XC6205 Series
High Speed LDO Regulators
Preliminary
Low ESR Cap. Compatible, Output On/Off Control
February 07, 2003 Ver. 2
CMOS Low Power Consumption 70µA
Maximum Output Current : 150mA
Highly Accurate
: ± 2% (± 30mV less than 1.5V)
Output Voltage Range
: 0.9V ~ 1.75V (50mV Step)
High Ripple Rejection
: 60dB
Low Noise
: 30µVrms
Low ESR capacitor compatible
General Description
Applications
z
z
z
z
z
z
z
Mobile phones, Cordless phones
Wireless communication equipment
Portable games
Cameras, Video recorders
Portable AV equipment
Reference voltage
Battery powered equipment
Features
The XC6205 series are highly precise, low noise, positive
voltage LDO regulators manufactured using CMOS processes.
The series achieves high ripple rejection and low dropout and
consists of a voltage reference, an error amplifier, a current
limiter and a phase compensation circuit plus a driver transistor.
Output voltage is selectable in 50mV increments within a range
of 0.9V ~ 1.75V.
The series is also compatible with low ESR ceramic capacitors
which give added output stability. This stability can be
maintained even during load fluctuations due to the excellent
transient response of the series.
The current limiter's foldback circuit also operates as a short
protect for the output current limiter and the output pin.
The CE function enables the output to be turned off, resulting in
greatly reduced power consumption.
Maximum Output Current
: 150mA
Maximum Operating Voltage
: 2.0V ~ 10V
Output Voltage Range
: 0.9V~1.75V(50mV Step)
Highly Accurate
: ±2% (VOUT>1.5V)
: ±30mV (VOUT≤1.5V)
Low Power Consumption
: TYP 70µA
Standby Current
: Less than 0.1µA (TYP)
Low Noise
: 30µVrms (TYP)
High Ripple Rejection
: 60dB (10kHz)
Operating Temperature Range
: -40OC ~ +85OC
Low ESR Capacitor Compatible
: Ceramic capacitor
Ultra Small Packages
: SOT-25 (SOT-23-5)
SOT-89-5
USP-6B
Typical Application
Electrical Characteristics
Load Transient Response
XC6205B092
VIN=2V, tr=tf=5µsec
CIN=1µF(ceramic), CL=4.7µF(ceramic)
250
0.95
200
CIN
1µF
Output Voltage
0.90
150
0.85
100
50mA
0.80
Output Current
50
1mA
0.75
0
Time (40µsec/div)
1
Output Current (mA)
NC
4
3
CE
CL
2.2µF
Output Voltage (V)
2
VSS
VOUT
1.00
5
1
VIN
XC6205 Series
High Speed LDO Regulators
Preliminary
Low ESR Cap. Compatible, Output On/Off Control
Pin Assignment
SOT-25
1
2
3
4
5
Block Diagram
PIN NUMBER
SOT-89-5 USP-6B
4
1
2
5
3
6
1
2, 4
5
3
PIN NAME
FUNCTION
VIN
VSS
CE
NC
VOUT
Input
Ground
ON/OFF Control
No Connection
Output
VIN
CE
ON/OFF
Control
each circuit
Current
Limiter
VOUT
R2
Pin Configuration
VOUT
(NC)
4
5
R1
VOUT VSS
2
5
VIN 1
6 CE
NC 2
5 VSS
VOUT 3
1
VIN
2
VSS
3
CE
1
NC
SOT-25 (SOT-23-5)
(TOP VIEW)
2
VSS
VSS
Voltage
Reference
VIN
4
* The diode in the above diagram is for the IC's protection.
4 NC
3
CE
SOT-89-5
(TOP VIEW)
USP-6B
(TOP VIEW)
Selection Guide
The following options for the CE pin logic and internal pull-up/down are available:
Active 'High' + no pull-down resistor built-in (standard)
Active 'High' + 300MΩ pull-down resistor built-in <between CE-V SS> (semi-custom)
Active 'Low' + no pull-up resistor built-in (semi-custom)
Active 'Low' + 300MΩ pull-up resistor built-in <between V IN-CE> (semi-custom)
Note: *With the pull-up resistor or pull-down resistor built-in types, the supply current during operation will increase
by VIN / 300MΩ (TYP.).
Ordering Information
XC6205123456
DESIGNATOR SYMBOL
DESCRIPTION
A
Active 'High'
(pull-down resistor built in)
B
Active 'High'
(no pull-down resistor built in)
1
C
Active 'Low'
(pull-up resistor built in)
D
Active 'Low'
(no pull-up resistor built in)
DESIGNATOR SYMBOL
Output Voltage : 100mV Step
2
3
Integer
Accuracy : within ±2%
e.g. 2=0, 3=9, 4=2 ⇒ 0.9V
4
Output Voltage : 50mV Step
A
Accuracy : within ±2%
e.g. 2=1, 3=3, 4=A ⇒ 1.35V
5
M
D
Output Voltage :
2
DESCRIPTION
Package Type : SOT-25(SOT-23-5)
USP - 6B
Device Orientation :
6
e.g. 1.5V = 2 : 1, 3 : 5
2
R
Embossed Tape : Standard Feed
L
Embossed Tape : Reverse Feed
XC6205 Series
High Speed LDO Regulators
Preliminary
Low ESR Cap. Compatible, Output On/Off Control
Absolute Maximum Rating
PARAMETER
RATINGS
Input Voltage
SYMBOL
VIN
12
V
Output Current
IOUT
mA
Output Voltage
VOUT
500
VSS -0.3 ~ VIN +0.3
CE Input Voltage
VCE
VSS -0.3 ~ VIN +0.3
V
Power
Dissipation
SOT-25(SOT-23-5)
UNITS
V
250
Pd
USP-6B
mW
100
Operating Ambient Temperature
Topr
-40 ~ +85
O
Storage Temperature
Tstg
-55 ~ +125
O
Electrical Characteristics
C
C
XC6205x152 (1.5V)
Ta=25OC
PARAMETER
SYMBOL
CONDITIONS
Output Voltage
VOUT (E)
IOUT=30mA
Maximum Output Current
IOUTMAX
Load Regulation
∆VOUT
1mA≤IOUT≤100mA
15
Vdif1
IOUT=30mA
500
mV
Vdif2
IOUT=100mA
Supply Current
IDD
VCE=VIN
600
70
mV
µA
2
Standby Current
Istby
VCE=VSS
0.01
0.10
µA
2
∆VOUT /
VOUT(T)+1.0V≤VIN≤10V
∆VIN ⋅ VOUT
IOUT=30mA
0.01
0.20
%/V
1
10.0
V
-
ppm/OC
1
60
dB
4
30
µVrms
3
300
mA
1
Dropout Voltage
Line Regulation
Output Voltage
∆VOUT /
IOUT=30mA
∆Topr ⋅ VOUT
-40OC≤Topr≤85OC
Ripple Rejection Rate
PSRR
IOUT=50mA, f=10kHz
Output Noise
en
Current Limiter
Ilim
Ishort
CE "High" Voltage
VCEH
CE "Low" Voltage
VCEL
CE "High" Current
ICEH
CE "Low" Current
ICEL
MAX
× 0.98
VOUT(T)
× 1.02
1.470
1.500
1.530
2.0
Temperature Characteristics
Short-circuit Current
TYP
150
VIN
Input Voltage
MIN
50
100
300Hz ~ 50kHz
VIN=VOUT+1.5V, VOUT=VSS
UNITS
CIRCUIT
V
1
mA
1
mV
1
mA
1
1.60
VIN
V
2
0.25
-0.10
0.10
V
µA
2
VCE=VIN
VCE=VSS
-0.10
0.10
µA
2
50
NOTE
(NOTE 1) VOUT(T)=Specified Output Voltage
(NOTE 2) VOUT(E)=Effective Output Voltage
(I.e. the output voltage when "V OUT(T)+1.0V" is provided at the V IN pin while maintaining a certain I OUT value).
(NOTE 3) Vdif={VIN1
(NOTE5)
-VOUT1
(NOTE4)
1
}
(NOTE 4) VOUT 1 = A voltage equal to 98% of the Output Voltage whenever an amply stabilized IOUT {VOUT(T) + 1.0V} is input.
(NOTE 5) VIN1=The Input Voltage when VOUT1 appears as Input Voltage is gradually decreased.
(NOTE 6) Unless otherwise stated, V IN=VOUT(T)+1.0V
3
2
XC6205 Series
High Speed LDO Regulators
Preliminary
Low ESR Cap. Compatible, Output On/Off Control
! Test Circuits
Circuit 1
VIN
CE
V
VSS
CIN=1.0µF
(ceramic)
A
VOUT
CL=2.2µF
(ceramic)
RL
V
V
Circuit 2
A
VIN
VOUT
CE
A
OPEN
VSS
Circuit 3
VOUT
VIN
CE
CIN=1.0µF
(ceramic)
VSS
CL=2.2µF
(ceramic)
F.F.T
IOUT=10mA
Circuit 4
VIN
VIN={VOUT+1} VDC
+0.5Vp-pAC
CE
V
IOUT=50mA
VOUT
VSS
4
CL=2.2µF
(ceramic)
V
XC6205 Series
High Speed LDO Regulators
Preliminary
Low ESR Cap. Compatible, Output On/Off Control
! Operational Explanation
Output voltage control with the XC6205 series :
VIN
CE
ON/OFF
Control
The voltage divided by resistors R1 & R2 is compared
with the internal reference voltage by the error amplifier.
each circuit
The P-Channel MOSFET, which is connected to the
VOUT pin, is then driven by the subsequent output
signal. The output voltage at the VOUT pin is controlled
& stabilized by a system of negative feedback.
Current
Limiter
VOUT
R2
The current limit circuit and short protect circuit operate
in relation to the level of output current. Further, the IC's
internal circuitry can be shutdown via the CE pin's signal.
R1
Voltage
Reference
VSS
Low ESR Capacitors
With the XC6205 series, a stable output voltage is achievable even if used with low ESR capacitors as a phase
compensation circuit is built-in. In order to ensure the effectiveness of the phase compensation, we suggest that an
output capacitor (CL) is connected as close as possible to the output pin (V OUT) and the VSS pin. Please use an
output capacitor with a capacitance value as shown in the figure below. Also, please connect an input capacitor
(CIN) of 0.1µF between the VIN pin and the VSS pin in order to ensure a stable power input.
Recommended Output Capacitor Values
VOUT
CL
0.9V ~ 1.2V
4.7µF
1.25V ~ 1.75V
2.2µF
Current Limiter, Short-Circuit Protection
The XC6205 series includes a combination of a fixed current limiter circuit & a foldback circuit which aid the
operations of the current limiter and circuit protection. When the load current reaches the current limit level, the
fixed current limiter circuit operates and output voltage drops. As a result of this drop in output voltage, the foldback
circuit operates, output voltage drops further and output current decreases. When the output pin is shorted, a
current of about 50mA flows. However, when the input/output voltage differential is quite small, this current will be
about 200mA.
CE Pin
The IC's internal circuitry can be shutdown via the signal from the CE pin with the XC6205 series. In shutdown
mode, output at the VOUT pin will be pulled down to the VSS level via R1 & R2. The operational logic of the IC's CE
pin is selectable (please refer to the selection guide on page 2). Note that as the standard XC6205B type is ' High
Active/No Pull Down', operations will become unstable with the CE pin open. Although the CE pin is equal to an
inverter input with CMOS hysteresis, with either the pull-up or pull-down options, the CE pin input current will
increase when the IC is in operation. We suggest that you use this IC with either a VIN voltage or a VSS voltage
input at the CE pin. If this IC is used with the correct specifications for the CE pin, the IC will operate normally.
However, supply current may increase as a result of through current in the IC's internal circuitry.
5
XC6205 Series
High Speed LDO Regulators
Preliminary
Low ESR Cap. Compatible, Output On/Off Control
Minimum Operating Voltage
In order to stablize the IC's operations, an input voltage of more than 2.0V is needed. Should the input voltage be
less than 2.0V, the output voltage may not be regulated correctly. (Please refer to the graph data below.)
1 When VIN is less than 2.0V, the CE pin remains in standby mode.
When VIN rises above 2.0V, the power supply will turn ON.
2 The input power supply will begin to rise after a few hundred µsec.
(Please also refer to the transient response characteristics.)
" Input Voltage vs. Output Voltage
Output Voltage VOUT (V)
XC6205B092
1.2
IOUT=1mA
CIN=4.7µ F(ceramic), CL=4.7µ F(ceramic)
1.0
0.8
0.6
Topr= -40OC
25OC
85OC
0.4
0.2
0.0
0.0
2.0
4.0
6.0
8.0
10.0
Input Voltage VIN (V)
" Enable Response Time
" Turn-On Response Time
XC6205B092
XC6205B092
CL=4.7µ F(ceramic)
VIN=2.0V,CL=4.7µ F(ceramic)
Output Voltage
1.0
-2
-4
IOUT=1mA
30mA
100mA
0.5
0.0
-6
2.0
2
1.5
0
Output Voltage
1.0
-2
-4
IOUT=1mA
30mA
100mA
0.0
-6
TIME (40usec/div)
TIME (40usec/div)
! Notes on Use
1 Please use this IC within the stated absolute maximum ratings.
The IC is liable to malfunction should the ratings be exceeded.
2 Where wiring impedance is high, operations may become unstable due to noise and/or phase lag
depending on output current. Please strengthen V IN and VSS wiring in particular.
3 Please wire the input capacitor (CIN) and the output capacitor (CL) as close to the IC as possible.
6
0.5
Output Voltage (V)
1.5
0
Input Voltage (V)
2.0
Output Voltage (V)
CE Input Voltage (v)
Input Voltage
CE Input Voltage
2
2.5
4
2.5
4
XC6205 Series
High Speed LDO Regulators
Low ESR Cap. Compatible, Output On/Off Control
Preliminary
XC6205
(1) Output Voltage vs. Output Current
XC6205x152
XC6205x092
VIN=2.0V
CIN=1.0µF(ceramic), CL=4.7µF(ceramic)
1.6
Output Voltage VOUT (V)
Output Voltage VOUT (V)
1.0
0.9
Topr= -40OC
25OC
85OC
0.8
VIN=2.5V
CIN=1.0µF(ceramic), CL=2.2µF(ceramic)
0.7
0.6
1.5
Topr= -40OC
25OC
85OC
1.4
1.3
1.2
0
40
80
120
160
0
200
40
80
120
160
200
Output Current IOUT (mA)
Output Current IOUT (mA)
(2) Output Voltage vs. Output Current (current limit)
XC6205x152
XC6205x092
VIN=2.0V
CIN=1.0µF(ceramic), CL=4.7µF(ceramic)
1.8
Output Voltage VOUT (V)
Output Voltage VOUT (V)
1.2
1.0
0.8
Topr= -40OC
25OC
85OC
0.6
0.4
0.2
1.6
1.4
1.2
Topr= -40OC
25OC
85OC
1.0
0.8
0.6
0.4
0.2
0.0
0.0
0
100
200
300
0
400
200
300
400
Output Current IOUT (mA)
XC6205x092
XC6205x152
Output Voltage VOUT (V)
0.8
2.5V
5.0V, 10.0V
3.0V
0.4
0.2
Topr=25OC
CIN=1.0µF(ceramic), CL=2.2µF(ceramic)
1.8
1.0
0.6
100
Output Current IOUT (mA)
Topr=25OC
CIN=1.0µF(ceramic), CL=4.7µF(ceramic)
1.2
Output Voltage VOUT (V)
VIN=2.5V
CIN=1.0µF(ceramic), CL=4.7µF(ceramic)
VIN=2.0V
1.5
3.0V
1.2
5.0V, 10.0V
0.9
2.5V
0.6
VIN=2.0V
0.3
0.0
0.0
0
100
200
300
0
400
100
200
300
Output Current IOUT (mA)
Output Current IOUT (mA)
7
400
XC6205 Series
High Speed LDO Regulators
Low ESR Cap. Compatible, Output On/Off Control
Preliminary
(3) Output Voltage vs. Input Voltage
XC6205x092
1.2
1.0
0.9
0.8
IOUT=
1mA
= 30mA
= 100mA
0.7
0.6
0.5
0.90
0.85
IOUT=
1mA
= 30mA
= 100mA
0.80
0.75
0.5
1.0
1.5
2.0
2.5
2
8
10
XC6205x152
XC6205x152
1.4
1.3
1.2
1.1
12
Topr=25OC
CIN=1.0µF(ceramic), CL=2.2µF(ceramic)
1.80
Output Voltage VOUT (V)
1.5
6
Input Voltage VIN (V)
IOUT=
1mA
= 30mA
= 100mA
1.6
4
Input Voltage VIN (V)
Topr=25OC
CIN=1.0µF(ceramic), CL=2.2µF(ceramic)
1.7
Output Voltage VOUT (V)
Topr=25OC
CIN=1.0µF(ceramic), CL=4.7µF(ceramic)
0.95
1.1
Output Voltage VOUT (V)
Output Voltage VOUT (V)
XC6205x092
Topr=25OC
CIN=1.0µF(ceramic), CL=4.7µF(ceramic)
1.70
1.60
1.50
1.40
IOUT=
1mA
= 30mA
= 100mA
1.30
1.20
1.10
1.00
1.0
1.0
1.5
2
2.0
4
6
8
10
12
Input Voltage VIN (V)
Input Voltage VIN (V)
(4) Dropout Voltage vs. Output Current
XC6205x152
XC6205x092
CIN=1.0µF(ceramic), CL=4.7µF(ceramic)
1.2
1.0
0.8
0.6
Topr= 85OC
25OC
- 40OC
0.4
CIN=1.0µF(ceramic), CL=2.2µF(ceramic)
1.4
Dropout Voltage Vdif (V)
Dropout Voltage Vdif (V)
1.4
0.2
1.2
Topr= 85OC
25OC
- 40OC
1.0
0.8
0.6
0.4
0.2
0.0
0.0
0
40
80
120
160
0
200
40
80
120
160
Output Current IOUT (mA)
Output Current IOUT (mA)
8
200
XC6205 Series
High Speed LDO Regulators
Low ESR Cap. Compatible, Output On/Off Control
Preliminary
(5) Supply Current vs. Input Voltage
XC6205x092
XC6205x092
80
70
Supply Current ISS (µA)
Supply Current ISS (µA)
80
60
50
40
30
Topr= 85OC
25OC
- 40OC
20
10
0
70
60
Topr= 85OC
25OC
- 40OC
50
40
0.0
0.5
1.0
1.5
2.0
2.5
3.0
2
3
Input Voltage VIN (V)
4 5 6 7 8 9
Input Voltage VIN (V)
XC6205x152
XC6205x152
90
80
70
Supply Current ISS (µA)
Supply Current ISS (µA)
10
60
50
40
Topr= 85OC
25OC
- 40OC
30
20
10
0
80
70
Topr= 85OC
25OC
- 40OC
60
50
40
0.0
0.5
1.0 1.5 2.0 2.5
Input Voltage VIN (V)
2
3.0
3
4
5
6
7
8
9
Input Voltage VIN (V)
10
(6) Output Voltage vs. Ambient Temperature
XC6205x152
XC6205x092
VIN=2.0V
CIN=1.0µF(ceramic), CL=4.7µF(ceramic)
Output Voltage VOUT (V)
Output Voltage VOUT (V)
1.1
1.0
0.9
IOUT=
1mA
= 10mA
= 30mA
= 100mA
= 150mA
0.8
0.7
VIN=2.5V
CIN=1.0µF(ceramic), CL=2.2µF(ceramic)
1.7
1.6
1.5
IOUT= 1mA
= 10mA
= 30mA
= 100mA
= 150mA
1.4
1.3
1.2
0.6
-50
-20
10
40
70
-50
100
-20
10
40
70
Ambient Temperature Topr (OC)
O
Ambient Temperature Topr ( C)
9
100
XC6205 Series
High Speed LDO Regulators
Low ESR Cap. Compatible, Output On/Off Control
Preliminary
(7) Supply Current vs. Ambient Temperature
XC6205x092
VIN=2.0V
80
60
40
20
80
60
40
20
0
0
-50
-20
10
40
70
-50
100
(8) CE Pin Threshold Voltage vs. Ambient Temperature
XC6205xxx2
VIN=VOUT+1V, RL=100Ω
CIN=1.0µF(ceramic), CL=4.7µF(ceramic)
CE "High" Voltage
1.50
1.00
0.50
CE "Low" Voltage
0.00
-50
-25
0
25
50
75
10
40
70
100
Ambient Temperature Topr ( C)
Ambient Temperature Topr ( C)
2.00
-20
O
O
Threshold Voltage VCEH, VCEL(V)
VIN=2.5V
100
Supply Current ISS (mA)
Supply Current ISS (µA)
XC6205x152
100
O
Ambient Temperature Topr ( C)
10
XC6205 Series
High Speed LDO Regulators
Low ESR Cap. Compatible, Output On/Off Control
Preliminary
(9) Load Transient Response
XC6205x092
XC6205x092
Output Voltage
1.00
75
0.95
60
0.90
45
0.85
Output Current
0.80
30mA
30
0.75
1mA
15
Output Voltage (V)
0.90
200
0.85
150
Output Current
0.80
100mA
0.75
1mA
50
Time (40µsec/div)
XC6205x152
XC6205x152
VIN=2.5V
CIN=1.0µF(ceramic),CL=2.2µF(ceramic)
VIN=2.5V
CIN=1.0µF(ceramic),CL=2.2µF(ceramic)
1.50
1.60
75
1.55
60
1.45
45
Output Current
1.40
30mA
30
1.35
1mA
15
1.30
Output Voltage (V)
Output Voltage
90
Output Current (mA)
1.60
Output Voltage (V)
100
0
Time (40µsec/div)
1.55
250
Output Voltage
0.70
0
0.70
300
300
250
Output Voltage
1.50
200
1.45
150
Output Current
1.40
100mA
100
1.35
1mA
50
1.30
0
Output Current (mA)
0.95
90
Output Current (mA)
Output Voltage (V)
1.00
VIN=2.0V
CIN=1.0µF(ceramic),CL=4.7µF(ceramic)
Output Current (mA)
VIN=2.0V
CIN=1.0µF(ceramic),CL=4.7µF(ceramic)
0
Time (40µsec/div)
Time (40µsec/div)
(10) Input Transient Response 1
XC6205x152
XC6205x092
CL=2.2µF(ceramic)
0
1.5
Output Voltage
-2
-4
1.0
-6
1mA
30mA
100mA
Input Voltage (V)
2.0
Output Voltage (V)
Input Voltage (V)
2
IOUT=
5.0
2.5
Input Voltage
3.0
Input Voltage
2.5
2.5
2.0
0.0
Output Voltage
1.5
-2.5
1.0
-5.0
IOUT=
0.5
-7.5
0.0
Time (40µsec/div)
11
0.5
0.0
-10.0
Time (40µsec/div)
1mA
30mA
100mA
Output Voltage (V)
CL=4.7µF(ceramic)
4
XC6205 Series
High Speed LDO Regulators
Low ESR Cap. Compatible, Output On/Off Control
Preliminary
(11) Input Transient Response 2
XC6205x092
XC6205x092
IOUT=1mA,CL=4.7µF(ceramic)
1.2
Input Voltage
4
1.0
Output Voltage
1
0.9
0
0.8
-1
0.7
3
1.1
2
1.0
Output Voltage
1
0.9
0
0.8
-1
0.7
Time (40µsec/div)
Time (40µsec/div)
XC6205x152
XC6205x152
IOUT=1mA,CL=2.2µF(ceramic)
IOUT=100mA,CL=2.2µF(ceramic)
4
2
1.6
Output Voltage
1
1.5
0
1.4
-1
1.3
Output Voltage (V)
1.7
Input Voltage
Input Voltage (V)
1.8
3
1.8
1.7
Input Voltage
2
1.6
Output Voltage
1
1.5
0
1.4
-1
1.3
Output Voltage (V)
2
4
Input Voltage (V)
1.2
Output Voltage (V)
1.1
Input Voltage (V)
3
3
IOUT=100mA,CL=4.7µF(ceramic)
Input Voltage
Output Voltage (V)
Input Voltage (V)
4
Time (40µsec/div)
Time (40µsec/div)
(12) Enable Response Time
XC6205x152
XC6205B092
VIN=2.0V, CL=4.7µF(ceramic)
VIN=2.5V, CL=2.2µF(ceramic)
2.5
5.0
2
2.0
2.5
0
1.5
-4
Output Voltage
IOUT=
-6
1.0
1mA
30mA
100mA
Input Voltage (V)
-2
Output Voltage (V)
Input Voltage (V)
CE Input Voltage
2.5
0.0
2.0
Output Voltage
-2.5
1.5
-5.0
1.0
IOUT=
0.5
-7.5
0.0
-10.0
12
1mA
30mA
100mA
0.5
0.0
Time (40µsec/div)
Time (40µsec/div)
3.0
CE Input Voltage
Output Voltage (V)
4
XC6205 Series
High Speed LDO Regulators
Low ESR Cap. Compatible, Output On/Off Control
Preliminary
(13) Ripple Rejection Rate
XC6205x152
VIN=2.5VDC+0.5Vp-pAC
IOUT=30mA, CL=4.7µF(ceramic)
90
Ripple Rejection Rate RR (dB)
Ripple Rejection Rate RR (dB)
XC6205x092
80
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
VIN=2.5VDC+0.5Vp-pAC
IOUT=30mA, CL=2.2µF(ceramic)
90
80
70
60
50
40
30
20
10
0
0.01
Ripple Frequency f (kHz)
0.1
1
10
Ripple Frequency f (kHz)
13
100