Series X57X Quick-Release Universal Zero-Insertion-Force DIP Test Socket FEATURES • Universal Test Socket accepts devices on 0.300 to 0.600 [7.62 to 15.24] centers •All pin count sockets go into PCB with either 0.300 or 0.600 [7.62 to 15.24] centers •Swing quick-release handle down to open contacts and insert device. Release and handle automatically returns as contacts close onto device leads •Socket handle can be mounted on either the right or left side •Sockets can be soldered into PCBs or plugged into any socket GENERAL SPECIFICATIONS •STANDARD SOCKET BODY: (for -10, -10TL, -11, -16 sockets) black UL 94V-0 glass-filled Polyphenylene Sulfide (PPS) •HIGH-TEMPERATURE SOCKET BODY: (for -18 socket) natural color PolyCUSTOMIZATION: In addition to the standard products shown etheretherketone (PEEK) on this page, Aries specializes in custom design and production. •HANDLE: Stainless Steel Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the •HANDLE KNOB: Brass 360, 1/2-hard (no knob on loop handle) right to change product general specifications without notice. •CONTACT MATERIAL: (for -10, -10TL, -11) BeCu 172 per QQ-C-553; (for -16) Spinodal; (for -18) BeNi 360, 1/2-hard •ALL BECU CONTACTS: 50μ [1.27µ] min. Ni under plate per QQ-N-290, over plated with either: -10 200μ [5.08μ] min. matte Sn per ASTM B545-97; or -10TL 200μ [5.08μ] min. 90/10 Sn/Pb per MIL-T-10727-11 10μ [0.25μ] min. Au per MIL-G-45204 •SPINODAL CONTACT PLATING: (for -16) 50μ [1.27µ] min. NiB ORDERING INFORMATION •HIGH-TEMPERATURE BeNi CONTACT PLATING: (for -18) 50μ [1.27μ] NiB XX-X57X-1 8 •CONTACT CURRENT RATING: 1 amp •INSULATION RESISTANCE: 1000 mΩ min. Plating Pins •DIELECTRIC WITHSTANDING VOLTAGE: 1000 24, 28, 32, 36, 0= Sn over Ni VAC OTL= Sn/Pb over Ni 40, 42, 44, 48 •LIFE CYCLE: 25,000 to 50,000 cycles 1= Ay over Ni Row-to-Row Spacing (btm) •OPERATING TEMPERATURE: min. -67°F 6= NiB (Spinodal) 3 = 0.300 [7.62] [-55°C]; max. 221°F [105°C] for 8= Hi-temp Socket* 6 = 0.600 [15.24] (std) Sn plating, 302°F [150°C] for Au plating, 392°F Solder Pin Tail [200°C] for NiB plating, 45° Handle Options 482°F [250°C] for high-temperature socket 0= Long Handle, right side •RETENTION FORCE (closed): 55 grams/pin 1= Long Handle, left side based on a 0.020 [0.51] dia. test lead 2= Short Handle, right side •ACCEPTS LEADS: 0.015-0.035 [0.38-0.89] 3= Short Handle, left side wide, 0.110-0.280 [2.79-7.11] long 4= Loop Handle, right side 5= Loop Handle, left side MOUNTING CONSIDERATIONS * NOTE: only Loop Handle available •See socket footprint below w/hi-temp. socket Handle Dim “H1” Dim. “H2” Dim “H3” Long w/Knob 0.568 [14.43] 0.300 [7.62] 0.471 [11.96] Short w/ Knob 0.317 [8.05] Loop (no Knob) 0.270 [6.86] 0.400 [10.16] 0.193 [4.90] Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 0.252 [6.40] 0.405 [10.29] 10019 1 of 2 Rev. AA Series X57X Quick-Release Universal Zero-Insertion-Force DIP Test Socket ALL DIMENSIONS: INCHES [MILLIMETERS] ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED “A” = (NO. OF PINS PER ROW x 0.100 [2.54]) + 0.590 [14.99] “B” = (NO. OF PINS PER ROW -1) x 0.100 [2.54] “C” = (NO. OF PINS PER ROW x 0.100 [2.54] + 0.415 [10.54] SOCKET FITS ARIES TEST SOCKET RECEPTACLE XX-6556-XX OR SIMILAR COMPETITOR’S MODELS. CONSULT DATA SHEET 10003 CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 WWW.ARIESELEC.COM • [email protected] PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED 10019 2 of 2 Rev. AA