SWITCH Z15J

Pro Audio & Broadcast Catalog
Sixth Edition
w
Patchbays, Patchcords &
Molded Cable Assemblies
Connectors and Adapters
w
w
.
s
Jacks and Plugs
w
i
t
c
h
c
r
a
f
t
.
Guitar Switches
c
o
m
* Please visit the product pages on our website for the most up-to-date product information
1
About Switchcraft, Inc.
Switchcraft, Inc. was established in 1946 to
manufacture jacks, plugs, and switches. We
have since become the industry leader in
producing a wide variety of connectors, adapters,
jacks and plugs, patchbays, jackfields, and
switches. While our products cover a diverse
number of markets, this catalog focuses on our
line of audio and video products, typically found
in broadcast, recording, sound reinforcement,
and other pro audio applications.
Some of the new products you’ll find in this
catalog include our EZ Norm Series of audio
patchbays, where normal configurations can be
changed from the front of the patchbay, using a
standard screwdriver. Also found in this edition
are new combination audio/video patchbays
in both standard/long-frame and midsize/bantam
styles. In the connector section, we’re offering
a new line of connectors called our EH Series,
incorporating a wide range of connectors (Firewire,
USB, Category 6, BNC, RCA, and more) in a
standard XLR housing.
Please keep in mind that this is just a small
sampling of our complete product lines. For
more detailed information, we offer our “full
line” catalog, our Engineering Design Guide.
Our Engineering Design Guide includes over
5,000 part numbers covering all five major
product lines. If you don't see it here, chances
are you'll find it in the EDG. And again, keep in
mind that the EDG is also just a "snapshot" of
our capabilities. We manufacture over 30,000
part numbers, so if it's not in the EDG, please
contact us with your requirements. To keep up
on all the new products we have to offer, visit
our website at www.switchcraft.com and look
for the New Product Showcase.
Patchbay Series
4 – 43
Patchcords/Molded Cables
44 – 45
Connector Series
46 – 62
Audio Adapter Series
63 – 64
Jack Series
65 – 82
Plug Series
83 – 93
Switch Series
94 – 96
Index
98 – 100
Detailed Table of Contents — Pages 2 – 3
* Please visit the product pages on our website for the most up-to-date product information
2
Table of Contents
Patchbays
Connectors
Professional Punchdown Terminal (PPT) ....................4
Q-G® Audio Connector Series ..............................46-48
Audio Patchbay Series ............................................5–33
A, AA, AAA Cord Style Series ................................46
MTPH/TTPH Harness Series ..................................5-7
B, C, D, E Panel Style Series....................................47
Front Access Series ................................................8–9
EZ Norm Patchbay Series..................................10–11
J, K, P, R, T Wallplate, Gooseneck,
Panel & Cord Style Series........................................48
RS 422 Data Patchbay Series ............................12–13
Tini-Q-G® Connector Series ......................................49
MTP48K Wired Series ........................................14–15
Tini-Q-G® Cord & Panel Style Series ....................49
TTPW96K Wired Series ......................................16–17
HPC Connector Series ............................................50-51
MTPBP/TTPBP Backpanel Series ......................18–19
HPC Panel Style Series ............................................50
TT96 EDAC Series ..............................................20–21
HPC Cord, & Adapter Style Series..........................51
TTP96K Patchkit Series ......................................22–23
EH Series Receptacles ................................................52
MT48K/MT52K Patchkit Series ..........................24–25
MIDI and 2500 Series ..................................................53
MT48/MT52 Patchbay Series ............................26–27
HP75BNC Series ..........................................................54
TTP96AS Patchbay Series..................................28–29
Connector Dimension Drawings ..........................55–62
HPC Patchbay Series ..........................................30–31
HP75BNC Series, EH Series ....................................55
Q-G Patchbay Series ........................................32–33
Q-G Audio - A, AA, AAA Series ..............................56
Video/Audio Patchbay Series................................34–44
Q-G Audio - B, C, D, E Series ..................................57
VPP Video Patchbay Series................................34–36
Q-G Audio - J, K, P, R Series....................................58
MVP Midsize Video Patchbay Series ................37–39
Q-G Audio - T Series ................................................59
VAP Video/Audio Patchbay Series ....................40–41
MIDI, Q-G Audio - P Series ......................................60
MVEZN Audio/Midsize Patchbay Series....................42
HPC Panel Style Series ......................................61–62
®
MBPK Video/Audio Patchbay Series ......................43
Audio and Video Patchcords ................................44–45
Audio Adapters
XLR to XLR, RCA, 1/4", TQ-G Adapter Series ..........63
1/4" to 1/4", RCA; RCA to RCA;
& Miscellaneous Adapter Series ................................64
* Please visit the product pages on our website for the most up-to-date product information
Table of Contents
Jacks & Plugs
Jack Series
Littel Phone, Hi-D, Right Angle PC Mount 1/4", 1/4"
Extension Jack Series ..............................................65
Littel Right Angle 1/4”, Silent, Super
Heavy Duty Plug Series ..........................................89
Thick Panel/Guitar, Locking 1/4", Tini, TiniExtension, Micro, 3.5mm ........................................67
Tini, Micro Plug Series ............................................90
Phono, Phono Extension, TT or Bantam, MT 1/4”
Jack Series ................................................................69
Phono and Phone Right Angle Plug Series ..........92
35HD 3.5mm Stereo Plug Series ............................91
TT or Bantam, Mil-Style 1/4” Plug Series ............93
Power/Jacks Plugs Series – 700, S700,
800 Cord & Panel Style Series ................................71
Switches
Jack Series Dimension Drawings ........................72–82
Switch Series ..........................................................94–95
Littel Phone, Hi-D, 1/4” Extension, 700 Panel Jack
Series ........................................................................72
Switch Series Dimension Drawings ..........................96
Littel Phone, Hi-D, 1/4” Extension Jack Series ......73
Right Angle PC Mount 1/4” Jack Series ................74
Thick Panel/Guitar, Locking 1/4”, Tini, Tini
Extension Jack Series ..............................................75
Micro, 3.5mm Jack Series ......................................76
3.5mm Jack Series..............................................77–79
Phono and Phono Extension Jack Series ..............80
TT or Bantam Jack Series........................................81
MT 1/4” Jack Series..................................................82
Limited Lifetime Warranty
Switchcraft warrants all of its products to be of sound
design, good materials and workmanship at the time of
manufacture.
Switchcraft will repair or replace at its discretion any
product proven to be defective under normal use.
Switchcraft’s liability under the terms of this warranty
is limited to the repair or replacement of defective products
which have not been damaged through accident, abuse,
misuse or unauthorized repair. Switchcraft shall in no
case be liable for special or consequential damages of
any nature.
Plug Series
Littel 1/4”, Right Angle 1/4”, Silent, Super Heavy
Duty Plug Series ......................................................83
Tini, Micro, 3.5mm Stereo, Right Angle 3.5mm
Stereo, Phono, Right Angle Phono Plugs Series ..85
TT or Bantam, Mil-Style 1/4” Plugs Series ............87
Plug Series Dimension Drawings ........................88–93
Littel Plug 1/4” Series ..............................................88
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
33
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
4
Our Patchbays Now Feature the New
Professional Punchdown Terminal (PPT)
Our Patchbays Have Just
Rounded A New Corner
Actually, the corners we rounded
belong to our patchbays’ revolutionary,
new Professional Punchdown Terminal
(PPT), making it perfectly compatible
with the industry standard. We realized
that achieving a new industry standard
meant we couldn’t cut any corners to
get there.
The PPT design incorporates a
split-barrel design and a more rugged,
thicker housing to minimize the
impact of repeated punchdowns.
The split-barrel design eliminates
the problems associated with the
old “V-shaped” terminal designs.
The PPT design distributes pressure
evenly across both sides of the
terminated wire, causing improved
wire retention plus more reliable
connections. The serrated teeth in
the plastic housing firmly grip the
wires, which also greatly improves
wire retention. With the PPT, multiple
wires can be terminated to a single
contact, and a wide range of wire
gauges can be used.
Look for Switchcraft’s PPT in our MTP and TTP Series of audio patchbays, and in our new Backpanel Series.
All Switchcraft audio patchbays incorporate heavy gauge materials and our high quality nickel-plated, steel framed
jacks. Gold-plated, crossbar contacts come standard!
Materials
Housing: Thermoplastic (UL 94V-0)
Contacts: High strength copper alloy, tin plated
Wire size: Accommodates #22, 24, or 26 AWG, stranded or solid
Accessories
Part Number
Description
K459
PPT replacement kit consists of
15 of each color* (IDC/IDC)
K460
PPT replacement kit consists of
15 of each color (IDC/wirewrap)
PT1LA
PPT impact punchdown tool
PT2B
Replacement bit for PT1LA tool
*Colors consist of red, black, white, yellow, blue, and
orange.
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
DIGITAL
AES / EBU
Digital Ready!
MTPH/TTPH Harness Series
Features and Benefits
• Units feature either 48 MT style
jacks or 96 TT style jacks on the
front panels, to a 4 foot harness,
out to a backpanel with PPT’s
• All versions utilize AES/EBU
wiring for complete digital
compatibility
• Attractive, corrosion resistant
nickel-plated, steel frame jacks
• Gold-plated switching contacts
reduce contact resistance,
improve reliability
MTPH48K3NO
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded
contacts
Assembly Screws: Zinc-plated
steel
Welded Contacts: Gold alloy
Panel
Front Channel:
Black anodized aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Thermoplastic
polyester
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: 0˚C to +50˚C
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
Dielectric Withstanding Voltage:
500 VAC at 60 Hz
Working Voltage: 140 VDC maximum
Current Rating: 100 milliamps
The MTPH and TTPH Harness Series utilize standard front panel assemblies, a
4-foot cable harness, and our standard back panel assemblies. Primarily used
where the back panels must either be mounted into a rack, or brought back to the
front for easier access. Custom cable lengths can also be supplied. Contact the
factory for details.
Ordering Information
Type
Part Number of Jack
No. of
Jacks
MTPH48K1NS
MT
48
MTPH48K1NO
MT
48
MTPH48K3NS
MT
48
MTPH48K3NO
MT
48
MTPH48K3SNO
MT
48
TTPH96K1NS
TT
96
TTPH96K1NO
TT
96
TTPH96K3NS
TT
96
TTPH96K3NO
TT
96
Description
1.75" High front panel, 4’ Harness,
3.5" High back panel, normals strapped
1.75" High front panel, 4’ Harness,
3.5" High back panel, normals brought out
3.5" High front panel, 4’ Harness,
3.5" High back panel, normals strapped
3.5" High front panel, 4’ Harness,
3.5" High back panel, normals brought out
3.5" High front panel, 4’ Harness, 3.5" High
back panel, sleeve normals brought out
1.75" High front panel, 4’ Harness,
3.5" High back panel, normals strapped
1.75" High front panel, 4’ Harness,
5.25" High back panel, normals brought out
3.5" High front panel, 4’ Harness,
3.5" High back panel, normals strapped
3.5" High front panel, 4’ Harness,
5.25" High back panel, normals brought out
See Next Page for Mechanical Drawings
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
5
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
6
MTPH/TTPH Harness Series
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
MTPH/TTPH Harness Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
7
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
8
Front Access Series
Features and Benefits
• Easy slide-out tray slides forward
for easy re-termination from the
front of the rack
• Available with either 48 MT style
or 96 TT style jacks in a 1RU
space
• Attractive, corrosion resistant
nickel-plated, steel frame jacks
• Gold-plated switching contacts
reduce contact resistance,
improves reliability
• Extra wide designation strips
for easy channel identification
• Rugged, attractive black
epoxy-finished steel chassis
• Configurations available include
normals strapped and normals
brought out
TTPFA96K1NS
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded
contacts
Assembly Screws: Nickel-plated
steel
Welded Contacts: Gold alloy
Panel
Frame: C.R.S. black epoxy
painted
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Thermoplastic 94V-0
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: -20˚C to +65˚C
The Front Access Series offers the end user the ease of re-terminating patchpoints
from the front of the rack as opposed to the back. A slide out tray allows the user
to slide out the punchdown terminals and reconfigure the unit. An easy release
mechanism on either side of the unit allows it to be pushed back into place and
easy to grip locking nuts tighten the unit in place.
Electrical
Jack Contact Resistance:
30 milliohms initial maximum;
50 milliohms after life
Jack Insulation Resistance:
10,000 megohms maximum
Dielectric Withstanding Voltage:
500V at 60 Hz AC
Working Voltage: 100 milliamps or
less; maximum 56.5 VDC
Ordering Information
Part Number Type of Jack No. of Jacks
Description
TTPFA96K1NS
TT
96
1.75" High, normals strapped
TTPFA96K1NO
TT
96
1.75" High, normals brought out
MTPFA48K1NS
MT
48
1.75" High, normals strapped
MTPFA48K1NO
MT
48
1.75" High, normals brought out
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
Front Access Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
9
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
10
EZ Norm Patchbay Series
TTEZN****0
Center Strip Removes For
Normalling Access
Easily Normal The Jacks By Rotating To “Full”,
“Non,” Or “Half” Positions
The EZ Norm offers a simplified method for setting up and changing
normals to a Bantam/TT patchbay. Simply remove the middle
designation strip, and rotate the center cam, using a standard
screwdriver. An audible “click” can be heard as you rotate from
full normals to no normals to half normals. An opaque marking
strip is included to conceal the normal position, if needed.
Specifications
Materials
Jacks
Housing & Cover: 94V-0 rated thermoplastic
Sleeve Collar: Nickel plated copper alloy
Tip, Ring, Shunt, & Sleeve Springs: Nickel Silver
with welded contacts
Welded Contacts: Gold
Cam Switching Springs: Silver plated copper alloy
Cam Switching Contacts: Silver plated copper alloy
Electrical
Jack Spring Contact Resistance: 30 milliohm
Maximum
Cam Switch Contact Resistance: 30 milliohm
Maximum
Insulation Resistance: 10,000 Megaohms
Dielectric Withstanding Voltage:
500 VAC (rms) at 60 Hz
Insertion Loss: -0.5dB up to 10 MHz
Mechanical
Jack Mechanical Life: 30,000 cycles
Cam Contact Mechanical Life: 30,000 cycles
Insertion - Withdrawal Forces: 1 - 4 lbs.
Moisture resistance: MIL-STD 202 Method 106
Thermal shock: MIL-STD 202 Method 107
Salt spray: MIL-STD Method 101 (48 hrs.)
Vibration: MIL-STD 202 Method 213
EZ Norm Patchbay Options
• 1RU can be terminated to EDAC or Cannon DL,
solder terminals, or wire-wrap terminals
• 1.5RU can be terminated to EDAC/Cannon DL,
solder terminals, wire-wrap terminals, plus 3 pin
connectors, or our own PPT Professional
Punchdown Terminal
• 2RU Same as above
• All units will be offered with or w/o docking connector
• Unwired units will be offered with either cable tie
bar or cable tray
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
EZ Norm Patchbay Series
Racks
The EZ Norm comes in 3 different rack heights, 1RU, 1.5RU, and 2 RU.
Harness Assembly
10
15
20
_
P
_
D
E90
E56
E38
IDC
3PIN
WW
SL
CDL
FA
_
T
B
UNWIRED
PRE WIRED
NO DOCKING
DOCKING CONNECTOR
EDAC/ELCO 90 PIN CONNECTOR
EDAC/ELCO 56 PIN CONNECTOR
EDAC/ELCO 38 PIN CONNECTOR
IDC PPT TERMINALS
3 PIN CONNECTORS
WIRE WRAP PINS
SOLDER LUGS
CANNON DL 96 PIN CONNECTORS
FRONT ACCESS WITH PPT
NO REAR SUPPORT
CABLE TRAY
CABLE BAR
_
P
_
D
E90
E56
E38
IDC
3PIN
WW
SL
CDL
FA
_
T
B
REGULAR UNIT
HARNESS UNIT (UMBILICAL)
1 RACK UNIT HEIGHT
1.5 RACK UNIT HEIGHT
2 RACK UNIT HEIGHT
_
H
10
15
20
}
}
}
EZ-NORM CAM JACKS
EZN
}
TT SIZE JACKS
TT
DIMENSIONS ARE FOR REFERENCE ONLY
UNWIRED ONLY
_
H
}
EZN
}
TT
The EZ Norm is also offered as a
harness assembly, with a standard
harness of 4 ft. Custom lengths are
available, call Switchcraft® for details.
Front Access
The Front Access option offers a
slide-out tray, allowing the end
user to re-terminate the patchbay from the front of the rack.
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
11
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
12
RS 422 Data Patchbay Series
Our standard RS data jackfield series offer a multiple combination of
ports, rack heights, and back panel terminations which will easily fit
into any television broadcast or video production where custom data
patching is required. Custom ports and rack height combinations can
be supplied. Contact the factory for details.
Ordering Information
Part
Number*
No. of
Jacks
RS422H4N081
2x8
RS422V4N081
2x8
RS422H4N161
2 x 16
RS422H4N162
2 x 16
RS422V4N161
2 x 16
RS422V4N162
2 x 16
RS422H4N242
2 x 24
RS422V4N242
2 x 24
RS422V4N322
2 x 32
*Add “N” for non-normalled
Front Panel
Layout
Back
Plane
Horizontal
Vertical
Horizontal
Horizontal
Vertical
Vertical
Horizontal
Vertical
Vertical
version
9
9
9
9
9
9
9
9
9
Pin
Pin
Pin
Pin
Pin
Pin
Pin
Pin
Pin
D-Sub
D-Sub
D-Sub
D-Sub
D-Sub
D-Sub
D-Sub
D-Sub
D-Sub
Rack
Height
1
1
1
2
1
2
2
2
2
Features and Benefits
• Unit Features either 8,16, 24, or 32 TT style
jacks on the front Panels, to a 9 pin D-Sub.
• All versions utilize low capacitance internal
wiring for maximum performance of
transferring data
• All standard units are available 1 or 2 rack
units high (1.5 RU available by request)
• Rugged, attractive black epoxy finished
steel frame chassis
Specifications
Electrical
Internal Wiring:
24 AWG Solid TC, foils shield
Nom Capacitance: 11.5 pF/ft between conductors
21.3 pF/ft between one conductor and conductor
connected to the shield
Nom. Impedence: 110 Ohms
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
RS 422 Data Patchbay Series
RS422V4N322
32 Vertical Paired Jacks
Front and Back Views
RS422H4N242
24 Horizontal Paired Jacks
Front and Back Views
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
13
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
14
DIGITAL
AES / EBU
Digital Ready!
MTP48K Wired Series
Features and Benefits
• Unit features 48 MT style jacks
in either 1RU (1.75" H) or 2RU
(3.5" H) spaces
• All versions utilize AES/EBU
wiring for complete digital
compatibility
• Attractive, corrosion resistant
nickel-plated, steel frame jacks
• Gold-plated switching contacts
reduce contact resistance,
improve reliability
• Rugged, attractive black epoxyfinished steel chassis
• Extra wide designation strips for
easy channel identification
• 1RU version configurations include
normals strapped and normals
brought out
• 2RU version configurations include
normals strapped, normals
brought out, and sleeve normals
brought out
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded
contacts
Assembly Screws: Zinc-plated
steel
Welded Contacts: Gold alloy
Panel
Front Channel:
Black anodized aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Thermoplastic
polyester
MTP48K3NO
The MTP Series was developed with the AES/EBU digital standard in mind.
All versions are made with 110 Ohm cabling inside as a standard. Available in
a wide variety of configurations.
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: O˚C to +50˚C
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
Dielectric Withstanding Voltage:
500 VAC at 60 Hz
Working Voltage: 140 VDC
maximum
Current Rating: 100 milliamps
Ordering Information
Part Number Type of Jack No. of Jacks
Description
MTP48K1NS
MT
48
1.75" High, normals strapped
MTP48K3NS
MT
48
3.5" High, normals strapped
MTP48K1NO
MT
48
1.75" High, normals brought out
MTP48K3NO
MT
48
3.5" High, normals brought out
MTP48K3SNO
MT
48
3.5" High, sleeve normals out
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
MTP48K Wired Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
15
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
16
DIGITAL
AES / EBU
Digital Ready!
TTPW96K Wired Series
Features and Benefits
• Unit features 96 TT style jacks in
2RU (3.5"H) space
• Utilizes AES/EBU wiring for
complete digital compatibility
• Attractive, corrosion resistant
nickel-plated, steel frame jacks
• Gold-plated switching contacts
reduce contact resistance, improve
reliability
• Rugged, attractive black epoxyfinished steel chassis
• Extra wide designation strips for
easy channel identification
TTPW96K3NS
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs: Nickel
silver with welded contacts
Assembly Screws: Zinc-plated
steel
Welded Contacts: Gold alloy
Panel
Front Channel:
Black anodized aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Thermoplastic
polyester
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: 0˚C to +50˚C
The TTPW96K Series was developed with the AES/EBU digital standard in mind.
As a standard, the TTPW96K utilizes 110 Ohm cabling inside.
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
Dielectric Withstanding Voltage:
500 VAC at 60 Hz
Working Voltage: 140 VDC
maximum
Current Rating: 100 milliamps
Ordering Information
Part Number Type of Jack No. of Jacks
Description
TTPW96K1NN
TT
96
1.75" High, non-normals
TTPW96K1HN
TT
96
1.75" High, half normals
TTPW96K1NS
TT
96
1.75" High, normals strapped
TTPW96K3NN
TT
96
3.5" High, non-normals
TTPW96K3HN
TT
96
3.5" High, half normals
TTPW96K3NS
TT
96
3.5" High, normals strapped
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
TTPW96K Wired Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
17
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
18
MTPBP/TTPBP Backpanel Series
Features and Benefits
• Allows for custom patchbay
configurations or central
patching points
• PPTs have IDCs on both sides
for easy installation
• Rugged, attractive black
epoxy-finished steel chassis
• Cable trays allow for mounting
and securing terminated cable
MTP48K3BPNS
Specifications
Panel thickness: .093"
Mounting hole diameter: .187"
Mounting hole spacing (48
IDCs/row): .340" (Horizontal)
x .275" (Vertical)
Mounting hole spacing (52
IDCs/row): .320" (Horizontal)
x .275" (Vertical)
Wire size: #22, 24, 26 AWG
Stranded or Solid
(IDC termination)
Materials
Housing: Thermoplastic (UL 94V-0)
Contacts: High strength copper
alloy
Backpanels: Black Epoxy coated
C.R.S.
Cable Tray: Black Epoxy coated
C.R.S.
The Backpanel Series offers the end user the flexibility of configuring their own
patchbay, or to use as a central patchpoint location. The backpanels utilize the
PPT punchdown and come with a rugged cable tray.
Ordering Information
Sets of
Part Number
PPT Terminals
Height
Description
MTP48K3BPNS
48
3.5"
T, R, S
MTP48K3PBNO
48
3.5"
T, R, S, TN, RN
MTP52K3BPNO
52
3.5"
T, R, S, TN, RN
24 x 2
7.0"
+, -, S
TTP96K3BPNS
96
3.5"
T, R, S
TTP96K5BPNS
96 x 2
5.25"
T, R, S, TN, RN
MTP24K7
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
MTPBP/TTPBP Backpanel Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
19
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
20
TT96 EDAC Series
Features and Benefits
• Attractive, corrosion-resistant,
nickel-plated jacks
• Steel frame jacks for superior
jack life
• Extra wide labeling strips provide
maximum space and two vertical
strips, one at each side
• Rugged, attractive black anodized
aluminum face will not break
• Two configurations available:
- Normals brought out
- Normaled at jacks
• Gold switching contacts for
long-term reliability
• Jacks paired for easy identification
of left and right channels
• Connectorized by EDAC®
connectors for ease of termination
by customer
TT96EDACNS
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs: Nickel
silver with welded contacts
Assembly Screws: Zinc-plated
steel
Welded Contacts: Gold alloy
Panel
Front Channel: Black anodized
aluminum
Frame & Cover: C.R.S. black
epoxy painted
Designation Strips: Black polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Polyester
EDAC Connector
Housing: Thermoplastic, UL94V-0
Contacts: Gold plated phosphor
bronze
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: -20˚C to +65˚C
The TT96EDAC Series offers the convenience of EDAC® connectors on the back of
the panel for easy installation. Available in normals strapped and normals
brought out, both wired to the SAC code of wiring. We also offer custom wiring
configurations. Contact the factory for details.
EDAC Mating Plugs
Part Number Description
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance:
10,000 megohms
Dielectric Withstanding Voltage:
500VAC at 60 Hz
Working Voltage: 140VDC
Current Rating: 100 milliamps
516-090-000-301
90 Pin male w/ screw
516-090-000-302
90 Pin male w/ nut
516-120-000-101
120 Pin male w/ screw
516-120-000-102
120 Pin male w/ nut
516-290-500
Terminal solder-style
516-290-590
Terminal crimp-style
Ordering Information
Part Number Type of Jack No. of Jacks
Description
TT96EDACNO
TT
96
Normals Brought Out (120 pin EDAC)
TT96EDACNS
TT
96
Normals Strapped (90 pin EDAC)
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
TT96 EDAC Series
JACK #1 FOR INPUT AND OUTPUT
#1 THROUGH #24, AND
JACK #25 FOR INPUT AND
OUTPUT #25 THROUGH #48
JACK #2 FOR INPUT AND OUTPUT #1 THROUGH #24, AND
JACK #26 FOR INPUT AND OUTPUT #25 THROUGH #48
Standard Audio Configuration Wiring (S.A.C.)
90 Pin Plug Connector
(Normals at jacks)
DIMENSIONS ARE FOR REFERENCE ONLY
Standard Audio Configuration Wiring (S.A.C.)
120 Pin Plug Connector
(Normals brought out)
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
21
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
22
TTP96K Patchkit Series
Features and Benefits
• Kit features 96 TT jacks in one
rack space (1.75" high) or two
rack spaces (3.5" high)
• Jack blocks can be removed from
the front for easy soldering
• Dust tray limits dirt, dust and
contamination of jack terminals
• Wire management straps are
adjustable and reusable
• Attractive, corrosion resistant
nickel-plated jacks
• Steel frame jack for superior
jack life
• Extra wide labeling strips provide
maximum space
• Rugged, attractive black anodized
aluminum face will not break
or rust
• Three jack configurations available
for the exact switching arrangement
you need: full normal, half normal,
and non-normal (open circuit)
• Fanned solder terminals for easier
solder connections
• Gold switching contacts for longterm reliability in normal-through
connections
Specifications
Materials
Jacks
Frame: Nickel-plated steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded
contacts
Assembly Screws: Nickel-plated
steel
Welded Contacts: Gold alloy
Panel
Front Channel: Black anodized
aluminum
Frame: C.R.S. black epoxy painted
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Jack Inserts: Thermoplastic
polyester
TTP96K1FN
The TTP96K Patchkit Series offers the end user a rugged cable tray to support
rear cabling. Heavy duty construction takes weight off the back of the jacks for
increased reliability. Available in 1.75" or 3.5" height versions.
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: 0˚C to +50˚C
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance:
10,000 megohms maximum
Dielectric Withstanding Voltage:
500VAC at 60 Hz
Working Voltage: 140VDC maximum
Current Rating: 100 milliamps
Ordering Information
Part Number Type of Jack No. of Jacks
Description
TTP96K1FN
TT
96
1.75" High, full normals
TTP96K1HN
TT
96
1.75" High, half normal
TTP96K1NN
TT
96
1.75" High, no normals
TTP96K3FN
TT
96
3.5" High, full normals
TTP96K3HN
TT
96
3.5" High, half normals
TTP96K3NN
TT
96
3.5" High, no normals
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
TTP96K Patchkit Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
23
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
24
MT48K/MT52K Patchkit Series
Features and Benefits
• Kit features 48 1/4" longframe
jacks in one rack space (1" high)
or in two rack spaces (3" high) or
52 1/4" longframe jacks in one
rack space (1" high)
• Allows user to add cable and
termination panel
• Removable jack panel from the
front allows easy soldering of
wire connections
• Jacks have gold switching
contacts
• Fanned solder terminals for easier
soldering
• Offset ground lugs allow easy
bussing of ground with one wire
• Jacks have a nickel-plated frame
and assembly screws
• Wire management straps are
reusable and adjustable
Specifications
Materials
Jacks
Frame: Stamped nickel-plated
steel
Bushing: Nickel-plated brass
Tip, Ring and Shunt Springs:
Nickel silver with welded
contacts
Assembly Screws: Nickel-plated
steel
Welded Contacts: Gold alloy
Panel
Front Panel: Thermoplastic
Frame: C.R.S. black epoxy paint
Designation Strips: Black
polycarbonate 94V-0
Designation Strip Covers: Clear
polycarbonate
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: 0˚C to +50˚C
MT52K1FN
The MT48/52K Patchkit Series offers the end user a rugged cable tray to support
rear cabling. Heavy duty construction takes weight off the back of the jacks for
increased reliability. Available in 1.75" or 3.5" height versions.
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
Dielectric Withstanding Voltage:
500VAC at 60 Hz
Working Voltage: 140VDC
maximum
Current Rating: 100 milliamps
Ordering Information
Part Number Type of Jack No. of Jacks
Height
Description
MT48K1NS
MT
48
1.75"
MT48K1FN
MT
48
1.75"
Normals strapped
Full normals
MT48K1HN
MT
48
1.75"
Half normals
MT48K1NN
MT
48
1.75"
No normals
MT52K1NS
MT
52
1.75"
Normals strapped
MT52K1FN
MT
52
1.75"
Full normals
MT52K1HN
MT
52
1.75"
Half normals
MT52K1NN
MT
52
1.75"
No normals
MT48K3FN
MT
48
3.5"
Full normals
MT48K3HN
MT
48
3.5"
Half normals
MT48K3NN
MT
48
3.5"
No normals
MT52K3FN
MT
52
3.5"
Full normals
MT52K3HN
MT
52
3.5"
Half normals
MT52K3NN
MT
52
3.5"
No normals
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
MT48K/MT52K Patchkit Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
25
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
26
MT48/MT52 Patchbay Series
Features and Benefits
• Units feature either 48 or 52
MT Jax®
• Steel frame jacks for superior
jack life
• Attractive, corrosion resistant
nickel-plated jacks
• Gold switching contacts for
long-term reliability in normalthrough connections
• Offset ground terminal for ease
in making common ground buss
connections
• Fanned solder terminals for
easier solder connections
• Cable tie bar takes the weight
of cables off the jacks
• Four jack configurations
available for the exact switching
arrangement: full normal, half
normal, non-normal, and
normals strapped
MT48FN
The MT48/52 Series patchbays offer a rugged cable tie bar to support rear
cabling. Also available is the normals strapped configuration which has the shunts
or normals tied together, top to bottom jacks.
Specifications
Materials
Jacks
Frame: Steel, nickel-plated
Bushing: Brass, nickel-plated
Springs: Nickel silver, solder lugs
Ground Terminal: Nickel silver,
solder lugs
Switching Contacts: Welded,
gold alloy
Insulation: Phenolic spacers, rigid
PVC tubing through stack
Screws: Steel, nickel-plated
Panel
Jack Panel: Thermoplastic
Cable Support Bracket: 5/16"
diameter black epoxy painted
steel rod
Screws (designation strip): Steel,
black zinc-plated
Screws (mounting jack): Steel,
nickel plated
Kwik-change® Designation Strip:
Extruded aluminum, black anodized
Marking Strip:
White plastic, matte finish
Marking Strip Cover:
Clear, extruded plastic
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Operating: 0˚C to +50˚C
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
Dielectric Withstanding Voltage:
500VAC at 60 Hz
Working Voltage: 140VDC
maximum
Current Rating: 100 milliamps
Ordering Information
Part Number
Type of Jack
No. of Jacks
Description
MT48FN
MT
48
Full normals
MT48HN
MT
48
Half normals
MT48NN
MT
48
No normals
MT48NS
MT
48
Normals strapped
MT52FN
MT
52
Full normals
MT52HN
MT
52
Half normals
MT52NN
MT
52
No normals
MT52NS
MT
52
Normals strapped
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
MT48/MT52 Patchbay Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
27
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
28
TTP96AS Patchbay Series
Features and Benefits
• Unit features 96 TT jacks
• Attractive, corrosion resistant
nickel-plated jacks
• Steel frame jack for superior
jack life
• Extra wide labeling strips provide
maximum space
• Rugged cable tie bar takes the
weight of cables off the jacks
• Rugged, attractive black anodized
aluminum face will not break
• Three jack configurations available
for the exact switching arrangement
you need: full normal, half normal,
and open circuit panel
• Fanned solder terminals for easier
solder connections
• Offset ground terminal for ease in
making common ground buss
connections
• Gold switching contacts for
long-term reliability in normalthrough connections
Specifications
Materials
Jacks
Frame: Steel, nickel-plated
Bushing: Nickel-plated copper alloy
Springs: Copper alloy solder lugs
Ground Terminal: Steel, tin
electrodeposited
Switching Contacts: Welded, gold
alloy inlay over palladium base
Insulation: Rigid plastic spacers,
rigid PVC tubing through stack
Screws: Steel, plated
Panel
Frame: Black anodized aluminum
Inserts: Polyester, glass filled,
94V-0
Cable Support Bar: Cold rolled
steel, nickel-plated
Designation Strips: Thermoplastic,
94V-0
TTP96ASFN
The TTP96AS Series of patchbays offer a rugged cable tie bar to support
rear cabling.
Designation Strip Covers: Clear
thermoplastic, SE-1
Marking Strip: Rigid vinylite
Jack Mounting Screws: Steel, plated
Screws: Steel, black plated
Mechanical
Life: 30,000 cycles
Insertion Force: 7 lbs. maximum
Withdrawal Force: 1 lb. minimum
Environmental: 0˚C to +50˚C
Ordering Information
Part Number
Type of Jack
Electrical
Contact Resistance: 30 milliohms
maximum initial
Insulation Resistance: 10,000
megohms maximum
Dielectric Withstanding Voltage:
500VAC at 60 Hz
Working Voltage:
140VDC maximum
Current Rating: 100 milliamps
No. of Jacks
Description
TTP96ASFN
TT
96
Full normals
TTP96ASHN
TT
96
Half normals
TTP96ASNN
TT
96
No normals
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
TTP96AS Patchbay Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
29
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
30
HPC Patchbay Series
Features and Benefits
• Available in 1RU or 2RU versions
• Available with or without connectors
• HPC Series connectors are
compatible with Neutrik Speakon®
connectors
• Cable tie bar takes weight of the
cables off the terminations
• Rugged aluminum channel
• Silk-screen designation area makes
it easy to re-label channels
Panel Materials
Housing: Thermoplastic UL
94V-0 rated
Contacts: Silver-plated over
copper alloy
Frame: Aluminum, black anodized
Cable Tie Bar: Steel, black epoxy
HP Connector Specifications
Mechanical
Shock: Per Mil-Std 202,
Method 213B, Cond. K
Vibration: Mil-Std 202,
Method 201A
Life: 1,000 rotational cycles
Cable Range (cord mount): 10AWG,
0.560" cable OD maximum
Electrical
Voltage Rating: 1,500 AC RMS,
per Mil-Std 202, Method 301
Current Rating (Faston® terminals):
50A RMS w/10AWG wire,
normal ambient, per UL 1977
Current Rating (PC terminals):
30A per UL 1977
Contact Resistance: 1m1, 1.5m1
after 1,000 insertion/withdrawals
Insulation Resistance: .2T1
Environmental
Salt Spray: Mil-Std 202, Method
101D, Cond.B
Thermal Shock: Mil-Std 202,
Method 107G
Temperature Limits: -55˚C to +85˚C
Moisture Resistance: Mil-Std 202,
Method 106E
Life @ Ambient Temperature:
Mil-Std 202, Method 108A
Touchproof: IEC 65 and 1010-1
IP Rating: IEC 529, IP 25
HPCPK324F
The HPC Patchbay features a 19" rack unit loaded with HPC Series connectors.
Available with either 0.250" Faston® terminals or 0.187" Faston® terminals. One
rack unit height versions come with 12 HPC connectors, two rack unit height
versions come with 24 HPC connectors. All versions have a rugged cable tie bar,
which takes the weight of the cabling away from the connections.
Materials
Housings: Thermoplastic
UL 94V-0 rated
Seal Rings: Thermoplastic rubber
Contacts: Silver-plated over
copper alloy
Ordering Information
Part Number
Height
HPCPK112F
HPCPK112F1
HPCPK1B
HPCPK324F
HPCPK324F1
HPCPK3B
1.75"
1.75"
1.75"
3.50"
3.50"
3.50"
Description
12 connectors,
12 connectors,
Blank panel
24 connectors,
24 connectors,
Blank panel
0.250" Fastons
0.187" Fastons
0.250" Fastons
0.187" Fastons
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
HPC Patchbay Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
31
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
32
Q-G® Patchbay Series
Features and Benefits
• Available in 1RU or 2RU versions
• Available with or without the
connectors
• E Series connectors are silver-plated,
3 pins/contacts with black finish
• Cable tie bar takes the weight
of the cables off the solder
terminations
• Rugged aluminum channel
increases durability
• Silk-screen designation area
makes it easy to re-label channels
QGPK332MFB
Specifications
Materials
Connectors
Housing: Die-cast, black velvet finish
Inserts: Glass-filled thermoplastic
Pin/Contacts: Copper alloy,
silver-plated
Latch Release: Steel, nickel-plated
Insert Locking Cam: Die-cast zinc
Frame
Aluminum, black anodized
Cable Tie Bar
Steel, black epoxy
The QG® Patchbay features a 19" rack unit loaded with E Series QG® connectors.
These XLR’s have the same panel cut-out, male or female, silver-plated pins or
contacts, and a black finish. All connectors have solder cup terminals for easy
soldering and the inserts are removable from the back, allowing for easy changes.
The one rack unit height version comes with 16 male, or 16 female, or 8 male
and 8 female connectors. The two rack unit version comes with 16 male and 16
female connectors. We also offer the unit without connectors, but with the panel
cut-outs already punched out.
All versions have a rugged cable tie bar, which takes the weight of the
cabling away from the solder connections.
Ordering Information
Part Number
Height
Description
QGPK116FB
1.75"
16 female
QGPK116MB
1.75"
16 male
QGPK18M8FB
1.75"
8 male, 8 female
QGPK332MFB
3.5"
16 female( top), 16 male (bottom)
QGPK1B
1.75"
Blank panel
QGPK3B
3.5"
Blank panel
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
Q-G® Patchbay Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
33
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
34
VPP Video Patchbay Series
Features and Benefits
• HD Series rated from DC to
3.0 GHz
• SD Series has a bandwidth from
DC to 1.75GHz
• Black thermoplastic modules
insulate jacks from chassis
• Jacks feature rugged heavy duty
housings
VPP24K3HD75T
VJHD*75TX
Video Jack Specifications
Electrical
Rated Bandwidth: 3.0 GHz (HD),
1.75 GHz (SD)
Characteristic Impedance:
75 ohms
Return Loss: Better than –15 dB
Insertion Loss: Better than –.5 dB
Contact Resistance: Less than 20
milliohms
Termination Resistance:
75 W, ±1%
Center Conductor: Accepts .090
pin diameter
Mechanical
Mechanical Shock: Per MIL-STD202, Method 213, Test condition I
Vibration: Per MIL-STD-202,
Method 201
Life Cycle: 30,000
Materials
Housing: Zinc alloy, nickel plated
Center Contacts: Copper alloy,
gold plated
Switching Springs: Copper alloy,
gold plated
Grounding Contacts:
HD Series - Copper alloy, gold
plated
SD Series - Copper alloy, nickel
plated
Insulators: Thermoplastic,
UL 94V-0 rated
Environmental
Operating Temperature:
– 40°C to 65°C
Storage Temperature:
– 55°C to 85°C
Thermal Shock:
Per MIL-STD-202, Method 107
Moisture and Humidity:
Per MIL-STD-202, Method 106
The VPP Series video patchbays offer a wide variety of options for video patching.
The HD Series meets SMPTE 292M specifications for high definition video signaling,
covering a bandwidth range from DC to 3.0GHz. The SD Series is perfect for serial
digital, with a bandwidth from DC to 1.75GHz. Both come in either terminated or
non-terminated, 24 or 26 jacks, 1.75" or 3.5" heights.
Ordering Information
Part Number Type of Jack
No. of Jacks
Height
Description
VPP24K1HD*75T
HD
24
1.75"
Terminated
VPP24K1HD*NT
HD
24
1.75"
Non-term
VPP24K1SD*75T
SD
24
1.75"
Terminated
VPP24K1SD*NT
SD
24
1.75"
Non-term
VPP26K1HD*75T
HD
26
1.75"
Terminated
VPP26K1HD*NT
HD
26
1.75"
Non-term
VPP26K1SD*75T
SD
26
1.75"
Terminated
VPP26K1SD*NT
SD
26
1.75"
Non-term
VPP24K3HD*75T
HD
24
3.5"
Terminated
VPP24K3HD*NT
HD
24
3.5"
Non-term
VPP24K3SD*75T
SD
24
3.5"
Terminated
VPP24K3SD*NT
SD
24
3.5"
Non-term
VPP26K3HD*75T
HD
26
3.5"
Terminated
VPP26K3HD*NT
HD
26
3.5"
Non-term
VPP26K3SD*75T
SD
26
3.5"
Terminated
VPP26K3SD*NT
SD
26
3.5"
Non-term
* Add “N” for non-normalled version
See Page 36 for Individual Jacks Ordering Information
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
VPP Video Patchbay Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
35
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
36
VPP Video Patchbay Series
SMITH CHART (TYPICAL)
Ordering - Individual Jacks
Part Number Type
Description
VJHD*75TX
HD
Terminated
VJHD*NTX
HD
Non-terminated
VJSD*75TX
SD
Terminated
VJSD*NTX
SD
Non-terminated
* Add “N” for non-normalled version
75 Ohms
START 30 kHz
STOP 3.0 GHZ
RETURN LOSS (TYPICAL)
INSERTION LOSS (TYPICAL)
0
R
E
T
U
R
N
L
O
S
S
G
O
O
D
-5
-10
-15
I
N
S
E
R
T
I
O
N
-20
L
O
S
S
-25
-30
(dB)
0
-1
-2
-3
G
O
O
D
-4
-5
(dB)
-35
0
600
1200
1800
FREQUENCY (MHz)
2400
3000
0
600
1200
1800
FREQUENCY (MHz)
2400
3000
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
MVP Midsize Video Patchbay Series
Features and Benefits
• Midsize video jacks rated from
DC to 3 GHz
• 32 midsize jacks mounted either
1RU, 1.5RU or 2RU panel
• Available in terminated or
non-terminated configurations
MVP32K3*75T
Specifications
Materials
Frame: Aluminum, black anodized
Designation Strips: Vinylite, white
Designation Strip Covers: Lexan,
transparent
Jack Inserts: Thermoplastic,
UL 94V-0 rated
MVJ*75T
Midsize Video Jack
Specifications
The MVP Series video patchbays offer outstanding performance and high density.
Patchbays consist of 32 jacks in either 1RU or 2RU heights, jacks come either
terminated or non-terminated. These jacks are rated from DC to 3 GHz, and are
rated at 30,000 lifecycles. The 1.5RU and 2RU come with cable tie bars.
Electrical
Rated Bandwidth: 3.0 GHz
Characteristic Impedance:
75 ohms
Return Loss: See Typical Return
Loss Chart
Insertion Loss: See Typical
Insertion Loss Chart
Contact Resistance:
Less than 20 milliohms
Termination Resistance:
75 W, ±1%
Center Conductor: Accepts .048
pin diameter
Mechanical
Mechanical Shock: Per MIL-STD202, Method 213, Test condition I
Vibration: Per MIL-STD-202,
Method 201
Life Cycle: 30,000
Materials
Housing: Zinc alloy, nickel plated
Center Contacts: Copper alloy,
gold plated
Switching Springs: Copper alloy,
gold plated
Grounding Contacts: Copper
alloy, gold plated
BNC Insulators: Teflon
Actuators: Thermoplastic,
UL94V-0 rated
Environmental
Operating Temperature:
– 40°C to 65°C
Storage Temperature:
– 55°C to 85°C
Thermal Shock:
Per MIL-STD-202, Method 107
Moisture and Humidity:
Per MIL-STD-202, Method 106
Ordering Information
Part Number
Type of Jack
Height
Description
MVP32K1*75T
Midsize
1.75"
Terminated
MVP32K1*NT
Midsize
1.75"
Non-terminated
MVP32K2*75T
Midsize
2.62"
Terminated
MVP32K2*NT
Midsize
2.62"
Non-terminated
MVP32K3*75T
Midsize
3.5"
Terminated
MVP32K3*NT
Midsize
3.5"
Non-terminated
* Add “N” for non-normalled version
See Page 39 for Individual Midsize Jacks Ordering Information
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
37
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
38
MVP Midsize Video Patchbay Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
MVP Midsize Video Patchbay Series
SMITH CHART (TYPICAL)
Ordering - Individual Midsize Jacks
Part Number
Type
Description
MVJ*75T
HD
Terminated
MVJ*NT
HD
Non-terminated
* Add “N” for non-normalled version
75 Ohms
START 30 kHz
INSERTION LOSS (TYPICAL)
RETURN LOSS (TYPICAL)
0
R
E
T
U
R
N
L
O
S
S
I
N
S
E
R
T
I
O
N
G
O
O
D
-5
-10
-15
-20
-30
L
O
S
S
-35
(dB)
-25
(dB)
0
600
1200
1800
STOP 3.0 GHZ
2400
0
-1
-2
-3
G
O
O
D
-4
-5
3000
0
FREQUENCY (MHz)
600
1200
1800
2400
FREQUENCY (MHz)
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
3000
39
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
40
VAP Video/Audio Patchbay Series
Features and Benefits
• Combines 13 video jacks and
26 long-frame audio jacks into
one patchbay
• Available with either HD Series
or SD Series video jacks
• All audio jacks are nickel-plated
with steel frames and gold-plated
switching contacts
• Audio modules consist of 4
YMT334BN jacks, video modules
consist of 2 dual video jacks
VAPK3HD*75T
VJHD*75TX
Video Jack Specifications
Electrical
Rated Bandwidth: 2.4 GHz (HD),
1.75 GHz (SD)
Characteristic Impedance: 75 ohms
Return Loss: Better than –15 dB
Insertion Loss: Better than –.5 dB
Contact Resistance: Less than 20
milliohms
Termination Resistance: 75 W, ±1%
Center Conductor: Accepts .090
pin diameter
Mechanical
Mechanical Shock: Per MIL-STD202, Method 213, Test condition I
Vibration: Per MIL-STD-202,
Method 201
Life Cycle: 30,000
Materials
Housing: Zinc alloy, nickel plated
Center Contacts: Copper alloy,
gold plated
Switching Springs: Copper alloy,
gold plated
Grounding Contacts:
HD Series - Copper alloy,
gold plated
SD Series - Copper alloy,
nickel plated
Insulators: Thermoplastic,
UL 94V-0 rated
See Page 36 For Video Jack
Ordering Information and
Page 69 For Audio Jack
Ordering Information
The VAP Series combines audio and video in one convenient patchbay. Standard
versions consist of 13 video jacks and 26 long-frame audio jacks into one unit.
Options include HD Series video jacks which are rated from DC to 2.4GHz or SD
Series rated from DC to 1.5GHz. Both come in either terminated or non-terminated
jacks. The MT Style audio jacks all have nickel-plated steel frames and gold-plated
switching contacts. Flared terminals make soldering easier. All audio jacks are
T,R,S, TN, and RN. Individual modules are useful for custom configurations.
Environmental
Operating Temperature: – 40°C to
65°C
Storage Temperature: – 55°C to
85°C
Ordering Information
Part Number
Type of Jack
VAPK1HD*75T
VAPK1HD*NT
VAPK1SD*75T
VAPK1SD*NT
VAPK3HD*75T
VAPK3HD*NT
VAPK3SD*75T
VAPK3SD*NT
HD
HD
SD
SD
HD
HD
SD
SD
Thermal Shock: Per MIL-STD-202,
Method 107
Moisture and Humidity: Per
MIL-STD-202, Method 106
Height
Description
1.75"
1.75"
1.75"
1.75"
3.5"
3.5"
3.5"
3.5"
Terminated
Non-terminated
Terminated
Non-terminated
Terminated
Non-terminated
Terminated
Non-terminated
Modules
VMAFN
MT Style
VMVHD*75T
HD
VMVHD*NT
HD
VMVSD*75T
SD
VMVSD*NT
SD
* Add “N” for non-normalled version
4- YMT334BN jacks
2- HD terminated jacks
2- HD non-terminated jacks
2- SD terminated jacks
2-SD non-terminated jacks
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
VAP Video/Audio Patchbay Series
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
41
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
42
MVEZN Audio/Midsize Patchbay Series
Features and Benefits
• Combines 16 midsize video jacks
and 24 dual EZ Norm bantam jacks.
• Video jacks are rated from DC
to 3.0 GHZ.
• Rugged, attractive anodized aluminum
frame for increased reliability.
• All audio jacks utilize EZ Norm
technology for easy normal
reconfiguration. A simple twist
of the normal cam changes the
normal function from full, to half,
to no normals.
• Cable tie bar removes weight off
the rear terminations.
• Large designation strips for easy
patch point identification.
Video Jack Specifications
See page 39 for details
Audio Jack Specifications
MVEZNPK175T
The MVEZN Series combines our popular MVJ midsize video jacks with our latest
bantam jack, the EZ Norm. This patchbay has 16 video jacks and 24 dual EZ Norm
bantam jacks. Perfect for application where a full video and audio patchbay are
unnecessary. The video jacks are rated up to 3.0GHz, and the audio jacks meet
30,000 cycles, both in insertion/withdrawals and with the normal cam.
See page 10 for details
Part Number: MVEZNPK175T
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
* Please visit the product pages on our website for the most up-to-date product information
PATCHBAYS
MBPK Video/Audio Patchbay Series
Features and Benefits
• Combines 16 midsize video jacks
and 48 TT bantam audio jacks.
• Video jacks are rated from DC to
3.0 GHZ.
• All audio jacks are nickel-plated with
steel frames and gold-plated crossbar switching contacts.
• Rugged, attractive anodized aluminum
frame for increased reliability.
• Large designation strips for easy
patch point identification.
• Audio jacks rated at 30,000 cycles.
MBPK175T
Video Jack Specifications
See page 39 for details
The MBPK Series combines our popular MVJ midsize video jacks with our
standard nickel-plated, steel frame audio jacks. This patchbay combines 16
midsize video jacks with 48 TT bantam audio jacks. Perfect for applications
where a full video and audio patchbay are unnecessary. The video jacks are rated
up to 3.0GHz, and the audio jacks meet 30,000 cycles. The audio jacks have T,
R, S, TN, and RN terminals, and feature gold-plated contacts and flared solder
terminals.
Audio Jack Specifications
See page 69 for details
Materials
Frame: Aluminum, black anodized
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
43
* Please visit the product pages on our website for the most up-to-date product information
PATCHCORDS/MOLDED CABLES
44
Audio and Video Patchcords
Features and Benefits - Audio
• 110 ohm impedance-matched
digital patchcords meet AES/EBU
interface standards for digital
patching
• Available with a variety of plug
terminations, plug finishes, cord
lengths and cable colors, the
patchcords offer design flexibility
• Premium quality cable insures high
reliability and greater flexibility
VP1BK
20Q
18Q
TT740
TT1BK
TT120
Specifications
Standard plug terminations are
single 3-conductor 1/4" and TT®
Nickel-plated plugs (standard),
brass and gold-plated (optional)
Cable jacket material is PVC.
Black is standard with other
colors available
Features and Benefits - Video
• Designed and built to highest
quality standards for efficient
video signal transmission
• Cable type is RG59 (75W)
• Rugged nickel-plated handles
with knurled area for positive
finger grip
• Available in standard size or
midsize styles
A wide variety of audio patchcords
and molded cable assemblies are
available. Some of the more popular
versions are the 18Q and 20Q Series
for professional 1/4" patching, the
TT* and TTD Series for TT or bantam
AES/EBU digital patching. The VP
and VMP Series offer exceptional
performance for video signal patching.
MD6
MD3
Ordering Information
Video Patchcords
Part Number
Type
Part Number
Type
VP3**
Standard
VMP2**
Midsize
Specifications
VP4**
Standard
VMP3**
Midsize
Materials
Housing: Nickel-plated,
copper alloy
Contact Pin: Gold-plated,
copper alloy
Boot: Thermoplastic, in black
and colors
VP5**
Standard
VMP4**
Midsize
VP6**
Standard
VMP5**
Midsize
VP7**
Standard
VMP6**
Midsize
VP8**
Standard
VMP7**
Midsize
VP9**
Standard
VMP8**
Midsize
VP10**
Standard
VMP9**
Midsize
VSPP
Standard
VMP10**
Midsize
VMP1**
Midsize
VMPP
Midsize
When ordering, add the following for cable color: BK-Black, BL-Blue, R-Red, O-Orange,
Y-Yellow, GN-Green, P-Purple, GY-Gray
* Please visit the product pages on our website for the most up-to-date product information
PATCHCORDS/MOLDED CABLES
Audio and Video Patchcords
Ordering Information
Part Number Type
Plug Finger
Ordering Information
Part No.
Description
Description
Molded MIDI Cables
Audio Patchcords
18QD18
18QF18
18QH18
20QD20N*
20QF20N*
20QH20N*
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
Mil-Type
Mil-Type
Mil-Type
Mil-Type
Mil-Type
Mil-Type
Brass
Brass
Brass
Nickel
Nickel
Nickel
2
3
4
2
3
4
foot,
foot,
foot,
foot,
foot,
foot,
black nylon jacket
black nylon jacket
black nylon jacket
nylon jacket
nylon jacket
nylon jacket
When ordering, add the following for cable color: 0-Black, 2-Red,
5-Green, 6-Blue
MD3
3 foot, 5 pin DIN, molded black
MD6
6 foot, 5 pin DIN, molded black
MD10
10 foot, 5 pin DIN, molded black
MD15
15 foot, 5 pin DIN, molded black
Uses 4 cond., 24 awg, PVC outer jacket,
braided shielded cable
1/4" Cables
TT122
TT124
TT126
TT127
TT128
TT
TT
TT
TT
TT
or
or
or
or
or
Bantam
Bantam
Bantam
Bantam
Bantam
Brass
Brass
Brass
Brass
Brass
1
2
3
4
5
foot,
foot,
foot,
foot,
foot,
molded
molded
molded
molded
molded
gray
gray
gray
gray
gray
jacket
jacket
jacket
jacket
jacket
AES/EBU 110 Ohm Digital Single Plug Patchcords
TT1*
TT2*
TT3*
TT4*
TT5*
TT6*
TT7*
TT8*
TT9*
TT10*
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
or
or
or
or
or
or
or
or
or
or
Bantam
Bantam
Bantam
Bantam
Bantam
Bantam
Bantam
Bantam
Bantam
Bantam
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
1 foot, molded
2 foot, molded
3 foot, molded
4 foot, molded
5 foot, molded
6 foot, molded
7 foot, molded
8 foot, molded
9 foot, molded
10 foot, molded
05AD05
2 foot, mono, male to male
05AK05
6 foot, mono, male to male
05AN05
10 foot, mono, male to male
05AU05
25 foot, mono, male to male
05AN15
10 foot, mono, male to RA male
05AN80
10 foot, mono, male to female
05AU80
25 foot, mono, male to female
10BF10
3 foot, stereo, male to male
10BK10
6 foot, stereo, male to male
10BN10
10 foot, stereo, male to male
15AK15
6 foot, mono, RA male to RA male
RCA
25AF25
3 foot, male to male
25AK25
6 foot, male to male
AES/EBU 110 Ohm Digital, or RS422 Dual Plug Patchcords
25AN25
10 foot, male to male
TTD1*
TTD2*
TTD3*
TTD4*
TTD5*
TTD6*
TTD7*
TTD8*
TTD9*
TTD10*
25AK82
6 foot, male to female
30AK30
6 foot, RA male to RA male
30AN30
10 foot, RA male to RA male
30AR30
15 foot, RA male to RA male
TT
TT
TT
TT
TT
TT
TT
TT
TT
TT
or
or
or
or
or
or
or
or
or
or
Bantam
Bantam
Bantam
Bantam
Bantam
Bantam
Bantam
Bantam
Bantam
Bantam
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
Nickel
1 foot, molded
2 foot, molded
3 foot, molded
4 foot, molded
5 foot, molded
6 foot, molded
7 foot, molded
8 foot, molded
8 foot, molded
10 foot, molded
1/4" to RCA
When ordering, add the following for cable color: BK-Black, BL-Blue, R-Red,
O-Orange, Y-Yellow, GN-Green, P-Purple, GY-Gray
DIMENSIONS ARE FOR REFERENCE ONLY
05AK25
6 foot, 1/4" male to RCA male
05AN25
10 foot, 1/4" male to RCA male
Uses either single or 2 cond, 22awg,
PVC outer jacket, braided shielded cable
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
45
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
46
Q-G® Audio Connector Series
A, AA, AAA Cord Style Series
Switchcraft offers a wide range of
cord style XLR connectors.
The A Series features a dual
pressure plate strain relief mechanism
to securely fasten the connector to
the cable. The A Series is also available
with FAS-DISCONNECT detent.
The AA Series features a 1-piece
strain relief mechanism that clamps
onto the outer jacket of the cable.
The AAA Series features a twist-on
handle with a built-in strain relief
mechanism and a pre-loaded insert.
The new R Series offers the same
strain relief system as the AAA Series.
A*M
AA*FB
Specifications
Electrical
Contact Resistance: 50 milliohm
maximum, per pole
Current Rating @ 125VAC:
3 pole - 15A, 4 pole -10A,
5 & 6 pole - 7.5A, 7 pole - 5A
Insulation Resistance: 1,000 MW,
minimum
Dielectric Withstanding Voltage:
1,000 V (rms)
Capacitance: )3pF between pins
and )6 pF between pins and
shell, maximum
Mechanical
Insertion/Withdrawal Forces:
10 lbs. maximum, 8 lbs. nominal/
7 lbs. maximum, 5 lbs. nominal
Materials
Shell: Die-Cast zinc with nickel
finish or black chrome
Handle: Die cast with nickel finish
or black chrome. Also black
thermoplastic handle available
O Ring: TPR (Thermoplastic rubber).
Insert Insulation: Molded
thermoplastic
Socket Contacts: Silver plated
copper alloy tarnish resistant;
bifurcated on 3 and 4 contact
types. Gold is available.
Pin Contacts: Silver plated
copper alloy.
See Page 56 for
Mechanical Drawings
AAA*FPBAUZ
AAA*MPZ
Resists tarnishing, and provides
excellent electrical conductivity.
Gold is available.
Latch lock: High strength die cast zinc
Multi-finger cable clamp and rubber
gasket: TPR (Thermoplastic
plastic & rubber)
Flex Relief: TPR (Thermoplastic rubber)
Ordering Information
Part Number
Style
Pins/
Finish Contacts
Notes
A*F, A*M
A*FB, A*MB
A*FBAU, A*MBAU
A*FL, A*ML
Cord
Cord
Cord
Cord
Nickel
Black
Black
Nickel
Silver
Silver
Gold
Silver
AA*F, AA*M
AA*FB, AA*MB
AA*FBAU, AA*MBAU
AA*FL, AA*ML
Cord
Cord
Cord
Cord
Nickel
Black
Black
Nickel
Silver
Silver
Gold
Silver
AAA*FZ, AAA*MZ
Cord
AAA*FBZ, AAA*MBZ
Cord
AAA*FBAUZ,
AAA*MBAUZ
Cord
AAA*FPZ, AAA*MPZ
Cord
AAA*FPBZ, AAA*MPBZ Cord
AAA*FPBAUZ,
AAA*MPBAUZ
Cord
* Available 3 - 7 pins or contacts
Nickel
Black
Silver
Silver
Standard Cable Clamp
Standard Cable Clamp
Standard Cable Clamp
Standard cable clamp,
large flex relief
One piece cable clamp
One piece cable clamp
One piece cable clamp
One piece cable clamp,
large flex relief
Twist-on metal handle
Twist-on metal handle
Black
Nickel
Black
Gold
Silver
Silver
Twist-on metal handle
Twist-on plastic handle
Twist-on plastic handle
Black
Gold
Twist-on plastic handle
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
Q-G® Audio Connector Series
B, C, D, E Panel Style Series
Switchcraft also offers a wide range
of panel mount connectors.
The B Series features a round
housing with a threaded collar for
mounting. The female version requires
a spanner wrench to tighten the
connector to the chassis. Both
male and female are available with
black finish.
The C Series is another round
housing panel mount, which has
0.140" mounting holes requiring
#5-40 screws to mount.
The D Series, our most popular
version, is a rectangle housing
panel mount. The standard Rawall
finish resists scratching, while the
optional satin finish offers a smooth
finish for mounting on a brushed
finished chassis.
The E Series offers a panel
mount with quick release inserts. A
small screwdriver is used to remove
the inserts, allowing for easy gender
changes. The male and female E
Series fit into the same panel cut-outs.
The E Series is also available
with PC terminals. Contact the
factory for details.
D*MS
D*F
D*MBAU
E3FSC
B*F
C*F
C*MB
B*MB
Ordering Information
Part Number
Style
Pins/
Contacts
Finish
B*F, B*M
Panel
B*FB, B*MB
Panel
C*F, C*M
Panel
C*FB, C*MB
Panel
D*F, D*M
Panel
D*FB, D*MB
Panel
D*FBAU, D*MBAU Panel
D*FS, D*MS
Panel
E3FSC, E3MSC
Panel
E3FSCB, E3MSCB
Panel
E3FSCBAU,
E3MSCBAU
Panel
* Available 3 - 7 pins or contacts
Notes
Nickel
Black
Nickel
Black
Nickel
Black
Black
Nickel
Nickel
Black
Silver
Silver
Silver
Silver
Silver
Silver
Gold
Silver
Silver
Silver
Threaded Collar
Threaded Collar
Uses #5-40 mounting screws
Uses #5-40 mounting screws
Uses #5-40 mounting screws
Rectangle housing
Rectangle housing
Rectangle housing, smooth finish
Male/Female same panel cut-out
Male/Female same panel cut-out
Black
Gold
Male/Female same panel cut-out
See Page 57 for Mechanical Drawings
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
47
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
48
Q-G® Audio Connector Series
J, K, P, R, T Wallplate, Gooseneck, Panel & Cord Style Series
The J and K Series are wallplates
using the D Series receptacles
pre-mounted. Available in single or
dual connector versions.
The PD Series is a plastic panel
mount series, using 94V-0 rated
material. Both male and female
mount into the same panel cut-out
and are available in solder cup,
straight PC, and right angle PC
terminals.
Switchcraft also offers gooseneck
connectors and cord plugs with
on-off switches. The P Series are
gooseneck connectors available in
male or female, with optional black
finishes. The male has external
5/8-27 threads, the female has internal
5/8-27 threads.
The new R Series incorporates
the same strain relief system as the
AAA Series. The insert can be offset
at 45˚ to accommodate a wide variety
of applications.
The T Series is similar to the
A Series female cord plug, but
offers a DPDT (2-C) locking on-off
switch. The slide switch is rated at
500mA, 125V.
K3FS
J3FS
T3F
P*F
PD3FSC1
R*M
P*M
Ordering Information
Pins/
Contacts
Part Number
Style
Finish
J3FS
K3FS
P*F, P*M
Wallplate
Wallplate
Gooseneck
Nickel
Nickel
Nickel
Silver
Silver
Silver
P*FB, P*MB
Gooseneck
Black
Silver
Black
Black
Nickel
Black
Black
Nickel
Silver
Gold
Silver
Silver
Gold
Silver
PD3FSC1, PD3MSC1
Panel
PD3FSC1AU, PD3MSC1AU Panel
R*FZ, R*MZ
Cord
R*FBZ, R*MBZ
Cord
R*FBAUZ, R*MBAUZ
Cord
T3F
Cord
* Available 3 - 7 pins or contacts
See Pages 58 and 59 for Mechanical Drawings
Notes
Single D3F
Dual D3F’s
Female ext. threads,
male int.threads
Female ext. threads,
male int.threads
Plastic Housing
Plastic Housing
Right Angle
Right Angle
Right Angle
On-off switch
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
Tini-Q-G® Connector Series
Tini-Q-G Cord & Panel Style Series
®
The Tini-QG Series is a miniature
version of the standard QG Series.
These “mini-XLR’s” come in a wide
variety of configurations. The standard
TA Series cord plugs are available in
3-6 pins or contacts. The L versions,
with their larger strain reliefs, are
available in 3-8 pins or contacts.The
TB and TY Series are panel mount
connectors. The TB Series is a male
connector, featuring a round panel
cut-out and 3-8 pins. The TY Series
is a female connector, featuring a
rectangular housing and 3-5 contacts.
The TA and TB Series are available with
a black finish. Gold-plated contacts
are available on all series. Contact
the factory for details.
TA*F
TA*FL
TA*MB
TB*M
TY*F
Specifications
Materials
Housing: Plugs and Male Receptacles
— Copper alloy, nickel-plated;
Female Receptacles — Die-cast
zinc, nickel-plated
Black Tini-Q-G® Housing: Copper
alloy, black chrome-plated
Pin and Socket Contacts: Copper
alloy, silver-plated
Flex Relief: Molded black
thermoplastic elastomer
Latch Button: Molded black
thermoplastic
Release Lever and Mounting
Washer: Steel, nickel-plated
Standoff/Ground Terminal and
Cable Clamp: Steel, electrotinned
Inserts and Insulating Spacer:
Molded, high strength thermoplastic
Latch (Female): Copper alloy,
nickel-plated
Mounting Nut: Copper alloy,
nickel-plated
Ordering Information
Part Number
Pins/
Style Finish Contacts Notes
TA*F, TA*M
TA*FL, TA*ML
Cord
Cord
Nickel
Nickel
Silver
Silver
TA*FB, TA*MB
TB*M
Cord
Panel
Black
Nickel
Silver
Silver
TB*MB
Panel
Black
Silver
TY*F
Panel
Nickel
Silver
Available in 3 - 6 pins or contacts
Accommodates large cable,
available in 3 - 8 pins or contacts
Available in 3 - 6 pins or contacts
Male, round flange, threaded,
available in 3 - 8 pins or contacts
Male, round flange, threaded,
available in 3 - 8 pins or contacts
Female, rectangle flange,
available in 3 - 5 pins or contacts
See Page 59 for Mechanical Drawings
Electrical
Contact Resistance: .010 ohms
maximum after life (and after
salt spray)
Current Rating (Carry Only): 5A,
125 VAC (4A, 125 VAC on 5
circuit) based on 30˚C maximum
Insulation Resistance: 510,000
megohms minimum @ 500
VDC (initial); 10,000 megohms
minimum (after humidity test)
Dielectric Strength: 1,000V (rms)
Mechanical
Life: 5,000 operations minimum
Solderability Standard: Meets EIA
RS-186-9E
Mechanical Shock: Meets
Mil-Std-202, method 213B
Vibration: Meets Mil-Std-202,
method 201A
Wire Size: #22 wire gauge solid;
#24 wire gauge stranded
Environmental
Thermal Range: -55˚C to +85˚C
Humidity: Meets Mil-Std-202,
method 106D
Thermal Shock: Meets
Mil-Std-202, method 107D
Salt Spray: Meets Mil-Std-202,
method 101
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
49
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
50
HPC Connector Series
HPC Panel Style Series
The HPC Series is a complete line
of high power loudspeaker connectors
that are completely compatible
with the Neutrik® Speakon® 4 pole
connector series. Included in the
series are round and rectangular
panel mounts, straight cord plugs,
right angle cord plugs, and in-line
cord plug, plus a barrel adapter.
The HPC panel mounts come
with two different flange depths,
either 0.100" or 0.200" depths. The
0.200" depth allows for easy rear
mounting of the connector and
maintains proper mating with the
cord plug. Also, the panel mounts
have two different Faston® terminal
sizes, 0.187" and 0.250" wide. Both
are rated at 50A, per UL 1977. The
PC mount versions have either
straight, right angle, or right angle
with a mounting post. They are
rated at 30A per UL 1977. The right
angle PC mount version with the post
allows for snap-in placement onto
the PC board during wave soldering.
The HPC cord plugs are offered
in straight, right angle, and an in-line
version. All have 0.250" Faston®
terminals, rated at 50A per UL
1977, which makes it easy to swap
out plugs. The unique feature of the
cord plugs is their “push to lock”
design. They do not require a 1/4
turn to engage the contacts – simply
push the connector in like an XLR.
This feature eliminates the need to
remember to turn the connector to
make contact with the contacts. To
disengage, simply push the latch lever
forward and pull the connector out.
The straight cord plug uses a twist
on handle, while the in-line and
right angle cord plugs use a snap-in
handle. The in-line connector mates
with both straight and right angle
cord plugs.
For those who find it more
convenient, we also offer a barrel
adapter which mates with either
straight or right angle cord plugs.
Speakon® is a registered trademark
of Neutrik Inc.
HPCP41F
HPCPR41F
HPCP410RA
Ordering Information
Part Number
Style
HPCP41F
HPCP42F
HPCP41F1
HPCP42F1
HPCP410PC
HPCP420PC
HPCP410RA
HPCP420RA
HPCPR41F
HPCPR42F
HPCPR41F1
HPCPR42F1
HPCPR410PC
HPCPR420PC
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Panel
Notes
Rectangle, 0.100" flange depth, 0.250" faston terms
Rectangle, 0.200" flange depth, 0.250" faston terms
Rectangle, 0.100" flange depth, 0.187" faston terms
Rectangle, 0.200" flange depth, 0.187" faston terms
Rectangle, 0.100" flange depth, straight PC terms
Rectangle, 0.200" flange depth, straight PC terms
Rectangle, 0.100" flange depth, right angle PC terms
Rectangle, 0.200" flange depth, right angle PC terms
Round, 0.100" flange depth, 0.250" faston terms
Round, 0.200" flange depth, 0.250" faston terms
Round, 0.100" flange depth, 0.187" faston terms
Round, 0.200" flange depth, 0.187" faston terms
Round, 0.100" flange depth, straight PC terms
Round, 0.200" flange depth, straight PC terms
See Pages 61 and 62 for Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
HPC Connector Series
HPC Cord, & Adapter Style Series
Specifications
HPC14F
HPCC4RAF
HPCC4F
Ordering Information
Part Number
Style
HPCC4F
HPCI4F
HPCC4RAF
Notes
Cord
Cord
Cord
Straight with 0.250" faston terms
Inline with 0.250" faston terms
Right angle with 0.250" faston terms
See Page 62 for Mechanical Drawings
Mechanical
(Panel and Cord Mounts)
Shock: Per Mil-Std 202,
Method 213B, Cond. K
Vibration: Mil-Std 202,
Method 201A
Life: 1,000 rotational cycles
Cable Range (cord mount):
10AWG, 0.560" cable OD
maximum
Electrical
(Panel and Cord Mounts)
Voltage Rating: 1,500 AC RMS,
per Mil-Std 202, Method 301
Current Rating (Faston® terminals): 50A RMS w/10AWG
wire, normal ambient, per
UL 1977
Current Rating (PC terminals):
30A per UL 1977
Contact Resistance: 1m1, 1.5m1
after 1,000 insertion/withdrawals
Insulation Resistance: > 2T 1
Environmental
(Panel and Cord Mounts)
Salt Spray: Mil-Std 202, Method
101D, Cond. B
Thermal Shock: Mil-Std 202,
Method 107G
Temperature Limits:
-55˚C to +85˚ C
Moisture Resistance: Mil-Std.
202, Method 106E
Life @ Ambient Temperature:
Mil-Std 202, Method 108A
Touchproof: IEC 65 and 1010-1
IP Rating: IEC 529, IP 25
Materials
(Panel and Cord Mounts)
Housings:
Thermoplastic UL 94V-0 rated
Seal Rings: Thermoplastic rubber
Contacts: Silver-plated over
copper alloy
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
51
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
52
EH Series Receptacles
The EH Series consist of different
styles of popular connectors in our
E Series housing. This allows the
end user to punch one single hole
size and populate wall plates, gang
assemblies with different types of
connectors. Connector styles
include BNC feed-throughs, RCA
feed-throughs, USB feed-throughs,
IEEE 1394 Firewire feed-throughs,
BNC to solder cup, and RCA to
BNC.
EHBNC2
Features
• Utilizes same panel cut-out as E
Series QG connectors
• Rugged metal shells
• Available with a wide variety of
popular feed-through
connectors
EHRCA2
Ordering Information
Part Number
Description
EHBNC2
EHBNCSC
EHRCA2
EHRCABNC
EHUSB2
EH13942
EHCAT62
BNC to BNC
BNC to solder cup
RCA to RCA
RCA to BNC
USB to USB
IEEE1394 to IEEE1394
Cat6 to Cat6
Note: For black finish add 'B' suffix
See Page 55 for Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
MIDI and 2500 Series
The 5-pin DIN connector has been
adopted by the audio industry as
the standard MIDI (Musical Instrument
Digital Interface) connector. Switchcraft
offers a wide variety of DIN and
mini-DIN connectors, however, only
the 5-pin DIN versions are shown in
this catalog. The more popular versions
used in the audio industry include
straight metal, straight plastic, and
right angle cord plugs, as well as
metal chassis and plastic right angle
PC mount versions.
The 2500 Series microphone
connectors are still used in many
retro-style microphones. Cable
mount versions can accommodate
cable OD’s up to 0.281".
57GB5F
05DL5M
57PC5FS
05BL5M
05GM5M
Specifications
Materials
Shell: Die-cast zinc alloy, nickel
plated
Receptacle Mounting Flange:
Steel
Receptacle Body: Plastic
Insert Material: Plastic
Socket Contacts: Tin-plated
Pin Contacts: Tin-plated
Switching Contacts: Silver-plated
Cable Relief Bushing: Soft plastic
2501M
Ordering Information
Part Number
Style
05BL5M
05GM5M
05DL5M
57GB5F
57PC5F
57PC5FS
2501F
2501M
2501MP
See Page 60 for
Mechanical Drawings
Cord
Cord
Cord
Panel
Panel
Panel
Cord
Cord
Panel
2501MP
Notes
Male, straight, metal handle
Male, straight, plastic handle
Male, right angle, metal handle
Female
Female, right angle, PC mount
Female, right angle, PC mount, shielded
Female, single contact, locking collar
Male, single contact, ext. threads
Male, single contact, ext. threads
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
53
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
54
HP75BNC Series
True 75 Ohm BNC Series
The HP75BNC Series is a true 75
Ohm impedance BNC connector
series. All connectors meet stringent
guidelines for top performance. The
HP75BNC Series is available in a
wide variety of cable types. All use
standard crimping tools.
HP75BNC1
Features and Benefits
• True 75 Ohm impedance
• Rugged nickel-plated, machined
housings
• Gold-plated center pins enhance
performance
Specifications
Electrical
Contact Resistance: 75 Ohms
Voltage Rating: 500 Volts RMS
Return Loss: Less than -25 db
at 3 GHz
Insulation Resistance:
5000 Megohms minimum
Mechanical
Lifecycles: 500 minimum
Center Contact Retention:
6 lbs. minimum
Coupling Mechanism:
100 lbs. minimum
Force to Engage:
2.5 lbs. maximum
Environmental
Thermal Range: -65˚C to 165˚C
Moisture Resistance: Mil Std 202
Corrosion: Mil Std 202
Flammability: UL 94-V0
Vibration: Mil Std 202
Solvent Resistance: Mil Std 202
Finish
Body/Bayonet: Nickel-plated,
copper alloy
Center Conductor: 50 mi
gold-plated copper alloy
See Next Page for
Mechanical Drawings
Ordering Information
Part Number Crimp Info
Cable Type
HP75BNC1
Pin .041 Hex
Ferrule .255
Belden 8241, 8279, 82241
Gepco VJ59U
Comm/Scope 5563
HP75BNC2
Pin .041 Hex
Ferrule .324 Hex
Belden 8281, 8281B, 9141, 88281, 9231, 8141,
9118, 9248
Gepco VP618PE, VP618PVC, VP6000
Comm/Scope 7501, 7506
HP75BNC7
Pin .041 Hex
Ferrule .278 Hex
Belden 1694A, 1695A, 87120, 89120, 9066, 9114, 9659
Gepco VSD2001, VSD2001TS
Comm/Scope 5729 ,5765, 2227K, 2227V, 2229V,
2275V, 2276V, 2279V
HP75BNC9
Pin .041 Hex
Ferrule .255 Hex
Belden 1505A, 1506A, 8212, 8241F, 9167, 9259,
Gepco VPM2000, VPM2000TS, VPM2000TK
Comm/Scope 2000, 5553, 5565, 5572
HP75BNC12
Pin .041 Hex
Ferrule .178 Hex
Belden 1855A, 1865A
Gepco VDM230, VDM250, RGB230/250 Series
Comm/Scope 7537, 7538
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
Connector Dimension Drawings
True 75 Ohm BNC Series, EH Series
HP75BNC Series
EHBNC2
EHRCA2
EHBNCSC
EHRCABNC
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
55
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
56
Connector Dimension Drawings
Q-G® Audio - A, AA, AAA Series
A*F
A*M
AA*F
AA*M
AAA*FZ
AAA*MZ
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
Connector Dimension Drawings
Q-G® Audio - B, C, D, E Series
B*F
B*M
C*F
C*M
D*F
D*M
E3FSC and E3MSC
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
57
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
58
Connector Dimension Drawings
Q-G® Audio - J, K, P, R Series
J3FS
K3FS
PD3FSC1AU
PD3MSC1AU
R*MZ
R*FZ
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
Connector Dimension Drawings
Q-G® Audio - T Series
T3F
TA*M
TA*F
TB*M
TY*F
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
59
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
60
Connector Dimension Drawings
MIDI, Q-G® Audio - P Series
05BL5M
05GM5M
57GB5F
57PC5F
P*F
P*M
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
Connector Dimension Drawings
HPC Panel Style Series
HPC
[F] TERMINALS
[F1] TERMINALS
[PC] TERMINALS
[RA] + [RAP] TERMINALS
DIMENSIONS ARE FOR REFERENCE ONLY
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
61
* Please visit the product pages on our website for the most up-to-date product information
CONNECTORS
62
Connector Dimension Drawings
HPC Panel Style Series
HPC
* Please visit the product pages on our website for the most up-to-date product information
AUDIO ADAPTERS
XLR to XLR, RCA, 1/4 ," TQ-G Adapter Series
A wide variety of audio adapters are available from
Switchcraft. Ranges include XLR to XLR, XLR to RCA,
XLR to 1/4", along with a multitude of specialty adapters.
Our DMX adapters allow users to adapt from 5 pin DMX
controls to the more prevalent 3 pin XLR.
389
S3FM
Ordering Information
Part Number
Description
XLR to
389
390
S3FM
S3F5M
S5F3M
XLR to
321
322
323
324
XLR to
383A
384A
386A
387A
XLR to
TA01
TA02
TA04
TA05
390
XLR
3 Pin female to 3 pin female
3 Pin male to 3 pin male
3 Pin male to 3 pin female
3 Pin female to 5 pin male
5 Pin female to 3 pin male
321
RCA
323
3 Pin female XLR to male RCA
3 Pin female XLR to female RCA
3 Pin male XLR to male RCA
3 Pin male XLR to female RCA
322
1/4"
3 Pin female XLR to female 1/4", 3 cond.
3 Pin male XLR to female 1/4", 3 cond.
3 Pin female XLR to male 1/4", 3 cond.
3 Pin male XLR to male 1/4", 3 cond.
324
TQ-G
3 Pin XLR female to 3 pin TQG female
4 Pin XLR female to 4 pin TQG female
3 Pin XLR male to 3 pin TQG female
4 Pin XLR male to 4 pin TQG female
386A
387A
383A
384A
TA04
DIMENSIONS ARE FOR REFERENCE ONLY
TA01
Inch
(mm)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
63
* Please visit the product pages on our website for the most up-to-date product information
AUDIO ADAPTERS
64
1/4" to 1/4", RCA; RCA to RCA; & Miscellaneous Adapter Series
352A
340
363
361A
345A
330P
336A
330F2
330F1
349A
374
332A
365
44
377
370A
376
Ordering Information
Part Number
Description
1/4" to 1/4"
361A
362A
363
340
352A
1/4" to RCA
330P
336A
345A
RCA to RCA
330F1
330F2
349A
Miscellaneous
332A
365
370A
374
376
377
44
Mono female to female
Stereo female to female
Mono male to male
2 Mono jacks parallel to mono plug
Stereo jack to mono plug
2 RCA jacks to mono plug, 4" cable
Female 1/4" to male RCA
Female RCA to male 1/4"
2 Female RCA parallel to 1 male RCA
1 Male and 1 female parallel to 1 male
Female to female
Old MC1M type to 1/4" female
Tini-Jax (.141") to RCA male
Female RCA to Tini-Plug (.141")
1/4" female to Tini-Plug (.141")
Tini-Jax (.141") to Micro-Plug (.097")
Micro-Jax (.097") to Tini-Plug (.141")
Female 2500 Series to 1/4" plug
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
Jack Series
Littel Phone, Hi-D, Right Angle PC Mount 1/4", 1/4" Extension Jack Series
Switchcraft offers an extensive variety of
1/4" commercial jacks. Littel phone jacks
offer open frame designs, Hi-D jacks offer
an enclosed, 94V-0 rated thermoplastic
housing, our RA jacks are designed for right
angle PC board layouts, and our Extension
jacks allow the end user to extend cable
lengths. All offer a wide range of options to
fit a multitude of needs. For mating plugs,
look to page 83 for all of the various options.
11
111
Specifications
114BPCS
Mechanical
Life: 10,000 insertion/withdrawal cycles,
minimum
Electrical
Contact Resistance: .030 ohms
maximum (initial), .050 ohms
maximum (after humidity, durability
exposure) Per Mil-Std-202E
Insulation Resistance: 10,000 MW
minimum (initial), 1,000 MW minimum
(after humidity)
Dielectric Withstanding Voltage: 500V,
60 Hz (rms) AC
Contact Rating: 1A, 25 VDC
Environmental
Thermal Range: -55˚C to +85˚C
(non-operating); -20˚C to +65˚C
(operating)
Thermal Shock: Per Mil-Std-202,
method 107
Humidity: Per Mil-Std-202, method 106
Salt Spray: Per Mil-Std 202, method 101
Materials
Mounting Bushing: Copper alloy,
nickel-plated
(RN & RA Series: Thermoplastic)
Insulation: Rigid plastic
Springs: Special copper alloy.
Integral contacts are standard in the isolated switching circuits
Sleeve Terminal: Copper alloy
Hardware: Supplied with one Number
P10001 copper alloy nickel-plated hex
nut, and one Number S1022
steel nickel-plated washer
Z15J
RN112APC
RA49B11
80
120
133
128
See next page for ordering information
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
65
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
66
Jack Series
Ordering Information
Part No.
Littel Phone Jacks
11
12A
12B
14B
Hi-D Jacks
111
112B
113BPC1M
114B
114BPC
114BPCS
114BPC1M
Typical
Description
Mating Plug
2
2
3
3
single open
single closed
double open
double closed
280
280
297
297
2
3
3
single open
double open
tip closed, ring open
(common to sleeve)
double closed
double closed
double closed
double closed
280
297
297 or
482NC
297
297
297
297 or
482NC
187B
Conductors
3
3
3
3
Z15J
2
single open
Right Angle PC Mount 1/4" Jacks
RA49B11
2
single open
RN112APC
2
single closed
RA49C14B
3
double closed
1/4" Extension Jacks
80
2
single open
88
2
single open
120
2
single open
121
2
single open
131
3
double open
133
3
double open
830
128
1238
3
2
3
double open
single open
double open
See Pages 72–74 for Mechanical Drawings
Notes
PC terms, accepts Littel
and Mil-type plugs
PC terms
Springlock PC terms
PC terms, accepts Littel and
Mil-type plugs, metric thread
15A rated
280
280
297
280
280
280
280
297
298
297
280
297
Screw terms, black handle
Solder terms, black handle
Screw terms, shielded handle
Solder terms, shielded handle
Solder terms, shielded handle
Solder terms, shielded handle,
locking
Screw terms, black handle
Solder terms, shielded handle
Solder terms, shielded handle
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
Jack Series
Thick Panel/Guitar, Locking 1/4", Tini, Tini-Extension, Micro, 3.5mm
The TP or Thick Panel jacks are typically used in applications such as loudspeaker enclosures and solid-body
guitars. Only premium materials are
used in the manufacture of these jacks.
Locking 1/4" jacks allow the end user
to lock the mating plug, providing
positive detent to the connection.
Also offered is a wide range of 1/8"
jacks and true 3.5mm jacks.
152B
151
152
153
Specifications - Thick Panel Series
& Locking Jacks
154
155
Electrical
Insulation Resistance: 2 x 106 MW
at 500 VDC per Mil-Std-202,
method 302 (initial)
Dielectric Withstanding Voltage:
1,000 VAC (ms)
Life: 10,000 cycles minimum
Environmental
Thermal Range: -55˚C to +85˚C
(non operating); -20˚C to +65˚C
(operating)
Thermal Shock: Per Mil-Std-202,
method 107
Humidity: Per Mil-Std-202, method
106
Salt Spray: Per Mil-Std-202, method
101
Materials
Shell - Locking Jacks: Die-cast
zinc, with satin nickel-plating;
Black chrome over nickel-plating
on special order
Insert and Latch: Thermoplastic,
UL94V-0
Latch Release: Nickel-plated
die-cast zinc
Contact Springs: Tin-plated
copper alloy
Mounting Bushing - Thick Panel
Jacks: Nickel-plated copper alloy
with knurled flange
Insulating Spacer: Rigid plastic
E111L
35RAPC7J
125
42A
142A
35RAPC2BH3
35PM2A
(continued on next page)
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
67
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
68
Jack Series
(continued from previous page)
Insulator/Spring Mount:
Thermo-plastic
Springs: Copper alloy
Terminals: Tip: Copper alloy; Ring:
(Number 152B only) Copper
alloy; Sleeve: Steel, tin-plated
Hardware - Thick Panel Jacks:
Supplied with one, Number
P10531 nickel-plated copper
alloy hex nut; and one, Number
P1476 nickel-plated copper
alloy flat washer
Specifications - 35RAPC Series
Electrical
Contact Resistance: 20 milliohms
maximum
Insulation Resistance: 100
milliohms minimum at 250 VDC
Dielectric Withstanding Voltage:
250 VAC
Life: 5,000 cycles, minimum
Insertion Force: 0.88 pounds 3.5 pounds
Withdrawal Force: 0.88 pounds 2.64 pounds
Materials
Coil Spring: Steel Wire
Bushing: Nickel-plated copper alloy
Terminal: Silver-plated copper alloy
Tip Spring: Silver-plated copper alloy
Shunt Terminal: Plated copper alloy
Cover: Thermoplastic, transparent
UL 94V-2
Body: Thermoplastic, UL 94V-1
black color
Specifications - 35PM Series
& Tini Jack Series
Electrical
Contact Resistance: .075 ohms
maximum
Insulation Resistance: 5,000 MW
minimum
Dielectric Withstanding Voltage:
250 VAC maximum
Life: 5,000 insertion/withdrawal
cycles, minimum
Contact Rating: .25A, 48 VDC
Materials
Mounting Bushing: Nickel-plated
copper alloy
Insulating Spacers: Rigid plastic
Springs: Copper alloy
Sleeve Terminal: Tin-plated
copper alloy
Hardware: Supplied with one,
Number P11501 nickel-plated
brass locknut; and one, Number
S17901 nickel-plated steel
flat washer
Ordering Information
Typical
Part No. Conductors Description Mating Plug Notes
Thick Panel/Guitar Jacks (1/4")
151
2
single open
152
3
double open
152B
3
double open
153
2
single open
280
297
297
280
154
155
297
297
3
3
double open
double open
Locking 1/4" Jacks
E111L
2
single open
E112BL
3
double open
Tini-Jacks (.141")
41
2
single open
42A
2
single closed
142A
2
single closed
PC142A
2
single closed
Tini-Extension Jacks (.141")
125
2
single open
3.5mm Jacks
35RAPC2AV
2
single closed
35RAPC2BH3
3
double open
35RAPC3BH3
3
tip closed, ring open
35RAPC4BH3
3
double closed
35RAPC7J
3
top jack dual open
35HDNN
35HDNN
35HDNN
35HDNN
35RAPC7JS
3
top jack dual open
35HDNN
35PM1
35PM2A
2
2
single open
single closed
750
750
See Pages 75-79 for Mechanical Drawings
Nickel finish
Brass finish
Nickel finish
Gold-plated springs,
electro-polish brass finish,
9/16-12 UNC wood thread
Gold-plated, no cable clamp
Black satin chrome finish,
no cable clamp
280
297
750
750
750
750
PC terms
750
Threaded bushing, PC terms
Threaded bushing, PC terms
Threaded bushing, PC terms
Threaded bushing, PC terms
Dual vertical jack
bottom jack dual closed
Dual vertical jack, shielded
bottom jack dual closed
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
69
Jack Series
Phono, Phono Extension, TT or Bantam, MT 1/4" Jack Series
Phono jacks, more commonly called RCA jacks offer low
cost, two conductor connections. TT or bantam jacks are
the same type used in our audio patchbays. Typically
used in high end studio applications. MT or 1/4" jacks are
just a bigger version of the TT jacks. Same high quality,
just in a larger package.
3514PC
3501FR
Specifications - Phono Jacks
Materials
Frame and Shell: Steel, plated
Center Terminal: Plated copper alloy (3517PC); Plated
copper alloy (3514PC)
Insulator: Thermoplastic (3514PC) Ceramic and glass
filled thermoplastic (3517PC)
For 3515PC Only:
Contact and Saddle: Spring type copper alloy, copper
alloy pre-tinned
Shell: Steel or copper alloy, plated
Insulator Bushing: Ceramic
Insulator Spacer: Glass-filled thermoplastic
3501FP
3503
Specifications - TT and MT Jacks
Mechanical
Life: Commercial – 30,000 insertion/withdrawal
cycles, minimum; Military – 30,000 insertion/
withdrawal cycles, minimum
Mechanical Shock: Military – Per Mil-Std-202,
method 213, Test Condition H (75g)
Vibration: Military – Per Mil-Std-202, method 213,
(10-55 Hz)
Electrical
Contact Resistance: Commercial – .030 ohms maximum
(initial), .050 ohms maximum (after humidity, durability,
exposure); Military – .010 ohms maximum (initial),
.020 ohms maximum (after life), .10 ohms maximum
(after salt spray)
Insulation Resistance: Commercial – 10,000 M1
minimum (initial), 1,000 M1 minimum (after humidity);
Military – 10,000 M1 minimum (initial), 1,000 M1
minimum (after humidity, durability exposure)
Dielectric Withstanding Voltage: 500V, 60 Hz (rms) AC
(continued on next page)
YMT334BN
TT34BNY
5555 North Elston Avenue / Chicago, IL 60630
Phone: 773-792-2700 / Fax: 773-792-2129
w
w
w
.
s
w
i
t
c
h
c
r
a
f
t
.
c
o
m
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
70
Jack Series
(continued from previous page)
Environmental
Thermal Range: Commercial –55˚C to +85˚C (non-operating), 20˚C to +65˚C (operating);
Military –
-55˚C to +85˚C (non operating), 40˚C to +65˚C
(operating)
Thermal Shocks: Commercial –
Per Mil-Std-202, method 107;
Military – Per Mil-Std-202,
method 107
Humidity: Commercial –
Per Mil-Std-202, method 106;
Military — 0% to 95% operating
and non-operating
Salt Spray: Commercial –
Per Mil-Std-202, method 101;
Military – Per Mil-Std-202,
method 101 (48 hours)
Moisture Resistance: Military –
Per Mil-Std-202, method 106
(240 hours)
Materials
Frame: Steel, nickel plated
Springs: Copper alloy
Contacts: Welded, crossbar, gold
plated
Ordering Information
Part No.
Conductors
Typical
Description
Mating Plug
Notes
Phono Jacks
3501FP
2
single open
3502A
Front mounting
3501FR
2
single open
3502A
Rear mounting
3514PC
2
single open
3502A
Right angle, PC mount
3517PC
2
single open
3502A
Right angle, PC mount
BPJR**
2
single open
3502A
Rear mounting, colored insulators
BPJR**AU
2
single open
3502A
Same as above, with gold-plating
BPJF**
2
single open
3502A
Front mounting, colored insulators
BPJF**AU
2
single open
3502A
Same as above, with gold-plating
BPJJ**
2
single open
3502A
Feed through mount
BPJJ**AU
2
single open
3502A
Same as above, with gold-plating
Phone Extension Jacks
3503
2
single open
3502A
TT or Bantam Jacks
TT34B
3
double closed
TT253NC
TT34BNY
3
double closed
TT253NC
Nickel-plated frame, fanned terminals
WTT34B
3
double closed
TT253NC
Wire-wrap terminals
MT 1/4" Jacks
MT334B
3
double closed
482NC
WMT334B
3
double closed
482NC
Wire-wrap terminals
YMT334BN
3
double closed
482NC
Nickel-plated frame, fanned terminals
** To designate color of insulator, use: 01– Black, 02 – Red, 03 – White, 04 – Yellow, 05 - Blue, 06 - Green
See Pages 80-82 for Mechanical Drawings
* Please visit the product pages on our website for the most up-to-date product information
JACKS & PLUGS
Power/Jacks Plugs Series
700, S700, 800 Cord & Panel Style Series
Low power AC to DC power jacks
and plugs are used throughout the
audio industry, to power a