TOSHIBA TLP4176G

TLP4176G
TOSHIBA Photocoupler
Photorelay
TLP4176G
PBX
Telecommunication
Modem･FAX Cards, Modems In PC
Measurement Instrumentation
Unit: mm
The TOSHIBA TLP4176GA consists of an aluminum gallium arsenide
infrared emitting diode optically coupled to a photo-MOSFET in a SOP,
which is suitable for surface mount assembly.
The TLP4176GA is suitable for the modem applications which require
space savings.
•
4 pin SOP (2.54SOP4): 2.1 mm high, 2.54 mm pitch
•
1-form-B
•
Peak off-state voltage: 350 V (min)
•
Trigger LED current: 3 mA (max)
•
On-state current: 120 mA (max)
•
On-state resistance: 25 Ω (max)
•
Isolation voltage: 1500 Vrms (min)
Pin Configuration (top view)
JEDEC
―
JEITA
―
TOSHIBA
1
4
2
3
11-5H1
Weight: 0.1 g (typ.)
1: ANODE
2: CATHODE
3: DRAIN
4: DRAIN
1
2007-10-01
TLP4176G
Absolute Maximum Ratings (Ta = 25°C)
Characteristics
Symbol
Rating
Unit
IF
50
mA
Forward current derating
(Ta >
= 25°C)
ΔIF/°C
−0.5
mA/°C
Peak forward current
(100 μs pulse, 100 pps)
IFP
1
A
Reverse voltage
VR
5
V
Junction temperature
Tj
125
°C
VOFF
350
V
ION
120
mA
ΔION/°C
−1.2
mA/°C
Tj
125
°C
Operating temperature range
Topr
−40 to 85
°C
Storage temperature range
Tstg
−55 to 125
°C
Lead soldering temperature (10 s)
Tsol
260
°C
Isolation voltage
(AC, 1 min, R.H. <
= 60%)
BVS
1500
Vrms
LED
Forward current
Detector
Off-state output terminal voltage
On-state current
On-state current derating
(Ta >
= 25°C)
Junction temperature
(Note 1)
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: Device considered a two-terminal device: LED side pins shorted together, and DETECTOR side pins
shorted together.
Recommended Operating Conditions
Characteristics
Symbol
Min
Typ.
Max
Unit
Supply voltage
VDD
⎯
⎯
280
V
Forward current
IF
5
⎯
25
mA
On-state current
ION
⎯
⎯
120
mA
Operating temperature
Topr
−20
⎯
65
°C
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
Individual Electrical Characteristics (Ta = 25°C)
Detector
LED
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Forward voltage
VF
IF = 10 mA
1.0
1.15
1.3
V
Reverse current
IR
VR = 5 V
⎯
⎯
10
μA
Capacitance
CT
V = 0, f = 1 MHz
⎯
30
⎯
pF
Off-state current
IOFF
VOFF = 350 V, IF = 5 mA
⎯
⎯
1
μA
Capacitance
COFF
V = 0, f = 1 MHz, IF = 5 mA
⎯
⎯
⎯
pF
2
2007-10-01
TLP4176G
Coupled Electrical Characteristics (Ta = 25°C)
Characteristics
Symbol
Test Condition
Min
Typ.
Max
Unit
Trigger LED current
IFC
IOFF = 10 μA
⎯
1
3
mA
Return LED current
IFT
ION = 120 mA
0.1
⎯
⎯
mA
On-state resistance
RON
ION = 120 mA
⎯
15
25
Ω
Min
Typ.
Max
Unit
0.8
⎯
pF
⎯
Ω
Isolation Characteristics (Ta = 25°C)
Characteristics
Symbol
Capacitance input to output
Isolation resistance
Test Condition
CS
VS = 0, f = 1 MHz
RS
VS = 500 V, R.H. <
= 60%
⎯
5 × 10
BVS
10
14
1500
⎯
⎯
AC, 1 s, in oil
⎯
3000
⎯
DC, 1 min, in oil
⎯
3000
⎯
Vdc
Min
Typ.
Max
Unit
⎯
⎯
1
ms
⎯
⎯
3
ms
AC, 1 min
Isolation voltage
10
Vrms
Switching Characteristics (Ta = 25°C)
Characteristics
Symbol
Turn-on time
Turn-off time
Test Condition
tON
RL = 200 Ω
tOFF
VDD = 20 V, IF = 5 mA
(Note 2)
Note 2: Switching time test circuit
IF
1
4
RL
VDD
IF
VOUT
2
3
VOUT
10%
tON
3
90%
tOFF
2007-10-01
TLP4176G
IF – Ta
ION – Ta
280
240
(mA)
80
On-state current ION
Allowable forward current
IF (mA)
100
60
40
20
200
160
120
80
40
0
−20
0
20
40
60
80
100
0
−20
120
0
Ambient temperature Ta (°C)
20
Ta = 25°C
(mA)
10
On-state current ION
(mA)
Forward current IF
120
Ta = 25°C
5
3
1
0.5
0.3
0.8
1
1.2
1.4
Forward voltage VF
1.6
100
0
−100
−200
−2
1.8
−1
(V)
0
1
On-state voltage VON
RON – Ta
2
(V)
IFC – Ta
20
5
ION = 120 mA
ION = 120 mA
t < 1s
Trigger LED current IFC (mA)
On-state resistance RON (Ω)
100
ION – VON
30
15
10
5
0
−20
80
200
50
0.1
0.6
60
Ambient temperature Ta (°C)
IF – V F
100
40
0
20
40
60
80
4
3
2
1
0
−40
100
Ambient temperature Ta (°C)
−20
0
20
40
60
80
100
Ambient temperature Ta (°C)
4
2007-10-01
TLP4176G
tON, tOFF – IF
tON, tOFF – Ta
1200
Ta = 25°C
VDD = 20 V, RL = 200 Ω
1000
(μs)
VDD = 20 V, RL = 200 Ω
tOFF
500
Switching time tON, tOFF
Switching time tON, tOFF
(μs)
2000
300
tON
100
50
30
1
3
5
Input current
10
30
50
100
1000
IF = 5 mA
800
600
400
tON
200
0
−40
IF (mA)
tOFF
−20
0
20
40
60
80
100
Ambient temperature Ta (°C)
IOFF – Ta
1000
VOFF = 350 V
Off-state current IOFF
(nA)
IF = 5 mA
100
10
1
0
20
40
60
80
100
Ambient temperature Ta (°C)
5
2007-10-01
TLP4176G
RESTRICTIONS ON PRODUCT USE
20070701-EN
• The information contained herein is subject to change without notice.
• TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor
devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of
safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of
such TOSHIBA products could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as
set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and
conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability
Handbook” etc.
• The TOSHIBA products listed in this document are intended for usage in general electronics applications
(computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances,
etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires
extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or
bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or
spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments,
medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his
document shall be made at the customer’s own risk.
• The products described in this document shall not be used or embedded to any downstream products of which
manufacture, use and/or sale are prohibited under any applicable laws and regulations.
• The information contained herein is presented only as a guide for the applications of our products. No
responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which
may result from its use. No license is granted by implication or otherwise under any patents or other rights of
TOSHIBA or the third parties.
• GaAs(Gallium Arsenide) is used in this product. The dust or vapor is harmful to the human body. Do not break,
cut, crush or dissolve chemically.
• Please contact your sales representative for product-by-product details in this document regarding RoHS
compatibility. Please use these products in this document in compliance with all applicable laws and regulations
that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses
occurring as a result of noncompliance with applicable laws and regulations.
6
2007-10-01