Optoway TRS-7110G 1 *********************************************************************************************************************************************************************** TRS-7110G / TRS-7110CG / TRS-7110TG / TRS-7110TCG / TRS-7110FG / TRS-7110FCG 3.3V / 1310 nm / 1.25 Gbps RoHS Compliant Optical Single-Mode Transceiver ********************************************************************************************************************************************************************** FEATURES DESCRIPTION l l l l l l l l l l l l l The TRS-7110G series single mode transceivers is low power, high performance module for bi-directional serial optical data communications such Gigabit Ethernet and Fibre Channel This module is designed for single mode fiber and operates at a nominal wavelength of 1310 nm. The transmitter section uses a multiple quantum well laser and is a class 1 laser compliant according to International Safety Standard IEC-825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. A PECL logic interface simplifies interface to external circuitry. Duplex SC Single Mode Transceiver: TRS-7110G Duplex ST Single Mode Transceiver: TRS-7110TG Duplex FC Single Mode Transceiver: TRS-7110FG Compliant with IEEE-802.3z Gigabit Ethernet Industry Standard 1 x 9 Footprint Single +3.3 V Power Supply RoHS Compliant 0 to 70oC Operating: TRS-7110G -40 to 85oC Operating:TRS-7110AG LVPECL Signal Detect Output: TRS-7110G LVTTL Signal Detect Output: TRS-7110CG Wave Solderable and Aqueous Washable Class 1 Laser International Safety Standard IEC 825 Compliant LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. APPLICATIONS l Switch to Switch Interface l High Speed Interface for File Servers l High Performance Desktops ORDER INFORMATION P/No. TRS-7110G TRS-7110AG Bit Rate 1000 Distance Wavelength Voltage Package Temp. TX Power RX Sens. RoHS BASE (Mb/s) (km) (nm) (V) (oC) (dBm) (dBm) Compliant 1250 LX / LH 10 1310 3.3 1X9 SC/ST/FC 0 to 70 -3 to -9 -21 Y 1250 LX / LH 10 1310 3.3 1X9 SC/ST/FC -40 to 85 -3 to -9 -21 Y Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Symbol Tstg Topr Soldering Temperature Power Supply Voltage Input Voltage --Vcc --- Output Current Iout Min -40 0 -40 Units o C o C 0 GND Max 85 70 85 260 4.5 Vcc 0 30 mA Min 3.1 0 -40 Typ 3.3 Max 3.5 70 85 1300 240 o C V V Notes TRS-7110G TRS-7110AG 10 seconds on leads only Recommended Operating Conditions Parameter Power Supply Voltage Operating Temperature Symbol Vcc Topr Data Rate Power Supply Current Icc 1250 Units V o C / TRS-7110G o C / TRS-7110AG Mb/s mA *********************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2005 V4.0 Optoway TRS-7110G 2 ********************************************************************************************************************************************************************** Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V) Parameter Optical Optical Transmit Power Output Center Wavelength Output Spectrum Width Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Relative Intensity Noise Total Jitter Electrical Data Input Current – Low Data Input Current – High Differential Input Voltage Data Input Voltage – Low Data Input Voltage -- High Symbol Min Typ Max Units Notes Po -9 1270 λ --∆λ ER 9 Compliant with IEEE 802.3z tr tf RIN TJ --1310 ----- -3 1355 2.5 --- dBm nm nm dB 1 0.26 0.26 -120 0.227 ns ns dB/Hz ns IIL IIH VIH - VIL VIL - VCC VIH - VCC -350 350 300 -2.0 -1.1 -1.58 -0.74 µA µA mV V V RMS (σ) 20% to 80% Values 20% to 80% Values 2 3 3 Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 27-1 PRBS. 3. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL inputs. Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3. 5V) Parameter Optical Sensitivity Maximum Input Power Signal Detect -- Asserted Signal Detect -- Deasserted Signal detect -- Hysteresis Wavelength of Operation Electrical Data Output Voltage – Low Data Output Voltage – High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Signal Detect Output Voltage -- Low Signal Detect Output Voltage -- High Symbol Min Typ Max Units Notes --Pin Pa Pd ---3 ---31 1.0 1100 --- -21 ---21 --- dBm dBm dBm dBm dB nm 1 VOL - VCC VOH - VCC VOL - VCC VOH - VCC VSDL VSDH -2.0 -1.1 -2.0 -1.1 --------- 1600 -1.58 -0.74 -1.58 -0.74 0.5 2.0 V V V V V V Transition: low to high Transition: high to low 2 2 TRS-7110G TRS-7110CG Notes: 1. Minimum sensitivity and saturation levels at BER=1E-12 for a 2 7-1 PRBS at ER= 9 dB. 2. These outputs are compatible with 10K, 10KH and 100K ECL and PECL outputs. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2005 V4.0 Optoway TRS-7110G 3 ********************************************************************************************************************************************************************** CONNECTION DIAGRAM Receiver Signal Ground 1 (Rx GND) Receiver Data Out 2 (RD+) Receiver Data Out Bar 3 (RD−) Signal Detect 4 (SD) Receiver Power Supply 5 (Rx Vcc) Transmitter Power Supply 6 (Tx Vcc) Transmitter Data In Bar 7 (TD−) Transmitter Data In 8 (TD+) Transmitter Signal Ground 9 (Tx GND) PIN 1 2 3 4 5 6 7 8 9 Symbol Rx GND RD+ RD− SD Rx Vcc Tx Vcc TD− TD+ Tx GND N/C TOP VIEW N/C Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal +3.3V dc power for the receiver section +3.3V dc power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this plan to the transmitter ground plane RECOMMENDED CIRCUIT SCHEMATIC Transceiver LD Driver SerDes IC TX GND 9 TD+ 8 VCC 3.3V TD+ 0.1uF Z=50R 100R LVPECL TD- 7 TD0.1uF Z=50R TX Vcc 1uH 6 Vcc 3.3V 10nF 10uF VCC 3.3V 1uH R1 RX Vcc 5 SD Level 10nF 10uF R2 VCC 3.3V SD 4 RD0.1uF POST 3 RDZ=50R R7 180R LVPECL Amp RD+ 0.1uF 2 RD+ Z=50R 180R RX GND 1 CDR or PHY DEVICE For TTL SD Level, R1=R2=N.C., R7=100 ohm For PECL SD Level, R1=130 ohm, R2=82 ohm, R7=100 ohm The split-load terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc and Tx Vcc. A GND plane under the module is required for good EMI and sensitivity performance. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2005 V4.0 Optoway TRS-7110G 4 ********************************************************************************************************************************************************************** PACKAGE DIAGRAM Units in mm 1) SC Type With Extended Shielding TX OPTICAL RX OPTICAL TRS-7110-EMG / TRS-7110C-EMG 2) ST Type TX OPTICAL RX OPTICAL TRS-7110TG / TRS-7110TCG ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2005 V4.0 Optoway TRS-7110G 5 ********************************************************************************************************************************************************************** 3) FC Type 12.7 TX OPTICAL RX OPTICAL 2.54*8 20.32 O1.3 20.32 13.7 10 10.18 0.75 5.97 13.9 25.4 34.5MAX TRS-7110FG / TRS-7110FCG Note: Specifications subject to change without notice. ***************************************************************************************************************************************************************************** OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 E-mail: [email protected] http: // www.optoway.com.tw 10/1/2005 V4.0