SANKEN TMA254B

TMA25x Series
Triac (Bidirectional Triode Thyristor)
Features and Benefits
Description
▪ Exceptional reliability
▪ Small fully-molded SIP package with heatsink mounting
for high thermal dissipation and long life
▪ VDRM of 400 or 600 V
▪ 25 ARMS on-state current
▪ Uniform switching
▪ UL Recognized Component (File No.: E118037) (suffix I)
This Sanken triac (bidirectional triode thyristor) is designed
for AC power control, providing reliable, uniform switching
for full-cycle AC applications.
Package: 3-pin SIP (TO-3PF)
Applications
In comparison with other products on the market, the TMA25x
series provides increased isolation voltage (2000 VACRMS),
guaranteed for up to 1 minute, and greater peak nonrepetitive
off-state voltage, VDSM (700 V). In addition, commutation
dv/dt and (dv/dt)c are improved.
▪ Residential and commercial appliances: vacuum cleaners,
rice cookers, TVs, home entertainment
▪ White goods: washing machines
▪ Office automation power control, photocopiers
▪ Motor control for small tools
▪ Temperature control, light dimmers, electric blankets
▪ General use switching mode power supplies (SMPS)
Not to scale
Typical Applications
Halogen
Lamp
Gate
Controller
Heater control
(for example, LBP. PPC, MFP)
28105.09
Two-phase motor control
(for example, washing machine)
In-rush current control
(for example, SMPS)
TMA25x
Series
Triac (Bidirectional Triode Thyristor)
Selection Guide
Part Number
VDRM
(V)
UL-Recognized
Component
Package
Packing
400
400
600
600
Yes
–
Yes
–
3-pin fully molded SIP with
heatsink mount
30 pieces per tube
TMA254B(I)
TMA254B-L
TMA256B(I)
TMA256B-L
Absolute Maximum Ratings
Characteristic
Symbol
Peak Repetitive Off-State Voltage
VDRM
Peak Non-Repetitive Off-State Voltage
VDSM
Isolation Voltage
VISO
RMS On-State Current
IT(RMS)
Surge On-State Current
ITSM
Notes
TMA254Bx
RGREF = ∞
TMA256Bx
TMA254Bx
RGREF = ∞
TMA256Bx
AC RMS applied for 1 minute between lead and case
I2t
Units
400
V
600
V
500
V
700
V
2000
V
50/60 Hz full cycle sine wave,
total Conduction angle (α+) + (α–) = 360°,
TC = 83°C
25
A
f = 60 Hz
263
A
250
A
Value for 50 Hz half cycle sine wave, 1 cycle, ITSM = 250 A
312
A2 • s
Full cycle sine wave, peak value, non-repetitive,
initial TJ = 125°C
f = 50 Hz
I2t Value for Fusing
Rating
Critical Rising Rate of On-State Current
di/dt
IT = IT(RMS) × √2, VD = VDRM × 0.5, f ≤ 60 Hz, tgw ≥ 100 μs,
tgr ≤ 250 ns, Igp ≥ 60 mA
25
A/μs
Peak Gate Current
IGM
f ≥ 50 Hz, duty cycle ≤ 10%
2
A
PGM
f ≥ 50 Hz, duty cycle ≤ 10%
Peak Gate Power Dissipation
Average Gate Power Dissipation
PGM(AV)
TJ < TJ(max)
5
W
0.5
W
Junction Temperature
TJ
–40 to 125
ºC
Storage Temperature
Tstg
–40 to 125
ºC
Thermal Characteristics May require derating at maximum conditions
Characteristic
Symbol
Package Thermal Resistance
(Junction to Case)
RθJC
Test Conditions
For AC
Value
Units
1.5
ºC/W
Pin-out Diagram
T2
Terminal List Table
G
T1
1
2
3
Number
Name
1
T1
Main terminal, gate referenced
Function
2
T2
Main terminal connect to signal side
3
G
Gate control
All performance characteristics given are typical values for circuit or
system baseline design only and are at the nominal operating voltage and
an ambient temperature, TA, of 25°C, unless otherwise stated.
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
2
TMA25x
Series
Triac (Bidirectional Triode Thyristor)
ELECTRICAL CHARACTERISTICS
Characteristics
Symbol
Off-State Leakage Current
IDRM
On-State Voltage
VTM
Test Conditions
Min.
Typ.
Max.
Unit
VD = VDRM, TJ = 125°C, RGREF = ∞ using test circuit 1
–
–
2.0
mA
VD = VDRM, TJ = 25°C, RGREF = ∞ using test circuit 1
–
–
100
μA
IT = 20 A, TJ = 25°C
–
–
1.4
V
–
–
1.5
V
V
Quadrant I: T2+, G+
Gate Trigger Voltage
VGT
Gate Trigger Current
Quadrant II: T2+, G–
IGT
VD = 12 V, RL = 20 Ω, TJ = 25°C
–
–
1.5
Quadrant III: T2–, G–
–
–
1.5
V
Quadrant I: T2+, G+
–
–
30
mA
–
–
30
mA
–
–
30
mA
VD = VDRM × 0.5, RL = 4 kΩ, TJ = 125°C
0.2
–
–
V
TJ = 125°C, VD = 400 V, (di/dt)c = –12 A/ms, ITP = 2 A
15
–
–
V/μs
VD = VDRM × 0.66, TJ = 125°C, RGREF = ∞ using test circuit 1
100
–
–
V/μs
Quadrant II: T2+, G–
VD = 12 V, RL = 20 Ω, TJ = 25°C
Quadrant III: T2–, G–
Gate Non-trigger Voltage
VGD
Critical Rising Rate of
Off-State Voltage during
Commutation*
(dv/dt)c
Critical Rising Rate of
Off-StateVoltage
dv/dt
*Where ITP is the peak current through T2 to T1.
Test Circuit 1
Gate Trigger Characteristics
+T2
Quadrant II
Quadrant I
T2 [ + ]
T2
RGREF =
∞
T2 [ + ]
G[–]
G
G[+]
T1 [ – ]
T1
–IGT
T1 [ – ]
T2 [ – ]
T2 [ – ]
G[–]
G[+]
T1 [ + ]
Gate Trigger Current
Quadrant III
+IGT
T1 [ + ]
–T2
Quadrant IV
Polarities referenced to T1
tgr
igp
tgw
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
3
TMA25x
Series
Triac (Bidirectional Triode Thyristor)
Commutation Timing Diagrams
Q4
Supply VAC
Q
A
A = Conduction angle
VGT
VGATE
Q
ITSM
On-State
Currrent
Q
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
4
TMA25x
Series
Triac (Bidirectional Triode Thyristor)
Performance Characteristics at TA = 25°C
300
100
f = 50 Hz
full cycle sine wave
total Conduction angle
(A+) + (A–) = 360°
initial TJ = 125°C
250
TJ = 125°C
200
Surge On-State
Current versus
Quantity of
Cycles
ITSM (A)
Maximum On-State
Current versus
Maximum On-State
Voltage
IT (max) (A)
10
TJ = 25°C
1
150
100
50
0
0.6
0
1.4
1.8
VT (max) (V)
1.0
2.2
30
100
Case Temperature
versus On-State
RMS Current
15
TC (°C)
PT(AV) (W)
100
full cycle sine wave
total Conduction angle
(A+) + (A–) = 360°
125
20
83°C
75
10
50
5
25
0
10
Quantity of Cycles
150
full cycle sine wave
total Conduction angle
(A+) + (A–) = 360°
25
On-State Average
Power Dissipation
versus Maximum
On-State
RMS Current
1
0
0
10
20
IT(RMS)(max) (A)
30
0
10
20
IT(RMS) (A)
30
2.0
100
Gate Voltage
versus
Gate Current
VG (V)
10
VGM = 10 V
PGM
=5W
VGT (–40°C)
=2V
VGT (25°C)
= 1.5 V
1
IGT (–40°C)
= 100 mA
IGT (25°C) = 30 mA
Proportional Change
of Typical
Trigger Voltage
versus
Junction Temperature
PG(AV)
= 0.5 W
VGT (TJ) (V) / VGT (TJ = 25°C ) (V)
1.8
IGM = 2 A
100
1000
1.4
1.2
1.0
0.8
0.6
0.4
0.2
VGD = 0.2 V
0.1
10
1.6
0
–60 –40 –20
10 000
0
20
IG (mA)
40
60
80 100 120 140
TJ (°C)
10
10
Quadrant III (T2–, G–)
1
Proportional Change
of Typical
Holding Current
versus
Junction Temperature
Quadrant I (T2+, G+)
0.1
–60 –40 –20
0
20
40
60
80 100 120 140
TJ (°C)
IH (TJ) (A) / IH (TJ = 25°C ) (A)
Proportional Change
of Typical
Trigger Current
versus
Junction Temperature
IGT (TJ) (A) / IGT (TJ = 25°C ) (A)
RGREF = 1 kΩ
1
0.1
–60 –40 –20
0
20
40
60
80 100 120 140
TJ (°C)
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
5
TMA25x
Series
Triac (Bidirectional Triode Thyristor)
Transient Thermal Impedence versus Triac Voltage Pulse Duration
For AC
ZQJC (°C/W)
10
1
0.1
0.001
0.01
0.1
1
10
100
QT (s)
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
6
TMA25x
Series
Triac (Bidirectional Triode Thyristor)
5.5 ±0.2
TO-3PF Package Outline Drawing
15.6 ±0.2
5.5 ±0.2
3.45 ±0.2
9.5 ±0.2
Gate protrusion
23 ±0.3
Ø3.2 ±0.2
Branding
Area
XXXXXXXX
3.35 ±0.2
1.6
XXXXX
XXXXX
1.5
4.4
+0.2
1.75 –0.1
+0.2
+0.2
0.65 –0.1
+0.2
1.05 –0.1
(16.2)
3.3
2.15 –0.1
View A
View B
5.45 ±0.1
Terminal dimension at case surface
1
2
3
0.7 MAX
View A
Gate burr: 0.3 mm (max.), mold flash may appear at opposite side
Terminal core material: Cu
Terminal treatment: Ni plating and Pb-free solder dip
Leadform: 700
Package: TO-3PF (FM100)
Dimensions in millimeters
0.7 MAX
View B
Branding codes (exact appearance at manufacturer discretion):
1st line, type: MA25xB
2nd line left, lot:
YM
Where: Y is the last digit of the year of manufacture
M is the month (1 to 9, O, N, D)
2nd line right, lot:
DD
Where: DD is the date
Leadframe plating Pb-free. Device
meets RoHS requirements.
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
7
TMA25x
Series
Triac (Bidirectional Triode Thyristor)
Packing Specification
Tube Packing
504
18
47
519
144
244
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
8
TMA25x
Series
Triac (Bidirectional Triode Thyristor)
Bulk Packing
362
114
45
336
332
161
100 pieces per tray
5 trays per inner carton
4 inner cartons per outer carton
2000 pieces maximum per outer carton
Dimensions in millimeters
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
9
TMA25x
Series
Triac (Bidirectional Triode Thyristor)
WARNING — These devices are designed to be operated at lethal voltages and energy levels. Circuit designs
that embody these components must conform with applicable safety requirements. Precautions must be
taken to prevent accidental contact with power-line potentials. Do not connect grounded test equipment.
The use of an isolation transformer is recommended during circuit development and breadboarding.
Because reliability can be affected adversely by improper storage
environments and handling methods, please observe the following
cautions.
Cautions for Storage
•
Ensure that storage conditions comply with the standard
temperature (5°C to 35°C) and the standard relative humidity
(around 40 to 75%); avoid storage locations that experience
extreme changes in temperature or humidity.
•
Avoid locations where dust or harmful gases are present and
avoid direct sunlight.
•
Reinspect for rust on leads and solderability of products that have
been stored for a long time.
Cautions for Testing and Handling
When tests are carried out during inspection testing and other
standard test periods, protect the products from power surges
from the testing device, shorts between adjacent products, and
shorts to the heatsink.
Remarks About Using Silicone Grease with a Heatsink
• When silicone grease is used in mounting this product on a
heatsink, it shall be applied evenly and thinly. If more silicone
grease than required is applied, it may produce stress.
• Coat the back surface of the product and both surfaces of the
insulating plate to improve heat transfer between the product and
the heatsink.
• Volatile-type silicone greases may permeate the product and
produce cracks after long periods of time, resulting in reduced
heat radiation effect, and possibly shortening the lifetime of the
product.
• Our recommended silicone greases for heat radiation purposes,
which will not cause any adverse effect on the product life, are
indicated below:
Type
Suppliers
G746
Shin-Etsu Chemical Co., Ltd.
YG6260
Momentive Performance Materials
SC102
Dow Corning Toray Silicone Co., Ltd.
Heatsink Mounting Method
•
Torque When Tightening Mounting Screws. Thermal resistance
increases when tightening torque is low, and radiation effects are
decreased. When the torque is too high, the screw can strip, the
heatsink can be deformed, and distortion can arise in the product frame.
To avoid these problems, observe the recommended tightening torques
for this product package type 0.686 to 0.882 N•m (7 to 9 kgf•cm).
•
Diameter of Heatsink Hole: < 4 mm. The deflection of the press mold
when making the hole may cause the case material to crack at the joint
with the heatsink. Please pay special attention for this effect.
Soldering
•
When soldering the products, please be sure to minimize the
working time, within the following limits:
260±5°C 10 s
350±5°C
•
3s
Soldering iron should be at a distance of at least 1.5 mm from the
body of the products
Electrostatic Discharge
•
When handling the products, operator must be grounded.
Grounded wrist straps worn should have at least 1 MΩ of
resistance to ground to prevent shock hazard.
•
Workbenches where the products are handled should be
grounded and be provided with conductive table and floor mats.
•
When using measuring equipment such as a curve tracer, the
equipment should be grounded.
•
When soldering the products, the head of soldering irons or the
solder bath must be grounded in other to prevent leak voltages
generated by them from being applied to the products.
•
The products should always be stored and transported in our
shipping containers or conductive containers, or be wrapped in
aluminum foil.
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
10
TMA25x
Series
Triac (Bidirectional Triode Thyristor)
The products described herein are manufactured in Japan by Sanken Electric Co., Ltd. for sale by Allegro MicroSystems, Inc.
Sanken and Allegro reserve the right to make, from time to time, such departures from the detail specifications as may be required to permit improvements in the performance, reliability, or manufacturability of its products. Therefore, the user is cautioned to verify that the information in this
publication is current before placing any order.
When using the products described herein, the applicability and suitability of such products for the intended purpose shall be reviewed at the users
responsibility.
Although Sanken undertakes to enhance the quality and reliability of its products, the occurrence of failure and defect of semiconductor products at
a certain rate is inevitable.
Users of Sanken products are requested to take, at their own risk, preventative measures including safety design of the equipment or systems
against any possible injury, death, fires or damages to society due to device failure or malfunction.
Sanken products listed in this publication are designed and intended for use as components in general-purpose electronic equipment or apparatus
(home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Their use in any application requiring radiation
hardness assurance (e.g., aerospace equipment) is not supported.
When considering the use of Sanken products in applications where higher reliability is required (transportation equipment and its control systems
or equipment, fire- or burglar-alarm systems, various safety devices, etc.), contact a company sales representative to discuss and obtain written confirmation of your specifications.
The use of Sanken products without the written consent of Sanken in applications where extremely high reliability is required (aerospace equipment, nuclear power-control stations, life-support systems, etc.) is strictly prohibited.
The information included herein is believed to be accurate and reliable. Application and operation examples described in this publication are given
for reference only and Sanken and Allegro assume no responsibility for any infringement of industrial property rights, intellectual property rights, or
any other rights of Sanken or Allegro or any third party that may result from its use.
Anti radioactive ray design is not considered for the products listed herein.
Copyright © 2008-2009 Allegro MicroSystems, Inc.
This datasheet is based on Sanken datasheet SSE-24041
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
11
TMA25x
Series
Triac (Bidirectional Triode Thyristor)
Worldwide Contacts
Asia-Pacific
China
Sanken Electric Hong Kong Co., Ltd.
Suite 1026, Ocean Centre
Canton Road, Tsimshatsui
Kowloon, Hong Kong
Tel: 852-2735-5262, Fax: 852-2735-5494
Sanken Electric (Shanghai) Co., Ltd.
Room 3202, Maxdo Centre
Xingyi Road 8, Changning District
Shanghai, China
Tel: 86-21-5208-1177, Fax: 86-21-5208-1757
Taiwan Sanken Electric Co., Ltd.
Room 1801, 18th Floor
88 Jung Shiau East Road, Sec. 2
Taipei 100, Taiwan R.O.C.
Tel: 886-2-2356-8161, Fax: 886-2-2356-8261
Japan
Sanken Electric Co., Ltd.
Overseas Sales Headquarters
Metropolitan Plaza Building
1-11-1 Nishi-Ikebukuro, Toshima-ku
Tokyo 171-0021, Japan
Tel: 81-3-3986-6164, Fax: 81-3-3986-8637
Singapore
Sanken Electric Singapore Pte. Ltd.
150 Beach Road, #14-03 The Gateway West
Singapore 189720
Tel: 65-6291-4755, Fax: 65-6297-1744
Europe
Sanken Power Systems (UK) Limited
Pencoed Technology Park
Pencoed, Bridgend CF35 5HY, United Kingdom
Tel: 44-1656-869-100, Fax: 44-1656-869-162
North America
United States
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01606, U.S.A.
Tel: 1-508-853-5000, Fax: 1-508-853-7895
Allegro MicroSystems, Inc.
14 Hughes Street, Suite B105
Irvine, California 92618, U.S.A.
Tel: 1-949-460-2003, Fax: 1-949-460-7837
Korea
Sanken Electric Korea Co., Ltd.
Samsung Life Yeouido Building 16F
23-10, Yeouido-Dong, Yeongdeungpo-gu
Seoul 150-734, Korea
Tel: 82-2-714-3700, Fax: 82-2-3272-2145
Allegro MicroSystems, Inc.
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
12