UG1001 - UG1005 1.0A ULTRA-FAST GLASS PASSIVATED RECTIFIER Features · · · · · · · Glass Passivated Die Construction Diffused Junction Ultra-Fast Switching for High Efficiency High Current Capability and Low Forward Voltage Drop B A A Surge Overload Rating to 30A Peak Low Reverse Leakage Current Lead Free Finish, RoHS Compliant (Note 4) C Mechanical Data · · · · · · · · · D Case: DO-41 Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 DO-41 Moisture Sensitivity: Level 1 per J-STD-020C Dim Min A 25.40 ¾ B 4.06 5.21 C 0.71 0.864 D 2.00 2.72 Terminals: Finish - Bright Tin. Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Cathode Band Marking: Type Number Ordering Information: See Last Page Max All Dimensions in mm Mounting Position: Any Weight: 0.35 grams (approximate) Maximum Ratings and Electrical Characteristics @ TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 1) @ TA = 55°C Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on Rated Load (JEDEC Method) Forward Voltage Peak Reverse Current at Rated DC Blocking Voltage @ IF = 1.0A @ TA = 25°C @ TA = 100°C Symbol UG1001 UG1002 UG1003 UG1004 UG1005 Unit VRRM VRWM VR 50 100 200 400 600 V VR(RMS) 35 70 140 280 420 V IO 1.0 A IFSM 30 A VFM 1.0 1.3 1.7 5.0 100 IRM V mA Reverse Recovery Time (Note 3) trr 50 75 ns Typical Junction Capacitance (Note 2) Cj 20 10 pF Typical Thermal Resistance Junction to Ambient Operating and Storage Temperature Range Notes: 1. 2. 3. 4. RqJA 95 K/W Tj, TSTG -65 to +150 °C Valid provided that leads are maintained at ambient temperature at a distance of 9.5mm from the case. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. Measured with IF = 0.5A, IR = 1.0A, Irr = 0.25A. See figure 5. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. DS27008 Rev. 3 - 2 1 of 3 www.diodes.com UG1001 - UG1005 ã Diodes Incorporated IF, INSTANTANEOUS FWD CURRENT (A) I(AV), AVERAGE FWD RECTIFIED CURRENT (A) 10 1.0 0.8 0.6 0.4 0.2 Single phase half-wave 60 Hz resistive or inductive load 0 25 50 75 100 UG1001 - UG1003 UG1004 1.0 0.1 UG1005 0.01 125 150 175 200 0.6 TA, AMBIENT TEMPERATURE (° C) Fig. 1 Forward Current Derating Curve 1.0 1.2 1.4 1.6 1.8 2.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics 30 100 Cj, CAPACITANCE (pF) IFSM, PEAK FORWARD SURGE CURRENT (A) 0.8 20 10 Pulse width = 8.3ms single half sine-wave (JEDEC Method) 10 UG1005 Tj = 25° C f = 1.0MHz 1 0 1 UG1001 UG1004 10 NUMBER OF CYCLES AT 60Hz Fig. 3 Peak Forward Surge Current 1 100 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance trr +0.5A Device Under Test (-) 0A (+) Pulse Generator (Note 2) 50V DC Approx (-) Oscilloscope (Note 1) -0.25A (+) -1.0A Set time base for 50/100 ns/cm Fig. 5 Reverse Recovery Time Characteristic and Test Circuit DS27008 Rev. 3 - 2 2 of 3 www.diodes.com UG1001 - UG1005 Ordering Information Notes: 5. (Note 5) Device Packaging Shipping UG1001-A DO-41 5K/Ammo Pack UG1001-B DO-41 1K/Bulk UG1001-T DO-41 5K/Tape & Reel, 13-inch UG1002-A DO-41 5K/Ammo Pack UG1002-B DO-41 1K/Bulk UG1002-T DO-41 5K/Tape & Reel, 13-inch UG1003-A DO-41 5K/Ammo Pack UG1003-B DO-41 1K/Bulk UG1003-T DO-41 5K/Tape & Reel, 13-inch UG1004-A DO-41 5K/Ammo Pack UG1004-B DO-41 1K/Bulk UG1004-T DO-41 5K/Tape & Reel, 13-inch UG1005-A DO-41 5K/Ammo Pack UG1005-B DO-41 1K/Bulk UG1005-T DO-41 5K/Tape & Reel, 13-inch For packaging details, visit our website at http://www.diodes.com/datasheets/ap02008.pdf DS27008 Rev. 3 - 2 3 of 3 www.diodes.com UG1001 - UG1005