TX-S
TESTING
New pin layout (LT type)
added. Ultra high sensitivity
realized at 50 mW nominal
operating power
Compliance with RoHS Directive
FEATURES
1. Nominal operating power:
High sensitivity of 50mW
By using the highly efficient polar
magnetic circuit “seesaw balance
mechanism”, a nominal operating
power of 50 mW (minimum operating
power of 32 mW) has been achieved.
2. Compact size
15.0(L) × 7.4(W) × 8.2(H) .591(L) ×
.291(W) × .323(H)
3. High contact reliability
High contact reliability is achieved by
the use of gold-clad twin crossbar
contacts, low-gas formation materials,
mold sealing the coil section, and by
controlling organic gas in the coil.
*We also offer a range of products
with AgPd contacts suitable for use
in low level load analog circuits
(Max. 10V DC 10 mA).
*SX relays designed for low level
loads are also available.
4. Outstanding surge resistance.
Surge breakdown voltage between
open contacts:
1,500 V 10×160 µsec. (FCC part 68)
Surge breakdown voltage between
contact and coil:
2,500 V 2×10 µsec. (Telcordia)
5. Low thermal electromotive force
(approx. 0.3 µV)
The structure of the mold-sealed body
block of the coil section achieves
nominal operating power of 50 mW
and high sensitivity, along with low
thermal electromotive force, reduced
to approximately 0.3 µV.
TX-S RELAYS
6. A range of surface-mount types is
also available.
SA: Low-profile surface-mount
terminal type
SL: High connection reliability surfacemount terminal type
SS: Space saving surface-mount
terminal type
7. Sealed construction allows
automatic washing.
TYPICAL APPLICATIONS
1. Communications
(XDSL, Transmission)
2. Measurement
3. Security
4. Home appliances, and audio/visual
equipment
5. Automotive equipment
6. Medical equipment
ORDERING INFORMATION
TXS 2
Contact arrangement
2: 2 Form C
Surface-mount availability
Nil: Standard PC board terminal type or self-clinching terminal type
SA: SA type
SL: SL type
SS: SS type
Operating function
Nil: Single side stable
L: 1 coil latching
L2: 2 coil latching
LT: 2 coil latching
Terminal shape
Nil: Standard PC board terminal or surface-mount terminal
H: Self-clinching terminal
Nominal coil voltage (DC)
1.5, 3, 4.5, 6, 9, 12, 24V
Contact material
Nil: Standard contact (Ag+Au clad)
1: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable)
Packing style
Nil: Tube packing
X: Tape and reel (picked from 1/3/4/5-pin side)
Z: Tape and reel packing (picked from the 8/9/10/12-pin side)
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TX-S
TYPES
1. Standard PC board terminal
Contact
arrangement
Nominal coil
voltage
2 Form C
1.5V DC
3V DC
4.5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXS2-1.5V
TXS2-3V
TXS2-4.5V
TXS2-6V
TXS2-9V
TXS2-12V
TXS2-24V
1 coil latching
Part No.
TXS2-L-1.5V
TXS2-L-3V
TXS2-L-4.5V
TXS2-L-6V
TXS2-L-9V
TXS2-L-12V
TXS2-L-24V
2 coil latching (L2)
Part No.
TXS2-L2-1.5V
TXS2-L2-3V
TXS2-L2-4.5V
TXS2-L2-6V
TXS2-L2-9V
TXS2-L2-12V
TXS2-L2-24V
2 coil latching (LT)
Part No.
TXS2-LT-1.5V
TXS2-LT-3V
TXS2-LT-4.5V
TXS2-LT-6V
TXS2-LT-9V
TXS2-LT-12V
TXS2-LT-24V
2 coil latching (L2)
Part No.
TXS2-L2-H-1.5V
TXS2-L2-H-3V
TXS2-L2-H-4.5V
TXS2-L2-H-6V
TXS2-L2-H-9V
TXS2-L2-H-12V
TXS2-L2-H-24V
2 coil latching (LT)
Part No.
TXS2-LT-H-1.5V
TXS2-LT-H-3V
TXS2-LT-H-4.5V
TXS2-LT-H-6V
TXS2-LT-H-9V
TXS2-LT-H-12V
TXS2-LT-H-24V
2 coil latching (L2)
Part No.
TXS2S-L2-1.5V
TXS2S-L2-3V
TXS2S-L2-4.5V
TXS2S-L2-6V
TXS2S-L2-9V
TXS2S-L2-12V
TXS2S-L2-24V
2 coil latching (LT)
Part No.
TXS2S-LT-1.5V
TXS2S-LT-3V
TXS2S-LT-4.5V
TXS2S-LT-6V
TXS2S-LT-9V
TXS2S-LT-12V
TXS2S-LT-24V
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2. Self-clinching terminal
Contact
arrangement
Nominal coil
voltage
2 Form C
1.5V DC
3V DC
4.5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXS2-H-1.5V
TXS2-H-3V
TXS2-H-4.5V
TXS2-H-6V
TXS2-H-9V
TXS2-H-12V
TXS2-H-24V
1 coil latching
Part No.
TXS2-L-H-1.5V
TXS2-L-H-3V
TXS2-L-H-4.5V
TXS2-L-H-6V
TXS2-L-H-9V
TXS2-L-H-12V
TXS2-L-H-24V
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
3. Surface-mount terminal
1) Tube packing
Contact
arrangement
Nominal coil
voltage
2 Form C
1.5V DC
3V DC
4.5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXS2S-1.5V
TXS2S-3V
TXS2S-4.5V
TXS2S-6V
TXS2S-9V
TXS2S-12V
TXS2S-24V
1 coil latching
Part No.
TXS2S-L-1.5V
TXS2S-L-3V
TXS2S-L-4.5V
TXS2S-L-6V
TXS2S-L-9V
TXS2S-L-12V
TXS2S-L-24V
: For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2) Tape and reel packing
Contact
arrangement
Nominal coil
voltage
2 Form C
1.5V DC
3V DC
4.5V DC
6V DC
9V DC
12V DC
24V DC
Single side stable
Part No.
TXS2S-1.5V-Z
TXS2S-3V-Z
TXS2S-4.5V-Z
TXS2S-6V-Z
TXS2S-9V-Z
TXS2S-12V-Z
TXS2S-24V-Z
1 coil latching
Part No.
TXS2S-L-1.5V-Z
TXS2S-L-3V-Z
TXS2S-L-4.5V-Z
TXS2S-L-6V-Z
TXS2S-L-9V-Z
TXS2S-L-12V-Z
TXS2S-L-24V-Z
2 coil latching (L2)
Part No.
TXS2S-L2-1.5V-Z
TXS2S-L2-3V-Z
TXS2S-L2-4.5V-Z
TXS2S-L2-6V-Z
TXS2S-L2-9V-Z
TXS2S-L2-12V-Z
TXS2S-L2-24V-Z
2 coil latching (LT)
Part No.
TXS2S-LT-1.5V-Z
TXS2S-LT-3V-Z
TXS2S-LT-4.5V-Z
TXS2S-LT-6V-Z
TXS2S-LT-9V-Z
TXS2S-LT-12V-Z
TXS2S-LT-24V-Z
: For each surface-mounted terminal identification, input the following letter. SA type: A, SL type: L, SS type: S
Standard packing: Tape and reel: 500 pcs.; Case: 1,000 pcs.
Notes: 1. Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available.
2. Please add “-1” to the end of the part number for AgPd contacts (low level load). (Ex. TXS2SA-1.5V-1-Z)
RATING
1. Coil data
1) Single side stable
Nominal coil
voltage
Pick-up voltage
(at 20°C 68°F)
Drop-out voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
1.5V DC
33.3mA
45Ω
3V DC
4.5V DC
6V DC
9V DC
12V DC
24V DC
16.7mA
11.1mA
8.3mA
5.6mA
4.2mA
2.9mA
180Ω
405Ω
720Ω
1,620Ω
2,880Ω
8,229Ω
80%V or less of
nominal voltage*
(Initial)
10%V or more of
nominal voltage*
(Initial)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
50mW
150%V of
nominal voltage
70mW
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TX-S
2) 1 coil latching
Nominal operating
current
[±10%] (at 20°C 68°F)
Coil resistance
[±10%] (at 20°C 68°F)
1.5V DC
23.3mA
64.3Ω
3V DC
4.5V DC
6V DC
9V DC
12V DC
24V DC
11.7mA
7.8mA
5.8mA
3.9mA
2.9mA
2.1mA
257Ω
579Ω
1,029Ω
2,314Ω
4,114Ω
11,520Ω
50mW
Coil resistance
[±10%] (at 20°C 68°F)
Nominal operating
power
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
80%V or less of
nominal voltage*
(Initial)
Reset voltage
(at 20°C 68°F)
80%V or less of
nominal voltage*
(Initial)
Nominal operating
power
Max. applied voltage
(at 20°C 68°F)
35mW
150%V of
nominal voltage
3) 2 coil latching (L2, LT)
Nominal coil
voltage
Set voltage
(at 20°C 68°F)
Reset voltage
(at 20°C 68°F)
Nominal operating
current
[±10%] (at 20°C 68°F)
Set coil
Reset coil
1.5V DC
3V DC
4.5V DC
6V DC
9V DC
12V DC
24V DC
80%V or less of
nominal voltage*
(Initial)
80%V or less of
nominal voltage*
(Initial)
Set coil
Reset coil
46.7mA
46.7mA
32.1Ω
32.1Ω
23.3mA
15.6mA
11.7mA
7.8mA
5.8mA
6.3mA
23.3mA
15.6mA
11.7mA
7.8mA
5.8mA
6.3mA
129Ω
289Ω
514Ω
1,157Ω
2,057Ω
3,840Ω
129Ω
289Ω
514Ω
1,157Ω
2,057Ω
3,840Ω
Set coil
Reset coil
70mW
70mW
150mW
150mW
Max. applied voltage
(at 20°C 68°F)
150%V of
nominal voltage
*Pulse drive (JIS C 5442-1986)
2. Specifications
Characteristics
Contact
Item
Arrangement
Initial contact resistance, max.
Contact material
Rating
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. switching current
Min. switching capacity (Reference value)*1
Single side stable
Nominal operating
1 coil latching
power
2 coil latching
Insulation resistance (Initial)
Electrical
characteristics
750 Vrms for 1min. (Detection current: 10mA)
1,800 Vrms for 1min. (Detection current: 10mA)
1,000 Vrms for 1min. (Detection current: 10mA)
Surge breakdown
voltage (Initial)
Between open contacts
Between contacts and coil
1,500 V (10×160µs) (FCC Part 68)
2,500 V (2×10µs) (Telcordia)
Max. 50°C
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 1A.)
Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.)
Max. 5 ms [Max. 5 ms] (Nominal coil voltage applied to the coil, excluding contact bounce
time.) (without diode)
Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10µs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5 mm
Min. 5×107 (at 180 cpm)
Min. 2×105 (1 A 30 V DC resistive) (at 20 cpm)
Ambient temperature: –40°C to +70°C –40°F to +158°F;
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 cpm
Approx. 2 g .071 oz
Release time [Reset time] (at 20°C 68°F)
Functional
Destructive
Functional
Vibration resistance
Destructive
Mechanical
Electrical
Shock resistance
Conditions
Conditions for operation, transport and storage*2
Max. operating speed (at rated load)
Unit weight
Min. 1,000MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
Between open contacts
Between contact and coil
Between contact sets
Operate time [Set time] (at 20°C 68°F)
Expected life
50 mW (1.5 to 12 V DC), 70 mW (24 V DC)
35 mW (1.5 to 12 V DC), 50 mW (24 V DC)
70 mW (1.5 to 12 V DC), 150 mW (24 V DC)
Breakdown voltage
(Initial)
Temperature rise (at 20°C 68°F)
Mechanical
characteristics
Specifications
2 Form C
Max. 100 mΩ (By voltage drop 6 V DC 1A)
Standard contact: Ag+Au clad, AgPd contact (low level load): AgPd+Au clad (stationary),
AgPd (movable)
1 A 30 V DC (resistive load)
30 W (DC) (resistive load)
110V DC
1A
10µA 10mV DC
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (AgPd contact type or SX relays are available for low level load switching [10V DC, 10mA max. level])
*2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
TX-S
REFERENCE DATA
1. Maximum switching capacity
2. Life curve
3. Mechanical life
1.0
0.5
0.4
0.3
Ratio against the rated voltage, %V
DC resistive load
(cosφ = 1)
No. of operations ×104
Contact current, A
Tested sample: TXS2-4.5V, 10 pcs.
Operating speed: 180 cpm
30V DC
resistive load
100
10
0.2
100
90
80
Pick-up voltage
70
Max.
60
Min.
50
40
Drop-out voltage
30
Max.
20
Min.
10
30
0
100
200
Contact voltage, V
0.5
0
1.0
Switching current, A
10
100
1,000 5,000
No. of operations, ×104
4. Electrical life (1 A 30 V DC resistive load)
5-(1). Coil temperature rise
Tested sample: TXS2-4.5V, 6 pcs.
Operating speed: 20 cpm
Tested sample: TXS2-4.5V, 6 pcs.
Point measured: Inside the coil
Ambient temperature: 25°C 77°F, 70°C 158°F
Change of contact resistance
100
90
90
80
Pick-up voltage
70
Max.
Min.
60
50
40
30
80
70
60
50
Max.
40
Max.
Min.
20
1A
1A
0A
0A
10
Min.
20
10
0
Room temperature :x
+70°C +158°F :x
30
Drop-out voltage
20
30
Temperature rise, °C
100
Contact resistance, mΩ
Ratio against the rated voltage, %V
Change of pick-up and drop-out voltage
10
0
10
5
15
0
20
0
10
5
No. of operations, ×104
15
0
20
90
100 110
No. of operations, ×104
120
130
140 150 160
Coil applied voltage, %V
5-(2). Coil temperature rise
6-(1). Operate and release time (with diode)
6-(2). Operate and release time (without diode)
Tested sample: TXS2-24V, 6 pcs.
Point measured: Inside the coil
Ambient temperature: 25°C 77°F, 70°C 158°F
Tested sample: TXS2-4.5V, 10 pcs.
Tested sample: TXS2-4.5V, 10 pcs.
7
20
1A
1A
0A
0A
10
7
Operate time
Release time
6
5
4
3
2
Max.
Min.
Max.
Min.
Operate and release time, ms
Temperature rise, °C
Room temperature :x
+70°C +158°F :x
Operate and release time, ms
30
1
0
90 100 110
120
130
140 150
160
Coil applied voltage, %V
Rate of change, %
Tested sample: TXS2-4.5V, 5 pcs.
–40 –20
0
30
20
Drop-out
voltage
x
x
10
Pick-up voltage
20 40 60 80
Ambient
–10 temperature, °C
4
80
Min.
3
2
0
100
90
110 120
Coil applied voltage, %V
Max.
Max.
Min.
80
90
100
110
120
Coil applied voltage, %V
8-(1). High frequency characteristics
(Isolation)
8-(2). High frequency characteristics
(Insertion loss)
Tested sample: TXS2-4.5V, 2 pcs.
Tested sample: TXS2-4.5V, 2 pcs.
Isolation, dB
7. Ambient temperature characteristics
5
1
Insertion loss, dB
0
Operate time
Release time
6
100
50
1.0
0.8
0.6
–20
0.4
–30
0.2
10
100
1,000
Frequency, MHz
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
10
100
Frequency, MHz
1,000
TX-S
9-(1). Malfunctional shock (single side stable)
9-(2). Malfunctional shock (latching)
10. Thermal electromotive force
Tested sample: TXS2-4.5V, 6 pcs.
Tested sample: TXS2-L2-4.5V, 6 pcs.
Tested sample: TXS2-4.5V, 6 pcs.
X’
Deenergized condition
Energized condition
Y
1000m/s
Y
Y’
X
Z
1000m/s2
1000m/s2
1000m/s
Z’
X
Z
Z’
2
2
1000m/s
X’
X’
1000m/s
X
1000m/s
Z’
x = 0.30
18
16
Z
1000m/s2
1000m/s2
2
20
Reset state
Set state
Y
2
2
1000m/s
X’
14
Quantity
X
Z
Z’
Y
Y’
12
10
8
2
6
4
1000m/s
Y’
2
1000m/s
Y’
2
2
0
0
0.15
0.25
0.35
0.45
0.55
Thermal electromotive force, µV
11-(2). Influence of adjacent mounting
11-(3). Influence of adjacent mounting
Tested sample: TXS2-4.5V, 6 pcs.
Tested sample: TXS2-4.5V, 6 pcs.
Tested sample: TXS2-4.5V, 6 pcs.
ON
10
5
Pick-up voltage
ON
Drop-out voltage
Rate of change, %
Rate of change, %
0
OFF OFF
–5
OFF
–15
ON
10
ON
5
Pick-up voltage
ON
0
Drop-out voltage
0
–5
–15
2 4 6 8 10 12 14 16
.079 .157 .236 .315 .394 .472 .551 .630
Inter-relay distance , mm inch
ON
10
ON
5
Pick-up voltage
ON
ON
Drop-out voltage OFF
–5
OFF
–10
OFF
OFF
0
15
0
OFF
–10
–10
Rate of change, %
ON
15
Rate of change, %
15
Rate of change, %
Rate of change, %
11-(1). Influence of adjacent mounting
–15
2 4 6 8 10 12 14 16
.079 .157 .236 .315 .394 .472 .551 .630
Inter-relay distance , mm inch
OFF
0
OFF
2 4 6 8 10 12 14 16
.079 .157 .236 .315 .394 .472 .551 .630
Inter-relay distance , mm inch
12. Pulse dialing test
0.08
µF
DC48V
–
458Ω
0.08
µF
458Ω
Wire spring relay
4
3
Ratio against the rated voltage, %V
+
Change of pick-up and drop-out voltage
Change of contact resistance
100
100
90
80
Pick-up voltage
Max.
Min.
70
60
50
40
Drop-out voltage
30
Max.
Min.
20
10
0
Contact resistance, mΩ
(35 mA 48V DC wire spring relay load)
Tested sample: TXS2-4.5V, 6 pcs.
90
80
70
60
50
40
Max.
30
Min.
20
10
0
10
20
30
40
No. of operation, ×10
50
0
4
Note: Data of surface-mount type are the same as those of PC board terminal type.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
0
10
20
30
40
No. of operation, ×104
50
TX-S
DIMENSIONS (mm inch)
The CAD data of the products with a
CAD Data
mark can be downloaded from: http://panasonic-electric-works.net/ac
1. Standard PC board terminal and Self clinching terminal
CAD Data
External dimensions (General tolerance: ±0.3 ±.012)
Single side stable and
2 coil latching type (L2, LT)
1 coil latching type
Type
15.00
.591
7.40
.291
0.50
.020
1.15
.045
5.08
.200
0.65
.026 8.20
.323
0.50
.020
1.15
.045
0.25
5.08 .010
.200
3.50
.138
2.54
.100
15.00
.591
5.08
.200
0.50
.020
1.15
.045
5.08
.200
15.00
.591
7.40
.291
0.50
.020
1.15
.045
0.25
5.08 .010
.200
10.16
.400
2.54
.100
12.7
.500
2.54
.100
5.08
.200
7.40
.291
8-1.0 dia.
8-.039 dia.
0.65 8.20
.026 .323
3.50
.138
2.54
.100
0.25
5.08 .010
.200
3.50
.138
2.54
.100
0.65
.026 8.20
.323
Self
clinching
terminal
2 coil latching type (L2, LT)
7.40
.291
15.00
.591
0.65 8.20
.026 .323
Standard
PC board
terminal
PC board pattern (Bottom view) (Tolerance: ±0.1 ±.004)
Single side stable and
1 coil latching type
5.08
.200
10-1.0 dia.
10-.039 dia.
3.50
.138
5.08
.200
(1.15)
2.54 (.045)
.100
0.25
5.08 .010
.200
Schematic (Bottom view)
Single side stable
+
–
1
12
1 coil latching
3 4 5
–
+
10 9 8
Direction indication
1
2 coil latching (L2)
3 4 5
12
10 9 8
Direction indication
(Deenergized condition)
(Reset condition)
1
3 4 5 6
+
–
+
–
12
10 9 8 7
2 coil latching (LT)
+
1
– 12
3 4 5 6
10 9 8 7
Direction indication
Direction indication
(Reset condition)
(Reset condition)
+
–
2. Surface-mount terminal
CAD Data
External dimensions (General tolerance: ±0.3 ±.012)
Type
Single side stable and
1 coil latching type
15
.591
8.2
8.4
.323 .331
0.5
.020
0.65
.026
5.08
.200
15
.591
7.4
.291
SA type
2.54
.100
5.08
.200
9.4±0.5
.370±.020
8.2
8.4
.323 .331
0.5
.020
0.65
.026
5.08
.200
2.54
.100
0.65
.026
0.5
.020
5.08
.200
2.54
.100
0.25
.010
0.65
.026
0.5
.020
5.08
.200
2.54
.100
15
.591
7.4
.291
0.65
.026
0.5
.020
5.08
.200
2.54
.100
5.08
.200
7.4±0.5
.291±.020
5.08
.200
9.4±0.5
.370±.020
0.5
.020
5.08
.200
2.54
.100
5.08
.200
7.4±0.5
.291±.020
5.08
.200
5.08
.200
2.54
.100
7.24
.285
1
3.16 .039
.124
5.08
.200
2.54
.100
7.24
.285
7.24
.285
1
2.16 .039
.085
0.25
.010
1
3.16 .039
.124
2.54
.100
0.25
.010
7.4
.291
0.65
.026
2.54
.100
2 coil latching type (L2, LT)
7.24
.285
1
3.16 .039
.124
8.2 Max.10
.323 .394
0.25
.010
5.08
.200
0.25
.010
7.4
.291
8.2 Max.10
.323 .394
SS type
1
3.16 .039
.124
8.2 Max.10
.323 .394
5.08
.200
9.4±0.5
.370±.020
15
.591
5.08
.200
9.4±0.5
.370±.020
15
.591
8.2 Max.10
.323 .394
SL type
Single side stable and
1 coil latching type
7.4
.291
0.25
.010
7.4
.291
15
.591
Suggested mounting pad (Top view) (Tolerance: ±0.1 ±.004)
2 coil latching type (L2, LT)
5.08
.200
2.54
.100
1
2.16
.085 .039
6.24
.246
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.
5.08
.200
2.54
.100
6.24
.246
TX-S
Schematic (Top view)
Single side stable
12
10 9 8
1
3 4 5
1 coil latching
12
10 9 8
1
3 4 5
Direction indication
Direction indication
(Deenergized condition)
(Reset condition)
2 coil latching (L2)
12
10 9 8 7
1
3 4 5 6
2 coil latching (LT)
12
10 9 8 7
1
3 4 5 6
Direction indication
Direction indication
(Reset condition)
(Reset condition)
NOTES
1. Packing style
1) The relay is packed in a tube with the
relay orientation mark on the left side, as
shown in the figure below.
Orientation (indicates PIN No.1) stripe
Stopper (gray)
Stopper (green)
2) Tape and reel packing (surface-mount
terminal type)
(1) Tape dimensions
(i) SA type
2. Automatic insertion
To maintain the internal function of the
relay, the chucking pressure should not
exceed the values below.
Chucking pressure in the direction A:
4.9 N {500gf} or less
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
9.8 N {1 kgf} or less
A
C
B
mm inch
1.5
Relay polarity bar .059
(Z type)
+0.1
0
+.004
0
dia.
dia. 2.0
.079
1.75
.069
4.0
.157
0.4
.016
C
A
B
D
11.5
.453
16.0 10.0 .394
.630
Relays
15.5
.610
24.0 ±0.3
±0.2
.945 ±.012 9.2±.008
.362
Please chuck the
portion.
Avoid chucking the center of the relay.
In addition, excessive chucking pressure
to the pinpoint of the relay should be
avoided.
Tape coming out direction
(ii) SL type
mm inch
1.5 +0.1
0 dia.
Relay polarity bar .059 +.004
dia. 2.0
0
(Z type)
.079
1.75
.069
4.0
.157
0.4
.016
For general cautions for use,
please refer to the “Cautions for
use of Signal Relays” or “General
Application Guidelines”.
11.5
.453
15.5
.610
16.0
.630
Relays
10.0
.394
Tape coming out direction
24.0 ±0.3
.945 ±.012
±0.2
10.8±.008
.425
(iii) SS type
mm inch
1.5
Relay polarity bar .059
(Z type)
+0.1
0
+.004
0
dia.
dia. 2.0
.079
4.0
.157
1.75
.069
0.4
.016
11.5
.453
15.5
.610
16.0
.630
Relays
Tape coming out direction
8.0 24.0 ±0.3
±.012
.315 .945 10.8±0.2
.425±.008
(2) Dimensions of plastic reel
mm inch
2.0
.079
13 dia.
.512 dia.
21 dia.
.827 dia.
380 dia.
14.961 dia.
80 dia.
3.150 dia.
All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd.