TPSMC6.8 ~ TPSMC43A AUTOMOTIVE SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VBR : 6.8 - 43 Volts SMC (DO-214AB) PPK : 1500 Watts 0.060(1.52) 0.260(6.60) * 1500W peak pulse power capability with a 10/1000ms waveform, repetition rate (duty cycle): 0.01% * Excellent clamping capability * Low incremental surge resistance * Very fast response time * For devices with V(BR) ? 10V ID are typically less than 1.0mA at Ta = 150?C * Pb / RoHS Free 0.280(7.11) FEATURES : 0.3 05(7.75) 0.320(8.13) 0.030(0.76) 0.008(0.203) 0.004(0.102) 0.121(3.07) 0.012(0.305) 0.115(2.92) 0.006(0.152) 0.245(6.22) 0.103(2.62 ) 0.220(5.59) 0.079(2.00 ) Dimensions in inches and (millimeter) MECHANICAL DATA * Case : SMC Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end except Bipolar. * Mounting position : Any * Weight : 0.21 grams Maximum Ratings and Thermal Characteristics Rating at 25 °C ambient temperature unless otherwise specified. Parameter Peak Pulse Power Dissipation with a 10/1000 µs waveform (1)(2) Fig.5 Peak power pulse current with a 10/1000?s waveform (1) Fig.2 Peak Forward Surge Current, 8.3ms Single Half Sine-Wave (2)(3) Maximum instantaneous forward voltage at 100A(3) Operating and Storage Temperature Range Symbol Value Unit PPPM Minimum 1500 W IPPM See Next Table A IFSM 200 A VF 3.5 V TJ, TSTG - 65 to + 185 °C Notes : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 °C per Fig. 1 (2) Mounted on 0.31 x 0.31” (8.0 x 8.0mm) copper pads to each terminal (3) Measured on 8.3ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minute maximum Page 1 of 3 Rev. 02 : March 25, 2005 ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified Type V BR (V) Min. Max. TPSMC6.8 TPSMC6.8A TPSMC7.5 TPSMC7.5A TPSMC8.2 TPSMC8.2A TPSMC9.1 TPSMC9.1A TPSMC10 TPSMC10A TPSMC11 TPSMC11A TPSMC12 TPSMC12A TPSMC13 TPSMC13A TPSMC15 TPSMC15A TPSMC16 TPSMC16A TPSMC18 TPSMC18A TPSMC20 TPSMC20A TPSMC22 TPSMC22A TPSMC24 TPSMC24A TPSMC27 TPSMC27A TPSMC30 TPSMC30A TPSMC33 TPSMC33A TPSMC36 TPSMC36A TPSMC39 TPSMC39A TPSMC43 TPSMC43A It (mA) V RWM (V) Maximum Reverse Leakage @ V RWM IR (µA) 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 1000 1000 500 500 200 200 50 50 20 20 5.0 5.0 2.0 2.0 2.0 2.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Breakdown Voltage @ It (Note 1) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 Working Peak Reverse Voltage Maximum Reverse Leakage @ V RWM, Tj=150 °C ID (µA) Maximum Peak Pulse Surge Current IPPM(2) (A) Maximum Clamping Voltage @ I PPM V RSM (V) 10000 10000 5000 2000 2000 500 500 200 200 50 50 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 139 143 128 132 120 124 109 112 100 103 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 59.5 51.5 54.2 47.0 49.0 43.2 45.2 38.4 40.0 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 Notes : (1) VBR measured after It applied for 300 µs., It = square wave pulse or equivalent. (2) Surge current waveform per Fig. 5 and derate per Fig. 1 (3) "PSMC" will be omitted in marking on the diode. Page 2 of 3 Rev. 02 : March 25, 2005 FIG.1 - PULSE DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 120 200 PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE (%) RATING AND CHARACTERISTIC CURVES ( TPSMC6.8 - TPSMC43A ) 100 80 60 40 20 0 100 80 60 40 20 0 0 25 50 75 100 125 150 175 1 2 Ta, AMBIENT TEMPERATURE, ( °C) 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL JUNCTION CAPACITANCE FIG.4 - PULSE RATING CURVE 10000 100 TJ = 25C f = 1MHz Vsig = 50mVp-p Pp,PEAK POWER (kW) CJ - JUNCTION CAPACITANCE , pF TJ = TJ max 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD VR measured at zero bias 1000 100 VR measured at stand-off voltage, VWM 10 1 10 100 200 V(BR) , BREAKDOWN VOLTAGE (V) 10 1.0 Ta = 25?C Non-repetitive pulse waveform shown in Fig. 5 0.1 0.1µs 1.0µs 10µs 1.0ms 100µs 10ms td, PULSE WIDTH FIG.5 - PULSE WAVEFORM IPPM, PEAK PULSE CURRENT - % Tr = 10µs 100 Peak Value IPPM TJ=25 °C Pulse Width (tp) is defined as that point where the peak current decays to 50% of IRSM Half Value - IPPM 2 50 10X1000 Waveform as defined by R.E.A. tp 0 0 1.0 2.0 3.0 4.0 t, TIME(ms) Page 3 of 3 Rev. 02 : March 25, 2005