XC6220 Series
ETR0341-007
1A LDO Voltage Regulator with “GreenOperation”
☆GreenOperation-Compatible
■GENERAL DESCRIPTION
The XC6220 series is a highly accurate, low noise, high speed, low dropout, and large current CMOS voltage regulator with
GreenOperation function. The series consists of a voltage reference, an error amplifier, a current limiter, an inrush current
prevention circuit and a phase compensation circuit plus a driver transistor.
With a 0.2Ω on-resistance driver transistor integrated and with output currents up to 1A, the ultra low dropout voltage
performance greatly extends battery life as does the GreenOperation function which can switch between high speed and
power save modes automatically.
Low ESR ceramic capacitors can be used for the output stabilization capacitor (CL).
Output voltage is selectable in 0.05V increments within the range of 0.8V~5.0V, using laser trimming technologies.
An over current protection circuit and a thermal shutdown circuit are built in. The over current protection circuit will operate
when the output current reaches its limit current. The thermal shutdown circuit will operate when the junction temperature
reaches its limit temperature. The inrush protection circuit works by controlling the inrush current which is charged to CL when
the IC starts up. In this way, any fluctuations to VIN caused by inrush current during system start up can be minimized.
The CE function enables the output to be turned off and the IC becomes a stand-by mode resulting in greatly reduced power
consumption.
■APPLICATIONS
■FEATURES
Maximum Output Current
: 1000mA (TYP.:1200mA limit)
(1.2V≦VOUT≦5.0V)
Dropout Voltage
: 20mV @ 100mA (VOUT=3.0V)
●CD-ROM, CD-R/RW drives
●DVD drives
●HDD drives
: 60mV@ 300mA (VOUT=3.0V)
Operating Voltage Range
: 1.6V ~ 6.0V
●MIDs, UMPCs
Output Voltage Range
: 0.8V ~ 5.0V (0.05V increments)
●Digital still cameras, Video cameras
Accuracy
:±1% (VOUT≧2.0V)
:±20mV (VOUT＜2.0V)
●Portable AV equipment
: 8μA (TYP.) in PS mode
Operating Temperature
Thermal Shutdown
Inrush Current Protection
CL Auto Discharge
CE Pull-Down Resistor
Output Capacitor
Packages
Environmentally Friendly
: 50μA (TYP.) in HS mode
: - 40℃~ +85℃
: Detect 150℃, Release 135℃(TYP.)
: 700mA (MAX.)
: XC6220B/D Series
: XC6220C/D Series
: Ceramic Capacitor Compatible
: USP-6C, SOT-25, SOT-89-5
: EU RoHS Compliant, Pb Free
■TYPICAL PERFORMANCE
CHARACTERISTICS
XC6220x 181
CE=VIN, CIN=CL =10μF (ceramic)
500
Dropout Voltage: Vdif (mV)
■TYPICAL APPLICATION CIRCUIT
Low Power Consumption
Topr=25℃
Topr=-40℃
Topr=85℃
400
300
200
100
0
0
200
400
600
800
1000
Output Current: IOUT (mA)
1/30
XC6220 Series
■PIN CONFIGURATION
VIN
6
1
VOUT
VIN
5
2
VOUT
VSS
4
3
CE
VOUT
VOUT
NC
5
4
VIN
5
2
4
1
2
3
1
2
3
VIN
VSS
CE
CE
VSS
NC
USP-6C
SOT -25
SOT-89-5
(BOTTOM VIEW)
( TOP VIEW)
(TOP VIEW)
* The No.5 and 6 VIN pins should be connected. The
No.1 and 2 pins VOUT pins should be connected. The
dissipation pad for the USP-6C package should be
solder-plated in recommended mount pattern and
metal masking so as to enhance mounting strength
and heat release.
If the pad needs to be connected
to other pins, it should be connected to the VSS (No. 4)
■PIN ASSIGNMENT
SOT-25
3
1
2
5
4
2/30
PIN NUMBER
SOT-89-5
1
4
2
5
3
USP-6C
3
6&5
4
1&2
-
PIN NAME
FUNCTIONS
CE
VIN
VSS
VOUT
NC
ON/OFF Control
Power Input
Ground
Output
No connection
XC6220
Series
■PRODUCT CLASSIFICATION
●Selection Guide
Please see the optional setting for CL discharge and internal CE pull-down.
PRODUCT NAME
XC6220A
XC6220B
XC6220C
XC6220D
CONDITIONS
without CE Pull-down resistor, without CL auto discharge (Semi-custom)
without CE Pull-down resistor, with CL auto discharge (Standard)
with CE Pull-down resistor, without CL auto discharge (Semi-custom)
with CE Pull-down resistor, with CL auto discharge (Semi-custom)
●Ordering Information
XC6220 ①②③④⑤⑥-⑦(
DESIGNATOR
*1)
DESCRIPTION
①
Type of CE
② ③
Output Voltage
SYMBOL
A
B
C
D
08~50
1
④
Output Voltage
Accuracy
B
MR
MR-G
⑤⑥-⑦
Packages
Taping Type (*2)
PR
PR-G
ER
ER-G
(*1)
(*2)
DESCRIPTION
without CE Pull-down resistor, without CL discharge (Semi-custom)
without CE Pull-down resistor, with CL discharge (Standard)
with CE Pull-down resistor, without CL discharge (Semi-custom)
with CE Pull-down resistor, with CL discharge (Semi-custom)
e.g. 3.0V → ①=3, ②=0
Output voltage {○.○0v} (the 2nd decimal place is “0”)
:HS Mode
Accuracy±1%(VOUT(T)≧2.1V), within 0.02V (VOUT(T)≦2.0V)
:PS Mode
Accuracy±2%(VOUT(T)≧2.1V), within 0.04V (VOUT(T)≦2.0V)
Output voltage {○.○5v} (the 2nd decimal place is “5”)
:HS Mode
Accuracy±1%(VOUT(T)≧2.05V), within 0.02V (VOUT(T)≦1.95V)
:PS Mode
Accuracy±2%(VOUT(T)≧2.05V), within 0.04V (VOUT(T)≦1.95V)
SOT-25
SOT-25 (Halogen & Antimony free)
SOT-89-5
SOT-89-5 (Halogen & Antimony free)
USP-6C
USP-6C (Halogen & Antimony free)
The “-G” suffix indicates that the products are Halogen and Antimony free as well as being fully RoHS compliant.
The device orientation is fixed in its embossed tape pocket. For reverse orientation, please contact your local Torex sales office or
representative. (Standard orientation: ⑤R-⑦, Reverse orientation: ⑤L-⑦)
3/30
XC6220 Series
■BLOCK DIAGRAMS
●XC6220A Series (Semi-custom)
●XC6220B Series
●XC6220C Series (Semi-custom)
●XC6220D Series (Semi-custom)
* Diodes inside the circuits are ESD protection diodes and parasitic diodes.
■ABSOLUTE MAXIMUM RATINGS
Ta=25℃
PARAMETER
SYMBOL
RATINGS
Input Voltage
VIN
6.5
V
Output Current (*1)
IOUT
1400
mA
Output Voltage
VOUT
VSS -0.3 ~ VIN +0.3
V
CE Input Voltage
VCE
V
mW
℃
Operating Temperature Range
Topr
VSS -0.3 ~ 6.5
250
(*2)
600 （PCB mounted）
500
(*2)
1300 （PCB mounted）
120
1000 （PCB mounted）(*2)
- 40 ~ + 85
Storage Temperature Range
Tstg
- 55 ~ + 125
SOT-25
Power Dissipation
SOT-89-5
Pd
USP-6C
*1 Please use within the range of IOUT=Pd / (VIN – VOUT)
*2: The power dissipation figure shown is PCB mounted. Please refer to pages 15～17 for details.
4/30
UNITS
℃
XC6220
Series
■ELECTRICAL CHARACTERISTICS
●XC6220A/B/C/D Series
PARAMETER
Output Voltage
SYMBOL
VOUT(E)
Ta=25℃
CONDITIONS
MIN.
High Speed Mode (HS)
2.0V≦VOUT(T)≦5.0V
VCE=VIN, IOUT=30mA
×0.99
×1.01
High Speed Mode (HS)
0.8V≦VOUT(T)≦1.95V
VCE=VIN, IOUT=30mA
-0.02
+0.02
ΔVOUT
Dropout Voltage1 (*4)
Vdif
Dropout Voltage2 (*4)
Vdif
Supply Current 2
Stand-by Current
MAX.
CIRCUIT
V
①
mA
①
mV
①
see the Voltage Chart
mV
①
see the Voltage Chart
mV
①
μA
②
μA
②
μA
②
①
VOUT(T)
(*3)
Power Save Mode (PS)
2.0V≦VOUT(T)≦5.0V
VCE=VIN, IOUT=0.1mA
×0.98
×1.02
Power Save Mode (PS)
0.8V≦VOUT(T)≦1.95V
VCE=VIN, IOUT=0.1mA
-0.04
+0.04
700
1200
-
IOUTMAX
Load Regulation
Supply Current 1
UNITS
(*2)
High Speed Mode(HS)、VCE=VIN
VIN=VOUT(T)+1.0V
0.8V≦VOUT(T)≦1.15V
Output Current
TYP.
ISS1
ISS2
ISTBY
Line Regulation
ΔVOUT/
(ΔVIN・VOUT)
Input Voltage
VIN
Output Voltage
Temperature
Characteristics
ΔVOUT/
(ΔTa・VOUT)
High Speed Mode(HS)、VCE=VIN
VIN=VOUT(T)+1.0V
1.2V≦VOUT(T)≦5.0V
1000
1200
-
High Speed Mode (HS), VCE=VIN
10mA≦IOUT≦300mA
-
10
45
High Speed Mode (HS)
IOUT=300mA, VCE=VIN
High Speed Mode(HS)
IOUT=1000mA, VCE=VIN
High Speed Mode(HS)
VIN=VCE=VOUT(T)+1.0V
IOUT=10mA (A/B Series)
High Speed Mode(HS)
VIN=VCE=VOUT(T)+1.0V
IOUT=10mA (C/D Series)
Power Save Mode(PS)
VIN=VCE=VOUT(T)+1.0V
IOUT=0.1mA
Power Save Mode(PS)
VIN=VCE=VOUT(T)+1.0V
IOUT=0.1mA
VIN=6.0V, VCE=VSS
VOUT(T)+0.5V≦VIN≦6.0V
：1.1V≦VOUT(T)≦5.0V
High Speed Mode (HS), VCE=VIN
IOUT=100mA
1.6V≦VIN≦6.0V
：0.8V≦VOUT(T)≦1.05V
High Speed Mode (HS), VCE=VIN
IOUT=100mA
High Speed Mode (HS), VCE=VIN
IOUT=30mA
-40℃≦Ta≦85℃
-
50
108
-
50
see the
Voltage
Chart
-
8
18
-
8
-0.1
0.01
see the
Voltage
Chart
0.1
-
0.01
0.20
%/V
1.6
-
6.0
V
-
±100
-
ppm/℃
①
5/30
XC6220 Series
■ELECTRICAL CHARACTERISTICS (Continued)
PARAMETER
SYMBOL
CONDITIONS
MIN.
TYP.
MAX.
UNITS
CIRCUIT
-
50
-
dB
③
705
1200
mA
①
1005
1200
-
-
180
-
mA
①
1.0
2.0
-
mA
⑤
-
5.0
10
mA
⑤
-
3.0
-
mA
⑤
μs
⑤
④
④
VIN=5.75VDC+0.5Vp-pAC
：4.75V≦VOUT(T)≦5.0V
High Speed Mode (HS), VCE=VIN
IOUT=30mA, f=1kHz
Ripple Rejection Rate
PSRR
Limit Current
ILIM
Short Current
ISHORT
PS Switching Current
IGOR
HS Switching Current
IGO
Switch Current
Hysteresis Range
IGOhys
PS Switching Delay Time
tDPS
CE High Level Voltage
CE Low Level Voltage
VCEH
VCEL
CE High Level Current
ICEH
CE Low Level Current
ICEL
CL Discharge Resistance
(*7)
RDCHG
VIN=｛VOUT(T)+1.0｝
VDC+0.5Vp-pAC
：0.85V≦VOUT(T)≦4.7V
High Speed Mode (HS), VCE=VIN
IOUT=30mA、f=1kHz
VIN=1.85VDC+0.5Vp-pAC
：VOUT(T)=0.8V
High Speed Mode (HS), VCE=VIN
IOUT=30mA, f=1kHz
VCE=VIN= VOUT(T)+1.0V
0.8V≦VOUT(T)≦1.15V
VCE=VIN
VIN= VOUT(T)+1.0V
1.2V≦VOUT(T)≦5.0V
VCE=VIN
Short VOUT to VSS level
：1.45V≦VOUT(T)≦5.0V
VIN=VOUT(T)+1.0V, VCE=“H ”Level
：0.8V≦VOUT(T)≦1.4V
VIN=1.6V, VCE=“H ”Level
IOUT=heavy to light load
：1.45V≦VOUT(T)≦5.0V
VIN=VOUT(T)+1.0V, VCE=“H ”Level
：0.8V≦VOUT(T)≦1.4V
VIN=1.6V, VCE=“H ”Level
IOUT=light to heavy load
IGOhys=IGO-IGOR
VCE=VIN=VOUT(T)+1.0V,
(HS/PS Auto-Switching)
Time until HS mode is changed-over to
PS mode by IGOR.
VCE=VIN
VCE=VSS
1.2
-
-
6.0
0.3
V
V
VCE=VIN (A/B series)
-0.1
-
0.1
μA
-
9
15
μA
-0.1
-
0.1
μA
④
VIN=6.0V, VOUT=5.0V, VCE= VSS
-
460
-
Ω
①
VCE=VIN=6.0V (C/D series)
VCE=VSS
see the Voltage Chart
Thermal Shutdown
Detect Temperature
TTSD
Junction Temperature
-
150
-
℃
Thermal Shutdown
Release Temperature
TTSR
Junction Temperature
-
135
-
℃
Inrush Current
IRUSH
VIN=VOUT(T)+1.0V、CL=22μF
VCE=0V→VOUT(T)+1.0V
(Only when rising and within 1ms)
-
-
700
mA
④
⑥
NOTE:
*1: Unless otherwise stated, VIN=VOUT (T) +1.0V.
*2: VOUT (E)= Effective output voltage (see the voltage chart)
(ie. The output voltage when “VOUT (T)+1.0V” is provided at the VIN pin while maintaining a certain IOUT value.
*3: VOUT (T): Nominal output voltage
(*6)
(*5)
*4: Vdif={VIN1 - VOUT1 }
*5: VOUT1=A voltage equal to 98% of the VOUT(T) when an amply stabilized IOUT {VOUT(T)+1.0V} is input in the HS mode.
*6: VIN1=The input voltage when VOUT1 appears as input voltage is gradually decreased.
*7: For the XC6220B/D series only. The XC6220A/C series (semi-custom) discharges by resistors R1 and R2 only as shown in the block
diagrams.
*8: For the XC6220A/C series, output voltage rises when the IC is in the high temperature stand-by mode.
6/30
XC6220
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart 1
NOMINAL
OUTPUT
VOLTAGE
OUTPUT
DROPOUT
DROPOUT
VOLTAGE 1
VOLTAGE 2
VOLTAGE 1
VOLTAGE 2
CURRENT 1
CURRENT 2
（HS Mode）
(PS Mode)
Vdif 1 (mV)
Vdif 2 (mV)
(XC6220C/D )
(XC6220C/D )
(V)
(V)
IOUT=300mA
IOUT=1000mA
(μA)
(μA)
VOUT
VOUT
Vdif
Vdif
ISS1
ISS2
tDPS
MAX.
(V)
VOUT(T)
MIN.
MAX.
MIN.
MAX.
0.80
0.7800
0.8200
0.7600
0.8400
0.85
0.8300
0.8700
0.8100
0.8900
0.90
0.8800
0.9200
0.8600
0.9400
0.95
0.9300
0.9700
0.9100
0.9900
1.00
0.9800
1.0200
0.9600
1.0400
1.05
1.0300
1.0700
1.0100
1.0900
1.10
1.0800
1.1200
1.0600
1.1400
1.15
1.1300
1.1700
1.1100
1.1900
1.20
1.1800
1.2200
1.1600
1.25
1.2300
1.2700
1.30
1.2800
1.3200
1.35
1.3300
1.40
TYP.
400
MAX.
MAX.
575
－
240
405
180
305
SUPPLY
SUPPLY
PS
OUTPUT
MAX.
MAX.
112.500
22.500
112.625
22.625
112.750
22.750
112.875
22.875
113.000
23.000
113.125
23.125
113.250
23.250
113.375
23.375
1.2400
113.500
23.500
1.2100
1.2900
113.625
23.625
1.2600
1.3400
113.750
23.750
1.3700
1.3100
1.3900
113.875
23.875
1.3800
1.4200
1.3600
1.4400
114.000
24.000
1.45
1.4300
1.4700
1.4200
1.4800
114.125
24.125
1.50
1.4800
1.5200
1.4700
1.5300
114.250
24.250
1.55
1.5300
1.5700
1.5100
1.5900
114.375
24.375
1.60
1.5800
1.6200
1.5600
1.6400
114.500
24.500
1.65
1.6300
1.6700
1.6100
1.6900
114.625
24.625
1.70
1.6800
1.7200
1.6600
1.7400
114.750
24.750
1.75
1.7300
1.7700
1.7100
1.7900
114.875
24.875
1.80
1.7800
1.8200
1.7600
1.8400
115.000
25.000
1.85
1.8300
1.8700
1.8100
1.8900
115.125
25.125
1.90
1.8800
1.9200
1.8600
1.9400
115.250
25.250
1.95
1.9300
1.9700
1.9100
1.9900
115.375
25.375
2.00
1.9800
2.0200
1.9600
2.0400
115.500
25.500
2.05
2.0295
2.0705
2.0090
2.0910
115.625
25.625
2.10
2.0790
2.1210
2.0580
2.1420
115.750
25.750
2.15
2.1285
2.1715
2.1070
2.1930
115.875
25.875
2.20
2.1780
2.2220
2.1560
2.2440
116.000
26.000
2.25
2.2275
2.2725
2.2050
2.2950
116.125
26.125
2.30
2.2770
2.3230
2.2540
2.3460
116.250
26.250
2.35
2.3265
2.3735
2.3030
2.3970
116.375
26.375
2.40
2.3760
2.4240
2.3520
2.4480
116.500
26.500
2.45
2.4255
2.4745
2.4010
2.4990
116.625
26.625
2.50
2.4750
2.5250
2.4500
2.5500
116.750
26.750
2.55
2.5245
2.5755
2.4990
2.6010
116.875
26.875
2.60
2.5740
2.6260
2.5480
2.6520
117.000
27.000
2.65
2.6235
2.6765
2.5970
2.7030
117.125
27.125
2.70
2.6730
2.7270
2.6460
2.7540
117.250
27.250
2.75
2.7225
2.7775
2.6950
2.8050
117.375
27.375
2.80
2.7720
2.8280
2.7440
2.8560
117.500
27.500
2.85
2.8215
2.8785
2.7930
2.9070
117.625
27.625
2.90
2.8710
2.9290
2.8420
2.9580
117.750
27.750
2.95
2.9205
2.9795
2.8910
3.0090
117.875
27.875
150
100
85
215
460
150
130
655
65
110
SWITCH
DELAY
TIME
(μs)
650
850
1200
7/30
XC6220 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart 2
NOMINAL
OUTPUT
VOLTAGE
OUTPUT
OUTPUT
DROPOUT
DROPOUT
SUPPLY
SUPPLY
VOLTAGE
VOLTAGE
VOLTAGE 1
VOLTAGE 2
CURRENT 1
CURRENT 2
（HS Mode）
(PS Mode)
Vdif 1 (mV)
Vdif 2 (mV)
(XC6220C/D)
(XC6220C/D)
(V)
(V)
IOUT=300mA
IOUT=1000mA
(μA)
(μA)
VOUT
VOUT
Vdif
Vdif
ISS1
ISS2
tDPS
MAX.
(V)
VOUT(T)
MIN.
MAX.
MIN.
MAX.
MAX.
MAX.
3.00
2.9700
3.0300
2.9400
3.0600
118.000
28.000
3.05
3.0195
3.0805
2.9890
3.1110
118.125
28.125
3.10
3.0690
3.1310
3.0380
3.1620
118.250
28.250
3.15
3.1185
3.1815
3.0870
3.2130
118.375
28.375
3.20
3.1680
3.2320
3.1360
3.2640
118.500
28.500
3.25
3.2175
3.2825
3.1850
3.3150
118.625
28.625
3.30
3.2670
3.3330
3.2340
3.3660
118.750
28.750
3.35
3.3165
3.3835
3.2830
3.4170
118.875
28.875
3.40
3.3660
3.4340
3.3320
3.4680
119.000
29.000
3.45
3.4155
3.4845
3.3810
3.5190
119.125
29.125
3.50
3.4650
3.5350
3.4300
3.5700
119.250
29.250
3.55
3.5145
3.5855
3.4790
3.6210
119.375
29.375
3.60
3.5640
3.6360
3.5280
3.6720
119.500
29.500
3.65
3.6135
3.6865
3.5770
3.7230
119.625
29.625
3.70
3.6630
3.7370
3.6260
3.7740
119.750
29.750
3.75
3.7125
3.7875
3.6750
3.8250
119.875
29.875
3.80
3.7620
3.8380
3.7240
3.8760
120.000
30.000
3.85
3.8115
3.8885
3.7730
3.9270
120.125
30.125
3.90
3.8610
3.9390
3.8220
3.9780
120.250
30.250
3.95
3.9105
3.9895
3.8710
4.0290
120.375
30.375
4.00
3.9600
4.0400
3.9200
4.0800
120.500
30.500
4.05
4.0095
4.0905
3.9690
4.1310
120.625
30.625
4.10
4.0590
4.1410
4.0180
4.1820
120.750
30.750
4.15
4.1085
4.1915
4.0670
4.2330
120.875
30.875
4.20
4.1580
4.2420
4.1160
4.2840
121.000
31.000
4.25
4.2075
4.2925
4.1650
4.3350
121.125
31.125
4.30
4.2570
4.3430
4.2140
4.3860
121.250
31.250
4.35
4.3065
4.3935
4.2630
4.4370
121.375
31.375
4.40
4.3560
4.4440
4.3120
4.4880
121.500
31.500
4.45
4.4055
4.4945
4.3610
4.5390
121.625
31.625
4.50
4.4550
4.5450
4.4100
4.5900
121.750
31.750
4.55
4.5045
4.5955
4.4590
4.6410
121.875
31.875
4.60
4.5540
4.6460
4.5080
4.6920
122.000
32.000
4.65
4.6035
4.6965
4.5570
4.7430
122.125
32.125
4.70
4.6530
4.7470
4.6060
4.7940
122.250
32.250
4.75
4.7025
4.7975
4.6550
4.8450
122.375
32.375
4.80
4.7520
4.8480
4.7040
4.8960
122.500
32.500
4.85
4.8015
4.8985
4.7530
4.9470
122.625
32.625
4.90
4.8510
4.9490
4.8020
4.9980
122.750
32.750
4.95
4.9005
4.9995
4.8510
5.0490
122.875
32.875
5.00
4.9500
5.0500
4.9000
5.1000
123.000
33.000
8/30
PS
SWITCH
TYP.
60
MAX.
MAX.
95
655
53
85
DELAY
TIME
(μs)
1200
1450
XC6220
Series
■OPERATIONAL EXPLANATION
ON/OFF
Control
CE
V IN
-
CE
RCE
Error
Amp
CE/
+
Current
Limit
each
circuit
VOUT
Green
Operation
Thermal
Protection
R1
CE/
R2
Voltage
Reference
V SS
The voltage divided by resistors R1 & R2 is compared
with the internal reference voltage by the error amplifier.
The P-channel MOSFET which is connected to the VOUT
pin is then driven by the subsequent output signal. The
output voltage at the VOUT pin is controlled & stabilized
by a system of negative feedback. The current limit
circuit and short protect circuit operate in relation to the
level of output current. The GO function monitors the
output current and switches the IC between two
operating modes according to the level of output
current. Further, the IC's internal circuitry can be
shutdown via the CE pin's signal.
XC6220x 301
CE=VIN, Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
50
Supply Current: ISS (μA)
<GreenOperation>
The XC6220 series always operates in a green operation (GO) mode.
The GO mode enables the IC to switch automatically between the high
speed (HS) mode or the power save (PS) mode according to the level of
output current. The switching point of the HS mode and the PS mode is
fixed inside the IC. When the output current becomes IGOR=1.0mA (MIN.)
or below, the mode changes automatically to the PS mode after a delay
time of hundreds of microseconds. Supply current in light load is greatly
reduced. Also when the output current becomes IGO 10mA (MAX.) or
more, the mode changes automatically to the HS mode and the IC
returns to high speed operation.
40
30
20
10
0
0
5
10
15
20
Output Current: IOUT (mA)
<Low ESR capacitor>
The XC6220 series has a built-in phase compensation circuit which means that a stable output voltage is achieved even if
the IC is used with low ESR capacitors. In order to ensure stable phase compensation it is recommended that a CL capacitor
is connected as close as possible to the VOUT pin and VSS pin. For a stable power supply, please connect an input capacitor
(CIN) between the VIN pin and the VSS pin.
Values required for the phase compensation are shown in the chart below. If a loss of the capacitance happens, the stable
phase compensation may not be obtained. Please ensure to use a capacitor which does not depend on bias or temperature
too much.
Recommended output capacitor (CL) Values corresponding to input capacitor (CIN)
INPUT CAPACITOR VALUE
OUTPUT VOLTAGE (V)
4.7μF
10μF
22μF
0.80V～0.95V
1.00V～1.45V
1.50V～1.75V
1.80V～2.95V
3.00V～3.50V
3.55V～5.00V
×
47μF
47μF
47μF
47μF
47μF
×
47μF
22μF
6.8μF
4.7μF
10μF
22μF
22μF
10μF
6.8μF
4.7μF
6.8μF
× No option
<Current Limiter, Short-Circuit Protection>
The XC6220 series includes a fold-back circuit, which aids the operation of the current limiter and circuit protection. When
the load current reaches the current limit level, the fold-back circuit operates and output voltage drops. As a result of this drop
in output voltage, output current also decreases. When the output pin is shorted, a current of about 180mA flows.
<CE Pin>
The IC's internal circuitry can be shutdown via the signal from the CE pin with the XC6220 series. With the XC6220B/D
series, output at the VOUT pin will be pulled down to the VSS level. However, with XC6220A/B series, the CL auto-discharge
resistor is connected in parallel to R1 and R2 while the power supply is applied to the VIN pin. Therefore, the time until the
VOUT pin reaches the VSS level is shortened. The output voltage becomes unstable, when the CE pin is open. If this IC is
used with the correct output voltage for the CE pin, the logic is fixed and the IC will operate normally. However, with the
XC6220C/D series, supply current may increase as a result of through current in the IC's internal circuitry when medium
voltage is input.
9/30
XC6220 Series
■OPERATIONAL EXPLANATION (Continued)
<CL High Speed Auto-Discharge Function>
The XC6220B/D series can quickly discharge the electric charge at the output capacitor (CL), when a low signal to the CE
pin, which enables the whole IC circuit put into an OFF state, is inputted to the CE pin via the N-channel transistor located
between the VOUT pin and the VSS pin (cf. BLOCK DIAGRAM). The CL auto-discharge resistance value is fixed to 460Ω
(VIN=6.0V, VOUT=5.0V at TYP.). The discharge time of the output capacitor (CL) is set by the CL auto-discharge resistance
(RDCHG) and the output capacitor (CL). By setting a time constant of the CL auto-discharge resistance value [RDCHG] and an
output capacitor value (CL) as τ(τ=C x RDCHG), the output voltage after discharge via the N channel transistor is calculated
by the following formulas.
V = VOUT x e –t/τ,
or ｔ=τln（ VOUT(E) / V ）
where
V : Output voltage after discharge
VOUT(E) : Output voltage
t: Discharge time
τ: CL auto-discharge resistance RDCHG×Output capacitor (CL) value C)
For the XC6220A/C series, output voltage may rises when in the high stand-by mode. Please note that in that case, the
typical characteristics may worse. When the XC6220A/C series is used, please be noted the characteristics shown below.
Output V ol ta g e v s . Input V ol ta g e
0.7
1.8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0.0
0.6
VOUT (V)
VOUT (V)
XC6220A 501x x
0.5
0.4
0.3
0.2
0.1
0.0
20
40
60
Ta (℃)
80
100
1.0
2.0
3.0
4.0
5.0
6.0
VIN (V)
<Thermal Shutdown>
When the junction temperature of the built-in driver transistor reaches the temperature limit level (150℃ TYP.), the thermal
shutdown circuit operates and the driver transistor will be turned OFF. The IC resumes its operation when the thermal
shutdown function is released and the IC’s operation is automatically restored because the junction temperature drops to the
level of the thermal shutdown release voltage.
<Inrush Current Protection>
The XC6220 series includes an inrush current protection circuit.
The inrush current protection circuit suppresses inrush current charged to CL when the IC starts up to 700 mA (MAX.) for
approximately 1 ms.
* Please note that the device can not provide the output current beyond 700 mA for a period of approximately 1 ms after the
CE pin goes high.
■NOTES ON USE
1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be
exceeded.
2. Where wiring impedance is high, operations may become unstable due to noise and/or phase lag depending on output current.
Please strengthen VIN and VSS wiring in particular.
3. Please wire the input capacitor (CIN) and the output capacitor (CL) as close to the IC as possible.
10/30
XC6220
Series
■TEST CIRCUITS
Circuit 1: Output Voltage, Output Current, Dropout Voltage, Input/Operating Voltage, Line Regulation, Load Regulation,
・測定回路1
(出力電圧・出力電流・入出力電圧差・入力動作電圧・入力安定度・負荷安定度・制限電流・
Current
Limit, Short Current, CL Discharge Resistance
短絡電流・CL放電抵抗)
A
VOUT
VIN
CIN
CL
(ceramic)
V
(ceramic)
V
CE
VSS
SW1
SW2
IOUT
RL
Circuit
2: Supply Current,
Stand-by
・測定回路2(消費電流・
ｽﾀﾝﾊﾞ
ｲ電流)Current
A
VIN
A
VOUT
CIN
(ceramic)
CL
CE
(ceramic)
VSS
SW1
SW2
PS:0.1mA
HS:10mA
A
Circuit 3: Ripple Rejection Rate
・測定回路3(リップル除去率)
IOUT= 30mA
A
VOUT
VIN
CL
(ceramic)
V
CE
VSS
V
RL
11/30
XC6220 Series
■TEST CIRCUITS (Continued)
Circuit
4: CE “H”
“L”H”
Level
CE “H”
Current
・測定回路4
(CE”
L” Voltage,
レベル 電圧・
CE”“L”H”Level
L” レベル
電流)
VIN
A
CE
CIN
(ceramic)
VCE
VOUT
VSS
CL
(ceramic)
V
V
Circuit 5: HS Switching
Current, PS Switching Current, Switch Current Hysteresis Range, PS Switching Delay Time
・測定回路5
(HS切替電流、PS切替電流、切替ﾋｽﾃﾘｼｽ電流、PS切替遅延時間)
IOUT
A
VOUT
VIN
CE
CIN
(ceramic)
V
VSS
RL
CL
(ceramic)
A
12/30
ISS
XC6220
Series
■TYPICAL PERFORMANCE CHARACTERISTICS
(1) Output Voltage vs. Output Current
XC6220x 121
XC6220x 121
VIN=CE=2.2V, CIN=CL =22μF (ceramic)
1.4
1.2
1.2
Output Voltage: VOUT (V)
Output Voltage: VOUT (V)
CE=VIN, Topr=25℃, CIN=CL =22μF (ceramic)
1.4
1
0.8
0.6
0.4
VIN=1.6V
VIN=2.2V
0.2
1
0.8
0.6
0.4
Topr=25℃
Topr=-40℃
Topr=85℃
0.2
0
0
0
0.2
0.4
0.6
0.8
1
1.2
0
1.4
0.2
0.4
0.6
XC6220x 301
1.2
1.4
XC6220x 301
CE=VIN, Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
VIN=CE=4.0V, CIN=10μF, CL =4.7μF (ceramic)
3.5
3.5
3
3
Output Voltage: VOUT (V)
Output Voltage: VOUT (V)
1
Output Current: IOUT (A)
Output Current: IOUT (A)
2.5
2
1.5
1
VIN=3.1V
VIN=4.0V
0.5
2.5
2
1.5
1
Topr=25℃
Topr=-40℃
Topr=85℃
0.5
0
0
0
0.2
0.4
0.6
0.8
1
1.2
1.4
0
0.2
Output Current: IOUT (A)
0.4
0.6
1
1.2
1.4
XC6220x 501
CE=VIN, Topr=25℃, CIN=CL =10μF (ceramic)
6
0.8
Output Current: IOUT (A)
XC6220x 501
VIN=CE=6.0V, CIN=CL =10μF (ceramic)
6
5
5
Output Voltage: VOUT （V)
Output Voltage: VOUT (V)
0.8
4
3
2
VIN=5.1V
VIN=6.0V
1
4
3
2
Topr=25℃
Topr=-40℃
Topr=85℃
1
0
0
0
0.2
0.4
0.6
0.8
1
Output Current: IOUT (A)
1.2
1.4
0
0.2
0.4
0.6
0.8
1
1.2
1.4
Output Current: IOUT (A)
13/30
XC6220 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Voltage
XC6220x 121
XC6220x 301
CE=VIN, Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
3.5
1.2
3
Output Voltage: VOUT (V)
Output Voltage: VOUT (V)
CE=VIN, Topr=25℃, CIN=CL =22μF (ceramic)
1.4
1
0.8
0.6
0.4
IOUT=0.1mA
IOUT=30mA
IOUT=100mA
0.2
2.5
2
1.5
1
IOUT=0.1mA
IOUT=30mA
IOUT=100mA
0.5
0
0
0
1
2
3
4
5
6
0
1
2
Input Voltage: VIN (V)
3
4
5
6
Input Voltage: VIN (V)
XC6220x 501
CE=VIN, Topr=25℃, CIN=CL =10μF (ceramic)
6
Output Voltage: VOUT (V)
5
4
3
2
IOUT=0.1mA
IOUT=30mA
IOUT=100mA
1
0
0
1
2
3
4
5
6
Input Voltage: VIN (V)
(3) Dropout Voltage vs. Output Current
XC6220x 121
XC6220x 301
CE=VIN, Topr=25℃, CIN=CL =22μF (ceramic)
CE=VIN, Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
600
Topr=25℃
Topr=-40℃
Topr=85℃
500
400
Dropout Voltage: Vdif (mV)
Dropout Voltage: Vdif (mV)
600
300
200
100
0
400
300
200
100
0
0
200
400
600
Output Current: IOUT (mA)
14/30
Topr=25℃
Topr=-40℃
Topr=85℃
500
800
1000
0
200
400
600
800
Output Current: IOUT (mA)
1000
XC6220
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3) Dropout Voltage vs. Output Current
X C6 2 2 0 x5 0 1
CE=VIN, Topr=25℃, CIN=CL =10μF (ceramic)
Dropout Voltage: Vdif (mV)
600
500
Topr=25℃
Topr=-40℃
Topr=85℃
400
300
200
100
0
0
200
400
600
800
1000
Output Current: IOUT (mA)
(4) Output Voltage vs. Ambient Temperature
XC6220x 121
VIN=CE=4.0V, IOUT=30mA,
CIN=10μF, CL =4.7μF (ceramic)
3.06
1.212
Output Voltage: VOUT (V)
Output Voltage: VOUT (V)
1.224
1.2
1.188
1.176
-50
XC6220x 301
VIN=CE=2.2V, IOUT=30mA,
CIN=CL =22μF (ceramic)
-25
0
25
50
75
100
Ambient Temperature: Tpor (℃)
3.03
3
2.97
2.94
-50
-25
0
25
50
75
100
Ambient Temperature: Tpor (℃)
XC6220x 501
VIN=CE=6.0V, IOUT=30mA,
CIN=CL =10μF (ceramic)
Output Voltage: VOUT (V)
5.1
5.05
5
4.95
4.9
-50
-25
0
25
50
75
100
Ambient Temperature: Tpor (℃)
15/30
XC6220 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5) Supply Current vs. Input Voltage
XC6220B 121
XC6220x 121
CE=VIN, IOUT=0.1mA
CIN=CL =22μF (ceramic)
90
Topr=25℃
Topr=-40℃
Topr=85℃
70
90
80
Supply Current: ISS （μA）
Supply Current: ISS (μA)
80
CE=VIN, IOUT=10mA
CIN=CL =22μF (ceramic)
60
50
40
30
20
10
70
60
50
40
30
20
Topr=25℃
Topr=-40℃
Topr=85℃
10
0
0
0
1
2
3
4
5
6
0
1
2
Input Voltage: VIN (V)
3
4
XC6220x 301
90
Topr=25℃
Topr=-40℃
Topr=85℃
80
Supply Current: ISS (μA)
Supply Current: ISS (μA)
CE=VIN, IOUT=10mA
CIN=10μF, CL =4.7μF (ceramic)
90
Topr=25℃
Topr=-40℃
Topr=85℃
70
60
50
40
30
20
10
70
60
50
40
30
20
10
0
0
0
1
2
3
4
5
6
0
1
2
Input Voltage: VIN (V)
6
CE=VIN, IOUT=10mA
CIN=CL =10μF (ceramic)
Topr=25℃
Topr=-40℃
Topr=85℃
80
Topr=25℃
Topr=-40℃
Topr=85℃
Supply Current: ISS (μA)
Supply Current: ISS (μA)
5
90
90
70
4
XC6220x 501
CE=VIN, IOUT=0.1mA
CIN=CL =10μF (ceramic)
80
3
Input Voltage: VIN (V)
XC6220x 501
60
50
40
30
20
10
70
60
50
40
30
20
10
0
0
0
1
2
3
4
Input Voltage: VIN (V)
16/30
6
XC6220x 301
CE=VIN, IOUT=0.1mA
CIN=10μF, CL =4.7μF (ceramic)
80
5
Input Voltage: VIN （V)
5
6
0
1
2
3
4
Input Voltage: VIN (V)
5
6
XC6220
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(6) PS Switching Delay Time vs. Ambient Temperature
XC6220x 121
XC6220x 301
VIN=CE=2.2V, IOUT=10mA→0.1mA
1600
1400
1400
1200
1200
1000
1000
800
600
800
600
400
400
200
200
0
-50
-25
0
25
50
75
CIN=10μF, CL =4.7μF (ceramic)
1600
TDPS (μs)
TDPS (μs)
VIN=CE=4.0V, IOUT=10mA→0.1mA
CIN=CL =22μF (ceramic)
0
-50
100
-25
Ambient Temperature: Tpor (℃)
0
25
50
75
100
Ambient Temperature: Tpor (℃)
XC6220x 501
VIN=CE=6.0V, IOUT=10mA→0.1mA
CIN=CL =10μF (ceramic)
1600
1400
TDPS (μs)
1200
1000
800
600
400
200
0
-50
-25
0
25
50
75
100
Ambient Temperature: Tpor (℃)
(8) PS/HS Switch Current vs. Ambient Temperature
(7) CL Discharge Resistance vs. Ambient Temperature
XC6220B /D
XC6220x 301
VIN=6.0V, CE=VSS, VOUT=5.0V
CIN=10μF, CL =4.7μF (ceramic)
700
VIN=CE=4.0V, CIN=10μF, CL =4.7μF (ceramic)
10
9
Input Current: IOUT (mA)
Rdischg (Ω)
600
500
400
300
HS Switching Current
8
PS Switching Current
7
6
5
4
3
2
1
200
-50
-25
0
25
50
75
Ambient Temperature: Tpor (℃)
100
0
-50
-25
0
25
50
75
100
Ambient Temperature: Tpor (℃)
17/30
XC6220 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9) Load Transient Response
XC6220x 121
XC6220x 121
VIN=CE=2.2V, Tr=Tf=5μs
VIN=CE=2.2V, Tr=Tf=5μs
Topr=25℃, CIN=CL =22μF (ceramic)
CH1
Topr=25℃, CIN=CL =22μF (ceramic)
CH1
Output Voltage
Output Voltage
300mA
300mA
Output Current
Output Current
CH2
0.1mA
CH2
10mA
200μs/div
CH1：100mV/div CH2：100mA/div
200μs/div
CH1：100mV/div CH2：100mA/div
XC6220x 301
XC6220x 301
VIN=CE=4.0V, Tr=Tf=5μs
Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
CH1
VIN=CE=4.0V, Tr=Tf=5μs
Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
CH1
Output Voltage
Output Voltage
300mA
CH2
300mA
Output Current
Output Current
0.1mA
CH2
10mA
200μs/div
CH1：100mV/div CH2：100mA/div
200μs/div
CH1：100mV/div CH2：100mA/div
XC6220x 501
XC6220x 501
VIN=CE=6.0V, Tr=Tf=5μs
Topr=25℃, CIN=CL =10μF (ceramic)
VIN=CE=6.0V, Tr=Tf=5μs
Topr=25℃, CIN=10μF (ceramic)
CH1
CH1
Output Voltage
Output Voltage
300mA
300mA
Output Current
CH2 0.1mA
CH2
200μs/div
CH1：100mV/div CH2：100mA/div
18/30
Output Current
10mA
200μs/div
CH1：100mV/div CH2：100mA/div
XC6220
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Line Transient Response
XC6220x 301
XC6220x 121
CE=VIN, Tr=Tf=5μs, IOUT=100mA
Topr=25℃, CIN=CL =22μF (ceramic)
CE=VIN, Tr=Tf=5μs, IOUT=100mA
Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
3.2V
CH1
5.0V
Input Voltage
2.2V
CH1
Input Voltage
4.0V
CH2
CH2
Output Voltage
Output Voltage
100μs/div
CH1：1V/div CH2：20mV/div
100μs/div
CH1：1V/div CH2：20mV/div
XC6220x 501
CE=VIN, Tr=Tf=5μs, IOUT=100mA
Topr=25℃, CIN=CL =22μF (ceramic)
6.0V
CH1
Input Voltage
5.5V
CH2
Output Voltage
100μs/div
CH1：500mV/div CH2：20mV/div
(11) Input Rise Characteristics
XC6220x 121
XC6220x 121
CE=VIN, Tr=5μs, IOUT=0.1mA
Topr=25℃, CL =22μF (ceramic)
CE=VIN, Tr=5μs, IOUT=300mA
Topr=25℃, CL =22μF (ceramic)
2.2V
2.2V
Input Voltage
CH1
0V
Input Voltage
CH1
Output Voltage
CH2
0V
Output Voltage
CH2
200μs/div
CH1：1V/div CH2：500mV/div
200μs/div
CH1：1V/div CH2：500mV/div
19/30
XC6220 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(11) Input Rise Characteristics
XC6220x 301
XC6220x 301
CE=VIN, Tr=5μs, IOUT=0.1mA
Topr=25℃, CL =4.7μF (ceramic)
CE=VIN, Tr=5μs, IOUT=300mA
Topr=25℃, CL =4.7μF (ceramic)
4.0V
4.0V
Input Voltage
CH1
Input Voltage
0V
CH1
0V
Output Voltage
CH2
Output Voltage
CH2
200μs/div
CH1：2V/div CH2：2V/div
200μs/div
CH1：2V/div CH2：2V/div
XC6220x 501
XC6220x 501
CE=VIN, Tr=5μs, IOUT=0.1mA
Topr=25℃, CL =22μF (ceramic)
CE=VIN, Tr=5μs, IOUT=300mA
Topr=25℃, CL =22μF (ceramic)
6.0V
6.0V
Input Voltage
CH1
0V
Input Voltage
CH1
Output Voltage
CH2
0V
Output Voltage
CH2
200μs/div
CH1：2V/div CH2：2V/div
200μs/div
CH1：2V/div CH2：2V/div
(12) CE Rise Characteristics
XC6220x 121
XC6220x 121
VIN=2.2V, Tr=5μs, IOUT=300mA
Topr=25℃, CIN=CL =22μF (ceramic)
VIN=2.2V, Tr=5μs, IOUT=0.1mA
Topr=25℃, CIN=CL =22μF (ceramic)
CE Voltage
CE Voltage
CH1
CH1
Output Voltage
Output Voltage
CH2
CH2
100μs/div
CH1：500mV/div CH2：500mV/div
20/30
100μs/div
CH1：500mV/div CH2：500mV/div
XC6220
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(12) CE Rise Characteristics
XC6220x 301
XC6220x 301
VIN=4.0V, Tr=5μs, IOUT=0.1mA
Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
VIN=4.0V, Tr=5μs, IOUT=300mA
Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
CE Voltage
CE Voltage
CH1
CH1
Output Voltage
Output Voltage
CH2
CH2
100μs/div
CH1：500mV/div CH2：1V/div
100μs/div
CH1：500mV/div CH2：1V/div
XC6220x 501
XC6220x 501
VIN=6.0V, Tr=5μs, IOUT=0.1mA
VIN=6.0V, Tr=5μs, IOUT=300mA
Topr=25℃, CIN=CL =10μF (ceramic)
Topr=25℃, CIN=CL =10μF (ceramic)
CE Voltage
CE Voltage
CH1
CH1
Output Voltage
Output Voltage
CH2
CH2
100μs/div
CH1：500mV/div CH2：2V/div
100μs/div
CH1：500mV/div CH2：2V/div
(13) Inrush Current
XC6220x 301
XC6220x 121
VIN=4.0V, Tr=5μs
Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
VIN=2.2V, Tr=5μs
Topr=25℃, CIN=CL =22μF (ceramic)
CE Voltage
CE Voltage
Output Voltage
CH1
CH2
CH3
Output Voltage
Inrush Current
100μs/div
CH1：500mV/div CH2：1V/div CH3：100mA/div
CH1
CH2
Inrush Current
CH3
100μs/div
CH1：500mV/div CH2：1V/div CH3：100mA/div
21/30
XC6220 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(13) Inrush Current
XC6220x 501
VIN=6.0V, Tr=5μs
Topr=25℃, CIN=CL =10μF (ceramic)
CE Voltage
Output Voltage
CH1
CH2
Inrush Current
CH3
100μs/div
CH1：500mV/div CH2：1V/div CH3：100mA/div
(14) CL Discharge Time
XC6220x 301 ( A /C)
XC6220x 301 ( B /D)
VIN=4.0V, Tf=5μs, IOUT=0.1mA
VIN=4.0V, Tf=5μs, IOUT=0.1mA
Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
Topr=25℃, CIN=10μF, CL =4.7μF (ceramic)
CH1
CH1
CE Voltage
CE Voltage
CH2
CH2
Output Voltage
Output Voltage
2.0ms/div
CH1：500mV/div CH2：2V/div
200ms/div
CH1：500mV/div CH2：2V/div
(15) Ripple Rejection Rate
X C6 2 2 0 x1 2 1 (P o we r S ave mo de )
XC6220x 121 ( H i g hSpeed mode)
VIN=CE=2.2VDC+0.5Vp-pAC, IOUT=30mA
Topr=25℃, CIN=0.1μF, CL =22μF (ceramic)
70
60
50
40
30
20
10
0
0.01
0.1
1
10
Ripple Frequency: f (kHz)
22/30
80
Ripple Rejection Ratio: RR (dB)
Ripple Rejection Ratio: RR (dB)
80
100
1000
VIN=CE=2.2VDC+0.5Vp-pAC, IOUT=0.1mA
Topr=25℃, CIN=0.1μF, CL =22μF (ceramic)
70
60
50
40
30
20
10
0
0.01
0.1
1
10
Ripp;e Frequency: f (kHz)
100
1000
XC6220
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(15) Ripple Rejection Rate
XC6220x 301 ( PowerSa v e mode)
XC6220x 301 ( H i g hSpeed mode)
VIN=CE=4.0VDC+0.5Vp-pAC, IOUT=30mA
Topr=25℃, CIN=0.1μF, CL =4.7μF (ceramic)
70
80
Ripple Rejection Ratio: RR (dB)
Ripple Rejection Ratio: RR (dB)
80
60
50
40
30
20
10
0
0.01
0.1
1
10
100
VIN=CE=4.0VDC+0.5Vp-pAC, IOUT=0.1mA
Topr=25℃, CIN=0.1μF, CL =4.7μF (ceramic)
70
60
50
40
30
20
10
0
0.01
1000
0.1
XC6220x501
XC6220c501 ((HighSpeed
H i g hSpeed mode)
mode)
60
50
40
30
20
10
0.1
1
10
Ripple Frequency: f (kHz)
100
1000
100
1000
VIN=CE=5.5.0VDC+0.5Vp-pAC, IOUT=0.1mA
Topr=25℃, CIN=0.1μF, CL =10μF (ceramic)
80
Ripple Rejection Ratio: RR (dB)
Ripple Rejection Ratio: RR (dB)
70
0
0.01
10
XC6220x 501 ( PowerSa v e mode)
VIN=CE=5.5.0VDC+0.5Vp-pAC, IOUT=30mA
Topr=25℃, CIN=0.1μF, CL =10μF (ceramic)
80
1
Ripple Frequency: f (kHz)
Ripple Frequency: f (kHz)
70
60
50
40
30
20
10
0
0.01
0.1
1
10
100
1000
Ripple Frequency: f (kHz)
23/30
XC6220 Series
■PACKAGING INFORMATION
●USP-6C
●SOT-25
●SOT-89-5
4.5±0.1
+0.15
1.6
-0.2
0.42±0.06
0.42±0.06
0.42±0.06
2
5
0.4
+0.03
-0.02
0.4
+0.03
-0.02
4
Φ1.0
1
0.42±0.06
2
3
0.47±0.06
8°
8°
1.5±0.1
24/30
0.42±0.06
1.5±0.1
XC6220
Series
■PACKAGING INFORMATION (Continued)
●USP-6C Reference Pattern Layout
●USP-6C Reference Metal Mask Design
2.4
6
2
5
0.25
3
4
0.5
0.05
1.8
1
0.25
0.25
0.45
0.5
0.225
0.45
0.05
1.0
25/30
XC6220 Series
■PACKAGING INFORMATION (Continued)
●
SOT-25 Power Dissipation
Power dissipation data for the SOT-25 is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
1.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
(Board of SOT-26 is used.)
Material:
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole: 4 x 0.8 Diameter
2.
Power Dissipation vs. Operating temperature
Evaluation Board (Unit: mm)
評価基板レイアウト（単位：mm）
Board Mount (Tj max = 125℃)
Ambient Temperature（℃）
Power Dissipation Pd（mW）
25
600
85
240
Thermal Resistance (℃/W)
166.67
許容損失Pd（mW）
Power Dissipation Pd (mW)
Pd-Ta特性グラフ
Pd vs. Ta
700
600
500
400
300
200
100
0
25
26/30
45
65
85
Ambient
Temperature Ta (℃)
周辺温度Ta（℃）
105
125
XC6220
Series
■PACKAGING INFORMATION (Continued)
●
SOT-89-5 Power Dissipation
Power dissipation data for the SOT-89-5 is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
2.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
て
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
Material:
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole: 5 x 0.8 Diameter
Power Dissipation vs. Operating temperature
Evaluation Board (Unit: mm)
Board Mount (Tj max = 125℃)
Ambient Temperature（℃）
Power Dissipation Pd（mW）
25
1300
85
520
Thermal Resistance (℃/W)
76.92
Pd-Ta特性グラフ
Pd vs. Ta
許容損失Pd（mW）
Power Dissipation Pd (mW)
2.
1400
1200
1000
800
600
400
200
0
25
45
65
85
Ambient
Temperature Ta (℃)
周辺温度Ta（℃）
105
125
27/30
XC6220 Series
■PACKAGING INFORMATION (Continued)
USP-6C Power Dissipation
●
Power dissipation data for the USP-6C is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described condition.
3.
Measurement Condition (Reference data)
Condition:
Mount on a board
Ambient:
Natural convection
Soldering:
Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm in one side)
2
Copper (Cu) traces occupy 50% of the board area
て
In top and back faces
Package heat-sink is tied to the copper traces
Material:
Glass Epoxy (FR-4)
Thickness:
1.6 mm
Through-hole: 4 x 0.8 Diameter
2.
Power Dissipation vs. Operating temperature
Evaluation Board (Unit: mm)
Board Mount (Tj max = 125℃)
Ambient Temperature（℃）
Power Dissipation Pd（mW）
25
1000
85
400
Thermal Resistance (℃/W)
100.00
許容損失Pd（mW）
Power Dissipation Pd (mW)
Pd-Ta特性グラフ
Pd vs. Ta
1200
1000
800
600
400
200
0
25
28/30
45
65
85
Ambient
Temperature Ta (℃)
周辺温度Ta（℃）
105
125
XC6220
Series
■MARKING RULE
●SOT-25, SOT-89-5
S 6C
SOT25
5
①
① represents product series
4
②
1
③
④
2
MARK
PRODUCT SERIES
H
XC6220******
② represents type of CE, voltage range, and accuracy
MARK
CE
OUTPUT VOLTAGE
RANGE
OUTPUT VOLTAGE
ACCURACY
0
A
0.8～2.9
1
1
A
0.8～2.9
B
2
A
3.0～5.0
1
3
A
3.0～4.9
B
4
B
0.8～2.9
1
5
B
0.8～2.9
B
6
B
3.0～5.0
1
7
B
3.0～4.9
B
8
C
0.8～2.9
1
9
C
0.8～2.9
B
A
C
3.0～5.0
1
6
B
C
3.0～4.9
B
5
C
D
0.8～2.9
1
D
D
0.8～2.9
B
E
D
3.0～5.0
1
F
D
3.0～4.9
B
⑤
3
PRODUCT SERIES
XC6220A081** ～
XC6220A291**
XC6220A08B** ～
XC6220A29B**
XC6220A301** ～
XC6220A501**
XC6220A30B** ～
XC6220A49B**
XC6220B081** ～
XC6220B291**
XC6220B08B** ～
XC6220B29B**
XC6220B301** ～
XC6220B501**
XC6220B30B** ～
XC6220B49B**
XC6220C081** ～
XC6220C291**
XC6220C08B** ～
XC6220C29B**
XC6220C301** ～
XC6220C501**
XC6220C30B** ～
XC6220C49B**
XC6220D081** ～
XC6220D291**
XC6220D08B** ～
XC6220D29B**
XC6220D301** ～
XC6220D501**
XC6220D30B** ～
XC6220D49B**
SOT89-5
⑤
①
④
4
③
2
②
5
1
2
3
USP6C
②
⑤
③
3
④
2
①
1
4
* Accuracy ”1”･･･0.1V increments, Accuracy ”B”･･･0.05V increments
③ represents output voltage
MARK
0
1
2
3
4
5
6
7
8
9
OUTPUT
VOLTAGE (V)
－
－
－
－
－
－
－
－
0.8x
0.9x
3.0x
3.1x
3.2x
3.3x
3.4x
3.5x
3.6x
3.7x
3.8x
3.9x
MARK
A
B
C
D
E
F
H
K
L
M
OUTPUT
VOLTAGE (V)
1.0x
1.1x
1.2x
1.3x
1.4x
1.5x
1.6x
1.7x
1.8x
1.9x
4.0x
4.1x
4.2x
4.3x
4.4x
4.5x
4.6x
4.7x
4.8x
4.9x
MARK
N
P
R
S
T
U
V
X
Y
Z
OUTPUT
VOLTAGE (V)
2.0x
2.1x
2.2x
2.3x
2.4x
2.5x
2.6x
2.7x
2.8x
2.9x
5.0x
－
－
－
－
－
－
－
－
－
④,⑤ represents production lot number
01～09、0A～0Z、11･･･9Z、A1～A9、AA･･･Z9、ZA～ZZ repeated
(G，I，J，O，Q，W excluded)
*No character inversion used.
29/30
XC6220 Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics.
Consult us, or our representatives
before use, to confirm that the information in this datasheet is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this datasheet.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this datasheet.
4. The products in this datasheet are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this datasheet within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this datasheet may be copied or reproduced without the
prior permission of TOREX SEMICONDUCTOR LTD.
30/30