TS9011 250mA Low Quiescent Current CMOS LDO SOT-23 Pin Definition: 1. Ground 2. Output 3. Input SOT-89 Pin Definition: 1. Ground 2. Input 3. Output TO-92 Pin Definition: 1. Ground 2. Input 3. Output General Description TS9011 is a positive voltage regulator developed utilizing CMOS technology featured very low power consumption, low dropout voltage and high output voltage accuracy. Built in low on-resistor provides low dropout voltage and large output current. A 1uF or greater can be used as an output capacitor. TS9011 are prevented device failure under the worst operation condition with both thermal shutdown and current fold-back. These series are recommended for configuring portable devices and large current application, respectively. Features ● ● ● ● ● ● Ordering Information Dropout Voltage Typically 0.4V@ Io=200mA (Vo=5V) Output Current up to 250mA Low Power Consumption, 2uA(typ) @ Vo=5V Output Voltage ±2% Internal Current Limit Thermal Shutdown Protection Part No. ● Packing SOT-23 3Kpcs / 7” Reel TS9011xCY RM TS9011xCT A3 SOT-89 TO-92 1Kpcs / 7” Reel 2Kpcs / Ammo TS9011xCT B0 TO-92 1Kpcs / Bulk Note: Where x denotes voltage option, available are A=1.5V D=1.8V K=2.5V P=3.0V S=3.3V 5=5V Contact factory for additional voltage options. Applications ● ● ● ● ● Package TS9011xCX RF Battery-operated systems Microprocessor reset circuitry Memory battery back-up circuits Power-on reset circuits Power failure detection System battery life and charge voltage monitors Block Diagram Typical Application Circuit * Tantalum capacitor for Input & Output capacitor are recommended 1/1 Version: E07 TS9011 250mA Low Quiescent Current CMOS LDO Absolute Maximum Rating Parameter Input Supply Voltage Output Current Symbol Limit Unit VIN IO 12 PD / (VIN – VO) V V SOT-23 Power Dissipation SOT-89 TO-92 SOT-23 SOT-89 TO-92 0.30 PD 0.50 0.625 333 Thermal Resistance - Junction to Ambient RӨJA 200 160 Operating Ambient Temperature TOPR -40 ~ +85 Junction Temperature Range TJ -40 ~ +150 Storage Temperature Range TSTG -65 ~ +150 Notes: Stress above the listed absolute rating may cause permanent damage to the device. W o C/W o C C o C o Electrical Characteristics (Ta = 25oC, unless otherwise noted) Parameter Output Voltage Maximum Output Current Input Stability Load Regulation (Note1) Dropout Voltage (Note 2) Conditions VIN=Vo + 1V, Io =40mA, TS90115 TS9011S TS9011P TS9011K TS9011D TS9011A VIN=Vo+1V, VO+1V ≤ Vin ≤ VO+2V, Io=1mA VIN=Vo+1V, TS90115 1mA≤IL≤100mA TS9011S TS9011P VIN=Vo+1V, TS9011K 1mA≤IL≤80mA TS9011D TS9011A Io=250mA TS90115 Io=200mA TS9011S Io=160mA TS9011P Io=160mA TS9011K Io=120mA TS9011D Io=100mA TS9011A VIN=Vo+1V, Io=0A VOUT < 0.4V At f=100KHz, Io=10mA, Min Typ Max 4.90 3.23 2.94 2.45 1.76 1.47 250 -- 5.0 3.3 3.0 2.5 1.8 1.5 -0.2 5.10 3.36 3.06 2.55 1.83 1.53 -0.3 -- 40 80 Unit V mA % mV -- 40 90 ---------- 400 400 400 400 400 850 2 400 30 600 650 700 700 750 1000 5 --- mV Quiescent Current uA Output Current Limit mA Power Supply Rejection Ratio dB Output Voltage Temperature o -100 -ppm/ C Coefficient (Note 3) Notes: 1. Regulation is measured at constant junction temperature, using pulsed ON time. 2. Dropout is measured at constant junction temperature, using pulsed ON time, and the criterion is VOUT inside target value +/-2%. 3. Guaranteed by design. 2/2 Version: E07 TS9011 250mA Low Quiescent Current CMOS LDO Electrical Characteristics Curve (Ta = 25oC, unless otherwise noted) Figure 1. Output Voltage vs. Output Current Figure 2. Output Voltage vs. Input Voltage Figure 3. Quiescent Current vs. Input Voltage Figure 4. Short Circuit Current vs. Input Voltage 3/3 Version: E07 TS9011 250mA Low Quiescent Current CMOS LDO TO-92 Mechanical Drawing DIM A B C D E F G H TO-92 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 4.30 4.70 0.169 0.185 4.30 4.70 0.169 0.185 13.53 (typ) 0.532 (typ) 0.39 0.49 0.015 0.019 1.18 1.28 0.046 0.050 3.30 3.70 0.130 0.146 1.27 1.31 0.050 0.051 0.33 0.43 0.013 0.017 Marking Diagram Y = Year Code M = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) L = Lot Code X = Fixed Output Voltage Code A=1.5V, D=1.8V, K=2.5V, P=3.0V, S=3.3V, 5=5.0V. 4/4 Version: E07 TS9011 250mA Low Quiescent Current CMOS LDO SOT-89 Mechanical Drawing DIM A B C D E F G H I J SOT-89 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX 4.40 4.60 0.173 0.181 1.40 1.75 0.055 0.069 2.40 2.60 0.094 0.102 0.36 0.48 0.014 0.018 1.40 1.60 0.054 0.063 2.90 3.10 0.114 0.122 0.89 1.20 0.035 0.047 -4.25 -0.167 1.40 1.60 0.055 0.068 0.38 0.43 0.014 0.017 Marking Diagram Y = Year Code M = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) L = Lot Code X = Fixed Output Voltage Code A=1.5V, D=1.8V, K=2.5V, P=3.0V, S=3.3V, 5=5.0V. 5/5 Version: E07 TS9011 250mA Low Quiescent Current CMOS LDO SOT-23 Mechanical Drawing DIM A A1 B C D E F G H I J SOT-23 DIMENSION MILLIMETERS INCHES MIN MAX MIN MAX. 0.95 BSC 0.037 BSC 1.9 BSC 0.074 BSC 2.60 3.00 0.102 0.118 1.40 1.70 0.055 0.067 2.80 3.10 0.110 0.122 1.00 1.30 0.039 0.051 0.00 0.10 0.000 0.004 0.35 0.50 0.014 0.020 0.10 0.20 0.004 0.008 0.30 0.60 0.012 0.024 5º 10º 5º 10º Marking Diagram E = Product Code Y = Year Code M = Month Code (A=Jan, B=Feb, C=Mar, D=Apl, E=May, F=Jun, G=Jul, H=Aug, I=Sep, J=Oct, K=Nov, L=Dec) L = Lot Code X = Fixed Output Voltage Code A=1.5V, D=1.8V, K=2.5V, P=3.0V, S=3.3V, 5=5.0V. 6/6 Version: E07 TS9011 250mA Low Quiescent Current CMOS LDO Notice Specifications of the products displayed herein are subject to change without notice. TSC or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, to any intellectual property rights is granted by this document. Except as provided in TSC’s terms and conditions of sale for such products, TSC assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of TSC products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify TSC for any damages resulting from such improper use or sale. 7/7 Version: E07