U N I PA C O P T O E L E C T R O N I C S C O R P O R AT I O N
Spec. No. 233-220-076
Version :
0
Total pages :
19
Date
: 1999.07.27
TENTATIVE
UP068D01 COLOR TFT-LCD
MODULE SPECIFICATION
MODEL NAME: UP068D01
The content of this technical information
is subject to change without notice.
Please contact Unipac or its agent for
further information.
Unipac copyright 1999
All rights reserved,
Copying forbidden.
SPEC NO. : 233-220-076
PAGE
1/19
:
Contents :
P3
A. Physical specification
B. Electrical specifications
1. Pin assignment
a. TFT-LCD panel driving section
b. Backlight driving section
2. Absolute maximum ratings
3. Electrical characteristics
a. Timing conditions
b. Timing diagram
E. Packing from
P7
P7
P7
P6
P6
P6
P6
P5
P5
P4
P4
P4
C. Optical specifications
D. Reliability test items
c. Backlight driving conditions
4. AC Timing
a. Typical operating conditions
b. Current consumption
P10
P8
P11
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
PAGE
2/19
:
Appendix:
Fig.1 Outline dimension of TFT-LCD module
Fig.2 Sampling clock timing
Fig.3 Horizontal display timing range
Fig.4-(a) Horizontal timing
Fig.4-(b) Detail horizontal timing
Fig.5 Vertical shift clock timing
Fig.6-(a) Vertical timing (From up to down)
Fig.6-(b) Vertical timing (From down to up)
P18
P16
P17
P15
P14
P13
P12
P19
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
PAGE
:
3/19
A. Physical specifications
NO.
Item
Specification
1
Display resolution(dot)
1152(W)
2
Active area(mm)
138.24(W)
3
Screen size(inch)
6.8(Diagonal)
4
Dot pitch(mm)
0.120(W)
5
Color configuration
R. G. B. STRIPE
6
Overall dimension(mm)
157.2(W)
7
Weight(g)
280
Remark
234(H)
103.43(H)
0.442(H)
122.6(H)
8.0(D)
Note 1
20
Note 1: Refer to Fig. 1
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
PAGE
:
4/19
B. Electrical specifications
1.Pin assignment
a. TFT-LCD panel driving section
Pin no
Symbol
I/O
Description
Remark
1
GND
-
Ground for logic circuit
2
VCC
I
Supply voltage for logic control circuit
3
VGL
I
Negative power for scan driver
4
VGH
I
Positive power for scan driver
5
STVR
I/o Vertical start pulse
Note 1
6
STVL
I/o Vertical start pulse
Note 1
7
CKV
I
Shift clock input for scan driver
8
U/D
I
UP/DOWN scan control input
9
OEV
I
Output enable input for scan driver
10
VCOM
I
Common electrode driving signal
11
VCOM
I
Common electrode driving signal
12
L/R
I
LEFT/RIGHT scan control input
13
Q1H
I
Analog signal rotate input
14
OEH
I
Output enable input for data driver
15
STHL
I/o Start pulse for horizontal scan line
Note 1
16
STHR
I/o Start pulse for horizontal scan line
Note 1
17
CPH3
I
Sampling and shifting clock pulse for data driver
18
CPH2
I
Sampling and shifting clock pulse for data driver
19
CPH1
I
Sampling and shifting clock pulse for data driver
20
VCC
I
Supply voltage of logic control circuit for data driver
21
GND
-
Ground for logic circuit
22
VR
I
Alternated video signal input(Red)
23
VG
I
Alternated video signal input(Green)
24
VB
I
Alternated video signal input(Blue)
25
AVDD
I
Supply voltage for analog circuit
26
AVSS
-
Ground for analog circuit
Note 1,2
Note 1,2
Note 1: Selection of scanning mode (please refer to the following table)
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
PAGE
Setting of scan
IN/OUT state
control input
For start pulse
:
5/19
Scanning direction
U/D
L/R
STVR
STVL
STHR
STHL
GND
VCC
OUT
IN
OUT
IN
VCC
GND
IN
OUT
IN
OUT
GND
GND
OUT
IN
IN
OUT
VCC
VCC
IN
OUT
OUT
IN
From up to down,
from left to right.
From down to up,
from right to left.
From up to down,
from right to left.
From down to up,
from left to right.
and
and
and
and
IN: Input; OUT: Output.
Note 2 : Definition of scanning direction.
Refer to figure as below:
UP
DOWN
FPC
LEFT
26
RIGHT
1
b. Backlight driving section
No.
Symbol
I/O
Description
Remark
1
HI
i
Power supply for backlight unit (Hight voltage)
2
GND
-
Ground for backlight unit
2. Absolute maximum ratings
Item
Symbol
VCC
Condition
GND=0
Min.
-0.3
Max.
7
Unit
V
AVDD
AVSS=0
-0.3
7
V
-0.3
21
V
-15
0.3
V
-
31
V
Vi
-0.3
AVDD+0.3
V
Note 1
VI
-0.3
VCC+0.3
V
Note 2
VCOM
-2.9
5.2
V
Operating
temperature
Topa
-0
60
Storage
temperature
Tstg
-25
80
Power voltage
VGH
VGL
VGH
Input signal
voltage
VGL
GND=0
Remark
Ambient temperature
Ambient temperature
Note 1: VR, VG, VB
Note 2: STHL, STHR, OEH,L/R,CPH1~CPH3, STVR, STVL,OEV,CLK,U/D.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
PAGE
6/19
:
3. Electrical characteristics
a. Typical operating conditions (GND=AVss=0V , Note 5)
Item
Symbol
Min.
Typ.
Max.
Unit
VCC
4.8
5
5.2
V
AVDD
4.8
5
5.2
V
VGH
14.3
15
15.7
V
VGLAC
3.5
5
7.5
Vp-p
VGLDC
-10.5
-10
-9.5
V
Video signal
ViA
0.4
-
AVDD-0.4
V
Note 2
amplitude
ViAC
-
3
-
V
AC component
(VR,VG,VB)
ViDC
-
AVDD /2
-
V
DC component
VCOM
VCAC
3.5
5
7.5
Vp-p
AC component,Note 3
VCDC
-
1.4
-
V
DC component
VIH
4
-
VCC
V
VIL
0
-
1
V
Power supply
Input
H Level
Signal
voltage L Level
Remark
AC component of VGL.
Note 1
DC component of VGL.
Note 4
Note 1: The same phase and amplitude with common electrode driving signal(VCOM).
Note 2: Refer to Fig.4-(a)
Note 3: The brightness of LCD panel could be changed adjusting the AC component of VCOM.
Note 4: STHL,STHR,OEH,L/R,CPH1~CPH3,STVR,STVL,OEV,CKV,U/D.
Note 5: Be sure to apply GND, Vcc and VGL to the LCD first, and then apply VGH.
b. Current consumption (GND=AVss=0V)
Parameter
Symbol
Condition
Min.
Typ.
Max.
Unit
Current
IGH
VGH=15V
-
0.26
0.8
mA
IGL
VGL=-10V
-
-0.41
-1
mA
ICC
VCC=5V
-
6.5
12
mA
IDD
AVDD=5V
-
10
20
mA
for
driver
Remark
c. Backlight driving conditions
Parameter
Symbol
Min.
Typ.
Max.
Unit
Remark
Lamp voltage
VL
-
580
638
Vrms
Note 3
Lamp current
IL
-
6.2
7
mArms
Frequency
FL
-
60
80
KHz
Note 3,4
Lamp starting voltage
VS
930
1150
Vrms
Note 1,3
1100
1400
Vrms
Note 2,3
Note 1: Ta = 25
Note 2: Ta = 0
-
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
PAGE
:
7/19
Note 3: Reference value, correct value is subject to backlight specification.
Note 4:The lamp frequency should be selected as different as possible from display horizontal
synchronous signal to avoid interference.
4. AC Timing
a. Timing conditions
Parameter
Symbol
Min.
Typ.
Max.
Unit.
Remark
Rising time
tr
-
-
10
ns
Note 1
Falling time
tf
-
-
10
ns
Note 1
High and low level pulse width
tCPH
125
129
133
ns
CPH1~CPH3
CPH pulse duty
tCWH
tC12
tC23
tC31
40
50
60
%
CPH1~CPH3
30
tCPH/3
tCPH/2
ns
CPH1~CPH3
STH setup time
tSUH
20
-
-
ns
STHR,STHL
STH hold time
tHDH
20
-
-
ns
STHR,STHL
STH pulse width
tSTH
-
1
-
tCPH
STHR,STHL
tH
61.5
63.5
65.5
s
STHR,STHL
OEH pulse width
tOEH
-
10
-
tCPH
Sample and hold disable time
tDIS1
-
62
-
tCPH
OEV pulse width
tOEV
-
40
-
tCPH
OEV
CKV pulse width
tCKV
-
50
-
tCPH
CKV
Clean enable time
tDIS2
tSH
-
26
-
tCPH
-
0
-
tCPH/3
tDH
-
1,152
-
tCPH/3
STV setup time
tSUV
400
-
-
ns
STVL,STVR
STV hold time
tHDV
400
-
-
ns
STVL,STVR
STV pulse width
tSTV
-
-
1
tH
STVL,STVR
Horizontal lines per field
tV
256
262
268
tH
Note 2
Vertical display start
tSV
3
-
tH
Vertical display timing range
tDV
234
-
tH
VCOM rising time
trCOM
-
5
VCOM falling time
tfCOM
-
5
VCOM delay time
tDCOM
-
3
RGB delay time
tDRGB
-
1
CPH pulse delay
STH period
Horizontal display start
Horizontal display
timing range
OEH
s
s
s
s
Note 1: For all of the logic signals.
Note 2: Please don’t use odd horizontal lines to drive LCD panel for both odd and even field
simultaneously.
b. Timing diagram
Please refer to the attached drawing, from Fig.2 to Fig.6.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
PAGE
8/19
:
C. Optical specification (Note 1,Note 2, Note 3 )
Item
Symbol
Condition
Min.
Typ.
Max.
Unit
Remark
=0
-
25
30
50
60
ms
ms
Note 4,6
60
150
-
10
30
45
45
-
-
-
-
-
-
250
300
-
0.25
0.30
0.35
0.30
0.35
0.40
Response time
Rise
Fall
Contrast ratio
Tr
Tf
At optimized
CR
viewing angle
Viewing angle
Top
Bottom
Left
Right
Brightness
White chromaticity
CR
=0
YL
=0
X
=0
y
10
Note 1. Ambient temperature =25
Note 5,6
deg
Note
nit
6,7
Note 8
Note 8
. And lamp current IL = 6.2mArms.
Note 2. To be measured in the dark room.
Note 3.To be measured on the center area of panel with a viewing cone of 1
by Topcon
luminance meter BM-7, after 10 minutes operation.
Note 4. Definition of response time:
The output signals of photodetector are measured when the input signals are changed
from “black” to “white”(falling time)and from “white” to “black”(rising time),respectively.
The response time is defined as the time interval between the 10% and 90% of
amplitudes. Refer to figure as below.
"White"
"White"
Signal(Relative value)
100%
90%
10%
0%
Tr
Tf
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
PAGE
:
9/19
Note 5. Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
Photodetector output when LCD is at “White” state
Contrast ratio (CR)=
Photodetector output when LCD is at “Black” state
Note 6. White Vi=Vi50
Black Vi=Vi50
“
“
1.5V
2.0V
” means that the analog input signal swings in phase with VCOM signal.
” means that the analog input signal swings out of phase with VCOM signal.
Vi50
:
The analog input voltage when transmission is 50%
The 100% transmission is defined as the transmission of LCD panel when all the input
terminals of module are electrically opened.
Note 7. Definition of viewing angle:
Refer to figure as below.
Note 8. Measured at the center area of the panel when all the input terminals of LCD panel are
electrically opened.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
PAGE
:
10/19
D. Reliability test items:
No.
Test items
Conditions
1
High temperature storage
Ta= 80
2
Low temperature storage
Ta= -25
3
High temperature operation
Ta= 60
4
Low temperature operation
Ta= 0
5
High temperature and high humidity
Ta= 60
6
Heat shock
-20
7
Electrostatic discharge
240H
240H
240H
240H
. 95% RH
~80
Vibration
240H
/50 cycle 2H/cycle
), once for each
8
Remark
200V,200pF(0
terminal
Frequency range
: 10~55Hz
Stoke
: 1.5mm
Sweep
: 10~55Hz~10Hz
2 hours for each direction of X,Y,Z
Operation
Non-operation
Non-operation
Non-operation
JIS C7021,
A-10
condition A
(6 hours for total)
100G . 6ms,
9
Mechanical shock
X,
Y,
Z
3 times for each direction
Non-operation
JIS C7021,
A-7
condition C
Random vibration:
10
Vibration (with carton)
0.015G2/Hz from 5~200Hz
IEC 68-34
–6dB/Octave from 200~500Hz
11
Drop (with carton)
Height: 60cm
1 corner, 3 edges, 6 surfaces
JIS Z0202
Note: Ta: Ambient temperature.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
PAGE
:
11/19
E.Packing form
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
:
12/19
Fig. Outline dimension of TFT-LCD module
PAGE
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
t C31
13/19
90% 90%
CPH3
CPH2
10%
tr
50%
50%
CPH1
STHL(R)
t CWH
t CPH
tf
10%
t SUH
t C12
t C23
t STH
t HDH
:
Fig.2 Sampling clock timing
PAGE
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
14/19
Fig.3 Horizontal display timing range
:
CPH1
Output(STHR/STHL)
Input(STHL/STHR)
t DH
PAGE
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
15/19
ViAC
Blank
V R(GB)
V GL
VCOM
CKV
OEV
STHL(R)
OEH
(HSY)
V
ViDC
CDC
Black
1H
ViA
t
H
White
Blank
Black
V
V
CAC
CAC
White
:
Fig.4-(a) Horizontal timing
PAGE
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
t DIS2
t OEV
10%
t DRGB
90%
50%
10%
t rCOM
90%
50%
t DCOM
t CKV
t OEH
t DIS1
t STH
10%
t fCOM
10%
:
Fig.4-(b) Detail horizontal timing
90%
90%
PAGE
Note: The falling edge of OEV should be synchronized with the falling edge of OEH
V R(GB)
V GL
VCOM
CKV
OEV
STHL(R)
OEH
(HSY)
1H
SPEC NO. : 233-220-076
16/19
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
17/19
Fig.5 Vertical shift clock timing
:
CKV
STVR(L)
50%
t SUV
t HDV
t CKV
50%
PAGE
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
t SV
18/19
VCOM(Even field)
VCOM(Odd field)
STVL
(VSY)
(HSY)
Display on panel first line
VR(GB)
:
Fig.2-(a) Vertical timing (From up to down)
PAGE
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 233-220-076
t SV
19/19
VCOM(Even field)
VCOM(Odd field)
STVR
(VSY)
(HSY)
Display on panel first line
V R(GB)
:
Fig.6-(b) Vertical timing (From down to up)
PAGE
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
UNIPAC OPTOELECTRONICS CORPORATION
TERMS AND CONDITIONS OF SALE
These Terms and Conditions of Sale apply to all items designed and/or made by Unipac
Optoelectronics Corporation ("Unipac"), and Buyer agrees they apply to all such items.
1
ACCEPTANCE OF TERMS. BUYER ACCEPTS THESE TERMS (i) BY WRITTEN
ACCEPTANCE (BY PURCHASE ORDER OR OTHERWISE), OR (ii) BY FAILURE TO
RETURN GOODS SUPPLIED BY UNIPAC WITHIN 5 DAYS OF THEIR DELIVERY.
2
DELIVERY
2.1 Delivery will be made Free Carrier (Incoterms 1990), Unipac's warehouse,
Science-Based Industrial Park, Taiwan to a carrier designated in writing by Buyer, or if
Buyer fails to designate a carrier, to a carrier designated by Unipac.
2.2
Title to the goods and the entire risk will pass to Buyer upon delivery to carrier.
2.3 Shipments are subject to availability. Unipac shall make every reasonable effort
to meet the date(s) quoted or acknowledged; and if Unipac makes such effort, UNIPAC
WILL NOT BE LIABLE FOR ANY DELAYS.
3
TERMS OF PAYMENT
3.1 Unless otherwise stated on Unipac's quotation, all shipments shall be T/T in
advance, by Letter of Credit at Sight, or pursuant to agreed prepayment terms. Unipac
reserves the right to change credit terms at any time in its sole discretion.
3.2 Buyer guarantees prompt payment of all obligations accrued pursuant to purchase
orders issued by Buyer.
4
LIMITED WARRANTY
4.1 Unipac warrants that the goods sold will be free from defects in material and
workmanship and comply with Unipac's applicable published specifications for a period
of sixty (60) days from the date of Unipac's shipment.
THIS AGREEMENTSTATES THE ONLY AND EXCLUSIVE REMEDY FOR ANY AND
ALL CLAIMS MADE AGAINST UNIPAC UNDER ANY AGREEMENT AND/OR WITH
RESPECT TO PANELS, COMPONENTS, SERVICES AND/OR GOODS.
5.5 No action or proceeding may be commenced by either party against the other
(other than to collect money due for goods delivered or services rendered), whether for
breach, indemnification, contribution or otherwise, more than one year after delivery of
the goods to the carrier; and no claim may be brought unless the non-claiming party has
first been given commercially reasonable notice, a full written explanation of all pertinent
details (including copies of all materials), and a good faith opportunity to resolve the
matter.
5.6 BUYER EXPRESSLY AGREES TO THE LIMITATIONS OF ARTICLES 5, 8 AND
9 AND TO THEIR REASONABLENESS.
5.7 The exclusions and limitations of Articles 5, 8 and 9 will survive the termination of
the applicable Agreements, and shall apply notwithstanding any claim of a failure of any
one or more remedies to accomplish their purpose, and THE PARTIES EXPRESSLY
WAIVE AND RELINQUISH ANY CONTRARY RIGHTS UNDER ANY AGREEMENT,
AND/OR LAW, DECISION, CUSTOM OR PRACTICE.
6
SUBSTITUTIONS AND MODIFICATIONS
Unipac may at any time make substitutions for product ordered which do not materially
and adversely affect overall performance with the then current specifications in the
typical and intended use. Unipac reserves the right to halt deliveries and shipments and
alter specifications and prices without notice. Buyer shall verify that the literature and
information is current before purchasing. Other changes to process and/or specifications
by Unipac shall be pursuant to Unipac’ s standard ECN procedures.
7
CANCELLATION
4.2 Goods or parts which have been subject to abuse (including without limitation
repeated or extended exposure to conditions at or near the limits of applicable absolute
ratings) misuse, accident, alteration, neglect, or unauthorized repair or improper
application are not covered by any warranty. No warranty is made with respect to
custom products or goods produced to Buyer's specifications (unless specifically stated
in writing signed by Unipac). Unipac shall not be responsible for defects or claims
caused by acts not performed by Unipac; or by combination of goods with other things.
7.1 This Agreement may not be canceled by Buyer except with written consent by
Unipac and Buyer's payment of reasonable cancellation charges (including but not be
limited to expenses already incurred for labor and material, overhead, commitments
made by Unipac, and a reasonable profit).
4.3 No warranty is made with respect to goods used in devices intended for use in
applications where failure to perform when properly used can reasonably be expected to
result in significant injury (including, without limitation, navigation, aviation, weaponry or
nuclear equipment, or for surgical implant or to support or sustain life) and Buyer agrees
to indemnify, defend, and hold harmless Unipac from all claims, damages and liabilities
arising out of any such uses.
8.1 Unipac will, at its own expense, assist Buyer with technical support and
information in connection with any claim that any parts as shipped by Unipac under this
purchase order infringe any valid, enforceable, unexpired R.O.C. patent, copyright, or
trademark, provided however, that Buyer (i) gives immediate written notice to Unipac, (ii)
permits Unipac to participate and to defend if Unipac requests to do so, and (iii) gives
Unipac all needed information, assistance and authority. However, Unipac will not be
responsible for infringements resulting from anything not entirely manufactured by
Unipac, or from any combination with products, equipment, or materials not furnished by
Unipac. Unipac will have no liability with respect to intellectual property matters arising
out of products made to Buyer's specifications, code, or designs.
4.4 This Article 4 is the only warranty by Unipac with respect to goods and may not be
modified or amended except in writing signed by an authorized officer of Unipac.
4.5 Buyer acknowledges and agrees that it is not relying on any applications,
diagrams or circuits contained in any literature, and Buyer will test all parts and
applications under extended field and laboratory conditions. Notwithstanding any crossreference or any statements of compatibility, functionality, interchangeability, and the
like, the goods may differ from similar goods from other vendors in performance,
function or operation, and in areas not contained in the written specifications, or as to
ranges and conditions outside such specifications; and Buyer agrees that there are no
warranties and that Unipac is not responsible for such things.
4.6 REGARDLESS OF CAUSE OR REASON FOR DAMAGE (WHETHER
ACCIDENT, NEGLIGENCE, OR OTHERWISE) UNIPAC SHALL HAVE NO LIABILITY
(DIRECT, CONSEQUENTIAL OR OTHER) FOR, IN CONNECTION WITH OR ARISING
FROM PROPERTY FURNISHED FOR USE AT OR LEFT AT UNIPAC; and by
delivering or entrusting property to Unipac, Buyer expressly confirms this limitation.
Notwithstanding this limitation, Unipac will replace, or pay the reasonable retooling costs
to replace, masks damaged or destroyed as a result of Unipac's gross negligence or
fault.
4.7 EXCEPT AS PROVIDED ABOVE, UNIPAC MAKES NO WARRANTIES OR
CONDITIONS, EXPRESS, IMPLIED, OR STATUTORY; AND UNIPAC EXPRESSLY
EXCLUDES AND DISCLAIMS ANY WARRANTY OR CONDITION OF NONINFRINGEMENT, MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE
OR APPLICATION.
7.2
8
In no event will Buyer have rights in partially completed goods.
INDEMNIFICATION
8.2 Except as expressly stated in this Article 8 or in another writing signed by an
authorized officer, Unipac makes no representations and/or warranties with respect to
intellectual and/or industrial property and/or with respect to claims of infringement.
8.3 Except as to claims Unipac agrees in writing to defend, BUYER WILL INDEMNIFY,
DEFEND AND HOLD HARMLESS UNIPAC FROM ALL CLAIMS, COSTS, LOSSES,
AND DAMAGES (INCLUDING ATTORNEYS FEES) AGAINST AND/OR ARISING OUT
OF GOODS SOLD AND/OR SHIPPED HEREUNDER.
9
NO CONFIDENTIAL INFORMATION
Unipac shall have no obligation to hold any information in confidence except as
provided in a separate non-disclosure agreement signed by both parties.
10 ENTIRE AGREEMENT
These terms and conditions are the entire agreement between Unipac and Buyer, and
no addition, deletion or modification shall be binding on Unipac unless expressly agreed
to in a writing signed by an officer of Unipac. Buyer is not relying upon any warranty or
representation except for those specifically stated here.
11 APPLICABLE LAW
This Agreement and all performance and disputes arising out of or relating to goods
involved will be governed by the laws of Taiwan, Republic of China, without reference to
conflict of laws principles and excluding the U.N. Convention on Contracts for the
5
LIMITATION OF LIABILITY
International Sale of Goods. Buyer agrees at its sole expense to comply with all
applicable laws in connection with the purchase, use or sale of the goods provided
5.1 Unipac will not be liable for any loss, damage or penalty resulting from causes
beyond its reasonable control, including but not limited to delay by others, force majeure, hereunder.
acts of God, material shortage or labor conditions. In any such event, the date(s) for
12 DISPUTE RESOLUTION
Unipac's performance will be deemed extended for a period equal to any delay resulting.
12.1 Buyer and Unipac shall cooperate and attempt in good faith to resolve any and all
5.2 THE LIABILITY OF UNIPAC ARISING OUT OF THIS AGREEMENT OR ANY
disputes arising out of and/or relating to this Agreement and/or goods furnished
GOODS SOLD WILL BE LIMITED TO REFUND OF THE PURCHASE PRICE OR
pursuant to this Agreement.
(WITH UNIPAC'S PRIOR WRITTEN CONSENT) REPAIR OR REPLACEMENT OF
12.2 Any disputes relating to and/or arising out of any Agreement and/or goods
PURCHASED GOODS (RETURNED TO UNIPAC FREIGHT PRE-PAID); OR IN THE
furnished pursuant to this Agreement that cannot be so resolved will be decided
EVENT OF A FAILURE OR BREACH BY UNIPAC REGARDING DELIVERY, AN
exclusively by binding arbitration. Such arbitration shall take place in Taipei, Taiwan
AMOUNT EQUAL TO THE TOTAL PURCHASE PRICE OF THE GOODS THAT HAVE
pursuant to the Rules for International Arbitrations under the American Arbitration
NOT BEEN DELIVERED DUE TO SUCH FAILURE.
Association.
5.3 Buyer will not return any goods without first obtaining a customer return order
12.3 Notwithstanding anything to the contrary, any party may apply to any court of
number.
competent jurisdiction for interim injunctive relief with respect to irreparable harm which
5.4 AS A SEPARATE LIMITATION, IN NO EVENT WILL UNIPAC BE LIABLE (i) FOR cannot be avoided and/or compensated by such arbitration proceedings, without breach
COSTS OF SUBSTITUTE GOODS, (ii) FOR ANY SPECIAL, CONSEQUENTIAL,
of this Article 12 and without any abridgment of the powers of the arbitrators.
INCIDENTAL, RELIANCE OR INDIRECT DAMAGES, OR (iii) FOR LOSS OF USE,
13 ATTORNEYS' FEES
OPPORTUNITY, MARKET POTENTIAL, GOODWILL AND/OR PROFIT ON ANY
Reasonable attorneys' fees and costs will be awarded to the prevailing party in the
THEORY (CONTRACT, TORT, FROM THIRD PARTY CLAIMS OR OTHERWISE).
event of litigation involving the enforcement or interpretation of this Agreement.
THESE LIMITATIONS SHALL APPLY NOTWITHSTANDING ANY FAILURE OF
ESSENTIAL PURPOSE OR OF ANY FAILURE OR INADEQUACY OF ANY REMEDY.
Unipac optoelectronics corp.
No. 5 , Li-Hsin Road 6,
Science-Based Industrial Park,
Hsin-Chu City, Taiwan, R.O.C.
Fax : 886-3-5632899
Tel : 886-3-5645768
Unipac copyright 1999
All rights reserved,
Copying forbidden.