5 0 - 5 0 0 W P C B M O U N T I N G MODULES 300V 2nd Gen C O M P O N E N T S Features • • • • • Input Voltage: 180-375Vdc Output Voltage: 2-48Vdc Output Power (per module):Maxi: 500W Mini: 250W Micro: 150W Efficiency: Up to 91% Agency Approvals: UL, CSA, TUV, VDE, BABT,CE Marked, C-Tick Specifications Selection Table GENERAL OUTPUT VOLTAGE (VDC) OUTPUT POWER (W) MAXI MINI MICRO 160 100 50 Units Notes Set point accuracy ±1% Vout nom. Nominal input; 2V Line regulation ±0.02% Vout nom. Low line to high 3.3V 264 150 75/50 Load regulation ±0.02% Vout nom. No load to full 5V 400 200 100/50 Temperature regulation ±0.002% Vout/oC -20°C to 100°C 12V 500 250 150/75 Full load, 20MHz 15V 500 250 150/75 24V 500 250 150/75 28V 500 250 150/75 48V 500 250 150/75 Ripple and noise, p-p 100mV Remote sense compensation 0.5Volts Overvoltage set point 115%Vout nom. Current limit 115% Iout max. Vout 95% of nominal Efficiency: 5Vout 82% Nominal input; Programming range 10-110% Vout nom. Short circuit current 115%Iout max. Output Voltage Storage Temp. (°C) -20 to 125 -40 to 125 -40 to 125 -55 to 125 -65 to 125 Isolation voltage 3000Vrms Input to Output Temp. Cycling Product Grade Specifications E C T H M Operating Temp. (°C) -10 to 100 -20 to 100 -40 to 100 -40 to 100 -55 to 100 none none none 24 hours 24 hours (typical unless otherwise noted) (°C) STANDARDS AND APPROVALS Burn-In none none none 12 hours C-Tick Low Temp.Test (°C) none none none -40°C -55°C High Temp.Test (°C) none none none 100°C 100°C Final Test Data none none none AS/NZS CISPR11 Group 1 Class A (-55 to 125) (-65 to 125) 24 hours Mechanical Drawings refer to page 237-238 *Other O/P voltage consult sales Part Numbering 300 Your dependable power partner – www.powerbox.com.au 235