TPSMC6.8 THRU TPSMC43A AUTOMOTIVE SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR Breakdown Voltage - 6.8 to 43 Volts Peak Pulse Power - 1500 Watts DO-214AB Modified J-Bend PA TE N TE D FEATURES 0.126 (3.20) 0.114 (2.90) 0.245 (6.22) 0.220 (5.59) 0.280 (7.11) 0.260 (6.60) 0.012 (0.305) 0.006 (0.152) 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.008 (0.203) MAX. 0.030 (0.76) ♦ Designed for under the hood surface mount applications ♦ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ♦ Easy pick and place ♦ Low profile package ♦ Built-in strain relief ♦ Ideal for automated placement ♦ Exclusive patented PAR™ oxide passivated chip construction ♦ 1500W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% ♦ Excellent clamping capability ♦ Low incremental surge resistance ♦ Fast response time: typically less than 1.0ps from 0 Volts to V(BR) ♦ For devices with V(BR)≥10V ID are typically less than 1.0µA at TA=150°C ♦ High temperature soldering: 250°C/10 seconds at terminals 0.320 (8.13) 0.305 (7.75) Dimensions in inches and (millimeters) Available in uni-directional only MECHANICAL DATA Case: JEDEC DO-214AB molded plastic body over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes positive end (cathode) Mounting Position: Any Weight: 0.007 ounces, 0.2 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. SYMBOLS VALUE UNITS Peak pulse power dissipation with a 10/1000µs waveform (NOTES 1, 2, FIG. 3) PPPM Minimum 1500 Watts Peak power pulse current with a 10/1000µs waveform (NOTE 1, FIG. 1) IPPM SEE TABLE 1 Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) (NOTES 2, 3) IFSM 200.0 Amps VF 3.5 Volts TJ, TSTG -65 to +185 °C Maximum instantaneous forward voltage at 100A (NOTE 3) Operating junction and storage temperature range NOTES: (1) Non-repetitive current pulse, per Fig.3 and derated above TA=25°C per Fig. 2 (2) Mounted on 0.31 X 0.31” (8.0 X 8.0mm) copper pads to each terminal (3) Measured on 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minute maximum 1/27/99 ELECTRICAL CHARACTERISTICS at (TA=25°C unless otherwise noted) TABLE 1 Device Device Marking Code Breakdown Voltage V(BR) (Volts) (NOTE 1) Min. Max. Test Current at IT (mA) Stand-off Voltage VWM (Volts) Maximum Reverse Leakage at VWM IR (µA) Maximum Reverse Leakage at VWM, TJ =150°C ID (µA) Maximum Peak Pulse Surge Current IPPM (NOTE 2) (Amps) Maximum Clamping Voltage at IPP Vc (Volts) TPSMC6.8 DDP 6.12 7.48 10.0 5.50 1000 10000 139.0 10.8 TPSMC6.8A DEP 6.45 7.14 10.0 5.80 1000 10000 143.0 10.5 TPSMC7.5 DFP 6.75 8.25 10.0 6.05 500 5000 128.0 11.7 TPSMC7.5A DGP 7.13 7.88 10.0 6.40 500 5000 133.0 11.3 TPSMC8.2 DHP 7.38 9.02 10.0 6.63 200 2000 120.0 12.5 TPSMC8.2A DKP 7.79 8.61 10.0 7.02 200 2000 124.0 12.1 TPSMC9.1 DLP 8.19 10.0 1.0 7.37 50 500 109.0 13.8 TPSMC9.1A DMP 8.65 9.55 1.0 7.78 50 500 112.0 13.4 TPSMC10 DNP 9.00 11.0 1.0 8.10 20 200 100.0 15.0 TPSMC10A DPP 9.50 10.5 1.0 8.55 20 200 103.0 14.5 TPSMC11 DQP 9.90 12.1 1.0 8.92 5.0 50 92.6 16.2 TPSMC11A DRP 10.5 11.6 1.0 9.40 5.0 50 96.2 15.6 TPSMC12 DSP 10.8 13.2 1.0 9.72 2.0 10 86.7 17.3 TPSMC12A DTP 11.4 12.6 1.0 10.2 2.0 10 89.8 16.7 TPSMC13 DUP 11.7 14.3 1.0 10.5 2.0 10 78.9 19.0 TPSMC13A DVP 12.4 13.7 1.0 11.1 2.0 10 82.4 18.2 TPSMC15 DWP 13.5 16.5 1.0 12.1 2.0 10 68.2 22.0 TPSMC15A DXP 14.3 15.8 1.0 12.8 2.0 10 70.8 21.2 TPSMC16 DYP 14.4 17.6 1.0 12.9 2.0 10 63.8 23.5 TPSMC16A DZP 15.2 16.8 1.0 13.6 2.0 10 66.7 22.5 TPSMC18 EDP 16.2 19.8 1.0 14.5 2.0 10 56.6 26.5 TPSMC18A EEP 17.1 18.9 1.0 15.3 2.0 10 59.5 25.2 TPSMC20 EFP 18.0 22.0 1.0 16.2 2.0 10 51.5 29.1 TPSMC20A EGP 19.0 21.0 1.0 17.1 2.0 10 54.2 27.7 TPSMC22 EHP 19.8 24.2 1.0 17.8 2.0 10 47.0 31.9 TPSMC22A EKP 20.9 23.1 1.0 18.8 2.0 10 49.0 30.6 TPSMC24 ELP 21.6 26.4 1.0 19.4 2.0 10 43.2 34.7 TPSMC24A EMP 22.8 25.2 1.0 20.5 2.0 10 45.2 33.2 TPSMC27 ENP 24.3 29.7 1.0 21.8 2.0 10 38.4 39.1 TPSMC27A EPP 25.7 28.4 1.0 23.1 2.0 10 40.0 37.5 TPSMC30 EQP 27.0 33.0 1.0 24.3 2.0 10 34.5 43.5 TPSMC30A ERP 28.5 31.5 1.0 25.6 2.0 10 36.2 41.4 TPSMC33 ESP 29.7 36.3 1.0 26.8 2.0 10 31.4 47.7 TPSMC33A ETP 31.4 34.7 1.0 28.2 2.0 10 32.8 45.7 TPSMC36 EUP 32.4 39.6 1.0 29.1 2.0 10 28.8 52.0 TPSMC36A EVP 34.2 37.8 1.0 30.8 2.0 10 30.1 49.9 TPSMC39 EWP 35.1 42.9 1.0 31.6 2.0 10 26.6 56.4 TPMSC39A EXP 37.1 41.0 1.0 33.3 2.0 10 27.8 53.9 TPSMC43 EYP 38.7 47.3 1.0 34.8 2.0 10 24.2 61.9 TPSMC43A EZP 40.9 45.2 1.0 36.8 2.0 10 25.3 59.3 NOTES: (1) V(BR) measured after IT applied for 300µs, IT=square wave pulse or equivalent (2) Surge current waveform per Fig. 3 and derate per Fig. 2 (3) All terms and symbols are consistent with ANSI/IEEE C62.35 MAXIMUM RATINGS AND CHARACTERISTIC CURVES TPSMC6.8 THRU TPSMC43A FIG. 1 - PEAK PULSE POWER RATING CURVE PPPM, PEAK PULSE POWER, kW 100 NON-REPETITIVE PULSE WAVEFORM SHOWN in FIG. 3 TA = 25°C 10 1.0 0.31 x 0.31” (8.0 x 8.0mm) COPPER PAD AREAS 0.1 0.1µs 100µs 10µs 1.0µs 10ms 1.0ms td, PULSE WIDTH, sec. PEAK PULSE POWER (PPP) or CURRENT (IPP) DERATING IN PERCENTAGE, % FIG. 2 - PULSE DERATING CURVE 100 75 50 25 0 0 25 50 75 100 125 150 175 200 TA, AMBIENT TEMPERATURE, °C FIG. 3 - PULSE WAVEFORM IPPM, PEAK PULSE CURRENT, % 150 tr=10µsec. PULSE WIDTH (td) is DEFINED as the POINT WHERE the PEAK CURRENT DECAYS to 50% of IPP PEAK VALUE IPPM 100 HALF VALUE - IPP 2 10/1000µsec. WAVEFORM as DEFINED by R.E.A. 50 0 td 0 1 2 t, TIME, ms 3 4 MAXIMUM RATINGS AND CHARACTERISTIC CURVES TPSMC6.8 THRU TPSMC43A FIG. 4 - TYPICAL JUNCTION CAPACITANCE 10,000 TJ=25°C f=1 MHz Vsig=50mVp-p MEASURED at ZERO BIAS CJ, CAPACITANCE , pF 1,000 MEASURED AT STAND-OFF VOLTAGE, VWM 100 10 1 100 200 10 V(BR), BREAKDOWN VOLTAGE, VOLTS IFSM, PEAK FORWARD SURGE CURRENT, AMPERES FIG. 5 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 200 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) TJ=TJ max. 100 10 1 10 NUMBER OF CYCLES AT 60 HZ 100