TI UA78M10QKTPRQ1

uA78Mxx-Q1 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS537B − JUNE 2004 − REVISED SEPTEMBER 2008
D
D
D
D
Qualified for Automotive Applications
3-Terminal Regulators
Output Current Up To 500 mA
No External Components
D
D
D
D
Internal Thermal-Overload Protection
High Power-Dissipation Capability
Internal Short-Circuit Current Limiting
Output Transistor Safe-Area Compensation
DCY (SOT-223) PACKAGE
(TOP VIEW)
COMMON
KTP PACKAGE
(TOP VIEW)
OUTPUT
COMMON
OUTPUT
COMMON
INPUT
COMMON
INPUT
description/ordering information
This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications.
These applications include on-card regulation for elimination of noise and distribution problems associated with
single-point regulation. Each of these regulators can deliver up to 500 mA of output current. The internal
current-limiting and thermal-shutdown features of these regulators essentially make them immune to overload.
In addition to use as fixed-voltage regulators, these devices can be used with external components to obtain
adjustable output voltages and currents and also as the power-pass element in precision regulators.
ORDERING INFORMATION{
TJ
VO(NOM)
(V)
33
3.3
−40°C
40 C to 125
125°C
C
5
8
10
ORDERABLE
PART NUMBER
PACKAGE‡
TOP-SIDE
MARKING
PowerFLEX (KTP)
Reel of 3000
UA78M33QKTPRQ1
78M33CQ
SOT-223 (DCY)
Reel of 2500
UA78M33QDCYRQ1
C3Q
PowerFLEX (KTP)
Reel of 3000
UA78M05QKTPRQ1
78M05CQ
SOT-223 (DCY)
Reel of 2500
UA78M05QDCYRQ1
C5Q
PowerFLEX (KTP)
Reel of 3000
UA78M08QKTPRQ1
78M08CQ
SOT-223 (DCY)
Reel of 2500
UA78M08QDCYRQ1
C8Q
PowerFLEX (KTP)
Reel of 3000
UA78M10QKTPRQ1
78M10CQ
†
For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see
the TI web site at www.ti.com.
‡ Package drawings, thermal data, and symbolization are available at www.ti.com/packaging.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerFLEX is a trademark of Texas Instruments.
Copyright  2008, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
uA78Mxx-Q1 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS537B − JUNE 2004 − REVISED SEPTEMBER 2008
schematic
INPUT
140 kΩ
96 Ω
0.6 Ω
OUTPUT
0 to 20 kΩ
5.4 kΩ
COMMON
Resistor values shown are nominal.
2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
uA78Mxx-Q1 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS537B − JUNE 2004 − REVISED SEPTEMBER 2008
absolute maximum ratings over virtual junction temperature range (unless otherwise noted)†
Input voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V
Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65°C to 150°C
†
Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
package thermal data (see Note 1)
PACKAGE
BOARD
θJC
θJA
PowerFLEX (KTP)
High K, JESD 51-5
19°C/W
28°C/W
SOT-223 (DCY)
High K, JESD 51-7
4°C/W
53°C/W
NOTE 1: Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (TJ(max) − TA)/θJA. Operating at the absolute maximum TJ of 150°C can affect reliability.
recommended operating conditions
VI
Input voltage
IO
Output current
TJ
Operating virtual junction temperature
POST OFFICE BOX 655303
MIN
MAX
µA78M33
5.3
25
µA78M05
7
25
µA78M06
8
25
µA78M08
10.5
25
µA78M09
11.5
26
µA78M10
12.5
28
µA78M12
14.5
−40
• DALLAS, TEXAS 75265
UNIT
V
30
500
mA
125
°C
3
uA78Mxx-Q1 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS537B − JUNE 2004 − REVISED SEPTEMBER 2008
electrical characteristics at specified virtual junction temperature, VI = 8 V, IO = 350 mA, TJ = 25°C
(unless otherwise noted)
TEST CONDITIONS†
PARAMETER
µA78M33Q
MIN
TYP
MAX
3.2
3.3
3.4
3.1
3.3
3.5
VI = 5.3 V to 25 V
9
100
VI = 8 V to 25 V
3
50
‡
O t t voltage
Output
lt
IO = 5 mA to 350 mA,
VI = 8 V to 20 V
Input voltage regulation
IO = 200 mA
VI = 8 V to 18 V,
f = 120 Hz
IO = 100 mA, TJ = −40°C to 125°C
62
Ripple rejection
IO = 300 mA
62
Output voltage regulation
VI = 8 V,
IO = 5 mA to 500 mA
20
Temperature coefficient of output voltage
IO = 5 mA,
TJ = −40°C to 125°C
−1
Output noise voltage
f = 10 Hz to 100 kHz
TJ = −40°C to 125°C
Dropout voltage
4.5
Bias current change
Short-circuit output current
100
µV
6
mA
V
VI = 8 V to 25 V,
0.8
IO = 5 mA to 350 mA,
TJ = −40°C to 125°C
0.5
VI = 35 V
mV
200
IO = 200 mA,
TJ = −40°C to 125°C
Peak output current
mV
mV/°C
2
Bias current
V
dB
80
40
UNIT
mA
300
mA
700
mA
†
All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques
maintain TJ as close to TA as possible. Thermal effects must be taken into account separately.
‡ This specification applies only for dc power dissipation permitted by absolute maximum ratings.
electrical characteristics at specified virtual junction temperature, VI = 10 V, IO = 350 mA, TJ = 25°C
(unless otherwise noted)
TEST CONDITIONS†
PARAMETER
O tp t voltage
oltage
Output
IO = 5 mA to 350 mA,
VI = 7 V to 20 V
Input voltage regulation
IO = 200 mA
Ripple rejection
VI = 8 V to 18 V,
f = 120 Hz
Output voltage regulation
TJ = −40°C to 125°C
5
5.2
4.75
5.25
3
100
VI = 8 V to 25 V
1
50
IO = 100 mA, TJ = −40°C to 125°C
62
IO = 300 mA
62
100
10
50
Output noise voltage
f = 10 Hz to 100 kHz
TJ = −40°C to 125°C
−1
40
mV
µV
6
mA
V
VI = 8 V to 25 V,
0.8
IO = 5 mA to 350 mA,
TJ = −40°C to 125°C
0.5
Peak output current
mV
200
IO = 200 mA,
TJ = −40°C to 125°C
VI = 35 V
V
mV/°C
2
4.5
UNIT
dB
80
20
Bias current
4
4.8
VI = 7 V to 25 V
Dropout voltage
†
MAX
IO = 5 mA to 200 mA
IO = 5 mA,
Short-circuit output current
TYP
IO = 5 mA to 500 mA
Temperature coefficient of output voltage
Bias current change
µA78M05Q
MIN
mA
300
mA
0.7
A
All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques
maintain TJ as close to TA as possible. Thermal effects must be taken into account separately.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
uA78Mxx-Q1 SERIES
POSITIVE-VOLTAGE REGULATORS
SLVS537B − JUNE 2004 − REVISED SEPTEMBER 2008
electrical characteristics at specified virtual junction temperature, VI = 14 V, IO = 350 mA, TJ = 25°C
(unless otherwise noted)
O t t voltage
Output
lt
VI = 10.5
10 5 V to 23 V,
V
Input voltage regulation
IO = 200 mA
Ripple rejection
VI = 11.5 V to 21.5 V,
f = 120 Hz
Output voltage regulation
µA78M08Q
TEST CONDITIONS†
PARAMETER
IO = 5 mA to 350 mA
TJ = −40°C to 125°C
MIN
TYP
MAX
7.7
8
8.3
7.6
VI = 10.5 V to 25 V
6
100
VI = 11 V to 25 V
2
50
IO = 100 mA,
TJ = −40°C to 125°C
IO = 300 mA
56
25
160
10
80
Output noise voltage
f = 10 Hz to 100 kHz
TJ = −40°C to 125°C
Dropout voltage
Short-circuit output current
IO = 200 mA,
TJ = −40°C to 125°C
52
µV
TJ = −40°C to 125°C
V
6
mA
0.8
0.5
VI = 35 V
Peak output current
†
mV/°C
4.6
IO = 5 mA to 350 mA,
mV
−1
2
Bias current
VI = 10.5 V to 25 V,
mV
dB
80
IO = 5 mA to 200 mA
IO = 5 mA,
V
56
IO = 5 mA to 500 mA
Temperature coefficient
of output voltage
Bias current change
8.4
UNIT
mA
250
mA
0.7
A
All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques
maintain TJ as close to TA as possible. Thermal effects must be taken into account separately.
electrical characteristics at specified virtual junction temperature, VI = 17 V, IO = 350 mA, TJ = 25°C
(unless otherwise noted)
O t t voltage
Output
lt
VI = 12.5
12 5 V to 25 V,
V
Input voltage regulation
IO = 200 mA
Ripple rejection
VI = 15 V to 25 V,
f = 120 Hz
Output voltage regulation
µA78M10Q
TEST CONDITIONS†
PARAMETER
IO = 5 mA to 350 mA
TJ = −40°C to 125°C
9.6
10
10.4
9.5
10.5
VI = 12.5 V to 28 V
7
100
VI = 14 V to 28 V
2
50
IO = 100 mA,
TJ = −40°C to 125°C
IO = 300 mA
IO = 5 mA to 200 mA
10
100
Output noise voltage
f = 10 Hz to 100 kHz
IO = 200 mA,
IO = 5 mA to 350 mA,
TJ = −40°C to 125°C
64
µV
TJ = −40°C to 125°C
VI = 35 V
Peak output current
mV
mV/°C
4.7
VI = 12.5 V to 28 V,
mV
−1
2
Bias current
V
dB
80
200
TJ = −40°C to 125°C
UNIT
59
55
Dropout voltage
†
MAX
25
IO = 5 mA,
Short-circuit output current
TYP
IO = 5 mA to 500 mA
Temperature coefficient
of output voltage
Bias current change
MIN
V
6
mA
0.8
0.5
mA
245
mA
0.7
A
All characteristics are measured with a 0.33-µF capacitor across the input and a 0.1-µF capacitor across the output. Pulse-testing techniques
maintain TJ as close to TA as possible. Thermal effects must be taken into account separately.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
PACKAGING INFORMATION
Orderable Device
Status
(1)
UA78M05QDCYRG4Q1
ACTIVE
Package Type Package Pins Package
Drawing
Qty
SOT-223
DCY
4
UA78M05QKTPRQ1
OBSOLETE
PFM
KTP
2
UA78M33QDCYRG4Q1
ACTIVE
SOT-223
DCY
4
UA78M33QKTPRQ1
OBSOLETE
PFM
KTP
2
Eco Plan
Lead/Ball Finish
(2)
MSL Peak Temp
Op Temp (°C)
Top-Side Markings
(3)
2500
Green (RoHS
& no Sb/Br)
CU NIPDAU
TBD
2500
Green (RoHS
& no Sb/Br)
TBD
Call TI
(4)
Level-2-260C-1 YEAR
-40 to 125
Call TI
Call TI
-40 to 125
CU NIPDAU
Level-2-260C-1 YEAR
-40 to 125
Call TI
-40 to 125
C5Q
C3Q
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
(4)
Multiple Top-Side Markings will be inside parentheses. Only one Top-Side Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a
continuation of the previous line and the two combined represent the entire Top-Side Marking for that device.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
Addendum-Page 1
Samples
PACKAGE OPTION ADDENDUM
www.ti.com
11-Apr-2013
OTHER QUALIFIED VERSIONS OF UA78M05-Q1, UA78M33-Q1 :
• Catalog: UA78M05, UA78M33
NOTE: Qualified Version Definitions:
• Catalog - TI's standard catalog product
Addendum-Page 2
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Mar-2013
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
A0
Diameter Width (mm)
(mm) W1 (mm)
B0
(mm)
K0
(mm)
P1
(mm)
W
Pin1
(mm) Quadrant
UA78M05QDCYRG4Q1 SOT-223
DCY
4
2500
330.0
12.4
6.8
7.3
1.88
8.0
12.0
Q3
UA78M33QDCYRG4Q1 SOT-223
DCY
4
2500
330.0
12.4
6.83
7.42
1.88
8.0
12.0
Q3
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
14-Mar-2013
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
UA78M05QDCYRG4Q1
SOT-223
DCY
4
2500
358.0
335.0
35.0
UA78M33QDCYRG4Q1
SOT-223
DCY
4
2500
358.0
335.0
35.0
Pack Materials-Page 2
MECHANICAL DATA
MPDS094A – APRIL 2001 – REVISED JUNE 2002
DCY (R-PDSO-G4)
PLASTIC SMALL-OUTLINE
6,70 (0.264)
6,30 (0.248)
3,10 (0.122)
2,90 (0.114)
4
0,10 (0.004) M
3,70 (0.146)
3,30 (0.130)
7,30 (0.287)
6,70 (0.264)
Gauge Plane
1
2
0,84 (0.033)
0,66 (0.026)
2,30 (0.091)
4,60 (0.181)
1,80 (0.071) MAX
3
0°–10°
0,10 (0.004) M
0,25 (0.010)
0,75 (0.030) MIN
1,70 (0.067)
1,50 (0.059)
0,35 (0.014)
0,23 (0.009)
Seating Plane
0,08 (0.003)
0,10 (0.0040)
0,02 (0.0008)
4202506/B 06/2002
NOTES: A.
B.
C.
D.
All linear dimensions are in millimeters (inches).
This drawing is subject to change without notice.
Body dimensions do not include mold flash or protrusion.
Falls within JEDEC TO-261 Variation AA.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
MECHANICAL DATA
MPSF001F – JANUARY 1996 – REVISED JANUARY 2002
KTP (R-PSFM-G2)
PowerFLEX PLASTIC FLANGE-MOUNT PACKAGE
0.080 (2,03)
0.070 (1,78)
0.243 (6,17)
0.233 (5,91)
0.228 (5,79)
0.218 (5,54)
0.050 (1,27)
0.040 (1,02)
0.010 (0,25) NOM
0.130 (3,30) NOM
0.215 (5,46)
NOM
0.247 (6,27)
0.237 (6,02)
Thermal Tab
(See Note C)
0.287 (7,29)
0.277 (7,03)
0.381 (9,68)
0.371 (9,42)
0.100 (2,54)
0.090 (2,29)
0.032 (0,81) MAX
Seating Plane
0.090 (2,29)
0.180 (4,57)
0.004 (0,10)
0.005 (0,13)
0.001 (0,02)
0.031 (0,79)
0.025 (0,63)
0.010 (0,25) M
0.010 (0,25) NOM
Gage Plane
0.047 (1,19)
0.037 (0,94)
0.010 (0,25)
2°–ā6°
4073388/M 01/02
NOTES: A.
B.
C.
D.
E.
All linear dimensions are in inches (millimeters).
This drawing is subject to change without notice.
The center lead is in electrical contact with the thermal tab.
Dimensions do not include mold protrusions, not to exceed 0.006 (0,15).
Falls within JEDEC TO-252 variation AC.
PowerFLEX is a trademark of Texas Instruments.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
1
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of
non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.
Products
Applications
Audio
www.ti.com/audio
Automotive and Transportation
www.ti.com/automotive
Amplifiers
amplifier.ti.com
Communications and Telecom
www.ti.com/communications
Data Converters
dataconverter.ti.com
Computers and Peripherals
www.ti.com/computers
DLP® Products
www.dlp.com
Consumer Electronics
www.ti.com/consumer-apps
DSP
dsp.ti.com
Energy and Lighting
www.ti.com/energy
Clocks and Timers
www.ti.com/clocks
Industrial
www.ti.com/industrial
Interface
interface.ti.com
Medical
www.ti.com/medical
Logic
logic.ti.com
Security
www.ti.com/security
Power Mgmt
power.ti.com
Space, Avionics and Defense
www.ti.com/space-avionics-defense
Microcontrollers
microcontroller.ti.com
Video and Imaging
www.ti.com/video
RFID
www.ti-rfid.com
OMAP Applications Processors
www.ti.com/omap
TI E2E Community
e2e.ti.com
Wireless Connectivity
www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2013, Texas Instruments Incorporated