TI UA7805CKCS

µA7800 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS056J – MAY 1976 – REVISED MAY 2003
D
D
D
3-Terminal Regulators
Output Current up to 1.5 A
Internal Thermal-Overload Protection
D
D
D
High Power-Dissipation Capability
Internal Short-Circuit Current Limiting
Output Transistor Safe-Area Compensation
COMMON
KC (TO-220) PACKAGE
(TOP VIEW)
KTE PACKAGE
(TOP VIEW)
COMMON
OUTPUT
COMMON
INPUT
COMMON
KCS (TO-220) PACKAGE
(TOP VIEW)
OUTPUT
COMMON
INPUT
OUTPUT
COMMON
INPUT
description/ordering information
This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications.
These applications include on-card regulation for elimination of noise and distribution problems associated with
single-point regulation. Each of these regulators can deliver up to 1.5 A of output current. The internal
current-limiting and thermal-shutdown features of these regulators essentially make them immune to overload.
In addition to use as fixed-voltage regulators, these devices can be used with external components to obtain
adjustable output voltages and currents, and also can be used as the power-pass element in precision
regulators.
ORDERING INFORMATION
TJ
VO(NOM)
(V)
5
8
10
0°C to 125°C
12
15
24
ORDERABLE
PART NUMBER
PACKAGE†
TOP-SIDE
MARKING
POWER-FLEX (KTE)
Reel of 2000
µA7805CKTER
µA7805C
TO-220 (KC)
Tube of 50
µA7805CKC
TO-220, short shoulder (KCS)
Tube of 20
µA7805CKCS
POWER-FLEX (KTE)
Reel of 2000
µA7808CKTER
TO-220 (KC)
Tube of 50
µA7808CKC
TO-220, short shoulder (KCS)
Tube of 20
µA7808CKCS
POWER-FLEX (KTE)
Reel of 2000
µA7810CKTER
µA7810C
TO-220 (KC)
Tube of 50
µA7810CKC
µA7810C
POWER-FLEX (KTE)
Reel of 2000
µA7812CKTER
µA7812C
TO-220 (KC)
Tube of 50
µA7812CKC
TO-220, short shoulder (KCS)
Tube of 20
µA7812CKCS
POWER-FLEX (KTE)
Reel of 2000
µA7815CKTER
TO-220 (KC)
Tube of 50
µA7815CKC
TO-220, short shoulder (KCS)
Tube of 20
µA7815CKCS
POWER-FLEX (KTE)
Reel of 2000
µA7824CKTER
µA7805C
µA7808C
µA7808C
µA7812C
µA7815C
µA7815C
µA7824C
µA7824C
† Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at
www.ti.com/sc/package.
TO-220 (KC)
Tube of 50
µA7824CKC
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright  2003, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
µA7800 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS056J – MAY 1976 – REVISED MAY 2003
schematic
INPUT
OUTPUT
COMMON
absolute maximum ratings over virtual junction temperature range (unless otherwise noted)†
Input voltage, VI: µA7824C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 V
All others . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V
Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65°C to 150°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
package thermal data (see Note 1)
POWER-FLEX (KTE)
High K, JESD 51-5
θJC
3°C/W
TO-220 (KC/KCS)
High K, JESD 51-5
3°C/W
PACKAGE
BOARD
θJA
23°C/W
19°C/W
NOTE 1: Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µA7800 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS056J – MAY 1976 – REVISED MAY 2003
recommended operating conditions
VI
IO
TJ
Input voltage
MIN
MAX
µA7805C
7
25
µA7808C
10.5
25
µA7810C
12.5
28
µA7812C
14.5
30
µA7815C
17.5
30
µA7824C
27
38
1.5
A
0
125
°C
Output current
µA7800C series
Operating virtual junction temperature
UNIT
V
electrical characteristics at specified virtual junction temperature, VI = 10 V, IO = 500 mA (unless
otherwise noted)
PARAMETER
Output voltage
IO = 5 mA to 1 A,,
PD ≤ 15 W
Input voltage regulation
VI = 7 V to 25 V
VI = 8 V to 12 V
Ripple rejection
Output voltage regulation
Output resistance
Temperature coefficient of output voltage
TJ†
TEST CONDITIONS
VI = 8 V to 18 V,
IO = 5 mA to 1.5 A
IO = 5 mA
f = 10 Hz to 100 kHz
Dropout voltage
IO = 1 A
TYP
25°C
4.8
5
0°C to 125°C
4.75
VI = 7 V to 20 V,,
25°C
f = 120 Hz
IO = 250 mA to 750 mA
f = 1 kHz
Output noise voltage
0°C to 125°C
25°C
VI = 7 V to 25 V
IO = 5 mA to 1 A
62
MAX
5.2
5.25
3
100
1
50
78
UNIT
V
mV
dB
15
100
5
50
mV
0°C to 125°C
0.017
Ω
0°C to 125°C
–1.1
mV/°C
Bias current
Bias current change
µA7805C
MIN
25°C
40
µV
25°C
2
V
25°C
4.2
8
1.3
0°C to
t 125°C
0.5
Short-circuit output current
25°C
750
Peak output current
25°C
2.2
mA
mA
mA
A
† Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into
account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
3
µA7800 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS056J – MAY 1976 – REVISED MAY 2003
electrical characteristics at specified virtual junction temperature, VI = 14 V, IO = 500 mA (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
Output voltage
IO = 5 mA to 1 A,,
PD ≤ 15 W
Input voltage regulation
VI = 10.5 V to 25 V
VI = 11 V to 17 V
Ripple rejection
Output voltage regulation
Output resistance
Temperature coefficient of output voltage
VI = 11.5 V to 21.5 V,
IO = 5 mA to 1.5 A
VI = 10.5 V to 23 V,,
Output noise voltage
Dropout voltage
IO = 1 A
f = 120 Hz
TYP
MAX
25°C
7.7
8
8.3
0°C to 125°C
7.6
0°C to 125°C
55
25°C
Bias current
Bias current change
MIN
25°C
IO = 250 mA to 750 mA
f = 1 kHz
IO = 5 mA
f = 10 Hz to 100 kHz
µA7808C
TJ†
VI = 10.5 V to 25 V
IO = 5 mA to 1 A
8.4
6
160
2
80
72
UNIT
V
mV
dB
12
160
4
80
mV
0°C to 125°C
0.016
Ω
0°C to 125°C
–0.8
mV/°C
25°C
52
µV
25°C
2
V
25°C
4.3
8
1
0°C to 125°C
0.5
Short-circuit output current
25°C
450
Peak output current
25°C
2.2
mA
mA
mA
A
† Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into
account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
electrical characteristics at specified virtual junction temperature, VI = 17 V, IO = 500 mA (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
Output voltage
IO = 5 mA to 1 A,,
PD ≤ 15 W
Input voltage regulation
VI = 12.5 V to 28 V
VI = 14 V to 20 V
Ripple rejection
Output voltage regulation
Output resistance
Temperature coefficient of output voltage
VI = 13 V to 23 V,
IO = 5 mA to 1.5 A
VI = 12.5 V to 25 V,,
IO = 5 mA
f = 10 Hz to 100 kHz
Dropout voltage
IO = 1 A
f = 120 Hz
TYP
MAX
25°C
9.6
10
10.4
0°C to 125°C
9.5
10
10.5
7
200
2
100
0°C to 125°C
25°C
Bias current
Bias current change
MIN
25°C
IO = 250 mA to 750 mA
f = 1 kHz
Output noise voltage
µA7810C
TJ†
VI = 12.5 V to 28 V
IO = 5 mA to 1 A
55
71
UNIT
V
mV
dB
12
200
4
100
mV
Ω
0°C to 125°C
0.018
0°C to 125°C
–1
mV/°C
25°C
70
µV
25°C
2
V
25°C
4.3
8
1
0°C to 125°C
0.5
Short-circuit output current
25°C
400
Peak output current
25°C
2.2
mA
mA
mA
A
† Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into
account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
4
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µA7800 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS056J – MAY 1976 – REVISED MAY 2003
electrical characteristics at specified virtual junction temperature, VI = 19 V, IO = 500 mA (unless
otherwise noted)
PARAMETER
Output voltage
IO = 5 mA to 1 A,,
PD ≤ 15 W
Input voltage regulation
VI = 14.5 V to 30 V
VI = 16 V to 22 V
Ripple rejection
Output voltage regulation
Output resistance
Temperature coefficient of output voltage
VI = 15 V to 25 V,
IO = 5 mA to 1.5 A
MIN
TYP
MAX
25°C
11.5
12
12.5
0°C to 125°C
11.4
VI = 14.5 V to 27 V,,
25°C
f = 120 Hz
Output noise voltage
Dropout voltage
IO = 1 A
0°C to 125°C
VI = 14.5 V to 30 V
IO = 5 mA to 1 A
12.6
10
240
3
120
71
UNIT
V
mV
dB
12
240
4
120
mV
Ω
0°C to 125°C
0.018
0°C to 125°C
–1
mV/°C
25°C
75
µV
25°C
2
V
25°C
4.3
Bias current
Bias current change
55
25°C
IO = 250 mA to 750 mA
f = 1 kHz
IO = 5 mA
f = 10 Hz to 100 kHz
µA7812C
TJ†
TEST CONDITIONS
8
1
0°C to
t 125°C
0.5
Short-circuit output current
25°C
350
Peak output current
25°C
2.2
mA
mA
mA
A
† Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into
account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
electrical characteristics at specified virtual junction temperature, VI = 23 V, IO = 500 mA (unless
otherwise noted)
PARAMETER
Output voltage
IO = 5 mA to 1 A,,
PD ≤ 15 W
Input voltage regulation
VI = 17.5 V to 30 V
VI = 20 V to 26 V
Ripple rejection
Output voltage regulation
Output resistance
Temperature coefficient of output voltage
TJ†
TEST CONDITIONS
VI = 18.5 V to 28.5 V,
IO = 5 mA to 1.5 A
IO = 5 mA
f = 10 Hz to 100 kHz
Dropout voltage
IO = 1 A
TYP
25°C
14.4
15
0°C to 125°C
14.25
VI = 17.5 V to 30 V,,
25°C
f = 120 Hz
IO = 250 mA to 750 mA
f = 1 kHz
Output noise voltage
0°C to 125°C
25°C
VI = 17.5 V to 30 V
IO = 5 mA to 1 A
54
MAX
15.6
15.75
11
300
3
150
70
UNIT
V
mV
dB
12
300
4
150
mV
Ω
0°C to 125°C
0.019
0°C to 125°C
–1
mV/°C
25°C
90
µV
25°C
2
V
25°C
4.4
Bias current
Bias current change
µA7815C
MIN
8
1
0°C to 125°C
0.5
Short-circuit output current
25°C
230
Peak output current
25°C
2.1
mA
mA
mA
A
† Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into
account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
µA7800 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS056J – MAY 1976 – REVISED MAY 2003
electrical characteristics at specified virtual junction temperature, VI = 33 V, IO = 500 mA (unless
otherwise noted)
PARAMETER
TEST CONDITIONS
Output voltage
IO = 5 mA to 1 A,,
PD ≤ 15 W
Input voltage regulation
VI = 27 V to 38 V
VI = 30 V to 36 V
Ripple rejection
Output voltage regulation
Output resistance
Temperature coefficient of output voltage
VI = 28 V to 38 V,
IO = 5 mA to 1.5 A
VI = 27 V to 38 V,,
Output noise voltage
Dropout voltage
IO = 1 A
µA7824C
MIN
TYP
23
24
22.8
25°C
f = 120 Hz
0°C to 125°C
25°C
Bias current
Bias current change
25°C
0°C to 125°C
IO = 250 mA to 750 mA
f = 1 kHz
IO = 5 mA
f = 10 Hz to 100 kHz
TJ†
VI = 27 V to 38 V
IO = 5 mA to 1 A
50
MAX
25
25.2
18
480
6
240
66
UNIT
V
mV
dB
12
480
4
240
mV
0°C to 125°C
0.028
Ω
0°C to 125°C
–1.5
mV/°C
25°C
170
µV
25°C
2
V
25°C
4.6
8
1
0°C to 125°C
0.5
Short-circuit output current
25°C
150
Peak output current
25°C
2.1
mA
mA
mA
A
† Pulse-testing techniques maintain the junction temperature as close to the ambient temperature as possible. Thermal effects must be taken into
account separately. All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output.
6
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
µA7800 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS056J – MAY 1976 – REVISED MAY 2003
APPLICATION INFORMATION
µA78xx
+V
+VO
0.33 µF
0.1 µF
Figure 1. Fixed-Output Regulator
IN
+
OUT
µA78xx
VI
G
IL
COM
–VO
–
Figure 2. Positive Regulator in Negative Configuration (VI Must Float)
Input
µA78xx
Output
R1
IO
0.33 µF
0.1 µF
R2
ǒ )Ǔ
NOTE A: The following formula is used when Vxx is the nominal output voltage (output to common) of the fixed regulator:
VO
+V )
xx
V xx
R1
I Q R2
Figure 3. Adjustable-Output Regulator
µA78xx
Input
0.33 µF
R1
VO(Reg)
Output
IO
IO = (VO/R1) + IO Bias Current
Figure 4. Current Regulator
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
7
µA7800 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS056J – MAY 1976 – REVISED MAY 2003
APPLICATION INFORMATION
1N4001
µA7815C
20-V Input
VO = 15 V
0.33 µF
0.1 µF
0.1 µF
1 µF
2 µF
1N4001
1N4001
µA7915C
–20-V Input
VO = –15 V
1N4001
Figure 5. Regulated Dual Supply
operation with a load common to a voltage of opposite polarity
In many cases, a regulator powers a load that is not connected to ground but, instead, is connected to a voltage
source of opposite polarity (e.g., operational amplifiers, level-shifting circuits, etc.). In these cases, a clamp
diode should be connected to the regulator output as shown in Figure 6. This protects the regulator from output
polarity reversals during startup and short-circuit operation.
µA78xx
+VI
+VO
1N4001
or
Equivalent
–VO
Figure 6. Output Polarity-Reversal-Protection Circuit
reverse-bias protection
Occasionally, the input voltage to the regulator can collapse faster than the output voltage. This can occur, for
example, when the input supply is crowbarred during an output overvoltage condition. If the output voltage is
greater than approximately 7 V, the emitter-base junction of the series-pass element (internal or external) could
break down and be damaged. To prevent this, a diode shunt can be used as shown in Figure 7.
VI
µA78xx
+VO
Figure 7. Reverse-Bias-Protection Circuit
8
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
PACKAGE OPTION ADDENDUM
www.ti.com
1-Mar-2005
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
UA7805CKC
ACTIVE
TO-220
KC
3
50
None
Call TI
Level-1-220C-UNLIM
UA7805CKCS
ACTIVE
TO-220
KCS
3
50
None
Call TI
Level-NC-NC-NC
2000
Package
Drawing
Pins Package Eco Plan (2)
Qty
Lead/Ball Finish
MSL Peak Temp (3)
UA7805CKTER
ACTIVE
PFM
KTE
3
None
Call TI
Level-1-220C-UNLIM
UA7805QKC
OBSOLETE
TO-220
KC
3
None
Call TI
Call TI
UA7805QKTE
OBSOLETE
PFM
KTE
3
None
Call TI
Call TI
UA7806CKC
OBSOLETE
TO-220
KC
3
None
Call TI
Call TI
UA7806CKTER
OBSOLETE
PFM
KTE
3
None
Call TI
Call TI
UA7806QKTE
OBSOLETE
PFM
KTE
3
None
Call TI
Call TI
UA7806QKTER
OBSOLETE
PFM
KTE
3
None
Call TI
Call TI
UA7808CKC
ACTIVE
TO-220
KC
3
50
None
Call TI
Level-1-220C-UNLIM
UA7808CKCS
ACTIVE
TO-220
KCS
3
50
None
Call TI
Level-NC-NC-NC
UA7808CKTER
ACTIVE
PFM
KTE
3
2000
None
Call TI
Level-1-220C-UNLIM
UA7808QKTE
OBSOLETE
PFM
KTE
3
None
Call TI
Call TI
UA7810CKC
ACTIVE
TO-220
KC
3
50
None
Call TI
Level-1-220C-UNLIM
UA7810CKCS
ACTIVE
TO-220
KCS
3
50
None
CU
UA7810CKTER
ACTIVE
PFM
KTE
3
2000
None
Call TI
Level-NC-NC-NC
Level-1-220C-UNLIM
UA7810QKTE
OBSOLETE
PFM
KTE
3
None
Call TI
Call TI
UA7812CKC
ACTIVE
TO-220
KC
3
50
None
Call TI
Level-1-220C-UNLIM
UA7812CKCS
ACTIVE
TO-220
KCS
3
50
None
Call TI
Level-NC-NC-NC
UA7812CKTER
ACTIVE
PFM
KTE
3
2000
None
Call TI
Level-1-220C-UNLIM
UA7812QKTE
OBSOLETE
PFM
KTE
3
None
Call TI
Call TI
UA7815CKC
ACTIVE
TO-220
KC
3
50
None
Call TI
Level-1-220C-UNLIM
UA7815CKCS
ACTIVE
TO-220
KCS
3
50
None
Call TI
Level-NC-NC-NC
UA7815CKTER
ACTIVE
PFM
KTE
3
2000
None
Call TI
Level-1-220C-UNLIM
UA7815QKTE
OBSOLETE
PFM
KTE
3
None
Call TI
Call TI
UA7818CKC
OBSOLETE
TO-220
KC
3
None
Call TI
Call TI
UA7818CKTER
OBSOLETE
PFM
KTE
3
None
Call TI
Call TI
Level-1-220C-UNLIM
UA7824CKC
ACTIVE
TO-220
KC
3
50
None
Call TI
UA7824CKCS
ACTIVE
TO-220
KCS
3
50
None
CU
UA7824CKTER
ACTIVE
PFM
KTE
3
2000
None
Call TI
Level-1-220C-UNLIM
Level-NC-NC-NC
UA7885CKC
OBSOLETE
TO-220
KC
3
None
Call TI
Call TI
UA7885CKTER
OBSOLETE
PFM
KTE
3
None
Call TI
Call TI
UA7885QKTE
OBSOLETE
PFM
KTE
3
None
Call TI
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional
product content details.
None: Not yet available Lead (Pb-Free).
Addendum-Page 1
PACKAGE OPTION ADDENDUM
www.ti.com
1-Mar-2005
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens,
including bromine (Br) or antimony (Sb) above 0.1% of total product weight.
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 2
MECHANICAL DATA
MPFM001E – OCTOBER 1994 – REVISED JANUARY 2001
KTE (R-PSFM-G3)
PowerFLEX PLASTIC FLANGE-MOUNT
0.375 (9,52)
0.080 (2,03)
0.070 (1,78)
0.365 (9,27)
0.360 (9,14)
0.050 (1,27)
0.040 (1,02)
0.350 (8,89)
0.220 (5,59)
NOM
0.010 (0,25) NOM
Thermal Tab
(See Note C)
0.360 (9,14)
0.350 (8,89)
0.295 (7,49)
NOM
0.320 (8,13)
0.310 (7,87)
0.420 (10,67)
0.410 (10,41)
1
3
0.025 (0,63)
0.031 (0,79)
0.100 (2,54)
Seating Plane
0.004 (0,10)
0.010 (0,25) M
0.005 (0,13)
0.001 (0,03)
0.200 (5,08)
0.041 (1,04)
0.031 (0,79)
0.010 (0,25)
NOM
Gage Plane
3°– 6°
0.010 (0,25)
4073375/F 12/00
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
The center lead is in electrical contact with the thermal tab.
Dimensions do not include mold protrusions, not to exceed 0.006 (0,15).
Falls within JEDEC MO-169
PowerFLEX is a trademark of Texas Instruments.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,
enhancements, improvements, and other changes to its products and services at any time and to discontinue
any product or service without notice. Customers should obtain the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to TI’s terms
and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in
accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI
deems necessary to support this warranty. Except where mandated by government requirements, testing of all
parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for
their products and applications using TI components. To minimize the risks associated with customer products
and applications, customers should provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,
copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process
in which TI products or services are used. Information published by TI regarding third-party products or services
does not constitute a license from TI to use such products or services or a warranty or endorsement thereof.
Use of such information may require a license from a third party under the patents or other intellectual property
of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without
alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction
of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for
such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that
product or service voids all express and any implied warranties for the associated TI product or service and
is an unfair and deceptive business practice. TI is not responsible or liable for any such statements.
Following are URLs where you can obtain information on other Texas Instruments products and application
solutions:
Products
Applications
Amplifiers
amplifier.ti.com
Audio
www.ti.com/audio
Data Converters
dataconverter.ti.com
Automotive
www.ti.com/automotive
DSP
dsp.ti.com
Broadband
www.ti.com/broadband
Interface
interface.ti.com
Digital Control
www.ti.com/digitalcontrol
Logic
logic.ti.com
Military
www.ti.com/military
Power Mgmt
power.ti.com
Optical Networking
www.ti.com/opticalnetwork
Microcontrollers
microcontroller.ti.com
Security
www.ti.com/security
Telephony
www.ti.com/telephony
Video & Imaging
www.ti.com/video
Wireless
www.ti.com/wireless
Mailing Address:
Texas Instruments
Post Office Box 655303 Dallas, Texas 75265
Copyright  2005, Texas Instruments Incorporated