YD1028 YOUDA INTEGRATED CIRCUIT 18W CAR RADIO POWER AMPLIFIER—YD1028 DESCRIPTION The YD1028 is an integrated class-B dual output amplifier in a 9-lead single in-line (TO220Z9) plastic power package. The device is primarily developed for car radio applications. FEATURES *Requires very few external components for Bridge Tied Load (BTL),Stereo or BTL application; *High output power, Fixed gain, Good ripple rejection; * Identical inputs (inverting and non-inverting),Low offset voltage at output (important for BTL); *Mute/stand-by switch, No switch-on/switch-off plop; *Load dump protection, AC and DC short-circuit-safe to ground and Vcc, Thermally protected; *Reverse polarity safe; *Capability to handle high energy on outputs (Vcc=0V); *Protected against electrostatic discharge. BLOCK DIAGRAM +_ + Rm _+ + Rm gm gm + gm gm _ ×1 + ×1 183Ω 18k _ 18k 183Ω 60k 60k internal 1/2Vcc stand-by / mute 1 2 3 4 5 6 OUT2 IN1 PRE-GND 1/2Vcc OUT1 PWE-GND 7 Vcc 8 SBY/M 9 IN2 WuXi YouDa Electronics Co., Ltd Tel: Add: No.5 Xijin Road, National Hi-Tech Industrial Development Zone, Wuxi Jiangsu China 86-510-85205117 86-510-85205106 Fax: 86-510-85205110 Website: www.e-youda.com SHENZHEN OFFICE Tel: 86-755-83740369 Fax: 86-755-83741418 Ver 5.0 1 of 6 2006-06-28 YD1028 YOUDA INTEGRATED CIRCUIT ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Supply Voltage Operating (Tamb=25℃) TEST CONDITIONS VALUE UNIT Vcc 18 V Non-operating Vcc 20 V AC And DC Shot-circuit-safe Voltage Vccsc 18 V Reverse Polarity Vccr 6 V Non-repetitive Peak Output Current IOSM 4 A Repetitive Peak Output Current IORM 2.5 A Total Power Dissipation PD Infinite Heat Sink 20 No Heat Sink 4.0 W Operating Temperature Topr -20~+75 ℃ Storage Temperature Tstg -55~+150 ℃ ELECTRICAL CHARACTERISTICS DC CHARACTERISTICS (Vcc=13.2V, Tamb=25℃, BTL, unless otherwise specified) PARAMETER SYMBOL Supply Voltage Range Vcc Total Quiescent Current TEST CONDITIONS MIN TYP MAX UNIT 6.0 13.2 18.0 V Iccq 40 60 mA DC Output Voltage Vo 6.2 DC Output Offset Voltage |△V4-6| Operating/Mute Switch-on Voltage Level VON Operating 8.5 Mute Condition Vmute Mute 3.3 Stand-by Condition Vst-by DC Current in Stand-by Control Current in Stand-by V 250 mV V 6.4 V Stand-by 2.0 V Iccsb V8≤2.0V 100 μA I8sb V8≤2.0V 40 μA WuXi YouDa Electronics Co., Ltd 2 of 6 12 Website: www.e-youda.com YD1028 YOUDA INTEGRATED CIRCUIT AC CHARACTERISTICS (Vcc=13.2V, RL=4Ω, f=1KHz, Tamb=25℃; BTL, unless otherwise specified) PARAMETER SYMBOL Output Power Po TEST CONDITIONS MIN TYP MAX UNIT THD=1.0% 12 13 W THD=10% 16 18 W 45 46 Closed Loop Voltage Gain Gv Total Harmonic Distortion THD Po =1W Output Signal In Mute Position Vo Vin=1V(max.); f=20 Hz to 15 kHz Low Frequency Roll-off fL -3dB High Frequency Roll-off fH -3dB 20 kHz ON,Vr=2Vp-p, Rg=0,fr=100Hz 34 dB ON,Vr=2Vp-p,Rg=0, fr=1kHz~10kHz 48 dB 48 dB 80 dB Supply Voltage Ripple Rejection RR Mute Stand-by Input Impedance Noise Output Voltage (RMS value) Vr=2Vp-p,Rg=0, fr=100Hz, 1kHz~10kHz |Zi| Vno WuXi YouDa Electronics Co., Ltd 0.1 45 30 ON,Rg=0Ω, BPF=20Hz~20kHz 200 ON, Rs=10kΩ BPF=20Hz~20kHz 350 Mute,BPF=20Hz~20kHz 180 dB % 40 25 3 of 6 47 mV Hz 38 kΩ μV 700 μV μV Website: www.e-youda.com YD1028 YOUDA INTEGRATED CIRCUIT AC CHARACTERISTICS Vcc=13.2V, RL=2Ω, f=1KHz; Tamb=25℃, stereo, unless otherwise specified PARAMETER SYMBOL Output Power Po Output Power (Vcc=14.4V) Po Closed Loop Voltage Gain Gv Total Harmonic Distortion THD Po =1W Output Signal In Mute Position Vo Vin=1V(max.); f=20 Hz to 15 kHz Low Frequency Roll-off fL -3dB High Frequency Roll-off fH -3dB 20 kHz ON,Vr=2Vp-p,Rg=0, fr=100Hz 40 dB ON,Vr=2Vp-p,Rg=0, fr=1kHz~10kHz 45 dB 45 dB 80 dB Supply Voltage Ripple Rejection RR TEST CONDITIONS Channel Separation α Channel Unbalance |△Gv| WuXi YouDa Electronics Co., Ltd UNIT THD=1.0% 8.0 W THD=10% 9.0 W 5.0 W RL=4Ω,THD=10% 5.8 6.2 W 39 40 Vr=2Vp-p,Rg=0, fr=100Hz, 1kHz~10kHz Zi Vno MAX 4.8 Stand-by Noise Output Voltage (RMS value) TYP RL=4Ω,THD=1.0% Mute Input Impedance MIN 41 0.1 % 20 45 50 dB mV Hz 60 75 kΩ ON,Rg=0Ω, BPF=20Hz~20kHz 150 500 μV ON, Rs=10kΩ BPF=20Hz~20kHz 250 μV Mute,BPF=20Hz~20kHz 120 μV Rs=10kΩ 40 dB 0.1 4 of 6 1 dB Website: www.e-youda.com YD1028 YOUDA INTEGRATED CIRCUIT APPLICATION CIRCUIT Vcc stand-by switch + 3 100μ stand-by / mute 40dB 60kΩ 40dB + - 1 + 60kΩ input 1 470μF 7 8 internal 1/2Vcc + 100nF input 2 9 220nF 220nF signal ground 2 4 6 5 + + 470μF 470μF power ground Stereo application circuit diagram Vcc stand-by switch 3 100nF 7 8 internal 1/2Vcc 60kΩ + 40dB - 220nF 60kΩ 40dB + 1 470μF stand-by / mute input + 2 4 6 signal ground 9 5 power ground BTL application circuit diagram WuXi YouDa Electronics Co., Ltd 5 of 6 Website: www.e-youda.com YD1028 YOUDA INTEGRATED CIRCUIT OUTLINE DRAWING Unit: inch / mm WuXi YouDa Electronics Co., Ltd 6 of 6 Website: www.e-youda.com