T-1 3/4 (5mm) VARIABLE HEIGHT LED BOARD INDICATOR Part Number: WP7113BR6.35/ID High Efficiency Red Features Description z LED FIRMLY HELD BY SPACER-NO ADDITIONAL The High Efficiency Red source color devices are made with FIXTURING OR GLUEING NECESSARY. Gallium Arsenide Phosphide on Gallium Phosphide Orange zSUITABLE FOR BACK PANEL ILLUMINATION,CIRCUIT Light Emitting Diode. BOARD INDICATOR, LED INDICATOR. zUL RATING:94V-0. zHOUSING MATERIAL:TYPE 66 NYLON. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2103 REV NO: V.2 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1102001487 Selection Guide Part No. Dice WP7113BR6.35/ID Iv (mcd) [2] @ 10mA Lens Type High Efficiency Red (GaAsP/GaP) Viewing Angle [1] Min. Typ. 2θ1/2 8 45 30° RED DIFFUSED Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA IR Reverse Current High Efficiency Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2103 REV NO: V.2 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1102001487 High Efficiency Red WP7113BR6.35/ID SPEC NO: DSAF2103 REV NO: V.2 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1102001487 PACKING & LABEL SPECIFICATIONS WP7113BR6.35/ID SPEC NO: DSAF2103 REV NO: V.2 DATE: MAY/23/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1102001487