TLP4197G TOSHIBA Photocoupler Photorelay TLP4197G PBX Telecommunication Modem･FAX Cards, Modems In PC Measurement Instrumentation Unit: mm The TOSHIBA TLP4197G consists of an aluminum gallium arsenide infrared emitting diode optically coupled to a photo-MOSFET in a SOP, which is suitable for surface mount assembly. The TLP4197GA is suitable for replacement of mechanical relays in many applications which require space savings. · 6 pin SOP (2.54SOP6): 2.1 mm high, 2.54 mm pitch · 1-form-B · Peak off-state voltage: 350 V (min) · Trigger LED current: 3 mA (max) · On-state current: 120 mA (max) · On-state resistance: 25 Ω (max) · Isolation voltage: 1500 Vrms (min) Pin Configuration (top view) JEDEC ― JEITA ― TOSHIBA 1 6 11-7C1 Weight: 0.13 g (typ.) 1: ANODE 2: CATHODE 2 5 4: DRAIN D1 5: SOURCE 3 4 6: DRAIN D2 Schematic 1 6 2 5 4 1 2002-04-18 TLP4197G Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit IF 50 mA Forward current derating (Ta > = 25°C) DIF/°C -0.5 mA/°C Peak forward current (100 ms pulse, 100 pps) IFP 1 A Reverse voltage VR 5 V Junction temperature Tj 125 °C VOFF 350 V LED Forward current Off-state output terminal voltage A connection Detector On-state current B connection 120 ION C connection On-state current derating (Ta > = 25°C) 240 -1.2 A connection B connection DION/°C -1.2 mA/°C -2.4 C connection Junction temperature mA 120 Tj 125 °C Operating temperature range Topr -40 to 85 °C Storage temperature range Tstg -55 to 125 °C Lead soldering temperature (10 s) Tsol 260 °C Isolation voltage (AC, 1 min, R.H. < = 60%) BVS 1500 Vrms (Note 1) Note 1: Device considered a two-terminal device: LED side pins shorted together, and DETECTOR side pins and 6 shorted together. Recommended Operating Conditions Characteristics Supply voltage Symbol Min Typ. Max Unit VDD ¾ ¾ 280 V Forward current IF 5 ¾ 25 mA On-state current ION ¾ ¾ 120 mA Operating temperature Topr -20 ¾ 65 °C Circuit Connections 1 6 2 5 3 4 A Connection LOAD AC or DC 1 6 2 5 3 4 B Connection 2 LOAD DC 1 6 2 5 3 4 LOAD DC C Connection 2002-04-18 TLP4197G Individual Electrical Characteristics (Ta = 25°C) Detector LED Characteristics Symbol Test Condition Min Typ. Max Unit Forward voltage VF IF = 10 mA 1.0 1.15 1.3 V Reverse current IR VR = 5 V ¾ ¾ 10 mA Capacitance CT V = 0, f = 1 MHz ¾ 30 ¾ pF ¾ Off-state current IOFF VOFF = 350 V, IF = 5 mA ¾ Capacitance COFF V = 0, f = 1 MHz, IF = 5 mA ¾ 1 mA ¾ pF Coupled Electrical Characteristics (Ta = 25°C) 項 目 記 号 測 定 条 件 最小 標準 最大 単位 Trigger LED current IFC IOFF = 10 mA ¾ 1 3 mA Return LED current IFT ION = 120 mA 0.1 ¾ ¾ mA ION = 120 mA ¾ 15 25 ION = 120 mA ¾ 8 14 ION = 240 mA ¾ 4 ¾ Min Typ. Max Unit 0.8 ¾ pF W A connection On-state resistance RON B connection C connection W Isolation Characteristics (Ta = 25°C) Characteristics Symbol Capacitance input to output Isolation resistance Test Condition CS VS = 0, f = 1 MHz ¾ RS VS = 500 V, R.H. < = 60% 10 5 ´ 10 10 ¾ 1500 ¾ ¾ AC, 1 s, in oil ¾ 3000 ¾ DC, 1 min, in oil ¾ 3000 ¾ Vdc Min Typ. Max Unit ¾ ¾ 1 ms ¾ ¾ 3 ms AC, 1 min Isolation voltage BVS 14 Vrms Switching Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Turn-on time tON RL = 200 W Turn-off time tOFF VDD = 20 V, IF = 5 mA (Note 2) Note 2: Switching time test circuit IF 1 6 2 RL VDD IF VOUT 4 VOUT 10% tON 3 90% tOFF 2002-04-18 TLP4197G IF – Ta ION – Ta 280 240 (mA) 80 On-state current ION Allowable forward current IF (mA) 100 60 40 20 200 160 120 80 40 0 -20 0 20 40 60 80 100 0 -20 120 0 Ambient temperature Ta (°C) 20 Ta = 25°C 120 Ta = 25°C A connection (mA) 10 On-state current ION (mA) 100 ION – VON 30 Forward current IF 80 200 50 5 3 1 0.5 0.3 0.1 0.6 0.8 1 1.2 Forward voltage 1.4 VF 1.6 100 0 -100 -200 -2 1.8 -1 (V) 0 On-state voltage RON – Ta 1 VON 2 (V) IFC – Ta 20 5 ION = 120 mA ION = 120 mA (mA) t < 1s A connection 15 4 IFC RON (W) 60 Ambient temperature Ta (°C) IF – VF 100 40 Trigger LED current On-state resistance 3 10 5 0 -20 0 20 40 60 80 2 1 0 -40 100 Ambient temperature Ta (°C) -20 0 20 40 60 80 100 Ambient temperature Ta (°C) 4 2002-04-18 TLP4197G tON, tOFF – IF tON, tOFF – Ta 1200 Ta = 25°C 1000 (ms) VDD = 20 V, RL = 200 W tOFF tON, tOFF 500 300 tON Switching time Switching time tON, tOFF (ms) 2000 100 50 30 1 3 5 Input current 10 30 IF 50 100 1000 VDD = 20 V, RL = 200 W IF = 5 mA 800 600 400 tON 200 0 -40 (mA) tOFF -20 0 20 40 60 80 100 Ambient temperature Ta (°C) IOFF – Ta 1000 Off-state current IOFF (nA) VOFF = 350 V IF = 5 mA 100 10 1 0 20 40 60 80 100 Ambient temperature Ta (°C) 5 2002-04-18 TLP4197G RESTRICTIONS ON PRODUCT USE 000707EBC · TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc.. · The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer’s own risk. · Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. · The products described in this document are subject to the foreign exchange and foreign trade laws. · The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. · The information contained herein is subject to change without notice. 6 2002-04-18