TPSMB6.8/A THRU TPSMB43/A Surface Mount Automotive Transient Voltage Suppressors 6.8V-43V 1.0mA-10mA FEATURES • Patented PAR® construction • Available in uni-directional polarity only • 600 W peak pulse power capability with a 10/1000 µs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time • Low incremental surge resistance • Meets MSL level 1, per J-STD-020C, LF max peak of 260 °C • Solder dip 260 °C, 40 seconds • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC MECHANICAL DATA Case: DO-214AA (SMB) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Color band denotes cathode end MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 µs waveform (1)(2) Peak pulse current with a 10/1000 µs waveform (1) VALUE UNIT PPPM 600 W IPPM See next table A IFSM 75 A (Fig. 3) Peak forward surge current 8.3 ms single half sine-wave Instantaneous forward voltage at 50 (Fig. 1) SYMBOL (2)(3) A (3) Operating junction and storage temperature range VF 3.5 V TJ, TSTG - 65 to + 185 °C Notes: (1) Non-repetitive current pulse, per Fig. 3 and derated above TA = 25 °C per Fig. 2 (2) Mounted on 0.2 x 0.2" (5.0 x 5.0 mm) land areas per figure (3) Mounted on 8.3 ms single half sine-wave duty cycle = 4 pulses per minute maximum E-mail: [email protected] 1 of 3 Web Site: www.taychipst.com TPSMB6.8/A THRU TPSMB43/A 6.8V-43V 1.0mA-10mA Surface Mount Automotive Transient Voltage Suppressors ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DEVICE DEVICE MARKING CODE BREAKDOWN VOLTAGE VBR (1) AT IT (V) MIN. TEST CURRENT IT (mA) STANDOFF VOLTAGE VWM (V) MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) TJ = 150 °C MAXIMUM REVERSE LEAKAGE AT VWM ID (µA) MAXIMUM PEAK PULSE SURGE CURRENT MAX. IPPM (2) (A) MAXIMUM CLAMPING VOLTAGE AT IPPM VC (V) TPSMB6.8 KDP 6.12 7.48 10 5.50 500 1000 55.6 10.8 TPSMB6.8A KEP 6.45 7.14 10 5.80 500 1000 57.1 10.5 TPSMB7.5 KFP 6.75 8.25 10 6.05 250 500 51.3 11.7 TPSMB7.5A KGP 7.13 7.88 10 6.40 250 500 53.1 11.3 TPSMB8.2 KHP 7.38 9.02 10 6.63 100 200 48.0 12.5 TPSMB8.2A KKP 7.79 8.61 10 7.02 100 200 49.6 12.1 TPSMB9.1 KLP 8.19 10.0 1.0 7.37 25.0 50.0 43.5 13.8 TPSMB9.1A KMP 8.65 9.55 1.0 7.78 25.0 50.0 44.8 13.4 TPSMB10 KNP 9.00 11.0 1.0 8.10 5.0 20.0 40.0 15.0 TPSMB10A KPP 9.50 10.5 1.0 8.55 5.0 20.0 41.4 14.5 TPSMB11 KQP 9.90 12.1 1.0 8.92 2.0 5.0 37.0 16.2 TPSMB11A KRP 10.5 11.6 1.0 9.40 2.0 5.0 38.5 15.6 TPSMB12 KSP 10.8 13.2 1.0 9.72 2.0 5.0 34.7 17.3 TPSMB12A KTP 11.4 12.6 1.0 10.2 2.0 5.0 35.9 16.7 TPSMB13 KUP 11.7 14.3 1.0 10.5 2.0 5.0 31.6 19.0 TPSMB13A KVP 12.4 13.7 1.0 11.1 2.0 5.0 33.0 18.2 TPSMB15 KWP 13.5 16.5 1.0 12.1 1.0 5.0 27.3 22.0 TPSMB15A KXP 14.3 15.8 1.0 12.8 1.0 5.0 28.3 21.2 TPSMB16 KYP 14.4 17.6 1.0 12.9 1.0 5.0 25.5 23.5 TPSMB16A KZP 15.2 16.8 1.0 13.6 1.0 5.0 26.7 22.5 TPSMB18 LDP 16.2 19.8 1.0 14.5 1.0 5.0 22.6 26.5 TPSMB18A LEP 17.1 18.9 1.0 15.3 1.0 5.0 23.8 25.2 TPSMB20 LFP 18.0 22.0 1.0 16.2 1.0 5.0 20.6 29.1 TPSMB20A LGP 19.0 21.0 1.0 17.1 1.0 5.0 21.7 27.7 TPSMB22 LHP 19.8 24.2 1.0 17.8 1.0 5.0 18.8 31.9 TPSMB22A LKP 20.9 23.1 1.0 18.8 1.0 5.0 19.6 30.6 TPSMB24 LLP 21.6 26.4 1.0 19.4 1.0 5.0 17.3 34.7 TPSMB24A LMP 22.8 25.2 1.0 20.5 1.0 5.0 18.1 33.2 TPSMB27 LNP 24.3 29.7 1.0 21.8 1.0 5.0 15.3 39.1 TPSMB27A LPP 25.7 28.4 1.0 23.1 1.0 5.0 16.0 37.5 TPSMB30 LQP 27.0 33.0 1.0 24.3 1.0 5.0 13.8 43.5 TPSMB30A LRP 28.5 31.5 1.0 25.6 1.0 5.0 14.5 41.4 TPSMB33 LSP 29.7 36.3 1.0 26.8 1.0 5.0 12.6 47.7 TPSMB33A LTP 31.4 34.7 1.0 28.2 1.0 5.0 13.1 45.7 TPSMB36 LUP 32.4 39.6 1.0 29.1 1.0 5.0 11.5 52.0 TPSMB36A LVP 34.2 37.8 1.0 30.8 1.0 5.0 12.0 49.9 TPSMB39 LWP 35.1 42.9 1.0 31.6 1.0 5.0 10.6 56.4 TPSMB39A LXP 37.1 41.0 1.0 33.3 1.0 5.0 11.1 53.9 TPSMB43 LYP 38.7 47.3 1.0 34.8 1.0 5.0 9.70 61.9 TPSMB43A LZP 40.9 45.2 1.0 36.8 1.0 5.0 10.1 59.3 Notes: (1) VBR measured after IT applied for 300 µs, IT = square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derated per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 E-mail: [email protected] 2 of 3 Web Site: www.taychipst.com TPSMB6.8/A THRU TPSMB43/A 6.8V-43V 1.0mA-10mA Surface Mount Automotive Transient Voltage Suppressors RATINGS AND CHARACTERISTIC CURVES TPSMB6.8/A 10 1.0 0.2 x 0.2" (5.0 x 5.0 mm) Copper Pad Areas 0.1 0.1 µs TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 µs Peak Value IPPM 100 Half Value - IPP IPPM 2 50 10/1000 µs Waveform as defined by R.E.A. td 0 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 1.0 0 3.0 2.0 td - Pulse Width (s) t - Time (ms) Figure 1. Peak Pulse Power Rating Curve Figure 3. Pulse Waveform 4.0 10000 100 Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % TPSMB43/A 150 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C IPPM - Peak Pulse Current, % IRSM PPPM - Peak Pulse Power (kW) 100 THRU 75 50 25 VR measured at Zero Bias 1000 VR measured at Stand-Off Voltage, VWM 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 0 0 50 100 150 1 200 10 TJ - Initial Temperature (°C) 100 VBR - Breakdown Voltage (V) Figure 2. Pulse Power or Current vs. Initial Junction Temperature Figure 4. Typical Junction Capacitance 100 Peak Forward Surge Current (A) TJ = TJ max. 8.3 ms Single Half Sine-Wave 10 1 10 100 Number of Cycles at 60 Hz Figure 5. Maximum Non-Repetitive Peak Forward Surge Current E-mail: [email protected] 3 of 3 Web Site: www.taychipst.com