ALUMINUM ELECTROLYTIC CAPACITORS UT 6mmL Chip Type , Wide Temperature Range series Chip type with load life 2000 hours at +105°C. Designed for surface mounting on high density PC board. Applicable to automatic mounting machine using carrier tape. Specifications Item Performance Characteristics Category Temperature Range –55 ~ +105°C Rated Voltage Range 4 ~ 50V Rated Capacitance Range 0.1 ~ 100µF Capacitance Tolerance ±20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3(µA), whichever is greater. Measurement frequency :120Hz, Temperature : 20°C tan δ 4 0.37 Rated voltage(V) tan δ ( MAX.) 6.3 0.28 10 0.24 16 0.20 25 0.16 35 0.13 50 0.12 Measurement frequency : 120Hz 4 6 12 Rated voltage(V) Z—25°C/ Z+20°C Impedance ratio Z—40°C/ Z+20°C ZT/Z20(MAX.) Stability at Low Temperature 6.3 3 8 10 3 5 16 2 4 25 2 3 35 2 3 50 2 3 Capacitance change tan δ Within ±25% of initial value (16V or less) Within ±20% of initial value (25V or more) 200% or less of initial specified value Leakage current Initial specified value or less Endurance After 2000 hours' application of rated voltage at 105°C , capacitors meet the characteristics requirements listed at right. Shelf Life After leaving capacitors under no load at 105°C for 1000 hours, they meet the specified value for endurance characteristics listed above. Resistance to soldering heat The capacitors shall be kept on the hot plate maintained at 250°C for 30 seconds. After removing from the hot plate and restored at room temperature, they meet the characteristics requirements listed at right. Marking Black print on the case top. Capacitance change tan δ Leakage current Within ±10% of initial value Initial specified value or less Initial specified value or less Type numbering system (Example : 16V 10µF) Chip Type Positive C±0.2 0.5 ~ 0.8 L±0.3 Voltage mark for 6.3V is φD 4 A B C E L E B±0.2 φD±0.5 X2P 10 16V Lot No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 UU T 1 C 1 0 0 MCR 1 GS A±0.2 Plastic platform 0.3MAX. Voltage A±0.2 Capacitance 0.5MAX. 105°C Marking 1.8 4.3 4.3 1.0 5.8 5 2.1 5.3 5.3 1.3 5.8 (mm) 6.3 2.4 6.6 6.6 2.2 5.8 Taping code Configuration Capacitance tolerance (±20%) Rated Capacitance (10µF) Rated voltage (16V) Series name Negative Type 6V . Dimensions 4 0G V Cap.(µF) 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 33 47 100 Code 0R1 R22 R33 R47 010 2R2 3R3 4R7 100 220 330 470 101 4 5 5 6.3 6.3 0J 22 30 36 60 4 5 5 6.3 10 1A 22 30 36 60 5 5 6.3 6.3 16 1C 27 35 46 60 4 5 6.3 6.3 25 1E 18 30 40 50 4 5 6.3 6.3 35 1V 13 23 38 48 4 5 6.3 50 1H 15 25 42 4 4 4 4 4 4 4 5 6.3 1.0 2.6 3.2 3.8 6.2 11 14 19 30 Allowable Rated ripple Case size ripple Rated Ripple (mA rms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz ~ 1.50 Taping Specifications are given in page 21. Please refer to page 3 for the minimum order quantity. CAT.8100P