40
DISTRIBUTION OF TLC1079
INPUT OFFSET VOLTAGE
TEMPERATURE COEFFICIENT
ÏÏÏÏÏÏÏÏÏÏÏÏ
ÏÏÏÏÏÏ
ÏÏÏÏÏÏÏÏÏÏÏÏ
ÏÏÏÏÏÏÏ
ÏÏÏÏÏ
ÏÏÏÏÏÏ
ÏÏÏÏÏÏ
ÏÏÏÏÏ
ÏÏÏÏÏ
ÏÏÏÏÏÏ
ÏÏÏÏÏ
70
356 Amplifiers Tested From 8 Wafer Lots
VDD = 5 V
TA = 25°C to 125°C
N Package
Outliers:
(1) 19.2 µV/°C
(1) 12.1 µV/°C
60
Percentage of Amplifiers – %
70
30
20
10
50
40
ÏÏÏÏÏÏÏÏÏÏÏ
ÏÏÏÏ
ÏÏÏÏÏÏ
ÏÏÏÏ
ÏÏÏÏ
ÏÏÏÏÏ
ÏÏÏÏ
ÏÏÏÏÏ
356 Amplifiers Tested From 8 Wafer Lots
VDD = 10 V
TA = 25°C to 125°C
N Package
Outliers:
(1) 18.7 µV/°C
(1) 11.6 µV/°C
30
20
10
0
– 10 – 8 – 6 – 4 – 2 0
2
4
6
8
αVIO – Temperature Coefficient – µV/°C
10
0
2
4
6
8
– 10 – 8 – 6 – 4 – 2 0
αVIO – Temperature Coefficient – µV/°C
Figure 5
18
10
Figure 6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
10
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TYPICAL CHARACTERISTICS
COMMON-MODE INPUT VOLTAGE POSITIVE LIMIT
vs
SUPPLY VOLTAGE
ÏÏÏÏÏ
ÏÏÏÏÏ
10000
VIC – Common-Mode Input Voltage – V
ÏÏ
ÏÏ ÏÏ
ÏÏ
ÏÏÏÏÏ
ÏÏÏÏÏ
1000
IIB
100
IIO
10
See Note A
1
I
0.1
25
ÏÏÏÏ
16
VDD = 10 V
VIC = 5 V
I
IB and IO – Input Bias and Offset Current – pA
INPUT BIAS AND OFFSET CURRENT †
vs
FREE-AIR TEMPERATURE
12
10
8
6
4
2
0
125
45
65
85
105
TA – Free-Air Temperature – °C
TA = 25°C
14
0
2
4
6
8
10
12
VDD – Supply Voltage – V
14
16
NOTE A: The typical values of input bias current and input offset
current below 5 pA were determined mathematically.
Figure 7
Figure 8
HIGH-LEVEL OUTPUT VOLTAGE†‡
vs
HIGH-LEVEL OUTPUT CURRENT
HIGH-LEVEL OUTPUT VOLTAGE
vs
HIGH-LEVEL OUTPUT CURRENT
16
VID = 100 mV
TA = 25°C
4
VDD = 5 V
3
VDD = 4 V
VDD = 3 V
2
1
VOH – High-Level Output Voltage – V
VOH – High-Level Output Voltage – V
5
VID = 100 mV
TA = 25°C
14
VDD = 16 V
12
10
8
VDD = 10 V
6
4
2
0
0
0
–2
–4
–6
–8
IOH – High-Level Output Current – mA
– 10
0
– 10
– 20
– 30
IOH – High-Level Output Current – mA
Figure 9
– 40
Figure 10
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
† The VDD = 3 V curve does not apply to the TLC107xM.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
19
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TYPICAL CHARACTERISTICS
HIGH-LEVEL OUTPUT VOLTAGE†
vs
FREE-AIR TEMPERATURE
HIGH-LEVEL OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
VDD – 1.6
VID = 100 mV
RL = 1 MΩ
TA = 25°C
14
VOH – High-Level Output Voltage – V
VOH – High-Level Output Voltage – V
16
12
10
8
6
4
2
0
0
2
4
6
8
10
12
VDD – Supply Voltage – V
14
16
VID = 100 mV
IOH = – 5 mA
VDD – 1.7
VDD = 5 V
VDD – 1.8
VDD – 1.9
VDD – 2
VDD = 10 V
VDD – 2.1
VDD – 2.2
VDD – 2.3
VDD – 2.4
– 75
– 50
Figure 12
Figure 11
LOW-LEVEL OUTPUT VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
LOW-LEVEL OUTPUT VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
500
700
VDD = 5 V
IOL = 5 mA
TA = 25°C
VOL – Low-Level Output Voltage – mV
VOL – Low-Level Output Voltage – mV
– 25
0
25
50
75
100
TA – Free-Air Temperature – °C
600
VID = –100 mV
500
400
VID = –1 V
300
450
400
VID = –100 mV
1
2
3
VIC – Common-Mode Input Voltage – V
4
VID = –1 V
350
VID = –2.5 V
300
250
0
VDD = 10 V
IOL = 5 mA
TA = 25°C
0
2
4
6
8
VIC – Common-Mode Input Voltage – V
Figure 14
Figure 13
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
20
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
10
125
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TYPICAL CHARACTERISTICS
LOW-LEVEL OUTPUT VOLTAGE†
vs
FREE-AIR TEMPERATURE
LOW-LEVEL OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
900
VIC = |VID/2|
IOL = 5 mA
TA = 25°C
700
VOL – Low-Level Output Voltage – mV
VOL – Low-Level Output Voltage – mV
800
600
500
VDD = 5 V
400
300
VDD = 10 V
200
100
–2
–4
–6
–8
VID – Differential Input Voltage – V
700
VDD = 5 V
600
500
400
VDD = 10 V
300
200
100
0
– 75
0
0
VID = –1 V
VIC = 0.5 V
IOL = 5 mA
800
– 10
– 50
– 25
0
25
50
75
100
TA – Free-Air Temperature – °C
Figure 15
Figure 16
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
LOW-LEVEL OUTPUT VOLTAGE
vs
LOW-LEVEL OUTPUT CURRENT
3
1
0.8
VOL – Low-Level Output Voltage – V
VID = – 1 V
VIC = 0.5 V
TA = 25°C
0.9
VOL – Low-Level Output Voltage – V
125
VDD = 5 V
0.7
VDD = 4 V
0.6
VDD = 3 V
0.5
0.4
0.3
0.2
VID = –1 V
VIC = 0.5 V
TA = 25°C
2.5
VDD = 16 V
2
VDD = 10 V
1.5
1
0.5
0.1
0
0
0
1
2
3
4
5
6
7
IOL – Low-Level Output Current – mA
8
0
5
10
15
20
25
IOL – Low-Level Output Current – mA
30
Figure 18
Figure 17
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
21
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TYPICAL CHARACTERISTICS
LARGE SIGNAL
DIFFERENTIAL VOLTAGE AMPLIFICATION†
vs
FREE-AIR TEMPERATURE
LARGE-SIGNAL
DIFFERENTIAL VOLTAGE AMPLIFICATION†
vs
SUPPLY VOLTAGE
AVD
A
VD – Large-Signal Differential
Voltage Amplification – V/mV
1800
Á
Á
Á
1600
ÏÏÏÏ
ÏÏÏÏ
RL = 1 MΩ
2000
TA = – 55°C
RL = 1 MΩ
1800
TA = – 40°C
1400
AVD
A
VD – Large-Signal Differential
Voltage Amplification – V/mV
2000
TA = 0°C
ÏÏÏÏ
ÏÏÏÏ
ÏÏÏÏ
ÏÏÏÏÁÁ
ÏÏÏÏ
ÁÁ
ÏÏÏÏÏÁÁ
1200
TA = 25°C
1000
TA = 70°C
800
TA = 85°C
600
400
1600
1400
VDD = 10 V
1200
1000
800
600
VDD = 5 V
400
TA = 125°C
200
0
– 75
0
4
6
8
10
12
VDD – Supply Voltage – V
14
200
16
– 50
– 25
0
25
50
75
100
TA – Free-Air Temperature – °C
Figure 19
Figure 20
LARGE-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FREQUENCY
VDD = 5 V
RL = 1 MΩ
TA = 25°C
ÁÁ
ÁÁ
10 5
0°
ÏÏÏ
ÏÏÏ
10 4
30°
AVD
10 3
60°
10 2
Phase Shift
AVD
A
VD – Large-Signal Differential
Voltage Amplification
10 6
90°
Phase Shift
101
120°
1
150°
0.1
1
10
100
1k
10 k
f – Frequency – Hz
100 k
180°
1M
Figure 21
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
22
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
125
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TYPICAL CHARACTERISTICS
LARGE-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FREQUENCY
VDD = 10 V
RL = 1 MΩ
TA = 25°C
10 5
0°
ÏÏÏ
ÏÏÏ
10 4
30°
AVD
10 3
ÁÁ
ÁÁ
ÁÁ
60°
10 2
Phase Shift
AVD
AVD – Large-Signal Differential
Voltage Amplification
10 6
90°
Phase Shift
101
120°
1
150°
0.1
1
10
100
1k
10 k
f – Frequency – Hz
180°
1M
100 k
Figure 22
SUPPLY CURRENT†
vs
SUPPLY VOLTAGE
10
90
9
80
8
TA = 125°C
TA = 25°C
TA = – 55°C
VDD = 10 V
7
I DD – Supply Current – µA
V OM – Maximum Peak Output Voltage – V
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREQUENCY
6
5
VDD = 5 V
4
3
2
60
50
40
ÏÏÏÏ
ÏÏÏÏ
ÏÏÏÏ
ÏÏÏÏ
ÏÏÏÏ
TA = – 55°C
TA = – 40°C
TA = 0°C
TA = 25°C
TA = 70°C
TA = 125°C
30
20
RL = 1 MΩ
10
1
0
0.1
70
VO = VDD/2
No Load
0
1
10
f – Frequency – kHz
100
0
2
Figure 23
4
6
8
10
12
VDD – Supply Voltage – V
14
16
Figure 24
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
23
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TYPICAL CHARACTERISTICS
SUPPLY CURRENT †
vs
FREE-AIR TEMPERATURE
SLEW RATE
vs
SUPPLY VOLTAGE
60
70
VO = VDD/2
No Load
60
SR – Slew Rate – V/ms
I DD – Supply Current – µA
50
40
VDD = 10 V
30
20
VDD = 5 V
10
0
– 75
VIPP = 1 V
RL = 1 MΩ
CL = 20 pF
AV = 1
TA = 25°C
See Figure 1
50
40
30
20
10
0
– 50
– 25
0
25
50
75
TA – Free-Air Temperature – °C
100
125
0
2
4
6
8
10
12
VDD – Supply Voltage – V
Figure 25
NORMALIZED SLEW RATE†
vs
FREE-AIR TEMPERATURE
1.4
70
VDD = 10 V
VIPP = 5.5 V
RL = 1 MΩ
CL = 20 pF
AV = 1
See Figure 1
1.3
VDD = 10 V
1.2
50
Normalized Slew Rate
SR – Slew Rate – V/ms
60
VDD = 10 V
VIPP = 1 V
40
30
VDD = 5 V
VIPP = 1 V
– 50
1.1
VI(PP) = 1 V
RL = 1 MΩ
CL = 20 pF
AV = 1
VDD = 5 V
1
0.9
0.8
0.7
VDD = 5 V
VIPP = 2.5 V
10
0
– 75
16
Figure 26
SLEW RATE†
vs
FREE-AIR TEMPERATURE
20
14
– 25
0
25
50
75
100
TA – Free-Air Temperature – °C
0.6
125
0.5
– 75
– 50
Figure 27
– 25
0
25
50
75
100
TA – Free-Air Temperature – °C
125
Figure 28
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
24
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TYPICAL CHARACTERISTICS
UNITY-GAIN BANDWIDTH
vs
SUPPLY VOLTAGE
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
140
VDD = 5 V
RS = 20 Ω
TA = 25°C
200
100
90
80
ÁÁ
ÁÁ
VI = 10 mV
CL = 20 pF
TA = 25°C
See Figure 2
130
B1 – Unity-Gain Bandwidth – kHz
Vn
Vn – Equivalent Input Noise Voltage – nV/ Hz
300
70
60
120
110
100
90
80
70
60
50
50
10
100
f – Frequency – Hz
1
0
1000
2
4
6
8
10
12
VDD – Supply Voltage – V
Figure 29
16
42°
VDD = 5 V
VI = 10 mV
CL = 20 pF
See Figure 2
VI = 10 mV
CL = 20 pF
TA = 25°C
See Figure 2
40°
110
φ m – Phase Margin
B1 – Unity-Gain Bandwidth – kHz
14
PHASE MARGIN
vs
SUPPLY VOLTAGE
150
90
70
50
30
– 75
16
Figure 30
UNITY-GAIN BANDWIDTH†
vs
FREE-AIR TEMPERATURE
130
14
38°
36°
34°
32°
– 50
– 25
0
25
50
75
100
TA – Free-Air Temperature – °C
125
30°
0
2
Figure 31
4
6
8
10
12
VDD – Supply Voltage – V
Figure 32
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
25
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
TYPICAL CHARACTERISTICS
PHASE MARGIN†
vs
FREE-AIR TEMPERATURE
PHASE MARGIN
vs
CAPACITIVE LOAD
40°
37°
VDD = 5 V
VI = 10 mV
CL = 20 pF
See Figure 2
35°
φ m – Phase Margin
φ m – Phase Margin
36°
VDD = 5 V
VI = 10 mV
TA = 25°C
See Figure 2
32°
28°
33°
31°
29°
24°
27°
20°
– 75
– 50
– 25
0
25
50
75
100
TA – Free-Air Temperature – °C
125
25°
0
Figure 33
20
40
60
80
CL – Capacitive Load – pF
Figure 34
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
26
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
100
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
MECHANICAL INFORMATION
D (R-PDSO-G**)
PLASTIC SMALL-OUTLINE PACKAGE
14 PIN SHOWN
PINS **
0.050 (1,27)
8
14
16
A MAX
0.197
(5,00)
0.344
(8,75)
0.394
(10,00)
A MIN
0.189
(4,80)
0.337
(8,55)
0.386
(9,80)
DIM
0.020 (0,51)
0.014 (0,35)
14
0.010 (0,25) M
8
0.244 (6,20)
0.228 (5,80)
0.008 (0,20) NOM
0.157 (4,00)
0.150 (3,81)
1
Gage Plane
7
A
0.010 (0,25)
0°– 8°
0.044 (1,12)
0.016 (0,40)
Seating Plane
0.069 (1,75) MAX
0.010 (0,25)
0.004 (0,10)
0.004 (0,10)
4040047 / B 03/95
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).
Four center pins are connected to die mount pad.
Falls within JEDEC MS-012
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
27
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
MECHANICAL INFORMATION
FK (S-CQCC-N**)
LEADLESS CERAMIC CHIP CARRIER
28 TERMINAL SHOWN
18
17
16
15
14
13
NO. OF
TERMINALS
**
12
19
11
20
10
B
A
MIN
MAX
MIN
MAX
20
0.342
(8,69)
0.358
(9,09)
0.307
(7,80)
0.358
(9,09)
28
0.442
(11,23)
0.458
(11,63)
0.406
(10,31)
0.458
(11,63)
21
9
22
8
44
0.640
(16,26)
0.660
(16,76)
0.495
(12,58)
0.560
(14,22)
23
7
52
0.739
(18,78)
0.761
(19,32)
0.495
(12,58)
0.560
(14,22)
24
6
68
25
5
0.938
(23,83)
0.962
(24,43)
0.850
(21,6)
0.858
(21,8)
84
1.141
(28,99)
1.165
(29,59)
1.047
(26,6)
1.063
(27,0)
B SQ
A SQ
26
27
28
1
2
3
4
0.080 (2,03)
0.064 (1,63)
0.020 (0,51)
0.010 (0,25)
0.020 (0,51)
0.010 (0,25)
0.055 (1,40)
0.045 (1,14)
0.045 (1,14)
0.035 (0,89)
0.045 (1,14)
0.035 (0,89)
0.028 (0,71)
0.022 (0,54)
0.050 (1,27)
4040140 / D 10/96
NOTES: A.
B.
C.
D.
E.
28
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a metal lid.
The terminals are gold plated.
Falls within JEDEC MS-004
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
MECHANICAL INFORMATION
J (R-GDIP-T**)
CERAMIC DUAL-IN-LINE PACKAGE
14 PIN SHOWN
PINS **
14
16
18
20
22
A MAX
0.310
(7,87)
0.310
(7,87)
0.310
(7,87)
0.310
(7,87)
0.410
(10,41)
A MIN
0.290
(7,37)
0.290
(7,37)
0.290
(7,37)
0.290
(7,37)
0.390
(9,91)
B MAX
0.785
(19,94)
0.785
(19,94)
0.910
(23,10)
0.975
(24,77)
1.100
(28,00)
B MIN
0.755
(19,18)
0.755
(19,18)
C MAX
0.280
(7,11)
0.300
(7,62)
0.300
(7,62)
0.300
(7,62)
C MIN
0.245
(6,22)
0.245
(6,22)
0.245
(6,22)
0.245
(6,22)
DIM
B
14
8
C
1
7
0.065 (1,65)
0.045 (1,14)
0.100 (2,54)
0.070 (1,78)
0.020 (0,51) MIN
0.930
(23,62)
0.388
(9,65)
A
0.200 (5,08) MAX
Seating Plane
0.130 (3,30) MIN
0°– 15°
0.100 (2,54)
0.023 (0,58)
0.015 (0,38)
0.014 (0,36)
0.008 (0,20)
4040083 / B 04/95
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a ceramic lid using glass frit.
Index point is provided on cap for terminal identification only on press ceramic glass frit seal only.
Falls within MIL-STD-1835 GDIP1-T14, GDIP1-T16, GDIP1-T18, GDIP1-T20, and GDIP1-T22
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
29
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
MECHANICAL INFORMATION
JG (R-GDIP-T8)
CERAMIC DUAL-IN-LINE PACKAGE
0.400 (10,20)
0.355 (9,00)
8
5
0.280 (7,11)
0.245 (6,22)
1
4
0.065 (1,65)
0.045 (1,14)
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.130 (3,30) MIN
0.063 (1,60)
0.015 (0,38)
0°–15°
0.023 (0,58)
0.015 (0,38)
0.015 (0,38)
0.008 (0,20)
0.100 (2,54)
4040107 / B 04/95
NOTES: A.
B.
C.
D.
E.
30
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
This package can be hermetically sealed with a ceramic lid using glass frit.
Index point is provided on cap for terminal identification only on press ceramic glass frit seal only
Falls within MIL-STD-1835 GDIP1-T8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
MECHANICAL INFORMATION
N (R-PDIP-T**)
PLASTIC DUAL-IN-LINE PACKAGE
16 PIN SHOWN
PINS **
14
16
18
20
A MAX
0.775
(19,69)
0.775
(19,69)
0.920
(23.37)
0.975
(24,77)
A MIN
0.745
(18,92)
0.745
(18,92)
0.850
(21.59)
0.940
(23,88)
DIM
A
16
9
0.260 (6,60)
0.240 (6,10)
1
8
0.070 (1,78) MAX
0.035 (0,89) MAX
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.125 (3,18) MIN
0.100 (2,54)
0.021 (0,53)
0.015 (0,38)
0.010 (0,25) M
0°– 15°
0.010 (0,25) NOM
14/18 PIN ONLY
4040049/C 08/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001 (20 pin package is shorter then MS-001.)
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
31
TLC1078, TLC1078Y, TLC1079, TLC1079Y
LinCMOS µPOWER PRECISION
OPERATIONAL AMPLIFIERS
SLOS179 – FEBRUARY 1997
MECHANICAL INFORMATION
P (R-PDIP-T8)
PLASTIC DUAL-IN-LINE PACKAGE
0.400 (10,60)
0.355 (9,02)
8
5
0.260 (6,60)
0.240 (6,10)
1
4
0.070 (1,78) MAX
0.310 (7,87)
0.290 (7,37)
0.020 (0,51) MIN
0.200 (5,08) MAX
Seating Plane
0.125 (3,18) MIN
0.100 (2,54)
0.021 (0,53)
0.015 (0,38)
0°– 15°
0.010 (0,25) M
0.010 (0,25) NOM
4040082 / B 03/95
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
32
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments and its subsidiaries (TI) reserve the right to make changes to their products or to discontinue
any product or service without notice, and advise customers to obtain the latest version of relevant information
to verify, before placing orders, that information being relied on is current and complete. All products are sold
subject to the terms and conditions of sale supplied at the time of order acknowledgement, including those
pertaining to warranty, patent infringement, and limitation of liability.
TI warrants performance of its semiconductor products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are utilized to the extent
TI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily
performed, except those mandated by government requirements.
CERTAIN APPLICATIONS USING SEMICONDUCTOR PRODUCTS MAY INVOLVE POTENTIAL RISKS OF
DEATH, PERSONAL INJURY, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE (“CRITICAL
APPLICATIONS”). TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, AUTHORIZED, OR
WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS. INCLUSION OF TI PRODUCTS IN SUCH APPLICATIONS IS UNDERSTOOD TO
BE FULLY AT THE CUSTOMER’S RISK.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance or customer product design. TI does not warrant or represent
that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other
intellectual property right of TI covering or relating to any combination, machine, or process in which such
semiconductor products or services might be or are used. TI’s publication of information regarding any third
party’s products or services does not constitute TI’s approval, warranty or endorsement thereof.
Copyright  1998, Texas Instruments Incorporated