TOREX XC6501B45ANL

XC6501
ETR0337-003
Output Capacitor-Less, Low Power Consumption, High Speed LDO Regulator
■GENERAL DESCRIPTION
The XC6501 series is a 6.0V high speed, low noise CMOS LDO regulator that can provide stable output voltages within a range
of 1.2V to 5.0V (0.05V increments) even without a load capacitor CL. This is possible because phase compensation is carried
out internally unlike other LDOs where it is done externally. The series consists of a reference voltage source, driver transistor,
error amplifier, current limit circuit, and phase compensation circuit.
The CE function enables the circuit to be put into stand-by mode by inputting a low level signal to the CE pin thereby reducing
current consumption from an already low 13μA (in operation) to less than 0.1μA. In the stand-by mode, if a CL cap is used, the
electric charge stored at CL can be discharged via the internal auto-discharge switch and as a result, the VOUT pin quickly returns
to the VSS level.
The current limit fold-back circuit operates as a short circuit protection and a current limiter function for the output pin.
■APPLICATIONS
■FEATURES
●Mobile phones (RF, Digital cash, I/O etc.)
Operating Voltage Range
:
●Portable games
Output Voltage Range
:
●Wireless LAN modules
Dropout Voltage
:
●LCD modules
Low Power Supply
:
13μA@VOUT=2.8V
●Bluetooth
Stand-by Current
:
Less than 0.1μA
●Digital-TV tuners
Ripple Rejection
:
50dB@f=1kHz,VOUT=2.8V
Protection Circuits
:
Current limit (300mA, TYP.)
:
Short circuit protection
:
Internal phase compensation
●Camera modules
Output capacitor is not required
1.4~6.0V
2.0~5.0V(Accuracy:±1%)
1.2~1.95V(Accuracy:±0.02V)
150mV@IOUT=100mA,
VOUT=2.8V
CL High Speed Auto Discharge
USP-3, USP-4
Packages
SSOT-24, SOT-25
■TYPICAL PERFORMANCE
CHARACTERISTICS
XC6501 Series
Ta=25℃,tr=tf=5μs
C IN=0.1μF (ceramic)
3.0
300
Without
CL無しCL
CL =1.0μF
250
2.8
200
2.6
150
2.4
2.2
100
Output Current
2.0
50
Output Current: I OUT (mA)
OUT
(V)
3.2
Output Voltage: V
■TYPICAL APPLICATION CIRCUIT
0
Time (40μs/div)
1/21
XC6501 Series
■PIN CONFIGURATION
*The heat dissipation pad of the USP-4 package is recommended to solder as the
recommended mount pattern and metal mask pattern for mounting strength. The mount
pattern should be electrically opened or connected to the VSS (No.2) pin.
■PIN ASSIGNMENT
PIN NUMBER
PIN NAME
FUNCTION
1
VIN
Power Supply
5
VOUT
Output
USP-3
USP-4
SSOT-24
SOT-25
1
4
4
2
1
3
3
2
2
2
VSS
Ground
-
3
1
3
CE
ON/OFFControl
-
-
-
4
NC
No Connection
■PRODUCT CLASSIFICATION
●Ordering Information
XC6501①②③④⑤⑥
DESIGNATOR
DESCRIPTION
①
Regulator Type
②③
Output Voltage
④
Output Voltage
Accuracy
SYMBOL
DESCRIPTION
A
B
C
D
P
12~50
: CE High Active, Without CE Pull-down, Without CL discharge
: CE High Active, Without CE Pull-down, With CL discharge
: CE High Active, With CE Pull-down, Without CL discharge
: CE High Active, With CE Pull-down, With CL discharge
: 3 pin, without CE pin (USP-3)
: ex.)28V → ②=2, ③=8
: 0.1V increments
Accuracy 1.2V~1.9V (±0.02V), 2.0~5.0V (±1%)
ex.)1.80V → ②=1, ③=8, ④=1
: 0.05V increments
Accuracy 1.25V~1.95V (±0.02V), 2.05~4.95V (±1%)
ex.)1.85V → ②=1, ③=8, ④=A
: USP-3 (Only XC6501P)
: USP-4
: SSOT-24
: SOT-25
: Embossed tape, standard feed
: Embossed tape, reverse feed
1
A
2/21
⑤
Packages
⑥
Device Orientation
H
G
N
M
R
L
XC6501
Series
■BLOCK DIAGRAMS
VIN
VOUT
VIN
VOUT
CFB
Current Limit
R1
+
Error
Amp
-
CE
ON/OFF
Control
each
circuit
CFB
R1
Current Limit
Rdischg
+
Error
Amp
-
R2
Voltage
Reference
CE
each
circuit
ON/OFF
Control
R2
Voltage
Reference
/CE
VSS
VSS
XC6501A Series
XC6501B Series
VIN
VOUT
VIN
VOUT
CFB
Current Limit
+
Error
Amp
CE
ON/OFF
Control
CFB
+
Error
Amp
-
R2
CE
Voltage
Reference
VSS
each
circuit
R1
Current Limit
R1
ON/OFF
Control
Voltage
Reference
Rdischg
R2
/CE
VSS
each
circuit
XC6501C Series
XC6501D Series
VIN
VOUT
CFB
Current Limit
R1
+
Error
Amp
-
R2
Voltage
Reference
VSS
*Diodes inside the circuit are an ESD protection diode and a parasitic diode.
*図のダイオードは、静電保護用のダイオードと寄生ダイオードです。
XC6501P Series
■ABSOLUTE MAXIMUM RATINGS
PARAMETER
Input Voltage
Output Current
Output Voltage
CE Input Voltage
USP-3
USP-4
Power Dissipation
SSOT-24
SOT-25
SYMBOL
VIN
IOUT
VOUT
VCE
Pd
RATINGS
VSS-0.3~+6.5
400 (*1)
VSS-0.3~VIN+0.3
VSS-0.3~+6.5
120
120
150
250
600 (PCB mounted)(*2)
-40~+85
-55~+125
UNITS
V
mA
V
V
mW
Operating Temperature Range
Topr
℃
Storage Temperature Range
Tstg
℃
*1: Pd>(VIN-VOUT)×IOUT
*2: The power dissipation figure shown is PCB mounted and is for reference only. Please refer to page 20 for details.
3/21
XC6501 Series
■ELECTRICAL CHARACTERISTICS
●XC6501 Series
Ta=25℃
PARAMETER
SYMBOL
Output Voltage
VOUT(E)
Maximum Output Current
Load Regulation
Dropout Voltage (*5)
Supply Current
Stand-by Current
(*2)
IOUTMAX
ΔVOUT
Vdif
IDD
Istby
2.0V>VOUT(T)(*3)
VCE=VIN, IOUT=10mA
-0.02
2.0V≦VOUT(T)
VCE=VIN, IOUT=10mA
×0.99
①
(*4)
0.20
%/V
①
1.4
-
6.0
V
①
-
±100
-
ppm/℃
①
-
50
-
dB
③
210
300
-
mA
①
-
25
-
mA
①
VCEH
1.0
-
6.0
V
①
VCEL
VSS
-
0.25
V
①
-0.1
3.5
6.0
0.1
10
μA
①
-0.1
-
0.1
μA
①
-
250
400
300
480
Ω
Ω
①
PSRR
Current Limit
ILIM
Short Circuit Current
ISHORT
VCE=VIN, IOUT=30mA
-40℃≦Ta≦85℃
VOUT(T)≦4.75V
VIN={VOUT(T)+1.0}VDC+0.5Vp-pAC
VCE=VIN, IOUT=30mA, f=1kHz
VOUT(T)≧4.80V
VIN=5.75VDC+0.5Vp-pAC
VCE=VIN, IOUT=30mA, f=1kHz
VCE=VIN
VCE=VIN, VOUT is short-circuited at the
VSS level
ICEH
VIN=VCE=6.0V
ICEL
VCE=VSS
RDCHG
XC6501A/B/P
XC6501C/D
VIN=6.0V, VOUT=1.2V, VCE=VSS
VIN=6.0V, VOUT=5.0V, VCE=VSS
Notes:
(*3)
*1: Unless otherwise stated regarding input voltage conditions, VIN=VOUT(T) +1.0V.
*2: VOUT(E): An actual output voltage when an amply stabilized IOUT (VOUT(T)+1.0V) is input..
*3: VOUT(T): Nominal output voltage value
*4: VOUT(E): Effective output voltage value
*5: Vdif={VIN1 – VOUT1 }
*6: VOUT1: A voltage equal to 98% of the output voltage when an amply stabilized IOUT (VOUT(T)+1.0V) is input.
*7: VIN1: The input voltage when VOUT1 appears as input voltage is gradually decreased.
*8: This function is built in the XC6501B/D series only.
The XC6501A/C series discharges by resistors R1+ R2 only as shown in the block diagrams.
4/21
①
0.10
ΔTa・VOUT
(*6)
V
-
Ripple Rejection
Rate
(*7)
×1.01
0.1
ΔVOUT
CE High Level
Voltage
CE Low Level
Voltage
CE High Level
Current
CE Low Level
Current
CL Auto-Discharge
Resistance (*8)
CIRCUIT
-
VOUT(T)+0.5V≦VIN≦6.0V,
VCE=VIN, IOUT=30mA
200
-
UNITS
(*4)
VOUT(T)
(*4)
VCE=VIN
VCE=VIN, 0.1mA≦IOUT≦100mA
VCE=VIN , IOUT=100mA
VIN=VCE=6.0V, IOUT=0mA
VIN=6.0V, VCE=VSS
MAX.
+0.02
(*4)
VIN
Output Voltage
Temperature
Characteristics
TYP.
mA
mV
mV
μA
μA
ΔVIN・VOUT
Input Voltage
MIN.
15
E-1
E-2
0.01
ΔVOUT
Line Regulation
CONDITIONS
45
①
①
②
②
XC6501
Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Chart
NOMINAL
VOLTAGE
(V)
VOUT(T)
1.20
1.25
1.30
1.35
1.40
1.45
1.50
1.55
1.60
1.65
1.70
1.75
1.80
1.85
1.90
1.95
2.00
2.05
2.10
2.15
2.20
2.25
2.30
2.35
2.40
2.45
2.50
2.55
2.60
2.65
2.70
2.75
2.80
2.85
2.90
2.95
E-0
OUTPUT
VOLTAGE
(V)
E-1
DROPOUT
VOLTAGE
(mV)
E-2
SUPPLY
CURRENT
(μA)
VOUT(E)
Vdif
ISS
MIN.
MAX.
1.1800
1.2300
1.2800
1.3300
1.3800
1.4300
1.4800
1.5300
1.5800
1.6300
1.6800
1.7300
1.7800
1.8300
1.8800
1.9300
1.9800
2.0295
2.0790
2.1285
2.1780
2.2275
2.2770
2.3265
2.3760
2.4255
2.4750
2.5245
2.5740
2.6235
2.6730
2.7225
2.7720
2.8215
2.8710
2.9205
1.2200
1.2700
1.3200
1.3700
1.4200
1.4700
1.5200
1.5700
1.6200
1.6700
1.7200
1.7700
1.8200
1.8700
1.9200
1.9700
2.0200
2.0705
2.1210
2.1715
2.2220
2.2725
2.3230
2.3735
2.4240
2.4745
2.5250
2.5755
2.6260
2.6765
2.7270
2.7775
2.8280
2.8785
2.9290
2.9795
TYP.
MAX.
440
690
300
610
260
530
230
470
TYP.
MAX.
11
17
18
200
430
190
410
12
19
210
380
13
20
150
360
5/21
XC6501 Series
■ELECTRICAL CHARACTERISTICS (Continued)
●Voltage Table (continued)
NOMINAL
VOLTAGE
(V)
VOUT(T)
3.00
3.05
3.10
3.15
3.20
3.25
3.30
3.35
3.40
3.45
3.50
3.55
3.60
3.65
3.70
3.75
3.80
3.85
3.90
3.95
4.00
4.05
4.10
4.15
4.20
4.25
4.30
4.35
4.40
4.45
4.50
4.55
4.60
4.65
4.70
4.75
4.80
4.85
4.90
4.95
5.00
6/21
E-0
OUTPUT
VOLTAGE
(V)
E-1
DROPOUT
VOLTAGE
(mV)
VOUT(E)
MIN.
MAX.
2.9700
3.0195
3.0690
3.1185
3.1680
3.2175
3.2670
3.3165
3.3660
3.4155
3.4650
3.5145
3.5640
3.6135
3.6630
3.7125
3.7620
3.8115
3.8610
3.9105
3.9600
4.0095
4.0590
4.1085
4.1580
4.2075
4.2570
4.3065
4.3560
4.4055
4.4550
4.5045
4.5540
4.6035
4.6530
4.7025
4.7520
4.8015
4.8510
4.9005
4.9500
3.0300
3.0805
3.1310
3.1815
3.2320
3.2825
3.3330
3.3835
3.4340
3.4845
3.5350
3.5855
3.6360
3.6865
3.7370
3.7875
3.8380
3.8885
3.9390
3.9895
4.0400
4.0905
4.1410
4.1915
4.2420
4.2925
4.3430
4.3935
4.4440
4.4945
4.5450
4.5955
4.6460
4.6965
4.7470
4.7975
4.8480
4.8985
4.9490
4.9995
5.0500
E-2
SUPPLY
CURRENT
(μA)
Vdif
ISS
TYP.
MAX.
150
360
TYP.
MAX.
20
14
140
350
21
130
340
15
22
120
330
16
23
XC6501
Series
■OPERATIONAL EXPLANATION
The voltage divided by resistors R1 & R2 is compared with the internal reference voltage by the error amplifier. The P-channel
MOSFET which is connected to the VOUT pin is then driven by the subsequent output signal. The output voltage at the VOUT pin
is controlled & stabilized by a system of negative feedback. The current limit circuit and short protect circuit operate in relation
to the level of output current. Further, the IC's internal circuitry can be shutdown via the CE pin's signal.
<CL High Speed Auto-Discharge Function>
The XC6501B/D series can discharge the electric charge in the output capacitor CL, when a low signal to the CE pin, which
enables a whole IC circuit turn off, is inputted via the N-channel transistor located between the VOUT pin and the VSS pin as
shown in the BLOCK DIAGRAM. The CL auto-discharge resistance value is set at 400Ω(VOUT=5.0V @ VIN=6.0V at typical).
The discharge time of the output capacitor CL is set by the CL auto-discharge resistance R and the output capacitor CL. By
setting time constant of a CL auto-discharge resistance value Rdischg and an output capacitor value CL as τ (τ=C x
Rdischg), the output voltage after discharge via the N-channel transistor is calculated by the following formulas.
V = VOUT(E) x e –t/τ, or t=τx In (VOUT(E) / V )
where V : Output voltage after discharge, VOUT(E) : Output voltage, t : Discharge time,
τ: CL auto-discharge resistance Rdischg x Output capacitor CL
<Current Limiter, Short-Circuit Protection>
The XC6501 series’ fold-back circuit operates as an output current limiter and a short protection of the output pin. When the
load current reaches the current limit level, the fixed current limiter circuit operates and output voltage drops. When the
output voltage is shorted to the VSS, its current flow reached and minimized to about 25mA.
<CE Pin>
The IC's internal circuitry can be shutdown via the signal from the CE pin with the XC6501 series. In shutdown mode output at
the VOUT pin will be pulled down to the VSS level via R1 & R2. However, as for the XC6501B/D series, the CL auto-discharge
resistor is connected in parallel to R1 and R2 while the power supply is applied to the VIN pin. Therefore, time until the VOUT pin
reaches the VSS level becomes short. The output voltage becomes unstable, when the CE pin is open. If this IC is used with
the correct output voltage for the CE pin, the logic is fixed and the IC will operate normally. However, supply current may
increase as a result of through current in the IC's internal circuitry when medium voltage is input.
■NOTES ON USE
1. Please use this IC within the stated absolute maximum ratings. The IC is liable to malfunction should the ratings be
exceeded.
2. This IC achieves stable operation without an output capacitor CL by internal phase compensation. However, wiring
impedance is high, operations may become unstable due to noise and/or phase lag depending on output current.
Please wire the input capacitor CIN and the output capacitor CL as close to the IC as possible.
7/21
XC6501 Series
■TEST CIRCUITS
●Circuit ①
●測定回路①
CIN=0.1μF
(ceramic)
VIN
V
A
CE
V
IOUT
VOUT
VSS
A
V
●測定回路②
●Circuit ②
A
VIN
V
CE
VOUT
VSS
●Circuit ③
●測定回路③
VIN
V
CE
VOUT
VSS
8/21
IOUT
A
V
XC6501
Series
■TYPICAL PERFORMANCE CHARACTERISTICS
*CE Voltage condition: Unless otherwise stated, VCE =VIN
(1) Output Voltage vs. Output Current
XC6501x121
1.2
0.9
0.6
Ta = -40℃
0.3
Ta = 25℃
Ta = 25℃
CIN = 0.1μF (ceramic)
1.5
Output Voltage: VOUT [V]
1.5
Output Voltage: VOUT [V]
XC6501x121
VIN = 2.2V
CIN = 0.1μF (ceramic)
1.2
0.9
0.6
VIN = 1.5V
0.3
VIN = 1.7V
Ta = 85℃
0.0
VIN = 2.2V
0.0
0
50
100 150 200 250 300 350 400
Output Current: IOUT [mA]
0
50
XC6501x281
2.5
2.0
1.5
1.0
Ta = -40℃
Ta = 25℃
0.5
Ta = 25℃
CIN = 0.1μF (ceramic)
3.0
Output Voltage: VOUT [V]
Output Voltage: VOUT [V]
XC6501x281
VIN = 3.8V
CIN = 0.1μF (ceramic)
3.0
100 150 200 250 300 350 400
Output Current: IOUT [mA]
2.5
2.0
1.5
1.0
VIN = 3.1V
0.5
VIN = 3.3V
Ta = 85℃
0.0
VIN = 3.8V
0.0
0
50
100 150 200 250 300 350 400
Output Current: IOUT [mA]
0
50
XC6501x501
5.0
4.0
3.0
2.0
Ta = -40℃
Ta = 25℃
1.0
Ta = 85℃
0.0
Ta = 25℃
CIN = 0.1μF (ceramic)
6.0
Output Voltage: VOUT [V]
Output Voltage: VOUT [V]
XC6501x501
VIN = 6.0V
CIN = 0.1μF (ceramic)
6.0
100 150 200 250 300 350 400
Output Current: IOUT [mA]
5.0
4.0
3.0
2.0
VIN = 5.3V
VIN = 5.5V
1.0
VIN = 6.0V
0.0
0
50
100 150 200 250 300 350 400
Output Current: IOUT [mA]
0
50
100 150 200 250 300 350 400
Output Current: IOUT [mA]
9/21
XC6501 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(2) Output Voltage vs. Input Voltage
XC6501x121
1.2
1.0
0.8
IOUT = 10mA
IOUT = 30mA
0.6
IOUT = 100mA
Ta = 25℃
CIN = 0.1μF (ceramic)
1.26
Output Voltage: VOUT [V]
1.4
Output Voltage: VOUT [V]
XC6501x121
Ta = 25℃
CIN = 0.1μF (ceramic)
0.4
1.24
1.22
1.20
1.18
IOUT = 10mA
IOUT = 30mA
1.16
IOUT = 100mA
1.14
0.5
1.0
1.5
2.0
Input Voltage: VIN [V]
2.5
2.0
XC6501x281
2.6
2.4
IOUT = 10mA
IOUT = 30mA
IOUT = 100mA
Ta = 25℃
CIN = 0.1μF (ceramic)
2.86
Output Voltage: VOUT [V]
Output Voltage: VOUT [V]
2.8
2.2
2.0
2.84
2.82
2.80
2.78
IOUT = 10mA
IOUT = 30mA
2.76
IOUT = 100mA
2.74
2.0
2.5
3.0
3.5
Input Voltage: VIN [V]
4.0
3.2
XC6501x501
6.0
4.8
4.6
IOUT = 10mA
IOUT = 30mA
IOUT = 100mA
4.2
Ta = 25℃
CIN = 0.1μF (ceramic)
5.06
Output Voltage: VOUT [V]
Output Voltage: VOUT [V]
5.0
4.4
3.9
4.6
5.3
Input Voltage: VIN [V]
XC6501x501
Ta = 25℃
CIN = 0.1μF (ceramic)
5.2
5.04
5.02
5.00
4.98
IOUT = 10mA
IOUT = 30mA
4.96
IOUT = 100mA
4.94
4.0
10/21
6.0
XC6501x281
Ta = 25℃
CIN = 0.1μF (ceramic)
3.0
3.0
4.0
5.0
Input Voltage: VIN [V]
4.5
5.0
5.5
Input Voltage: VIN [V]
6.0
5.2
5.4
5.6
5.8
Input Voltage: VIN [V]
6.0
XC6501
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(3) Dropout Voltage vs. Output Current
XC6501x121
CIN = 0.1μF (ceramic)
Ta = -40℃
0.8
Ta = 25℃
Ta = 85℃
0.6
0.4
0.2
※Below the minimum operating voltage
CIN = 0.1μF (ceramic)
0.5
Dropout Voltage: Vdif [V]
1.0
Dropout Voltage: Vdif [V]
XC6501x281
0.0
Ta = -40℃
0.4
Ta = 25℃
Ta = 85℃
0.3
0.2
0.1
0.0
0
50
100
150
Output Current: IOUT [mA]
200
0
50
100
150
Output Current: IOUT [mA]
200
(4) Supply Current vs. Input Voltage
XC6501x501
CIN = 0.1μF (ceramic)
0.5
Ta = -40℃
0.4
Ta = 25℃
Ta = 85℃
0.3
16.0
Supply Current: ISS [μA]
Dropout Voltage: Vdif [V]
XC6501x121
0.2
0.1
0.0
12.0
8.0
Ta = -40℃
4.0
Ta = 25℃
Ta = 85℃
0.0
0
50
100
150
Output Current: IOUT [mA]
0
200
1
XC6501x281
5
6
XC6501x501
20.0
Supply Current: ISS [μA]
16.0
Supply Current: ISS [μA]
2
3
4
Input Voltage: VIN [V]
12.0
8.0
Ta = -40℃
4.0
Ta = 25℃
Ta = 85℃
0.0
15.0
10.0
Ta = -40℃
5.0
Ta = 25℃
Ta = 85℃
0.0
0
1
2
3
4
Input Voltage: VIN [V]
5
6
0
1
2
3
4
Input Voltage: VIN [V]
5
6
11/21
XC6501 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(5) Output Voltage vs. Ambient Temperature
XC6501x121
XC6501x281
VIN = 2.2V
CIN = 0.1μF (ceramic)
1.24
VIN = 3.8V
CIN = 0.1μF (ceramic)
2.90
IOUT = 10mA
Output Voltage: VOUT [V]
Output Voltage: VOUT [V]
IOUT = 10mA
IOUT = 30mA
1.22
IOUT = 100mA
1.20
1.18
1.16
IOUT = 30mA
2.85
IOUT = 100mA
2.80
2.75
2.70
-50
-25
0
25
50
75
Ambient Temperature: Ta [℃]
100
-50
-25
0
25
50
75
Ambient Temperature: Ta [℃]
100
(6) Supply Current vs. Ambient Temperature
XC6501x501
XC6501
VIN = 6.0V
CIN = 0.1μF (ceramic)
5.10
VIN = VOUT + 1.0V
20.0
Supply Current: ISS [μA]
Output Voltage: VOUT [V]
IOUT = 10mA
IOUT = 30mA
5.05
IOUT = 100mA
5.00
4.95
15.0
10.0
IOUT = 10mA
5.0
IOUT = 30mA
IOUT = 100mA
4.90
0.0
-50
-25
0
25
50
75
Ambient Temperature: Ta [℃]
100
(7) CE Threshold Voltage vs. Ambient Temperature
CE Threshold Voltage: VCE [V]
XC6501
VIN = VOUT + 1.0V
IOUT = 1mA, CIN = 0.1μF (ceramic)
0.8
0.7
0.6
0.5
CE "H" LEVEL
CE "L" LEVEL
0.4
-50
12/21
-25
0
25
50
75
Ambient Temperature: Ta [℃]
100
-50
-25
0
25
50
75
Ambient Temperature: Ta [℃]
100
XC6501
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(8) Rising Response Time
0.0
Output Voltage
-3.0
1.0
IOUT = 10mA
-6.0
IOUT = 30mA
IOUT = 100mA
0.5
0.0
Output Voltage
-3.0
1.0
-6.0
Output Voltage
-3.0
3.0
2.0
IOUT = 10mA
-6.0
IOUT = 30mA
IOUT = 100mA
-9.0
1.0
9.0
Input Voltage: VIN[V]
4.0
0.0
IOUT = 30mA
IOUT = 100mA
tr = 5μs, Ta = 25℃
VIN = 0→6.0V, CIN = 0.1μF (ceramic), Without CL
6.0
3.0
Output Voltage
0.0
-3.0
2.0
-6.0
IOUT = 30mA
IOUT = 100mA
XC6501x501
3.0
8.0
Output Voltage
-3.0
6.0
4.0
IOUT = 10mA
IOUT = 30mA
IOUT = 100mA
Time [50μs/div]
2.0
0.0
9.0
Input Voltage: VIN [V]
10.0
3.0
IOUT = 10mA
XC6501x501
Input Voltage
6.0
4.0
Time [50μs/div]
6.0
0.0
5.0
-9.0
12.0
0.5
Input Voltage
Time [50μs/div]
tr = 5μs, Ta = 25℃
VIN = 0→6.0V, CIN = CL = 0.1μF (ceramic)
1.5
IOUT = 10mA
-9.0
6.0
5.0
0.0
-9.0
0.0
XC6501x281
tr = 5μs, Ta = 25℃
VIN = 0→6.0V, CIN = CL = 0.1μF (ceramic)
3.0
-6.0
2.0
XC6501x281
Input Voltage
0.0
3.0
Time [50μs/div]
6.0
9.0
2.5
Input Voltage
Time [50μs/div]
Output Voltage: VOUT [V]
9.0
Input Voltage: VIN [V]
1.5
6.0
3.0
tr = 5μs, Ta = 25℃
VIN = 0→6.0V, CIN = 0.1μF (ceramic), Without CL
6.0
1.0
0.0
12.0
10.0
Input Voltage
3.0
0.0
8.0
Output Voltage
-3.0
6.0
4.0
IOUT = 10mA
-6.0
-9.0
IOUT = 30mA
IOUT = 100mA
Output Voltage: VOUT [V]
2.0
tr = 5μs, Ta = 25℃
VIN = 0→6.0V, CIN = 0.1μF (ceramic), Without CL
Output Voltage: VOUT [V]
3.0
9.0
Input Voltage: VIN [V]
2.5
Input Voltage
-9.0
Input Voltage: VIN [V]
3.0
Output Voltage: VOUT [V]
6.0
XC6501x121
Output Voltage: VOUT [V]
Input Voltage: VIN [V]
9.0
tr = 5μs, Ta = 25℃
VIN = 0→6.0V, CIN = CL = 0.1μF (ceramic)
2.0
Output Voltage: VOUT [V]
XC6501x121
0.0
Time [50μs/div]
13/21
XC6501 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(9) Input Transient Response
IOUT = 30mA
1.3
IOUT = 100mA
0.0
1.2
Output Voltage
-1.0
Input Voltage: VIN [V]
1.2
Output Voltage
-1.0
3.3
3.1
IOUT = 10mA
3.0
3.0
IOUT = 30mA
Output Voltage
IOUT = 100mA
1.0
2.9
2.8
6.0
Input Voltage: VIN [V]
3.2
0.0
1.1
2.7
tr = tf = 5μs, Ta = 25℃
VIN = 3.8V⇔4.8V, CIN = 0.1μF (ceramic), Without CL
5.0
3.2
4.0
3.1
IOUT = 10mA
3.0
2.0
Output Voltage
IOUT = 100mA
1.0
2.7
XC6501x501
XC6501x501
6.0
5.4
Input Voltage
5.0
IOUT = 10mA
IOUT = 30mA
4.0
5.3
5.2
IOUT = 100mA
Output Voltage
2.0
5.1
5.0
4.9
Time [200μs/div]
7.0
2.9
2.8
0.0
5.5
3.0
IOUT = 30mA
Time [200μs/div]
tr = tf = 5μs, Ta = 25℃
VIN = 5.5V⇔6.0V, CIN = CL = 0.1μF (ceramic)
3.3
Input Voltage
Time [200μs/div]
1.0
14/21
0.0
XC6501x281
tr = tf = 5μs, Ta = 25℃
VIN = 3.8V⇔4.8V, CIN = CL = 0.1μF (ceramic)
1.3
IOUT = 100mA
XC6501x281
4.0
3.0
IOUT = 30mA
1.0
Time [200μs/div]
Input Voltage
7.0
1.4
IOUT = 10mA
Time [200μs/div]
5.0
2.0
1.5
Input Voltage
2.0
Input Voltage: VIN [V]
Input Voltage: VIN [V]
6.0
1.1
1.6
tr = tf = 5μs, Ta = 25℃
VIN = 5.5V⇔6.0V, CIN = 0.1μF (ceramic), Without CL
6.0
5.5
5.4
Input Voltage
5.3
5.0
IOUT = 10mA
4.0
IOUT = 30mA
5.2
IOUT = 100mA
3.0
Output Voltage: VOUT [V]
1.0
tr = tf = 5μs, Ta = 25℃
VIN = 2.2V⇔3.2V, CIN = 0.1μF (ceramic), Without CL
Output Voltage: VOUT [V]
1.4
IOUT = 10mA
3.0
Input Voltage: VIN [V]
2.0
Output Voltage: VOUT [V]
1.5
Input Voltage
4.0
Output Voltage: VOUT [V]
Input Voltage: VIN [V]
3.0
1.6
Output Voltage: VOUT [V]
4.0
XC6501x121
tr = tf = 5μs, Ta = 25℃
VIN = 2.2V⇔3.2V, CIN = CL = 0.1μF (ceramic)
Output Voltage
2.0
5.1
5.0
1.0
4.9
Time [200μs/div]
Output Voltage: VOUT [V]
XC6501x121
XC6501
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(10) Load Transient Response
0.8
50mA
0.1mA
50
0
0.6
100
Output Current
100
Output Current
2.0
50
0
3.0
10mA
tr = tf = 5μs, Ta = 25℃
IOUT = 10⇔50mA, VIN = 3.8V, CIN = 0.1μF (ceramic)
CL = 0.1μF
2.8
2.6
150
2.4
2.2
100
Output Current
XC6501x501
5.0
200
Output Voltage
4.8
150
4.6
100
Output Current
4.2
Time [40μs/div]
50
0
5.2
tr = tf = 5μs, Ta = 25℃
IOUT = 10⇔50mA, VIN = 6.0V, CIN = 0.1μF (ceramic)
CL = 0.1μF
50
0
300
250
Without CL
5.0
200
Output Voltage
4.8
150
4.6
4.4
100
Output Current
50mA
⇔
⇔
50mA
0.1mA
Output Voltage: VOUT [V]
250
5.4
50mA
10mA
XC6501x501
Without CL
300
200
Time [40μs/div]
CL = 0.1μF
0
Output Voltage
2.0
300
50
250
Without CL
Time [40μs/div]
tr = tf = 5μs, Ta = 25℃
IOUT = 0.1⇔50mA, VIN = 6.0V, CIN = 0.1μF (ceramic)
50mA
⇔
⇔
50mA
0.1mA
Output Voltage: VOUT [V]
150
3.2
Output Current: IOUT [mA]
200
2.4
4.4
0.8
0.4
300
250
Without CL
2.6
5.2
150
XC6501x281
Output Voltage
5.4
1.0
XC6501x281
2.8
2.2
200
Output Voltage
Time [40μs/div]
CL = 0.1μF
3.0
1.2
Time [40μs/div]
tr = tf = 5μs, Ta = 25℃
IOUT = 0.1⇔50mA, VIN = 3.8V, CIN = 0.1μF (ceramic)
250
Without CL
⇔
0.6
100
Output Current
CL = 0.1μF
300
10mA
4.2
Output Current: IOUT [mA]
150
1.4
tr = tf = 5μs, Ta = 25℃
IOUT = 10⇔50mA, VIN = 2.2V, CIN = 0.1μF (ceramic)
Output Current: IOUT [mA]
1.0
Output Voltage: VOUT [V]
200
Output Voltage
1.6
Output Current: IOUT [mA]
1.2
3.2
Output Voltage: VOUT [V]
250
Without CL
0.4
Output Voltage: VOUT [V]
300
Output Current: IOUT [mA]
1.4
CL = 0.1μF
⇔
Output Voltage: VOUT [V]
1.6
XC6501x121
tr = tf = 5μs, Ta = 25℃
IOUT = 0.1⇔50mA, VIN = 2.2V, CIN = 0.1μF (ceramic)
50
Output Current: IOUT [mA]
XC6501x121
0
Time [40μs/div]
15/21
XC6501 Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(11) CE Rising Respose Time
0.0
Output Voltage
-1.0
1.5
1.0
IOUT = 10mA
-2.0
IOUT = 30mA
IOUT = 100mA
0.0
2.5
CE Input Voltage
1.0
2.0
0.0
Output Voltage
-1.0
1.0
-2.0
IOUT = 30mA
IOUT = 100mA
-3.0
Time [40μs/div]
XC6501x281
XC6501x281
VIN = 2.2V, tr = 5μs, Ta = 25℃
VCE = 0→VIN, CIN = CL = 0.1μF (ceramic)
4.0
6.0
5.0
CE Input Voltage
2.0
4.0
Output Voltage
0.0
-2.0
3.0
2.0
IOUT = 10mA
-4.0
IOUT = 30mA
1.0
6.0
VIN = 3.8V, tr = 5μs, Ta = 25℃
VCE = 0→VIN, CIN = 0.1μF (ceramic), Without CL
4.0
2.0
Output Voltage
0.0
-2.0
2.0
-4.0
IOUT = 30mA
XC6501x501
3.0
8.0
Output Voltage
-3.0
4.0
IOUT = 10mA
-6.0
-9.0
IOUT = 30mA
IOUT = 100mA
Time [40μs/div]
16/21
6.0
2.0
0.0
9.0
Input Voltage: VCE [V]
10.0
CE Input Voltage
0.0
IOUT = 100mA
XC6501x501
6.0
3.0
IOUT = 10mA
-6.0
12.0
6.0
4.0
Time [40μs/div]
VIN = 2.2V, tr = 5μs, Ta = 25℃
VCE = 0→VIN, CIN = CL = 0.1μF (ceramic)
0.0
5.0
Time [40μs/div]
Output Voltage: VOUT [V]
Input Voltage: VCE [V]
9.0
0.0
0.5
CE Input Voltage
IOUT = 100mA
-6.0
1.5
IOUT = 10mA
Time [40μs/div]
Input Voltage: VCE [V]
6.0
0.5
2.0
3.0
VIN = 6.0V, tr = 5μs, Ta = 25℃
VCE = 0→VIN, CIN = 0.1μF (ceramic), Without CL
6.0
1.0
0.0
12.0
10.0
CE Input Voltage
3.0
0.0
8.0
Output Voltage
-3.0
6.0
4.0
IOUT = 10mA
-6.0
-9.0
IOUT = 30mA
IOUT = 100mA
Time [40μs/div]
Output Voltage: VOUT [V]
2.0
VIN = 2.2V, tr = 5μs, Ta = 25℃
VCE = 0→VIN, CIN = 0.1μF (ceramic), Without CL
Output Voltage: VOUT [V]
1.0
3.0
Input Voltage: VCE [V]
2.5
CE Input Voltage
-3.0
Input Voltage: VCE [V]
3.0
Output Voltage: VOUT [V]
2.0
XC6501x121
Output Voltage: VOUT [V]
Input Voltage: VCE [V]
3.0
VIN = 2.2V, tr = 5μs, Ta = 25℃
VCE = 0→VIN, CIN = CL = 0.1μF (ceramic)
2.0
0.0
Output Voltage: VOUT [V]
XC6501x121
XC6501
Series
■TYPICAL PERFORMANCE CHARACTERISTICS (Continued)
(12) Ripple Rejection Rate
XC6501x121
Ta = 25℃
V IN = 2.2VDC+0.5Vp-p AC, CL = 0.1μF (ceramic)
100
80
60
40
IOUT = 0.1mA
20
IOUT = 30mA
IOUT = 10mA
IOUT = 100mA
0
0.01
0.1
1
10
Ripple Frequency: f [kHz]
100
Ripple Rejection Rate: PSRR [dB]
Ripple Rejection Rate: PSRR [dB]
XC6501x121
Ta = 25℃
VIN = 2.2V DC+0.5Vp-pAC, Without CL
100
80
60
40
IOUT = 0.1mA
20
IOUT = 30mA
IOUT = 10mA
IOUT = 100mA
0
0.01
0.1
1
10
Ripple Frequency: f [kHz]
100
80
60
40
IO UT = 0.1mA
IO UT = 10mA
20
IO UT = 30mA
IO UT = 100mA
0
0.01
0.1
1
10
100
80
60
100
80
60
40
I OUT = 0.1mA
I OUT = 10mA
20
I OUT = 30mA
I OUT = 100mA
0
0.01
0.1
1
10
Ripple Frequency: f [kHz]
XC6501x501
XC6501x501
IOUT = 0.1mA
IOUT = 10mA
IOUT = 30mA
IOUT = 100mA
40
20
0
0.01
Ta = 25℃
VIN = 3.8V DC+0.5Vp-pAC, Without CL
Ripple Frequency: f [kHz]
Ta = 25℃
VIN = 5.75VDC+0.5Vp-p AC, CL = 0.1μF (ceramic)
100
Ripple Rejection Rate: PSRR [dB]
XC6501x281
Ta = 25℃
V IN = 3.8VDC+0.5Vp-p AC, CL = 0.1μF (ceramic)
0.1
1
10
Ripple Frequency: f [kHz]
100
Ripple Rejection Rate: PSRR [dB]
Ripple Rejection Rate: PSRR [dB]
Ripple Rejection Rate: PSRR [dB]
XC6501x281
100
100
Ta = 25℃
VIN = 5.75V DC+0.5Vp-pAC, Without CL
100
80
60
IOUT = 0.1mA
IOUT = 10mA
IOUT = 30mA
IOUT = 100mA
40
20
0
0.01
0.1
1
10
Ripple Frequency: f [kHz]
100
17/21
XC6501 Series
■PACKAGING INFORMATION
● USP-3
● USP-4
1.2±0.08
1.2±0.08
1pin INDENT
1pin INDENT
(0.6)
0.3±0.05
0.3±0.05
1
2
(R0.1)
(R0.05)
3
3
(0.6)
1.0±0.1
1.0±0.1
● SSOT-24
● SOT-25
2.9±0.2
2.0±0.1
+0.15
0.25 -0.1
0.4
+0.1
+0.1
-0.05
5
4
0 -0
+0.15
0.35 -0.1
1.3±0.2
0~0.1
+0.1
0.125 -0.05
1
2
(0.95)
1.9±0.2
18/21
3
+0.1
0.15 -0.05
XC6501
Series
■PACKAGING INFORMATION (Continued)
●USP-3 Reference Metal Mask Design
0.3
●USP-4 Reference Pattern Layout
0.5
0.25
1.2
0.7
0.25
1.35
0.4
●USP-3 Reference Pattern Layout
●USP-4 Reference Metal Mask Design
1.0
0.8
0.35
0.35
0.35
0.35
4
3
4
3
0.3
1
2
0.6
1
2
0.6
19/21
XC6501 Series
■PACKAGING INFORMATION (Continued)
●
SOT-25 Power Dissipation
Power dissipation data for the SOT-25 is shown in this page.
The value of power dissipation varies with the mount board conditions.
Please use this data as one of reference data taken in the described
condition.
1.
2.
Measurement Condition (Reference data)
Condition: Mount on a board
Ambient: Natural convection
Soldering: Lead (Pb) free
Board:
Dimensions 40 x 40 mm (1600 mm2 in one side)
Copper (Cu) traces occupy 50% of the board area
In top and back faces
Package heat-sink is tied to the copper traces
(Board of SOT-26 is used.)
Material: Glass Epoxy (FR-4)
Thickness: 1.6 mm
Through-hole: 4 x 0.8 Diameter
評価基板レイアウト(単位:mm)
Evaluation Board (Unit: mm)
Power Dissipation vs. Operating temperature
Board Mount (Tj max = 125℃)
Ambient Temperature(℃)
Power Dissipation Pd(mW)
25
600
85
240
Thermal Resistance (℃/W)
166.67
許容損失Pd(mW)
Power Dissipation Pd (mW)
Pd-Ta特性グラフ
Pd vs. Ta
700
600
500
400
300
200
100
0
25
20/21
45
65
85
Ambient
Temperature Ta (℃)
周辺温度Ta(℃)
105
125
XC6501
Series
1. The products and product specifications contained herein are subject to change without
notice to improve performance characteristics.
Consult us, or our representatives
before use, to confirm that the information in this datasheet is up to date.
2. We assume no responsibility for any infringement of patents, patent rights, or other
rights arising from the use of any information and circuitry in this datasheet.
3. Please ensure suitable shipping controls (including fail-safe designs and aging
protection) are in force for equipment employing products listed in this datasheet.
4. The products in this datasheet are not developed, designed, or approved for use with
such equipment whose failure of malfunction can be reasonably expected to directly
endanger the life of, or cause significant injury to, the user.
(e.g. Atomic energy; aerospace; transport; combustion and associated safety
equipment thereof.)
5. Please use the products listed in this datasheet within the specified ranges.
Should you wish to use the products under conditions exceeding the specifications,
please consult us or our representatives.
6. We assume no responsibility for damage or loss due to abnormal use.
7. All rights reserved. No part of this datasheet may be copied or reproduced without the
prior permission of TOREX SEMICONDUCTOR LTD.
21/21