443 443-009 Submersible EMI/RFI Cable Sealing Backshell Band-in-a-Can with Strain-Relief Direct Coupling - Full Radius Profile 443 F N 009 NF 16 12 H K P CONNECTOR DESIGNATORS A-F-H-L-S Polysulfide (Omit for none) Connector Designator B = Band K = Precoiled Band (Omit for none) Angle and Profile M = 45° N = 90° See page 443-2 for straight ROTATABLE COUPLING .88 (22.4) Max Product Series Strain Relief Style (H, A, M, D, Tables X, & XI) Basic Part No. Dash No. (Table IV) Finish (Table II) Shell Size (Table I) A Thread (Table I) E G (Table III) O-Ring (Table III) O- Ring C Typ. (Table I) F (Table III) 1.25 (31.8) Max STYLE 2 (See Note 1) H (Table III) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option J (Table IV) Polysulfide Stripes P Option Band Option (K Option Shown See Note 4) STYLE H Heavy Duty (Table X) STYLE A Medium Duty (Table XI) STYLE M Medium Duty (Table XI) W T Cable Range © 2005 Glenair, Inc. V Cable Range .135 (3.4) Max X Y CAGE Code 06324 STYLE D Medium Duty (Table XI) Cable Range Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 443 - Page 4 443 443-009 Submersible EMI/RFI Cable Sealing Backshell Band-in-a-Can with Strain-Relief Direct Coupling - Full Radius Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E F G Conn. Desig. Max Max Max A-F-L-S H .817 (20.8) 1.057 (26.8) 1.125 (28.6) 09 08 .861 (21.9) 1.111 (28.2) 1.250 (31.8) 11 10 .911 (23.1) 1.161 (29.5) 1.375 (34.9) 13 12 .965 (24.5) 1.215 (30.9) 1.500 (38.1) 15 14 17 1.014 (25.8) 1.264 (32.1) 1.625 (41.3) 16 19 1.064 (27.0) 1.314 (33.4) 1.750 (44.5) 18 21 1.118 (28.4) 1.368 (34.7) 1.875 (47.6) 20 23 1.172 (29.8) 1.422 (36.1) 2.000 (50.8) 22 25 1.221 (31.0) 1.471 (37.4) 2.125 (54.0) 24 T Clamp Max Size 04 .780 (19.8) 06 .780 (19.8) 08 .780 (19.8) 10 .780 (19.8) 12 .811 (20.6) 16 .905 (23.0) 20 1.092 (27.7) 24 1.124 (28.5) 28 1.399 (35.5) H Max 1.375 (34.9) 1.500 (38.1) 1.625 (41.3) 1.750 (44.5) 1.875 (47.6) 2.000 (50.8) 2.125 (54.0) 2.250 (57.2) 2.375 (60.3) TABLE X: CABLE ENTRY V Cable Range Min Max Max .125 (3.2) .312 (7.9) .957 (24.3) .250 (6.4) .437 (11.1) 1.145 (29.1) .387 (9.8) .562 (14.3) 1.332 (33.8) .350 (8.9) .625 (15.9) 1.332 (33.8) .500 (12.7) .750 (19.1) 1.551 (39.4) .625 (15.9) .937 (23.8) 1.770 (45.0) .875 (22.2) 1.250 (31.8) 2.113 (53.7) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) TABLE IV: CABLE ENTRY J Dash Clamp Dia No. Size .125 (3.2) 02 03 .188 (4.8) 03 03 .250 (6.4) 04 03 .312 (7.9) 05 04 .375 (9.5) 06 06 .438 (11.1) 07 06 .500 (12.7) 08 08 .562 (14.3) 09 10 .625 (15.9) 10 10 .688 (17.5) 11 12 .750 (19.1) 12 12 .812 (20.6) 13 16 .875 (22.2) 14 16 .938 (23.8) 15 16 16 20 1.000 (25.4) 17 20 1.062 (27.0) 18 20 1.125 (28.6) 20 20 1.250 (31.8) 22 24 1.375 (34.9) 24 28 1.500 (38.1) TABLE XI: CABLE ENTRY Clamp W X Y Z Cable Range Size Max Max Max Min ** Max Max 03*.437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04*.437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06*.500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08.563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 10.563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12.563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16.656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 20.656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 24.656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) * Not available in Style M clamp. ** Not Applicable Style D 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G, and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. O-Ring not supplied with Connector Designator A. 4. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 443 - Page 5