39 390-008 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type C - Direct Coupling - Low Profile 390 F S 008 M 16 10 M 6 CONNECTOR DESIGNATORS * Length: S only (1/2 inch increments: e.g. 6 = 3 inches) Product Series A-B -C-D-E-F G-H-J-K-L-S Connector Designator Strain Relief Style (H, A, M, D) Angle and Profile A = 90 B = 45 S = Straight * Conn. Desig. B See Note 5 DIRECT COUPLING TYPE C OVERALL SHIELD TERMINATION Cable Entry (Tables X, XI) Shell Size (Table I) Finish (Table II) Basic Part No. Length * A Thread (Table I) Length ± .060 (1.52) Min. Order Length 2.0 Inch (See Note 4) 1.125 (28.6) Approx. O-Ring * Length ± .060 (1.52) Min. Order Length 1.5 Inch (See Note 4) B (Table I) STYLE 2 (STRAIGHT See Note 1) J J E G (Table III) (Table IV) (Table III) (Table IV) B (Table I) F (Table IV) B (Table I) H (Table IV) STYLE H Heavy Duty (Table X) STYLE A Medium Duty (Table XI) W T Cable Range © 2005 Glenair, Inc. V Cable Range STYLE M Medium Duty (Table XI) X Y CAGE Code 06324 Cable Range STYLE D Medium Duty (Table XI) .135 (3.4) Max Y Cable Entry Z Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 32 39 390-008 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type C - Direct Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. Shell Size 08/09 10/11 12/13 14/15 16/17 18/19 20/21 22/23 24/25 28/29 32/33 36 40 TABLE III: FRONT ADAPTER J Max - Conn. Designator A-E-F D-B-G-K J-H-L-S C 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE IV: ELBOW DIMENSIONS Elbow E F G Size Max Max Max 04 .630 (16.0) 2.715 (69.0) .636 (16.2) 06 .630 (16.0) 2.775 (70.5) .710 (18.0) 08 .692 (17.6) 2.835 (72.0) .731 (18.6) 10 .755 (19.2) 3.554 (90.3) .825 (21.0) 12 .848 (21.5) 3.664 (93.1) .988 (25.1) 16 1.036 (26.3) 3.854 (97.9) 1.087 (27.6) 20 1.130 (28.7) 4.192 (106.5) 1.325 (33.7) 24 1.255 (31.9) 4.225 (107.3) 1.337 (34.0) 28 1.317 (33.5) 4.325 (109.9) 1.827 (46.4) 32 1.348 (34.2) 4.465 (113.4) 2.027 (51.5) TABLE X: CABLE ENTRY Cable Range V T Dash Max Min Max No. Max .957 (24.3) .125 (3.2) .312 (7.9) .780 (19.8) 04 .250 (6.4) .437 (11.1) .780 (19.8) 1.145 (29.1) 06 .387 (9.8) .562 (14.3) .780 (19.8) 1.332 (33.8) 08 .350 (8.9) .625 (15.9) .780 (19.8) 1.332 (33.8) 10 .500 (12.7) .750 (19.1) .811 (20.6) 1.551 (39.4) 12 .625 (15.9) .937 (23.8) .905 (23.0) 1.770 (45.0) 16 .875 (22.2) 1.250 (31.8) 1.092 (27.7) 2.113 (53.7) 20 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 24 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 28 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) 32 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. When using Connector Designator B refer to pages 18 and 19 for part number development. TABLE XI: CABLE ENTRY Dash Y X W Z No. Max Max Max Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) * Not available in Style M clamp (Style A clamp supplied). © 2005 Glenair, Inc. CAGE Code 06324 H Max 2.725 (69.2) 2.845 (72.3) 2.865 (72.8) 3.564 (90.5) 3.654 (92.8) 3.824 (97.1) 4.122 (104.7) 4.275 (108.6) 4.525 (114.9) 4.575 (116.2) Cable Range Min ** Max .156 (4.0) .250 (6.4) .188 (4.8) .312 (7.9) .281 (7.1) .438 (11.1) .387 (9.8) .562 (14.3) .375 (9.5) .625 (15.9) .438 (11.1) .750 (19.1) .625 (15.9) .938 (23.8) .875 (22.2) 1.250 (31.8) 1.000 (25.4) 1.375 (34.9) 1.250 (31.8) 1.625 (41.3) 1.437 (36.5) 1.875 (47.6) 1.875 (47.6) 2.375 (60.3) ** Not Applicable Style D Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] Series 39 - Page 33