5 0 - 4 0 0 W P C B M O U N T I N G MODULES 24V 2nd Gen C O M P O N E N T S Features • • • • • Input Voltage: 18-36Vdc Output Voltage: 2-48Vdc Output Power (per module):Maxi: 400W Micro: 100W Efficiency: Up to 90% Agency Approvals: UL, CSA, TUV, VDE, BABT,CE Marked, C-Tick Selection Table Specifications Units Notes Set point accuracy ±1% Vout nom. Line regulation ±0.02% Vout nom. Nominal input; full load; 25oC Low line to high line; full load No load to full load; nominal input Load regulation Temperature regulation Ripple and noise, p-p ±0.02% Vout nom. ±0.002% Vout/°C -20oC to 100oC 100mV Full load, 20 MHz bandwidth Remote sense compensation 0.5 Volts Overvoltage set point 115% Vout nom. Current limit 115% out max. Vout 95% of nominal Efficiency: 5V out 83% 24Vout 88% Nominal input; 80% load; 25oC Nominal input; 80% load; 25oC Programming range Short circuit current Isolation voltage OUTPUT VOLTAGE (VDC) 3.3V OUTPUT POWER (W) MAXI MICRO MINI 264 150 75/50 5V 400 200 100/50 12V 400 200 100/50 15V 400 200 100/50 24V 400 200 100/50 28V 400 200 100/50 48V 400 200 100/50 Product Grade Specifications E C T H M Operating Temp. (°C) -10 to 100 -20 to 100 -40 to 100 -40 to 100 -55 to 100 Storage Temp. (°C) -20 to 125 -40 to 125 -40 to 125 -55 to 125 -65 to 125 Temp. Cycling none none none Burn-In none none none 12 hours 10-110% Vout nom. Low Temp.Test (°C) none none none -40°C -55°C 115% out max. Output voltage <250mV High Temp.Test (°C) none none none 100°C 100°C Final Test Data none none none Input to Output Mechanical Drawings refer to page 237-238 *Other O/P voltage consult sales 3000Vrms (typical unless otherwise noted) (°C) 24 hours 24 hours (-55 to 125) (-65 to 125) 24 hours STANDARDS AND APPROVALS C-Tick AS/NZS CISPR11 Group 1 Class A Part Numbering 24 Your dependable power partner – www.powerbox.com.au 233