SMD Transient Voltage Suppressor TVP06B6V8-G Thru. TVP06B601-G Breakdown Voltage: 6.8 ~ 600Volts Power Dissipation: 600 Watts RoHS Device Features SMB/DO-214AA -Glass passivated chip. -Low leakage. -Uni and Bidirectional unit. 0.155(3.94) 0.130(3.30) 0.087(2.20) 0.077(1.96) -Excellent clamping capability. -Very fast response time. 0.191(4.85) 0.171(4.35) -RoHS compliant. Mechanical Data 0.012(0.30) 0.006(0.15) -Case: Molded plastic,JEDEC SMB/DO-214AA -Epoxy: UL 94V-0 rate flame retardant. 0.096(2.44) 0.084(2.13) . -Terminals: solderable per MIL-STD-750, method 2026 0.008(0.20) 0.001(0.02) 0.060(1.52) 0.030(0.75) 0.216(5.50) 0.201(5.10) -Polarity: Cathode band denoted. -Approx. weight: 0.108 grams Dimensions in inches and (millimeter) Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Symbol Value Units Peak power dissipation on 10/1000μS waveform (Note 1 ) PPP 600 W Peak pulse current on 10/1000μS waveform (Note 1) IPP Steady state power dissipation at TL=75 O C See Next Table A PD 5.0 W Peak forward surge current, 8.3mS single half sine-wave uni-directional only (Note 2) IFSM 100 A Maximum instantaneous forward voltage at 25.0A for uni-directional only (Note 3) VF 3.5/5.0 V Operation junction temperature TJ -55 to +150 O C TSTG -55 to +150 O C Storage temperature range Note: O 1. Non-repetitive current pulse, per Fig. 5 and derated above TA=25 C per Fig.1 2. Measured on 8.3 mS single half sine-wave or equivalent square wave, duty cycle=4 pulse per minute maximum. 3. VF<3.5V for devices of VBR <200V and VF <5.0V for devices of VBR >201V REV:A QW-BTV18 Page 1 SMD Transient Voltage Suppressor Electrical Characteristics (TVP06B6V8-G Thru. TVP06B601-G) Part No. TVP06B6V8A(CA)-G TVP06B7V5A(CA)-G TVP06B8V2A(CA)-G TVP06B9V1A(CA)-G TVP06B10A(CA)-G TVP06B11A(CA)-G TVP06B12A(CA)-G TVP06B13A(CA)-G TVP06B15A(CA)-G TVP06B16A(CA)-G TVP06B18A(CA)-G TVP06B20A(CA)-G TVP06B22A(CA)-G TVP06B24A(CA)-G TVP06B27A(CA)-G TVP06B30A(CA)-G TVP06B33A(CA)-G TVP06B36A(CA)-G TVP06B39A(CA)-G TVP06B43A(CA)-G TVP06B47A(CA)-G TVP06B51A(CA)-G TVP06B56A(CA)-G TVP06B62A(CA)-G TVP06B68A(CA)-G TVP06B75A(CA)-G TVP06B82A(CA)-G TVP06B91A(CA)-G TVP06B101A(CA)-G TVP06B111A(CA)-G TVP06B121A(CA)-G TVP06B131A(CA)-G TVP06B151A(CA)-G TVP06B161A(CA)-G TVP06B171A(CA)-G TVP06B181A(CA)-G TVP06B201A(CA)-G TVP06B221A(CA)-G TVP06B251A(CA)-G TVP06B301A(CA)-G TVP06B351A(CA)-G TVP06B381A(CA)-G TVP06B401A(CA)-G TVP06B441A(CA)-G TVP06B501A(CA)-G TVP06B521A(CA)-G TVP06B551A(CA)-G TVP06B601A(CA)-G V RWM (V) 5.8 6.4 7.0 7.8 8.6 9.4 10.2 11.1 12.8 13.6 15.3 17.1 18.8 20.5 23.1 25.6 28.2 30.8 33.3 36.8 40.2 43.6 47.8 53.0 58.1 64.1 70.1 77.8 85.5 94.0 102.0 111.0 128.0 136.0 145.0 154.0 171.0 185.0 214.0 256.0 299.3 324.9 342.0 376.2 427.5 444.6 470.3 513.0 Absolute Maximum Rating (TA =25 °C) V BR Min. V BR Max. IT I FSM (V) 6.46 7.13 7.79 8.65 9.50 10.45 11.40 12.35 14.25 15.20 17.10 19.0 20.90 22.80 25.65 28.50 31.35 34.20 37.05 40.85 44.65 48.45 53.20 58.90 64.60 71.25 77.90 86.45 95.00 104.50 114.00 123.50 142.50 152.00 161.50 171.00 190.00 209.00 237.50 285.00 332.50 361.00 380.00 418.00 475.00 494.00 522.50 570.00 (V) 7.14 7.88 8.61 9.56 10.50 11.55 12.60 13.65 15.75 16.80 18.90 21.00 23.10 25.20 28.35 31.50 34.65 37.80 40.90 45.15 49.35 53.55 58.80 65.10 71.40 78.75 86.10 95.55 105.00 115.50 126.00 136.50 157.50 168.00 178.50 189.00 210.00 231.00 262.50 315.00 367.50 399.00 420.00 462.00 525.00 546.00 577.50 630.00 (mA) 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 (A)@8.3mS 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Electrical Characteristic (TA =25 °C) Max V C I R @V RWM Marking Code IPP (V) 10.5 11.3 12.1 13.4 14.5 15.6 16.7 18.2 21.2 22.5 25.2 27.7 30.6 33.2 37.5 41.4 45.7 49.9 53.9 59.3 64.8 70.1 77.0 85.0 92.0 103.0 113.0 125.0 137.0 152.0 165.0 179.0 207.0 219.0 234.0 246.0 274.0 328.0 344.0 414.0 482.0 524.4 548.0 607.2 690.0 717.6 759.0 828.0 IPP (A) 57.14 53.10 49.59 44.78 41.38 38.46 35.93 32.97 28.30 26.67 23.81 21.66 19.61 18.07 16.00 14.49 13.13 12.02 11.13 10.12 9.26 8.56 7.79 7.06 6.52 5.83 5.31 4.80 4.38 3.95 3.64 3.35 2.90 2.74 2.56 2.44 2.19 1.83 1.74 1.45 1.24 1.14 1.09 0.99 0.87 0.84 0.79 0.72 (uA) 1000 500 200 50 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 UNI 6V8A 7V5A 8V2A 9V1A 10A 11A 12A 13A 15A 16A 18A 20A 22A 24A 27A 30A 33A 36A 39A 43A 47A 51A 56A 62A 68A 75A 82A 91A 100A 110A 120A 130A 150A 160A 170A 180A 200A 220A 250A 300A 350A 380A 400A 440A 500A 520A 550A 600A BI 6V8C 7V5C 8V2C 9V1C 10C 11C 12C 13C 15C 16C 18C 20C 22C 24C 27C 30C 33C 36C 39C 43C 47C 51C 56C 62C 68C 75C 82C 91C 100C 110C 120C 130C 150C 160C 170C 180C 200C 220C 250C 300C 350C 380C 400C 440C 500C 520C 550C 600C Note: 1) The available parts are “A” type only,the parts without A (VBR is ±10%) is not available. 2) Add suffix “C” or “CA” after part number to specify Bi-directional devices. 3) For Bi-Directional devices having VR of 10 volts and under, the IR limit is double. REV:A QW-BTV18 Page 2 SMD Transient Voltage Suppressor Rating and Characteristics Curves (TVP06B5V0-G Thru. TVP06B601-G) Fig.2 - Maximum Non-Repetitive Surge Current Fig.1 - Pulse Derating Curve 100 Mounted on 5mm×5mm copper pads IFSM, Peak Forward Surge Current (A) Peak Pulse Derating in Percentage of Peak Power or Current, (%) 140 120 100 80 60 40 20 8.3mS single half sine-wave (JEDEC method) TJ=TJ Max. 80 60 40 20 0 0 0 50 25 75 100 125 150 175 10 1 Ambient Temperature,TA (°C) Number of Cycle at 60Hz Fig.3 - Steady State Power Derating Curve Fig.4 - Peak Pulse Power Rating Curve 100 4.0 Peak Power, (kW) Steady State Power Dissipation, ( W ) 5.0 3.0 2.0 10 1 1.0 0 0.1 0 25 50 75 100 125 150 175 200 0.1 1 Lead Temperature ,TL ( °C) 10 100 1000 10000 Pulse Width,Td (μS) Fig.5 - Pulse Waveform Fig.6 - Typical Junction Capacitance 10000 120 Pulse width (td) is defined as the point where the peak current decay to 50% of Ipp tr=10μS 100 Bi-directional @zero bias Peak value, IPPM Junction Capacitance, (pF) Peak Pulse Current, (%) 100 Half value, IPP/2 50 10/1000μS waveform as defined by R.E.A. Uni-directional @zero bias 1000 Uni-directional @VRWM 100 10 td Bi-directional @VRWM O TJ=25 C f=1.0MHz 1 0 0 1 2 Time, (mS) 3 4 1 10 100 1000 Breakdown Voltage,VBR (V) REV:A QW-BTV18 Page 3 SMD Transient Voltage Suppressor Reel Taping Specification d P0 P1 Index hole F B P T E W C A 12 o 0 D2 D1 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... 10 pitches (min) ....... ....... Start 10 pitches (min) Direction of Feed DO-214AA (SMB) DO-214AA (SMB) SYMBOL A B C d D D1 D2 (mm) 3.67± 0.10 5.69 ± 0.10 4.50 (max) 1.55 + 0.10-0.0 330 50.0 MIN. 13.00 ± 0.20 (inch) 0.144± 0.004 0.224± 0.004 0.177 (max) 0.061+ 0.004-0.0 13.00 1.969 MIN. 0.512 ± 0.008 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 12.0 ± 0.30 18.4 MAX. (inch) 0.069 ± 0.004 0.217 ± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.472 ± 0.012 0.724 MAX REV:A Page 4 QW-BTV18 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Marking Code 1. C: COMCHIP 2. 1 2 C B : Package PKG SMB B 4 XXXX 3. XXX / XXXX: Marking code(see Page.2 ) 4. 3 : Cathod Band Suggested PAD Layout D DO-214AA (SMB) SIZE (mm) (inch) A A 4.50 0.177 E B 1.50 0.059 C 3.60 0.142 D 6.00 0.236 E 3.00 0.118 C B Standard Packaging Qty per Reel Reel Size (Pcs) (inch) 3,000 13 Case Type DO-214AA (SMB) REV:A Page 5 QW-BTV18 Comchip Technology CO., LTD.