ALUMINUM ELECTROLYTIC CAPACITORS UL Chip Type, Long Life Assurance series Chip type with load life of 5000 hours at +105°C. Designed for surface mounting on high density PC board. Adapted to the RoHS directive (2002/95/EC). CB UL Long Life UA Long Life Specifications Item Performance Characteristics Category Temperature Range – 40 ~ +105°C Rated Voltage Range 6.3 ~ 50V Rated Capacitance Range 0.1 ~ 1000µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current After 2 minutes' application of rated voltage, leakage current is not more than 0.01 CV or 3 (µA), Max Measurement frequency : 120Hz, Temperature : 20°C tan δ 6.3 0.32 Rated voltage (V) tan δ (MAX.) 10 0.24 16 0.20 25 0.16 35 0.13 50 0.12 Measurement frequency : 120Hz 6.3 4 10 Rated voltage (V) Z– 25°C / Z+20°C Impedance ratio ZT / Z20 (MAX.) Z– 40°C / Z+20°C Stability at Low Temperature After 5000 hours' application of rated voltage at 105°C , capacitors meet the characteristic requirements listed at right. Endurance 10 3 7 16 2 5 25 2 3 Capacitance change tan δ Leakage current 35 2 3 50 2 3 Within ±30% of initial value 300% or less of initial specified value Initial specified value or less After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above. The capacitors shall be kept on the hot plate maintained at 250°C Capacitance change Within ±10% of initial value for 30 seconds. After removing from the hot plate and restored tan δ Initial specified value or less at room temperature, they meet the characteristic requirements Leakage current Initial specified value or less listed at right. Shelf Life Resistance to soldering heat Black print on the case top. Marking Type numbering system (Example : 16V 100µF) Chip Type (φ4 ~ 6.3) Lot No. 2 3 4 5 6 7 8 9 10 11 12 13 14 Package code E Configuration A±0.2 L±0.3 Capacitance 1 UU L 1 C 1 0 1 M C L 1 GS A±0.2 C±0.2 B±0.2 n2 10C UL Voltage (C : 16V) φD±0.5 Series 0.5 MAX. Positive Plastic platform 0.3 MAX. H Capacitance tolerance (–20%) Rated Capacitance (100 µF) Negative φD 4 ~ 6.3 8 ¥ 10 Code CL NL Rated voltage (16V) Series name Type (φ8 ~ 10 ) Lot No. 10 A 16 C 25 E 35 V (mm) A±0.2 A±0.2 E L±0.5 Capacitance Negative Pressure relief vent Voltage V 6.3 Code j C±0.2 B±0.2 n2 100V UL Trade mark Plastic platform 0.3 MAX. Series φD±0.5 Voltage (V : 35V) 0.5 MAX. Positive 50 H H φD×L 4 × 5.8 5 × 5.8 6.3 × 5.8 6.3 × 7.7 8 × 10 A 1.8 2.1 2.4 2.4 2.9 3.2 B 4.3 5.3 6.6 6.6 8.3 10.3 C 4.3 5.3 6.6 6.6 8.3 10.3 E 1.0 1.3 2.2 2.2 3.1 4.5 L 5.8 5.8 5.8 7.7 10 10 H 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.5 ~ 0.8 0.8 ~ 1.1 0.8 ~ 1.1 10 × 10 Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS UL series Dimensions V Cap. (µF) Code 6.3 10 16 25 35 50 0J 1A 1C 1E 1V 1H 0.1 0R1 4 × 5.8 1.0 0.22 R22 4 × 5.8 2.6 0.33 R33 4 × 5.8 3.2 0.47 R47 4 × 5.8 3.8 1 010 4 × 5.8 2.2 2R2 4 × 5.8 11 3.3 3R3 4.7 4R7 10 100 22 220 33 330 5 × 5.8 47 470 100 6.2 4 × 5.8 14 4 × 5.8 15 5 × 5.8 19 4 × 5.8 18 5 × 5.8 25 5 × 5.8 25 6.3 × 5.8 30 5 × 5.8 30 5 × 5.8 30 6.3 × 5.8 42 6.3 × 5.8 42 6.3 × 7.7 49 35 5 × 5.8 35 6.3 × 5.8 48 6.3 × 5.8 48 6.3 × 7.7 57 8 × 10 77 5 × 5.8 36 6.3 × 5.8 50 6.3 × 5.8 50 6.3 × 7.7 63 8 × 10 92 8 × 10 92 101 6.3 × 5.8 60 6.3 × 7.7 81 6.3 × 7.7 81 8 × 10 116 10 × 10 151 10 × 10 151 220 221 6.3 × 7.7 101 8 × 10 141 10 × 10 216 10 × 10 216 10 × 10 216 330 331 8 × 10 160 10 × 10 238 10 × 10 238 10 × 10 238 470 471 10 × 10 254 10 × 10 254 10 × 10 254 1000 102 10 × 10 313 Case size φ D × L (mm) Rated ripple Rated Ripple (mArms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency Coefficient 50 Hz 0.70 120 Hz 1.00 300 Hz 1.17 1 kHz 1.36 10 kHz~ 1.50 Taping specifications are given in page 24. Recommended land size, soldering by reflow are given in page 25, 26. Please refer to page 3 for the minimum order quantity. CAT.8100V